diff options
author | Jack Humbert <jack.humb@gmail.com> | 2017-07-07 21:33:29 +0200 |
---|---|---|
committer | GitHub <noreply@github.com> | 2017-07-07 21:33:29 +0200 |
commit | 9de443cbf10ac41bc15762c9c83f138f51dd3b9a (patch) | |
tree | d8ddcb428e0b7d9773a1e52c42b60bdca2658beb /tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.txt | |
parent | 88b3d051b21cb1ddacc6353c5d59b19f03f3a242 (diff) | |
parent | 1c26468ad5a0701e244c99cbcbc547c93b75d515 (diff) | |
download | qmk_firmware-9de443cbf10ac41bc15762c9c83f138f51dd3b9a.tar.gz qmk_firmware-9de443cbf10ac41bc15762c9c83f138f51dd3b9a.tar.xz |
Merge pull request #1471 from qmk/lufa_lib
Update LUFA and move it to /lib/lufa
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.txt')
-rw-r--r-- | tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.txt | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.txt b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.txt deleted file mode 100644 index e09484793..000000000 --- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderMassStorage.txt +++ /dev/null @@ -1,225 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Mass Storage Class USB AVR Bootloader - * - * \section Sec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * \li Series 6 USB AVRs (AT90USBxxx6) - * \li Series 4 USB AVRs (ATMEGAxxU4) - <i>See \ref SSec_Aux_Space</i> - * \li ATMEGA32U2 - <i>See \ref SSec_Aux_Space</i> - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * <table> - * <tr> - * <td><b>USB Mode:</b></td> - * <td>Device</td> - * </tr> - * <tr> - * <td><b>USB Class:</b></td> - * <td>Mass Storage Device</td> - * </tr> - * <tr> - * <td><b>USB Subclass:</b></td> - * <td>Bulk-Only Transport</td> - * </tr> - * <tr> - * <td><b>Relevant Standards:</b></td> - * <td>USBIF Mass Storage Standard \n - * USB Bulk-Only Transport Standard \n - * SCSI Primary Commands Specification \n - * SCSI Block Commands Specification</td> - * </tr> - * <tr> - * <td><b>Supported USB Speeds:</b></td> - * <td>Full Speed Mode</td> - * </tr> - * </table> - * - * \section Sec_Description Project Description: - * - * This bootloader enumerates to the host as a Mass Storage device, capable of reading and writing a new binary - * firmware image file, to load firmware onto the AVR. - * - * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit - * into 6KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to - * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. - * - * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the - * bootloader from the normal user application. - * - * \warning <b>THIS BOOTLOADER IS NOT SECURE.</b> Malicious entities can recover written data, even if the device - * lockbits are set. - * - * \section Sec_Running Running the Bootloader - * - * This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device - * datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST - * fuse is cleared. - * - * For board specific exceptions to the above, see below. - * - * \subsection SSec_XPLAIN Atmel Xplain Board - * Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the - * \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. - * - * \subsection SSec_Leonardo Arduino Leonardo Board - * Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the - * \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. - * - * \section Sec_Installation Driver Installation - * - * This bootloader uses the Mass Storage drivers inbuilt into all modern operating systems, thus no additional - * drivers need to be supplied for correct operation. - * - * \section Sec_HostApp Host Controller Application - * - * This bootloader is compatible with all operating systems that support the FAT12 file system format. To reprogram the - * device, overwrite a file stored on the virtual FAT filesystem with a new binary (BIN format) image. Remember to safely - * remove your device from the host using the host OS's ejection APIs, to ensure all data is correctly flushed to the - * bootloader's virtual filesystem and not cached in the OS's file system driver. - * - * The current device firmware can be read from the device by reading a file from the virtual FAT filesystem. - * - * \warning This bootloader is currently <b>incompatible with the Apple MacOS X OS Finder GUI</b>, due to the - * large amount of meta files this OS attempts to write to the disk along with the new binaries. On - * this platform, firmwares must be copied to the disk via the Terminal application only to prevent - * firmware corruption. - * - * \section Sec_API User Application API - * - * Several user application functions for FLASH and other special memory area manipulations are exposed by the bootloader, - * allowing the user application to call into the bootloader at runtime to read and write FLASH data. - * - * By default, the bootloader API jump table is located 32 bytes from the end of the device's FLASH memory, and follows the - * following layout: - * - * \code - * #define BOOTLOADER_API_TABLE_SIZE 