diff options
51 files changed, 5532 insertions, 296 deletions
diff --git a/common_features.mk b/common_features.mk index 8f53a82aa..bd88e04d6 100644 --- a/common_features.mk +++ b/common_features.mk @@ -225,6 +225,13 @@ ifeq ($(strip $(ENCODER_ENABLE)), yes) OPT_DEFS += -DENCODER_ENABLE endif +ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L) + COMMON_VPATH += $(DRIVER_PATH)/haptic + SRC += DRV2605L.c + SRC += i2c_master.c + OPT_DEFS += -DDRV2605L +endif + ifeq ($(strip $(HD44780_ENABLE)), yes) SRC += drivers/avr/hd44780.c OPT_DEFS += -DHD44780_ENABLE @@ -240,6 +247,8 @@ ifeq ($(strip $(LEADER_ENABLE)), yes) OPT_DEFS += -DLEADER_ENABLE endif +include $(DRIVER_PATH)/qwiic/qwiic.mk + QUANTUM_SRC:= \ $(QUANTUM_DIR)/quantum.c \ $(QUANTUM_DIR)/keymap_common.c \ diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index de5843839..ab962ea95 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -32,7 +32,7 @@ static uint8_t i2c_address; -// This configures the I2C clock to 400Mhz assuming a 72Mhz clock +// This configures the I2C clock to 400khz assuming a 72Mhz clock // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html static const I2CConfig i2cconfig = { STM32_TIMINGR_PRESC(15U) | @@ -45,10 +45,14 @@ static const I2CConfig i2cconfig = { __attribute__ ((weak)) void i2c_init(void) { - setPinInput(B6); // Try releasing special pins for a short time - setPinInput(B7); - chThdSleepMilliseconds(10); + //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); + + // Try releasing special pins for a short time + palSetPadMode(GPIOB, 6, PAL_MODE_INPUT); + palSetPadMode(GPIOB, 7, PAL_MODE_INPUT); + chThdSleepMilliseconds(10); + palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h index 591fa7f77..392760328 100644 --- a/drivers/arm/i2c_master.h +++ b/drivers/arm/i2c_master.h @@ -34,6 +34,7 @@ void i2c_init(void); uint8_t i2c_start(uint8_t address); uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); +uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length); uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout); uint8_t i2c_stop(uint16_t timeout); diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c new file mode 100644 index 000000000..97ca292b9 --- /dev/null +++ b/drivers/haptic/DRV2605L.c @@ -0,0 +1,129 @@ +/* Copyright 2018 ishtob + * Driver for DRV2605L written for QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "DRV2605L.h" +#include "print.h" +#include <stdlib.h> +#include <stdio.h> +#include <math.h> + + +uint8_t DRV2605L_transfer_buffer[20]; +uint8_t DRV2605L_tx_register[0]; +uint8_t DRV2605L_read_buffer[0]; +uint8_t DRV2605L_read_register; + + +void DRV_write(uint8_t drv_register, uint8_t settings) { + DRV2605L_transfer_buffer[0] = drv_register; + DRV2605L_transfer_buffer[1] = settings; + i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100); +} + +uint8_t DRV_read(uint8_t regaddress) { + DRV2605L_tx_register[0] = regaddress; + if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1, + DRV2605L_tx_register, 1, + DRV2605L_read_buffer, 1 +)){ + printf("err reading reg \n"); + } + DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0]; +return DRV2605L_read_register; +} + +void DRV_init(void) +{ + i2c_init(); + i2c_start(DRV2605L_BASE_ADDRESS); + + /* 0x07 sets DRV2605 into calibration mode */ + DRV_write(DRV_MODE,0x07); + +// DRV_write(DRV_FEEDBACK_CTRL,0xB6); + + #if FB_ERM_LRA == 0 + /* ERM settings */ + DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000); + #if ERM_OPEN_LOOP == 0 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003))); + #elif ERM_OPEN_LOOP == 1 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196)); + #endif + #elif FB_ERM_LRA == 1 + DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071))); + #if LRA_OPEN_LOOP == 0 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133))); + #elif LRA_OPEN_LOOP == 1 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196)); + #endif + #endif + + DRVREG_FBR FB_SET; + FB_SET.Bits.ERM_LRA = FB_ERM_LRA; + FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR; + FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN; + FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/ + DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte); + DRVREG_CTRL1 C1_SET; + C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME; + C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE; + C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST; + DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte); + DRVREG_CTRL2 C2_SET; + C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT; + C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB; + C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME; + C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME; + C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME; + DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte); + DRVREG_CTRL3 C3_SET; + C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP; + C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG; + C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE; + C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO; + C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS; + C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP; + C3_SET.Bits.C3_NG_THRESH = NG_THRESH; + DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte); + DRVREG_CTRL4 C4_SET; + C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME; + C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME; + DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte); + DRV_write(DRV_LIB_SELECTION,LIB_SELECTION); + //start autocalibration + DRV_write(DRV_GO, 0x01); + + /* 0x00 sets DRV2605 out of standby and to use internal trigger + * 0x01 sets DRV2605 out of standby and to use external trigger */ + DRV_write(DRV_MODE,0x00); + + /* 0x06: LRA library */ + DRV_write(DRV_WAVEFORM_SEQ_1, 0x01); + + /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF + * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */ + + /* TODO: setup auto-calibration as part of initiation */ + +} + +void DRV_pulse(uint8_t sequence) +{ + DRV_write(DRV_GO, 0x00); + DRV_write(DRV_WAVEFORM_SEQ_1, sequence); + DRV_write(DRV_GO, 0x01); +}
\ No newline at end of file diff --git a/drivers/haptic/DRV2605L.h b/drivers/haptic/DRV2605L.h new file mode 100644 index 000000000..de9d294e9 --- /dev/null +++ b/drivers/haptic/DRV2605L.h @@ -0,0 +1,394 @@ +/* Copyright 2018 ishtob + * Driver for DRV2605L written for QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "i2c_master.h" + +/* Initialization settings + + * Feedback Control Settings */ +#ifndef FB_ERM_LRA +#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ +#endif +#ifndef FB_BRAKEFACTOR +#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#endif +#ifndef FB_LOOPGAIN +#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ +#endif + +#ifndef RATED_VOLTAGE +#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */ +#ifndef V_PEAK +#define V_PEAK 2.8 +#endif +#endif + +/* LRA specific settings */ +#if FB_ERM_LRA == 1 +#ifndef V_RMS +#define V_RMS 2.0 +#endif +#ifndef V_PEAK +#define V_PEAK 2.1 +#endif +#ifndef F_LRA +#define F_LRA 205 +#endif +#endif + +/* Library Selection */ +#ifndef LIB_SELECTION +#if FB_ERM_LRA == 1 +#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ +#else +#define LIB_SELECTION 1 +#endif +#endif + +/* Control 1 register settings */ +#ifndef DRIVE_TIME +#define DRIVE_TIME 25 +#endif +#ifndef AC_COUPLE +#define AC_COUPLE 0 +#endif +#ifndef STARTUP_BOOST +#define STARTUP_BOOST 1 +#endif + +/* Control 2 Settings */ +#ifndef BIDIR_INPUT +#define BIDIR_INPUT 1 +#endif +#ifndef BRAKE_STAB +#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ +#endif +#ifndef SAMPLE_TIME +#define SAMPLE_TIME 3 +#endif +#ifndef BLANKING_TIME +#define BLANKING_TIME 1 +#endif +#ifndef IDISS_TIME +#define IDISS_TIME 1 +#endif + +/* Control 3 settings */ +#ifndef NG_THRESH +#define NG_THRESH 2 +#endif +#ifndef ERM_OPEN_LOOP +#define ERM_OPEN_LOOP 1 +#endif +#ifndef SUPPLY_COMP_DIS +#define SUPPLY_COMP_DIS 0 +#endif +#ifndef DATA_FORMAT_RTO +#define DATA_FORMAT_RTO 0 +#endif +#ifndef LRA_DRIVE_MODE +#define LRA_DRIVE_MODE 0 +#endif +#ifndef N_PWM_ANALOG +#define N_PWM_ANALOG 0 +#endif +#ifndef LRA_OPEN_LOOP +#define LRA_OPEN_LOOP 0 +#endif + +/* Control 4 settings */ +#ifndef ZC_DET_TIME +#define ZC_DET_TIME 0 +#endif +#ifndef AUTO_CAL_TIME +#define AUTO_CAL_TIME 3 +#endif + +/* register defines -------------------------------------------------------- */ +#define DRV2605L_BASE_ADDRESS 0x5A /* DRV2605L Base address */ +#define DRV_STATUS 0x00 +#define DRV_MODE 0x01 +#define DRV_RTP_INPUT 0x02 +#define DRV_LIB_SELECTION 0x03 +#define DRV_WAVEFORM_SEQ_1 0x04 +#define DRV_WAVEFORM_SEQ_2 0x05 +#define DRV_WAVEFORM_SEQ_3 0x06 +#define DRV_WAVEFORM_SEQ_4 0x07 +#define DRV_WAVEFORM_SEQ_5 0x08 +#define DRV_WAVEFORM_SEQ_6 0x09 +#define DRV_WAVEFORM_SEQ_7 0x0A +#define DRV_WAVEFORM_SEQ_8 0x0B +#define DRV_GO 0x0C +#define DRV_OVERDRIVE_TIME_OFFSET 0x0D +#define DRV_SUSTAIN_TIME_OFFSET_P 0x0E +#define DRV_SUSTAIN_TIME_OFFSET_N 0x0F +#define DRV_BRAKE_TIME_OFFSET 0x10 +#define DRV_AUDIO_2_VIBE_CTRL 0x11 +#define DRV_AUDIO_2_VIBE_MIN_IN 0x12 +#define DRV_AUDIO_2_VIBE_MAX_IN 0x13 +#define DRV_AUDIO_2_VIBE_MIN_OUTDRV 0x14 +#define DRV_AUDIO_2_VIBE_MAX_OUTDRV 0x15 +#define DRV_RATED_VOLT 0x16 +#define DRV_OVERDRIVE_CLAMP_VOLT 0x17 +#define DRV_AUTO_CALIB_COMP_RESULT 0x18 +#define DRV_AUTO_CALIB_BEMF_RESULT 0x19 +#define DRV_FEEDBACK_CTRL 0x1A +#define DRV_CTRL_1 0x1B +#define DRV_CTRL_2 0x1C +#define DRV_CTRL_3 0x1D +#define DRV_CTRL_4 0x1E +#define DRV_CTRL_5 0x1F +#define DRV_OPEN_LOOP_PERIOD 0x20 +#define DRV_VBAT_VOLT_MONITOR 0x21 +#define DRV_LRA_RESONANCE_PERIOD 0x22 + +void DRV_init(void); +void DRV_write(const uint8_t drv_register, const uint8_t settings); +uint8_t DRV_read(const uint8_t regaddress); +void DRV_pulse(const uint8_t sequence); + + +typedef enum DRV_EFFECT{ + clear_sequence = 0, + strong_click = 1, + strong_click_60 = 2, + strong_click_30 = 3, + sharp_click = 4, + sharp_click_60 = 5, + sharp_click_30 = 6, + soft_bump = 7, + soft_bump_60 = 8, + soft_bump_30 = 9, + dbl_click = 10, + dbl_click_60 = 11, + trp_click = 12, + soft_fuzz = 13, + strong_buzz = 14, + alert_750ms = 15, + alert_1000ms = 16, + strong_click1 = 17, + strong_click2_80 = 18, + strong_click3_60 = 19, + strong_click4_30 = 20, + medium_click1 = 21, + medium_click2_80 = 22, + medium_click3_60 = 23, + sharp_tick1 = 24, + sharp_tick2_80 = 25, + sharp_tick3_60 = 26, + sh_dblclick_str = 27, + sh_dblclick_str_80 = 28, + sh_dblclick_str_60 = 29, + sh_dblclick_str_30 = 30, + sh_dblclick_med = 31, + sh_dblclick_med_80 = 32, + sh_dblclick_med_60 = 33, + sh_dblsharp_tick = 34, + sh_dblsharp_tick_80 = 35, + sh_dblsharp_tick_60 = 36, + lg_dblclick_str = 37, + lg_dblclick_str_80 = 38, + lg_dblclick_str_60 = 39, + lg_dblclick_str_30 = 40, + lg_dblclick_med = 41, + lg_dblclick_med_80 = 42, + lg_dblclick_med_60 = 43, + lg_dblsharp_tick = 44, + lg_dblsharp_tick_80 = 45, + lg_dblsharp_tick_60 = 46, + buzz = 47, + buzz_80 = 48, + buzz_60 = 49, + buzz_40 = 50, + buzz_20 = 51, + pulsing_strong = 52, + pulsing_strong_80 = 53, + pulsing_medium = 54, + pulsing_medium_80 = 55, + pulsing_sharp = 56, + pulsing_sharp_80 = 57, + transition_click = 58, + transition_click_80 = 59, + transition_click_60 = 60, + transition_click_40 = 61, + transition_click_20 = 62, + transition_click_10 = 63, + transition_hum = 64, + transition_hum_80 = 65, + transition_hum_60 = 66, + transition_hum_40 = 67, + transition_hum_20 = 68, + transition_hum_10 = 69, + transition_rampdown_long_smooth1 = 70, + transition_rampdown_long_smooth2 = 71, + transition_rampdown_med_smooth1 = 72, + transition_rampdown_med_smooth2 = 73, + transition_rampdown_short_smooth1 = 74, + transition_rampdown_short_smooth2 = 75, + transition_rampdown_long_sharp1 = 76, + transition_rampdown_long_sharp2 = 77, + transition_rampdown_med_sharp1 = 78, + transition_rampdown_med_sharp2 = 79, + transition_rampdown_short_sharp1 = 80, + transition_rampdown_short_sharp2 = 81, + transition_rampup_long_smooth1 = 82, + transition_rampup_long_smooth2 = 83, + transition_rampup_med_smooth1 = 84, + transition_rampup_med_smooth2 = 85, + transition_rampup_short_smooth1 = 86, + transition_rampup_short_smooth2 = 87, + transition_rampup_long_sharp1 = 88, + transition_rampup_long_sharp2 = 89, + transition_rampup_med_sharp1 = 90, + transition_rampup_med_sharp2 = 91, + transition_rampup_short_sharp1 = 92, + transition_rampup_short_sharp2 = 93, + transition_rampdown_long_smooth1_50 = 94, + transition_rampdown_long_smooth2_50 = 95, + transition_rampdown_med_smooth1_50 = 96, + transition_rampdown_med_smooth2_50 = 97, + transition_rampdown_short_smooth1_50 = 98, + transition_rampdown_short_smooth2_50 = 99, + transition_rampdown_long_sharp1_50 = 100, + transition_rampdown_long_sharp2_50 = 101, + transition_rampdown_med_sharp1_50 = 102, + transition_rampdown_med_sharp2_50 = 103, + transition_rampdown_short_sharp1_50 = 104, + transition_rampdown_short_sharp2_50 = 105, + transition_rampup_long_smooth1_50 = 106, + transition_rampup_long_smooth2_50 = 107, + transition_rampup_med_smooth1_50 = 108, + transition_rampup_med_smooth2_50 = 109, + transition_rampup_short_smooth1_50 = 110, + transition_rampup_short_smooth2_50 = 111, + transition_rampup_long_sharp1_50 = 112, + transition_rampup_long_sharp2_50 = 113, + transition_rampup_med_sharp1_50 = 114, + transition_rampup_med_sharp2_50 = 115, + transition_rampup_short_sharp1_50 = 116, + transition_rampup_short_sharp2_50 = 117, + long_buzz_for_programmatic_stopping = 118, + smooth_hum1_50 = 119, + smooth_hum2_40 = 120, + smooth_hum3_30 = 121, + smooth_hum4_20 = 122, + smooth_hum5_10 = 123, +} DRV_EFFECT; + +/* Register bit array unions */ + +typedef union DRVREG_STATUS { /* register 0x00 */ + uint8_t Byte; + struct { + uint8_t OC_DETECT :1; /* set to 1 when overcurrent event is detected */ + uint8_t OVER_TEMP :1; /* set to 1 when device exceeds temp threshold */ + uint8_t FB_STS :1; /* set to 1 when feedback controller has timed out */ + /* auto-calibration routine and diagnostic result + * result | auto-calibation | diagnostic | + * 0 | passed | actuator func normal | + * 1 | failed | actuator func fault* | + * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */ + uint8_t DIAG_RESULT :1; + uint8_t :1; + uint8_t DEVICE_ID :3; /* Device IDs 3: DRV2605 4: DRV2604 5: DRV2604L 6: DRV2605L */ + } Bits; +} DRVREG_STATUS; + +typedef union DRVREG_MODE { /* register 0x01 */ + uint8_t Byte; + struct { + uint8_t MODE :3; /* Mode setting */ + uint8_t :3; + uint8_t STANDBY :1; /* 0:standby 1:ready */ + } Bits; +} DRVREG_MODE; + +typedef union DRVREG_WAIT { + uint8_t Byte; + struct { + uint8_t WAIT_MODE :1; /* Set to 1 to interpret as wait for next 7 bits x10ms */ + uint8_t WAIT_TIME :7; + } Bits; +} DRVREG_WAIT; + +typedef union DRVREG_FBR{ /* register 0x1A */ + uint8_t Byte; + struct { + uint8_t BEMF_GAIN :2; + uint8_t LOOP_GAIN :2; + uint8_t BRAKE_FACTOR :3; + uint8_t ERM_LRA :1; + } Bits; +} DRVREG_FBR; + +typedef union DRVREG_CTRL1{ /* register 0x1B */ + uint8_t Byte; + struct { + uint8_t C1_DRIVE_TIME :5; + uint8_t C1_AC_COUPLE :1; + uint8_t :1; + uint8_t C1_STARTUP_BOOST :1; + } Bits; +} DRVREG_CTRL1; + +typedef union DRVREG_CTRL2{ /* register 0x1C */ + uint8_t Byte; + struct { + uint8_t C2_IDISS_TIME :2; + uint8_t C2_BLANKING_TIME :2; + uint8_t C2_SAMPLE_TIME :2; + uint8_t C2_BRAKE_STAB :1; + uint8_t C2_BIDIR_INPUT :1; + } Bits; +} DRVREG_CTRL2; + +typedef union DRVREG_CTRL3{ /* register 0x1D */ + uint8_t Byte; + struct { + uint8_t C3_LRA_OPEN_LOOP :1; + uint8_t C3_N_PWM_ANALOG :1; + uint8_t C3_LRA_DRIVE_MODE :1; + uint8_t C3_DATA_FORMAT_RTO :1; + uint8_t C3_SUPPLY_COMP_DIS :1; + uint8_t C3_ERM_OPEN_LOOP :1; + uint8_t C3_NG_THRESH :2; + } Bits; +} DRVREG_CTRL3; + +typedef union DRVREG_CTRL4{ /* register 0x1E */ + uint8_t Byte; + struct { + uint8_t C4_OTP_PROGRAM :1; + uint8_t :1; + uint8_t C4_OTP_STATUS :1; + uint8_t :1; + uint8_t C4_AUTO_CAL_TIME :2; + uint8_t C4_ZC_DET_TIME :2; + } Bits; +} DRVREG_CTRL4; + +typedef union DRVREG_CTRL5{ /* register 0x1F */ + uint8_t Byte; + struct { + uint8_t C5_IDISS_TIME :2; + uint8_t C5_BLANKING_TIME :2; + uint8_t C5_PLAYBACK_INTERVAL :1; + uint8_t C5_LRA_AUTO_OPEN_LOOP :1; + uint8_t C5_AUTO_OL_CNT :2; + } Bits; +} DRVREG_CTRL5;
\ No newline at end of file diff --git a/drivers/qwiic/micro_oled.c b/drivers/qwiic/micro_oled.c new file mode 100644 index 000000000..35c5d6ee1 --- /dev/null +++ b/drivers/qwiic/micro_oled.c @@ -0,0 +1,691 @@ +/* Jim Lindblom @ SparkFun Electronics + * October 26, 2014 + * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED + * + * Modified by: + * Emil Varughese @ Edwin Robotics Pvt. Ltd. + * July 27, 2015 + * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ + * + * This code was heavily based around the MicroView library, written by GeekAmmo + * (https://github.com/geekammo/MicroView-Arduino-Library). + * + * Adapted for QMK by: + * Jack Humbert <jack.humb@gmail.com> + * October 11, 2018 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "micro_oled.h" +#include <stdlib.h> +#include "util/font5x7.h" +#include "util/font8x16.h" +#include "string.h" + +#define TOTALFONTS 2 +const unsigned char * fonts_pointer[]= { font5x7, font8x16 }; + +uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY; +uint16_t fontMapWidth; + +#define _BV(x) (1 << (x)) +#define swap(a, b) { uint8_t t = a; a = b; b = t; } + +uint8_t micro_oled_transfer_buffer[20]; +static uint8_t micro_oled_screen_current[LCDWIDTH*LCDWIDTH/8] = { 0 }; + +/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte + B B .............B ----- + y y .............y \ + t t .............t \ + e e .............e \ + 0 1 .............63 \ + \ + D0 D0.............D0 \ + D1 D1.............D1 / ROW 0 + D2 D2.............D2 / + D3 D3.............D3 / + D4 D4.............D4 / + D5 D5.............D5 / + D6 D6.............D6 / + D7 D7.............D7 ---- + */ + +#if LCDWIDTH == 64 + #if LCDWIDTH == 48 +static uint8_t micro_oled_screen_buffer[] = { +// QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php +//64x48 image +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, +0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, +0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60, +0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE, +0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, +0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF, +0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7, +0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, +0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, +0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, +0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00 +}; + #endif +#elif LCDWIDTH == 128 + #if LCDHEIGHT == 32 + static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = { +//128x32 qmk image +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC, +0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC, +0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00, +0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, +0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80, +0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, +0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, +0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03, +0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, +0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10, +0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01, +0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12, +0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12, +0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3, +0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED, +0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0, +0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C, +0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C, +0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00, +0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F, +0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F, +0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, +0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04, +0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01, +0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07, +0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00 + }; + #elif LCDHEIGHT == 64 + static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = { +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, +0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, +0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF, +0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE, +0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC, +0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00, +0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F, +0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, +0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, +0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00, +0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01, +0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70, +0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0, +0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24, +0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8, +0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04, +0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, +0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0, +0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01, +0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70, +0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18, +0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, +0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, +0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, +0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01, +0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, +0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00, +0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; +//TODO: generate bitmap of QMK logo here + #endif +#else +//catchall for custom screen szies + static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0}; +#endif + + + +void micro_oled_init(void) { + + i2c_init(); + i2c_start(I2C_ADDRESS_SA0_1); + + // Display Init sequence for 64x48 OLED module + send_command(DISPLAYOFF); // 0xAE + + send_command(SETDISPLAYCLOCKDIV); // 0xD5 + send_command(0x80); // the suggested ratio 0x80 + + send_command(SETMULTIPLEX); // 0xA8 + send_command(LCDHEIGHT - 1); + + send_command(SETDISPLAYOFFSET); // 0xD3 + send_command(0x00); // no offset + + send_command(SETSTARTLINE | 0x00); // line #0 + + send_command(CHARGEPUMP); // enable charge pump + send_command(0x14); + + send_command(NORMALDISPLAY); // 0xA6 + send_command(DISPLAYALLONRESUME); // 0xA4 + +//display at regular orientation + send_command(SEGREMAP | 0x1); + send_command(COMSCANDEC); + +//rotate display 180 +#ifdef micro_oled_rotate_180 + send_command(SEGREMAP); + send_command(COMSCANINC); +#endif + + send_command(MEMORYMODE); + send_command(0x10); + + send_command(SETCOMPINS); // 0xDA +if (LCDHEIGHT > 32) { + send_command(0x12); +} else { + send_command(0x02); +} + send_command(SETCONTRAST); // 0x81 + send_command(0x8F); + + send_command(SETPRECHARGE); // 0xd9 + send_command(0xF1); + + send_command(SETVCOMDESELECT); // 0xDB + send_command(0x40); + + send_command(DISPLAYON); //--turn on oled panel + clear_screen(); // Erase hardware memory inside the OLED controller to avoid random data in memory. + send_buffer(); +} + +void send_command(uint8_t command) { + micro_oled_transfer_buffer[0] = I2C_COMMAND; + micro_oled_transfer_buffer[1] = command; + i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); +} + +void send_data(uint8_t data) { + micro_oled_transfer_buffer[0] = I2C_DATA; + micro_oled_transfer_buffer[1] = data; + i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); +} + +/** \brief Set SSD1306 page address. + Send page address command and address to the SSD1306 OLED controller. +*/ +void set_page_address(uint8_t address) { + address = (0xB0 | address); + send_command(address); +} + +/** \brief Set SSD1306 column address. + Send column address command and address to the SSD1306 OLED controller. +*/ +void set_column_address(uint8_t address) { + send_command( ( 0x10 | (address >> 4) ) + ((128 - LCDWIDTH) >> 8) ); + send_command( 0x0F & address ); +} + +/** \brief Clear SSD1306's memory. + To clear GDRAM inside the LCD controller. +*/ +void clear_screen(void) { + for (int i=0;i<8; i++) { + set_page_address(i); + set_column_address(0); + for (int j=0; j<0x80; j++) { + send_data(0); + } + } +} + +/** \brief Clear SSD1306's memory. + To clear GDRAM inside the LCD controller. +*/ +void clear_buffer(void) { +//384 + memset(micro_oled_screen_buffer, 