Merge remote-tracking branch 'upstream/master' into bananasplit

# Conflicts:
#	keyboards/bananasplit/Makefile
#	keyboards/bananasplit/bananasplit.c
#	keyboards/bananasplit/bananasplit.h
#	keyboards/bananasplit/config.h
#	keyboards/bananasplit/keymaps/default/keymap.c
#	keyboards/bananasplit/rules.mk

74 files changed, 2278 insertions, 462 deletions

diff --git a/keyboards/amj40/Makefile b/keyboards/amj40/Makefile
new file mode 100755
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/amj40/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/amj40/amj40.c b/keyboards/amj40/amj40.c
new file mode 100755
index 000000000..5a2376999
--- /dev/null
+++ b/keyboards/amj40/amj40.c
@@ -0,0 +1,30 @@
+#include "amj40.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
+}
diff --git a/keyboards/amj40/amj40.h b/keyboards/amj40/amj40.h
new file mode 100755
index 000000000..ab629cba7
--- /dev/null
+++ b/keyboards/amj40/amj40.h
@@ -0,0 +1,38 @@
+#ifndef AMJ40_H
+#define AMJ40_H
+
+#include "quantum.h"
+
+// readability  
+#define XXX KC_NO
+
+/* AMJ40 ver2.0 layout1 配列一
+ * ,-----------------------------------------------------------.
+ * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B |
+ * |-----------------------------------------------------------|
+ * | 10   | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1B    |
+ * |-----------------------------------------------------------|
+ * | 20     | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 |  2A | 2B |
+ * |-----------------------------------------------------------|
+ * | 30  | 31 | 32  |   34      |  35         | 39  | 3A | 3B  |
+ * `-----------------------------------------------------------'
+ */
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19,      k1b,  \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,  \
+    k30, k31, k32,      k34, k35,                k39, k3a, k3b  \
+) { \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1b}, \
+    {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \
+    {k30, k31, k32, XXX, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \
+}
+
+
+
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/amj40/config.h b/keyboards/amj40/config.h
new file mode 100755
index 000000000..411011122
--- /dev/null
+++ b/keyboards/amj40/config.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6072
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Han Chen
+#define PRODUCT         AMJ40
+#define DESCRIPTION     qmk port of AMJ40 v2 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F4, F5, F6, F7}
+#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/amj40/keymaps/default/Makefile b/keyboards/amj40/keymaps/default/Makefile
new file mode 100755
index 000000000..034e697bc
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/Makefile
@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/amj40/keymaps/default/build.sh b/keyboards/amj40/keymaps/default/build.sh
new file mode 100755
index 000000000..6b4b4568f
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/build.sh
@@ -0,0 +1,42 @@
+#!/bin/bash
+# adjust for cpu 
+# -j 16 gave best result on a hyperthreaded quad core core i7
+
+LIMIT=10
+THREADS="-j 16"
+KMAP=iso_split_rshift
+
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+
+function wait_bootloader {
+	echo "Waiting for Bootloader..."
+	local STARTTIME=$(date +"%s")
+	local REMIND=0
+    local EXEC=dfu-programmer
+    local TARGET=atmega32u4
+	while true
+	do
+		sudo $EXEC $TARGET get > /dev/null 2>&1
+		[ $? -eq 0 ] && break
+		ENDTIME=$(date +"%s")
+		DURATION=$(($ENDTIME-$STARTTIME))
+		if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
+		then 
+			echo "Did you forget to press the reset button?"
+			REMIND=1
+		fi
+        sleep 1
+	done
+}
+make clean
+make KEYMAP=${KMAP} ${THREADS}
+if [[ $? -eq 0 ]]
+then
+    echo "please trigger flashing!"
+    wait_bootloader
+    sudo make KEYMAP=${KMAP} dfu ${THREADS}
+else
+    echo "make failed"
+    exit 77
+fi
diff --git a/keyboards/amj40/keymaps/default/keymap.c b/keyboards/amj40/keymaps/default/keymap.c
new file mode 100755
index 000000000..13b48c2ad
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/keymap.c
@@ -0,0 +1,173 @@
+
+
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "amj40.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+
+
+
+
+// increase readability 
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+        /* Default Layer
+     * ,-----------------------------------------------------------.
+     * | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+     * |-----------------------------------------------------------|
+     * | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+     * |-----------------------------------------------------------|
+     * | LSft   |  Z |  X |  C |  V |  B |  N |  M |  ,  |  . | /? |
+     * |-----------------------------------------------------------|
+     * | LCtl | LGui| LAlt|  spc fn0  |  spc fn1    |fn2|RAlt|RCtl |
+     * `-----------------------------------------------------------'
+     */
+    [_QWERTY] = KEYMAP( \
+        KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,\
+        KC_TAB,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,\
+        KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,\
+        KC_LCTL, KC_LGUI, KC_LALT,          F(0),           F(1),        F(2), KC_RALT, KC_RCTL \
+		),
+
+    /* Function Layer 1 HHKB style
+     * ,-----------------------------------------------------------.
+     * |   ~  |   !   |  @  | # | $ | % | ^ | & | * | ( | ) | Bkspc|
+     * |-----------------------------------------------------------|
+     * |   F1   | F2 | F3 | F4 | F5 |  F6 | _ | + | [ | ] |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |    F7    | F8 | F9 |  F10  |  F11 |  F12 | End|PgDn| ↓ |     |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             | Stop| App|     |
+     * `-----------------------------------------------------------'
+     */
+    [_LOWER] = KEYMAP( \
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, \
+		_______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+		),
+	
+	/* Function Layer 1 HHKB style
+     * ,-----------------------------------------------------------.
+     * |Caps|    |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus|  ↑ | Ins| Del|
+     * |-----------------------------------------------------------|
+     * |      | 🔇 | ⏏ |    |  * |  / |Hone|PgUp|  ← |  → |       |
+     * |-----------------------------------------------------------|
+     * |        | 🔉 | 🔊 |    |  + |  - | End|PgDn| ↓ |     |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             | Stop| App|     |
+     * `-----------------------------------------------------------'
+     */
+    [_RAISE] = KEYMAP( \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, KC_DEL, \
+		_______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG \
+		),
+	
+	/* Function Layer 1 HHKB style
+     * ,-----------------------------------------------------------.
+     * |Caps|    |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus|  ↑ | Ins| Del|
+     * |-----------------------------------------------------------|
+     * |      | 🔇 | ⏏ |    |  * |  / |Hone|PgUp|  ← |  → |       |
+     * |-----------------------------------------------------------|
+     * |        | 🔉 | 🔊 |    |  + |  - | End|PgDn| ↓ |     |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             | Stop| App|     |
+     * `-----------------------------------------------------------'
+     */
+    [_ADJUST] = KEYMAP( \
+        _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+		_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, _______, _______, _______,  _______,  \
+		_______, _______, _______, RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_HUD,  RGB_SAI,  RGB_SAD,  RGB_VAI,  RGB_VAD, \
+		KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \
+		),
+
+    
+
+};
+
+
+		
+
+enum function_id {
+    LAUNCH,
+    RGBLED_TOGGLE,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
+	[1]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC),
+	[2]  = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI),
+
+};
+
+
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+   
+    return MACRO_NONE;
+};
+
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ 
+  switch (keycode) {
+    
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/amj40/keymaps/default/readme.md b/keyboards/amj40/keymaps/default/readme.md
new file mode 100755
index 000000000..2659292ae
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/readme.md
@@ -0,0 +1,11 @@
+AMJ40 Default Layout
+=====================
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+# Features
+* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers.
+* View the keymap.c file to understand they layout of the keymap.
+* Has keys to toggle both the switch LEDs and underglow LEDs.
+
diff --git a/keyboards/amj40/keymaps/default/updatemerge.sh b/keyboards/amj40/keymaps/default/updatemerge.sh
new file mode 100755
index 000000000..da5457e19
--- /dev/null
+++ b/keyboards/amj40/keymaps/default/updatemerge.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+git checkout amj60      # gets you on branch amj60
+git fetch origin        # gets you up to date with origin
+git merge origin/master
diff --git a/keyboards/amj40/keymaps/fabian/Makefile b/keyboards/amj40/keymaps/fabian/Makefile
new file mode 100755
index 000000000..a914e4c0c
--- /dev/null
+++ b/keyboards/amj40/keymaps/fabian/Makefile
@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/amj40/keymaps/fabian/keymap.c b/keyboards/amj40/keymaps/fabian/keymap.c
new file mode 100755
index 000000000..aef514153
--- /dev/null
+++ b/keyboards/amj40/keymaps/fabian/keymap.c
@@ -0,0 +1,236 @@
+#include "amj40.h"
+
+// Set the custom keymap
+#undef KEYMAP
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b,  \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,  \
+    k30, k31, k32, k33, k34, k35,                k39, k3a, k3b  \
+) { \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \
+    {k30, k31, k32, k33, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \
+}
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Custom
+#define CTL_ESC CTL_T(KC_ESC)  // Tap for Escape, hold for Control
+#define SFT_ENT SFT_T(KC_ENT)  // Tap for Enter, hold for Shift
+#define SFT_BSP SFT_T(KC_BSPC) // Tap for Backspace, hold for Shift
+#define HPR_TAB ALL_T(KC_TAB)  // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift)
+// #define MEH_GRV MEH_T(KC_GRV)  // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift)
+
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  | Lower and Space | Raise and Bksp | GUI  |AltGr | Ctrl |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  HPR_TAB, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  SFT_BSP, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT , \
+  F(2),    KC_LCTL, KC_LALT, KC_LGUI,          F(0),             F(1),             KC_RGUI, KC_RALT, KC_RCTL \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  | Lower and Space | Raise and Bksp | GUI  |AltGr | Ctrl |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+  HPR_TAB, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+  CTL_ESC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  SFT_BSP, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT , \
+  F(2),    KC_LCTL, KC_LALT, KC_LGUI,          F(0),             F(1),             KC_RGUI, KC_RALT, KC_RCTL \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  | Lower and Space | Raise and Bksp | GUI  |AltGr | Ctrl |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+  HPR_TAB, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  CTL_ESC, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  SFT_BSP, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_ENT , \
+  F(2),    KC_LCTL, KC_LALT, KC_LGUI,          F(0),             F(1),             KC_RGUI, KC_RALT, KC_RCTL \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | MS L | MS D |MS U  | MS R |MS Btn|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1, \
+  _______, _______, _______, _______,          _______,          _______,          KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | Left | Down |  Up  | Rght |MS_BN2|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_BTN2, \
+  _______, _______, _______, _______,          _______,          _______,          KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Reset |Colemk|Qwerty|Dvorak|      |      |      |      |  MU  |      |      |Reset |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |AGNorm|AGSwap|      |      |      |      |  ML  |  MD  |  MR  |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |AudOn |AudOff|      |      |      |      |MBtn1 |MBtn2 |MBtn3 |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = KEYMAP( \
+  RESET,   COLEMAK, QWERTY,  DVORAK,  _______, _______, _______, _______, KC_MS_U, _______, _______, RESET, \
+  _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \
+  _______, AU_ON,   AU_OFF,  _______, _______, _______, _______, KC_BTN1, KC_BTN2, KC_BTN3, _______, _______, \
+  _______, _______, _______, _______,          _______,          _______,          _______, _______, _______ \
+)
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+const uint16_t PROGMEM fn_actions[] = {
+        [0]  = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC),
+        [1]  = ACTION_LAYER_TAP_KEY(_RAISE, KC_BSPC),
+        [2]  = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/amj40/readme.md b/keyboards/amj40/readme.md
new file mode 100755
index 000000000..e705f20fe
--- /dev/null
+++ b/keyboards/amj40/readme.md
@@ -0,0 +1,35 @@
+AMJ40 keyboard firmware
+======================
+DIY/Assembled compact 40% keyboard.
+
+Ported by N.Hou from the original TMK firmware.
+
+*Supports both backlight LEDs as well as RGB underglow. 
+
+*For reference, the AMJ40 uses pin D3 for underglow lighting.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/amj40
+folder. Once your dev env is setup, you'll be able to type `make` to generate
+your .hex - you can then use `make dfu` to program your PCB once you hit the
+reset button. 
+
+Depending on which keymap you would like to use, you will have to compile
+slightly differently.
+
+### Default
+To build with the default keymap, simply run `sudo make all`.
+The .hex file will appear in the root of the qmk firmware folder.
+
+
+
+
+### Original tmk firmware
+The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ40).
+
+
diff --git a/keyboards/amj40/rules.mk b/keyboards/amj40/rules.mk
new file mode 100755
index 000000000..18403ac32
--- /dev/null
+++ b/keyboards/amj40/rules.mk
@@ -0,0 +1,66 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= yes # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      ?= no  # MIDI controls
+AUDIO_ENABLE     ?= no
+UNICODE_ENABLE   ?= no  # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/bananasplit/Makefile b/keyboards/bananasplit/Makefile
index 687afba30..57b2ef62e 100644
--- a/keyboards/bananasplit/Makefile
+++ b/keyboards/bananasplit/Makefile
@@ -1,18 +1,3 @@
-# Copyright 2017 Balz Guenat
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif
diff --git a/keyboards/bananasplit/README.md b/keyboards/bananasplit/README.md
new file mode 100644
index 000000000..b059a0834
--- /dev/null
+++ b/keyboards/bananasplit/README.md
@@ -0,0 +1,29 @@
+# BananaSplit60 keyboard firmware
+
+Ported from evangs/tmk_keyboard
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme](/).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/bananasplit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|jack|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/bananasplit/bananasplit.c b/keyboards/bananasplit/bananasplit.c
index 766e662db..1aa8fb174 100644
--- a/keyboards/bananasplit/bananasplit.c
+++ b/keyboards/bananasplit/bananasplit.c
@@ -1,18 +1,3 @@
-/* Copyright 2017 Balz Guenat
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
 #include "bananasplit.h"
 
