preonic

4 files changed, 162 insertions, 21 deletions

diff --git a/protocol/lufa/descriptor.c b/protocol/lufa/descriptor.c
index 6eedd5700..0536b7911 100644
--- a/protocol/lufa/descriptor.c
+++ b/protocol/lufa/descriptor.c
@@ -487,6 +487,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
         },
 #endif
 
+#ifdef MIDI_ENABLE
     .Audio_ControlInterface =
         {
             .Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
@@ -508,7 +509,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
             .Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
             .Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
 
-            .ACSpecification          = VERSION_BCD(1,1,1),
+            .ACSpecification          = VERSION_BCD(1,0,0),
             .TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
 
             .InCollection             = 1,
@@ -536,7 +537,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
             .Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
             .Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
 
-            .AudioSpecification       = VERSION_BCD(1,1,1),
+            .AudioSpecification       = VERSION_BCD(1,0,0),
 
             .TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
                                          offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
@@ -603,7 +604,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                     .EndpointAddress     = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM),
                     .Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                     .EndpointSize        = MIDI_STREAM_EPSIZE,
-                    .PollingIntervalMS   = 0x01
+                    .PollingIntervalMS   = 0x05
                 },
 
             .Refresh                  = 0,
@@ -628,7 +629,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                     .EndpointAddress     = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM),
                     .Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                     .EndpointSize        = MIDI_STREAM_EPSIZE,
-                    .PollingIntervalMS   = 0x01
+                    .PollingIntervalMS   = 0x05
                 },
 
             .Refresh                  = 0,
@@ -643,7 +644,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
             .TotalEmbeddedJacks       = 0x01,
             .AssociatedJackID         = {0x03}
         }
-
+#endif
 };
 
 
diff --git a/protocol/lufa/descriptor.h b/protocol/lufa/descriptor.h
index 58a7df440..44f4c8f4a 100644
--- a/protocol/lufa/descriptor.h
+++ b/protocol/lufa/descriptor.h
@@ -86,6 +86,7 @@ typedef struct
     USB_Descriptor_Endpoint_t             NKRO_INEndpoint;
 #endif
 
+#ifdef MIDI_ENABLE
       // MIDI Audio Control Interface
       USB_Descriptor_Interface_t                Audio_ControlInterface;
       USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
@@ -101,6 +102,7 @@ typedef struct
       USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_In_Jack_Endpoint_SPC;
       USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
       USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_Out_Jack_Endpoint_SPC;
+#endif
 
 } USB_Descriptor_Configuration_t;
 
@@ -132,9 +134,14 @@ typedef struct
 #   define NKRO_INTERFACE           CONSOLE_INTERFACE
 #endif
 
+#ifdef MIDI_ENABLE
+#   define MIDI_INTERFACE           (NKRO_INTERFACE + 1)
+#else
+#   define MIDI_INTERFACE           NKRO_INTERFACE
+#endif
 
 /* nubmer of interfaces */
-#define TOTAL_INTERFACES            (NKRO_INTERFACE + 3)
+#define TOTAL_INTERFACES            (MIDI_INTERFACE + 1)
 
 
 // Endopoint number and size
@@ -167,8 +174,13 @@ typedef struct
 #   endif
 #endif
 
-#define MIDI_STREAM_IN_EPNUM        (NKRO_IN_EPNUM + 1)
-#define MIDI_STREAM_OUT_EPNUM        (NKRO_IN_EPNUM + 1)
+#ifdef MIDI_ENABLE
+#   define MIDI_STREAM_IN_EPNUM        (NKRO_IN_EPNUM + 1)
+#   define MIDI_STREAM_OUT_EPNUM        (NKRO_IN_EPNUM + 1)
+#else
+#   define MIDI_STREAM_IN_EPNUM     NKRO_IN_EPNUM
+#   define MIDI_STREAM_OUT_EPNUM    NKRO_IN_EPNUM
+#endif
 
 
 #define KEYBOARD_EPSIZE             8
diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c
index d4c8eb169..0bb667a4e 100644
--- a/protocol/lufa/lufa.c
+++ b/protocol/lufa/lufa.c
@@ -66,27 +66,35 @@ static void send_keyboard(report_keyboard_t *report);
 static void send_mouse(report_mouse_t *report);
 static void send_system(uint16_t data);
 static void send_consumer(uint16_t data);
+
+#ifdef MIDI_ENABLE
 void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
 void usb_get_midi(MidiDevice * device);
 void midi_usb_init(MidiDevice * device);
+#endif
+
 host_driver_t lufa_driver = {
     keyboard_leds,
     send_keyboard,
     send_mouse,
     send_system,
     send_consumer,
+#ifdef MIDI_ENABLE
     usb_send_func,
     usb_get_midi,
-    midi_usb_init
+    midi_usb_init,
+#endif
+
 };
 
 void SetupHardware(void);
 
