diff options
49 files changed, 1515 insertions, 117 deletions
diff --git a/build_keyboard.mk b/build_keyboard.mk index 61aebf393..42f8f8ac7 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -174,6 +174,12 @@ ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c endif +ifeq ($(strip $(PRINTING_ENABLE)), yes) + OPT_DEFS += -DPRINTING_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c + SRC += $(TMK_DIR)/protocol/serial_uart.c +endif + ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes) SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC)) OPT_DEFS += $(SERIAL_DEFS) diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h index d98e0e9f2..7c06f9a6c 100644 --- a/keyboards/amj60/config.h +++ b/keyboards/amj60/config.h @@ -67,7 +67,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h index 8c9497232..f40876ffb 100644 --- a/keyboards/clueboard/rev1/config.h +++ b/keyboards/clueboard/rev1/config.h @@ -26,7 +26,7 @@ /* Underlight configuration */ #define RGB_DI_PIN B2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h index 15ca4ece8..8435fd02b 100644 --- a/keyboards/clueboard/rev2/config.h +++ b/keyboards/clueboard/rev2/config.h @@ -30,7 +30,7 @@ /* Underlight configuration */ #define RGB_DI_PIN D7 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/config.h b/keyboards/cluecard/config.h index 765347b13..6520eb557 100644 --- a/keyboards/cluecard/config.h +++ b/keyboards/cluecard/config.h @@ -140,7 +140,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Underlight configuration */ #define RGB_DI_PIN E6 -//#define RGBLIGHT_TIMER +//#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/keymaps/rgb_effects/config.h b/keyboards/cluecard/keymaps/rgb_effects/config.h index e88847df4..c6c9342c8 100644 --- a/keyboards/cluecard/keymaps/rgb_effects/config.h +++ b/keyboards/cluecard/keymaps/rgb_effects/config.h @@ -4,7 +4,7 @@ #include "../../config.h" // place overrides here -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_SNAKE_LENGTH 3 #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2 diff --git a/keyboards/cluepad/config.h b/keyboards/cluepad/config.h index bae05fade..bd64dfd27 100644 --- a/keyboards/cluepad/config.h +++ b/keyboards/cluepad/config.h @@ -70,7 +70,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Underlight configuration */ #define RGB_DI_PIN F6 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h index edc60caae..049c707a5 100644 --- a/keyboards/ergodox/config.h +++ b/keyboards/ergodox/config.h @@ -1,6 +1,8 @@ #ifndef KEYBOARDS_ERGODOX_CONFIG_H_ #define KEYBOARDS_ERGODOX_CONFIG_H_ +#include "config_common.h" + #define MOUSEKEY_DELAY 100 #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_MAX_SPEED 3 diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c index ddb8ff0cf..039e4c6bb 100644 --- a/keyboards/ergodox/ez/ez.c +++ b/keyboards/ergodox/ez/ez.c @@ -16,10 +16,10 @@ void matrix_init_kb(void) { // unused pins - C7, D4, D5, D7, E6 // set as input with internal pull-ip enabled DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); + DDRD &= ~(1<<5 | 1<<4); DDRE &= ~(1<<6); PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); + PORTD |= (1<<5 | 1<<4); PORTE |= (1<<6); ergodox_blink_all_leds(); @@ -51,6 +51,10 @@ uint8_t init_mcp23018(void) { mcp23018_status = 0x20; // I2C subsystem + + uint8_t sreg_prev; + sreg_prev=SREG; + cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized++; @@ -79,6 +83,8 @@ uint8_t init_mcp23018(void) { out: i2c_stop(); + SREG=sreg_prev; + return mcp23018_status; } diff --git a/keyboards/ergodox/ez/matrix.c b/keyboards/ergodox/ez/matrix.c index a19bab90b..43f515259 100644 --- a/keyboards/ergodox/ez/matrix.c +++ b/keyboards/ergodox/ez/matrix.c @@ -121,7 +121,7 @@ void matrix_init(void) matrix_scan_count = 0; #endif - matrix_init_kb(); + matrix_init_quantum(); } diff --git a/keyboards/ergodox/keymaps/erez_experimental/Makefile b/keyboards/ergodox/keymaps/erez_experimental/Makefile index b673c5ce5..dbe89d141 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/Makefile +++ b/keyboards/ergodox/keymaps/erez_experimental/Makefile @@ -3,6 +3,8 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend COMMAND_ENABLE = no # Commands for debug and configuration +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/ergodox/keymaps/erez_experimental/config.h b/keyboards/ergodox/keymaps/erez_experimental/config.h index e5d7fe188..fbd12ab79 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/config.h +++ b/keyboards/ergodox/keymaps/erez_experimental/config.h @@ -8,5 +8,16 @@ #undef LEADER_TIMEOUT #define LEADER_TIMEOUT 300 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +#define RGB_MIDI +#define RGBW_BB_TWI #endif diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c index 4804959d6..4a23c7ac5 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/keymap.c +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -7,6 +7,12 @@ #define SYMB 1 // symbols #define MDIA 2 // media keys +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + RGB_FF00BB // always start with RGB_ +}; + + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer * @@ -67,22 +73,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-------------. ,-------------. * | | | | | | * ,------|------|------| |------+------+------. - * | | | | | | | | + * |VAI |VAD |HUI | |SAI |TOG |MOD | * | | |------| |------| | | - * | | | | | | | | + * | | |HUD | |SAD | | | * `--------------------' `--------------------' */ // SYMBOLS [SYMB] = KEYMAP( // left hand - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + RGB_FF00BB, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,LCTL(KC_PGUP), LCTL(KC_PGDN), KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, + RGB_HUI, + RGB_VAI,RGB_VAD,RGB_HUD, // right hand KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, @@ -90,8 +96,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_PIPE, KC_AT, KC_EQL, KC_PERC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS + RGB_SAI, + RGB_SAD, RGB_TOG, RGB_MOD ), /* Keymap 2: Media and mouse keys * @@ -152,6 +158,22 @@ void matrix_init_user(void) { }; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case RGB_FF00BB: + if (record->event.pressed) { + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0xff,0x00,0xbb); + } + return false; + break; + } + return true; +} + LEADER_EXTERNS(); // Runs constantly in the background, in a loop. diff --git a/keyboards/ergodox/keymaps/jack/Makefile b/keyboards/ergodox/keymaps/jack/Makefile new file mode 100644 index 000000000..7c257af50 --- /dev/null +++ b/keyboards/ergodox/keymaps/jack/Makefile @@ -0,0 +1,6 @@ +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h new file mode 100644 index 000000000..5c1165226 --- /dev/null +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -0,0 +1,17 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +#define RGB_MIDI +#define RGBW_BB_TWI + +#endif
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/jack/keymap.c b/keyboards/ergodox/keymaps/jack/keymap.c index dda253fa4..eb41f1212 100644 --- a/keyboards/ergodox/keymaps/jack/keymap.c +++ b/keyboards/ergodox/keymaps/jack/keymap.c @@ -19,14 +19,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_SPC,KC_SPC,KC_END, // right hand - KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, - KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_NO, M(1), KC_7, KC_8, KC_9, KC_0, KC_NO, + KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_P, KC_BSPC, + RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_SCLN, KC_QUOT, KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT, MO(1), KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, - KC_NO, KC_NO, - KC_PGUP, - KC_PGDN, KC_SPC,KC_SPC + RGB_TOG, RGB_HUI, + RGB_MOD, + M(2), KC_SPC,KC_SPC ), [SYMB] = KEYMAP( // left hand @@ -84,6 +84,16 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) unregister_code(KC_RSFT); } break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; + case 2: + if (record->event.pressed) { // For resetting EEPROM + send_unicode_midi(0x0CA0); + } + break; } return MACRO_NONE; }; diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index 6a29e6b8c..bcd753461 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -182,7 +182,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ws2812_pin PF4 */ #define RGB_DI_PIN F4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/handwired/minorca/keymaps/rgb/config.h b/keyboards/handwired/minorca/keymaps/rgb/config.h index deaac2e26..43b3c5911 100644 --- a/keyboards/handwired/minorca/keymaps/rgb/config.h +++ b/keyboards/handwired/minorca/keymaps/rgb/config.h @@ -11,7 +11,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D5 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 13 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h index e2594f4b3..047be5707 100644 --- a/keyboards/jd40/config.h +++ b/keyboards/jd40/config.h @@ -70,7 +70,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. ) #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 12 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h index 2f39ea8e5..43abf6228 100644 --- a/keyboards/kc60/keymaps/ws2812/config.h +++ b/keyboards/kc60/keymaps/ws2812/config.h @@ -2,7 +2,7 @@ /* WS2812B RGB Underglow LED */ #define RGB_DI_PIN F5 // Based on wiring depicted in ws2812_wiring.jpg -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 1b7bbcbbb..4db45ab0b 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -49,6 +49,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) + /* disable debug print */ //#define NO_DEBUG @@ -68,4 +69,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef SUBPROJECT_rev2 #include "rev2/config.h" #endif -#endif
\ No newline at end of file +#endif diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index 2671fabf6..72e5ae66b 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -75,7 +75,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index f4d900acc..b0ad522fc 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -75,7 +75,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index 983a1d73f..71a33498b 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -63,7 +63,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Underlight configuration */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 20 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/default/Makefile b/keyboards/planck/keymaps/default/Makefile index 0f4953888..267a087ea 100644 --- a/keyboards/planck/keymaps/default/Makefile +++ b/keyboards/planck/keymaps/default/Makefile @@ -5,17 +5,17 @@ # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls +MIDI_ENABLE = yes # MIDI controls AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 5f71ae7d1..ddbe4d7b2 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -107,7 +107,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -125,7 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index 52acd1905..cc093bee4 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -9,7 +9,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN B1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/thermal_printer/Makefile b/keyboards/planck/keymaps/thermal_printer/Makefile