Merge branch 'master' into debounce_refactor

# Conflicts:
#	tmk_core/common/keyboard.c

7 files changed, 338 insertions, 0 deletions

diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h
new file mode 100644
index 000000000..67034ef8c
--- /dev/null
+++ b/keyboards/rama/m6_b/config.h
@@ -0,0 +1,163 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x006B // 6-B
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA M6-B
+#define DESCRIPTION     RAMA M6-B Macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for M6-B specifics
+#define RGB_BACKLIGHT_M6_B
+
+// enable/disable LEDs based on layout
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+43)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 78
+// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/rama/m6_b/info.json b/keyboards/rama/m6_b/info.json
new file mode 100644
index 000000000..c88a3cc61
--- /dev/null
+++ b/keyboards/rama/m6_b/info.json
@@ -0,0 +1,19 @@
+{
+  "keyboard_name": "m6-b",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 3,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        { "x": 0, "y": 0 },
+        { "x": 1, "y": 0 },
+        { "x": 2, "y": 0 },
+        { "x": 0, "y": 1 },
+        { "x": 1, "y": 1 },
+        { "x": 2, "y": 1 }
+      ]
+    }
+  }
+}
diff --git a/keyboards/rama/m6_b/keymaps/default/keymap.c b/keyboards/rama/m6_b/keymaps/default/keymap.c
new file mode 100644
index 000000000..7a408fa8a
--- /dev/null
+++ b/keyboards/rama/m6_b/keymaps/default/keymap.c
@@ -0,0 +1,16 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    LAYOUT(
+        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
+
diff --git a/keyboards/rama/m6_b/m6_b.c b/keyboards/rama/m6_b/m6_b.c
new file mode 100644
index 000000000..581b31d75
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b.c
@@ -0,0 +1,18 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_M6_B
+#error RGB_BACKLIGHT_M6_B not defined, you done goofed somehao, brah
+#endif
diff --git a/keyboards/rama/m6_b/m6_b.h b/keyboards/rama/m6_b/m6_b.h
new file mode 100644
index 000000000..bd4158bcb
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b.h
@@ -0,0 +1,28 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT(                         \
+    K00, K01, K02, K03, K04, K05)       \
+    {                                   \
+        {K00, K01, K02, K03, K04, K05}, \
+    }
+
diff --git a/keyboards/rama/m6_b/readme.md b/keyboards/rama/m6_b/readme.md
new file mode 100644
index 000000000..d6bdd0c4c
--- /dev/null
+++ b/keyboards/rama/m6_b/readme.md
@@ -0,0 +1,15 @@
+# RAMA M6-B
+
+![RAMA M6-B](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/59fc7b1053450adf5bf9a852/1515932239307/RAMA-RAMA-M6-DSA-XO-CAPS.73-3_1.jpg?format=1500w)
+
+A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA M6-B PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/m6_b:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/rama/m6_b/rules.mk b/keyboards/rama/m6_b/rules.mk
new file mode 100644
index 000000000..b7a76b8dd
--- /dev/null
+++ b/keyboards/rama/m6_b/rules.mk
@@ -0,0 +1,79 @@
+# project specific files
+SRC =	keyboards/zeal60/zeal60.c \
+		keyboards/zeal60/rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3218.c \
+		drivers/avr/i2c_master.c
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+