Massdrop keyboard support (#3780)

* Massdrop SAMD51

Massdrop SAMD51 keyboards initial project upload

* Removing relocated files

Removing files that were relocated and not deleted from previous location

* LED queue fix and cleaning

Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.

* Factory programmed serial usage

Ability to use factory programmed serial in hub and keyboard usb descriptors

* USB serial number and bugfix

Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.

* Project cleanup

Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.

* Fix for extra keys

Fixed possible USB hang on extra keys report set missing

* I2C cleanup

I2C cleanup and file renames necessary for master branch merge

* Boot tracing and clocks cleanup

Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.

* Relocate ARM/Atmel headers

Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.

* Pull request changes

Pull request changes

* Keymap and compile flag fix

Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.

* va_list include fix

Fix for va_list compile failure

* Include file case fixes

Fixes for include files with incorrect case

* ctrl and alt67 keyboard readme

Added ctrl and alt67 keyboard readme files

1 files changed, 528 insertions, 0 deletions

diff --git a/lib/arm_atsam/packs/atmel/SAMD51_DFP/1.0.70/include/component/qspi.h b/lib/arm_atsam/packs/atmel/SAMD51_DFP/1.0.70/include/component/qspi.h
new file mode 100644
index 000000000..208a955d6
--- /dev/null
+++ b/lib/arm_atsam/packs/atmel/SAMD51_DFP/1.0.70/include/component/qspi.h
@@ -0,0 +1,528 @@
+/**
+ * \file
+ *
+ * \brief Component description for QSPI
+ *
+ * Copyright (c) 2017 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ * 
+ * http://www.apache.org/licenses/LICENSE-2.0
+ * 
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAMD51_QSPI_COMPONENT_
+#define _SAMD51_QSPI_COMPONENT_
+
+/* ========================================================================== */
+/**  SOFTWARE API DEFINITION FOR QSPI */
+/* ========================================================================== */
+/** \addtogroup SAMD51_QSPI Quad SPI interface */
+/*@{*/
+
+#define QSPI_U2008
+#define REV_QSPI                    0x163
+
+/* -------- QSPI_CTRLA : (QSPI Offset: 0x00) (R/W 32) Control A -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t SWRST:1;          /*!< bit:      0  Software Reset                     */
+    uint32_t ENABLE:1;         /*!< bit:      1  Enable                             */
+    uint32_t :22;              /*!< bit:  2..23  Reserved                           */
+    uint32_t LASTXFER:1;       /*!< bit:     24  Last Transfer                      */
+    uint32_t :7;               /*!< bit: 25..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_CTRLA_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_CTRLA_OFFSET           0x00         /**< \brief (QSPI_CTRLA offset) Control A */
+#define QSPI_CTRLA_RESETVALUE       _U_(0x00000000) /**< \brief (QSPI_CTRLA reset_value) Control A */
+
+#define QSPI_CTRLA_SWRST_Pos        0            /**< \brief (QSPI_CTRLA) Software Reset */
+#define QSPI_CTRLA_SWRST            (_U_(0x1) << QSPI_CTRLA_SWRST_Pos)
+#define QSPI_CTRLA_ENABLE_Pos       1            /**< \brief (QSPI_CTRLA) Enable */
+#define QSPI_CTRLA_ENABLE           (_U_(0x1) << QSPI_CTRLA_ENABLE_Pos)
+#define QSPI_CTRLA_LASTXFER_Pos     24           /**< \brief (QSPI_CTRLA) Last Transfer */
+#define QSPI_CTRLA_LASTXFER         (_U_(0x1) << QSPI_CTRLA_LASTXFER_Pos)
+#define QSPI_CTRLA_MASK             _U_(0x01000003) /**< \brief (QSPI_CTRLA) MASK Register */
+
+/* -------- QSPI_CTRLB : (QSPI Offset: 0x04) (R/W 32) Control B -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t MODE:1;           /*!< bit:      0  Serial Memory Mode                 */
+    uint32_t LOOPEN:1;         /*!< bit:      1  Local Loopback Enable              */
+    uint32_t WDRBT:1;          /*!< bit:      2  Wait Data Read Before Transfer     */
+    uint32_t SMEMREG:1;        /*!< bit:      3  Serial Memory reg                  */
+    uint32_t CSMODE:2;         /*!< bit:  4.. 5  Chip Select Mode                   */
+    uint32_t :2;               /*!< bit:  6.. 7  Reserved                           */
+    uint32_t DATALEN:4;        /*!< bit:  8..11  Data Length                        */
+    uint32_t :4;               /*!< bit: 12..15  Reserved                           */
+    uint32_t DLYBCT:8;         /*!< bit: 16..23  Delay Between Consecutive Transfers */
+    uint32_t DLYCS:8;          /*!< bit: 24..31  Minimum Inactive CS Delay          */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_CTRLB_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_CTRLB_OFFSET           0x04         /**< \brief (QSPI_CTRLB offset) Control B */
