diff options
| -rw-r--r-- | keyboard/hhkb_rn42/Makefile | 142 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/config.h | 67 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/keymap_common.c | 33 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/keymap_common.h | 57 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/keymap_hasu.c | 280 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/led.c | 33 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/main.c | 67 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/matrix.c | 288 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/rn42.c | 37 | ||||
| -rw-r--r-- | keyboard/hhkb_rn42/rn42.h | 6 |
10 files changed, 1010 insertions, 0 deletions
diff --git a/keyboard/hhkb_rn42/Makefile b/keyboard/hhkb_rn42/Makefile new file mode 100644 index 000000000..7b3b993b7 --- /dev/null +++ b/keyboard/hhkb_rn42/Makefile @@ -0,0 +1,142 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = hhkb_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + + +# List C source files here. (C dependencies are automatically generated.) +SRC += keymap_common.c \ + matrix.c \ + led.c \ + main.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_hhkb.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name +# PJRC Teensy++ 2.0 +#MCU = at90usb1286 +# TMK Alt Controller or PJRC Teensy 2.0 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 (TMK Alt Controller) +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover +KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION +debug-on: all + +debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT +debug-off: all diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb_rn42/config.h new file mode 100644 index 000000000..a8f76ae6b --- /dev/null +++ b/keyboard/hhkb_rn42/config.h @@ -0,0 +1,67 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xCAFE +#define DEVICE_VER 0x0104 +#define MANUFACTURER t.m.k. +#define PRODUCT HHKB mod +#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod + + +/* matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + + +/* key combination for command */ +#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + + +/* period of tapping(ms) */ +#define TAPPING_TERM 300 +/* tap count needed for toggling a feature */ +#define TAPPING_TOGGLE 5 +/* Oneshot timeout(ms) */ +#define ONESHOT_TIMEOUT 300 + +/* Boot Magic salt key: Space */ +#define BOOTMAGIC_KEY_SALT KC_FN6 + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/hhkb_rn42/keymap_common.c b/keyboard/hhkb_rn42/keymap_common.c new file mode 100644 index 000000000..e938fb627 --- /dev/null +++ b/keyboard/hhkb_rn42/keymap_common.c @@ -0,0 +1,33 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include "action.h" +#include <avr/pgmspace.h> +#include "keymap_common.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} diff --git a/keyboard/hhkb_rn42/keymap_common.h b/keyboard/hhkb_rn42/keymap_common.h new file mode 100644 index 000000000..ec922a322 --- /dev/null +++ b/keyboard/hhkb_rn42/keymap_common.h @@ -0,0 +1,57 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include <stdint.h> +#include <stdbool.h> +#include "keycode.h" +#include "action.h" +#include "action_code.h" +#include "action_layer.h" +#include "action_macro.h" +#include "action_util.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + + +#define KEYMAP( \ + K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \ + K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \ + K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \ + K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \ + K35, K36, K37, K57, K56 \ +) \ +{ \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \ +} + +#endif diff --git a/keyboard/hhkb_rn42/keymap_hasu.c b/keyboard/hhkb_rn42/keymap_hasu.c new file mode 100644 index 000000000..e3d951bea --- /dev/null +++ b/keyboard/hhkb_rn42/keymap_hasu.c @@ -0,0 +1,280 @@ +/* + * Hasu: my personal keymap + */ +#include "keymap_common.h" + + +#ifdef KEYMAP_SECTION_ENABLE +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { +#else +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { +#endif + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs| + * |-----------------------------------------------------------| + * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Fn6 | + * |-----------------------------------------------------------| + * |Fn7 | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |Fn1| + * `-----------------------------------------------------------' + * |Gui|Alt | Fn4 |Fn5 |Gui| + * `-------------------------------------------' + */ + [0] = \ + KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ + LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \ + FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ + LGUI,LALT, FN4, FN5, RGUI), + + /* Layer 1: HHKB mode[HHKB Fn] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| + * |-----------------------------------------------------------| + * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + * |-----------------------------------------------------------| + * |Shift | | | | | | +| -|End|PgD|Dow|Shift | | + * `-----------------------------------------------------------' + * |Gui|Alt | Space |Alt |Gui| + * `-------------------------------------------' + */ + [1] = \ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \ + LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ + LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \ + LGUI,LALT, SPC, RALT,RGUI), + + /* Layer 2: Vi mode[Slash] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| + * |-----------------------------------------------------------| + * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | + * `-----------------------------------------------------------' + * |Gui|Alt | Space |Alt |Gui| + * `-------------------------------------------' + */ + [2] = \ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \ + LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \ + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS,RSFT,NO, \ + LGUI,LALT, SPC, RALT,RGUI), + + /* Layer 3: Mouse mode(IJKL)[Semicolon] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| + * |-----------------------------------------------------------| + * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Mb1 |Fn |Fn | + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8 + */ + [3] = \ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \ + LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \ + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ + LGUI,LALT, BTN1, TRNS,TRNS), + + /* Layer 5: Mouse mode(IJKL)[Space] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| + * |-----------------------------------------------------------| + * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Mb1 |Fn |Fn | + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8 + */ + [4] = \ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \ + LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \ + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ + LGUI,LALT, TRNS, TRNS,TRNS), + +#if 0 + /* Layer 3: Mouse mode(HJKL)[Semicolon] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|MwU|MwR| | | |Backs| + * |-----------------------------------------------------------| + * |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Mb1 |Alt |Fn0| + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + TAB, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, \ + LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \ + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,SLSH,RSFT,NO, \ + LGUI,LALT, BTN1, RALT,TRNS), + + /* Layer4: Mouse mode(HJKL)[Space] + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + * |-----------------------------------------------------------| + * |Tab | | | | | |MwL|MwD|MwU|MwR| |Wbk|Wfr|Alt-T| + * |-----------------------------------------------------------| + * |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return | + * |-----------------------------------------------------------| + * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Fn0 |Alt |Fn0| + * `--------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + FN8, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, WBAK,WFWD,FN8, \ + LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \ + LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \ + LGUI,LALT, TRNS, RALT,RGUI), +#endif +#if 0 + /* Layer x: Matias half-qwerty keyboard style[Space] + * ,-----------------------------------------------------------. + * | -| 0| 9| 8| 7| 6| 5| 4| 3| 2| 1| | | |Esc| + * |-----------------------------------------------------------| + * |Backs| P| O| I| U| Y| T| R| E| W| Q| | |Tab | + * |-----------------------------------------------------------| + * |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control | + * |-----------------------------------------------------------| + * |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | | + * `-----------------------------------------------------------' + * |Gui |Alt | Fn0 |Alt |Gui| + * `--------------------------------------------' + */ + KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, NO, ESC, \ + BSPC,P, O, I, U, Y, T, R, E, W, Q, NO, NO, TAB, \ + LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \ + LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \ + LGUI,LALT, TRNS, RALT,RGUI), +#endif +}; + + + +/* id for user defined functions */ +enum function_id { + LSHIFT_LPAREN, +}; + +enum macro_id { + HELLO, + VOLUP, + ALT_TAB, +}; + + +/* + * Fn action definition + */ +#ifdef KEYMAP_SECTION_ENABLE +const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { +#else +const uint16_t fn_actions[] PROGMEM = { +#endif + [0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used) + [1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps) + [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash* + [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon* + [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space + [5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL) + [6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter + [7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift + [8] = ACTION_MACRO(ALT_TAB), // Application switching + +// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace +// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc +// [x] = ACTION_FUNCTION_TAP(LSHIFT_LPAREN), // Function: LShift with tap '(' +// [x] = ACTION_MACRO(HELLO), // Macro: say hello +// [x] = ACTION_MACRO(VOLUP), // Macro: media key +}; + + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case HELLO: + return (record->event.pressed ? + MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) : + MACRO_NONE ); + case VOLUP: + return (record->event.pressed ? + MACRO( D(VOLU), U(VOLU), END ) : + MACRO_NONE ); + case ALT_TAB: + return (record->event.pressed ? + MACRO( D(LALT), D(TAB), END ) : + MACRO( U(TAB), END )); + } + return MACRO_NONE; +} + + + +/* + * user defined action function + */ +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (record->event.pressed) dprint("P"); else dprint("R"); + dprintf("%d", record->tap.count); + if (record->tap.interrupted) dprint("i"); + dprint("\n"); + + switch (id) { + case LSHIFT_LPAREN: + // Shift parentheses example: LShft + tap '(' + // http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses + // http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899 + if (record->event.pressed) { + if (record->tap.count > 0 && !record->tap.interrupted) { + if (record->tap.interrupted) { + dprint("tap interrupted\n"); + register_mods(MOD_BIT(KC_LSHIFT)); + } + } else { + register_mods(MOD_BIT(KC_LSHIFT)); + } + } else { + if (record->tap.count > 0 && !