new file mode 100644 index 000000000..3d1d11877 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/Makefile @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +PRINTING_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h new file mode 100644 index 000000000..430b6493c --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/config.h @@ -0,0 +1,23 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +# define SERIAL_UART_BAUD 19200 +# define SERIAL_UART_DATA UDR1 +# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +# define SERIAL_UART_RXD_VECT USART1_RX_vect +# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +# define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX */ \ + UCSR1B = _BV(TXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + sei(); \ + } while(0) + + #endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/thermal_printer/keymap.c b/keyboards/planck/keymaps/thermal_printer/keymap.c new file mode 100644 index 000000000..e88059731 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/keymap.c @@ -0,0 +1,314 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | Print|no prnt | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, PRINT_ON, PRINT_OFF, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/thermal_printer/readme.md b/keyboards/planck/keymaps/thermal_printer/readme.md new file mode 100644 index 000000000..de9680b49 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/planck/keymaps/yang/config.h b/keyboards/planck/keymaps/yang/config.h index feb5a1190..4ed19d76f 100644 --- a/keyboards/planck/keymaps/yang/config.h +++ b/keyboards/planck/keymaps/yang/config.h @@ -5,7 +5,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index 3fb978c2f..f88acf211 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -63,7 +63,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h index 086baa84f..e6099ceb8 100644 --- a/keyboards/preonic/keymaps/kinesis/config.h +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -63,7 +63,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h index 7e9f91cc8..eb357b39e 100644 --- a/keyboards/satan/config.h +++ b/keyboards/satan/config.h @@ -67,7 +67,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index 5d8757936..19cf9c9b3 100644 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -67,7 +67,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /*#define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 2 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/quantum/keymap.h b/quantum/keymap.h index a01bbfbd1..ae56d16c7 100644 --- a/quantum/keymap.h +++ b/quantum/keymap.h @@ -178,6 +178,10 @@ enum quantum_keycodes { // Right shift, close paren KC_RSPC, + // Printing + PRINT_ON, + PRINT_OFF, + // always leave at the end SAFE_RANGE }; diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index 401845e85..a883b1388 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -16,14 +16,128 @@ #include <util/delay.h> #include "debug.h" +#ifdef RGBW_BB_TWI + +// Port for the I2C +#define I2C_DDR DDRD +#define I2C_PIN PIND +#define I2C_PORT PORTD + +// Pins to be used in the bit banging +#define I2C_CLK 0 +#define I2C_DAT 1 + +#define I2C_DATA_HI()\ +I2C_DDR &= ~ (1 << I2C_DAT);\ +I2C_PORT |= (1 << I2C_DAT); +#define I2C_DATA_LO()\ +I2C_DDR |= (1 << I2C_DAT);\ +I2C_PORT &= ~ (1 << I2C_DAT); + +#define I2C_CLOCK_HI()\ +I2C_DDR &= ~ (1 << I2C_CLK);\ +I2C_PORT |= (1 << I2C_CLK); +#define I2C_CLOCK_LO()\ +I2C_DDR |= (1 << I2C_CLK);\ +I2C_PORT &= ~ (1 << I2C_CLK); + +#define I2C_DELAY 1 + +void I2C_WriteBit(unsigned char c) +{ + if (c > 0) + { + I2C_DATA_HI(); + } + else + { + I2C_DATA_LO(); + } + + I2C_CLOCK_HI(); + _delay_us(I2C_DELAY); + + I2C_CLOCK_LO(); + _delay_us(I2C_DELAY); + + if (c > 0) + { + I2C_DATA_LO(); + } + + _delay_us(I2C_DELAY); +} + +// Inits bitbanging port, must be called before using the functions below +// +void I2C_Init() +{ + I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); + + I2C_CLOCK_HI(); + I2C_DATA_HI(); + + _delay_us(I2C_DELAY); +} + +// Send a START Condition +// +void I2C_Start() +{ + // set both to high at the same time + I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); + _delay_us(I2C_DELAY); + + I2C_DATA_LO(); + _delay_us(I2C_DELAY); + + I2C_CLOCK_LO(); + _delay_us(I2C_DELAY); +} + +// Send a STOP Condition +// +void I2C_Stop() +{ + I2C_CLOCK_HI(); + _delay_us(I2C_DELAY); + + I2C_DATA_HI(); + _delay_us(I2C_DELAY); +} + +// write a byte to the I2C slave device +// +unsigned char I2C_Write(unsigned char c) +{ + for (char i = 0; i < 8; i++) + { + I2C_WriteBit(c & 128); + + c <<= 1; + } + + + I2C_WriteBit(0); + _delay_us(I2C_DELAY); + _delay_us(I2C_DELAY); + + // _delay_us(I2C_DELAY); + //return I2C_ReadBit(); + return 0; +} + + +#endif + // Setleds for standard RGB -void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) +void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF)); } -void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) +void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) { // ws2812_DDRREG |= pinmask; // Enable DDR // new universal format (DDR) @@ -34,14 +148,41 @@ void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pin } // Setleds for SK6812RGBW -void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) +void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) { + + #ifdef RGBW_BB_TWI + uint8_t sreg_prev, twcr_prev; + sreg_prev=SREG; + twcr_prev=TWCR; + cli(); + TWCR &= ~(1<<TWEN); + I2C_Init(); + I2C_Start(); + I2C_Write(0x84); + uint16_t datlen = leds<<2; + uint8_t curbyte; + uint8_t * data = (uint8_t*)ledarray; + while (datlen--) { + curbyte=*data++; + I2C_Write(curbyte); + } + I2C_Stop(); + SREG=sreg_prev; + TWCR=twcr_prev; + #endif + + // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR // new universal format (DDR) _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF); ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF)); - _delay_us(80); + + + #ifndef RGBW_BB_TWI + _delay_us(80); + #endif } void ws2812_sendarray(uint8_t *data,uint16_t datlen) @@ -123,7 +264,7 @@ void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) cli(); while (datlen--) { - curbyte=*data++; + curbyte=(*data++); asm volatile( " ldi %0,8 \n\t" diff --git a/quantum/light_ws2812.h b/quantum/light_ws2812.h index 54eef22d9..0bef93d5e 100755 --- a/quantum/light_ws2812.h +++ b/quantum/light_ws2812.h @@ -16,6 +16,21 @@ #include <avr/io.h> #include <avr/interrupt.h> //#include "ws2812_config.h" +#include "i2cmaster.h" + +#define LIGHT_I2C 1 +#define LIGHT_I2C_ADDR 0x84 +#define LIGHT_I2C_ADDR_WRITE ( (LIGHT_I2C_ADDR<<1) | I2C_WRITE ) +#define LIGHT_I2C_ADDR_READ ( (LIGHT_I2C_ADDR<<1) | I2C_READ ) + +#define RGBW 1 + +#ifdef RGBW + #define LED_TYPE struct cRGBW +#else + #define LED_TYPE struct cRGB +#endif + /* * Structure of the LED array @@ -42,9 +57,9 @@ struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;}; * - Wait 50�s to reset the LEDs */ -void ws2812_setleds (struct cRGB *ledarray, uint16_t number_of_leds); -void ws2812_setleds_pin (struct cRGB *ledarray, uint16_t number_of_leds,uint8_t pinmask); -void ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t number_of_leds); +void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds); +void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask); +void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); /* * Old interface / Internal functions diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c new file mode 100644 index 000000000..2e11dd366 --- /dev/null +++ b/quantum/process_keycode/process_printer.c @@ -0,0 +1,254 @@ +#include "process_printer.h" +#include "action_util.h" + +bool printing_enabled = false; +uint8_t character_shift = 0; + +void enabled_printing() { + printing_enabled = true; + serial_init(); +} + +void disable_printing() { + printing_enabled = false; +} + +uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0x28, 0x29}; + +// uint8_t keycode_to_ascii[0xFF][2]; + +// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; + +void print_char(char c) { + USB_Disable(); + serial_send(c); + USB_Init(); +} + +void print_box_string(uint8_t text[]) { + uint8_t len = strlen(text); + uint8_t out[len * 3 + 8]; + out[0] = 0xDA; + for (uint8_t i = 0; i < len; i++) { + out[i+1] = 0xC4; + } + out[len + 1] = 0xBF; + out[len + 2] = '\n'; + + out[len + 3] = 0xB3; + for (uint8_t i = 0; i < len; i++) { + out[len + 4 + i] = text[i]; + } + out[len * 2 + 4] = 0xB3; + out[len * 2 + 5] = '\n'; + + + out[len * 2 + 6] = 0xC0; + for (uint8_t i = 0; i < len; i++) { + out[len * 2 + 7 + i] = 0xC4; + } + out[len * 3 + 7] = 0xD9; + out[len * 3 + 8] = '\n'; + + print_string(out); +} + +void print_string(char c[]) { + for(uint8_t i = 0; i < strlen(c); i++) + print_char(c[i]); +} + +bool process_printer(uint16_t keycode, keyrecord_t *record) { + if (keycode == PRINT_ON) { + enabled_printing(); + return false; + } + if (keycode == PRINT_OFF) { + disable_printing(); + return false; + } + + if (printing_enabled) { + switch(keycode) { + case KC_EXLM ... KC_RPRN: + case KC_UNDS: + case KC_PLUS: + case KC_LCBR: + case KC_RCBR: + case KC_PIPE: + case KC_TILD: + keycode &= 0xFF; + case KC_LSFT: + case KC_RSFT: + if (record->event.pressed) { + character_shift++; + } else { + character_shift--; + } + return false; + break; + } + + switch(keycode) { + case KC_F1: + if (record->event.pressed) { + print_box_string("This is a line of text!"); + } + return false; + case KC_ESC: + if (record->event.pressed) { + print_char(0x1B); + } + return false; + break; + case KC_SPC: + if (record->event.pressed) { + print_char(0x20); + } + return false; + break; + case KC_A ... KC_Z: + if (record->event.pressed) { + if (character_shift) { + print_char(0x41 + (keycode - KC_A)); + } else { + print_char(0x61 + (keycode - KC_A)); + } + } + return false; + break; + case KC_1 ... KC_0: + if (record->event.pressed) { + if (character_shift) { + print_char(shifted_numbers[keycode - KC_1]); + } else { + print_char(0x30 + ((keycode - KC_1 + 1) % 10)); + } + } + return false; + break; + case KC_ENT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x0C); + } else { + print_char(0x0A); + } + } + return false; + break; + case KC_BSPC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x18); + } else { + print_char(0x1A); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3E); + } else { + print_char(0x2E); + } + } + return false; + break; + case KC_COMM: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3C); + } else { + print_char(0x2C); + } + } + return false; + break; + case KC_SLSH: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3F); + } else { + print_char(0x2F); + } + } + return false; + break; + case KC_QUOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x22); + } else { + print_char(0x27); + } + } + return false; + break; + case KC_GRV: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7E); + } else { + print_char(0x60); + } + } + return false; + break; + case KC_MINS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x5F); + } else { + print_char(0x2D); + } + } + return false; + break; + case KC_EQL: + if (record->event.pressed) { + if (character_shift) { + print_char(0x2B); + } else { + print_char(0x3D); + } + } + return false; + break; + case KC_LBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7B); + } else { + print_char(0x5B); + } + } + return false; + break; + case KC_RBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7D); + } else { + print_char(0x5D); + } + } + return false; + break; + case KC_BSLS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7C); + } else { + print_char(0x5C); + } + } + return false; + break; + } + } + return true; + +}
