summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--keyboards/comet46/comet46.c8
-rw-r--r--keyboards/comet46/comet46.h40
-rw-r--r--keyboards/comet46/config.h12
-rw-r--r--keyboards/comet46/i2c.c162
-rw-r--r--keyboards/comet46/i2c.h49
-rw-r--r--keyboards/comet46/keymaps/default-rgbled/keymap.c226
-rw-r--r--keyboards/comet46/keymaps/default-rgbled/readme.md3
-rw-r--r--keyboards/comet46/keymaps/default/config.h31
-rw-r--r--keyboards/comet46/keymaps/default/keymap.c189
-rw-r--r--keyboards/comet46/keymaps/default/readme.md3
-rw-r--r--keyboards/comet46/keymaps/default/rules.mk5
-rw-r--r--keyboards/comet46/keymaps/satt/action_pseudo_lut.c212
-rw-r--r--keyboards/comet46/keymaps/satt/config.h34
-rw-r--r--keyboards/comet46/keymaps/satt/keymap.c256
-rw-r--r--keyboards/comet46/keymaps/satt/keymap_jis2us.h46
-rw-r--r--keyboards/comet46/keymaps/satt/rules.mk29
-rw-r--r--keyboards/comet46/lib/glcdfont.c148
-rw-r--r--keyboards/comet46/lib/host_led_state_reader.c15
-rw-r--r--keyboards/comet46/lib/keylogger.c294
-rw-r--r--keyboards/comet46/lib/modifier_state_reader.c18
-rw-r--r--keyboards/comet46/readme.md5
-rw-r--r--keyboards/comet46/rules.mk16
-rw-r--r--keyboards/comet46/ssd1306.c344
-rw-r--r--keyboards/comet46/ssd1306.h91
24 files changed, 1906 insertions, 330 deletions
diff --git a/keyboards/comet46/comet46.c b/keyboards/comet46/comet46.c
index 20dcfab83..0710b8e33 100644
--- a/keyboards/comet46/comet46.c
+++ b/keyboards/comet46/comet46.c
@@ -4,19 +4,11 @@ void uart_init(void) {
SERIAL_UART_INIT();
}
-void led_init(void) {
- DDRD |= (1<<1);
- PORTD |= (1<<1);
- DDRF |= (1<<4) | (1<<5);
- PORTF |= (1<<4) | (1<<5);
-}
-
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
uart_init();
- led_init();
}
void matrix_scan_kb(void) {
diff --git a/keyboards/comet46/comet46.h b/keyboards/comet46/comet46.h
index 7d6d6d513..07dad0a00 100644
--- a/keyboards/comet46/comet46.h
+++ b/keyboards/comet46/comet46.h
@@ -6,46 +6,6 @@
#include "backlight.h"
#include <stddef.h>
-#define red_led_off PORTF |= (1<<5)
-#define red_led_on PORTF &= ~(1<<5)
-#define blu_led_off PORTF |= (1<<4)
-#define blu_led_on PORTF &= ~(1<<4)
-#define grn_led_off PORTD |= (1<<1)
-#define grn_led_on PORTD &= ~(1<<1)
-
-#define set_led_off red_led_off; grn_led_off; blu_led_off
-#define set_led_red red_led_on; grn_led_off; blu_led_off
-#define set_led_blue red_led_off; grn_led_off; blu_led_on
-#define set_led_green red_led_off; grn_led_on; blu_led_off
-#define set_led_yellow red_led_on; grn_led_on; blu_led_off
-#define set_led_magenta red_led_on; grn_led_off; blu_led_on
-#define set_led_cyan red_led_off; grn_led_on; blu_led_on
-#define set_led_white red_led_on; grn_led_on; blu_led_on
-
-/*
-#define LED_B 5
-#define LED_R 6
-#define LED_G 7
-
-#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-
-#define red_led_on PORTF |= (1<<LED_R)
-#define red_led_off PORTF &= ~(1<<LED_R)
-#define grn_led_on PORTF |= (1<<LED_G)
-#define grn_led_off PORTF &= ~(1<<LED_G)
-#define blu_led_on PORTF |= (1<<LED_B)
-#define blu_led_off PORTF &= ~(1<<LED_B)
-
-#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
-#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
-#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
-#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
-#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
-#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-*/
-
// This a shortcut to help you visually see your layout.