 void matrix_init_kb(void) {
diff --git a/keyboards/bananasplit/bananasplit.h b/keyboards/bananasplit/bananasplit.h
index aeb27da10..fa4c13258 100644
--- a/keyboards/bananasplit/bananasplit.h
+++ b/keyboards/bananasplit/bananasplit.h
@@ -1,18 +1,19 @@
-/* Copyright 2017 Balz Guenat
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #ifndef BANANASPLIT_H
 #define BANANASPLIT_H
 
@@ -31,18 +32,18 @@
 |  K40  |  K41  |  K42  |     K44     |  K45  |     K46     | K48 | K49 | K4A | K4B | K4C |
 -------------------------------------------------------------------------------------------
 */
-#define KEYMAP( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
-    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,\
-    K40, K41, K42,      K44, K45, K46,      K48, K49, K4A, K4B, K4C  \
-) { \
-    { K00, K01,   K02, K03,   K04, K05, K06, K07,   K08, K09, K0A, K0B, K0C, K0D   }, \
-    { K10, K11,   K12, K13,   K14, K15, K16, K17,   K18, K19, K1A, K1B, K1C, K1D   }, \
-    { K20, K21,   K22, K23,   K24, K25, K26, K27,   K28, K29, K2A, K2B, K2C, KC_NO }, \
-    { K30, KC_NO, K32, K33,   K34, K35, K36, K37,   K38, K39, K3A, K3B, K3C, K3D   }, \
-    { K40, K41,   K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C, KC_NO }  \
+#define KEYMAP(                                                                     \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,           \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           \
+    K40, K41, K42,      K44, K45, K46,      K48, K49, K4A, K4B, K4C                 \
+) {                                                                                 \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D },       \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D },       \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO },     \
+    { K30, KC_NO,    K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D },  \
+    { K40, K41, K42, KC_NO,    K44, K45, K46, KC_NO,    K48, K49, K4A, K4B, K4C, KC_NO }   \
 }
 /* Here is the above keymap filled with KC_TRNS. It's a useful starting point when defining layers.
 KEYMAP( \
@@ -54,6 +55,48 @@ KEYMAP( \
 )
 */
 
