Added Daisy port (#2016)

* Add files via upload

* Update readme.md

* Update readme.md

* Update readme.md

* Add files via upload

* Delete config.h

* Delete rules.mk

* Add files via upload

* Update config.h

* revised config files

* revised readme

* Update readme.md

* Update readme.md

7 files changed, 408 insertions, 0 deletions

diff --git a/keyboards/daisy/config.h b/keyboards/daisy/config.h
new file mode 100644
index 000000000..d2ab92f87
--- /dev/null
+++ b/keyboards/daisy/config.h
@@ -0,0 +1,175 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1209
+#define PRODUCT_ID      0x2328
+#define DEVICE_VER      0x501
+#define MANUFACTURER    K.T.E.C.
+#define PRODUCT         Daisy
+#define DESCRIPTION     qmk port for Daisy
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D2, D3, D5, B7 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+ 
+#define BACKLIGHT_PIN D0
+#define BACKLIGHT_LEVELS 6
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+// ws2812 options
+#define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to
+#define RGBLIGHT_ANIMATIONS // run RGB animations
+#define RGBLED_NUM 8 // number of LEDs
+#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
+#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
diff --git a/keyboards/daisy/daisy.c b/keyboards/daisy/daisy.c
new file mode 100644
index 000000000..f8ca24ff0
--- /dev/null
+++ b/keyboards/daisy/daisy.c
@@ -0,0 +1,15 @@
+#include "daisy.h"
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRC  |=  (1<<PC6);
+        PORTC &= ~(1<<PC6);
+    } else {
+        // Hi-Z
+        DDRC  &= ~(1<<PC6);
+        PORTC &= ~(1<<PC6);
+  }
+	led_set_user(usb_led);
+}
\ No newline at end of file
diff --git a/keyboards/daisy/daisy.h b/keyboards/daisy/daisy.h
new file mode 100644
index 000000000..7e45bee2b
--- /dev/null
+++ b/keyboards/daisy/daisy.h
@@ -0,0 +1,19 @@
+#ifndef DAISY_H
+#define DAISY_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \
+	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \
+	K30, K31, K32, K34, K35, K37, K38, K39 \
+) \
+{ \
+	{ K00, K01, K02, K03,   K04, K05, K06,   K07, K08, K09, K0A }, \
+	{ K10, K11, K12, K13,   K14, K15, K16,   K17, K18, K19, K1A }, \
+	{ K20, K21, K22, K23,   K24, K25, K26,   K27, K28, K29, K2A }, \
+	{ K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A }  \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/daisy/keymaps/default/keymap.c b/keyboards/daisy/keymaps/default/keymap.c
new file mode 100644
index 000000000..ff08cf0a8
--- /dev/null
+++ b/keyboards/daisy/keymaps/default/keymap.c
@@ -0,0 +1,99 @@
+	#include "daisy.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+// Layer shorthand
+#define _BL 0
+#define _LW 1
+#define _RS 2
+
+enum layer_keycodes {
+	QWERTY = SAFE_RANGE, LOWER, RAISE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Base Layer
+ * .-----------------------------------------------------------------------.
+ * | ESC | Q   | W   | E   | R   | T   | Y   | U   | I   | O   | P   | \|  |
+ * |-----------------------------------------------------------------------|
+ * | TAB   | A   | S   | D   | F   | G   | H   | J   | K   | L   | ENTER   |
+ * |-----------------------------------------------------------------------|
+ * | LSHIFT | Z   | X    | C   | V   | B   | N   | M   | ,<  | .>  | /?    |
+ * |-----------------------------------------------------------------------|
+ * | LCTRL | LGUI | LALT | SPACE   | BACKSPACE      | LW     | RS  | RALT  |
+ * '-----------------------------------------------------------------------'
+ */
+
+	[_BL] = KEYMAP(
+  GRAVE_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,     KC_U,   KC_I,    KC_O,    KC_P,    KC_BSLS,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,     KC_J,   KC_K,    KC_L,    KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,     KC_M,   KC_COMM, KC_DOT,  KC_SLSH,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_BSPC, LOWER, RAISE, KC_RALT ),
+ 
+
+/* Function Layer
+ * .-----------------------------------------------------------------------.
+ * | GRV | 1   | 2   | 3   | 4   | 5   | 6   | 7   | 8   | 9   | 0   | -_  |
+ * |-----------------------------------------------------------------------|