// The first section contains all of the arguements
// The second converts the arguments into a two-dimensional array
diff --git a/keyboards/comet46/config.h b/keyboards/comet46/config.h
index 2421f5341..c43f13a50 100644
--- a/keyboards/comet46/config.h
+++ b/keyboards/comet46/config.h
@@ -41,12 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define ONESHOT_TIMEOUT 500
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -65,6 +59,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
+// Define masks for modifiers
+#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL))
+#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
+
//UART settings for communication with the RF microcontroller
#define SERIAL_UART_BAUD 1000000
#define SERIAL_UART_DATA UDR1
diff --git a/keyboards/comet46/i2c.c b/keyboards/comet46/i2c.c
new file mode 100644
index 000000000..4bee5c639
--- /dev/null
+++ b/keyboards/comet46/i2c.c
@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+ uint16_t lim = 0;
+ while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+ lim++;
+
+ // easier way, but will wait slightly longer
+ // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
+void i2c_master_init(void) {
+ // no prescaler
+ TWSR = 0;
+ // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+ // Check datasheets for more info.
+ TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+// 1 => error
+uint8_t i2c_master_start(uint8_t address) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+ i2c_delay();
+
+ // check that we started successfully
+ if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+ return 1;
+
+ TWDR = address;
+ TWCR = (1<<TWINT) | (1<<TWEN);
+
+ i2c_delay();
+
+ if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+ return 1; // slave did not acknowledge
+ else
+ return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+ uint16_t lim = 0;
+ while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+ lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+// 1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+ TWDR = data;
+ TWCR = (1<<TWINT) | (1<<TWEN);
+
+ i2c_delay();
+
+ // check if the slave acknowledged us
+ return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+ i2c_delay();
+ return TWDR;
+}
+
+void i2c_reset_state(void) {
+ TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+ TWAR = address << 0; // slave i2c address
+ // TWEN - twi enable
+ // TWEA - enable address acknowledgement
+ // TWINT - twi interrupt flag
+ // TWIE - enable the twi interrupt
+ TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+ uint8_t ack = 1;
+ switch(TW_STATUS) {
+ case TW_SR_SLA_ACK:
+ // this device has been addressed as a slave receiver
+ slave_has_register_set = false;
+ break;
+
+ case TW_SR_DATA_ACK:
+ // this device has received data as a slave receiver
+ // The first byte that we receive in this transaction sets the location
+ // of the read/write location of the slaves memory that it exposes over
+ // i2c. After that, bytes will be written at slave_buffer_pos, incrementing
+ // slave_buffer_pos after each write.
+ if(!slave_has_register_set) {
+ slave_buffer_pos = TWDR;
+ // don't acknowledge the master if this memory loctaion is out of bounds
+ if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+ ack = 0;
+ slave_buffer_pos = 0;
+ }
+ slave_has_register_set = true;
+ } else {
+ i2c_slave_buffer[slave_buffer_pos] = TWDR;
+ BUFFER_POS_INC();
+ }
+ break;
+
+ case TW_ST_SLA_ACK:
+ case TW_ST_DATA_ACK:
+ // master has addressed this device as a slave transmitter and is
+ // requesting data.
+ TWDR = i2c_slave_buffer[slave_buffer_pos];
+ BUFFER_POS_INC();
+ break;
+
+ case TW_BUS_ERROR: // something went wrong, reset twi state
+ TWCR = 0;
+ default:
+ break;
+ }
+ // Reset everything, so we are ready for the next TWI interrupt
+ TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
diff --git a/keyboards/comet46/i2c.h b/keyboards/comet46/i2c.h
new file mode 100644
index 000000000..47cf6bd1b
--- /dev/null
+++ b/keyboards/comet46/i2c.h
@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency 400kHz
+#define SCL_CLOCK 400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+ return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+ return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
diff --git a/keyboards/comet46/keymaps/default-rgbled/keymap.c b/keyboards/comet46/keymaps/default-rgbled/keymap.c
new file mode 100644
index 000000000..d446d50d0
--- /dev/null
+++ b/keyboards/comet46/keymaps/default-rgbled/keymap.c
@@ -0,0 +1,226 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum comet46_layers
+{
+ _QWERTY,
+ _COLEMAK,
+ _DVORAK,
+ _LOWER,
+ _RAISE,
+ _ADJUST,
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Qwerty
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Ctl | A | S | D | F | G | Esc | | Del | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | { | | } | N | M | , | . | / | Shift|
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | GUI | Lower| Space| | Enter| Raise| Alt |
+ * +--------------------/ \--------------------+
+ */
+ [_QWERTY] = LAYOUT(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_ESC, KC_DEL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT
+ ),
+
+ /* Colemak
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Ctl | A | R | S | T | D | Esc | | Del | H | N | E | I | O | " |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | { | | } | K | M | , | . | / | Shift|