+#define QSPI_CTRLB_RESETVALUE       _U_(0x00000000) /**< \brief (QSPI_CTRLB reset_value) Control B */
+
+#define QSPI_CTRLB_MODE_Pos         0            /**< \brief (QSPI_CTRLB) Serial Memory Mode */
+#define QSPI_CTRLB_MODE             (_U_(0x1) << QSPI_CTRLB_MODE_Pos)
+#define   QSPI_CTRLB_MODE_SPI_Val         _U_(0x0)   /**< \brief (QSPI_CTRLB) SPI operating mode */
+#define   QSPI_CTRLB_MODE_MEMORY_Val      _U_(0x1)   /**< \brief (QSPI_CTRLB) Serial Memory operating mode */
+#define QSPI_CTRLB_MODE_SPI         (QSPI_CTRLB_MODE_SPI_Val       << QSPI_CTRLB_MODE_Pos)
+#define QSPI_CTRLB_MODE_MEMORY      (QSPI_CTRLB_MODE_MEMORY_Val    << QSPI_CTRLB_MODE_Pos)
+#define QSPI_CTRLB_LOOPEN_Pos       1            /**< \brief (QSPI_CTRLB) Local Loopback Enable */
+#define QSPI_CTRLB_LOOPEN           (_U_(0x1) << QSPI_CTRLB_LOOPEN_Pos)
+#define QSPI_CTRLB_WDRBT_Pos        2            /**< \brief (QSPI_CTRLB) Wait Data Read Before Transfer */
+#define QSPI_CTRLB_WDRBT            (_U_(0x1) << QSPI_CTRLB_WDRBT_Pos)
+#define QSPI_CTRLB_SMEMREG_Pos      3            /**< \brief (QSPI_CTRLB) Serial Memory reg */
+#define QSPI_CTRLB_SMEMREG          (_U_(0x1) << QSPI_CTRLB_SMEMREG_Pos)
+#define QSPI_CTRLB_CSMODE_Pos       4            /**< \brief (QSPI_CTRLB) Chip Select Mode */
+#define QSPI_CTRLB_CSMODE_Msk       (_U_(0x3) << QSPI_CTRLB_CSMODE_Pos)
+#define QSPI_CTRLB_CSMODE(value)    (QSPI_CTRLB_CSMODE_Msk & ((value) << QSPI_CTRLB_CSMODE_Pos))
+#define   QSPI_CTRLB_CSMODE_NORELOAD_Val  _U_(0x0)   /**< \brief (QSPI_CTRLB) The chip select is deasserted if TD has not been reloaded before the end of the current transfer. */
+#define   QSPI_CTRLB_CSMODE_LASTXFER_Val  _U_(0x1)   /**< \brief (QSPI_CTRLB) The chip select is deasserted when the bit LASTXFER is written at 1 and the character written in TD has been transferred. */
+#define   QSPI_CTRLB_CSMODE_SYSTEMATICALLY_Val _U_(0x2)   /**< \brief (QSPI_CTRLB) The chip select is deasserted systematically after each transfer. */
+#define QSPI_CTRLB_CSMODE_NORELOAD  (QSPI_CTRLB_CSMODE_NORELOAD_Val << QSPI_CTRLB_CSMODE_Pos)
+#define QSPI_CTRLB_CSMODE_LASTXFER  (QSPI_CTRLB_CSMODE_LASTXFER_Val << QSPI_CTRLB_CSMODE_Pos)
+#define QSPI_CTRLB_CSMODE_SYSTEMATICALLY (QSPI_CTRLB_CSMODE_SYSTEMATICALLY_Val << QSPI_CTRLB_CSMODE_Pos)
+#define QSPI_CTRLB_DATALEN_Pos      8            /**< \brief (QSPI_CTRLB) Data Length */
+#define QSPI_CTRLB_DATALEN_Msk      (_U_(0xF) << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN(value)   (QSPI_CTRLB_DATALEN_Msk & ((value) << QSPI_CTRLB_DATALEN_Pos))
+#define   QSPI_CTRLB_DATALEN_8BITS_Val    _U_(0x0)   /**< \brief (QSPI_CTRLB) 8-bits transfer */
+#define   QSPI_CTRLB_DATALEN_9BITS_Val    _U_(0x1)   /**< \brief (QSPI_CTRLB) 9 bits transfer */
+#define   QSPI_CTRLB_DATALEN_10BITS_Val   _U_(0x2)   /**< \brief (QSPI_CTRLB) 10-bits transfer */
+#define   QSPI_CTRLB_DATALEN_11BITS_Val   _U_(0x3)   /**< \brief (QSPI_CTRLB) 11-bits transfer */
+#define   QSPI_CTRLB_DATALEN_12BITS_Val   _U_(0x4)   /**< \brief (QSPI_CTRLB) 12-bits transfer */
+#define   QSPI_CTRLB_DATALEN_13BITS_Val   _U_(0x5)   /**< \brief (QSPI_CTRLB) 13-bits transfer */
+#define   QSPI_CTRLB_DATALEN_14BITS_Val   _U_(0x6)   /**< \brief (QSPI_CTRLB) 14-bits transfer */
+#define   QSPI_CTRLB_DATALEN_15BITS_Val   _U_(0x7)   /**< \brief (QSPI_CTRLB) 15-bits transfer */
+#define   QSPI_CTRLB_DATALEN_16BITS_Val   _U_(0x8)   /**< \brief (QSPI_CTRLB) 16-bits transfer */
+#define QSPI_CTRLB_DATALEN_8BITS    (QSPI_CTRLB_DATALEN_8BITS_Val  << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_9BITS    (QSPI_CTRLB_DATALEN_9BITS_Val  << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_10BITS   (QSPI_CTRLB_DATALEN_10BITS_Val << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_11BITS   (QSPI_CTRLB_DATALEN_11BITS_Val << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_12BITS   (QSPI_CTRLB_DATALEN_12BITS_Val << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_13BITS   (QSPI_CTRLB_DATALEN_13BITS_Val << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_14BITS   (QSPI_CTRLB_DATALEN_14BITS_Val << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_15BITS   (QSPI_CTRLB_DATALEN_15BITS_Val << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DATALEN_16BITS   (QSPI_CTRLB_DATALEN_16BITS_Val << QSPI_CTRLB_DATALEN_Pos)
+#define QSPI_CTRLB_DLYBCT_Pos       16           /**< \brief (QSPI_CTRLB) Delay Between Consecutive Transfers */
+#define QSPI_CTRLB_DLYBCT_Msk       (_U_(0xFF) << QSPI_CTRLB_DLYBCT_Pos)
