diff options
| author | skullY <skullydazed@gmail.com> | 2017-08-17 00:08:16 +0200 |
|---|---|---|
| committer | Jack Humbert <jack.humb@gmail.com> | 2017-08-17 02:36:59 +0200 |
| commit | 4e73b0b8d7750bcddc445b5a52008d4c6cea977d (patch) | |
| tree | e6c54f5d0b334f1e0acc41b6406e8b26900f80b0 /keyboards/sixkeyboard | |
| parent | 2ee0dc7793165eacfe7ee2a4994d557294988f18 (diff) | |
| download | qmk_firmware-4e73b0b8d7750bcddc445b5a52008d4c6cea977d.tar.gz qmk_firmware-4e73b0b8d7750bcddc445b5a52008d4c6cea977d.tar.xz | |
Make the bulk of our keyboards match the readme.md standard
Diffstat (limited to 'keyboards/sixkeyboard')
| -rw-r--r-- | keyboards/sixkeyboard/readme.md | 17 |
1 files changed, 14 insertions, 3 deletions
diff --git a/keyboards/sixkeyboard/readme.md b/keyboards/sixkeyboard/readme.md index 7d78a0cae..a2fc9eb46 100644 --- a/keyboards/sixkeyboard/readme.md +++ b/keyboards/sixkeyboard/readme.md @@ -1,6 +1,17 @@ -# Techkeys SixKeyBoard +Techkeys SixKeyBoard +=== -[Get one here!](http://techkeys.us/collections/accessories/products/sixkeyboard) +Keyboard Maintainer: QMK Community +Hardware Supported: Techkeys SixKeyBoard PCB +Hardware Availability: http://techkeys.us/collections/accessories/products/sixkeyboard + +Make example for this keyboard (after setting up your build environment): + + make sixkeyboard-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Hardware Info The schematic is like this: @@ -15,4 +26,4 @@ The schematic is like this: The LED on the bottom is `C4`. All 7 of the leds are turned on when the keyboard boots-up in the `sixkeyboard.c` file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit. -There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.
\ No newline at end of file +There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object. |