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | GUI | Lower| Space| | Enter| Raise| Alt |
+ * +--------------------/ \--------------------+
+ */
+ [_COLEMAK] = LAYOUT(
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC,
+ KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_ESC, KC_DEL, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT
+ ),
+
+ /* Dvorak
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Ctl | A | O | E | U | I | Esc | | Del | D | H | T | N | S | / |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | { | | } | B | M | W | V | Z | Shift|
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | GUI | Lower| Space| | Enter| Raise| Alt |
+ * +--------------------/ \--------------------+
+ */
+ [_DVORAK] = LAYOUT(
+ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC,
+ KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_ESC, KC_DEL, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH,
+ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LCBR, KC_RCBR, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,
+ KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT
+ ),
+
+ /* Lower
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | | | | | | | | ` | \ | - | = | [ | ] | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | | | | | | | | ~ | | | _ | + | { | } | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | | | | | | | |
+ * +--------------------/ \--------------------+
+ */
+ [_LOWER] = LAYOUT(
+ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+ _______, _______, _______, _______, _______, _______
+ ),
+
+ /* Raise
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | | 1 | 2 | 3 | 4 | 5 | | | | | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | PgDn | PgUp | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | | | | | | | |
+ * +--------------------/ \--------------------+
+ */
+ [_RAISE] = LAYOUT(
+ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______,
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______,
+ _______, _______, _______, _______, _______, _______
+ ),
+
+ /* Adjust
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | | | | | |Qwerty| |Colemk| | | | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | | | | | |Reset | |Dvorak| | | | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | | | | | | | |
+ * +--------------------/ \--------------------+
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, RESET, DVORAK, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______
+ )
+};
+
+
+uint32_t layer_state_set_user(uint32_t state) {
+ return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+}
+
+// settings for LED on receiver
+void led_init(void) {
+ DDRD |= (1<<1);
+ PORTD |= (1<<1);
+ DDRF |= (1<<4) | (1<<5);
+ PORTF |= (1<<4) | (1<<5);
+}
+
+#define red_led_off PORTF |= (1<<5)
+#define red_led_on PORTF &= ~(1<<5)
+#define blu_led_off PORTF |= (1<<4)
+#define blu_led_on PORTF &= ~(1<<4)
+#define grn_led_off PORTD |= (1<<1)
+#define grn_led_on PORTD &= ~(1<<1)
+
+#define set_led_off red_led_off; grn_led_off; blu_led_off
+#define set_led_red red_led_on; grn_led_off; blu_led_off
+#define set_led_blue red_led_off; grn_led_off; blu_led_on
+#define set_led_green red_led_off; grn_led_on; blu_led_off
+#define set_led_yellow red_led_on; grn_led_on; blu_led_off
+#define set_led_magenta red_led_on; grn_led_off; blu_led_on
+#define set_led_cyan red_led_off; grn_led_on; blu_led_on
+#define set_led_white red_led_on; grn_led_on; blu_led_on
+
+void matrix_init_user(void) {
+ led_init();
+}
+
+void matrix_scan_user(void) {
+ uint8_t layer = biton32(layer_state);
+ uint8_t default_layer = biton32(eeconfig_read_default_layer());
+ switch (layer) {
+ case _LOWER:
+ set_led_red;
+ break;
+ case _RAISE:
+ set_led_blue;
+ break;
+ case _ADJUST:
+ set_led_magenta;
+ break;
+ default:
+ switch (default_layer) {
+ case _COLEMAK:
+ set_led_white;
+ break;
+ case _DVORAK:
+ set_led_yellow;
+ break;
+ default:
+ set_led_green;
+ break;
+ }
+ break;
+ }
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_COLEMAK);
+ }
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_DVORAK);
+ }
+ break;
+ }
+ return true;
+}
diff --git a/keyboards/comet46/keymaps/default-rgbled/readme.md b/keyboards/comet46/keymaps/default-rgbled/readme.md
new file mode 100644
index 000000000..40cc74433
--- /dev/null
+++ b/keyboards/comet46/keymaps/default-rgbled/readme.md
@@ -0,0 +1,3 @@
+## default-led
+
+A keymap that is compatible with mitosis-type receivers, which use RGB LED for layer indication.
diff --git a/keyboards/comet46/keymaps/default/config.h b/keyboards/comet46/keymaps/default/config.h
new file mode 100644
index 000000000..7873cf5a7
--- /dev/null
+++ b/keyboards/comet46/keymaps/default/config.h
@@ -0,0 +1,31 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+// #include "../../config.h"
+
+/* Use I2C or Serial */
+
+#define USE_I2C
+#define SSD1306OLED
+
+#endif
diff --git a/keyboards/comet46/keymaps/default/keymap.c b/keyboards/comet46/keymaps/default/keymap.c
index b03ece4e9..c87492e4b 100644
--- a/keyboards/comet46/keymaps/default/keymap.c
+++ b/keyboards/comet46/keymaps/default/keymap.c
@@ -2,6 +2,10 @@
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
#include QMK_KEYBOARD_H
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
+
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -9,13 +13,18 @@
// entirely and just use numbers.