0, LCDWIDTH*LCDWIDTH/8); +} + +/** \brief Invert display. + The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON. +*/ +void invert_screen(bool invert) { + if (invert) { + send_command(INVERTDISPLAY); + } else { + send_command(NORMALDISPLAY); + } +} + +/** \brief Set contrast. + OLED contract value from 0 to 255. Note: Contrast level is not very obvious. +*/ +void set_contrast(uint8_t contrast) { + send_command(SETCONTRAST); // 0x81 + send_command(contrast); +} + +/** \brief Transfer display buffer. + Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time +*/ +void send_buffer(void) { + uint8_t i, j; + + uint8_t page_addr = 0xFF; + for (i = 0; i < LCDHEIGHT/8; i++) { + uint8_t col_addr = 0xFF; + for (j = 0; j < LCDWIDTH; j++) { + if (micro_oled_screen_buffer[i*LCDWIDTH+j] != micro_oled_screen_current[i*LCDWIDTH+j]) { + if (page_addr != i) { + set_page_address(i); + } + if (col_addr != j) { + set_column_address(j); + } + send_data(micro_oled_screen_buffer[i*LCDWIDTH+j]); + micro_oled_screen_current[i*LCDWIDTH+j] = micro_oled_screen_buffer[i*LCDWIDTH+j]; + col_addr = j + 1; + } + } + } +} + +/** \brief Draw pixel with color and mode. + Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode. +*/ +void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) { + if ((x<0) || (x>=LCDWIDTH) || (y<0) || (y>=LCDHEIGHT)) + return; + + if (mode == XOR) { + if (color == PIXEL_ON) + micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] ^= _BV((y%8)); + } else { + if (color == PIXEL_ON) + micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] |= _BV((y%8)); + else + micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] &= ~_BV((y%8)); + } +} + +/** \brief Draw line with color and mode. +Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer. +*/ +void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) { + uint8_t steep = abs(y1 - y0) > abs(x1 - x0); + if (steep) { + swap(x0, y0); + swap(x1, y1); + } + + if (x0 > x1) { + swap(x0, x1); + swap(y0, y1); + } + + uint8_t dx, dy; + dx = x1 - x0; + dy = abs(y1 - y0); + + int8_t err = dx / 2; + int8_t ystep; + + if (y0 < y1) { + ystep = 1; + } else { + ystep = -1;} + + for (; x0<x1; x0++) { + if (steep) { + draw_pixel(y0, x0, color, mode); + } else { + draw_pixel(x0, y0, color, mode); + } + err -= dy; + if (err < 0) { + y0 += ystep; + err += dx; + } + } +} + +/** \brief Draw horizontal line with color and mode. +Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer. +*/ +void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) { + draw_line(x,y,x+width,y,color,mode); +} + +/** \brief Draw vertical line. +Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer. +*/ +void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) { + draw_line(x,y,x,y+height,color,mode); +} + +/** \brief Draw rectangle with color and mode. +Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + uint8_t tempHeight; + + draw_line_hori(x,y, width, color, mode); + draw_line_hori(x,y+height-1, width, color, mode); + + tempHeight=height-2; + + // skip drawing vertical lines to avoid overlapping of pixel that will + // affect XOR plot if no pixel in between horizontal lines + if (tempHeight<1) return; + + draw_line_vert(x,y+1, tempHeight, color, mode); + draw_line_vert(x+width-1, y+1, tempHeight, color, mode); +} + +/** \brief Draw rectangle with color and mode. +Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + uint8_t tempHeight; + + draw_line_hori(x+1,y, width-2, color, mode); + draw_line_hori(x+1,y+height-1, width-2, color, mode); + + tempHeight=height-2; + + // skip drawing vertical lines to avoid overlapping of pixel that will + // affect XOR plot if no pixel in between horizontal lines + if (tempHeight<1) return; + + draw_line_vert(x,y+1, tempHeight, color, mode); + draw_line_vert(x+width-1, y+1, tempHeight, color, mode); +} + +/** \brief Draw filled rectangle with color and mode. +Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + // TODO - need to optimise the memory map draw so that this function will not call pixel one by one + for (int i=x; i<x+width;i++) { + draw_line_vert(i,y, height, color, mode); + } +} + +/** \brief Draw filled rectangle with color and mode. +Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + // TODO - need to optimise the memory map draw so that this function will not call pixel one by one + for (int i=x; i<x+width;i++) { + if (i == x || i == (x + width - 1)) + draw_line_vert(i, y+1, height-2, color, mode); + else + draw_line_vert(i, y, height, color, mode); + } +} + +/** \brief Draw character with color and mode. + Draw character c using color and draw mode at x,y. +*/ +void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) { + // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels + + uint8_t rowsToDraw,row, tempC; + uint8_t i,j,temp; + uint16_t charPerBitmapRow,charColPositionOnBitmap,charRowPositionOnBitmap,charBitmapStartPosition; + + if ((font>=TOTALFONTS) || (font<0)) + return; + + uint8_t fontType = font; + uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0); + uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType]+1); + uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType]+2); + uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType]+3); + uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType]+4)*100)+pgm_read_byte(fonts_pointer[fontType]+5); // two bytes values into integer 16 + + if ((c<fontStartChar) || (c>(fontStartChar+fontTotalChar-1))) // no bitmap for the required c + return; + + tempC=c-fontStartChar; + + // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn + rowsToDraw=fontHeight/8; // 8 is LCD's page size, see SSD1306 datasheet + if (rowsToDraw<=1) rowsToDraw=1; + + // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw + if (rowsToDraw==1) { + for (i=0;i<fontWidth+1;i++) { + if (i==fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5 + temp=0; + else + temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(tempC*fontWidth)+i); + + for (j=0;j<8;j++) { // 8 is the LCD's page height (see datasheet for explanation) + if (temp & 0x1) { + draw_pixel(x+i, y+j, color,mode); + } + else { + draw_pixel(x+i, y+j, !color,mode); + } + + temp >>=1; + } + } + return; + } + + // font height over 8 bit + // take character "0" ASCII 48 as example + charPerBitmapRow = fontMapWidth/fontWidth; // 256/8 =32 char per row + charColPositionOnBitmap = tempC % charPerBitmapRow; // =16 + charRowPositionOnBitmap = (int)(tempC/charPerBitmapRow); // =1 + charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight/8)) + (charColPositionOnBitmap * fontWidth) ; + + // each row on LCD is 8 bit height (see datasheet for explanation) + for(row=0;row<rowsToDraw;row++) { + for (i=0; i<fontWidth;i++) { + temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(charBitmapStartPosition+i+(row*fontMapWidth))); + for (j=0;j<8;j++) { // 8 is the LCD's page height (see datasheet for explanation) + if (temp & 0x1) { + draw_pixel(x+i,y+j+(row*8), color, mode); + } + else { + draw_pixel(x+i,y+j+(row*8), !color, mode); + } + temp >>=1; + } + } + } + +} + +void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font) { + + if ((font>=TOTALFONTS) || (font<0)) + return; + + uint8_t fontType = font; + uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0); + + uint8_t cur_x = x; + for (int i = 0; i < strlen(string); i++) { + draw_char(cur_x, y, string[i], color, mode, font); + cur_x += fontWidth + 1; + } + +} diff --git a/drivers/qwiic/micro_oled.h b/drivers/qwiic/micro_oled.h new file mode 100644 index 000000000..5d6a1029e --- /dev/null +++ b/drivers/qwiic/micro_oled.h @@ -0,0 +1,134 @@ +/* Jim Lindblom @ SparkFun Electronics + * October 26, 2014 + * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED + * + * Modified by: + * Emil Varughese @ Edwin Robotics Pvt. Ltd. + * July 27, 2015 + * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ + * + * This code was heavily based around the MicroView library, written by GeekAmmo + * (https://github.com/geekammo/MicroView-Arduino-Library). + * + * Adapted for QMK by: + * Jack Humbert <jack.humb@gmail.com> + * October 11, 2018 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "qwiic.h" + +void micro_oled_init(void); + +void send_command(uint8_t command); +void send_data(uint8_t data); +void set_page_address(uint8_t address); +void set_column_address(uint8_t address); +void clear_screen(void); +void clear_buffer(void); +void send_buffer(void); +void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode); +void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode); +void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode); +void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode); +void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font); +void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font); + +#define I2C_ADDRESS_SA0_0 0b0111100 +#ifndef I2C_ADDRESS_SA0_1 +#define I2C_ADDRESS_SA0_1 0b0111101 +#endif +#define I2C_COMMAND 0x00 +#define I2C_DATA 0x40 +#define PIXEL_OFF 0 +#define PIXEL_ON 1 + +#ifndef LCDWIDTH +#define LCDWIDTH 64 +#endif +#ifndef LCDWIDTH +#define LCDHEIGHT 48 +#endif +#define FONTHEADERSIZE 6 + +#define NORM 0 +#define XOR 1 + +#define PAGE 0 +#define ALL 1 + +#define WIDGETSTYLE0 0 +#define WIDGETSTYLE1 1 +#define WIDGETSTYLE2 2 + +#define SETCONTRAST 0x81 +#define DISPLAYALLONRESUME 0xA4 +#define DISPLAYALLON 0xA5 +#define NORMALDISPLAY 0xA6 +#define INVERTDISPLAY 0xA7 +#define DISPLAYOFF 0xAE +#define DISPLAYON 0xAF +#define SETDISPLAYOFFSET 0xD3 +#define SETCOMPINS 0xDA +#define SETVCOMDESELECT 0xDB +#define SETDISPLAYCLOCKDIV 0xD5 +#define SETPRECHARGE 0xD9 +#define SETMULTIPLEX 0xA8 +#define SETLOWCOLUMN 0x00 +#define SETHIGHCOLUMN 0x10 +#define SETSTARTLINE 0x40 +#define MEMORYMODE 0x20 +#define COMSCANINC 0xC0 +#define COMSCANDEC 0xC8 +#define SEGREMAP 0xA0 +#define CHARGEPUMP 0x8D +#define EXTERNALVCC 0x01 +#define SWITCHCAPVCC 0x02 + +// Scroll +#define ACTIVATESCROLL 0x2F +#define DEACTIVATESCROLL 0x2E +#define SETVERTICALSCROLLAREA 0xA3 +#define RIGHTHORIZONTALSCROLL 0x26 +#define LEFT_HORIZONTALSCROLL 0x27 +#define VERTICALRIGHTHORIZONTALSCROLL 0x29 +#define VERTICALLEFTHORIZONTALSCROLL 0x2A + +typedef enum CMD { + CMD_CLEAR, //0 + CMD_INVERT, //1 + CMD_CONTRAST, //2 + CMD_DISPLAY, //3 + CMD_SETCURSOR, //4 + CMD_PIXEL, //5 + CMD_LINE, //6 + CMD_LINEH, //7 + CMD_LINEV, //8 + CMD_RECT, //9 + CMD_RECTFILL, //10 + CMD_CIRCLE, //11 + CMD_CIRCLEFILL, //12 + CMD_DRAWCHAR, //13 + CMD_DRAWBITMAP, //14 + CMD_GETLCDWIDTH, //15 + CMD_GETLCDHEIGHT, //16 + CMD_SETCOLOR, //17 + CMD_SETDRAWMODE //18 +} commCommand_t;
\ No newline at end of file diff --git a/drivers/qwiic/qwiic.c b/drivers/qwiic/qwiic.c new file mode 100644 index 000000000..904791992 --- /dev/null +++ b/drivers/qwiic/qwiic.c @@ -0,0 +1,31 @@ +/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "qwiic.h" + +void qwiic_init(void) { + #ifdef QWIIC_JOYSTIIC_ENABLE + joystiic_init(); + #endif + #ifdef QWIIC_MICRO_OLED_ENABLE + micro_oled_init(); + #endif +} + +void qwiic_task(void) { + #ifdef QWIIC_JOYSTIIC_ENABLE + joystiic_task(); + #endif +} diff --git a/drivers/qwiic/qwiic.h b/drivers/qwiic/qwiic.h new file mode 100644 index 000000000..160fb28df --- /dev/null +++ b/drivers/qwiic/qwiic.h @@ -0,0 +1,28 @@ +/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "i2c_master.h" + +#ifdef QWIIC_JOYSTIIC_ENABLE + #include "joystiic.h" +#endif +#ifdef QWIIC_MICRO_OLED_ENABLE + #include "micro_oled.h" +#endif + +void qwiic_init(void); +void qwiic_task(void); diff --git a/drivers/qwiic/qwiic.mk b/drivers/qwiic/qwiic.mk new file mode 100644 index 000000000..4ae2d78e3 --- /dev/null +++ b/drivers/qwiic/qwiic.mk @@ -0,0 +1,18 @@ +ifneq ($(strip $(QWIIC_ENABLE)),) + COMMON_VPATH += $(DRIVER_PATH)/qwiic + OPT_DEFS += -DQWIIC_ENABLE + SRC += qwiic.c + ifeq ($(filter "i2c_master.c", $(SRC)),) + SRC += i2c_master.c + endif +endif + +ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),) + OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE + SRC += joystiic.c +endif + +ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),) + OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE + SRC += micro_oled.c +endif diff --git a/drivers/qwiic/util/font5x7.h b/drivers/qwiic/util/font5x7.h new file mode 100644 index 000000000..0bad206b7 --- /dev/null +++ b/drivers/qwiic/util/font5x7.h @@ -0,0 +1,288 @@ +/****************************************************************************** +font5x7.h +Definition for small font + +This