+ * |       | =+  | UP  |     |     |     | [{  | ]}  | ;:  | '"  |         |
+ * |-----------------------------------------------------------------------|
+ * |        | LEFT| DOWN |RIGHT|     |     |     |     |     |     |       |
+ * |-----------------------------------------------------------------------|
+ * |       |      |      |         | DELETE         |        |     |       |
+ * '-----------------------------------------------------------------------'
+ */
+ 
+	[_LW] = KEYMAP(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+  KC_TRNS, KC_EQL,  KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_TRNS,
+  KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+  KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_DEL,  KC_TRNS, KC_TRNS, KC_TRNS ),
+ 
+ 
+ /* Second Function Layer
+ * .-----------------------------------------------------------------------.
+ * | RST | F1  | F2  | F3  | F4  | F5  | F6  |     | HOME| PGUP|     |     |
+ * |-----------------------------------------------------------------------|
+ * |      | F7  | F8  | F9  | F10 | F11 | F12 |     | END | PGDN|          |
+ * |-----------------------------------------------------------------------|
+ * |       |RGBtog|RGBmod|RGBhud|RGBhui|RGBvad|RGBvai|RGBsad|RGBsai|BL|    |
+ * |-----------------------------------------------------------------------|
+ * |       |      |      |         |                |        |     |       |
+ * '-----------------------------------------------------------------------'
+ */
+ 
+	[_RS] = KEYMAP(
+  RESET,   KC_F1,   KC_F2,    KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_TRNS, KC_HOME, KC_PGUP,  KC_TRNS,  KC_TRNS,
+  KC_TRNS, KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_END,  KC_PGDN,  KC_TRNS,
+  KC_TRNS, RGB_TOG, RGB_SMOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP,  KC_TRNS,
+  KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ),
+ 
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		case LOWER:
+		  if(record->event.pressed){
+			   layer_on(_LW);
+		  } else {
+			  layer_off(_LW);
+		  }
+		  return false;
+		  break;
+		  case RAISE:
+		  if(record->event.pressed){
+			   layer_on(_RS);
+		  } else {
+			  layer_off(_RS);
+		  }
+		  return false;
+		  break;
+	}
+  return true;
+};
\ No newline at end of file
diff --git a/keyboards/daisy/keymaps/default/readme.md b/keyboards/daisy/keymaps/default/readme.md
new file mode 100644
index 000000000..dff0dcbde
--- /dev/null
+++ b/keyboards/daisy/keymaps/default/readme.md
@@ -0,0 +1,5 @@
+![Daisy Layout Image](https://imgur.com/9mSF0yf)
+
+# Default Daisy Layout
+
+This is the default layout as offered by KPRepublic's TMK firmware for the Daisy with a few minor tweaks for usability made by me.
diff --git a/keyboards/daisy/readme.md b/keyboards/daisy/readme.md
new file mode 100644
index 000000000..427891d96
--- /dev/null
+++ b/keyboards/daisy/readme.md
@@ -0,0 +1,29 @@
+# Daisy
+
+A 40% keyboard kit sold by KPRepublic.
+
+Keyboard Maintainer: westfoxtrot (https://github.com/westfoxtrot)  
+Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2  
+Hardware Availability: http://tinyurl.com/yc26lq22
+
+Make example for this keyboard (after setting up your build environment):
+
+    make daisy:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+
+# Other Keymaps
+
+The "default" keymap included is the layout I personally use on the Daisy and the one I have found the most comfortable.
+
+A printable picture showing this layout is available here: https://imgur.com/9mSF0yf
+
+
+```
+$ make daisy:[default|<name>]
+```
+
+# Bootloader
+
+I personally had issues with the bootloader on my Daisy PCB and was unable to flash a firmware to the board after the first time. I replaced the bootloader with the one available in the repository at ../../util/bootloader_atmega32u4_1_0_0.hex
diff --git a/keyboards/daisy/rules.mk b/keyboards/daisy/rules.mk
new file mode 100644
index 000000000..f24df2fd6
--- /dev/null
+++ b/keyboards/daisy/rules.mk
@@ -0,0 +1,66 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4996
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
\ No newline at end of file