enum comet46_layers
{
- _QWERTY,
- _LOWER,
- _RAISE,
+ _QWERTY,
+ _COLEMAK,
+ _DVORAK,
+ _LOWER,
+ _RAISE,
+ _ADJUST,
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
LOWER,
RAISE,
};
@@ -46,6 +55,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT
),
+ /* Colemak
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Ctl | A | R | S | T | D | Esc | | Del | H | N | E | I | O | " |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | { | | } | K | M | , | . | / | Shift|
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | GUI | Lower| Space| | Enter| Raise| Alt |
+ * +--------------------/ \--------------------+
+ */
+ [_COLEMAK] = LAYOUT(
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC,
+ KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_ESC, KC_DEL, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT
+ ),
+
+ /* Dvorak
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Ctl | A | O | E | U | I | Esc | | Del | D | H | T | N | S | / |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | { | | } | B | M | W | V | Z | Shift|
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | GUI | Lower| Space| | Enter| Raise| Alt |
+ * +--------------------/ \--------------------+
+ */
+ [_DVORAK] = LAYOUT(
+ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC,
+ KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_ESC, KC_DEL, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH,
+ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LCBR, KC_RCBR, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,
+ KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT
+ ),
+
/* Lower
* ,-----------------------------------------+ +-----------------------------------------.
* | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | |
@@ -70,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
- * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | | | | | |
+ * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | PgDn | PgUp | | | |
* |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
* | | | | | | | |
* +--------------------/ \--------------------+
@@ -78,26 +123,134 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_RAISE] = LAYOUT(
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______,
- _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______,
+ _______, _______, _______, _______, _______, _______
+ ),
+
+ /* Adjust
+ * ,-----------------------------------------+ +-----------------------------------------.
+ * | | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | | | | | |Qwerty| |Colemk| | | | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------|
+ * | | | | | | |Reset | |Dvorak| | | | | | |
+ * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------|
+ * | | | | | | | |
+ * +--------------------/ \--------------------+
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, RESET, DVORAK, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______
)
};
+uint32_t layer_state_set_user(uint32_t state) {
+ return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// You need to add source files to SRC in rules.mk when using OLED display functions
+void set_keylog(uint16_t keycode);
+const char *read_keylog(void);
+const char *read_modifier_state(void);
+const char *read_host_led_state(void);
+
+void matrix_init_user(void) {
+ iota_gfx_init(false); // turns on the display
+}
+
void matrix_scan_user(void) {
- uint8_t layer = biton32(layer_state);
- switch (layer) {
- case _QWERTY:
- set_led_green;
- break;
- case _RAISE:
- set_led_blue;
- break;
- case _LOWER:
- set_led_red;
- break;
+ iota_gfx_task(); // this is what updates the display continuously
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+void render_status(struct CharacterMatrix *matrix) {
+ // Layer state
+ char layer_str[22];
+ matrix_write(matrix, "Layer: ");
+ uint8_t layer = biton32(layer_state);
+ uint8_t default_layer = biton32(eeconfig_read_default_layer());
+ switch (layer) {
+ case _QWERTY:
+ switch (default_layer) {
+ case _QWERTY:
+ snprintf(layer_str, sizeof(layer_str), "Qwerty");
+ break;
+ case _COLEMAK:
+ snprintf(layer_str, sizeof(layer_str), "Colemak");
+ break;
+ case _DVORAK:
+ snprintf(layer_str, sizeof(layer_str), "Dvorak");
+ break;
default:
- set_led_green;
- break;
+ snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
+ break;
+ }
+ break;
+ case _RAISE:
+ snprintf(layer_str, sizeof(layer_str), "Raise");
+ break;
+ case _LOWER:
+ snprintf(layer_str, sizeof(layer_str), "Lower");
+ break;
+ case _ADJUST:
+ snprintf(layer_str, sizeof(layer_str), "Adjust");
+ break;
+ default:
+ snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
+ }
+ matrix_write_ln(matrix, layer_str);
+ // Last entered keycode
+ matrix_write_ln(matrix, read_keylog());
+ // Modifier state
+ matrix_write_ln(matrix, read_modifier_state());
+ // Host Keyboard LED Status
+ matrix_write(matrix, read_host_led_state());
+}
+
+
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+ matrix_clear(&matrix);
+ render_status(&matrix);
+ matrix_update(&display, &matrix);
+}
+
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ #ifdef SSD1306OLED
+ if (record->event.pressed) {
+ set_keylog(keycode);
}
+ #endif
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_COLEMAK);
+ }
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_DVORAK);
+ }
+ break;
+ }
+ return true;
}
diff --git a/keyboards/comet46/keymaps/default/readme.md b/keyboards/comet46/keymaps/default/readme.md
new file mode 100644
index 000000000..b0085d2a6
--- /dev/null
+++ b/keyboards/comet46/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+## default-oled-display
+
+A keymap that is compatible with receivers with an OLED display.