+#define KEYMAP_HHKBANANA(                                                           \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D,      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,                \
+    K40, K41, K42,      K44, K45, K46,      K48, K49, K4A, K4B, K4C                 \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D },       \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D },       \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D },       \
+    { K30, KC_NO,   K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \
+    { K40, K41, K42, KC_NO,    K44, K45, K46, KC_NO,    K48, K49, K4A, K4B, K4C, KC_NO }   \
+}
+
+#define KEYMAP_ANSI( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,           \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,           \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,                \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,                \
+    K40, K41, K42,           K45,           K48, K49,      K4B, K4C                 \
+) {                                                                                 \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D },       \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D },       \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO },     \
+    { K30, KC_NO,   K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \
+    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    K48, K49, KC_NO,  K4B, K4C, KC_NO }  \
+}
+
+#define KEYMAP_ISO( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+    K40, K41, K42,           K45,           K48, K49,      K4B, K4C  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \
+    { K40, K41, K42, KC_NO,    KC_NO,    K45, KC_NO,    KC_NO,    K48, K49, KC_NO,    K4B, K4C, KC_NO }  \
+}
+
 /*
 -------------------------------------------------------------------------------------------
 | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | K2D |
@@ -69,16 +112,31 @@ KEYMAP( \
 */
 #define KEYMAP_ALL( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,           \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      \
-    K40, K41, K42,      K44, K45, K46,      K48, K49, K4A, K4B, K4C            \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+    K40, K41, K42,      K44, K45, K46,      K48, K49, K4A, K4B, K4C  \
 ) { \
-    { K00, K01, K02, K03,   K04, K05, K06, K07,   K08, K09, K0A, K0B, K0C, K0D   }, \
-    { K10, K11, K12, K13,   K14, K15, K16, K17,   K18, K19, K1A, K1B, K1C, K1D   }, \
-    { K20, K21, K22, K23,   K24, K25, K26, K27,   K28, K29, K2A, K2B, K2C, K2D   }, \
-    { K30, K31, K32, K33,   K34, K35, K36, K37,   K38, K39, K3A, K3B, K3C, K3D   }, \
-    { K40, K41, K42, KC_NO, K44, K45, K46, KC_NO, K48, K49, K4A, K4B, K4C, KC_NO }  \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+    { K40, K41, K42, KC_NO,    K44, K45, K46, KC_NO,    K48, K49, K4A, K4B, K4C, KC_NO }  \
 }
 
+#define KEYMAP_HHKB_ARROW( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,\
+    K40, K41, K42,      K44, K45, K46,      K48, K49, K4A, K4B, K4C  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+    { K40, K41, K42, KC_NO,    K44, K45, K46, KC_NO,    K48, K49, K4A, K4B, K4C, KC_NO }  \
+}
+
+
 #endif
diff --git a/keyboards/bananasplit/config.h b/keyboards/bananasplit/config.h
index 6d92deb0c..bf8d9377c 100644
--- a/keyboards/bananasplit/config.h
+++ b/keyboards/bananasplit/config.h
@@ -1,5 +1,5 @@
 /*
-Copyright 2017 Balz Guenat
+Copyright 2012 Jun Wako <wakojun@gmail.com>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -32,114 +32,33 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
 #define MATRIX_ROW_PINS { B0, B2, B4, B5, B6 }
 #define MATRIX_COL_PINS { F5, B1, F0, F1, F4, B3, D7, D6, D4, D5, D3, D2, D1, D0 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
- 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 1
-
+#define DIODE_DIRECTION ROW2COL
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
+/* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
+#define BACKLIGHT_LEVELS  1
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY  5
+#define TAPPING_TERM      175
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
+/* key combination for command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
-//#define MAGIC_KEY_HELP2          SLASH
-//#define MAGIC_KEY_DEBUG          D
-//#define MAGIC_KEY_DEBUG_MATRIX   X
-//#define MAGIC_KEY_DEBUG_KBD      K
-//#define MAGIC_KEY_DEBUG_MOUSE    M
-//#define MAGIC_KEY_VERSION        V
-//#define MAGIC_KEY_STATUS         S
-//#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
-//#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER1         1
-//#define MAGIC_KEY_LAYER2         2
-//#define MAGIC_KEY_LAYER3         3
-//#define MAGIC_KEY_LAYER4         4
-//#define MAGIC_KEY_LAYER5         5
-//#define MAGIC_KEY_LAYER6         6
-//#define MAGIC_KEY_LAYER7         7
-//#define MAGIC_KEY_LAYER8         8
-//#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
-//#define MAGIC_KEY_LOCK           CAPS
-//#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_NKRO           N
-//#define MAGIC_KEY_SLEEP_LED      Z
+
 
 /*
  * Feature disable options
@@ -159,27 +78,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
-   - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
-   - MIDI notes can be added to the keymap
-   - Octave shift and transpose
-   - Virtual sustain, portamento, and modulation wheel
-   - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
 #endif
diff --git a/keyboards/bananasplit/keymaps/default/keymap.c b/keyboards/bananasplit/keymaps/default/keymap.c
index 9aa65fb7e..f07278df9 100644
--- a/keyboards/bananasplit/keymaps/default/keymap.c
+++ b/keyboards/bananasplit/keymaps/default/keymap.c
@@ -1,75 +1,25 @@
-/* Copyright 2017 Balz Guenat
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
 #include "bananasplit.h"
 
+#define DEFAULT_LAYER 0
+#define LAYER_1       1
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/*
--------------------------------------------------------------------------------------------
-| Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
--------------------------------------------------------------------------------------------
-|  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    |
--------------------------------------------------------------------------------------------
-| CapsLck |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
--------------------------------------------------------------------------------------------
-|    Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |RSFT_T(/)| Up  |Light|
--------------------------------------------------------------------------------------------
-| Ctrl  |  GUI  |  Alt  |    Enter    |  App  |    Space    | Alt |Ctrl |Left |Down |Right|
--------------------------------------------------------------------------------------------
-*/
-[0] = KEYMAP( \
-    KC_ESC,  KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
-    KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
-    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, BL_STEP,\
-    KC_LCTL, KC_LGUI, KC_LALT, KC_ENT, KC_APP, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
-),
+  [DEFAULT_LAYER] = KEYMAP(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
+    KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC, KC_BSLS, \
+    KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,   KC_QUOT, KC_ENT, \
+    KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  RSFT_T(KC_SLSH),  KC_UP, _______, \
+    KC_LCTL,  KC_LGUI,  KC_LALT, KC_ENT,      MO(LAYER_1),      KC_SPC,  KC_RALT, KC_RCTL,  KC_LEFT, KC_DOWN, KC_RIGHT
+  ),
+
+  [LAYER_1] = KEYMAP( \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______,          _______, _______, _______,          _______, _______, _______, _______, _______ \
+  ),
 };
 