\ No newline at end of file diff --git a/quantum/process_keycode/process_printer.h b/quantum/process_keycode/process_printer.h new file mode 100644 index 000000000..fdd36d75a --- /dev/null +++ b/quantum/process_keycode/process_printer.h @@ -0,0 +1,8 @@ +#ifndef PROCESS_PRINTER_H +#define PROCESS_PRINTER_H + +#include "quantum.h" + +#include "protocol/serial.h" + +#endif
\ No newline at end of file diff --git a/quantum/process_keycode/process_printer_bb.c b/quantum/process_keycode/process_printer_bb.c new file mode 100644 index 000000000..1924d0377 --- /dev/null +++ b/quantum/process_keycode/process_printer_bb.c @@ -0,0 +1,260 @@ +#include "process_printer.h" +#include "action_util.h" + +bool printing_enabled = false; +uint8_t character_shift = 0; + +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_MASK _BV(PD3) +#define SERIAL_DELAY 52 + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + + +void enabled_printing() { + printing_enabled = true; + serial_output(); + serial_high(); +} + +void disable_printing() { + printing_enabled = false; +} + +uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0x28, 0x29}; + +// uint8_t keycode_to_ascii[0xFF][2]; + +// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; + +void print_char(char c) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(c & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +void print_string(char c[]) { + for(uint8_t i = 0; i < strlen(c); i++) + print_char(c[i]); +} + +bool process_printer(uint16_t keycode, keyrecord_t *record) { + if (keycode == PRINT_ON) { + enabled_printing(); + return false; + } + if (keycode == PRINT_OFF) { + disable_printing(); + return false; + } + + if (printing_enabled) { + switch(keycode) { + case KC_EXLM ... KC_RPRN: + case KC_UNDS: + case KC_PLUS: + case KC_LCBR: + case KC_RCBR: + case KC_PIPE: + case KC_TILD: + keycode &= 0xFF; + case KC_LSFT: + case KC_RSFT: + if (record->event.pressed) { + character_shift++; + } else { + character_shift--; + } + return false; + break; + } + + switch(keycode) { + case KC_F1: + if (record->event.pressed) { + print_string("This is a line of text!\n\n\n"); + } + return false; + case KC_ESC: + if (record->event.pressed) { + print_char(0x1B); + } + return false; + break; + case KC_SPC: + if (record->event.pressed) { + print_char(0x20); + } + return false; + break; + case KC_A ... KC_Z: + if (record->event.pressed) { + if (character_shift) { + print_char(0x41 + (keycode - KC_A)); + } else { + print_char(0x61 + (keycode - KC_A)); + } + } + return false; + break; + case KC_1 ... KC_0: + if (record->event.pressed) { + if (character_shift) { + print_char(shifted_numbers[keycode - KC_1]); + } else { + print_char(0x30 + ((keycode - KC_1 + 1) % 10)); + } + } + return false; + break; + case KC_ENT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x0C); + } else { + print_char(0x0A); + } + } + return false; + break; + case KC_BSPC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x18); + } else { + print_char(0x1A); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3E); + } else { + print_char(0x2E); + } + } + return false; + break; + case KC_COMM: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3C); + } else { + print_char(0x2C); + } + } + return false; + break; + case KC_SLSH: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3F); + } else { + print_char(0x2F); + } + } + return false; + break; + case KC_QUOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x22); + } else { + print_char(0x27); + } + } + return false; + break; + case KC_GRV: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7E); + } else { + print_char(0x60); + } + } + return false; + break; + case KC_MINS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x5F); + } else { + print_char(0x2D); + } + } + return false; + break; + case KC_EQL: + if (record->event.pressed) { + if (character_shift) { + print_char(0x2B); + } else { + print_char(0x3D); + } + } + return false; + break; + case KC_LBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7B); + } else { + print_char(0x5B); + } + } + return false; + break; + case KC_RBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7D); + } else { + print_char(0x5D); + } + } + return false; + break; + case KC_BSLS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7C); + } else { + print_char(0x5C); + } + } + return false; + break; + } + } + return true; + +}