+#define QSPI_CTRLB_DLYBCT(value)    (QSPI_CTRLB_DLYBCT_Msk & ((value) << QSPI_CTRLB_DLYBCT_Pos))
+#define QSPI_CTRLB_DLYCS_Pos        24           /**< \brief (QSPI_CTRLB) Minimum Inactive CS Delay */
+#define QSPI_CTRLB_DLYCS_Msk        (_U_(0xFF) << QSPI_CTRLB_DLYCS_Pos)
+#define QSPI_CTRLB_DLYCS(value)     (QSPI_CTRLB_DLYCS_Msk & ((value) << QSPI_CTRLB_DLYCS_Pos))
+#define QSPI_CTRLB_MASK             _U_(0xFFFF0F3F) /**< \brief (QSPI_CTRLB) MASK Register */
+
+/* -------- QSPI_BAUD : (QSPI Offset: 0x08) (R/W 32) Baud Rate -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t CPOL:1;           /*!< bit:      0  Clock Polarity                     */
+    uint32_t CPHA:1;           /*!< bit:      1  Clock Phase                        */
+    uint32_t :6;               /*!< bit:  2.. 7  Reserved                           */
+    uint32_t BAUD:8;           /*!< bit:  8..15  Serial Clock Baud Rate             */
+    uint32_t DLYBS:8;          /*!< bit: 16..23  Delay Before SCK                   */
+    uint32_t :8;               /*!< bit: 24..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_BAUD_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_BAUD_OFFSET            0x08         /**< \brief (QSPI_BAUD offset) Baud Rate */
+#define QSPI_BAUD_RESETVALUE        _U_(0x00000000) /**< \brief (QSPI_BAUD reset_value) Baud Rate */
+
+#define QSPI_BAUD_CPOL_Pos          0            /**< \brief (QSPI_BAUD) Clock Polarity */
+#define QSPI_BAUD_CPOL              (_U_(0x1) << QSPI_BAUD_CPOL_Pos)
+#define QSPI_BAUD_CPHA_Pos          1            /**< \brief (QSPI_BAUD) Clock Phase */
+#define QSPI_BAUD_CPHA              (_U_(0x1) << QSPI_BAUD_CPHA_Pos)
+#define QSPI_BAUD_BAUD_Pos          8            /**< \brief (QSPI_BAUD) Serial Clock Baud Rate */
+#define QSPI_BAUD_BAUD_Msk          (_U_(0xFF) << QSPI_BAUD_BAUD_Pos)
+#define QSPI_BAUD_BAUD(value)       (QSPI_BAUD_BAUD_Msk & ((value) << QSPI_BAUD_BAUD_Pos))
+#define QSPI_BAUD_DLYBS_Pos         16           /**< \brief (QSPI_BAUD) Delay Before SCK */
+#define QSPI_BAUD_DLYBS_Msk         (_U_(0xFF) << QSPI_BAUD_DLYBS_Pos)
+#define QSPI_BAUD_DLYBS(value)      (QSPI_BAUD_DLYBS_Msk & ((value) << QSPI_BAUD_DLYBS_Pos))
+#define QSPI_BAUD_MASK              _U_(0x00FFFF03) /**< \brief (QSPI_BAUD) MASK Register */
+
+/* -------- QSPI_RXDATA : (QSPI Offset: 0x0C) (R/  32) Receive Data -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t DATA:16;          /*!< bit:  0..15  Receive Data                       */
+    uint32_t :16;              /*!< bit: 16..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_RXDATA_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_RXDATA_OFFSET          0x0C         /**< \brief (QSPI_RXDATA offset) Receive Data */
+#define QSPI_RXDATA_RESETVALUE      _U_(0x00000000) /**< \brief (QSPI_RXDATA reset_value) Receive Data */
+
+#define QSPI_RXDATA_DATA_Pos        0            /**< \brief (QSPI_RXDATA) Receive Data */
+#define QSPI_RXDATA_DATA_Msk        (_U_(0xFFFF) << QSPI_RXDATA_DATA_Pos)
+#define QSPI_RXDATA_DATA(value)     (QSPI_RXDATA_DATA_Msk & ((value) << QSPI_RXDATA_DATA_Pos))
+#define QSPI_RXDATA_MASK            _U_(0x0000FFFF) /**< \brief (QSPI_RXDATA) MASK Register */
+
+/* -------- QSPI_TXDATA : (QSPI Offset: 0x10) ( /W 32) Transmit Data -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t DATA:16;          /*!< bit:  0..15  Transmit Data                      */
+    uint32_t :16;              /*!< bit: 16..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_TXDATA_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_TXDATA_OFFSET          0x10         /**< \brief (QSPI_TXDATA offset) Transmit Data */
+#define QSPI_TXDATA_RESETVALUE      _U_(0x00000000) /**< \brief (QSPI_TXDATA reset_value) Transmit Data */
+
+#define QSPI_TXDATA_DATA_Pos        0            /**< \brief (QSPI_TXDATA) Transmit Data */
+#define QSPI_TXDATA_DATA_Msk        (_U_(0xFFFF) << QSPI_TXDATA_DATA_Pos)
+#define QSPI_TXDATA_DATA(value)     (QSPI_TXDATA_DATA_Msk & ((value) << QSPI_TXDATA_DATA_Pos))
+#define QSPI_TXDATA_MASK            _U_(0x0000FFFF) /**< \brief (QSPI_TXDATA) MASK Register */
+
+/* -------- QSPI_INTENCLR : (QSPI Offset: 0x14) (R/W 32) Interrupt Enable Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t RXC:1;            /*!< bit:      0  Receive Data Register Full Interrupt Disable */
+    uint32_t DRE:1;            /*!< bit:      1  Transmit Data Register Empty Interrupt Disable */
+    uint32_t TXC:1;            /*!< bit:      2  Transmission Complete Interrupt Disable */
+    uint32_t ERROR:1;          /*!< bit:      3  Overrun Error Interrupt Disable    */
+    uint32_t :4;               /*!< bit:  4.. 7  Reserved                           */