 const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
 };
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
diff --git a/keyboards/bananasplit/keymaps/default/readme.md b/keyboards/bananasplit/keymaps/default/readme.md
index 9e8eeb5bd..aaf6daa08 100644
--- a/keyboards/bananasplit/keymaps/default/readme.md
+++ b/keyboards/bananasplit/keymaps/default/readme.md
@@ -1,17 +1 @@
 # The default keymap for the Bananasplit
-
-```
--------------------------------------------------------------------------------------------
-| Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
--------------------------------------------------------------------------------------------
-|  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \    |
--------------------------------------------------------------------------------------------
-| CapsLck |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
--------------------------------------------------------------------------------------------
-|    Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |RSFT_T(/)| Up  |Light|
--------------------------------------------------------------------------------------------
-| Ctrl  |  GUI  |  Alt  |    Enter    |  App  |    Space    | Alt |Ctrl |Left |Down |Right|
--------------------------------------------------------------------------------------------
-```
-
-The `RSFT_T(/)` key works as `/` when tapped and as right shift when held.
diff --git a/keyboards/bananasplit/keymaps/hhkbanana/keymap.c b/keyboards/bananasplit/keymaps/hhkbanana/keymap.c
new file mode 100644
index 000000000..10593de8d
--- /dev/null
+++ b/keyboards/bananasplit/keymaps/hhkbanana/keymap.c
@@ -0,0 +1,25 @@
+#include "bananasplit.h"
+
+#define DEFAULT_LAYER 0
+#define LAYER_1       1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [DEFAULT_LAYER] = KEYMAP_HHKBANANA( \
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS,   KC_PSCR, \
+    KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,  KC_LBRC,  KC_RBRC, KC_BSPC, \
+    KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,   KC_QUOT,  KC_ENT, \
+    KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,  KC_DOT,  KC_SLSH,  KC_RSFT, \
+    KC_LCTL,  KC_LGUI,  KC_LALT, KC_ENT,      MO(LAYER_1),      KC_SPC,  KC_RALT, KC_RCTL,  KC_LEFT, KC_DOWN, KC_RIGHT \
+  ),
+
+  [LAYER_1] = KEYMAP_HHKBANANA( \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______,          _______, _______, _______,          _______, _______, _______, _______, _______ \
+  ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/keyboards/bananasplit/keymaps/nic/keymap.c b/keyboards/bananasplit/keymaps/nic/keymap.c
new file mode 100644
index 000000000..f9794b5b1
--- /dev/null
+++ b/keyboards/bananasplit/keymaps/nic/keymap.c
@@ -0,0 +1,45 @@
+#include "bananasplit.h"
+
+#define DEFAULT_LAYER 0
+#define THUMB_LAYER   1
+#define NORMAN_LAYER  2
+#define MOD_LAYER     3
+
+#define HYPER_TAB ALL_T(KC_TAB)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [DEFAULT_LAYER] = KEYMAP_HHKB_ARROW( \
+    KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, \
+    HYPER_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC, KC_BSPC, \
+    CTL_T(KC_ESC),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,  KC_QUOT, KC_ENT, \
+    KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,  KC_DOT,  RSFT_T(KC_SLSH),  KC_UP, TG(NORMAN_LAYER), \
+    KC_CAPS,  KC_LALT,  KC_LGUI,  KC_SPC,      MO(THUMB_LAYER),      KC_SPC,  KC_LGUI, KC_LALT,  KC_LEFT, KC_DOWN, KC_RIGHT \
+  ),
+
+  [THUMB_LAYER] = KEYMAP_HHKB_ARROW( \
+    MO(MOD_LAYER), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \
+    _______,  _______,   _______,   _______,   _______,   _______,   _______,   KC_UNDS,   KC_PLUS,   KC_LCBR,   KC_RCBR,   _______, _______, _______, \
+    _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_MINS,   KC_EQL,   KC_LBRC, KC_RBRC,  _______, _______, \
+    _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,  _______,  _______,  _______, _______, \
+    _______,  _______,  _______, _______,      _______,      _______,  _______, _______,  _______, _______, _______ \
+  ),
+
+  [NORMAN_LAYER] = KEYMAP_HHKB_ARROW( \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______,  _______,   _______,   KC_D,   KC_F,   KC_K,   KC_J,   KC_U,   KC_R,   KC_L,   KC_SCLN,   _______, _______, _______, \
+    _______,   _______,   _______,   KC_E,   KC_T,  _______,   KC_Y,   KC_N,   KC_I,   KC_O,   KC_H,  _______, _______, \
+    _______,   _______,   _______,   _______,   _______,   _______,   KC_P,   _______,   _______,  _______,  _______,  _______, _______, \
+    _______,  _______,  _______, _______,      _______,      _______,  _______, _______,  _______, _______, _______ \
+  ),
+
+  [MOD_LAYER] = KEYMAP_HHKB_ARROW( \
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______,  _______,   _______,   _______,  RESET,  _______,   _______,   _______,   _______,   _______,   _______,   _______, _______, _______, \
+    _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,  _______, _______, \
+    _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,  _______,  _______,  _______, _______, \
+    _______,  _______,  _______, _______,      _______,      _______,  _______, _______,  _______, _______, _______ \
+  ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/keyboards/bananasplit/rules.mk b/keyboards/bananasplit/rules.mk
index 00c144bc0..04579d4ce 100644
--- a/keyboards/bananasplit/rules.mk
+++ b/keyboards/bananasplit/rules.mk
@@ -1,4 +1,5 @@
 # MCU name
+#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.
@@ -48,20 +49,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 
 # Build Options
-#   change yes to no to disable
+#   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk
index 0efa78550..1aee5313c 100644
--- a/keyboards/deltasplit75/rules.mk
+++ b/keyboards/deltasplit75/rules.mk
@@ -73,15 +73,3 @@ USE_I2C ?= yes
 SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/eco/Makefile b/keyboards/eco/Makefile
index 30b43c4ea..b9bada8f8 100644
--- a/keyboards/eco/Makefile
+++ b/keyboards/eco/Makefile
@@ -1,4 +1,4 @@
-SUBPROJECT_DEFAULT = rev1
+SUBPROJECT_DEFAULT = rev2
 
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h
index af7e1822c..99b057496 100644
--- a/keyboards/eco/config.h
+++ b/keyboards/eco/config.h
@@ -73,5 +73,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef SUBPROJECT_rev1
     #include "rev1/config.h"
 #endif
+#ifdef SUBPROJECT_rev2
+    #include "rev2/config.h"
+#endif
 
 #endif
diff --git a/keyboards/eco/eco.h b/keyboards/eco/eco.h
index 9da33b9b8..2cfb8df26 100644
--- a/keyboards/eco/eco.h
+++ b/keyboards/eco/eco.h
@@ -4,6 +4,10 @@
 #ifdef SUBPROJECT_rev1
     #include "rev1.h"
 #endif
+#ifdef SUBPROJECT_rev2
+    #include "rev2.h"
+#endif
+
 
 #include "quantum.h"
 
diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md
index 8fef3a1ce..d29aa8ece 100644
--- a/keyboards/eco/readme.md
+++ b/keyboards/eco/readme.md
@@ -10,6 +10,6 @@ Hardware Supported: ECO PCB rev1 Pro Micro
 
 Make example for this keyboard (after setting up your build environment):
 
