move sixshooter into bpiphany directory and edit readme

8 files changed, 0 insertions, 368 deletions

diff --git a/keyboards/sixshooter/config.h b/keyboards/sixshooter/config.h
deleted file mode 100644
index ed890d3c9..000000000
--- a/keyboards/sixshooter/config.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6666
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    bpiphany
-#define PRODUCT         sixshooter
-#define DESCRIPTION     A PCB for the CM Storm switch tester utilizing a Teensy 2.0.
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS {  }
-#define MATRIX_COL_PINS { F7, F6, F1, F5, F4, F0 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
diff --git a/keyboards/sixshooter/info.json b/keyboards/sixshooter/info.json
deleted file mode 100644
index 79044589d..000000000
--- a/keyboards/sixshooter/info.json
+++ /dev/null
@@ -1,13 +0,0 @@
-{
-  "keyboard_name": "SixShooter",
-  "maintainer": "qmk",
-  "url": "https://geekhack.org/index.php?topic=70033.0",
-  "width": 3,
-  "height": 2,
-  "layouts": {
-    "LAYOUT": {
-      "key_count": 6,
-      "layout": [{"label":"K00", "x":0, "y":0}, {"label":"K01", "x":1, "y":0}, {"label":"K02", "x":2, "y":0}, {"label":"K03", "x":0, "y":1}, {"label":"K04", "x":1, "y":1}, {"label":"K05", "x":2, "y":1}]
-    }
-  }
-}
diff --git a/keyboards/sixshooter/keymaps/default/keymap.c b/keyboards/sixshooter/keymaps/default/keymap.c
deleted file mode 100644
index 51f115d93..000000000
--- a/keyboards/sixshooter/keymaps/default/keymap.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Copyright 2018 QMK Community
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _FN 1
-
-// Define keyboard specific keycodes for controlling on/off for all LEDs as they
-// are all on different pins with this PCB, rather than a single backlight pin
-enum custom_keycodes {
-    SS_LON = SAFE_RANGE,
-    SS_LOFF
-};
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Base Layer: Media Keys
-     * ,-----------.
-     * |FN | V-| V+|
-     * |---+---+---|
-     * |Prv|Ply|Nxt|
-     * `-----------'
-     */
-  [_BL] = LAYOUT( /* Base */
-    MO(_FN), KC_VOLD, KC_VOLU, \
-    KC_MPRV, KC_MPLY, KC_MNXT  \
-  ),
-    /* FN Layer: LED control
-     * ,-----------.
-     * |FN | V-| V+|
-     * |---+---+---|
-     * |Prv|Ply|Nxt|
-     * `-----------'
-     */
-  [_FN] = LAYOUT(
-    KC_TRNS, SS_LON, SS_LOFF, \
-    KC_NO,   KC_NO,  KC_NO
-  ),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	// Put your per-action keyboard code here.
-	// Runs for every action, just before processing by the firmware.
-  if (record->event.pressed) {
-
-    // Check for custom keycodes for turning on and off LEDs
-    switch(keycode) {
-      case SS_LON:
-        sixshooter_led_all_on();
-        return false;
-      case SS_LOFF:
-        sixshooter_led_all_off();
-        return false;
-    }
-  }
-  return true;
-};
-
-void matrix_init_user(void) {
-  // Default all LEDs to on
-  sixshooter_led_all_on();
-}
diff --git a/keyboards/sixshooter/keymaps/default/readme.md b/keyboards/sixshooter/keymaps/default/readme.md
deleted file mode 100644
index 050a6f234..000000000
--- a/keyboards/sixshooter/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for sixshooter
diff --git a/keyboards/sixshooter/readme.md b/keyboards/sixshooter/readme.md
deleted file mode 100644
index 1fcf26a51..000000000
--- a/keyboards/sixshooter/readme.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# The Six Shooter
-
-A PCB for the CM Storm switch tester utilizing a Teensy 2.0 designed by Bpiphany. Because the PCB was designed with individual pins for each LED, there are custom keycodes (`SS_LON` and `SS_LOFF`) for turning on and off the backlight LEDs.