+    uint32_t CSRISE:1;         /*!< bit:      8  Chip Select Rise Interrupt Disable */
+    uint32_t :1;               /*!< bit:      9  Reserved                           */
+    uint32_t INSTREND:1;       /*!< bit:     10  Instruction End Interrupt Disable  */
+    uint32_t :21;              /*!< bit: 11..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_INTENCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_INTENCLR_OFFSET        0x14         /**< \brief (QSPI_INTENCLR offset) Interrupt Enable Clear */
+#define QSPI_INTENCLR_RESETVALUE    _U_(0x00000000) /**< \brief (QSPI_INTENCLR reset_value) Interrupt Enable Clear */
+
+#define QSPI_INTENCLR_RXC_Pos       0            /**< \brief (QSPI_INTENCLR) Receive Data Register Full Interrupt Disable */
+#define QSPI_INTENCLR_RXC           (_U_(0x1) << QSPI_INTENCLR_RXC_Pos)
+#define QSPI_INTENCLR_DRE_Pos       1            /**< \brief (QSPI_INTENCLR) Transmit Data Register Empty Interrupt Disable */
+#define QSPI_INTENCLR_DRE           (_U_(0x1) << QSPI_INTENCLR_DRE_Pos)
+#define QSPI_INTENCLR_TXC_Pos       2            /**< \brief (QSPI_INTENCLR) Transmission Complete Interrupt Disable */
+#define QSPI_INTENCLR_TXC           (_U_(0x1) << QSPI_INTENCLR_TXC_Pos)
+#define QSPI_INTENCLR_ERROR_Pos     3            /**< \brief (QSPI_INTENCLR) Overrun Error Interrupt Disable */
+#define QSPI_INTENCLR_ERROR         (_U_(0x1) << QSPI_INTENCLR_ERROR_Pos)
+#define QSPI_INTENCLR_CSRISE_Pos    8            /**< \brief (QSPI_INTENCLR) Chip Select Rise Interrupt Disable */
+#define QSPI_INTENCLR_CSRISE        (_U_(0x1) << QSPI_INTENCLR_CSRISE_Pos)
+#define QSPI_INTENCLR_INSTREND_Pos  10           /**< \brief (QSPI_INTENCLR) Instruction End Interrupt Disable */
+#define QSPI_INTENCLR_INSTREND      (_U_(0x1) << QSPI_INTENCLR_INSTREND_Pos)
+#define QSPI_INTENCLR_MASK          _U_(0x0000050F) /**< \brief (QSPI_INTENCLR) MASK Register */
+
+/* -------- QSPI_INTENSET : (QSPI Offset: 0x18) (R/W 32) Interrupt Enable Set -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t RXC:1;            /*!< bit:      0  Receive Data Register Full Interrupt Enable */
+    uint32_t DRE:1;            /*!< bit:      1  Transmit Data Register Empty Interrupt Enable */
+    uint32_t TXC:1;            /*!< bit:      2  Transmission Complete Interrupt Enable */
+    uint32_t ERROR:1;          /*!< bit:      3  Overrun Error Interrupt Enable     */
+    uint32_t :4;               /*!< bit:  4.. 7  Reserved                           */
+    uint32_t CSRISE:1;         /*!< bit:      8  Chip Select Rise Interrupt Enable  */
+    uint32_t :1;               /*!< bit:      9  Reserved                           */
+    uint32_t INSTREND:1;       /*!< bit:     10  Instruction End Interrupt Enable   */
+    uint32_t :21;              /*!< bit: 11..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_INTENSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_INTENSET_OFFSET        0x18         /**< \brief (QSPI_INTENSET offset) Interrupt Enable Set */
+#define QSPI_INTENSET_RESETVALUE    _U_(0x00000000) /**< \brief (QSPI_INTENSET reset_value) Interrupt Enable Set */
+
+#define QSPI_INTENSET_RXC_Pos       0            /**< \brief (QSPI_INTENSET) Receive Data Register Full Interrupt Enable */
+#define QSPI_INTENSET_RXC           (_U_(0x1) << QSPI_INTENSET_RXC_Pos)
+#define QSPI_INTENSET_DRE_Pos       1            /**< \brief (QSPI_INTENSET) Transmit Data Register Empty Interrupt Enable */
+#define QSPI_INTENSET_DRE           (_U_(0x1) << QSPI_INTENSET_DRE_Pos)
+#define QSPI_INTENSET_TXC_Pos       2            /**< \brief (QSPI_INTENSET) Transmission Complete Interrupt Enable */
+#define QSPI_INTENSET_TXC           (_U_(0x1) << QSPI_INTENSET_TXC_Pos)
+#define QSPI_INTENSET_ERROR_Pos     3            /**< \brief (QSPI_INTENSET) Overrun Error Interrupt Enable */
+#define QSPI_INTENSET_ERROR         (_U_(0x1) << QSPI_INTENSET_ERROR_Pos)
+#define QSPI_INTENSET_CSRISE_Pos    8            /**< \brief (QSPI_INTENSET) Chip Select Rise Interrupt Enable */
+#define QSPI_INTENSET_CSRISE        (_U_(0x1) << QSPI_INTENSET_CSRISE_Pos)
+#define QSPI_INTENSET_INSTREND_Pos  10           /**< \brief (QSPI_INTENSET) Instruction End Interrupt Enable */
+#define QSPI_INTENSET_INSTREND      (_U_(0x1) << QSPI_INTENSET_INSTREND_Pos)
+#define QSPI_INTENSET_MASK          _U_(0x0000050F) /**< \brief (QSPI_INTENSET) MASK Register */
+
+/* -------- QSPI_INTFLAG : (QSPI Offset: 0x1C) (R/W 32) Interrupt Flag Status and Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union { // __I to avoid read-modify-write on write-to-clear register
+  struct {