(record->tap.interrupted)) { + add_weak_mods(MOD_BIT(KC_LSHIFT)); + send_keyboard_report(); + register_code(KC_9); + unregister_code(KC_9); + del_weak_mods(MOD_BIT(KC_LSHIFT)); + send_keyboard_report(); + record->tap.count = 0; // ad hoc: cancel tap + } else { + unregister_mods(MOD_BIT(KC_LSHIFT)); + } + } + break; + } +} diff --git a/keyboard/hhkb_rn42/led.c b/keyboard/hhkb_rn42/led.c new file mode 100644 index 000000000..8a08fe27f --- /dev/null +++ b/keyboard/hhkb_rn42/led.c @@ -0,0 +1,33 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +/* HHKB has no LEDs */ +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + DDRD |= (1<<6); + PORTD |= (1<<6); + } else { + DDRD |= (1<<6); + PORTD &= ~(1<<6); + } +} diff --git a/keyboard/hhkb_rn42/main.c b/keyboard/hhkb_rn42/main.c new file mode 100644 index 000000000..b6a8456f7 --- /dev/null +++ b/keyboard/hhkb_rn42/main.c @@ -0,0 +1,67 @@ +#include <avr/io.h> +#include <avr/power.h> +#include <avr/wdt.h> +#include "lufa.h" +#include "print.h" +#include "sendchar.h" + + +static void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + // Leonardo needs. Without this USB device is not recognized. + USB_Disable(); + + USB_Init(); + + // for Console_Task + USB_Device_EnableSOFEvents(); + print_set_sendchar(sendchar); +} + +int main(void) __attribute__ ((weak)); +int main(void) +{ + SetupHardware(); + sei(); + + /* wait for USB startup & debug output */ + while (USB_DeviceState != DEVICE_STATE_Configured) { +#if defined(INTERRUPT_CONTROL_ENDPOINT) + ; +#else + USB_USBTask(); +#endif + } + print("USB configured.\n"); + + /* init modules */ + keyboard_init(); + host_set_driver(&lufa_driver); +#ifdef SLEEP_LED_ENABLE + sleep_led_init(); +#endif + + print("Keyboard start.\n"); + while (1) { + while (USB_DeviceState == DEVICE_STATE_Suspended) { + suspend_power_down(); + if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { + USB_Device_SendRemoteWakeup(); + } + } + + keyboard_task(); + +#if !defined(INTERRUPT_CONTROL_ENDPOINT) + USB_USBTask(); +#endif + } +} + diff --git a/keyboard/hhkb_rn42/matrix.c b/keyboard/hhkb_rn42/matrix.c new file mode 100644 index 000000000..d0731ef1f --- /dev/null +++ b/keyboard/hhkb_rn42/matrix.c @@ -0,0 +1,288 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "timer.h" +#include "matrix.h" + + +// Timer resolution check +#if (1000000/TIMER_RAW_FREQ > 20) +# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." +#endif + + +// matrix state buffer(1:on, 0:off) +static matrix_row_t *matrix; +static matrix_row_t *matrix_prev; +static matrix_row_t _matrix0[MATRIX_ROWS]; +static matrix_row_t _matrix1[MATRIX_ROWS]; + + +// Matrix I/O ports +// +// row: HC4051[A,B,C] selects scan row0-7 +// col: LS145[A,B,C,D] selects scan col0-7 and enable(D) +// key: on: 0/off: 1 +// prev: unknown: output previous key state(negated)? + +#if defined(__AVR_AT90USB1286__) +// Ports for Teensy++ +// row: PB0-2 +// col: PB3-5,6 +// key: PE6(pull-uped) +// prev: PE7 +#define KEY_INIT() do { \ + DDRB |= 0x7F; \ + DDRE |= (1<<7); \ + DDRE &= ~(1<<6); \ + PORTE |= (1<<6); \ +} while (0) +#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ + (((COL) & 0x07)<<3) | \ + ((ROW) & 0x07)) +#define KEY_ENABLE() (PORTB &= ~(1<<6)) +#define KEY_UNABLE() (PORTB |= (1<<6)) +#define KEY_STATE() (PINE & (1<<6)) +#define KEY_PREV_ON() (PORTE |= (1<<7)) +#define KEY_PREV_OFF() (PORTE &= ~(1<<7)) +#define KEY_POWER_ON() +#define KEY_POWER_OFF() + +#elif defined(__AVR_ATmega32U4__) +// Ports for my designed Alt Controller PCB +// row: PB0-2 +// col: PB3-5,6 +// key: PD7(pull-uped) +// prev: PB7 +// power: PD4(L:off/H:on) +#define KEY_INIT() do { \ + DDRB = 0xFF; \ + PORTB = 0x00; \ + DDRD &= ~0x80; \ + PORTD |= 0x80; \ + /* keyswitch board power on */ \ + DDRD |= (1<<4); \ + PORTD |= (1<<4); \ + KEY_UNABLE(); \ + KEY_PREV_OFF(); \ +} while (0) +#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ + (((COL) & 0x07)<<3) | \ + ((ROW) & 0x07)) +#define KEY_ENABLE() (PORTB &= ~(1<<6)) +#define KEY_UNABLE() (PORTB |= (1<<6)) +#define KEY_STATE() (PIND & (1<<7)) +#define KEY_PREV_ON() (PORTB |= (1<<7)) +#define KEY_PREV_OFF() (PORTB &= ~(1<<7)) +#define KEY_POWER_ON() +#define KEY_POWER_OFF() +/* +#define KEY_POWER_ON() do { \ + KEY_INIT(); \ + PORTD |= (1<<4); \ + _delay_ms(1); \ +} while (0) +#define KEY_POWER_OFF() do { \ + PORTD &= ~(1<<4); \ + DDRB &= ~0xFF; \ + PORTB &= ~0xFF; \ + DDRB &= ~0x80; \ + PORTB &= ~0x80; \ +} while (0) +*/ + + +#elif defined(__AVR_ATmega328P__) +// Ports for V-USB +// key: PB0(pull-uped) +// prev: PB1 +// row: PB2-4 +// col: PC0-2,3 +// power: PB5(Low:on/Hi-z:off) +#define KEY_INIT() do { \ + DDRB |= 0x3E; \ + DDRB &= ~(1<<0); \ + PORTB |= 1<<0; \ + DDRC |= 0x0F; \ + KEY_UNABLE(); \ + KEY_PREV_OFF(); \ +} while (0) +#define KEY_SELECT(ROW, COL) do { \ + PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ + PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ +} while (0) +#define KEY_ENABLE() (PORTC &= ~(1<<3)) +#define KEY_UNABLE() (PORTC |= (1<<3)) +#define KEY_STATE() (PINB & (1<<0)) +#define KEY_PREV_ON() (PORTB |= (1<<1)) +#define KEY_PREV_OFF() (PORTB &= ~(1<<1)) +// Power supply switching +#define KEY_POWER_ON() do { \ + KEY_INIT(); \ + PORTB &= ~(1<<5); \ + _delay_ms(1); \ +} while (0) +#define KEY_POWER_OFF() do { \ + DDRB &= ~0x3F; \ + PORTB &= ~0x3F; \ + DDRC &= ~0x0F; \ + PORTC &= ~0x0F; \ +} while (0) + +#else +# error "define code for matrix scan" +#endif + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ +#ifdef DEBUG + debug_enable = true; + debug_keyboard = true; +#endif + + KEY_INIT(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; + matrix = _matrix0; + matrix_prev = _matrix1; +} + +uint8_t matrix_scan(void) +{ + uint8_t *tmp; + + tmp = matrix_prev; + matrix_prev = matrix; + matrix = tmp; + + KEY_POWER_ON(); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + KEY_SELECT(row, col); + _delay_us(40); + + // Not sure this is needed. This just emulates HHKB controller's behaviour. + if (matrix_prev[row] & (1<<col)) { + KEY_PREV_ON(); + } + _delay_us(7); + + // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE. + // If V-USB interrupts in this section we could lose 40us or so + // and would read invalid value from KEY_STATE. + uint8_t last = TIMER_RAW; + + KEY_ENABLE(); + + // Wait for KEY_STATE outputs its value. + // 1us was ok on one HHKB, but not worked on another. + // no wait doesn't work on Teensy++ with pro(1us works) + // no wait does work on tmk PCB(8MHz) with pro2 + // 1us wait does work on both of above + // 1us wait doesn't work on tmk(16MHz) + // 5us wait does work on tmk(16MHz) + // 5us wait does work on tmk(16MHz/2) + // 5us wait does work on tmk(8MHz) + // 10us wait does work on Teensy++ with pro + // 10us wait does work on 328p+iwrap with pro + // 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan) + _delay_us(5); + + if (KEY_STATE()) { + matrix[row] &= ~(1<<col); + } else { + matrix[row] |= (1<<col); + } + + // Ignore if this code region execution time elapses more than 20us. + // MEMO: 20[us] * (TIMER_RAW_FREQ / 1000000)[count per us] + // MEMO: then change above using this rule: a/(b/c) = a*1/(b/c) = a*(c/b) + if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) { + matrix[row] = matrix_prev[row]; + } + + KEY_PREV_OFF(); + KEY_UNABLE(); + // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE. + // This takes 25us or more to make sure KEY_STATE returns to idle state. + _delay_us(150); + } + } + KEY_POWER_OFF(); + return 1; +} + +bool matrix_is_modified(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + if (matrix[i] != matrix_prev[i]) + return true; + } + return false; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row))); + } +} diff --git a/keyboard/hhkb_rn42/rn42.c b/keyboard/hhkb_rn42/rn42.c new file mode 100644 index 000000000..bbf05a392 --- /dev/null +++ b/keyboard/hhkb_rn42/rn42.c @@ -0,0 +1,37 @@ +#include "host.h" +#include "host_driver.h" +#include "rn42.h" + + +/* Host driver */ +static uint8_t keyboard_leds(void); +static void send_keyboard(report_keyboard_t *report); +static void send_mouse(report_mouse_t *report); +static void send_system(uint16_t data); +static void send_consumer(uint16_t data); + +host_driver_t rn42_driver = { + keyboard_leds, + send_keyboard, + send_mouse, + send_system, + send_consumer +}; + +static uint8_t keyboard_leds(void) { return 0; } + +static void send_keyboard(report_keyboard_t *report) +{ +} + +static void send_mouse(report_mouse_t *report) +{ +} + +static void send_system(uint16_t data) +{ +} + +static void send_consumer(uint16_t data) +{ +} diff --git a/keyboard/hhkb_rn42/rn42.h b/keyboard/hhkb_rn42/rn42.h new file mode 100644 index 000000000..57ae17ba1 --- /dev/null +++ b/keyboard/hhkb_rn42/rn42.h @@ -0,0 +1,6 @@ +#ifndef RN42_H +#define RN42_H + +host_driver_t rn42_driver; + +#endif |