-
-Keyboard Maintainer: QMK Community\
-Hardware Supported: Six Shooter PCB, Teensy 2.0\
-Hardware Availability: [GeekHack.org](https://geekhack.org/index.php?topic=70033.0)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make sixshooter:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/sixshooter/rules.mk b/keyboards/sixshooter/rules.mk
deleted file mode 100644
index 5bf8d2165..000000000
--- a/keyboards/sixshooter/rules.mk
+++ /dev/null
@@ -1,64 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = halfkay
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/sixshooter/sixshooter.c b/keyboards/sixshooter/sixshooter.c
deleted file mode 100644
index 87a739454..000000000
--- a/keyboards/sixshooter/sixshooter.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include "sixshooter.h"
-
-extern inline void sixshooter_led_0_on(void);
-extern inline void sixshooter_led_1_on(void);
-extern inline void sixshooter_led_2_on(void);
-extern inline void sixshooter_led_3_on(void);
-extern inline void sixshooter_led_4_on(void);
-extern inline void sixshooter_led_5_on(void);
-
-extern inline void sixshooter_led_0_off(void);
-extern inline void sixshooter_led_1_off(void);
-extern inline void sixshooter_led_2_off(void);
-extern inline void sixshooter_led_3_off(void);
-extern inline void sixshooter_led_4_off(void);
-extern inline void sixshooter_led_5_off(void);
-
-extern inline void sixshooter_led_all_on(void);
-extern inline void sixshooter_led_all_off(void);
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
diff --git a/keyboards/sixshooter/sixshooter.h b/keyboards/sixshooter/sixshooter.h
deleted file mode 100644
index 490d562d0..000000000
--- a/keyboards/sixshooter/sixshooter.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef SIXSHOOTER_H
-#define SIXSHOOTER_H
-
-#include "quantum.h"
-
-#define LAYOUT( \
-	K00, K01, K02, \
-	K03, K04, K05 \
-) { \
-	{ K00, K01, K02, K03, K04, K05 }, \
-}
-
-inline void sixshooter_led_0_on(void)    { DDRB |=  (1<<6); PORTB |=  (1<<6); }
-inline void sixshooter_led_1_on(void)    { DDRC |=  (1<<7); PORTC |=  (1<<7); }
-inline void sixshooter_led_2_on(void)    { DDRD |=  (1<<0); PORTD |=  (1<<0); }
-inline void sixshooter_led_3_on(void)    { DDRB |=  (1<<5); PORTB |=  (1<<5); }
-inline void sixshooter_led_4_on(void)    { DDRD |=  (1<<7); PORTD |=  (1<<7); }
-inline void sixshooter_led_5_on(void)    { DDRB |=  (1<<7); PORTB |=  (1<<7); }
-
-inline void sixshooter_led_0_off(void)   { DDRB &= ~(1<<6); PORTB &= ~(1<<6); }
-inline void sixshooter_led_1_off(void)   { DDRC &= ~(1<<7); PORTC &= ~(1<<7); }
-inline void sixshooter_led_2_off(void)   { DDRD &= ~(1<<0); PORTD &= ~(1<<0); }
-inline void sixshooter_led_3_off(void)   { DDRB &= ~(1<<5); PORTB &= ~(1<<5); }
-inline void sixshooter_led_4_off(void)   { DDRD &= ~(1<<7); PORTD &= ~(1<<7); }
-inline void sixshooter_led_5_off(void)   { DDRB &= ~(1<<7); PORTB &= ~(1<<7); }
-
-inline void sixshooter_led_all_on(void) {
-  sixshooter_led_0_on();
-  sixshooter_led_1_on();
-  sixshooter_led_2_on();
-  sixshooter_led_3_on();
-  sixshooter_led_4_on();
-  sixshooter_led_5_on();
-}
-inline void sixshooter_led_all_off(void) {
-  sixshooter_led_0_off();
-  sixshooter_led_1_off();
-  sixshooter_led_2_off();
-  sixshooter_led_3_off();
-  sixshooter_led_4_off();
-  sixshooter_led_5_off();
-}
-
-#endif