+    __I uint32_t RXC:1;            /*!< bit:      0  Receive Data Register Full         */
+    __I uint32_t DRE:1;            /*!< bit:      1  Transmit Data Register Empty       */
+    __I uint32_t TXC:1;            /*!< bit:      2  Transmission Complete              */
+    __I uint32_t ERROR:1;          /*!< bit:      3  Overrun Error                      */
+    __I uint32_t :4;               /*!< bit:  4.. 7  Reserved                           */
+    __I uint32_t CSRISE:1;         /*!< bit:      8  Chip Select Rise                   */
+    __I uint32_t :1;               /*!< bit:      9  Reserved                           */
+    __I uint32_t INSTREND:1;       /*!< bit:     10  Instruction End                    */
+    __I uint32_t :21;              /*!< bit: 11..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_INTFLAG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_INTFLAG_OFFSET         0x1C         /**< \brief (QSPI_INTFLAG offset) Interrupt Flag Status and Clear */
+#define QSPI_INTFLAG_RESETVALUE     _U_(0x00000000) /**< \brief (QSPI_INTFLAG reset_value) Interrupt Flag Status and Clear */
+
+#define QSPI_INTFLAG_RXC_Pos        0            /**< \brief (QSPI_INTFLAG) Receive Data Register Full */
+#define QSPI_INTFLAG_RXC            (_U_(0x1) << QSPI_INTFLAG_RXC_Pos)
+#define QSPI_INTFLAG_DRE_Pos        1            /**< \brief (QSPI_INTFLAG) Transmit Data Register Empty */
+#define QSPI_INTFLAG_DRE            (_U_(0x1) << QSPI_INTFLAG_DRE_Pos)
+#define QSPI_INTFLAG_TXC_Pos        2            /**< \brief (QSPI_INTFLAG) Transmission Complete */
+#define QSPI_INTFLAG_TXC            (_U_(0x1) << QSPI_INTFLAG_TXC_Pos)
+#define QSPI_INTFLAG_ERROR_Pos      3            /**< \brief (QSPI_INTFLAG) Overrun Error */
+#define QSPI_INTFLAG_ERROR          (_U_(0x1) << QSPI_INTFLAG_ERROR_Pos)
+#define QSPI_INTFLAG_CSRISE_Pos     8            /**< \brief (QSPI_INTFLAG) Chip Select Rise */
+#define QSPI_INTFLAG_CSRISE         (_U_(0x1) << QSPI_INTFLAG_CSRISE_Pos)
+#define QSPI_INTFLAG_INSTREND_Pos   10           /**< \brief (QSPI_INTFLAG) Instruction End */
+#define QSPI_INTFLAG_INSTREND       (_U_(0x1) << QSPI_INTFLAG_INSTREND_Pos)
+#define QSPI_INTFLAG_MASK           _U_(0x0000050F) /**< \brief (QSPI_INTFLAG) MASK Register */
+
+/* -------- QSPI_STATUS : (QSPI Offset: 0x20) (R/  32) Status Register -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t :1;               /*!< bit:      0  Reserved                           */
+    uint32_t ENABLE:1;         /*!< bit:      1  Enable                             */
+    uint32_t :7;               /*!< bit:  2.. 8  Reserved                           */
+    uint32_t CSSTATUS:1;       /*!< bit:      9  Chip Select                        */
+    uint32_t :22;              /*!< bit: 10..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_STATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_STATUS_OFFSET          0x20         /**< \brief (QSPI_STATUS offset) Status Register */
+#define QSPI_STATUS_RESETVALUE      _U_(0x00000200) /**< \brief (QSPI_STATUS reset_value) Status Register */
+
+#define QSPI_STATUS_ENABLE_Pos      1            /**< \brief (QSPI_STATUS) Enable */
+#define QSPI_STATUS_ENABLE          (_U_(0x1) << QSPI_STATUS_ENABLE_Pos)
+#define QSPI_STATUS_CSSTATUS_Pos    9            /**< \brief (QSPI_STATUS) Chip Select */
+#define QSPI_STATUS_CSSTATUS        (_U_(0x1) << QSPI_STATUS_CSSTATUS_Pos)
+#define QSPI_STATUS_MASK            _U_(0x00000202) /**< \brief (QSPI_STATUS) MASK Register */
+
+/* -------- QSPI_INSTRADDR : (QSPI Offset: 0x30) (R/W 32) Instruction Address -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t ADDR:32;          /*!< bit:  0..31  Instruction Address                */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_INSTRADDR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_INSTRADDR_OFFSET       0x30         /**< \brief (QSPI_INSTRADDR offset) Instruction Address */
+#define QSPI_INSTRADDR_RESETVALUE   _U_(0x00000000) /**< \brief (QSPI_INSTRADDR reset_value) Instruction Address */
+
+#define QSPI_INSTRADDR_ADDR_Pos     0            /**< \brief (QSPI_INSTRADDR) Instruction Address */
+#define QSPI_INSTRADDR_ADDR_Msk     (_U_(0xFFFFFFFF) << QSPI_INSTRADDR_ADDR_Pos)
+#define QSPI_INSTRADDR_ADDR(value)  (QSPI_INSTRADDR_ADDR_Msk & ((value) << QSPI_INSTRADDR_ADDR_Pos))
+#define QSPI_INSTRADDR_MASK         _U_(0xFFFFFFFF) /**< \brief (QSPI_INSTRADDR) MASK Register */
+
+/* -------- QSPI_INSTRCTRL : (QSPI Offset: 0x34) (R/W 32) Instruction Code -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t INSTR:8;          /*!< bit:  0.. 7  Instruction Code                   */
+    uint32_t :8;               /*!< bit:  8..15  Reserved                           */
