diff options
3 files changed, 521 insertions, 0 deletions
diff --git a/keyboards/knops/mini/keymaps/default-gsm-newbs/config.h b/keyboards/knops/mini/keymaps/default-gsm-newbs/config.h new file mode 100644 index 000000000..999d8876c --- /dev/null +++ b/keyboards/knops/mini/keymaps/default-gsm-newbs/config.h @@ -0,0 +1,24 @@ +/* Copyright 2017 Pawnerd + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/knops/mini/keymaps/default-gsm-newbs/keymap.c b/keyboards/knops/mini/keymaps/default-gsm-newbs/keymap.c new file mode 100644 index 000000000..e35b8ec08 --- /dev/null +++ b/keyboards/knops/mini/keymaps/default-gsm-newbs/keymap.c @@ -0,0 +1,485 @@ +#include QMK_KEYBOARD_H + +/* +* Copy of knopps mini default May 16,2018 +* Added comments in code to more easilly understand it. +* +* Key Layout +* _____ _____ _____ +* | | | | | | +* | 1 | | 2 | | 3 | +* |_____| |_____| |_____| +* _____ _____ _____ +* | | | | | | +* | 4 | | 5 | | 6 | +* |_____| |_____| |_____| +* +* Each Layout row below keys. 1,2,3,4,5,6 +* +* Hold 3 when powering on for DFU Program Mode +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* +* Layer 0 (Default) +* _____ _____ _____ +* | | | | | | +* Stop VolUp Play +* |_____| |_____| |_____| +* _____ _____ _____ +* | | | | | | +* Prev VolDwn Next +* |_____| |_____| |_____| +* +* Button 1 (stop) is Held to activate Layer 3 only while held, User then selects the keymap to change to +*/ + LAYOUT( + LT(3, KC_MSTP), KC_VOLU, KC_MPLY, KC_MPRV, KC_VOLD, KC_MNXT), + +/* +* Layer 1 +* _____ _____ _____ +* | | | | | | +* ESC Macro3 Macro4 +* |_____| |_____| |_____| +* _____ _____ _____ +* | | | | | | +* Macro5 Macro6 Macro7 +* |_____| |_____| |_____| +* +*/ + LAYOUT( + LT(3, KC_ESC), M(3), M(4), M(5), M(6), M(7)), + +/* +* Layer 2 +* _____ _____ _____ +* | | | | | | +* | 1 | | 2 | | 3 | +* |_____| |_____| |_____| +* _____ _____ _____ +* | | | | | | +* | 4 | |Macro0 Macro1 +* |_____| |_____| |_____| +* +*/ + LAYOUT( + LT(3, KC_1), KC_2, KC_3, KC_4, M(0), M(1)), + +/* +* Layer 3 Key Layout +* This Layer does the Layer Selection +* _____ _____ _____ +* | | | | | DFU +* |None | |None | | FLash +* |_____| |_____| |_____| +* _____ _____ _____ +* | | | | | | +* Layer Layer Layer +* 0 1 2 +* |_____| |_____| |_____| +* +* Layers 0,1,2 have Button 1 held to activate this layer. Then press the specific layer to switch to it. +* +*/ + LAYOUT( + KC_TRNS, KC_TRNS, RESET, TO(0), TO(1), TO(2)), + +// More Layers that can be used, but are not by default + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; + +// Older way of Macros found here: https://docs.qmk.fm/features/macros + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + //keyevent_t event = record->event; + + switch (id) { + case 0: + if (record->event.pressed) { + /* + * This is Macro 0 + * Content: tglhf<enter> + */ + return MACRO( T(T), T(G), T(L), T(H), T(F), T(ENT), END ); + } + break; + case 1: + if (record->event.pressed) { + /* + * This is Macro 1 + * Content: tgg<enter> + */ + return MACRO( T(T), T(G), T(G), T(ENT), END ); + } + break; + case 2: + if (record->event.pressed) { + /* + * This is Macro 2 + * Content: Press and hold "no" , type "l", release "no"<enter> + * I haven't found what this "NO" key maps to + */ + return MACRO( D(NO), T(L), U(NO), END ); + } + break; + case 3: + if (record->event.pressed) { + /* + * This is Macro 3 + * Content: press/hold LCTRL, type "2", release LCTRL + */ + return MACRO( D(LCTL), T(Z), U(LCTL), END ); + } + break; + case 4: + if (record->event.pressed) { + /* + * This is Macro 4 + * Content: press/hold LCTRL, type "2", release LCTRL + */ + return MACRO( D(LCTL), D(LSFT), T(Z), U(LSFT), U(LCTL), END ); + } + break; + case 5: + if (record->event.pressed) { + /* + * This is Macro 5 + * Content: press/hold LCTRL, type "x", release LCTRL + */ + return MACRO( D(LCTL), T(X), U(LCTL), END ); + } + break; + case 6: + if (record->event.pressed) { + /* + * This is Macro 6 + * Content: press/hold LCTRL, type "c", release LCTRL + */ + return MACRO( D(LCTL), T(C), U(LCTL), END ); + } + break; + case 7: + if (record->event.pressed) { + /* + * This is Macro 7 + * Content: press/hold LCTRL, type "v", release LCTRL + */ + return MACRO( D(LCTL), T(V), U(LCTL), END ); + } + break; + } + return MACRO_NONE; +} + + + +void set_switch_led(int ledId, bool state) { + if(state) { + switch(ledId) { + case 1: + PORTD |= (1<<7); + break; + case 2: + if((PINB & (1 << 7)) != 0) { + PORTC |= (1<<6); + } else { + PORTC |= (1<<7); + } + break; + case 3: + PORTD |= (1<<4); + break; + case 4: + PORTE |= (1<<6); + break; + case 5: + PORTB |= (1<<4); + break; + case 6: + PORTD |= (1<<6); + break; + } + } else { + switch(ledId) { + case 1: + PORTD &= ~(1<<7); + break; + case 2: + if((PINB & (1 << 7)) != 0) { + PORTC &= ~(1<<6); + } else { + PORTC &= ~(1<<7); + } + break; + case 3: + PORTD &= ~(1<<4); + break; + case 4: + PORTE &= ~(1<<6); + break; + case 5: + PORTB &= ~(1<<4); + break; + case 6: + PORTD &= ~(1<<6); + break; + } + } +} + + +void set_layer_led(int layerId) { + PORTD |= (1<<5); + PORTB &= ~(1<<6); + PORTB |= (1<<0); + switch(layerId) { + case 0: + PORTD &= ~(1<<5); + break; + case 1: + PORTB |= (1<<6); + break; + case 2: + PORTB &= ~(1<<0); + break; + } +} + +void matrix_init_user(void) { + led_init_ports(); + + PORTB |= (1 << 7); + DDRB &= ~(1<<7); + + PORTD |= (1<<7); + PORTC |= (1<<6); + PORTC |= (1<<7); + PORTD |= (1<<4); + PORTE |= (1<<6); + PORTB |= (1<<4); + PORTD |= (1<<6); + + set_layer_led(0); +} + +void matrix_scan_user(void) { +} + +void led_init_ports() { + // led voor switch #1 + DDRD |= (1<<7); + PORTD &= ~(1<<7); + + // led voor switch #2 + DDRC |= (1<<6); + DDRC |= (1<<7); + PORTC &= ~(1<<6); + PORTC &= ~(1<<7); + + // led voor switch #3 + DDRD |= (1<<4); + PORTD &= ~(1<<4); + + // led voor switch #4 + DDRE |= (1<<6); + PORTE &= ~(1<<6); + + // led voor switch #5 + DDRB |= (1<<4); + PORTB &= ~(1<<4); + + // led voor switch #6 + DDRD |= (1<<6); + PORTD &= ~(1<<6); + + /* + DDRD |= (1<<7); + PORTD |= (1<<7); + + DDRC |= (1<<6); + PORTC |= (1<<6); + + DDRD |= (1<<4); + PORTD |= (1<<4); + + DDRE |= (1<<6); + PORTE |= (1<<6); + + DDRB |= (1<<4); + PORTB |= (1<<4); + + DDRD |= (1<<6); + PORTD |= (1<<6); + // */ + + DDRD |= (1<<5); + DDRB |= (1<<6); + DDRB |= (1<<0); + //led_set_layer(0); +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} + + +/* +* NOTE: +* +* In case you don't understand this coding stuff, please +* feel free to mail me or post something +* at the /r/knops subreddit and I will configure the code as +* you wish for your needs to make the LEDs do what you want :-). +* +* Contact me at: support@knops.io +* +* +* Knops Mini LED Numbers: +* _____ _____ _____ +* | | | | | | +* | 1 | | 2 | | 3 | <--- +* |_____| |_____| |_____| | These LEDs are called 'Switch LEDs' +* _____ _____ _____ |----- To turn on/off these leds, use: +* | | | | | | | set_switch_led( [1-6], [true/false]); +* | 4 | | 5 | | 6 | <--- +* |_____| |_____| |_____| +* +* < 0 > < 1 > < 2 > <--- These front-LEDs are called 'Layer LEDs' +* To turn one of them on, use: +* set_layer_led( [0-2] ); +* +*/ + +/* +* This function led_set_layer gets called when you switch between layers. +* It allows you to turn on and off leds for each different layer and do +* other cool stuff. Currently the GUI does not have LED support. I am working +* on that, but takes time. +*/ +void led_set_layer(int layer) { + switch(layer) { + + /** + * Here is an example to turn LEDs on and of. By default: + * - the LEDs are turned on in layer 0 + * - the LEDs are turned off in layer 1 + * - the LEDs don't change from state for layer 2 + */ + + case 0: + set_layer_led(0); // Turn on only the first/left layer indicator + set_switch_led(1, true); + set_switch_led(2, true); + set_switch_led(3, true); + set_switch_led(4, true); + set_switch_led(5, true); + set_switch_led(6, true); + break; + + case 1: + set_layer_led(1); // Turn on only the second/middle layer indicator + set_switch_led(1, false); + set_switch_led(2, false); + set_switch_led(3, false); + set_switch_led(4, false); + set_switch_led(5, false); + set_switch_led(6, false); + break; + + case 2: + set_layer_led(2); // Turn on only the third/right layer indicator + + // Keep leds for layer two in their current state, since we don't use set_switch_led(SWITCH_ID, TRUE_OR_FALSE) + + break; + } +} + +bool process_record_user (uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + case TO(0): + if (record->event.pressed) { + led_set_layer(0); + } + break; + case TO(1): + if (record->event.pressed) { + led_set_layer(1); + } + break; + case TO(2): + if (record->event.pressed) { + led_set_layer(2); + } + break; + } + return true; +} diff --git a/keyboards/knops/mini/keymaps/default-gsm-newbs/readme.md b/keyboards/knops/mini/keymaps/default-gsm-newbs/readme.md new file mode 100644 index 000000000..784ef19af --- /dev/null +++ b/keyboards/knops/mini/keymaps/default-gsm-newbs/readme.md @@ -0,0 +1,12 @@ +# Copy of Default Knops Mini Keymap + +*Note:* copy of knops,mini,default keymap on May 16,2018 with comments to help new user to QMK and knops mini create their own keymap + +## Key Layout + + 1 | 2 | 3 + 4 | 5 | 6 + +## Programming Keypad + +Hold 3 when powering on for DFU Program Mode |