+
 USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
 {
   .Config =
   {
-    .StreamingInterfaceNumber = 1,
+    .StreamingInterfaceNumber = (NKRO_INTERFACE + 2),
     .DataINEndpoint           =
     {
       .Address          = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM),
@@ -112,6 +120,7 @@ USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
 #define SYS_COMMON_3 0x30
 
 
+
 /*******************************************************************************
  * Console
  ******************************************************************************/
@@ -279,8 +288,15 @@ void EVENT_USB_Device_ConfigurationChanged(void)
                                      NKRO_EPSIZE, ENDPOINT_BANK_SINGLE);
 #endif
 
+#ifdef MIDI_ENABLE
+    // ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&USB_MIDI_Interface);
+
+    ConfigSuccess &= ENDPOINT_CONFIG(MIDI_STREAM_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
+                                                MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= ENDPOINT_CONFIG(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
+                                                MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
+#endif
 
-    ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&USB_MIDI_Interface);
 }
 
 
@@ -589,32 +605,37 @@ int8_t sendchar(uint8_t c)
 
 
 
+#ifdef MIDI_ENABLE
 void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) {
   MIDI_EventPacket_t event;
   event.Data1 = byte0;
   event.Data2 = byte1;
   event.Data3 = byte2;
 
+  uint8_t cable = 0;
+
+Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM);
+
   //if the length is undefined we assume it is a SYSEX message
   if (midi_packet_length(byte0) == UNDEFINED) {
     switch(cnt) {
       case 3:
         if (byte2 == SYSEX_END)
-          event.Event = MIDI_EVENT(0, SYSEX_ENDS_IN_3);
+          event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_3);
         else
-          event.Event = MIDI_EVENT(0, SYSEX_START_OR_CONT);
+          event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
         break;
       case 2:
         if (byte1 == SYSEX_END)
-          event.Event = MIDI_EVENT(0, SYSEX_ENDS_IN_2);
+          event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_2);
         else
-          event.Event = MIDI_EVENT(0, SYSEX_START_OR_CONT);
+          event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
         break;
       case 1:
         if (byte0 == SYSEX_END)
-          event.Event = MIDI_EVENT(0, SYSEX_ENDS_IN_1);
+          event.Event = MIDI_EVENT(cable, SYSEX_ENDS_IN_1);
         else
-          event.Event = MIDI_EVENT(0, SYSEX_START_OR_CONT);
+          event.Event = MIDI_EVENT(cable, SYSEX_START_OR_CONT);
         break;
       default:
         return; //invalid cnt
@@ -624,18 +645,21 @@ void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byt
     //TODO are there any more?
     switch(byte0 & 0xF0){
       case MIDI_SONGPOSITION:
-        event.Event = MIDI_EVENT(0, SYS_COMMON_3);
+        event.Event = MIDI_EVENT(cable, SYS_COMMON_3);
         break;
       case MIDI_SONGSELECT:
       case MIDI_TC_QUARTERFRAME:
-        event.Event = MIDI_EVENT(0, SYS_COMMON_2);
+        event.Event = MIDI_EVENT(cable, SYS_COMMON_2);
         break;
       default:
-        event.Event = MIDI_EVENT(0, byte0);
+        event.Event = MIDI_EVENT(cable, byte0);
         break;
     }
   }
 
+Endpoint_Write_Stream_LE(&event, sizeof(event), NULL);
+Endpoint_ClearIN();
+
   MIDI_Device_SendEventPacket(&USB_MIDI_Interface, &event);
   MIDI_Device_Flush(&USB_MIDI_Interface);
   MIDI_Device_USBTask(&USB_MIDI_Interface);
@@ -680,7 +704,7 @@ void midi_usb_init(MidiDevice * device){
   SetupHardware();
   sei();
 }
-
+#endif
 
 
 
@@ -707,25 +731,30 @@ void SetupHardware(void)
     print_set_sendchar(sendchar);
 }
 
+#ifdef MIDI_ENABLE
 void fallthrough_callback(MidiDevice * device,
     uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
 void cc_callback(MidiDevice * device,
     uint8_t chan, uint8_t num, uint8_t val);
 void sysex_callback(MidiDevice * device,
     uint16_t start, uint8_t length, uint8_t * data);
+#endif
 
 int main(void)  __attribute__ ((weak));
 int main(void)
 {
     //setup the device
 
+#ifdef MIDI_ENABLE
     midi_device_init(&midi_device);
     midi_device_set_send_func(&midi_device, usb_send_func);
     midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
+#endif
 
     SetupHardware();
     sei();
 