+    uint32_t OPTCODE:8;        /*!< bit: 16..23  Option Code                        */
+    uint32_t :8;               /*!< bit: 24..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_INSTRCTRL_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_INSTRCTRL_OFFSET       0x34         /**< \brief (QSPI_INSTRCTRL offset) Instruction Code */
+#define QSPI_INSTRCTRL_RESETVALUE   _U_(0x00000000) /**< \brief (QSPI_INSTRCTRL reset_value) Instruction Code */
+
+#define QSPI_INSTRCTRL_INSTR_Pos    0            /**< \brief (QSPI_INSTRCTRL) Instruction Code */
+#define QSPI_INSTRCTRL_INSTR_Msk    (_U_(0xFF) << QSPI_INSTRCTRL_INSTR_Pos)
+#define QSPI_INSTRCTRL_INSTR(value) (QSPI_INSTRCTRL_INSTR_Msk & ((value) << QSPI_INSTRCTRL_INSTR_Pos))
+#define QSPI_INSTRCTRL_OPTCODE_Pos  16           /**< \brief (QSPI_INSTRCTRL) Option Code */
+#define QSPI_INSTRCTRL_OPTCODE_Msk  (_U_(0xFF) << QSPI_INSTRCTRL_OPTCODE_Pos)
+#define QSPI_INSTRCTRL_OPTCODE(value) (QSPI_INSTRCTRL_OPTCODE_Msk & ((value) << QSPI_INSTRCTRL_OPTCODE_Pos))
+#define QSPI_INSTRCTRL_MASK         _U_(0x00FF00FF) /**< \brief (QSPI_INSTRCTRL) MASK Register */
+
+/* -------- QSPI_INSTRFRAME : (QSPI Offset: 0x38) (R/W 32) Instruction Frame -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t WIDTH:3;          /*!< bit:  0.. 2  Instruction Code, Address, Option Code and Data Width */
+    uint32_t :1;               /*!< bit:      3  Reserved                           */
+    uint32_t INSTREN:1;        /*!< bit:      4  Instruction Enable                 */
+    uint32_t ADDREN:1;         /*!< bit:      5  Address Enable                     */
+    uint32_t OPTCODEEN:1;      /*!< bit:      6  Option Enable                      */
+    uint32_t DATAEN:1;         /*!< bit:      7  Data Enable                        */
+    uint32_t OPTCODELEN:2;     /*!< bit:  8.. 9  Option Code Length                 */
+    uint32_t ADDRLEN:1;        /*!< bit:     10  Address Length                     */
+    uint32_t :1;               /*!< bit:     11  Reserved                           */
+    uint32_t TFRTYPE:2;        /*!< bit: 12..13  Data Transfer Type                 */
+    uint32_t CRMODE:1;         /*!< bit:     14  Continuous Read Mode               */
+    uint32_t DDREN:1;          /*!< bit:     15  Double Data Rate Enable            */
+    uint32_t DUMMYLEN:5;       /*!< bit: 16..20  Dummy Cycles Length                */
+    uint32_t :11;              /*!< bit: 21..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_INSTRFRAME_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_INSTRFRAME_OFFSET      0x38         /**< \brief (QSPI_INSTRFRAME offset) Instruction Frame */
+#define QSPI_INSTRFRAME_RESETVALUE  _U_(0x00000000) /**< \brief (QSPI_INSTRFRAME reset_value) Instruction Frame */
+
+#define QSPI_INSTRFRAME_WIDTH_Pos   0            /**< \brief (QSPI_INSTRFRAME) Instruction Code, Address, Option Code and Data Width */
+#define QSPI_INSTRFRAME_WIDTH_Msk   (_U_(0x7) << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_WIDTH(value) (QSPI_INSTRFRAME_WIDTH_Msk & ((value) << QSPI_INSTRFRAME_WIDTH_Pos))
+#define   QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI_Val _U_(0x0)   /**< \brief (QSPI_INSTRFRAME) Instruction: Single-bit SPI / Address-Option: Single-bit SPI / Data: Single-bit SPI */
+#define   QSPI_INSTRFRAME_WIDTH_DUAL_OUTPUT_Val _U_(0x1)   /**< \brief (QSPI_INSTRFRAME) Instruction: Single-bit SPI / Address-Option: Single-bit SPI / Data: Dual SPI */
+#define   QSPI_INSTRFRAME_WIDTH_QUAD_OUTPUT_Val _U_(0x2)   /**< \brief (QSPI_INSTRFRAME) Instruction: Single-bit SPI / Address-Option: Single-bit SPI / Data: Quad SPI */
+#define   QSPI_INSTRFRAME_WIDTH_DUAL_IO_Val _U_(0x3)   /**< \brief (QSPI_INSTRFRAME) Instruction: Single-bit SPI / Address-Option: Dual SPI / Data: Dual SPI */
+#define   QSPI_INSTRFRAME_WIDTH_QUAD_IO_Val _U_(0x4)   /**< \brief (QSPI_INSTRFRAME) Instruction: Single-bit SPI / Address-Option: Quad SPI / Data: Quad SPI */
+#define   QSPI_INSTRFRAME_WIDTH_DUAL_CMD_Val _U_(0x5)   /**< \brief (QSPI_INSTRFRAME) Instruction: Dual SPI / Address-Option: Dual SPI / Data: Dual SPI */
+#define   QSPI_INSTRFRAME_WIDTH_QUAD_CMD_Val _U_(0x6)   /**< \brief (QSPI_INSTRFRAME) Instruction: Quad SPI / Address-Option: Quad SPI / Data: Quad SPI */