-    make eco-rev1-that_canadian
+    make eco-rev2-that_canadian
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file
diff --git a/keyboards/eco/rev2/Makefile b/keyboards/eco/rev2/Makefile
new file mode 100644
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/eco/rev2/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/eco/rev2/config.h b/keyboards/eco/rev2/config.h
new file mode 100644
index 000000000..83f2defc9
--- /dev/null
+++ b/keyboards/eco/rev2/config.h
@@ -0,0 +1,30 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include "../config.h"
+
+#define DEVICE_VER      0x0002
+
+/* ECO V2.1 pin-out */
+#define MATRIX_ROW_PINS { D7, B5, B4, E6 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, B6, B2, B3, B1, F7, F6, F5, F4, D2, D3 }
+#define UNUSED_PINS
+
+#endif
diff --git a/keyboards/eco/rev2/rev2.c b/keyboards/eco/rev2/rev2.c
new file mode 100644
index 000000000..84097652d
--- /dev/null
+++ b/keyboards/eco/rev2/rev2.c
@@ -0,0 +1 @@
+#include "eco.h"
diff --git a/keyboards/eco/rev2/rev2.h b/keyboards/eco/rev2/rev2.h
new file mode 100644
index 000000000..5b377f290
--- /dev/null
+++ b/keyboards/eco/rev2/rev2.h
@@ -0,0 +1,24 @@
+#ifndef REV2_H
+#define REV2_H
+
+#include "../eco.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \
+	k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \
+	k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \
+	k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314  \
+	) \
+	{ \
+		{ k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \
+		{ k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \
+		{ k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \
+		{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 }  \
+	}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/eco/rev2/rules.mk b/keyboards/eco/rev2/rules.mk
new file mode 100644
index 000000000..a0825b4ef
--- /dev/null
+++ b/keyboards/eco/rev2/rules.mk
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk
index 5e808dfa7..2e2d48f6a 100644
--- a/keyboards/handwired/atreus50/rules.mk
+++ b/keyboards/handwired/atreus50/rules.mk
@@ -67,15 +67,3 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk
index 913bcb93e..a3fdd3d70 100644
--- a/keyboards/handwired/magicforce61/rules.mk
+++ b/keyboards/handwired/magicforce61/rules.mk
@@ -69,15 +69,3 @@ AUDIO_ENABLE ?= no           # Audio output on port C6
 ifndef QUANTUM_DIR
 	include ../../../Makefile
 endif
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk
index 0e07bde40..0d21623ce 100644
--- a/keyboards/handwired/magicforce68/rules.mk
+++ b/keyboards/handwired/magicforce68/rules.mk
@@ -69,15 +69,3 @@ AUDIO_ENABLE = no           # Audio output on port C6
 ifndef QUANTUM_DIR
 	include ../../../Makefile
 endif
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk
index 0e07bde40..0d21623ce 100644
--- a/keyboards/handwired/numpad20/rules.mk
+++ b/keyboards/handwired/numpad20/rules.mk
@@ -69,15 +69,3 @@ AUDIO_ENABLE = no           # Audio output on port C6
 ifndef QUANTUM_DIR
 	include ../../../Makefile
 endif
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk
index 0e07bde40..0d21623ce 100644
--- a/keyboards/handwired/ortho5x13/rules.mk
+++ b/keyboards/handwired/ortho5x13/rules.mk
@@ -69,15 +69,3 @@ AUDIO_ENABLE = no           # Audio output on port C6
 ifndef QUANTUM_DIR
 	include ../../../Makefile
 endif
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/lets_split/keymaps/fabian/Makefile b/keyboards/lets_split/keymaps/fabian/Makefile
new file mode 100644
index 000000000..b8c82cb99
--- /dev/null
+++ b/keyboards/lets_split/keymaps/fabian/Makefile
@@ -0,0 +1,9 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+# UNICODE_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/lets_split/keymaps/fabian/config.h b/keyboards/lets_split/keymaps/fabian/config.h
new file mode 100644
index 000000000..ba271d1ac
--- /dev/null
+++ b/keyboards/lets_split/keymaps/fabian/config.h
@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#define USE_SERIAL
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+
+#ifdef SUBPROJECT_rev1
+    #include "../../rev1/config.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "../../rev2/config.h"
+#endif
+#ifdef SUBPROJECT_rev2fliphalf
+	#include "../../rev2fliphalf/config.h"
+#endif
diff --git a/keyboards/lets_split/keymaps/fabian/keymap.c b/keyboards/lets_split/keymaps/fabian/keymap.c
new file mode 100644
index 000000000..0af505b47
--- /dev/null
+++ b/keyboards/lets_split/keymaps/fabian/keymap.c
@@ -0,0 +1,221 @@
+#include "lets_split.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Custom
+#define CTL_ESC CTL_T(KC_ESC)  // Tap for Escape, hold for Control
+#define SFT_ENT SFT_T(KC_ENT)  // Tap for Enter, hold for Shift
+#define SFT_BSP SFT_T(KC_BSPC) // Tap for Backspace, hold for Shift
+#define HPR_TAB ALL_T(KC_TAB)  // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift)
+// #define MEH_GRV MEH_T(KC_GRV)  // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space | Bksp |Raise | GUI  |AltGr | Ctrl |Adjust|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  HPR_TAB, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  SFT_BSP, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  SFT_BSP, RAISE,   KC_RGUI, KC_RALT, KC_RCTL, ADJUST \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space | Bksp |Raise | GUI  |AltGr | Ctrl |Adjust|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+  HPR_TAB, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+  CTL_ESC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  SFT_BSP, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  SFT_BSP, RAISE,   KC_RGUI, KC_RALT, KC_RCTL, ADJUST \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space | Bksp |Raise | GUI  |AltGr | Ctrl |Adjust|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+  HPR_TAB, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  CTL_ESC, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  SFT_BSP, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  SFT_BSP, RAISE,   KC_RGUI, KC_RALT, KC_RCTL, ADJUST \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | MS L | MS D |MS U  | MS R |MS Btn|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | Left | Down |  Up  | Rght |MS_BN2|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_BTN2, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      |Reset |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Reset | Del  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  KEYMAP( \
+  _______, RESET,   _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  RESET,   KC_DEL, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md
index 610b776ee..0ef7ff59d 100644
--- a/keyboards/lets_split/readme.md
+++ b/keyboards/lets_split/readme.md
@@ -106,7 +106,7 @@ Notes on Software Configuration
 -------------------------------
 
 Configuring the firmware is similar to any other QMK project. One thing
-to note is that `MATIX_ROWS` in `config.h` is the total number of rows between
+to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between
 the two halves, i.e. if your split keyboard has 4 rows in each half, then
 `MATRIX_ROWS=8`.
 
@@ -115,7 +115,7 @@ not be very difficult to adapt it to support more if required.
 
 Flashing
 -------
-From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+From the `lets_split` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
 Example: `make rev2-default-avrdude`
 
 
diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk
index cc87ee31c..c2b7d556e 100644
--- a/keyboards/lets_split/rules.mk
+++ b/keyboards/lets_split/rules.mk
@@ -74,15 +74,3 @@ USE_I2C = yes
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [ -z $$USB ]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/minidox/eeprom-lefthand.eep b/keyboards/minidox/eeprom-lefthand.eep
new file mode 100644
index 000000000..b9666a74c
--- /dev/null
+++ b/keyboards/minidox/eeprom-lefthand.eep
@@ -0,0 +1,2 @@
+:0B0000000000000000000000000001F4

+:00000001FF

diff --git a/keyboards/minidox/eeprom-righthand.eep b/keyboards/minidox/eeprom-righthand.eep
new file mode 100644
index 000000000..94cc5be7f
--- /dev/null
+++ b/keyboards/minidox/eeprom-righthand.eep
@@ -0,0 +1,2 @@
+:0B0000000000000000000000000000F5

+:00000001FF

diff --git a/keyboards/minidox/keymaps/that_canadian/config.h b/keyboards/minidox/keymaps/that_canadian/config.h
index aad7ed1e6..5832d1866 100644
--- a/keyboards/minidox/keymaps/that_canadian/config.h
+++ b/keyboards/minidox/keymaps/that_canadian/config.h
@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D7
 #define RGBLIGHT_TIMER
-#define RGBLED_NUM 4   // Number of LEDs
+#define RGBLED_NUM 8   // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
diff --git a/keyboards/minidox/keymaps/that_canadian/keymap.c b/keyboards/minidox/keymaps/that_canadian/keymap.c
index 5d55d1825..b1ca139b7 100644
--- a/keyboards/minidox/keymaps/that_canadian/keymap.c
+++ b/keyboards/minidox/keymaps/that_canadian/keymap.c
@@ -40,11 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |   Z  |   X  |   C  |   V  |   B  |           |   N  |   M  |   ,  |   .  |   /  |
  * `----------------------------------'           `----------------------------------'
  *                  ,--------------------.    ,------,-------------.
-<<<<<<< HEAD
  *                  | Shift| LOWER|      |    |      | RAISE| Ctrl |
-=======
- *                  | Ctrl | LOWER|      |    |      | RAISE| Shift|
->>>>>>> a4958a532da154b9dd6f6144836a73f9de641f74
  *                  `-------------| Space|    |BckSpc|------+------.
  *                                |      |    |      |
  *                                `------'    `------'
@@ -105,9 +101,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,----------------------------------.           ,----------------------------------.
  * |  F1  |  F2  |  F3  |  F4  |  F5  |           |   F6 |  F7  |  Up  |  F9  |  F10 |
  * |------+------+------+------+------|           |------+------+------+------+------|
- * |  F11 |  F12 |      |      |      |           |      | Left | Down |Right |caltde|
+ * |  F11 |  F12 |      |RGBSAI|RGBSAD|           |      | Left | Down |Right |caltde|
  * |------+------+------+------+------|           |------+------+------+------+------|
- * | Reset|      |      |      |      |           |      |      |   F8 |Taskmg|      |
+ * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD|           |RGBVAI|RGBVAD|  F8  |Taskmg|      |
  * `----------------------------------'           `----------------------------------'
  *                  ,--------------------.    ,------,-------------.
  *                  |      | LOWER|      |    |      | RAISE|      |
@@ -123,10 +119,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 )
 };
 
