Add files via upload

7 files changed, 291 insertions, 0 deletions

diff --git a/keyboards/uk78/Makefile b/keyboards/uk78/Makefile
new file mode 100644
index 000000000..57b2ef62e
--- /dev/null
+++ b/keyboards/uk78/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
diff --git a/keyboards/uk78/config.h b/keyboards/uk78/config.h
new file mode 100644
index 000000000..081f6b407
--- /dev/null
+++ b/keyboards/uk78/config.h
@@ -0,0 +1,76 @@
+/*

+Copyright 2012 Jun Wako <ukkeyboards@gmail.com>

+

+This program is free software: you can redistribute it and/or modify

+it under the terms of the GNU General Public License as published by

+the Free Software Foundation, either version 2 of the License, or

+(at your option) any later version.

+

+This program is distributed in the hope that it will be useful,

+but WITHOUT ANY WARRANTY; without even the implied warranty of

+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+GNU General Public License for more details.

+

+You should have received a copy of the GNU General Public License

+along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x554B /* Ascii */
+#define PRODUCT_ID      0x004E
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    UK Keyboards
+#define PRODUCT         UK78
+#define DESCRIPTION     QMK keyboard firmware for UK78
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 19
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F3, F2, F1, F0, A0 }
+#define MATRIX_COL_PINS { A2, A1, F5, F4, E6, E7, E5, E4, B7, D0, D1, D2, D3, D4, D5, D6, D7, B5, E0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* ws2812b options */
+#define RGB_DI_PIN F6
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
\ No newline at end of file
diff --git a/keyboards/uk78/keymaps/default/keymap.c b/keyboards/uk78/keymaps/default/keymap.c
new file mode 100644
index 000000000..759b4120a
--- /dev/null
+++ b/keyboards/uk78/keymaps/default/keymap.c
@@ -0,0 +1,119 @@
+#include "uk78.h"

+

+// Helpful defines

+#define _______ KC_TRNS

+

+// Each layer gets a name for readability, which is then used in the keymap matrix below.

+// The underscores don't mean anything - you can have a layer called STUFF or any other name.

+// Layer names don't all need to be of the same length, obviously, and you can also skip them

+// entirely and just use numbers.

+#define _BL 0

+#define _FL1 1

+#define _FL2 2

+

+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

+    /* _BL: Base Layer(Default) - For ISO enter use ANSI \

+    * ,-------------------------------------------------------------------------------.

+    * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| /|BSpc| Del|  P/|  P*|  P-|

+    * |-------------------------------------------------------------------------------|

+    * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |  P7|  P8|  P9|  P=|

+    * |-------------------------------------------------------------------------------|

+    * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| #| Ent|  P4|  P5|  P6|  P+|

+    * |-------------------------------------------------------------------------------|

+    * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|  P1|  P2|  P3|SLck|

+    * |-------------------------------------------------------------------------------|

+    * |Ctrl|Win |Alt |        Space        |Alt|Mo(1)|Ctrl|Lef|Dow| Rig|  P0|  P.|PEnt|

+    * `-------------------------------------------------------------------------------'

+    */

+    [_BL] = KEYMAP(

+        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_DEL,  KC_PSLS, KC_PAST, KC_PMNS,

+        KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSLS, KC_P7,   KC_P8,   KC_P9,   KC_PEQL,

+        KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,           KC_ENT,  KC_P4,   KC_P5,   KC_P6,   KC_PPLS,

+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,   KC_C,    KC_V,  KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  KC_RSFT, KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_SLCK,

+        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                             KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT),

+    /* _FL1: Function Layer 1 - For ISO enter use ANSI \

+    * ,-------------------------------------------------------------------------------.

+    * |  `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck|    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |     |   |   |   |RST|   |   |   |   |   |   |   |   |     |    |    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |       |   |   |   |   |   |Hu+|Va+|Sa+|   |   |   |  |    |    |    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |     |   |   |   |   |RGB|Hu-|Va-|Sa-|Bl-|Bl+|   |Mute|Vol+|    |    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |    |    |    |      BL_Toggle       |   |   |   |    |Vol-|    |    |    |    |

+    * `-------------------------------------------------------------------------------'

+    */

+    [_FL1] = KEYMAP(

+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS,

+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC,  BL_INC,  KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

+        KC_TRNS, KC_TRNS, KC_TRNS,                            BL_TOGG,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),

+    /* _FL2: Function Layer 2 - For ISO enter use ANSI \

+    * ,-------------------------------------------------------------------------------.

+    * |   |  |   |   |   |   |   |   |   |   |   |   |   |    |   |    |    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |    |    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |     |   |   |   |   |   |   |   |   |   |   |   |    |    |    |    |    |    |

+    * |-------------------------------------------------------------------------------|

+    * |    |    |    |                      |   |   |   |    |    |    |    |    |    |

+    * `-------------------------------------------------------------------------------'

+    */

+    [_FL2] = KEYMAP(

+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 

+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),

+

+

+};

+

+

+void matrix_init_user(void) {

+}

+

+void matrix_scan_user(void) {

+}

+

+bool process_record_user(uint16_t keycode, keyrecord_t *record) {

+	return true;

+}

+

+void led_set_user(uint8_t usb_led) {

+

+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {

+		

+	} else {

+		

+	}

+

+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {

+		DDRA |= (1 << 3); PORTA |= (1 << 3);

+	} else {

+		DDRA &= ~(1 << 3); PORTA &= ~(1 << 3);

+	}

+

+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {

+		

+	} else {

+		

+	}

+

+	if (usb_led & (1 << USB_LED_COMPOSE)) {

+		

+	} else {

+		

+	}

+

+	if (usb_led & (1 << USB_LED_KANA)) {

+		

+	} else {

+		

+	}

+

+}
\ No newline at end of file
diff --git a/keyboards/uk78/readme.md b/keyboards/uk78/readme.md
new file mode 100644
index 000000000..ac163e5e0
--- /dev/null
+++ b/keyboards/uk78/readme.md
@@ -0,0 +1,16 @@
+# UK78

+

+![UK78](http://i.imgur.com/42pg6RS.png)

+

+A fully customizable 60%+numpad keyboard.

+

+* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)

+* Hardware Supported: UK78 PCB

+  * rev2 

+* Hardware Availability: [ukkeyboards.](https://clueboard.co/)

+

+Make example for this keyboard (after setting up your build environment):

+

+    make uk78-default

+

+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

diff --git a/keyboards/uk78/rules.mk b/keyboards/uk78/rules.mk
new file mode 100644
index 000000000..4e8d14812
--- /dev/null
+++ b/keyboards/uk78/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=8192
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes
\ No newline at end of file
diff --git a/keyboards/uk78/uk78.c b/keyboards/uk78/uk78.c
new file mode 100644
index 000000000..3611427d0
--- /dev/null
+++ b/keyboards/uk78/uk78.c
@@ -0,0 +1 @@
+#include "uk78.h"
diff --git a/keyboards/uk78/uk78.h b/keyboards/uk78/uk78.h
new file mode 100644
index 000000000..6cc5eee47
--- /dev/null
+++ b/keyboards/uk78/uk78.h
@@ -0,0 +1,20 @@
+#ifndef UK78_H
+#define UK78_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, K116, K117, K118, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, K216, K217, K218, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413, K414, K415, K416, K417, K418  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115,  K116,  K117,  K118 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO, K214,  K215,  K216,  K217,  K218 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  K317,  K318 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  K414,  K415,  K416,  K417,  K418 }  \
+}
+
+#endif
\ No newline at end of file