RGB Matrix refactoring to open up for new drivers (#3913)

* rgb_matrix: use a driver ops struct

This is intended to avoid #ifdef proliferation on adding more drivers,
eg. model01, which use different architectures.

* rgb_matrix: document driver struct members

* rgb_matrix: remove unused LED testing code

* rgb_matrix: don't build into IS31x drivers unless being used

* rgb_matrix: refactor make config options

This ensures that the necessary files are included for any custom
RGB_MATRIX_ENABLE value, without having to add entries here for specific
boards. This particularly affects model01 because its controller is
integrated and won't be used anywhere else, so it's preferable not to
put it in common_features.mk.

This now validates the value of RGB_MATRIX_ENABLE.

It was necessary to fix an error in ergodox_ez rules.mk using the wrong
comment separator, yielding an invalid value.

* IS31x drivers: don't write the control registers all the time

This is only needed when they are changed. This is done in init() and
board- or keymap-specific code is free to make further changes.

* rgb_matrix: move structs from chip drivers to rgb_matrix_drivers.c

This approach is specific to the rgb_matrix functionality, so keep it
neatly separated from the raw chip drivers.

1 files changed, 4 insertions, 109 deletions

diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c
index 5fb59af8c..807e4d62d 100644
--- a/quantum/rgb_matrix.c
+++ b/quantum/rgb_matrix.c
@@ -18,7 +18,6 @@
 
 
 #include "rgb_matrix.h"
-#include "i2c_master.h"
 #include "progmem.h"
 #include "config.h"
 #include "eeprom.h"
@@ -111,29 +110,15 @@ void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i, uint8_t
 }
 
 void rgb_matrix_update_pwm_buffers(void) {
-#ifdef IS31FL3731
-    IS31FL3731_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-    IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#elif defined(IS31FL3733)
-    IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-    IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#endif
+    rgb_matrix_driver.flush();
 }
 
 void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) {
-#ifdef IS31FL3731
-    IS31FL3731_set_color( index, red, green, blue );
-#elif defined(IS31FL3733)
-    IS31FL3733_set_color( index, red, green, blue );
-#endif
+    rgb_matrix_driver.set_color(index, red, green, blue);
 }
 
 void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) {
-#ifdef IS31FL3731
-    IS31FL3731_set_color_all( red, green, blue );
-#elif defined(IS31FL3733)
-    IS31FL3733_set_color_all( red, green, blue );
-#endif
+    rgb_matrix_driver.set_color_all(red, green, blue);
 }
 
 bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) {
@@ -196,47 +181,6 @@ void rgb_matrix_test(void) {
     }
 }
 
-// This tests the LEDs
-// Note that it will change the LED control registers
-// in the LED drivers, and leave them in an invalid
-// state for other backlight effects.
-// ONLY USE THIS FOR TESTING LEDS!
-void rgb_matrix_single_LED_test(void) {
-    static uint8_t color = 0; // 0,1,2 for R,G,B
-    static uint8_t row = 0;
-    static uint8_t column = 0;
-
-    static uint8_t tick = 0;
-    tick++;
-
-    if ( tick > 2 )
-    {
-        tick = 0;
-        column++;
-    }
-    if ( column > MATRIX_COLS )
-    {
-        column = 0;
-        row++;
-    }
-    if ( row > MATRIX_ROWS )
-    {
-        row = 0;
-        color++;
-    }
-    if ( color > 2 )
-    {
-        color = 0;
-    }
-
-    uint8_t led[8], led_count;
-    map_row_column_to_led(row,column,led,&led_count);
-    for(uint8_t i = 0; i < led_count; i++) {
-        rgb_matrix_set_color_all( 40, 40, 40 );
-        rgb_matrix_test_led( led[i], color==0, color==1, color==2 );
-    }
-}
-
 // All LEDs off
 void rgb_matrix_all_off(void) {
     rgb_matrix_set_color_all( 0, 0, 0 );
@@ -817,7 +761,7 @@ void rgb_matrix_indicators_user(void) {}
 // }
 
 void rgb_matrix_init(void) {
-  rgb_matrix_setup_drivers();
+  rgb_matrix_driver.init();
 
   // TODO: put the 1 second startup delay here?
 
@@ -841,33 +785,6 @@ void rgb_matrix_init(void) {
   eeconfig_debug_rgb_matrix(); // display current eeprom values
 }
 
-void rgb_matrix_setup_drivers(void) {
-  // Initialize TWI
-  i2c_init();
-#ifdef IS31FL3731
-  IS31FL3731_init( DRIVER_ADDR_1 );
-  IS31FL3731_init( DRIVER_ADDR_2 );
-#elif defined (IS31FL3733)
-  IS31FL3733_init( DRIVER_ADDR_1 );
-#endif
-
-  for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) {
-    bool enabled = true;
-    // This only caches it for later
-#ifdef IS31FL3731
-    IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
-#elif defined (IS31FL3733)
-    IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
-#endif
-  }
-  // This actually updates the LED drivers
-#ifdef IS31FL3731
-  IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#elif defined (IS31FL3733)
-  IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#endif
-}
-
 // Deals with the messy details of incrementing an integer
 uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) {
     int16_t new_value = value;
@@ -910,28 +827,6 @@ uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) {
 //     }
 // }
 
-void rgb_matrix_test_led( uint8_t index, bool red, bool green, bool blue ) {
-    for ( int i=0; i<DRIVER_LED_TOTAL; i++ )
-    {
-        if ( i == index )
-        {
-#ifdef IS31FL3731
-            IS31FL3731_set_led_control_register( i, red, green, blue );
-#elif defined (IS31FL3733)
-            IS31FL3733_set_led_control_register( i, red, green, blue );
-#endif
-        }
-        else
-        {
-#ifdef IS31FL3731
-            IS31FL3731_set_led_control_register( i, false, false, false );
-#elif defined (IS31FL3733)
-            IS31FL3733_set_led_control_register( i, false, false, false );
-#endif
-        }
-    }
-}
-
 uint32_t rgb_matrix_get_tick(void) {
     return g_tick;
 }