Added my keymap (#2529)

* Added my keymap

* maybe that wasn't quite right.

* Reduced the tap time to register layer

* changed the tapping term that fits my typing speed a little better

* Added retro tapping and reduced tapping term duration

6 files changed, 208 insertions, 0 deletions

diff --git a/keyboards/amj40/keymaps/myee/build.sh b/keyboards/amj40/keymaps/myee/build.sh
new file mode 100644
index 000000000..6b4b4568f
--- /dev/null
+++ b/keyboards/amj40/keymaps/myee/build.sh
@@ -0,0 +1,42 @@
+#!/bin/bash
+# adjust for cpu 
+# -j 16 gave best result on a hyperthreaded quad core core i7
+
+LIMIT=10
+THREADS="-j 16"
+KMAP=iso_split_rshift
+
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+
+function wait_bootloader {
+	echo "Waiting for Bootloader..."
+	local STARTTIME=$(date +"%s")
+	local REMIND=0
+    local EXEC=dfu-programmer
+    local TARGET=atmega32u4
+	while true
+	do
+		sudo $EXEC $TARGET get > /dev/null 2>&1
+		[ $? -eq 0 ] && break
+		ENDTIME=$(date +"%s")
+		DURATION=$(($ENDTIME-$STARTTIME))
+		if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
+		then 
+			echo "Did you forget to press the reset button?"
+			REMIND=1
+		fi
+        sleep 1
+	done
+}
+make clean
+make KEYMAP=${KMAP} ${THREADS}
+if [[ $? -eq 0 ]]
+then
+    echo "please trigger flashing!"
+    wait_bootloader
+    sudo make KEYMAP=${KMAP} dfu ${THREADS}
+else
+    echo "make failed"
+    exit 77
+fi
diff --git a/keyboards/amj40/keymaps/myee/config.h b/keyboards/amj40/keymaps/myee/config.h
new file mode 100644
index 000000000..8e6c4dfa4
--- /dev/null
+++ b/keyboards/amj40/keymaps/myee/config.h
@@ -0,0 +1,10 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+#include "../../config.h"
+
+#define TAPPING_TERM 25
+#define RETRO_TAPPING
+#define PERMISSIVE_HOLD
+
+
+#endif
\ No newline at end of file
diff --git a/keyboards/amj40/keymaps/myee/keymap.c b/keyboards/amj40/keymaps/myee/keymap.c
new file mode 100644
index 000000000..b36d6c61e
--- /dev/null
+++ b/keyboards/amj40/keymaps/myee/keymap.c
@@ -0,0 +1,114 @@
+
+
+
+#include "amj40.h"
+
+// Keymap myee
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// increase readability 
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_QWERTY] = KEYMAP( \
+        KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,\
+        F(2),    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,         \
+        KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,        \
+        KC_LCTL, KC_LGUI,KC_LALT, F(0),          F(1),           KC_RGUI,KC_RALT, KC_RCTL                  \
+		),
+
+	[_LOWER] = KEYMAP( \
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_UP,   KC_MINS, KC_EQL, KC_DEL, \
+		_______, _______, KC_ASTR, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQUO, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSLS,         \
+		_______, _______, _______, KC_LPRN, KC_RPRN, KC_HOME, KC_PGUP, KC_PGDN, KC_END, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, _______, _______                                     \
+		),
+	
+    [_RAISE] = KEYMAP( \
+        KC_GRV,  KC_LPRN, KC_RPRN, KC_DQUO, KC_QUOT, KC_SCLN, KC_COLON,KC_UNDS, KC_PLUS, _______, _______, KC_BSPC, \
+		_______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,             \
+		_______, _______, _______, KC_LCBR, KC_RCBR, _______, _______, _______, _______, _______, _______,          \
+		_______, _______, _______, _______, _______, _______, BL_INC,  BL_DEC                                      \
+		),
+	
+    [_ADJUST] = KEYMAP( \
+        _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,         \
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,         \
+		KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______                             \
+		),
+
+};
+
+enum function_id {
+    LAUNCH,
+    RGBLED_TOGGLE,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
+	[1]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
+	[2]  = ACTION_LAYER_TAP_KEY(_ADJUST,KC_TAB),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+   
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ 
+  switch (keycode) {
+    
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/amj40/keymaps/myee/readme.md b/keyboards/amj40/keymaps/myee/readme.md
new file mode 100644
index 000000000..2659292ae
--- /dev/null
+++ b/keyboards/amj40/keymaps/myee/readme.md
@@ -0,0 +1,11 @@
+AMJ40 Default Layout
+=====================
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+# Features
+* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers.
+* View the keymap.c file to understand they layout of the keymap.
+* Has keys to toggle both the switch LEDs and underglow LEDs.
+
diff --git a/keyboards/amj40/keymaps/myee/rules.mk b/keyboards/amj40/keymaps/myee/rules.mk
new file mode 100644
index 000000000..034e697bc
--- /dev/null
+++ b/keyboards/amj40/keymaps/myee/rules.mk
@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/amj40/keymaps/myee/updatemerge.sh b/keyboards/amj40/keymaps/myee/updatemerge.sh
new file mode 100644
index 000000000..da5457e19
--- /dev/null
+++ b/keyboards/amj40/keymaps/myee/updatemerge.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+git checkout amj60      # gets you on branch amj60
+git fetch origin        # gets you up to date with origin
+git merge origin/master