+#define QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI (QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI_Val << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_WIDTH_DUAL_OUTPUT (QSPI_INSTRFRAME_WIDTH_DUAL_OUTPUT_Val << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_WIDTH_QUAD_OUTPUT (QSPI_INSTRFRAME_WIDTH_QUAD_OUTPUT_Val << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_WIDTH_DUAL_IO (QSPI_INSTRFRAME_WIDTH_DUAL_IO_Val << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_WIDTH_QUAD_IO (QSPI_INSTRFRAME_WIDTH_QUAD_IO_Val << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_WIDTH_DUAL_CMD (QSPI_INSTRFRAME_WIDTH_DUAL_CMD_Val << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_WIDTH_QUAD_CMD (QSPI_INSTRFRAME_WIDTH_QUAD_CMD_Val << QSPI_INSTRFRAME_WIDTH_Pos)
+#define QSPI_INSTRFRAME_INSTREN_Pos 4            /**< \brief (QSPI_INSTRFRAME) Instruction Enable */
+#define QSPI_INSTRFRAME_INSTREN     (_U_(0x1) << QSPI_INSTRFRAME_INSTREN_Pos)
+#define QSPI_INSTRFRAME_ADDREN_Pos  5            /**< \brief (QSPI_INSTRFRAME) Address Enable */
+#define QSPI_INSTRFRAME_ADDREN      (_U_(0x1) << QSPI_INSTRFRAME_ADDREN_Pos)
+#define QSPI_INSTRFRAME_OPTCODEEN_Pos 6            /**< \brief (QSPI_INSTRFRAME) Option Enable */
+#define QSPI_INSTRFRAME_OPTCODEEN   (_U_(0x1) << QSPI_INSTRFRAME_OPTCODEEN_Pos)
+#define QSPI_INSTRFRAME_DATAEN_Pos  7            /**< \brief (QSPI_INSTRFRAME) Data Enable */
+#define QSPI_INSTRFRAME_DATAEN      (_U_(0x1) << QSPI_INSTRFRAME_DATAEN_Pos)
+#define QSPI_INSTRFRAME_OPTCODELEN_Pos 8            /**< \brief (QSPI_INSTRFRAME) Option Code Length */
+#define QSPI_INSTRFRAME_OPTCODELEN_Msk (_U_(0x3) << QSPI_INSTRFRAME_OPTCODELEN_Pos)
+#define QSPI_INSTRFRAME_OPTCODELEN(value) (QSPI_INSTRFRAME_OPTCODELEN_Msk & ((value) << QSPI_INSTRFRAME_OPTCODELEN_Pos))
+#define   QSPI_INSTRFRAME_OPTCODELEN_1BIT_Val _U_(0x0)   /**< \brief (QSPI_INSTRFRAME) 1-bit length option code */
+#define   QSPI_INSTRFRAME_OPTCODELEN_2BITS_Val _U_(0x1)   /**< \brief (QSPI_INSTRFRAME) 2-bits length option code */
+#define   QSPI_INSTRFRAME_OPTCODELEN_4BITS_Val _U_(0x2)   /**< \brief (QSPI_INSTRFRAME) 4-bits length option code */
+#define   QSPI_INSTRFRAME_OPTCODELEN_8BITS_Val _U_(0x3)   /**< \brief (QSPI_INSTRFRAME) 8-bits length option code */
+#define QSPI_INSTRFRAME_OPTCODELEN_1BIT (QSPI_INSTRFRAME_OPTCODELEN_1BIT_Val << QSPI_INSTRFRAME_OPTCODELEN_Pos)
+#define QSPI_INSTRFRAME_OPTCODELEN_2BITS (QSPI_INSTRFRAME_OPTCODELEN_2BITS_Val << QSPI_INSTRFRAME_OPTCODELEN_Pos)
+#define QSPI_INSTRFRAME_OPTCODELEN_4BITS (QSPI_INSTRFRAME_OPTCODELEN_4BITS_Val << QSPI_INSTRFRAME_OPTCODELEN_Pos)
+#define QSPI_INSTRFRAME_OPTCODELEN_8BITS (QSPI_INSTRFRAME_OPTCODELEN_8BITS_Val << QSPI_INSTRFRAME_OPTCODELEN_Pos)
+#define QSPI_INSTRFRAME_ADDRLEN_Pos 10           /**< \brief (QSPI_INSTRFRAME) Address Length */
+#define QSPI_INSTRFRAME_ADDRLEN     (_U_(0x1) << QSPI_INSTRFRAME_ADDRLEN_Pos)
+#define   QSPI_INSTRFRAME_ADDRLEN_24BITS_Val _U_(0x0)   /**< \brief (QSPI_INSTRFRAME) 24-bits address length */
+#define   QSPI_INSTRFRAME_ADDRLEN_32BITS_Val _U_(0x1)   /**< \brief (QSPI_INSTRFRAME) 32-bits address length */
+#define QSPI_INSTRFRAME_ADDRLEN_24BITS (QSPI_INSTRFRAME_ADDRLEN_24BITS_Val << QSPI_INSTRFRAME_ADDRLEN_Pos)
+#define QSPI_INSTRFRAME_ADDRLEN_32BITS (QSPI_INSTRFRAME_ADDRLEN_32BITS_Val << QSPI_INSTRFRAME_ADDRLEN_Pos)
+#define QSPI_INSTRFRAME_TFRTYPE_Pos 12           /**< \brief (QSPI_INSTRFRAME) Data Transfer Type */
+#define QSPI_INSTRFRAME_TFRTYPE_Msk (_U_(0x3) << QSPI_INSTRFRAME_TFRTYPE_Pos)
+#define QSPI_INSTRFRAME_TFRTYPE(value) (QSPI_INSTRFRAME_TFRTYPE_Msk & ((value) << QSPI_INSTRFRAME_TFRTYPE_Pos))
+#define   QSPI_INSTRFRAME_TFRTYPE_READ_Val _U_(0x0)   /**< \brief (QSPI_INSTRFRAME) Read transfer from the serial memory.Scrambling is not performed.Read at random location (fetch) in the serial flash memory is not possible. */
+#define   QSPI_INSTRFRAME_TFRTYPE_READMEMORY_Val _U_(0x1)   /**< \brief (QSPI_INSTRFRAME) Read data transfer from the serial memory.If enabled, scrambling is performed.Read at random location (fetch) in the serial flash memory is possible. */
+#define   QSPI_INSTRFRAME_TFRTYPE_WRITE_Val _U_(0x2)   /**< \brief (QSPI_INSTRFRAME) Write transfer into the serial memory.Scrambling is not performed. */
+#define   QSPI_INSTRFRAME_TFRTYPE_WRITEMEMORY_Val _U_(0x3)   /**< \brief (QSPI_INSTRFRAME) Write data transfer into the serial memory.If enabled, scrambling is performed. */
+#define QSPI_INSTRFRAME_TFRTYPE_READ (QSPI_INSTRFRAME_TFRTYPE_READ_Val << QSPI_INSTRFRAME_TFRTYPE_Pos)
+#define QSPI_INSTRFRAME_TFRTYPE_READMEMORY (QSPI_INSTRFRAME_TFRTYPE_READMEMORY_Val << QSPI_INSTRFRAME_TFRTYPE_Pos)
+#define QSPI_INSTRFRAME_TFRTYPE_WRITE (QSPI_INSTRFRAME_TFRTYPE_WRITE_Val << QSPI_INSTRFRAME_TFRTYPE_Pos)
+#define QSPI_INSTRFRAME_TFRTYPE_WRITEMEMORY (QSPI_INSTRFRAME_TFRTYPE_WRITEMEMORY_Val << QSPI_INSTRFRAME_TFRTYPE_Pos)
+#define QSPI_INSTRFRAME_CRMODE_Pos  14           /**< \brief (QSPI_INSTRFRAME) Continuous Read Mode */