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-#endif
-
 void persistant_default_layer_set(uint16_t default_layer) {
   eeconfig_update_default_layer(default_layer);
   default_layer_set(default_layer);
@@ -136,9 +128,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
     case QWERTY:
       if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
         persistant_default_layer_set(1UL<<_QWERTY);
       }
       return false;
diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md
index da8971486..c15fd244a 100644
--- a/keyboards/minidox/readme.md
+++ b/keyboards/minidox/readme.md
@@ -1,7 +1,7 @@
 MiniDox
 =====
 
-![MimiDox](http://i.imgur.com/iWb3yO0.jpg)
+![MiniDox](http://i.imgur.com/iWb3yO0.jpg)
 
 A compact version of the ErgoDox
 
@@ -22,7 +22,7 @@ Flashing
 -------
 Note: Most of this is copied from the Let's Split readme, because it is awesome
 
-From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+From the `minidox` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
 Example: `make rev1-default-avrdude`
 
 Choosing which board to plug the USB cable into (choosing Master)
diff --git a/keyboards/nyquist/eeprom-lefthand.eep b/keyboards/nyquist/eeprom-lefthand.eep
new file mode 100644
index 000000000..b9666a74c
--- /dev/null
+++ b/keyboards/nyquist/eeprom-lefthand.eep
@@ -0,0 +1,2 @@
+:0B0000000000000000000000000001F4

+:00000001FF

diff --git a/keyboards/nyquist/eeprom-righthand.eep b/keyboards/nyquist/eeprom-righthand.eep
new file mode 100644
index 000000000..94cc5be7f
--- /dev/null
+++ b/keyboards/nyquist/eeprom-righthand.eep
@@ -0,0 +1,2 @@
+:0B0000000000000000000000000000F5

+:00000001FF

diff --git a/keyboards/nyquist/keymaps/default/Makefile b/keyboards/nyquist/keymaps/default/Makefile
index 457a3d01d..1e5761278 100644
--- a/keyboards/nyquist/keymaps/default/Makefile
+++ b/keyboards/nyquist/keymaps/default/Makefile
@@ -1,3 +1,5 @@
+RGBLIGHT_ENABLE = yes
+
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
diff --git a/keyboards/nyquist/keymaps/default/config.h b/keyboards/nyquist/keymaps/default/config.h
index 624d284ca..072d4a7ce 100644
--- a/keyboards/nyquist/keymaps/default/config.h
+++ b/keyboards/nyquist/keymaps/default/config.h
@@ -31,4 +31,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define _MASTER_RIGHT
 // #define EE_HANDS
 
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
 #endif
\ No newline at end of file
diff --git a/keyboards/nyquist/keymaps/default/keymap.c b/keyboards/nyquist/keymaps/default/keymap.c
index dcb68a6e0..97fee4e1e 100644
--- a/keyboards/nyquist/keymaps/default/keymap.c
+++ b/keyboards/nyquist/keymaps/default/keymap.c
@@ -139,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |      | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn|      |  Del |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
@@ -150,7 +150,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_ADJUST] =  KEYMAP( \
   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_DEL, \
   _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
diff --git a/keyboards/nyquist/matrix.c b/keyboards/nyquist/matrix.c
index dcb94c67c..21eef9456 100644
--- a/keyboards/nyquist/matrix.c
+++ b/keyboards/nyquist/matrix.c
@@ -21,9 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
+#include "wait.h"
 #include "print.h"
 #include "debug.h"
 #include "util.h"
@@ -31,6 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "split_util.h"
 #include "pro_micro.h"
 #include "config.h"
+#include "timer.h"
 
 #ifdef USE_I2C
 #  include "i2c.h"
@@ -38,14 +37,29 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #  include "serial.h"
 #endif
 
-#ifndef DEBOUNCE
-#  define DEBOUNCE	5
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
 #endif
 
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#else
+#    error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
 #define ERROR_DISCONNECT_COUNT 5
 
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
 static uint8_t error_count = 0;
 
 static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
@@ -55,11 +69,19 @@ static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
 static matrix_row_t matrix[MATRIX_ROWS];
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
 __attribute__ ((weak))
 void matrix_init_quantum(void) {
     matrix_init_kb();
@@ -118,33 +140,54 @@ void matrix_init(void)
     }
 
     matrix_init_quantum();
+
 }
 
 uint8_t _matrix_scan(void)
 {
-    // Right hand is stored after the left in the matirx so, we need to offset it
     int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+                PORTD ^= (1 << 2);
+            }
+
+#       else
+            read_cols_on_row(matrix+offset, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix+offset, current_col);
+#       endif
 
-    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i+offset] != cols) {
-            matrix_debouncing[i+offset] = cols;
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
     }
+#endif
 
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
             for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
                 matrix[i+offset] = matrix_debouncing[i+offset];
             }
+            debouncing = false;
         }
-    }
+#   endif
 
     return 1;
 }
@@ -200,9 +243,7 @@ int serial_transaction(void) {
 
 uint8_t matrix_scan(void)
 {
-    int ret = _matrix_scan();
-
-
+    uint8_t ret = _matrix_scan();
 
 #ifdef USE_I2C
     if( i2c_transaction() ) {
@@ -233,11 +274,10 @@ uint8_t matrix_scan(void)
 void matrix_slave_scan(void) {
     _matrix_scan();
 
-    int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
 
 #ifdef USE_I2C
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
         i2c_slave_buffer[i] = matrix[offset+i];
     }
 #else // USE_SERIAL
@@ -284,33 +324,141 @@ uint8_t matrix_key_count(void)
     return count;
 }
 
-static void  init_cols(void)
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
 {
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
-        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
     }
 }
 
-static matrix_row_t read_cols(void)
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
 {
-    matrix_row_t result = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
     }
-    return result;
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
 }
 
 static void unselect_rows(void)
 {
-    for(int x = 0; x < ROWS_PER_HAND; x++) {
-        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
-        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
     }
 }
 
-static void select_row(uint8_t row)
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
 {
-    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
-    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
 }
+
+#endif
diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md
index c70bf0257..61b9317d5 100644
--- a/keyboards/nyquist/readme.md
+++ b/keyboards/nyquist/readme.md
@@ -6,6 +6,8 @@ The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It ha
 
 ## Build Guide
 
+A build log of the Nyquist can be found here: [Nyquist Build Log](http://imgur.com/a/dD4sX).
+
 Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
 
 There is additional information there about flashing and adding RGB underglow.
@@ -98,7 +100,7 @@ unnecessary in simple use cases.
 