diff --git a/keyboards/comet46/keymaps/default/rules.mk b/keyboards/comet46/keymaps/default/rules.mk
new file mode 100644
index 000000000..3fa01f96a
--- /dev/null
+++ b/keyboards/comet46/keymaps/default/rules.mk
@@ -0,0 +1,5 @@
+# If you want to change display settings of the OLED, you need to change the following lines
+SRC += ./lib/glcdfont.c \
+ ./lib/keylogger.c \
+ ./lib/modifier_state_reader.c \
+ ./lib/host_led_state_reader.c
diff --git a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c b/keyboards/comet46/keymaps/satt/action_pseudo_lut.c
index 5664d4d2a..0ac713359 100644
--- a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c
+++ b/keyboards/comet46/keymaps/satt/action_pseudo_lut.c
@@ -10,133 +10,133 @@ static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE];
* Memo: Using other layer keymap to get keycode
*/
void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) {
- uint8_t prev_shift;
- uint16_t keycode;
- uint16_t pseudo_keycode;
+ uint8_t prev_shift;
+ uint16_t keycode;
+ uint16_t pseudo_keycode;
- /* get keycode from keymap you specified */
- keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
+ /* get keycode from keymap you specified */
+ keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
- prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+ prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
- if (record->event.pressed) {
- /* when magic commands entered, keycode does not converted */
- if (IS_COMMAND()) {
- if (prev_shift) {
- add_shift_bit(keycode);
- }
- register_code(keycode);
- return;
- }
+ if (record->event.pressed) {
+ /* when magic commands entered, keycode does not converted */
+ if (IS_COMMAND()) {
+ if (prev_shift) {
+ add_shift_bit(keycode);
+ }
+ register_code(keycode);
+ return;
+ }
- if (prev_shift) {
- pseudo_keycode = convert_keycode(keymap, keycode, true);
- dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
- add_shift_bit(keycode);
+ if (prev_shift) {
+ pseudo_keycode = convert_keycode(keymap, keycode, true);
+ dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+ add_shift_bit(keycode);
- if (IS_LSFT(pseudo_keycode)) {
- register_code(QK_LSFT ^ pseudo_keycode);
- } else {
- /* delete shift mod temporarily */
- del_mods(prev_shift);
- send_keyboard_report();
- register_code(pseudo_keycode);
- add_mods(prev_shift);
- send_keyboard_report();
- }
- } else {
- pseudo_keycode = convert_keycode(keymap, keycode, false);
- dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+ if (IS_LSFT(pseudo_keycode)) {
+ register_code(QK_LSFT ^ pseudo_keycode);
+ } else {
+ /* delete shift mod temporarily */
+ del_mods(prev_shift);
+ send_keyboard_report();
+ register_code(pseudo_keycode);
+ add_mods(prev_shift);
+ send_keyboard_report();
+ }
+ } else {
+ pseudo_keycode = convert_keycode(keymap, keycode, false);
+ dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
- if (IS_LSFT(pseudo_keycode)) {
- add_weak_mods(MOD_BIT(KC_LSFT));
- send_keyboard_report();
- register_code(QK_LSFT ^ pseudo_keycode);
- /* on Windows, prevent key repeat to avoid unintended output */
- unregister_code(QK_LSFT ^ pseudo_keycode);
- del_weak_mods(MOD_BIT(KC_LSFT));
- send_keyboard_report();
- } else {
- register_code(pseudo_keycode);
- }
- }
+ if (IS_LSFT(pseudo_keycode)) {
+ add_weak_mods(MOD_BIT(KC_LSFT));
+ send_keyboard_report();
+ register_code(QK_LSFT ^ pseudo_keycode);
+ /* on Windows, prevent key repeat to avoid unintended output */
+ unregister_code(QK_LSFT ^ pseudo_keycode);
+ del_weak_mods(MOD_BIT(KC_LSFT));
+ send_keyboard_report();
+ } else {
+ register_code(pseudo_keycode);
+ }
+ }
+ } else {
+ if (get_shift_bit(keycode)) {
+ del_shift_bit(keycode);
+ pseudo_keycode = convert_keycode(keymap, keycode, true);
} else {
- if (get_shift_bit(keycode)) {
- del_shift_bit(keycode);
- pseudo_keycode = convert_keycode(keymap, keycode, true);
- } else {
- pseudo_keycode = convert_keycode(keymap, keycode, false);
- }
- dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
+ pseudo_keycode = convert_keycode(keymap, keycode, false);
+ }
+ dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
- if (IS_LSFT(pseudo_keycode)) {
- unregister_code(QK_LSFT ^ pseudo_keycode);
- } else {
- unregister_code(pseudo_keycode);
- }
+ if (IS_LSFT(pseudo_keycode)) {
+ unregister_code(QK_LSFT ^ pseudo_keycode);
+ } else {
+ unregister_code(pseudo_keycode);
}
+ }
}
uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded)
{
- uint16_t pseudo_keycode;
+ uint16_t pseudo_keycode;
- switch (keycode) {
- case KC_A ... KC_CAPSLOCK:
-#if defined(__AVR__)
- if (shift_modded) {
- pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
- } else {
- pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
- }
-#else
- if (shift_modded) {
- pseudo_keycode = keymap[keycode][1];
- } else {
- pseudo_keycode = keymap[keycode][0];
- }
-#endif
- /* if undefined, use got keycode as it is */
- if (pseudo_keycode == 0x00) {
- if (shift_modded) {
- pseudo_keycode = S(keycode);
- } else {
- pseudo_keycode = keycode;
- }
- }
- break;
- default:
- if (shift_modded) {
- pseudo_keycode = S(keycode);
- } else {
- pseudo_keycode = keycode;
- }
- break;
- }
- return pseudo_keycode;
+ switch (keycode) {
+ case KC_A ... KC_CAPSLOCK:
+ #if defined(__AVR__)
+ if (shift_modded) {
+ pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
+ } else {
+ pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
+ }
+ #else
+ if (shift_modded) {
+ pseudo_keycode = keymap[keycode][1];
+ } else {
+ pseudo_keycode = keymap[keycode][0];
+ }
+ #endif
+ /* if undefined, use got keycode as it is */
+ if (pseudo_keycode == 0x00) {
+ if (shift_modded) {
+ pseudo_keycode = S(keycode);
+ } else {
+ pseudo_keycode = keycode;
+ }
+ }
+ break;
+ default:
+ if (shift_modded) {
+ pseudo_keycode = S(keycode);
+ } else {
+ pseudo_keycode = keycode;
+ }
+ break;
+ }
+ return pseudo_keycode;
}
uint8_t get_shift_bit(uint16_t keycode) {
- if ((keycode >> 3) < SHIFT_BIT_SIZE) {
- return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
- } else {
- dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
- return 0;
- }
+ if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+ return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
+ } else {
+ dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
+ return 0;
+ }
}
void add_shift_bit(uint16_t keycode) {
- if ((keycode >> 3) < SHIFT_BIT_SIZE) {
- send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
- } else {
- dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
- }
+ if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+ send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
+ } else {
+ dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
+ }
}
void del_shift_bit(uint16_t keycode) {
- if ((keycode >> 3) < SHIFT_BIT_SIZE) {
- send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
- } else {
- dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
- }
+ if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+ send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
+ } else {
+ dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
+ }
}
diff --git a/keyboards/comet46/keymaps/satt/config.h b/keyboards/comet46/keymaps/satt/config.h
new file mode 100644
index 000000000..c99de2cf8
--- /dev/null
+++ b/keyboards/comet46/keymaps/satt/config.h
@@ -0,0 +1,34 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+)
+
+/* Use I2C or Serial */
+
+#define USE_I2C
+#define SSD1306OLED
+
+#endif
diff --git a/keyboards/comet46/keymaps/satt/keymap.c b/keyboards/comet46/keymaps/satt/keymap.c
index 7e728e5d0..eec40eff4 100644
--- a/keyboards/comet46/keymaps/satt/keymap.c
+++ b/keyboards/comet46/keymaps/satt/keymap.c
@@ -4,64 +4,96 @@
#include QMK_KEYBOARD_H
#include "keymap_jis2us.h"
#include "action_pseudo_lut.h"
+#include "keymap_jp.h"
+#ifdef SSD1306OLED
+ #include "ssd1306.h"
+#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum comet46_layers {
- _QWERTY,
- _LOWER,
- _RAISE,
- _PSEUDO_US,
- _PSEUDO_US_LOWER,
- _PSEUDO_US_RAISE,
- _ADJUST
+ _QWERTY,
+ _LOWER,
+ _RAISE,
+ _PSEUDO_US,
+ _PSEUDO_US_LOWER,
+ _PSEUDO_US_RAISE,
+ _ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
PSEUDO_US,
+ JIS2US,
};
-#define KC_LWR MO(_LOWER)
-#define KC_RSE MO(_RAISE)
+// JIS keycodes
+#define KC_JZHT JP_ZHTG // hankaku/zenkaku|kanzi
+#define KC_JCIR JP_CIRC // ^, ~
+#define KC_JAT JP_AT // @, `
+#define KC_JLBR JP_LBRC // [, {
+#define KC_JCOL JP_COLN // :, *
+#define KC_JRBR JP_RBRC // ], }
+#define KC_JBSL JP_BSLS // \, _
+#define KC_JMHE JP_MHEN // muhenkan
+#define KC_JHEN JP_HENK // henkan
+#define KC_JKAN JP_KANA // katakana/hiragana|ro-mazi
+#define KC_JMKA JP_MKANA //kana on MacOSX
+#define KC_JMEI JP_MEISU //eisu on MacOSX
+#define KC_JAMP JP_AMPR // &