\ No newline at end of file diff --git a/quantum/quantum.c b/quantum/quantum.c index 098312e6e..9fd9a6ef7 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -129,6 +129,9 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef UCIS_ENABLE process_ucis(keycode, record) && #endif + #ifdef PRINTING_ENABLE + process_printer(keycode, record) && + #endif #ifdef UNICODEMAP_ENABLE process_unicode_map(keycode, record) && #endif diff --git a/quantum/quantum.h b/quantum/quantum.h index 0c6046649..06a2e049d 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -59,6 +59,10 @@ extern uint32_t default_layer_state; #include "process_tap_dance.h" +#ifdef PRINTING_ENABLE + #include "process_printer.h" +#endif + #define SEND_STRING(str) send_string(PSTR(str)) void send_string(const char *str); diff --git a/quantum/rgblight.c b/quantum/rgblight.c index d550c5866..00620da58 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -69,11 +69,12 @@ const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20}; rgblight_config_t rgblight_config; rgblight_config_t inmem_config; -struct cRGB led[RGBLED_NUM]; -uint8_t rgblight_inited = 0; +LED_TYPE led[RGBLED_NUM]; +uint8_t rgblight_inited = 0; +bool rgblight_timer_enabled = false; -void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) { +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { uint8_t r = 0, g = 0, b = 0, base, color; if (sat == 0) { // Acromatic color (gray). Hue doesn't mind. @@ -124,7 +125,7 @@ void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) { setrgb(r, g, b, led1); } -void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1) { +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) { (*led1).r = r; (*led1).g = g; (*led1).b = b; @@ -141,9 +142,9 @@ void eeconfig_update_rgblight_default(void) { dprintf("eeconfig_update_rgblight_default\n"); rgblight_config.enable = 1; rgblight_config.mode = 1; - rgblight_config.hue = 200; - rgblight_config.sat = 204; - rgblight_config.val = 204; + rgblight_config.hue = 0; + rgblight_config.sat = 255; + rgblight_config.val = 255; eeconfig_update_rgblight(rgblight_config.raw); } void eeconfig_debug_rgblight(void) { @@ -173,7 +174,7 @@ void rgblight_init(void) { } eeconfig_debug_rgblight(); // display current eeprom values - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_init(); // setup the timer #endif @@ -220,7 +221,7 @@ void rgblight_mode(uint8_t mode) { eeconfig_update_rgblight(rgblight_config.raw); xprintf("rgblight mode: %u\n", rgblight_config.mode); if (rgblight_config.mode == 1) { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 23) { @@ -230,7 +231,7 @@ void rgblight_mode(uint8_t mode) { // MODE 15-20, snake // MODE 21-23, knight - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); #endif } @@ -244,7 +245,7 @@ void rgblight_toggle(void) { if (rgblight_config.enable) { rgblight_mode(rgblight_config.mode); } else { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif _delay_ms(50); @@ -252,6 +253,13 @@ void rgblight_toggle(void) { } } +void rgblight_enable(void) { + rgblight_config.enable = 1; + eeconfig_update_rgblight(rgblight_config.raw); + xprintf("rgblight enable: rgblight_config.enable = %u\n", rgblight_config.enable); + rgblight_mode(rgblight_config.mode); +} + void rgblight_increase_hue(void) { uint16_t hue; @@ -307,7 +315,7 @@ void rgblight_decrease_val(void) { void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { inmem_config.raw = rgblight_config.raw; if (rgblight_config.enable) { - struct cRGB tmp_led; + LED_TYPE tmp_led; sethsv(hue, sat, val, &tmp_led); inmem_config.hue = hue; inmem_config.sat = sat; @@ -351,66 +359,78 @@ void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { void rgblight_set(void) { if (rgblight_config.enable) { - ws2812_setleds(led, RGBLED_NUM); + #ifdef RGBW + ws2812_setleds_rgbw(led, RGBLED_NUM); + #else + ws2812_setleds(led, RGBLED_NUM); + #endif } else { for (uint8_t i = 0; i < RGBLED_NUM; i++) { led[i].r = 0; led[i].g = 0; led[i].b = 0; } - ws2812_setleds(led, RGBLED_NUM); + #ifdef RGBW + ws2812_setleds_rgbw(led, RGBLED_NUM); + #else + ws2812_setleds(led, RGBLED_NUM); + #endif } } -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS // Animation timer -- AVR Timer3 void rgblight_timer_init(void) { - static uint8_t rgblight_timer_is_init = 0; - if (rgblight_timer_is_init) { - return; - } - rgblight_timer_is_init = 1; - /* Timer 3 setup */ - TCCR3B = _BV(WGM32) //CTC mode OCR3A as TOP - | _BV(CS30); //Clock selelct: clk/1 - /* Set TOP value */ - uint8_t sreg = SREG; - cli(); - OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; - OCR3AL = RGBLED_TIMER_TOP & 0xff; - SREG = sreg; + // static uint8_t rgblight_timer_is_init = 0; + // if (rgblight_timer_is_init) { + // return; + // } + // rgblight_timer_is_init = 1; + // /* Timer 3 setup */ + // TCCR3B = _BV(WGM32) // CTC mode OCR3A as TOP + // | _BV(CS30); // Clock selelct: clk/1 + // /* Set TOP value */ + // uint8_t sreg = SREG; + // cli(); + // OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; + // OCR3AL = RGBLED_TIMER_TOP & 0xff; + // SREG = sreg; + + rgblight_timer_enabled = true; } void rgblight_timer_enable(void) { - TIMSK3 |= _BV(OCIE3A); + rgblight_timer_enabled = true; dprintf("TIMER3 enabled.\n"); } void rgblight_timer_disable(void) { - TIMSK3 &= ~_BV(OCIE3A); + rgblight_timer_enabled = false; dprintf("TIMER3 disabled.\n"); } void rgblight_timer_toggle(void) { - TIMSK3 ^= _BV(OCIE3A); + rgblight_timer_enabled ^= rgblight_timer_enabled; dprintf("TIMER3 toggled.