32 - * #define BOOTLOADER_API_TABLE_START ((FLASHEND + 1UL) - BOOTLOADER_API_TABLE_SIZE) - * #define BOOTLOADER_API_CALL(Index) (void*)((BOOTLOADER_API_TABLE_START + (Index * 2)) / 2) - * - * void (*BootloaderAPI_ErasePage)(uint32_t Address) = BOOTLOADER_API_CALL(0); - * void (*BootloaderAPI_WritePage)(uint32_t Address) = BOOTLOADER_API_CALL(1); - * void (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2); - * uint8_t (*BootloaderAPI_ReadSignature)(uint16_t Address) = BOOTLOADER_API_CALL(3); - * uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address) = BOOTLOADER_API_CALL(4); - * uint8_t (*BootloaderAPI_ReadLock)(void) = BOOTLOADER_API_CALL(5); - * void (*BootloaderAPI_WriteLock)(uint8_t LockBits) = BOOTLOADER_API_CALL(6); - * - * #define BOOTLOADER_MAGIC_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 2)) - * #define BOOTLOADER_MAGIC_SIGNATURE 0xDCFB - * - * #define BOOTLOADER_CLASS_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4)) - * #define BOOTLOADER_MASS_STORAGE_SIGNATURE 0xDF30 - * - * #define BOOTLOADER_ADDRESS_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8)) - * #define BOOTLOADER_ADDRESS_LENGTH 4 - * \endcode - * - * From the application the API support of the bootloader can be detected by reading the FLASH memory bytes located at address - * \c BOOTLOADER_MAGIC_SIGNATURE_START and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader - * can be determined by reading the FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them - * to the value \c BOOTLOADER_MASS_STORAGE_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes - * of FLASH memory starting from address \c BOOTLOADER_ADDRESS_START. - * - * \subsection SSec_Aux_Space Auxiliary Bootloader Section - * To make the bootloader function on smaller devices (those with a physical bootloader section of smaller than 6KB) a second - * section of memory (called the <i>Auxiliary Bootloader Section</i>) is added before the start of the real bootloader section, - * and is filled with a portion of the bootloader code. This allows smaller devices to run the bootloader, at the cost of an - * additional portion of the device's FLASH (the bootloader section size in KB subtracted from the 6KB total size). A small - * trampoline is inserted at the start of the auxiliary section so that the bootloader will run normally in the case of a blank - * application section. - * - * On devices supporting a 8KB bootloader section size, the AUX section is not created in the final binary. - * - * \subsection SSec_API_MemLayout Device Memory Map - * The following illustration indicates the final memory map of the device when loaded with the bootloader. - * - * \verbatim - * +----------------------------+ 0x0000 - * | | - * | | - * | | - * | | - * | | - * | | - * | | - * | | - * | User Application | - * | | - * | | - * | | - * | | - * | | - * | | - * | | - * | | - * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE - BOOT_AUX_SECTION_SIZE - * | Booloader Start Trampoline | - * | (Not User App. Accessible) | - * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE - BOOT_AUX_SECTION_SIZE + 4 - * | | - * | Auxiliary Bootloader | - * | Space for Smaller Devices | - * | (Not User App. Accessible) | - * | | - * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE - * | | - * | Bootloader Application | - * | (Not User App. Accessible) | - * | | - * +----------------------------+ FLASHEND - 96 - * | API Table Trampolines | - * | (Not User App. Accessible) | - * +----------------------------+ FLASHEND - 32 - * | Bootloader API Table | - * | (User App. Accessible) | - * +----------------------------+ FLASHEND - 8 - * | Bootloader ID Constants | - * | (User App. Accessible) | - * +----------------------------+ FLASHEND - * \endverbatim - * - * \section Sec_KnownIssues Known Issues: - * - * \par In some cases, the application is not fully loaded into the device. - * Write-caching on some operating systems may interfere with the normal - * operation of the bootloader. Write caching should be disabled when using the - * Mass Storage bootloader, or the file system synced via an appropriate command - * (such as the OS's normal disk ejection command) before disconnecting the device. - * - * \par After loading an application, it is not run automatically on startup. - * Some USB AVR boards ship with the BOOTRST fuse set, causing the bootloader - * to run automatically when the device is reset. In most cases, the BOOTRST - * fuse should be disabled and the HWBE fuse used instead to run the bootloader - * when needed. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * <table> - * <tr> - * <th><b>Define Name:</b></th> - * <th><b>Location:</b></th> - * <th><b>Description:</b></th> - * </tr> - * <tr> - * <td>NO_APP_START_ON_EJECT</td> - * <td>AppConfig.h</td> - * <td>Define to disable automatic start of the loaded application when the virtual - * Mass Storage disk is ejected on the host.</td> - * </tr> - * </table> - */ - |