+#define KC_JQUO JP_QUOT // '
+#define KC_JLPR JP_LPRN // (
+#define KC_JRPR JP_RPRN // )
+#define KC_JEQL JP_EQL // =
+#define KC_JTIL JP_TILD // ~
+#define KC_JPIP JP_PIPE // |
+#define KC_JGRV JP_GRV // `
+#define KC_JLCB JP_LCBR // {
+#define KC_JPLU JP_PLUS // +
+#define KC_JAST JP_ASTR // *
+#define KC_JRCB JP_RCBR // }
+#define KC_JUND JP_UNDS // _
+
+// Layer related keycodes
+#define KC_LWR MO(_LOWER)
+#define KC_RSE MO(_RAISE)
#define KC_P_LW MO(_PSEUDO_US_LOWER)
#define KC_P_RS MO(_PSEUDO_US_RAISE)
#define KC_QWRT QWERTY
#define KC_P_US PSEUDO_US
+#define KC_J2US JIS2US
+
+// Special keycodes
#define KC_SPCT CTL_T(KC_SPC)
#define KC_ENSF SFT_T(KC_ENT)
-#define KC_SFTA SFT_T(KC_A)
-#define KC_CTSF S(KC_LCTL)
+#define KC_CAEC MT(MOD_LCTL | MOD_LALT, KC_ESC)
+#define KC_CSTB C_S_T(KC_TAB)
#define KC_IMON ALT_T(KC_F13)
#define KC_IMOF GUI_T(KC_F14)
-#define KC_SRO S(KC_RO)
-#define KC_SYEN S(KC_JYEN)
#define KC_CAD LCA(KC_DEL)
#define KC_RST RESET
-#define LONGPRESS_DELAY 150
-
// Fillers to make layering more clear
-#define KC_ KC_TRNS
+#define KC_ KC_TRNS
#define KC_XXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [_QWERTY] = LAYOUT_kc(
+ [_QWERTY] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
- ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL ,
+ CAEC, Q , W , E , R , T , Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
- TAB ,SFTA, S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,BSPC,
+ CSTB, A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- CTSF, Z , X , C , V , B ,LBRC, RBRC, N , M ,COMM,DOT ,SLSH,QUOT,
+ LSFT, Z , X , C , V , B ,LBRC, RBRC, N , M ,COMM,DOT ,SLSH,QUOT,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
IMOF,LWR ,SPCT, ENSF,RSE ,IMON
// +----+----+---/ \---+----+----+
),
- [_LOWER] = LAYOUT_kc(
+ [_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
@@ -69,60 +101,60 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, F7 , F8 , F9 , F10, F11, F12, TILD,PIPE,UNDS,PLUS,LCBR,RCBR, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , , , , ,
+ , , , , ,
// +----+----+---/ \---+----+----+
),
- [_RAISE] = LAYOUT_kc(
+ [_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
, , , , , , , XXXX,LEFT,DOWN, UP ,RGHT,END , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, ,
+ , , , , , , , HOME,XXXX,PGDN,PGUP,XXXX,XXXX, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , , , , ,
+ , , , , ,
// +----+----+---/ \---+----+----+
),
- [_PSEUDO_US] = LAYOUT_kc(
+ [_PSEUDO_US] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
- ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL ,
+ CAEC, Q , W , E , R , T , Y , U , I , O , P ,DEL ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
- TAB ,SFTA, S , D , F , G ,ASTR, LPRN, H , J , K , L ,FN0 ,BSPC,
+ CSTB, A , S , D , F , G ,JLPR, JRPR, H , J , K , L ,J2US,BSPC,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- CTSF, Z , X , C , V , B ,FN0 , FN0 , N , M ,COMM,DOT ,SLSH,FN0 ,
+ LSFT, Z , X , C , V , B ,J2US, J2US, N , M ,COMM,DOT ,SLSH,J2US,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
IMOF,P_LW,SPCT, ENSF,P_RS,IMON
// +----+----+---/ \---+----+----+
),
- [_PSEUDO_US_LOWER] = LAYOUT_kc(
+ [_PSEUDO_US_LOWER] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
- ,EXLM,LBRC,HASH,DLR ,PERC, EQL ,CIRC, DQT,ASTR,LPRN, ,
+ ,EXLM,JAT ,HASH,DLR ,PERC, JCIR,JAMP,JAST,JLPR,JRPR, ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
- , F1 , F2 , F3 , F4 , F5 , F6 , LCBR,JYEN,MINS,UNDS,RBRC,BSLS, ,
+ , F1 , F2 , F3 , F4 , F5 , F6 , JGRV,JBSL,MINS,JEQL,JLBR,JRBR, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , F7 , F8 , F9 , F10, F11, F12, PLUS,SYEN,SRO ,COLN,RCBR,PIPE, ,
+ , F7 , F8 , F9 , F10, F11, F12, JTIL,JPIP,JUND,JPLU,JLCB,JRCB, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , , , , ,
+ , , , , ,
// +----+----+---/ \---+----+----+
),
- [_PSEUDO_US_RAISE] = LAYOUT_kc(
+ [_PSEUDO_US_RAISE] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
- , , , , , , GRV, XXXX,LEFT,DOWN, UP ,RGHT,END , ,
+ , , , , , ,JZHT, XXXX,LEFT,DOWN, UP ,RGHT,END , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, ,
+ , , , , , , , HOME,XXXX,PGDN,PGUP,XXXX,XXXX, ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , , , , ,
+ , , , , ,
// +----+----+---/ \---+----+----+
),
- [_ADJUST] = LAYOUT_kc(
+ [_ADJUST] = LAYOUT_kc(
//,----+----+----+----+----+----+ +----+----+----+----+----+----.