file was imported from the MicroView library, written by GeekAmmo +(https://github.com/geekammo/MicroView-Arduino-Library), and released under +the terms of the GNU General Public License as published by the Free Software +Foundation, either version 3 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. + +Modified by: +Emil Varughese @ Edwin Robotics Pvt. Ltd. +July 27, 2015 +https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ + +******************************************************************************/ +#pragma once + +#include "progmem.h" + +// Standard ASCII 5x7 font +static const unsigned char font5x7[] PROGMEM = { + // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) + 5,8,0,255,12,75, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, + 0x00, 0x18, 0x3C, 0x18, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, + 0x00, 0x18, 0x24, 0x18, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, + 0x30, 0x48, 0x3A, 0x06, 0x0E, + 0x26, 0x29, 0x79, 0x29, 0x26, + 0x40, 0x7F, 0x05, 0x05, 0x07, + 0x40, 0x7F, 0x05, 0x25, 0x3F, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, + 0x14, 0x22, 0x7F, 0x22, 0x14, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, + 0x06, 0x09, 0x7F, 0x01, 0x7F, + 0x00, 0x66, 0x89, 0x95, 0x6A, + 0x60, 0x60, 0x60, 0x60, 0x60, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, + 0x08, 0x04, 0x7E, 0x04, 0x08, + 0x10, 0x20, 0x7E, 0x20, 0x10, + 0x08, 0x08, 0x2A, 0x1C, 0x08, + 0x08, 0x1C, 0x2A, 0x08, 0x08, + 0x1E, 0x10, 0x10, 0x10, 0x10, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, + 0x30, 0x38, 0x3E, 0x38, 0x30, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, + 0x23, 0x13, 0x08, 0x64, 0x62, + 0x36, 0x49, 0x56, 0x20, 0x50, + 0x00, 0x08, 0x07, 0x03, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, + 0x08, 0x08, 0x3E, 0x08, 0x08, + 0x00, 0x80, 0x70, 0x30, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, + 0x00, 0x00, 0x60, 0x60, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, + 0x3E, 0x51, 0x49, 0x45, 0x3E, + 0x00, 0x42, 0x7F, 0x40, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, + 0x21, 0x41, 0x49, 0x4D, 0x33, + 0x18, 0x14, 0x12, 0x7F, 0x10, + 0x27, 0x45, 0x45, 0x45, 0x39, + 0x3C, 0x4A, 0x49, 0x49, 0x31, + 0x41, 0x21, 0x11, 0x09, 0x07, + 0x36, 0x49, 0x49, 0x49, 0x36, + 0x46, 0x49, 0x49, 0x29, 0x1E, + 0x00, 0x00, 0x14, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x00, 0x41, 0x22, 0x14, 0x08, + 0x02, 0x01, 0x59, 0x09, 0x06, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, + 0x7C, 0x12, 0x11, 0x12, 0x7C, + 0x7F, 0x49, 0x49, 0x49, 0x36, + 0x3E, 0x41, 0x41, 0x41, 0x22, + 0x7F, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x49, 0x49, 0x49, 0x41, + 0x7F, 0x09, 0x09, 0x09, 0x01, + 0x3E, 0x41, 0x41, 0x51, 0x73, + 0x7F, 0x08, 0x08, 0x08, 0x7F, + 0x00, 0x41, 0x7F, 0x41, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, + 0x7F, 0x08, 0x14, 0x22, 0x41, + 0x7F, 0x40, 0x40, 0x40, 0x40, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, + 0x7F, 0x04, 0x08, 0x10, 0x7F, + 0x3E, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x09, 0x09, 0x09, 0x06, + 0x3E, 0x41, 0x51, 0x21, 0x5E, + 0x7F, 0x09, 0x19, 0x29, 0x46, + 0x26, 0x49, 0x49, 0x49, 0x32, + 0x03, 0x01, 0x7F, 0x01, 0x03, + 0x3F, 0x40, 0x40, 0x40, 0x3F, + 0x1F, 0x20, 0x40, 0x20, 0x1F, + 0x3F, 0x40, 0x38, 0x40, 0x3F, + 0x63, 0x14, 0x08, 0x14, 0x63, + 0x03, 0x04, 0x78, 0x04, 0x03, + 0x61, 0x59, 0x49, 0x4D, 0x43, + 0x00, 0x7F, 0x41, 0x41, 0x41, + 0x02, 0x04, 0x08, 0x10, 0x20, + 0x00, 0x41, 0x41, 0x41, 0x7F, + 0x04, 0x02, 0x01, 0x02, 0x04, + 0x40, 0x40, 0x40, 0x40, 0x40, + 0x00, 0x03, 0x07, 0x08, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, + 0x7F, 0x28, 0x44, 0x44, 0x38, + 0x38, 0x44, 0x44, 0x44, 0x28, + 0x38, 0x44, 0x44, 0x28, 0x7F, + 0x38, 0x54, 0x54, 0x54, 0x18, + 0x00, 0x08, 0x7E, 0x09, 0x02, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, + 0x7F, 0x08, 0x04, 0x04, 0x78, + 0x00, 0x44, 0x7D, 0x40, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, + 0x7C, 0x08, 0x04, 0x04, 0x78, + 0x38, 0x44, 0x44, 0x44, 0x38, + 0xFC, 0x18, 0x24, 0x24, 0x18, + 0x18, 0x24, 0x24, 0x18, 0xFC, + 0x7C, 0x08, 0x04, 0x04, 0x08, + 0x48, 0x54, 0x54, 0x54, 0x24, + 0x04, 0x04, 0x3F, 0x44, 0x24, + 0x3C, 0x40, 0x40, 0x20, 0x7C, + 0x1C, 0x20, 0x40, 0x20, 0x1C, + 0x3C, 0x40, 0x30, 0x40, 0x3C, + 0x44, 0x28, 0x10, 0x28, 0x44, + 0x4C, 0x90, 0x90, 0x90, 0x7C, + 0x44, 0x64, 0x54, 0x4C, 0x44, + 0x00, 0x08, 0x36, 0x41, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, + 0x3C, 0x26, 0x23, 0x26, 0x3C, + 0x1E, 0xA1, 0xA1, 0x61, 0x12, + 0x3A, 0x40, 0x40, 0x20, 0x7A, + 0x38, 0x54, 0x54, 0x55, 0x59, + 0x21, 0x55, 0x55, 0x79, 0x41, + 0x21, 0x54, 0x54, 0x78, 0x41, + 0x21, 0x55, 0x54, 0x78, 0x40, + 0x20, 0x54, 0x55, 0x79, 0x40, + 0x0C, 0x1E, 0x52, 0x72, 0x12, + 0x39, 0x55, 0x55, 0x55, 0x59, + 0x39, 0x54, 0x54, 0x54, 0x59, + 0x39, 0x55, 0x54, 0x54, 0x58, + 0x00, 0x00, 0x45, 0x7C, 0x41, + 0x00, 0x02, 0x45, 0x7D, 0x42, + 0x00, 0x01, 0x45, 0x7C, 0x40, + 0xF0, 0x29, 0x24, 0x29, 0xF0, + 0xF0, 0x28, 0x25, 0x28, 0xF0, + 0x7C, 0x54, 0x55, 0x45, 0x00, + 0x20, 0x54, 0x54, 0x7C, 0x54, + 0x7C, 0x0A, 0x09, 0x7F, 0x49, + 0x32, 0x49, 0x49, 0x49, 0x32, + 0x32, 0x48, 0x48, 0x48, 0x32, + 0x32, 0x4A, 0x48, 0x48, 0x30, + 0x3A, 0x41, 0x41, 0x21, 0x7A, + 0x3A, 0x42, 0x40, 0x20, 0x78, + 0x00, 0x9D, 0xA0, 0xA0, 0x7D, + 0x39, 0x44, 0x44, 0x44, 0x39, + 0x3D, 0x40, 0x40, 0x40, 0x3D, + 0x3C, 0x24, 0xFF, 0x24, 0x24, + 0x48, 0x7E, 0x49, 0x43, 0x66, + 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, + 0xFF, 0x09, 0x29, 0xF6, 0x20, + 0xC0, 0x88, 0x7E, 0x09, 0x03, + 0x20, 0x54, 0x54, 0x79, 0x41, + 0x00, 0x00, 0x44, 0x7D, 0x41, + 0x30, 0x48, 0x48, 0x4A, 0x32, + 0x38, 0x40, 0x40, 0x22, 0x7A, + 0x00, 0x7A, 0x0A, 0x0A, 0x72, + 0x7D, 0x0D, 0x19, 0x31, 0x7D, + 0x26, 0x29, 0x29, 0x2F, 0x28, + 0x26, 0x29, 0x29, 0x29, 0x26, + 0x30, 0x48, 0x4D, 0x40, 0x20, + 0x38, 0x08, 0x08, 0x08, 0x08, + 0x08, 0x08, 0x08, 0x08, 0x38, + 0x2F, 0x10, 0xC8, 0xAC, 0xBA, + 0x2F, 0x10, 0x28, 0x34, 0xFA, + 0x00, 0x00, 0x7B, 0x00, 0x00, + 0x08, 0x14, 0x2A, 0x14, 0x22, + 0x22, 0x14, 0x2A, 0x14, 0x08, + 0xAA, 0x00, 0x55, 0x00, 0xAA, + 0xAA, 0x55, 0xAA, 0x55, 0xAA, + 0x00, 0x00, 0x00, 0xFF, 0x00, + 0x10, 0x10, 0x10, 0xFF, 0x00, + 0x14, 0x14, 0x14, 0xFF, 0x00, + 0x10, 0x10, 0xFF, 0x00, 0xFF, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x14, 0x14, 0x14, 0xFC, 0x00, + 0x14, 0x14, 0xF7, 0x00, 0xFF, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x14, 0x14, 0xF4, 0x04, 0xFC, + 0x14, 0x14, 0x17, 0x10, 0x1F, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0x1F, 0x00, + 0x10, 0x10, 0x10, 0xF0, 0x00, + 0x00, 0x00, 0x00, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0xF0, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x10, + 0x10, 0x10, 0x10, 0x10, 0x10, + 0x10, 0x10, 0x10, 0xFF, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x14, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x00, 0x00, 0x1F, 0x10, 0x17, + 0x00, 0x00, 0xFC, 0x04, 0xF4, + 0x14, 0x14, 0x17, 0x10, 0x17, + 0x14, 0x14, 0xF4, 0x04, 0xF4, + 0x00, 0x00, 0xFF, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0xF7, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x17, 0x14, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0xF4, 0x14, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x00, 0x00, 0x1F, 0x10, 0x1F, + 0x00, 0x00, 0x00, 0x1F, 0x14, + 0x00, 0x00, 0x00, 0xFC, 0x14, + 0x00, 0x00, 0xF0, 0x10, 0xF0, + 0x10, 0x10, 0xFF, 0x10, 0xFF, + 0x14, 0x14, 0x14, 0xFF, 0x14, + 0x10, 0x10, 0x10, 0x1F, 0x00, + 0x00, 0x00, 0x00, 0xF0, 0x10, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x38, 0x44, 0x44, 0x38, 0x44, + 0x7C, 0x2A, 0x2A, 0x3E, 0x14, + 0x7E, 0x02, 0x02, 0x06, 0x06, + 0x02, 0x7E, 0x02, 0x7E, 0x02, + 0x63, 0x55, 0x49, 0x41, 0x63, + 0x38, 0x44, 0x44, 0x3C, 0x04, + 0x40, 0x7E, 0x20, 0x1E, 0x20, + 0x06, 0x02, 0x7E, 0x02, 0x02, + 0x99, 0xA5, 0xE7, 0xA5, 0x99, + 0x1C, 0x2A, 0x49, 0x2A, 0x1C, + 0x4C, 0x72, 0x01, 0x72, 0x4C, + 0x30, 0x4A, 0x4D, 0x4D, 0x30, + 0x30, 0x48, 0x78, 0x48, 0x30, + 0xBC, 0x62, 0x5A, 0x46, 0x3D, + 0x3E, 0x49, 0x49, 0x49, 0x00, + 0x7E, 0x01, 0x01, 0x01, 0x7E, + 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, + 0x44, 0x44, 0x5F, 0x44, 0x44, + 0x40, 0x51, 0x4A, 0x44, 0x40, + 0x40, 0x44, 0x4A, 0x51, 0x40, + 0x00, 0x00, 0xFF, 0x01, 0x03, + 0xE0, 0x80, 0xFF, 0x00, 0x00, + 0x08, 0x08, 0x6B, 0x6B, 0x08, + 0x36, 0x12, 0x36, 0x24, 0x36, + 0x06, 0x0F, 0x09, 0x0F, 0x06, + 0x00, 0x00, 0x18, 0x18, 0x00, + 0x00, 0x00, 0x10, 0x10, 0x00, + 0x30, 0x40, 0xFF, 0x01, 0x01, + 0x00, 0x1F, 0x01, 0x01, 0x1E, + 0x00, 0x19, 0x1D, 0x17, 0x12, + 0x00, 0x3C, 0x3C, 0x3C, 0x3C, + 0x00, 0x00, 0x00, 0x00, 0x00 +}; diff --git a/drivers/qwiic/util/font8x16.h b/drivers/qwiic/util/font8x16.h new file mode 100644 index 000000000..c070e4ec8 --- /dev/null +++ b/drivers/qwiic/util/font8x16.h @@ -0,0 +1,127 @@ +/****************************************************************************** +font8x16.h +Definition for medium font + +This file was imported from the MicroView library, written by GeekAmmo +(https://github.com/geekammo/MicroView-Arduino-Library), and released under +the terms of the GNU General Public License as published by the Free Software +Foundation, either version 3 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. + +Modified by: +Emil Varughese @ Edwin Robotics Pvt. Ltd. +July 27, 2015 +https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ +******************************************************************************/ +#pragma once + +#include "progmem.h" + +static const unsigned char font8x16[] PROGMEM = { + // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) + 8,16,32,96,2,56, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00, + 0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00, + 0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00, + 0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00, + 0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, + 0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00, + 0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, + 0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00, + 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, + 0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00, + 0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, + 0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00, + 0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, + 0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, + 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00, + 0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00, + 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00, + 0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, + 0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, + 0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00, + 0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, + 0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00, + 0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00, + 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00, + 0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, + 0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00, + 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00, + 0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, + 0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, + 0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, + 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, + 0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00, + 0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, + 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00, + 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00, + 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00, + 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, + 0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, + 0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00, + 0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, + 0x00, 0x10, 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00, + 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, + 0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, + 0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00, + 0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00, + 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; diff --git a/keyboards/hadron/config.h b/keyboards/hadron/config.h index 9111ad727..d54d2c543 100644 --- a/keyboards/hadron/config.h +++ b/keyboards/hadron/config.h @@ -24,7 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x6060 #define MANUFACTURER ishtob #define PRODUCT Hadron Keyboard -#define DESCRIPTION A cherry ML ortholinear keyboard +#define DESCRIPTION A low profile ortholinear keyboard @@ -46,9 +46,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE +//#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE +//#define LOCKING_RESYNC_ENABLE /* key combination for command */ #define IS_COMMAND() ( \ @@ -70,7 +70,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/hadron/hadron.c b/keyboards/hadron/hadron.c index ca5b20e89..fa5065b32 100644 --- a/keyboards/hadron/hadron.c +++ b/keyboards/hadron/hadron.c @@ -1,26 +1,2 @@ #include "hadron.h" - -void matrix_init_kb(void) { - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -}