 Flashing
 -------
-From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+From the `nyquist` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
 Example: `make rev1-serial-avrdude`
 
 
diff --git a/keyboards/nyquist/rules.mk b/keyboards/nyquist/rules.mk
index dfcff1d90..3f40ff2f8 100644
--- a/keyboards/nyquist/rules.mk
+++ b/keyboards/nyquist/rules.mk
@@ -73,15 +73,3 @@ USE_I2C = yes
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/nyquist/split_util.c b/keyboards/nyquist/split_util.c
index 39639c3b4..346cbc908 100644
--- a/keyboards/nyquist/split_util.c
+++ b/keyboards/nyquist/split_util.c
@@ -8,6 +8,7 @@
 #include "matrix.h"
 #include "keyboard.h"
 #include "config.h"
+#include "timer.h"
 
 #ifdef USE_I2C
 #  include "i2c.h"
@@ -42,6 +43,7 @@ static void keyboard_master_setup(void) {
 }
 
 static void keyboard_slave_setup(void) {
+  timer_init();
 #ifdef USE_I2C
     i2c_slave_init(SLAVE_I2C_ADDRESS);
 #else
diff --git a/keyboards/orthodox/readme.md b/keyboards/orthodox/readme.md
index 57e940b0f..e1fbf94ba 100644
--- a/keyboards/orthodox/readme.md
+++ b/keyboards/orthodox/readme.md
@@ -96,7 +96,7 @@ the two halves, i.e. if your split keyboard has 3 rows in each half, then
 
 Flashing
 -------
-From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+From the `orthodox` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
 Example: `make rev2-default-avrdude`
 