\n"); } -ISR(TIMER3_COMPA_vect) { - // mode = 1, static light, do nothing here - if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { - // mode = 2 to 5, breathing mode - rgblight_effect_breathing(rgblight_config.mode - 2); - } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { - // mode = 6 to 8, rainbow mood mod - rgblight_effect_rainbow_mood(rgblight_config.mode - 6); - } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { - // mode = 9 to 14, rainbow swirl mode - rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); - } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { - // mode = 15 to 20, snake mode - rgblight_effect_snake(rgblight_config.mode - 15); - } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { - // mode = 21 to 23, knight mode - rgblight_effect_knight(rgblight_config.mode - 21); +void rgblight_task(void) { + if (rgblight_timer_enabled) { + // mode = 1, static light, do nothing here + if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { + // mode = 2 to 5, breathing mode + rgblight_effect_breathing(rgblight_config.mode - 2); + } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { + // mode = 6 to 8, rainbow mood mod + rgblight_effect_rainbow_mood(rgblight_config.mode - 6); + } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { + // mode = 9 to 14, rainbow swirl mode + rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); + } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { + // mode = 15 to 20, snake mode + rgblight_effect_snake(rgblight_config.mode - 15); + } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { + // mode = 21 to 23, knight mode + rgblight_effect_knight(rgblight_config.mode - 21); + } } } @@ -449,7 +469,7 @@ void rgblight_effect_rainbow_swirl(uint8_t interval) { last_timer = timer_read(); for (i = 0; i < RGBLED_NUM; i++) { hue = (360 / RGBLED_NUM * i + current_hue) % 360; - sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); @@ -486,7 +506,7 @@ void rgblight_effect_snake(uint8_t interval) { k = k + RGBLED_NUM; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); } } } @@ -506,7 +526,7 @@ void rgblight_effect_knight(uint8_t interval) { static uint16_t last_timer = 0; uint8_t i, j, cur; int8_t k; - struct cRGB preled[RGBLED_NUM]; + LED_TYPE preled[RGBLED_NUM]; static int8_t increment = -1; if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) { return; @@ -525,7 +545,7 @@ void rgblight_effect_knight(uint8_t interval) { k = RGBLED_NUM - 1; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&preled[i]); } } } diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 17f04ffcf..a3673348e 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,8 +1,7 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H - -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS #define RGBLIGHT_MODES 23 #else #define RGBLIGHT_MODES 1 @@ -34,6 +33,7 @@ #endif #define RGBLED_TIMER_TOP F_CPU/(256*64) +// #define RGBLED_TIMER_TOP 0xFF10 #include <stdint.h> #include <stdbool.h> @@ -61,6 +61,7 @@ void rgblight_init(void); void rgblight_increase(void); void rgblight_decrease(void); void rgblight_toggle(void); +void rgblight_enable(void); void rgblight_step(void); void rgblight_mode(uint8_t mode); void rgblight_set(void); @@ -78,10 +79,13 @@ void eeconfig_update_rgblight(uint32_t val); void eeconfig_update_rgblight_default(void); void eeconfig_debug_rgblight(void); -void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1); -void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1); +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val); + +void rgblight_task(void); + void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); @@ -1136,12 +1136,12 @@ For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring RGBLIGHT_ENABLE = yes -In order to use the underglow timer functions, you need to have `#define RGBLIGHT_TIMER` in your `config.h`, and have audio disabled (`AUDIO_ENABLE = no` in your Makefile). +In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`. Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default: #define RGB_DI_PIN F4 // The pin your RGB strip is wired to - #define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) + #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 01c0e45b0..35739e321 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -51,6 +51,7 @@ #include "descriptor.h" #include "lufa.h" +#include "quantum.h" #ifdef NKRO_ENABLE #include "keycode_config.h" @@ -71,6 +72,10 @@ #include "virtser.h" #endif +#ifdef RGB_MIDI + #include "rgblight.h" +#endif + uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -1039,11 +1044,16 @@ int main(void) } #endif + keyboard_task(); + #ifdef MIDI_ENABLE midi_device_process(&midi_device); // MIDI_Task(); #endif - keyboard_task(); + +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif #ifdef VIRTSER_ENABLE virtser_task(); @@ -1077,15 +1087,232 @@ void fallthrough_callback(MidiDevice * device, #endif } +#ifdef RGB_MIDI + rgblight_config_t rgblight_config; +#endif + void cc_callback(MidiDevice * device, uint8_t chan, uint8_t num, uint8_t val) { //sending it back on the next channel - midi_send_cc(device, (chan + 1) % 16, num, val); + // midi_send_cc(device, (chan + 1) % 16, num, val); + #ifdef RGB_MIDI + rgblight_config.raw = eeconfig_read_rgblight(); + switch (num) { + case 14: + rgblight_config.hue = val * 360 / 127; + break; + case 15: + rgblight_config.sat = val << 1; + break; + case 16: + rgblight_config.val = val << 1; + break; + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + #endif } -void sysex_callback(MidiDevice * device, - uint16_t start, uint8_t length, uint8_t * data) { - for (int i = 0; i < length; i++) - midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); +void send_dword(uint32_t number) { + uint16_t word = (number >> 16); + send_word(word); + send_word(number & 0xFFFFUL); +} + +void send_word(uint16_t number) { + uint8_t byte = number >> 8; + send_byte(byte); + send_byte(number & 0xFF); +} + +void send_byte(uint8_t number) { + uint8_t nibble = number >> 4; + send_nibble(nibble); + send_nibble(number & 0xF); +} + +void send_nibble(uint8_t number) { + switch (number) { + case 0: + register_code(KC_0); + unregister_code(KC_0); + break; + case 1 ... 9: + register_code(KC_1 + (number - 1)); + unregister_code(KC_1 + (number - 1)); + break; + case 0xA ... 