\ No newline at end of file diff --git a/keyboards/hadron/hadron.h b/keyboards/hadron/hadron.h index a165f4c5c..426face6f 100644 --- a/keyboards/hadron/hadron.h +++ b/keyboards/hadron/hadron.h @@ -7,7 +7,9 @@ #ifdef SUBPROJECT_ver2 #include "ver2.h" #endif - +#ifdef SUBPROJECT_ver3 + #include "ver3.h" +#endif #include "quantum.h" diff --git a/keyboards/hadron/keymaps/default/config.h b/keyboards/hadron/keymaps/default/config.h deleted file mode 100644 index 09922b61b..000000000 --- a/keyboards/hadron/keymaps/default/config.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define LEADER_TIMEOUT 300 -//#define BACKLIGHT_BREATHING - -#define USE_I2C -#define SSD1306OLED -#define OLED_ROTATE180 - -/* ws2812 RGB LED*/ -#define RGB_DI_PIN D4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#endif diff --git a/keyboards/hadron/keymaps/default/rules.mk b/keyboards/hadron/keymaps/default/rules.mk deleted file mode 100644 index 4c6d04f1e..000000000 --- a/keyboards/hadron/keymaps/default/rules.mk +++ /dev/null @@ -1,24 +0,0 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -EXTRAFLAGS += -flto diff --git a/keyboards/hadron/keymaps/side_numpad/config.h b/keyboards/hadron/keymaps/side_numpad/config.h deleted file mode 100644 index 09922b61b..000000000 --- a/keyboards/hadron/keymaps/side_numpad/config.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define LEADER_TIMEOUT 300 -//#define BACKLIGHT_BREATHING - -#define USE_I2C -#define SSD1306OLED -#define OLED_ROTATE180 - -/* ws2812 RGB LED*/ -#define RGB_DI_PIN D4 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 - -#endif diff --git a/keyboards/hadron/readme.md b/keyboards/hadron/readme.md index ebebab9e6..13ef6c66a 100644 --- a/keyboards/hadron/readme.md +++ b/keyboards/hadron/readme.md @@ -2,10 +2,10 @@  -A low-profile Cherry ML ortholinear build. +A low-profile ortholinear build. Keyboard Maintainer: [ishtob](https://github.com/ishtob), [QMK](https://github.com/qmk) -Hardware Supported: Hadron PCB rev0, rev2 +Hardware Supported: Hadron PCB rev0, rev2, rev3 Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/hadron/rules.mk b/keyboards/hadron/rules.mk index 2a8b78045..bd1633f61 100644 --- a/keyboards/hadron/rules.mk +++ b/keyboards/hadron/rules.mk @@ -1,75 +1,2 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -BOOTLOADER = halfkay - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = yes - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -SRC = i2c.c \ - ssd1306.c DEFAULT_FOLDER = hadron/ver2 - -EXTRAFLAGS += -flto diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h index 5ee3f931f..e051db209 100644 --- a/keyboards/hadron/ver2/config.h +++ b/keyboards/hadron/ver2/config.h @@ -29,4 +29,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define UNUSED_PINS +#define USE_I2C +#define SSD1306OLED +#define OLED_ROTATE180 + +/* ws2812 RGB LED*/ +#define RGB_DI_PIN D4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + diff --git a/keyboards/hadron/ver2/keymaps/default/config.h b/keyboards/hadron/ver2/keymaps/default/config.h new file mode 100644 index 000000000..e1fdd6dd3 --- /dev/null +++ b/keyboards/hadron/ver2/keymaps/default/config.h @@ -0,0 +1,9 @@ +#pragma once + +#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND) \ + } + +#define LEADER_TIMEOUT 300 +//#define BACKLIGHT_BREATHING + diff --git a/keyboards/hadron/keymaps/default/keymap.c b/keyboards/hadron/ver2/keymaps/default/keymap.c index de5979c1d..cc79f5267 100644 --- a/keyboards/hadron/keymaps/default/keymap.c +++ b/keyboards/hadron/ver2/keymaps/default/keymap.c @@ -1,5 +1,4 @@ #include QMK_KEYBOARD_H -#include "LUFA/Drivers/Peripheral/TWI.h" #ifdef AUDIO_ENABLE #include "audio.h" #endif @@ -215,29 +214,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; - -#ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - // define variables for reactive RGB bool RGB_INIT = false; bool TOG_STATUS = false; int RGB_current_mode; - - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { rgblight_mode(RGB_current_mode); @@ -251,19 +232,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QWERTY: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_qwerty); - #endif - persistant_default_layer_set(1UL<<_QWERTY); + set_single_persistent_default_layer(_QWERTY); } return false; break; case COLEMAK: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_colemak); - #endif - persistant_default_layer_set(1UL<<_COLEMAK); + set_single_persistent_default_layer(_COLEMAK); } return false; break; @@ -337,53 +312,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void matrix_init_user(void) { - #ifdef USE_I2C - i2c_master_init(); - #ifdef SSD1306OLED - // calls code for the SSD1306 OLED - _delay_ms(400); - TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); - iota_gfx_init(); // turns on the display - #endif - #endif - #ifdef AUDIO_ENABLE - startup_user(); - #endif -} - -void matrix_scan_user(void) { - #ifdef SSD1306OLED - iota_gfx_task(); // this is what updates the display continuously - #endif -} -#ifdef AUDIO_ENABLE - -void startup_user() -{ - _delay_ms(20); // gets rid of tick - PLAY_SONG(tone_startup); -} - -void shutdown_user() -{cc - PLAY_SONG(tone_goodbye); - _delay_ms(150); - stop_all_notes(); -} - -void music_on_user(void) -{ - music_scale_user(); -} - -void music_scale_user(void) -{ - PLAY_SONG(music_scale); -} - -#endif /* * Macro definition @@ -404,6 +333,32 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; } + +//Functions for ver2 +#ifdef KEYBOARD_hadron_ver2 +#include "LUFA/Drivers/Peripheral/TWI.h" +void matrix_init_user(void) { + #ifdef USE_I2C + i2c_master_init(); + #ifdef SSD1306OLED + // calls code for the SSD1306 OLED + _delay_ms(400); + TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); + iota_gfx_init(); // turns on the display + #endif + #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + + +void matrix_scan_user(void) { + #ifdef SSD1306OLED + iota_gfx_task(); // this is what updates the display continuously + #endif +} + void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { if (memcmp(dest->display, source->display, sizeof(dest->display))) { @@ -411,7 +366,6 @@ void matrix_update(struct CharacterMatrix *dest, dest->dirty = true; } } - //assign the right code to your layers for OLED display #define L_BASE 0 #define L_LOWER 8 @@ -491,3 +445,4 @@ void iota_gfx_task_user(void) { matrix_update(&display, &matrix); } +#endif
\ No newline at end of file diff --git a/keyboards/hadron/keymaps/default/readme.md b/keyboards/hadron/ver2/keymaps/default/readme.md index de9680b49..de9680b49 100644 --- a/keyboards/hadron/keymaps/default/readme.md +++ b/keyboards/hadron/ver2/keymaps/default/readme.md diff --git a/keyboards/hadron/keymaps/readme.md b/keyboards/hadron/ver2/keymaps/readme.md index 54fb5f6d9..54fb5f6d9 100644 --- a/keyboards/hadron/keymaps/readme.md +++ b/keyboards/hadron/ver2/keymaps/readme.md diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/config.h b/keyboards/hadron/ver2/keymaps/side_numpad/config.h new file mode 100644 index 000000000..409279a95 --- /dev/null +++ b/keyboards/hadron/ver2/keymaps/side_numpad/config.h @@ -0,0 +1,8 @@ +#pragma once + +#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND)\ + } + +#define LEADER_TIMEOUT 300 +//#define BACKLIGHT_BREATHING + diff --git a/keyboards/hadron/keymaps/side_numpad/keymap.c b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c index fa42c79ea..248bb7ca6 100644 --- a/keyboards/hadron/keymaps/side_numpad/keymap.c +++ b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c @@ -218,15 +218,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; - -#ifdef AUDIO_ENABLE - -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - // define variables for reactive RGB bool RGB_INIT = false; bool TOG_STATUS = false; @@ -234,12 +225,6 @@ bool NUMLAY_STATUS = false; int RGB_current_mode; - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { rgblight_mode(RGB_current_mode); @@ -253,10 +238,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QWERTY: if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_qwerty); - #endif - persistant_default_layer_set(1UL<<_QWERTY); + set_single_persistent_default_layer(_QWERTY); } return false; break; diff --git a/keyboards/hadron/keymaps/side_numpad/readme.md b/keyboards/hadron/ver2/keymaps/side_numpad/readme.md index de9680b49..de9680b49 100644 --- a/keyboards/hadron/keymaps/side_numpad/readme.md +++ b/keyboards/hadron/ver2/keymaps/side_numpad/readme.md diff --git a/keyboards/hadron/keymaps/side_numpad/rules.mk b/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk index 687c285bd..687c285bd 100644 --- a/keyboards/hadron/keymaps/side_numpad/rules.mk +++ b/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk index 521493b3d..c47bdb1af 100644 --- a/keyboards/hadron/ver2/rules.mk +++ b/keyboards/hadron/ver2/rules.mk @@ -1 +1,76 @@ -#AUDIO_ENABLE = yes # Audio output on port C6 +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +BOOTLOADER = halfkay + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = yes +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + + +EXTRAFLAGS += -flto + + +SRC = i2c.c \ + ssd1306.c
\ No newline at end of file diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c index bc0917746..739f06567 100644 --- a/keyboards/hadron/ver2/ver2.c +++ b/keyboards/hadron/ver2/ver2.c @@ -1 +1,26 @@ -#include "ver2.h"
\ No newline at end of file +#include "ver2.h" + + +void matrix_init_kb(void) { + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +}
\ No newline at end of file diff --git a/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c new file mode 100644 index 000000000..4331155df --- /dev/null +++ b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c @@ -0,0 +1,126 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} +#endif +}; +#endif + +void enter_bootloader_mode_if_requested(void); + +/** + * @brief Early initialization code. + * @details This initialization must be performed just after stack setup + * and before any other initialization. + */ +void __early_init(void) { + enter_bootloader_mode_if_requested(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { +} diff --git a/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.h b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.h new file mode 100644 index 000000000..ec26557f3 --- /dev/null +++ b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.h @@ -0,0 +1,1187 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for Clueboard 60% Keyboard + */ + +/* + * Board identifier. + */ +#define BOARD_GENERIC_STM32_F303XC +#define BOARD_NAME "Planck PCB" + +/* + * Board oscillators-related settings. + * NOTE: LSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 0U +#endif + +#define STM32_LSEDRV (3U << 3U) + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 8000000U +#endif + +// #define STM32_HSE_BYPASS + +/* + * MCU type as defined in the ST header. + */ +#define STM32F303xC + +/* + * IO pins assignments. + */ +#define GPIOA_PIN0 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_PIN5 5U +#define GPIOA_PIN6 6U +#define GPIOA_PIN7 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_USB_DM 11U +#define GPIOA_USB_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_PIN3 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_PIN6 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_I2C2_SDA 0U +#define GPIOF_I2C2_SCL 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +#define GPIOG_PIN0 0U +#define GPIOG_PIN1 1U +#define GPIOG_PIN2 2U +#define GPIOG_PIN3 3U +#define GPIOG_PIN4 4U +#define GPIOG_PIN5 5U +#define GPIOG_PIN6 6U +#define GPIOG_PIN7 7U +#define GPIOG_PIN8 8U +#define GPIOG_PIN9 9U +#define GPIOG_PIN10 10U +#define GPIOG_PIN11 11U +#define GPIOG_PIN12 12U +#define GPIOG_PIN13 13U +#define GPIOG_PIN14 14U +#define GPIOG_PIN15 15U + +#define GPIOH_PIN0 0U +#define GPIOH_PIN1 1U +#define GPIOH_PIN2 2U +#define GPIOH_PIN3 3U +#define GPIOH_PIN4 4U +#define GPIOH_PIN5 5U +#define GPIOH_PIN6 6U +#define GPIOH_PIN7 7U +#define GPIOH_PIN8 8U +#define GPIOH_PIN9 9U +#define GPIOH_PIN10 10U +#define GPIOH_PIN11 11U +#define GPIOH_PIN12 12U +#define GPIOH_PIN13 13U +#define GPIOH_PIN14 14U +#define GPIOH_PIN15 15U + +/* + * IO lines assignments. + */ +#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) +#define LINE_USB_DM PAL_LINE(GPIOA, 11U) +#define LINE_USB_DP PAL_LINE(GPIOA, 12U) +#define LINE_SWDIO PAL_LINE(GPIOA, 13U) +#define LINE_SWCLK PAL_LINE(GPIOA, 14U) + +#define LINE_PIN6 PAL_LINE(GPIOF, 0U) +#define LINE_PIN7 PAL_LINE(GPIOF, 1U) + +#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U) + + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - NC + * PA1 - NC + * PA2 - COL1 + * PA3 - COL2 + * PA4 - SPEAKER1 + * PA5 - SPEAKER2 + * PA6 - COL3 + * PA7 - COL8 + * PA8 - COL6 + * PA9 - COL7 + * PA10 - ROW5 + * PA11 - USB_DM (alternate 14). + * PA12 - USB_DP (alternate 14). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - ROW4 + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ + PIN_MODE_ALTERNATE(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_INPUT(GPIOA_PIN4) | \ + PIN_MODE_INPUT(GPIOA_PIN5) | \ + PIN_MODE_INPUT(GPIOA_PIN6) | \ + PIN_MODE_INPUT(GPIOA_PIN7) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_PIN9) | \ + PIN_MODE_INPUT(GPIOA_PIN10) | \ + PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \ + PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ + PIN_OSPEED_HIGH(GPIOA_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ + PIN_OSPEED_HIGH(GPIOA_USB_DM) | \ + PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \ + PIN_PUPDR_FLOATING(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ + PIN_PUPDR_FLOATING(GPIOA_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_PIN4) | \ + PIN_ODR_HIGH(GPIOA_PIN5) | \ + PIN_ODR_HIGH(GPIOA_PIN6) | \ + PIN_ODR_HIGH(GPIOA_PIN7) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_PIN9) | \ + PIN_ODR_HIGH(GPIOA_PIN10) | \ + PIN_ODR_HIGH(GPIOA_USB_DM) | \ + PIN_ODR_HIGH(GPIOA_USB_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \ + PIN_AFIO_AF(GPIOA_PIN1, 1) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0) | \ + PIN_AFIO_AF(GPIOA_PIN4, 0) | \ + PIN_AFIO_AF(GPIOA_PIN5, 5) | \ + PIN_AFIO_AF(GPIOA_PIN6, 5) | \ + PIN_AFIO_AF(GPIOA_PIN7, 5)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \ + PIN_AFIO_AF(GPIOA_PIN9, 0) | \ + PIN_AFIO_AF(GPIOA_PIN10, 0) | \ + PIN_AFIO_AF(GPIOA_USB_DM, 14) | \ + PIN_AFIO_AF(GPIOA_USB_DP, 14) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0)) + +/* + * GPIOB setup: + * + * PB0 - PIN0 (input pullup). + * PB1 - PIN1 (input pullup). + * PB2 - PIN2 (input pullup). + * PB3 - PIN3 (alternate 0). + * PB4 - PIN4 (input pullup). + * PB5 - PIN5 (input pullup). + * PB6 - PIN6 LSM303DLHC_SCL (alternate 4). + * PB7 - PIN7 LSM303DLHC_SDA (alternate 4). + * PB8 - PIN8 (input pullup). + * PB9 - PIN9 (input pullup). + * PB10 - PIN10 (input pullup). + * PB11 - PIN11 (input pullup). + * PB12 - PIN12 (input pullup). + * PB13 - PIN13 (input pullup). + * PB14 - PIN14 (input pullup). + * PB15 - PIN15 (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_PIN3) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_ALTERNATE(GPIOB_PIN6) | \ + PIN_MODE_OUTPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ + PIN_OSPEED_HIGH(GPIOB_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_FLOATING(GPIOB_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_FLOATING(GPIOB_PIN6) | \ + PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_PIN3) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_PIN6) | \ + PIN_ODR_LOW(GPIOB_PIN7) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0) | \ + PIN_AFIO_AF(GPIOB_PIN3, 0) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0) | \ + PIN_AFIO_AF(GPIOB_PIN6, 4) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0)) + +/* + * GPIOC setup: + * + * PC0 - PIN0 (input pullup). + * PC1 - PIN1 (input pullup). + * PC2 - PIN2 (input pullup). + * PC3 - PIN3 (input pullup). + * PC4 - PIN4 (input pullup). + * PC5 - PIN5 (input pullup). + * PC6 - PIN6 (input pullup). + * PC7 - PIN7 (input pullup). + * PC8 - PIN8 (input pullup). + * PC9 - PIN9 (input pullup). + * PC10 - PIN10 (input pullup). + * PC11 - PIN11 (input pullup). + * PC12 - PIN12 (input pullup). + * PC13 - PIN13 (input pullup). + * PC14 - PIN14 (input floating). + * PC15 - PIN15 (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_INPUT(GPIOC_PIN3) | \ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_INPUT(GPIOC_PIN6) | \ + PIN_MODE_INPUT(GPIOC_PIN7) | \ + PIN_MODE_INPUT(GPIOC_PIN8) | \ + PIN_MODE_INPUT(GPIOC_PIN9) | \ + PIN_MODE_INPUT(GPIOC_PIN10) | \ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_INPUT(GPIOC_PIN12) | \ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_PIN14) | \ + PIN_MODE_INPUT(GPIOC_PIN15)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ + PIN_OSPEED_HIGH(GPIOC_PIN14) | \ + PIN_OSPEED_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOC_PIN14) | \ + PIN_PUPDR_FLOATING(GPIOC_PIN15)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_PIN3) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_HIGH(GPIOC_PIN6) | \ + PIN_ODR_HIGH(GPIOC_PIN7) | \ + PIN_ODR_HIGH(GPIOC_PIN8) | \ + PIN_ODR_HIGH(GPIOC_PIN9) | \ + PIN_ODR_HIGH(GPIOC_PIN10) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_PIN12) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_PIN14) | \ + PIN_ODR_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \ + PIN_AFIO_AF(GPIOC_PIN1, 0) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0) | \ + PIN_AFIO_AF(GPIOC_PIN3, 0) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0) | \ + PIN_AFIO_AF(GPIOC_PIN6, 0) | \ + PIN_AFIO_AF(GPIOC_PIN7, 0)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \ + PIN_AFIO_AF(GPIOC_PIN9, 0) | \ + PIN_AFIO_AF(GPIOC_PIN10, 0) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0) | \ + PIN_AFIO_AF(GPIOC_PIN12, 0) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0) | \ + PIN_AFIO_AF(GPIOC_PIN14, 0) | \ + PIN_AFIO_AF(GPIOC_PIN15, 0)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - PIN4 (input pullup). + * PD5 - PIN5 (input pullup). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD11 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - PIN12 (input pullup). + * PD13 - PIN13 (input pullup). + * PD14 - PIN14 (input pullup). + * PD15 - PIN15 (input pullup). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_INPUT(GPIOD_PIN4) | \ + PIN_MODE_INPUT(GPIOD_PIN5) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_INPUT(GPIOD_PIN12) | \ + PIN_MODE_INPUT(GPIOD_PIN13) | \ + PIN_MODE_INPUT(GPIOD_PIN14) | \ + PIN_MODE_INPUT(GPIOD_PIN15)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN15)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN15)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_PIN4) | \ + PIN_ODR_HIGH(GPIOD_PIN5) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_HIGH(GPIOD_PIN12) | \ + PIN_ODR_HIGH(GPIOD_PIN13) | \ + PIN_ODR_HIGH(GPIOD_PIN14) | \ + PIN_ODR_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0) | \ + PIN_AFIO_AF(GPIOD_PIN4, 0) | \ + PIN_AFIO_AF(GPIOD_PIN5, 0) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0) | \ + PIN_AFIO_AF(GPIOD_PIN12, 0) | \ + PIN_AFIO_AF(GPIOD_PIN13, 0) | \ + PIN_AFIO_AF(GPIOD_PIN14, 0) | \ + PIN_AFIO_AF(GPIOD_PIN15, 0)) + +/* + * GPIOE setup: + * + * PE0 - PIN0 (input pullup). + * PE1 - PIN1 (input pullup). + * PE2 - PIN2 (input pullup). + * PE3 - PIN3 L3GD20_CS (output pushpull maximum). + * PE4 - PIN4 (input pullup). + * PE5 - PIN5 (input pullup). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (output pushpull maximum). + * PE9 - PIN9 (output pushpull maximum). + * PE10 - PIN10 (output pushpull maximum). + * PE11 - PIN11 (output pushpull maximum). + * PE12 - PIN12 (output pushpull maximum). + * PE13 - PIN13 (output pushpull maximum). + * PE14 - PIN14 (output pushpull maximum). + * PE15 - PIN15 (output pushpull maximum). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ + PIN_MODE_INPUT(GPIOE_PIN1) | \ + PIN_MODE_INPUT(GPIOE_PIN2) |\ + PIN_MODE_OUTPUT(GPIOE_PIN3) | \ + PIN_MODE_INPUT(GPIOE_PIN4) |\ + PIN_MODE_INPUT(GPIOE_PIN5) |\ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_OUTPUT(GPIOE_PIN8) | \ + PIN_MODE_OUTPUT(GPIOE_PIN9) | \ + PIN_MODE_OUTPUT(GPIOE_PIN10) | \ + PIN_MODE_OUTPUT(GPIOE_PIN11) | \ + PIN_MODE_OUTPUT(GPIOE_PIN12) | \ + PIN_MODE_OUTPUT(GPIOE_PIN13) | \ + PIN_MODE_OUTPUT(GPIOE_PIN14) | \ + PIN_MODE_OUTPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\ + PIN_OSPEED_HIGH(GPIOE_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ + PIN_OSPEED_HIGH(GPIOE_PIN8) | \ + PIN_OSPEED_HIGH(GPIOE_PIN9) | \ + PIN_OSPEED_HIGH(GPIOE_PIN10) | \ + PIN_OSPEED_HIGH(GPIOE_PIN11) | \ + PIN_OSPEED_HIGH(GPIOE_PIN12) | \ + PIN_OSPEED_HIGH(GPIOE_PIN13) | \ + PIN_OSPEED_HIGH(GPIOE_PIN14) | \ + PIN_OSPEED_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN2) |\ + PIN_PUPDR_FLOATING(GPIOE_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN4) |\ + PIN_PUPDR_PULLUP(GPIOE_PIN5) |\ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN14) |\ + PIN_PUPDR_FLOATING(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ + PIN_ODR_HIGH(GPIOE_PIN1) | \ + PIN_ODR_HIGH(GPIOE_PIN2) | \ + PIN_ODR_HIGH(GPIOE_PIN3) | \ + PIN_ODR_HIGH(GPIOE_PIN4) | \ + PIN_ODR_HIGH(GPIOE_PIN5) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_LOW(GPIOE_PIN8) | \ + PIN_ODR_LOW(GPIOE_PIN9) | \ + PIN_ODR_LOW(GPIOE_PIN10) | \ + PIN_ODR_LOW(GPIOE_PIN11) | \ + PIN_ODR_LOW(GPIOE_PIN12) | \ + PIN_ODR_LOW(GPIOE_PIN13) | \ + PIN_ODR_LOW(GPIOE_PIN14) | \ + PIN_ODR_LOW(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \ + PIN_AFIO_AF(GPIOE_PIN1, 0) | \ + PIN_AFIO_AF(GPIOE_PIN2, 0) |\ + PIN_AFIO_AF(GPIOE_PIN3, 0) | \ + PIN_AFIO_AF(GPIOE_PIN4, 0) |\ + PIN_AFIO_AF(GPIOE_PIN5, 0) |\ + PIN_AFIO_AF(GPIOE_PIN6, 0) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0)) + +/* + * GPIOF setup: + * + * PF0 - I2C2_SDA (input floating). + * PF1 - I2C2_SCL (input floating). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \ + PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \ + PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \ + PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \ + PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \ + PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \ + PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0)) + +/* + * GPIOG setup: + * + * PG0 - PIN0 (input pullup). + * PG1 - PIN1 (input pullup). + * PG2 - PIN2 (input pullup). + * PG3 - PIN3 (input pullup). + * PG4 - PIN4 (input pullup). + * PG5 - PIN5 (input pullup). + * PG6 - PIN6 (input pullup). + * PG7 - PIN7 (input pullup). + * PG8 - PIN8 (input pullup). + * PG9 - PIN9 (input pullup). + * PG10 - PIN10 (input pullup). + * PG11 - PIN11 (input pullup). + * PG12 - PIN12 (input pullup). + * PG13 - PIN13 (input pullup). + * PG14 - PIN14 (input pullup). + * PG15 - PIN15 (input pullup). + */ +#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ + PIN_MODE_INPUT(GPIOG_PIN1) | \ + PIN_MODE_INPUT(GPIOG_PIN2) | \ + PIN_MODE_INPUT(GPIOG_PIN3) | \ + PIN_MODE_INPUT(GPIOG_PIN4) | \ + PIN_MODE_INPUT(GPIOG_PIN5) | \ + PIN_MODE_INPUT(GPIOG_PIN6) | \ + PIN_MODE_INPUT(GPIOG_PIN7) | \ + PIN_MODE_INPUT(GPIOG_PIN8) | \ + PIN_MODE_INPUT(GPIOG_PIN9) | \ + PIN_MODE_INPUT(GPIOG_PIN10) | \ + PIN_MODE_INPUT(GPIOG_PIN11) | \ + PIN_MODE_INPUT(GPIOG_PIN12) | \ + PIN_MODE_INPUT(GPIOG_PIN13) | \ + PIN_MODE_INPUT(GPIOG_PIN14) | \ + PIN_MODE_INPUT(GPIOG_PIN15)) +#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) +#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN15)) +#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN15)) +#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ + PIN_ODR_HIGH(GPIOG_PIN1) | \ + PIN_ODR_HIGH(GPIOG_PIN2) | \ + PIN_ODR_HIGH(GPIOG_PIN3) | \ + PIN_ODR_HIGH(GPIOG_PIN4) | \ + PIN_ODR_HIGH(GPIOG_PIN5) | \ + PIN_ODR_HIGH(GPIOG_PIN6) | \ + PIN_ODR_HIGH(GPIOG_PIN7) | \ + PIN_ODR_HIGH(GPIOG_PIN8) | \ + PIN_ODR_HIGH(GPIOG_PIN9) | \ + PIN_ODR_HIGH(GPIOG_PIN10) | \ + PIN_ODR_HIGH(GPIOG_PIN11) | \ + PIN_ODR_HIGH(GPIOG_PIN12) | \ + PIN_ODR_HIGH(GPIOG_PIN13) | \ + PIN_ODR_HIGH(GPIOG_PIN14) | \ + PIN_ODR_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \ + PIN_AFIO_AF(GPIOG_PIN1, 0) | \ + PIN_AFIO_AF(GPIOG_PIN2, 0) | \ + PIN_AFIO_AF(GPIOG_PIN3, 0) | \ + PIN_AFIO_AF(GPIOG_PIN4, 0) | \ + PIN_AFIO_AF(GPIOG_PIN5, 0) | \ + PIN_AFIO_AF(GPIOG_PIN6, 0) | \ + PIN_AFIO_AF(GPIOG_PIN7, 0)) +#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \ + PIN_AFIO_AF(GPIOG_PIN9, 0) | \ + PIN_AFIO_AF(GPIOG_PIN10, 0) | \ + PIN_AFIO_AF(GPIOG_PIN11, 0) | \ + PIN_AFIO_AF(GPIOG_PIN12, 0) | \ + PIN_AFIO_AF(GPIOG_PIN13, 0) | \ + PIN_AFIO_AF(GPIOG_PIN14, 0) | \ + PIN_AFIO_AF(GPIOG_PIN15, 0)) + +/* + * GPIOH setup: + * + * PH0 - PIN0 (input pullup). + * PH1 - PIN1 (input pullup). + * PH2 - PIN2 (input pullup). + * PH3 - PIN3 (input pullup). + * PH4 - PIN4 (input pullup). + * PH5 - PIN5 (input pullup). + * PH6 - PIN6 (input pullup). + * PH7 - PIN7 (input pullup). + * PH8 - PIN8 (input pullup). + * PH9 - PIN9 (input pullup). + * PH10 - PIN10 (input pullup). + * PH11 - PIN11 (input pullup). + * PH12 - PIN12 (input pullup). + * PH13 - PIN13 (input pullup). + * PH14 - PIN14 (input pullup). + * PH15 - PIN15 (input pullup). + */ +#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \ + PIN_MODE_INPUT(GPIOH_PIN1) | \ + PIN_MODE_INPUT(GPIOH_PIN2) | \ + PIN_MODE_INPUT(GPIOH_PIN3) | \ + PIN_MODE_INPUT(GPIOH_PIN4) | \ + PIN_MODE_INPUT(GPIOH_PIN5) | \ + PIN_MODE_INPUT(GPIOH_PIN6) | \ + PIN_MODE_INPUT(GPIOH_PIN7) | \ + PIN_MODE_INPUT(GPIOH_PIN8) | \ + PIN_MODE_INPUT(GPIOH_PIN9) | \ + PIN_MODE_INPUT(GPIOH_PIN10) | \ + PIN_MODE_INPUT(GPIOH_PIN11) | \ + PIN_MODE_INPUT(GPIOH_PIN12) | \ + PIN_MODE_INPUT(GPIOH_PIN13) | \ + PIN_MODE_INPUT(GPIOH_PIN14) | \ + PIN_MODE_INPUT(GPIOH_PIN15)) +#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) +#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN15)) +#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN15)) +#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \ + PIN_ODR_HIGH(GPIOH_PIN1) | \ + PIN_ODR_HIGH(GPIOH_PIN2) | \ + PIN_ODR_HIGH(GPIOH_PIN3) | \ + PIN_ODR_HIGH(GPIOH_PIN4) | \ + PIN_ODR_HIGH(GPIOH_PIN5) | \ + PIN_ODR_HIGH(GPIOH_PIN6) | \ + PIN_ODR_HIGH(GPIOH_PIN7) | \ + PIN_ODR_HIGH(GPIOH_PIN8) | \ + PIN_ODR_HIGH(GPIOH_PIN9) | \ + PIN_ODR_HIGH(GPIOH_PIN10) | \ + PIN_ODR_HIGH(GPIOH_PIN11) | \ + PIN_ODR_HIGH(GPIOH_PIN12) | \ + PIN_ODR_HIGH(GPIOH_PIN13) | \ + PIN_ODR_HIGH(GPIOH_PIN14) | \ + PIN_ODR_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \ + PIN_AFIO_AF(GPIOH_PIN1, 0) | \ + PIN_AFIO_AF(GPIOH_PIN2, 0) | \ + PIN_AFIO_AF(GPIOH_PIN3, 0) | \ + PIN_AFIO_AF(GPIOH_PIN4, 0) | \ + PIN_AFIO_AF(GPIOH_PIN5, 0) | \ + PIN_AFIO_AF(GPIOH_PIN6, 0) | \ + PIN_AFIO_AF(GPIOH_PIN7, 0)) +#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \ + PIN_AFIO_AF(GPIOH_PIN9, 0) | \ + PIN_AFIO_AF(GPIOH_PIN10, 0) | \ + PIN_AFIO_AF(GPIOH_PIN11, 0) | \ + PIN_AFIO_AF(GPIOH_PIN12, 0) | \ + PIN_AFIO_AF(GPIOH_PIN13, 0) | \ + PIN_AFIO_AF(GPIOH_PIN14, 0) | \ + PIN_AFIO_AF(GPIOH_PIN15, 0)) + + +/* + * USB bus activation macro, required by the USB driver. + */ +// #define usb_lld_connect_bus(usbp) +#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14))) +// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT) +/* + * USB bus de-activation macro, required by the USB driver. + */ +// #define usb_lld_disconnect_bus(usbp) +#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP) +// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12) + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk new file mode 100644 index 000000000..43377629a --- /dev/null +++ b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/keyboards/hadron/ver3/bootloader_defs.h b/keyboards/hadron/ver3/bootloader_defs.h new file mode 100644 index 000000000..3b0e9d20a --- /dev/null +++ b/keyboards/hadron/ver3/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/keyboards/hadron/ver3/chconf.h b/keyboards/hadron/ver3/chconf.h new file mode 100644 index 000000000..1d9f12ff1 --- /dev/null +++ b/keyboards/hadron/ver3/chconf.h @@ -0,0 +1,520 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h new file mode 100644 index 000000000..11288f7a5 --- /dev/null +++ b/keyboards/hadron/ver3/config.h @@ -0,0 +1,192 @@ +/* + * Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef REV3_CONFIG_H +#define REV3_CONFIG_H + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0003 + +#undef MATRIX_ROWS +#undef MATRIX_COLS +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + + +//Audio +#undef AUDIO_VOICES +#undef C6_AUDIO + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#define AUDIO_CLICKY + /* to enable clicky on startup */ + //#define AUDIO_CLICKY_ON +#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f +#endif + +//configure qwiic micro_oled driver for the 128x32 oled +#ifdef QWIIC_MICRO_OLED_ENABLE + +#undef I2C_ADDRESS_SA0_1 +#define I2C_ADDRESS_SA0_1 0b0111100 +#define LCDWIDTH 128 +#define LCDHEIGHT 32 +#define micro_oled_rotate_180 + +#endif +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +/* Haptic Driver initialization settings + * Feedback Control Settings */ +#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ +#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ + +#define RATED_VOLTAGE 2 +#define V_RMS 2.0 +#define V_PEAK 2.85 +#define F_LRA 205 +/* Library Selection */ +#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ + +/* Control 1 register settings */ +#define DRIVE_TIME 25 +#define AC_COUPLE 0 +#define STARTUP_BOOST 1 + +/* Control 2 Settings */ +#define BIDIR_INPUT 1 +#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ +#define SAMPLE_TIME 3 +#define BLANKING_TIME 1 +#define IDISS_TIME 1 + +/* Control 3 settings */ +#define NG_THRESH 2 +#define ERM_OPEN_LOOP 1 +#define SUPPLY_COMP_DIS 0 +#define DATA_FORMAT_RTO 0 +#define LRA_DRIVE_MODE 0 +#define N_PWM_ANALOG 0 +#define LRA_OPEN_LOOP 0 +/* Control 4 settings */ +#define ZC_DET_TIME 0 +#define AUTO_CAL_TIME 3 + +//#define WS2812_LED_N 2 +//#define RGBLED_NUM WS2812_LED_N +//#define WS2812_TIM_N 2 +//#define WS2812_TIM_CH 2 +//#define PORT_WS2812 GPIOA +//#define PIN_WS2812 15 +//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) +//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP +//#define WS2812_EXTERNAL_PULLUP + +#endif diff --git a/keyboards/hadron/ver3/halconf.h b/keyboards/hadron/ver3/halconf.h new file mode 100644 index 000000000..c3e0cbb72 --- /dev/null +++ b/keyboards/hadron/ver3/halconf.h @@ -0,0 +1,388 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/hadron/ver3/keymaps/default/config.h b/keyboards/hadron/ver3/keymaps/default/config.h new file mode 100644 index 000000000..6f70f09be --- /dev/null +++ b/keyboards/hadron/ver3/keymaps/default/config.h @@ -0,0 +1 @@ +#pragma once diff --git a/keyboards/hadron/ver3/keymaps/default/keymap.c b/keyboards/hadron/ver3/keymaps/default/keymap.c new file mode 100644 index 000000000..11761b321 --- /dev/null +++ b/keyboards/hadron/ver3/keymaps/default/keymap.c @@ -0,0 +1,295 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _MOUSECURSOR 8 +#define _ADJUST 16 + +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT, + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, +}; + +enum macro_keycodes { + KC_DEMOMACRO, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +// Custom macros +#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl +#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl +#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl +#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift +// Requires KC_TRNS/_______ for the trigger key in the destination layer +#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor +#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise +#define DEMOMACRO M(KC_DEMOMACRO) // Sample for macros + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | DEL | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | E | R | T | 7 | 8 | 9 | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | A | S | D | F | G | 4 | 5 | 6 | H | J | K | L | ;/Nav| ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | 1 | 2 | 3 | N | M | , | . | / |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_H, KC_J, KC_K, KC_L,LT_MC(KC_SCLN), KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT,KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | Q | W | F | P | G | 7 | 8 | 9 | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | CAPS | A | R | S | T | D | 4 | 5 | 6 | H | N | E | I | O | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | 1 | 2 | 3 | K | M | , | . | / |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_P7, KC_P8, KC_P9, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_LCTRL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_P4, KC_P5, KC_P6, KC_H, KC_N, KC_E, KC_I, LT_MC(KC_O), KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, CTL_ENT, \ + KC_GRV, KC_CAPS, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + +/* Dvorak + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Tab | " | , | . | P | Y | 7 | 8 | 9 | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Esc | A | O | E | U | I | 4 | 5 | 6 | D | H | T | N | S | / | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | 1 | 2 | 3 | B | M | W | V | Z |Ctl/Et| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right | + * `--------------------------------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_P7, KC_P8, KC_P9, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_P4, KC_P5, KC_P6, KC_D, KC_H, KC_T, KC_N, LT_MC(KC_S), KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_P1, KC_P2, KC_P3, KC_B, KC_M, KC_W, KC_V, KC_Z, CTL_ENT, \ + KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,------+------+------+------+------+------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO ~ |ISO | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO # |ISO / | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `--------------------------------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Mouse Layer (semi-col) + * ,------+------+------+------+------+------------------------------------------------. + * | ACCL0| ACCL1| ACCL2| | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | | | | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro| | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | BTN1 | | | | BTN1 | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ + +[_MOUSECURSOR] = LAYOUT( + KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \ + _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______ \ +), + +/* Adjust (Lower + Raise) + * ,------+------+------+------+------+------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. + * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | | + * `--------------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \ + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CK_RST, CK_DOWN, CK_UP, CK_TOGG\ +) + + + +}; + +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} + + +/* + * Macro definition + */ +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + + switch (id) { + case KC_DEMOMACRO: + if (record->event.pressed){ + return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); + } + } + + return MACRO_NONE; +} + + +void matrix_init_user(void) { +} + + +void matrix_scan_user(void) { +} + diff --git a/keyboards/hadron/ver3/keymaps/default/readme.md b/keyboards/hadron/ver3/keymaps/default/readme.md new file mode 100644 index 000000000..88b958ec4 --- /dev/null +++ b/keyboards/hadron/ver3/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# The Default Hadron Layout + diff --git a/keyboards/hadron/ver3/keymaps/readme.md b/keyboards/hadron/ver3/keymaps/readme.md new file mode 100644 index 000000000..54fb5f6d9 --- /dev/null +++ b/keyboards/hadron/ver3/keymaps/readme.md @@ -0,0 +1,23 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Planck keymaps + +* **default** default Planck layout +* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file diff --git a/keyboards/hadron/ver3/matrix.c b/keyboards/hadron/ver3/matrix.c new file mode 100644 index 000000000..329d1328a --- /dev/null +++ b/keyboards/hadron/ver3/matrix.c @@ -0,0 +1,195 @@ +#include <string.h> +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "printf.h" +#include "backlight.h" +#include "matrix.h" +#include "action.h" +#include "keycode.h" + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_COLS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + +static uint8_t encoder_state = 0; +static int8_t encoder_value = 0; +static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 }; + +__attribute__ ((weak)) +void