 
diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk
index dfcff1d90..3f40ff2f8 100644
--- a/keyboards/orthodox/rules.mk
+++ b/keyboards/orthodox/rules.mk
@@ -73,15 +73,3 @@ USE_I2C = yes
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
-
-avrdude: build
-	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro now"; \
-	while [[ -z $$USB ]]; do \
-	  sleep 1; \
-	  ls /dev/tty* > /tmp/2; \
-	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
-	done; \
-	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-.PHONY: avrdude
diff --git a/keyboards/satan/keymaps/poker/keymap.c b/keyboards/satan/keymaps/poker/keymap.c
index 9da7d29b7..b7e6fac21 100644
--- a/keyboards/satan/keymaps/poker/keymap.c
+++ b/keyboards/satan/keymaps/poker/keymap.c
@@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * ,-----------------------------------------------------------.
    * | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|  DEL  |
    * |-----------------------------------------------------------|
-   * |     | Up|  |  |  |  |Cal|   |Ins|   |PrSc|Sclk|Paus|      |
+   * |     |   |Up|  |  |  |Cal|   |Ins|   |PrSc|Sclk|Paus|      |
    * |-----------------------------------------------------------|
    * |      |Left|Down|Rig|  |  |  |  |   |   |Home|PgUp|        |
    * |-----------------------------------------------------------|
@@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP,          KC_TRNS, \
   KC_TRNS, KC_TRNS, KC_APP,  KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU,  KC_MUTE, KC_END,  KC_PGDN,                   KC_TRNS, \
   KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-  
+
   /* Keymap _RL: Function Layer
    * ,-----------------------------------------------------------.
    * |   |   |   |   |   |   |   |   |   |   |   |   |   |  RESET|
@@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |        | F1|F2 | F3|F4 | F5| F6| F7| F8|   |   |          |
    * |-----------------------------------------------------------|
    * |    |    |    |                        |    |    |    |    |
-   * `-----------------------------------------------------------'   
+   * `-----------------------------------------------------------'
    */
 [_RL] = KEYMAP_ANSI(
   #ifdef RGBLIGHT_ENABLE
diff --git a/keyboards/uk78/Makefile b/keyboards/uk78/Makefile
new file mode 100644
index 000000000..57b2ef62e
--- /dev/null
+++ b/keyboards/uk78/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
diff --git a/keyboards/uk78/config.h b/keyboards/uk78/config.h
new file mode 100644
index 000000000..859fbf90f
--- /dev/null
+++ b/keyboards/uk78/config.h
@@ -0,0 +1,76 @@
+/*
+Copyright 2012 Jun Wako <ukkeyboards@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x554B /* Ascii */
+#define PRODUCT_ID      0x004E
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    UK Keyboards
+#define PRODUCT         UK78
+#define DESCRIPTION     QMK keyboard firmware for UK78
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 19
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F3, F2, F1, F0, A0 }
+#define MATRIX_COL_PINS { A2, A1, F5, F4, E6, E7, E5, E4, B7, D0, D1, D2, D3, D4, D5, D6, D7, B5, E0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* ws2812b options */
+#define RGB_DI_PIN F6
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
\ No newline at end of file
diff --git a/keyboards/uk78/keymaps/default/keymap.c b/keyboards/uk78/keymaps/default/keymap.c
new file mode 100644
index 000000000..b01beae18
--- /dev/null
+++ b/keyboards/uk78/keymaps/default/keymap.c
@@ -0,0 +1,119 @@
+#include "uk78.h"
+
+// Helpful defines
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL1 1
+#define _FL2 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* _BL: Base Layer(Default) - For ISO enter use ANSI \
+    * ,-------------------------------------------------------------------------------.
+    * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| /|BSpc| Del|  P/|  P*|  P-|
+    * |-------------------------------------------------------------------------------|
+    * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |  P7|  P8|  P9|  P=|
+    * |-------------------------------------------------------------------------------|
+    * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| #| Ent|  P4|  P5|  P6|  P+|
+    * |-------------------------------------------------------------------------------|
+    * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|  P1|  P2|  P3|SLck|
+    * |-------------------------------------------------------------------------------|
+    * |Ctrl|Win |Alt |        Space        |Alt|Mo(1)|Ctrl|Lef|Dow| Rig|  P0|  P.|PEnt|
+    * `-------------------------------------------------------------------------------'
+    */
+    [_BL] = KEYMAP(
+        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_DEL,  KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSLS, KC_P7,   KC_P8,   KC_P9,   KC_PEQL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,           KC_ENT,  KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,   KC_C,    KC_V,  KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  KC_RSFT, KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_SLCK,
+        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                             KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT),
+    /* _FL1: Function Layer 1 - For ISO enter use ANSI \
+    * ,-------------------------------------------------------------------------------.
+    * |  `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|PScr|Ins|NLck|    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |     |   |   |   |RST|   |   |   |   |   |   |   |   |     |    |    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |       |   |   |   |   |   |Hu+|Va+|Sa+|   |   |   |  |    |    |    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |     |   |   |   |   |RGB|Hu-|Va-|Sa-|Bl-|Bl+|   |Mute|Vol+|    |    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |    |    |    |      BL_Toggle       |   |   |   |    |Vol-|    |    |    |    |
+    * `-------------------------------------------------------------------------------'
+    */
+    [_FL1] = KEYMAP(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, BL_DEC,  BL_INC,  KC_TRNS, KC_MUTE, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            BL_TOGG,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+    /* _FL2: Function Layer 2 - For ISO enter use ANSI \
+    * ,-------------------------------------------------------------------------------.
+    * |   |  |   |   |   |   |   |   |   |   |   |   |   |    |   |    |    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |    |    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |     |   |   |   |   |   |   |   |   |   |   |   |    |    |    |    |    |    |
+    * |-------------------------------------------------------------------------------|
+    * |    |    |    |                      |   |   |   |    |    |    |    |    |    |
+    * `-------------------------------------------------------------------------------'
+    */
+    [_FL2] = KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+
+};
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRA |= (1 << 3); PORTA |= (1 << 3);
+	} else {
+		DDRA &= ~(1 << 3); PORTA &= ~(1 << 3);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+		
+	} else {
+		
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+		
+	} else {
+		
+	}
+
+}
\ No newline at end of file
diff --git a/keyboards/uk78/readme.md b/keyboards/uk78/readme.md
new file mode 100644
index 000000000..46f293614
--- /dev/null
+++ b/keyboards/uk78/readme.md
@@ -0,0 +1,16 @@
+# UK78
+
+![UK78](http://i.imgur.com/42pg6RS.png)
+
+A fully customizable 60%+numpad keyboard.
+
+* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)
+* Hardware Supported: UK78 PCB
+  * rev2 
+* Hardware Availability: [ukkeyboards.](http://ukkeyboards.bigcartel.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make uk78-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/uk78/rules.mk b/keyboards/uk78/rules.mk
new file mode 100644
index 000000000..4e8d14812
--- /dev/null
+++ b/keyboards/uk78/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=8192
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes
\ No newline at end of file
diff --git a/keyboards/uk78/uk78.c b/keyboards/uk78/uk78.c
new file mode 100644
index 000000000..3611427d0
--- /dev/null
+++ b/keyboards/uk78/uk78.c
@@ -0,0 +1 @@
+#include "uk78.h"
diff --git a/keyboards/uk78/uk78.h b/keyboards/uk78/uk78.h
new file mode 100644
index 000000000..6cc5eee47
--- /dev/null
+++ b/keyboards/uk78/uk78.h
@@ -0,0 +1,20 @@
+#ifndef UK78_H
+#define UK78_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, K116, K117, K118, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, K216, K217, K218, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413, K414, K415, K416, K417, K418  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115,  K116,  K117,  K118 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO, K214,  K215,  K216,  K217,  K218 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315,  K316,  K317,  K318 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  K414,  K415,  K416,  K417,  K418 }  \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/xd60/keymaps/BASE/keymap.c b/keyboards/xd60/keymaps/BASE/keymap.c
new file mode 100644
index 000000000..b3ccd5e58
--- /dev/null
+++ b/keyboards/xd60/keymaps/BASE/keymap.c
@@ -0,0 +1,46 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // 0: Base Layer
+  KEYMAP(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC  ,  KC_NO,    \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_NO,  KC_RSFT  ,KC_UP,    KC_DEL,      \
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, F(0),     KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  // 1: Function Layer
+  KEYMAP(
+      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_NO,   KC_NO,    \
+      KC_NO,   KC_WH_U, KC_UP,   KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,           KC_DEL,    \
+      KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_STEP,KC_NO,  KC_NO,  KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_RSFT,  KC_NO  ,KC_PGUP,  KC_INS,      \
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, F(0),     KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+// Custom Actions
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
+
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) { register_code(KC_RSFT); }
+      else { unregister_code(KC_RSFT); }
+      break;
+  }
+
+  return MACRO_NONE;
+};
+
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};
diff --git a/keyboards/xd60/keymaps/BASE/readme.md b/keyboards/xd60/keymaps/BASE/readme.md
new file mode 100644
index 000000000..89f9acaa9
--- /dev/null
+++ b/keyboards/xd60/keymaps/BASE/readme.md
@@ -0,0 +1,5 @@
+![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg)
+
+All of the keys which CAN have a function should be assigned one.
+
+The keys with KC_NO cannot be assigned a value
diff --git a/keyboards/xd60/keymaps/base/keymap.c b/keyboards/xd60/keymaps/base/keymap.c
new file mode 100644
index 000000000..b3ccd5e58
--- /dev/null
+++ b/keyboards/xd60/keymaps/base/keymap.c
@@ -0,0 +1,46 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // 0: Base Layer
+  KEYMAP(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC  ,  KC_NO,    \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_NO,  KC_RSFT  ,KC_UP,    KC_DEL,      \
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, F(0),     KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  // 1: Function Layer
+  KEYMAP(
+      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_NO,   KC_NO,    \
+      KC_NO,   KC_WH_U, KC_UP,   KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,           KC_DEL,    \
+      KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_STEP,KC_NO,  KC_NO,  KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_RSFT,  KC_NO  ,KC_PGUP,  KC_INS,      \
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, F(0),     KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+// Custom Actions
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
+
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) { register_code(KC_RSFT); }
+      else { unregister_code(KC_RSFT); }
+      break;
+  }
+
+  return MACRO_NONE;
+};
+
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};
diff --git a/keyboards/xd60/keymaps/base/readme.md b/keyboards/xd60/keymaps/base/readme.md
new file mode 100644
index 000000000..89f9acaa9
--- /dev/null
+++ b/keyboards/xd60/keymaps/base/readme.md
@@ -0,0 +1,5 @@
+![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg)
+
+All of the keys which CAN have a function should be assigned one.
+
+The keys with KC_NO cannot be assigned a value
diff --git a/keyboards/xd75/keymaps/fabian/Makefile b/keyboards/xd75/keymaps/fabian/Makefile
new file mode 100644
index 000000000..6e8941fdf
--- /dev/null
+++ b/keyboards/xd75/keymaps/fabian/Makefile
@@ -0,0 +1,37 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/xd75/keymaps/fabian/config.h b/keyboards/xd75/keymaps/fabian/config.h
new file mode 100644
index 000000000..f52a97bbc
--- /dev/null
+++ b/keyboards/xd75/keymaps/fabian/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/xd75/keymaps/fabian/keymap.c b/keyboards/xd75/keymaps/fabian/keymap.c
new file mode 100644
index 000000000..f6cc95ba2
--- /dev/null
+++ b/keyboards/xd75/keymaps/fabian/keymap.c
@@ -0,0 +1,237 @@
+#include "xd75.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Custom
+#define CTL_ESC CTL_T(KC_ESC)  // Tap for Escape, hold for Control
+#define SFT_ENT SFT_T(KC_ENT)  // Tap for Enter, hold for Shift
+#define SFT_BSP SFT_T(KC_BSPC) // Tap for Backspace, hold for Shift
+#define HPR_TAB ALL_T(KC_TAB)  // Tap for Tab, hold for Hyper (Super+Ctrl+Alt+Shift)
+// #define MEH_GRV MEH_T(KC_GRV)  // Tap for Backtick, hold for Meh (Ctrl+Alt+Shift)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,--------------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |      |      |      |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |      |      |      |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |      |      |      |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |      |      |      | Bksp |Raise | GUI  |AltGr | Ctrl |Adjust|
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  { HPR_TAB, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    _______, _______, _______, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC },
+  { CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    _______, _______, _______, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT },
+  { SFT_BSP, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    _______, _______, _______, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT },
+  { ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  _______, _______, _______, SFT_BSP, RAISE,   KC_RGUI, KC_RALT, KC_RCTL, ADJUST  },
+},
+
+/* Colemak
+ * ,--------------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |      |      |      |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |      |      |      |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |      |      |      |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |      |      |      | Bksp |Raise | GUI  |AltGr | Ctrl |Adjust|
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  { HPR_TAB, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    _______, _______, _______, KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC },
+  { CTL_ESC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    _______, _______, _______, KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT },
+  { SFT_BSP, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    _______, _______, _______, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_ENT },
+  { ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  _______, _______, _______, SFT_BSP, RAISE,   KC_RGUI, KC_RALT, KC_RCTL, ADJUST  },
+},
+
+/* Dvorak
+ * ,--------------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |      |      |      |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |      |      |      |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |      |      |      |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |      |      |      | Bksp |Raise | GUI  |AltGr | Ctrl |Adjust|
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },  
+  { HPR_TAB, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    _______, _______, _______, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC },
+  { CTL_ESC, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    _______, _______, _______, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH },
+  { SFT_BSP, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    _______, _______, _______, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_ENT },
+  { ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  _______, _______, _______, SFT_BSP, RAISE,   KC_RGUI, KC_RALT, KC_RCTL, ADJUST  },
+},
+
+/* Lower
+ * ,--------------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |      |      |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 | MS L | MS D |MS U  | MS R |MS Btn|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+  */
+[_LOWER] = {
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  { KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC },
+  { KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE },
+  { _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_BTN1 },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY },
+},
+
+/* Raise
+ * ,--------------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |      |      |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 | Left | Down |  Up  | Rght |MS_BN2|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  { KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC },
+  { KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS },
+  { _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_BTN2 },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY },
+},
+
+/* Adjust (Lower + Raise)
+ * ,--------------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |Reset |      |Aud on|Audoff|AGnorm|      |      |      |AGswap|Qwerty|Colemk|Dvorak|Reset | Del  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  {
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  { _______, RESET,   _______, AU_ON,   AU_OFF,  AG_NORM, _______, _______, _______, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  RESET,   KC_DEL  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
+},
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}