+#define QSPI_INSTRFRAME_CRMODE      (_U_(0x1) << QSPI_INSTRFRAME_CRMODE_Pos)
+#define QSPI_INSTRFRAME_DDREN_Pos   15           /**< \brief (QSPI_INSTRFRAME) Double Data Rate Enable */
+#define QSPI_INSTRFRAME_DDREN       (_U_(0x1) << QSPI_INSTRFRAME_DDREN_Pos)
+#define QSPI_INSTRFRAME_DUMMYLEN_Pos 16           /**< \brief (QSPI_INSTRFRAME) Dummy Cycles Length */
+#define QSPI_INSTRFRAME_DUMMYLEN_Msk (_U_(0x1F) << QSPI_INSTRFRAME_DUMMYLEN_Pos)
+#define QSPI_INSTRFRAME_DUMMYLEN(value) (QSPI_INSTRFRAME_DUMMYLEN_Msk & ((value) << QSPI_INSTRFRAME_DUMMYLEN_Pos))
+#define QSPI_INSTRFRAME_MASK        _U_(0x001FF7F7) /**< \brief (QSPI_INSTRFRAME) MASK Register */
+
+/* -------- QSPI_SCRAMBCTRL : (QSPI Offset: 0x40) (R/W 32) Scrambling Mode -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t ENABLE:1;         /*!< bit:      0  Scrambling/Unscrambling Enable     */
+    uint32_t RANDOMDIS:1;      /*!< bit:      1  Scrambling/Unscrambling Random Value Disable */
+    uint32_t :30;              /*!< bit:  2..31  Reserved                           */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_SCRAMBCTRL_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_SCRAMBCTRL_OFFSET      0x40         /**< \brief (QSPI_SCRAMBCTRL offset) Scrambling Mode */
+#define QSPI_SCRAMBCTRL_RESETVALUE  _U_(0x00000000) /**< \brief (QSPI_SCRAMBCTRL reset_value) Scrambling Mode */
+
+#define QSPI_SCRAMBCTRL_ENABLE_Pos  0            /**< \brief (QSPI_SCRAMBCTRL) Scrambling/Unscrambling Enable */
+#define QSPI_SCRAMBCTRL_ENABLE      (_U_(0x1) << QSPI_SCRAMBCTRL_ENABLE_Pos)
+#define QSPI_SCRAMBCTRL_RANDOMDIS_Pos 1            /**< \brief (QSPI_SCRAMBCTRL) Scrambling/Unscrambling Random Value Disable */
+#define QSPI_SCRAMBCTRL_RANDOMDIS   (_U_(0x1) << QSPI_SCRAMBCTRL_RANDOMDIS_Pos)
+#define QSPI_SCRAMBCTRL_MASK        _U_(0x00000003) /**< \brief (QSPI_SCRAMBCTRL) MASK Register */
+
+/* -------- QSPI_SCRAMBKEY : (QSPI Offset: 0x44) ( /W 32) Scrambling Key -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+  struct {
+    uint32_t KEY:32;           /*!< bit:  0..31  Scrambling User Key                */
+  } bit;                       /*!< Structure used for bit  access                  */
+  uint32_t reg;                /*!< Type      used for register access              */
+} QSPI_SCRAMBKEY_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define QSPI_SCRAMBKEY_OFFSET       0x44         /**< \brief (QSPI_SCRAMBKEY offset) Scrambling Key */
+#define QSPI_SCRAMBKEY_RESETVALUE   _U_(0x00000000) /**< \brief (QSPI_SCRAMBKEY reset_value) Scrambling Key */
+
+#define QSPI_SCRAMBKEY_KEY_Pos      0            /**< \brief (QSPI_SCRAMBKEY) Scrambling User Key */
+#define QSPI_SCRAMBKEY_KEY_Msk      (_U_(0xFFFFFFFF) << QSPI_SCRAMBKEY_KEY_Pos)
+#define QSPI_SCRAMBKEY_KEY(value)   (QSPI_SCRAMBKEY_KEY_Msk & ((value) << QSPI_SCRAMBKEY_KEY_Pos))
+#define QSPI_SCRAMBKEY_MASK         _U_(0xFFFFFFFF) /**< \brief (QSPI_SCRAMBKEY) MASK Register */
+
+/** \brief QSPI APB hardware registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct {
+  __IO QSPI_CTRLA_Type           CTRLA;       /**< \brief Offset: 0x00 (R/W 32) Control A */
+  __IO QSPI_CTRLB_Type           CTRLB;       /**< \brief Offset: 0x04 (R/W 32) Control B */
+  __IO QSPI_BAUD_Type            BAUD;        /**< \brief Offset: 0x08 (R/W 32) Baud Rate */
+  __I  QSPI_RXDATA_Type          RXDATA;      /**< \brief Offset: 0x0C (R/  32) Receive Data */
+  __O  QSPI_TXDATA_Type          TXDATA;      /**< \brief Offset: 0x10 ( /W 32) Transmit Data */
+  __IO QSPI_INTENCLR_Type        INTENCLR;    /**< \brief Offset: 0x14 (R/W 32) Interrupt Enable Clear */
+  __IO QSPI_INTENSET_Type        INTENSET;    /**< \brief Offset: 0x18 (R/W 32) Interrupt Enable Set */
+  __IO QSPI_INTFLAG_Type         INTFLAG;     /**< \brief Offset: 0x1C (R/W 32) Interrupt Flag Status and Clear */
+  __I  QSPI_STATUS_Type          STATUS;      /**< \brief Offset: 0x20 (R/  32) Status Register */
+       RoReg8                    Reserved1[0xC];
+  __IO QSPI_INSTRADDR_Type       INSTRADDR;   /**< \brief Offset: 0x30 (R/W 32) Instruction Address */
+  __IO QSPI_INSTRCTRL_Type       INSTRCTRL;   /**< \brief Offset: 0x34 (R/W 32) Instruction Code */
+  __IO QSPI_INSTRFRAME_Type      INSTRFRAME;  /**< \brief Offset: 0x38 (R/W 32) Instruction Frame */
+       RoReg8                    Reserved2[0x4];
+  __IO QSPI_SCRAMBCTRL_Type      SCRAMBCTRL;  /**< \brief Offset: 0x40 (R/W 32) Scrambling Mode */
+  __O  QSPI_SCRAMBKEY_Type       SCRAMBKEY;   /**< \brief Offset: 0x44 ( /W 32) Scrambling Key */
+} Qspi;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/*@}*/
+
+#endif /* _SAMD51_QSPI_COMPONENT_ */