matrix_init_user(void) {} + +__attribute__ ((weak)) +void matrix_scan_user(void) {} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +void matrix_init(void) { + printf("matrix init\n"); + //debug_matrix = true; + + // encoder setup + palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP); + + encoder_state = (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1); + + // actual matrix setup + palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 6, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL); + + palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN); + + + memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); + + + matrix_init_quantum(); +} + +__attribute__ ((weak)) +void encoder_update(bool clockwise) { } + +#ifndef ENCODER_RESOLUTION + #define ENCODER_RESOLUTION 4 +#endif + +uint8_t matrix_scan(void) { + // encoder on B13 and B14 + encoder_state <<= 2; + encoder_state |= (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1); + encoder_value += encoder_LUT[encoder_state & 0xF]; + if (encoder_value >= ENCODER_RESOLUTION) { + encoder_update(0); + } + if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise + encoder_update(1); + } + encoder_value %= ENCODER_RESOLUTION; + + // actual matrix + for (int col = 0; col < MATRIX_COLS; col++) { + matrix_row_t data = 0; + + // strobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, } + switch (col) { + case 0: palSetPad(GPIOB, 8); break; + case 1: palSetPad(GPIOB, 2); break; + case 2: palSetPad(GPIOB, 10); break; + case 3: palSetPad(GPIOA, 0); break; + case 4: palSetPad(GPIOA, 1); break; + case 5: palSetPad(GPIOA, 2); break; + case 6: palSetPad(GPIOB, 0); break; + case 7: palSetPad(GPIOA, 3); break; + case 8: palSetPad(GPIOB, 1); break; + case 9: palSetPad(GPIOA, 6); break; + case 10: palSetPad(GPIOA, 7); break; + case 11: palSetPad(GPIOB, 12); break; + case 12: palSetPad(GPIOC, 13); break; + case 13: palSetPad(GPIOB, 11); break; + case 14: palSetPad(GPIOB, 9); break; + } + + // need wait to settle pin state + wait_us(20); + + // read row data { PC15, PC14, PA10, PA9, PA8 } + data = ( + (palReadPad(GPIOC, 15) << 0 ) | + (palReadPad(GPIOC, 14) << 1 ) | + (palReadPad(GPIOA, 10) << 2 ) | + (palReadPad(GPIOA, 9) << 3 ) | + (palReadPad(GPIOA, 8) << 4 ) + ); + + // unstrobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, } + switch (col) { + case 0: palClearPad(GPIOB, 8); break; + case 1: palClearPad(GPIOB, 2); break; + case 2: palClearPad(GPIOB, 10); break; + case 3: palClearPad(GPIOA, 0); break; + case 4: palClearPad(GPIOA, 1); break; + case 5: palClearPad(GPIOA, 2); break; + case 6: palClearPad(GPIOB, 0); break; + case 7: palClearPad(GPIOA, 3); break; + case 8: palClearPad(GPIOB, 1); break; + case 9: palClearPad(GPIOA, 6); break; + case 10: palClearPad(GPIOA, 7); break; + case 11: palClearPad(GPIOB, 12); break; + case 12: palClearPad(GPIOC, 13); break; + case 13: palClearPad(GPIOB, 11); break; + case 14: palClearPad(GPIOB, 9); break; + } + + if (matrix_debouncing[col] != data) { + matrix_debouncing[col] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = 0; + for (int col = 0; col < MATRIX_COLS; col++) { + matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); + } + } + debouncing = false; + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) { + return (matrix[row] & (1<<col)); +} + +matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { + printf("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + printf("%X0: ", row); + matrix_row_t data = matrix_get_row(row); + for (int col = 0; col < MATRIX_COLS; col++) { + if (data & (1<<col)) + printf("1"); + else + printf("0"); + } + printf("\n"); + } +} diff --git a/keyboards/hadron/ver3/mcuconf.h b/keyboards/hadron/ver3/mcuconf.h new file mode 100644 index 000000000..36f8ca225 --- /dev/null +++ b/keyboards/hadron/ver3/mcuconf.h @@ -0,0 +1,257 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +#undef STM32_HSE_BYPASS +// #error "oh no" +// #endif + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 TRUE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/hadron/ver3/rev3.h b/keyboards/hadron/ver3/rev3.h new file mode 100644 index 000000000..2cbd53ace --- /dev/null +++ b/keyboards/hadron/ver3/rev3.h @@ -0,0 +1,21 @@ +/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef REV3_H +#define REV3_H + +#include "hadron.h" + +#endif
\ No newline at end of file diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk new file mode 100644 index 000000000..8375efdd3 --- /dev/null +++ b/keyboards/hadron/ver3/rules.mk @@ -0,0 +1,57 @@ +# project specific files +SRC = matrix.c + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F3xx + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +MCU_LDSCRIPT = STM32F303xC + +# Startup code to use +# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f3xx + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +BOARD = GENERIC_STM32_F303XC + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 +OPT_DEFS = + +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +CUSTOM_MATRIX = yes # Custom matrix file +AUDIO_ENABLE = yes +RGBLIGHT_ENABLE = no +HAPTIC_ENABLE = DRV2605L +QWIIC_ENABLE += MICRO_OLED +# SERIAL_LINK_ENABLE = yes diff --git a/keyboards/hadron/ver3/ver3.c b/keyboards/hadron/ver3/ver3.c new file mode 100644 index 000000000..5e5e3e009 --- /dev/null +++ b/keyboards/hadron/ver3/ver3.c @@ -0,0 +1,196 @@ +/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "ver3.h" +#include "qwiic.h" +#include "action_layer.h" +#include "matrix.h" +#include "DRV2605L.h" + +#ifdef QWIIC_MICRO_OLED_ENABLE + +/* screen off after this many milliseconds */ +#include "timer.h" +#define ScreenOffInterval 60000 /* milliseconds */ +static uint16_t last_flush; + +volatile uint8_t led_numlock = false; +volatile uint8_t led_capslock = false; +volatile uint8_t led_scrolllock = false; + +static uint8_t layer; +static bool queue_for_send = false; +static uint8_t encoder_value = 32; + +__attribute__ ((weak)) +void draw_ui(void) { + clear_buffer(); + last_flush = timer_read(); + send_command(DISPLAYON); + +/* Layer indicator is 41 x 10 pixels */ +#define LAYER_INDICATOR_X 0 +#define LAYER_INDICATOR_Y 0 + + draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0); + draw_rect_filled_soft(LAYER_INDICATOR_X + 32, LAYER_INDICATOR_Y + 1, 9, 9, PIXEL_ON, NORM); + draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0); + +/* Matrix display is 19 x 9 pixels */ +#define MATRIX_DISPLAY_X 0 +#define MATRIX_DISPLAY_Y 18 + + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + for (uint8_t y = 0; y < MATRIX_COLS; y++) { + draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM); + } + } + draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM); + /* hadron oled location on thumbnail */ + draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM); +/* + draw_rect_soft(0, 13, 64, 6, PIXEL_ON, NORM); + draw_line_vert(encoder_value, 13, 6, PIXEL_ON, NORM); + +*/ + +/* Mod display is 41 x 16 pixels */ +#define MOD_DISPLAY_X 30 +#define MOD_DISPLAY_Y 18 + + uint8_t mods = get_mods(); + if (mods & MOD_LSFT) { + draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); + draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0); + } else { + draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0); + } + if (mods & MOD_LCTL) { + draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); + draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0); + } else { + draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0); + } + if (mods & MOD_LALT) { + draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); + draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0); + } else { + draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0); + } + if (mods & MOD_LGUI) { + draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); + draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0); + } else { + draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0); + } + +/* Lock display is 23 x 32 */ +#define LOCK_DISPLAY_X 100 +#define LOCK_DISPLAY_Y 0 + + if (led_numlock == true) { + draw_rect_filled_soft(LOCK_DISPLAY_X, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM); + draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_OFF, NORM, 0); + } else if (led_numlock == false) { + draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_ON, NORM, 0); + } + if (led_capslock == true) { + draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM); + draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_OFF, NORM, 0); + } else if (led_capslock == false) { + draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_ON, NORM, 0); + } + + if (led_scrolllock == true) { + draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 22, 5 + (3 * 6), 9, PIXEL_ON, NORM); + draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_OFF, NORM, 0); + } else if (led_scrolllock == false) { + draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_ON, NORM, 0); + } + send_buffer(); +} + +void read_host_led_state(void) { + uint8_t leds = host_keyboard_leds(); + if (leds & (1 << USB_LED_NUM_LOCK)) { + if (led_numlock == false){ + led_numlock = true;} + } else { + if (led_numlock == true){ + led_numlock = false;} + } + if (leds & (1 << USB_LED_CAPS_LOCK)) { + if (led_capslock == false){ + led_capslock = true;} + } else { + if (led_capslock == true){ + led_capslock = false;} + } + if (leds & (1 << USB_LED_SCROLL_LOCK)) { + if (led_scrolllock == false){ + led_scrolllock = true;} + } else { + if (led_scrolllock == true){ + led_scrolllock = false;} + } +} + +uint32_t layer_state_set_kb(uint32_t state) { + state = layer_state_set_user(state); + layer = biton32(state); + queue_for_send = true; + return state; +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + queue_for_send = true; + return process_record_user(keycode, record); +} + +void encoder_update_kb(uint8_t index, bool clockwise) { + encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64; + queue_for_send = true; +} + +#endif + +void matrix_init_kb(void) { +#ifdef DRV2605L + DRV_init(); +#endif + queue_for_send = true; + matrix_init_user(); +} + +void matrix_scan_kb(void) { + +if (queue_for_send) { + #ifdef DRV2605L + DRV_EFFECT play_eff = strong_click; + DRV_pulse(play_eff); + #endif +#ifdef QWIIC_MICRO_OLED_ENABLE + read_host_led_state(); + draw_ui(); +#endif + queue_for_send = false; + } +#ifdef QWIIC_MICRO_OLED_ENABLE + if (timer_elapsed(last_flush) > ScreenOffInterval) { + send_command(DISPLAYOFF); /* 0xAE */ + } +#endif + matrix_scan_user(); +} diff --git a/keyboards/hadron/ver3/ver3.h b/keyboards/hadron/ver3/ver3.h new file mode 100644 index 000000000..516f7b9a1 --- /dev/null +++ b/keyboards/hadron/ver3/ver3.h @@ -0,0 +1,21 @@ +/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef VER3_H +#define VER3_H + +#include "hadron.h" + +#endif
\ No newline at end of file diff --git a/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk b/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk deleted file mode 100644 index c56d6f37e..000000000 --- a/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk +++ /dev/null @@ -1,25 +0,0 @@ - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/tmk_core/common/action_layer.h b/tmk_core/common/action_layer.h index 6d48321f9..f1551d251 100644 --- a/tmk_core/common/action_layer.h +++ b/tmk_core/common/action_layer.h @@ -82,12 +82,10 @@ void layer_xor(uint32_t state); #define layer_or(state) #define layer_and(state) #define layer_xor(state) +#endif -__attribute__((weak)) uint32_t layer_state_set_user(uint32_t state); -__attribute__((weak)) uint32_t layer_state_set_kb(uint32_t state); -#endif /* pressed actions cache */ #if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE) diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index a6a5fb56b..6f659b244 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -72,6 +72,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef HD44780_ENABLE # include "hd44780.h" #endif +#ifdef QWIIC_ENABLE +# include "qwiic.h" +#endif #ifdef MATRIX_HAS_GHOST extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; @@ -161,6 +164,9 @@ bool is_keyboard_master(void) { void keyboard_init(void) { timer_init(); matrix_init(); +#ifdef QWIIC_ENABLE + qwiic_init(); +#endif #ifdef PS2_MOUSE_ENABLE ps2_mouse_init(); #endif @@ -270,6 +276,10 @@ void keyboard_task(void) MATRIX_LOOP_END: +#ifdef QWIIC_ENABLE + qwiic_task(); +#endif + #ifdef MOUSEKEY_ENABLE // mousekey repeat & acceleration mousekey_task(); |