+#ifdef MIDI_ENABLE
     midi_register_fallthrough_callback(&midi_device, fallthrough_callback);
     midi_register_cc_callback(&midi_device, cc_callback);
     midi_register_sysex_callback(&midi_device, sysex_callback);
@@ -734,6 +763,8 @@ int main(void)
     midi_send_cc(&midi_device, 15, 1, 0);
     midi_send_noteon(&midi_device, 0, 64, 127);
     midi_send_noteoff(&midi_device, 0, 64, 127);
+#endif
+
 
     /* wait for USB startup & debug output */
     while (USB_DeviceState != DEVICE_STATE_Configured) {
@@ -764,7 +795,9 @@ int main(void)
 
         keyboard_task();
 
+#ifdef MIDI_ENABLE
         midi_device_process(&midi_device);
+#endif
 
 #if !defined(INTERRUPT_CONTROL_ENDPOINT)
         USB_USBTask();
@@ -772,6 +805,7 @@ int main(void)
     }
 }
 
+#ifdef MIDI_ENABLE
 //echo data back
 void fallthrough_callback(MidiDevice * device,
     uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2){
@@ -790,3 +824,4 @@ void sysex_callback(MidiDevice * device,
   for (int i = 0; i < length; i++)
     midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i));
 }
+#endif
diff --git a/protocol/lufa/midi/Config/LUFAConfig.h b/protocol/lufa/midi/Config/LUFAConfig.h
new file mode 100755
index 000000000..fa9404498
--- /dev/null
+++ b/protocol/lufa/midi/Config/LUFAConfig.h
@@ -0,0 +1,93 @@
+/*

+             LUFA Library

+     Copyright (C) Dean Camera, 2012.

+

+  dean [at] fourwalledcubicle [dot] com

+           www.lufa-lib.org

+*/

+

+/*

+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

+

+  Permission to use, copy, modify, distribute, and sell this

+  software and its documentation for any purpose is hereby granted

+  without fee, provided that the above copyright notice appear in

+  all copies and that both that the copyright notice and this

+  permission notice and warranty disclaimer appear in supporting

+  documentation, and that the name of the author not be used in

+  advertising or publicity pertaining to distribution of the

+  software without specific, written prior permission.

+

+  The author disclaim all warranties with regard to this

+  software, including all implied warranties of merchantability

+  and fitness.  In no event shall the author be liable for any

+  special, indirect or consequential damages or any damages

+  whatsoever resulting from loss of use, data or profits, whether

+  in an action of contract, negligence or other tortious action,

+  arising out of or in connection with the use or performance of

+  this software.

+*/

+

+/** \file

+ *  \brief LUFA Library Configuration Header File

+ *

+ *  This header file is used to configure LUFA's compile time options,

+ *  as an alternative to the compile time constants supplied through

+ *  a makefile.

+ *

+ *  For information on what each token does, refer to the LUFA

+ *  manual section "Summary of Compile Tokens".

+ */

+

+#ifndef _LUFA_CONFIG_H_

+#define _LUFA_CONFIG_H_

+

+	#if (ARCH == ARCH_AVR8)

+

+		/* Non-USB Related Configuration Tokens: */

+//		#define DISABLE_TERMINAL_CODES

+

+		/* USB Class Driver Related Tokens: */

+//		#define HID_HOST_BOOT_PROTOCOL_ONLY

+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}

+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}

+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}

+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}

+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}

+//		#define NO_CLASS_DRIVER_AUTOFLUSH

+

+		/* General USB Driver Related Tokens: */

+//		#define ORDERED_EP_CONFIG

+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)

+		#define USB_DEVICE_ONLY

+//		#define USB_HOST_ONLY

+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}

+//		#define NO_LIMITED_CONTROLLER_CONNECT

+//		#define NO_SOF_EVENTS

+

+		/* USB Device Mode Driver Related Tokens: */

+//		#define USE_RAM_DESCRIPTORS

+		#define USE_FLASH_DESCRIPTORS

+//		#define USE_EEPROM_DESCRIPTORS

+//		#define NO_INTERNAL_SERIAL

+		#define FIXED_CONTROL_ENDPOINT_SIZE      8

+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}

+		#define FIXED_NUM_CONFIGURATIONS         1

+//		#define CONTROL_ONLY_DEVICE

+//		#define INTERRUPT_CONTROL_ENDPOINT

+//		#define NO_DEVICE_REMOTE_WAKEUP

+//		#define NO_DEVICE_SELF_POWER

+

+		/* USB Host Mode Driver Related Tokens: */

+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}

+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}

+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}

+//      #define NO_AUTO_VBUS_MANAGEMENT

+//      #define INVERTED_VBUS_ENABLE_LINE

+

+	#else

+

+		#error Unsupported architecture for this LUFA configuration file.

+

+	#endif

+#endif