diff options
author | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 21:33:29 +0200 |
---|---|---|
committer | GitHub <noreply@github.com> | 2017-07-07 21:33:29 +0200 |
commit | 9de443cbf10ac41bc15762c9c83f138f51dd3b9a (patch) | |
tree | d8ddcb428e0b7d9773a1e52c42b60bdca2658beb /lib/lufa/Projects/Benito/Benito.txt | |
parent | 88b3d051b21cb1ddacc6353c5d59b19f03f3a242 (diff) | |
parent | 1c26468ad5a0701e244c99cbcbc547c93b75d515 (diff) | |
download | qmk_firmware-9de443cbf10ac41bc15762c9c83f138f51dd3b9a.tar.gz qmk_firmware-9de443cbf10ac41bc15762c9c83f138f51dd3b9a.tar.xz |
Merge pull request #1471 from qmk/lufa_lib
Update LUFA and move it to /lib/lufa
Diffstat (limited to 'lib/lufa/Projects/Benito/Benito.txt')
-rw-r--r-- | lib/lufa/Projects/Benito/Benito.txt | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/lib/lufa/Projects/Benito/Benito.txt b/lib/lufa/Projects/Benito/Benito.txt new file mode 100644 index 000000000..07bec52b3 --- /dev/null +++ b/lib/lufa/Projects/Benito/Benito.txt @@ -0,0 +1,106 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Benito Arduino Programmer Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Communications Device Class (CDC)</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Abstract Control Model (ACM)</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF CDC Class Standard \n + * Arduino Bootloader Specification</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This + * project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse + * to appear on a given port pin, to control the target's /RESET pin. + * + * This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs. + * + * After running this project for the first time on a new computer, you will need to supply the .INF file located + * in this project's directory as the device's driver when running under Windows. This will enable Windows to use + * its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should + * automatically use their own inbuilt CDC-ACM drivers. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <th><b>Define Name:</b></th> + * <th><b>Location:</b></th> + * <th><b>Description:</b></th> + * </tr> + * <tr> + * <td>AVR_RESET_LINE_PORT</td> + * <td>AppConfig.h</td> + * <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td> + * </tr> + * <tr> + * <td>AVR_RESET_LINE_DDR</td> + * <td>AppConfig.h</td> + * <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td> + * </tr> + * <tr> + * <td>AVR_RESET_LINE_MASK</td> + * <td>AppConfig.h</td> + * <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td> + * </tr> + * <tr> + * <td>AVR_RESET_PULSE_MS</td> + * <td>AppConfig.h</td> + * <td>Pulse length in milliseconds for the target /RESET pulse.</td> + * </tr> + * <tr> + * <td>TX_RX_LED_PULSE_MS</td> + * <td>AppConfig.h</td> + * <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td> + * </tr> + * <tr> + * <td>PING_PONG_LED_PULSE_MS</td> + * <td>AppConfig.h</td> + * <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td> + * </tr> + * <tr> + * <td>RECEIVE_BUFFER_FLUSH_MS</td> + * <td>AppConfig.h</td> + * <td>Period between flushings of received data buffer to the attached USB host.</td> + * </tr> + * </table> + */ + |