0xF: + register_code(KC_A + (number - 0xA)); + unregister_code(KC_A + (number - 0xA)); + break; + } +} + +uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; + +void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { + // for (int i = 0; i < length; i++) + // midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); + // if (start == 0x27) { + // SEND_STRING("\n"); + // send_word(start); + // SEND_STRING(": "); + for (uint8_t place = 0; place < length; place++) { + // send_byte(*data); + midi_buffer[start + place] = *data; + if (*data == 0xF7) + sysex_buffer_callback(device, start + place, &midi_buffer); + // SEND_STRING(" "); + data++; + } + // } + +} + +uint32_t decode_uint32_chunk(uint8_t * data) { + uint32_t part1 = *data++; + uint32_t part2 = *data++; + uint32_t part3 = *data++; + uint32_t part4 = *data++; + uint32_t part5 = *data++; + return ((part1 & 0x1FUL) << 28) | (part2 << 21) | (part3 << 14) | (part4 << 7) | part5; +} + +uint32_t decode_uint8_chunk(uint8_t * data) { + uint32_t part4 = *data++; + uint32_t part5 = *data++; + return (part4 << 7) | part5; +} + +void encode_uint32_chunk(uint32_t data, uint8_t * pointer) { + *pointer++ = (data >> 28) & 0x7F; + *pointer++ = (data >> 21) & 0x7F; + *pointer++ = (data >> 14) & 0x7F; + *pointer++ = (data >> 7) & 0x7F; + *pointer++ = (data) & 0x7F; } + +void encode_uint8_chunk(uint8_t data, uint8_t * pointer) { + *pointer++ = (data >> 7) & 0x7F; + *pointer++ = (data) & 0x7F; +} + +void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { + uint8_t * pointer_copy = data; + + if (*data++ != 0xF0) + return + data++; + data++; + data++; + data++; + + switch (*data++) { + case 0x07: ; // Quantum action + break; + case 0x08: ; // Keyboard acion + break; + case 0x09: ; // User action + break; + case 0x12: ; // Set info on keyboard + switch (*data++) { + case 0x02: ; // set default layer + uint8_t default_layer = decode_uint8_chunk(data); + eeconfig_update_default_layer(default_layer); + default_layer_set((uint32_t)default_layer); + break; + case 0x08: ; // set keymap options + uint8_t keymap_options = decode_uint8_chunk(data); + eeconfig_update_keymap(keymap_options); + break; + } + break; + case 0x13: ; // Get info from keyboard + switch (*data++) { + case 0x00: ; // Handshake + send_bytes_sysex(0x00, NULL, 0); + break; + case 0x01: ; // Get debug state + uint8_t debug[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEBUG), &debug); + send_bytes_sysex(0x01, &debug, 2); + break; + case 0x02: ; // Get default layer + uint8_t default_layer[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEFAULT_LAYER), &default_layer); + send_bytes_sysex(0x02, &default_layer, 2); + break; + #ifdef AUDIO_ENABLE + case 0x03: ; // Get backlight state + uint8_t audio[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_AUDIO), &audio); + send_bytes_sysex(0x03, &audio, 2); + #endif + case 0x04: ; // Get layer state + uint8_t layers[5]; + encode_uint32_chunk(layer_state, &layers); + send_bytes_sysex(0x04, &layers, 5); + break; + #ifdef BACKLIGHT_ENABLE + case 0x06: ; // Get backlight state + uint8_t backlight[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_BACKLIGHT), &backlight); + send_bytes_sysex(0x06, &backlight, 2); + #endif + #ifdef RGBLIGHT_ENABLE + case 0x07: ; // Get rgblight state + uint8_t rgblight[2]; + encode_uint32_chunk(eeprom_read_dword(EECONFIG_RGBLIGHT), &rgblight); + send_bytes_sysex(0x07, &rgblight, 5); + #endif + case 0x08: ; // Keymap options + uint8_t keymap_options[2]; + encode_uint8_chunk(eeconfig_read_keymap(), &keymap_options); + send_bytes_sysex(0x08, &keymap_options, 2); + break; + } + break; + #ifdef RGBLIGHT_ENABLE + case 0x27: ; // RGB LED functions + switch (*data++) { + case 0x00: ; // Update HSV + uint32_t hsv = decode_uint32_chunk(data); + rgblight_sethsv(((hsv >> 16) & 0xFFFF) % 360, (hsv >> 8) & 0xFF, hsv & 0xFF); + break; + case 0x01: ; // Update RGB + break; + case 0x02: ; // Update mode + uint8_t rgb_mode = decode_uint8_chunk(data); + rgblight_mode(rgb_mode); + break; + } + break; + #endif + } + + // SEND_STRING("\nDATA:\n"); + // while (*pointer_copy != 0xF7) { + // send_byte(*pointer_copy++); + // SEND_STRING(" "); + // } + +} + +void send_unicode_midi(uint32_t unicode) { + uint8_t chunk[5]; + encode_uint32_chunk(unicode, &chunk); + send_bytes_sysex(0x05, &chunk, 5); +} + +void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length) { + uint8_t * array = malloc(sizeof(uint8_t) * (length + 6)); + array[0] = 0xF0; + array[1] = 0x00; + array[2] = 0x00; + array[3] = 0x00; + array[4] = type; + array[length + 5] = 0xF7; + memcpy(array + 5, bytes, length); + midi_send_array(&midi_device, length + 6, array); +} + #endif diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index aad08d640..198964f90 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -68,8 +68,18 @@ typedef struct { } __attribute__ ((packed)) report_extra_t; #ifdef MIDI_ENABLE -void MIDI_Task(void); -MidiDevice midi_device; + #define MIDI_SYSEX_BUFFER 16 + void MIDI_Task(void); + MidiDevice midi_device; + + void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data); + uint32_t decode_uint32_chunk(uint8_t * data); + uint32_t decode_uint8_chunk(uint8_t * data); + void encode_uint32_chunk(uint32_t data, uint8_t * pointer); + void encode_uint8_chunk(uint8_t data, uint8_t * pointer); + void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data); + void send_unicode_midi(uint32_t unicode); + void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length); #endif // #if LUFA_VERSION_INTEGER < 0x120730 |