, , , , , , , , , , , ,
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----|
@@ -130,90 +162,130 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
, , , , , ,RST , P_US, , , , , , ,
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
- , , , , ,
+ , , , , ,
// +----+----+---/ \---+----+----+
)
};
+uint32_t layer_state_set_user(uint32_t state) {
+ switch (biton32(state)) {
+ case _PSEUDO_US_LOWER:
+ case _PSEUDO_US_RAISE:
+ return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
+ break;
+ default:
+ return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+ break;
+ }
+}
-/*
- * user defined action function
- */
-enum function_id {
- PSEUDO_US_FUNCTION,
-};
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch (id)
- {
- case PSEUDO_US_FUNCTION:
- action_pseudo_lut(record, _QWERTY, keymap_jis2us);
- break;
- }
-}
+// You need to add source files to SRC in rules.mk when using OLED display functions
+void set_keylog(uint16_t keycode);
+const char *read_keylog(void);
+const char *read_modifier_state(void);
+const char *read_host_led_state(void);
-/*
- * Fn action definition
- */
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_FUNCTION(PSEUDO_US_FUNCTION),
-};
+void matrix_init_user(void) {
+ iota_gfx_init(false); // turns on the display
+}
void matrix_scan_user(void) {
- uint8_t layer = biton32(layer_state);
+ iota_gfx_task(); // this is what updates the display continuously
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+void render_status(struct CharacterMatrix *matrix) {
+ // Layer state
+ char layer_str[22];
+ matrix_write(matrix, "Layer: ");
+ uint8_t layer = biton32(layer_state);
+ uint8_t default_layer = biton32(eeconfig_read_default_layer());
switch (layer) {
- case _LOWER:
- set_led_red;
- break;
+ case _QWERTY:
+ switch (default_layer) {
+ case _QWERTY:
+ snprintf(layer_str, sizeof(layer_str), "Qwerty");
+ break;
+ case _PSEUDO_US:
+ snprintf(layer_str, sizeof(layer_str), "Psuedo_US");
+ break;
+ default:
+ snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
+ break;
+ }
+ break;
case _RAISE:
- set_led_blue;
- break;
- case _PSEUDO_US_LOWER:
- set_led_yellow;
- break;
+ snprintf(layer_str, sizeof(layer_str), "Raise");
+ break;
+ case _LOWER:
+ snprintf(layer_str, sizeof(layer_str), "Lower");
+ break;
case _PSEUDO_US_RAISE:
- set_led_cyan;
- break;
+ snprintf(layer_str, sizeof(layer_str), "P_US_Raise");
+ break;
+ case _PSEUDO_US_LOWER:
+ snprintf(layer_str, sizeof(layer_str), "P_US_Lower");
+ break;
case _ADJUST:
- set_led_magenta;
- break;
+ snprintf(layer_str, sizeof(layer_str), "Adjust");
+ break;
default:
- set_led_green;
- break;
+ snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
}
-};
+ matrix_write_ln(matrix, layer_str);
+ // Last entered keycode
+ matrix_write_ln(matrix, read_keylog());
+ // Modifier state
+ matrix_write_ln(matrix, read_modifier_state());
+ // Host Keyboard LED Status
+ matrix_write(matrix, read_host_led_state());
+}
-uint32_t layer_state_set_user(uint32_t state) {
- switch (biton32(state)) {
- case _PSEUDO_US:
- return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
- break;
- case _PSEUDO_US_LOWER:
- return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
- break;
- case _PSEUDO_US_RAISE:
- return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
- break;
- default:
- return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
- break;
+void iota_gfx_task_user(void) {
+ struct CharacterMatrix matrix;
+
+#if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
}
+#endif
+
+ matrix_clear(&matrix);
+ render_status(&matrix);
+ matrix_update(&display, &matrix);
}
+#endif//SSD1306OLED
+
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ #ifdef SSD1306OLED
+ if (record->event.pressed) {
+ set_keylog(keycode);
+ }
+ #endif
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
- return false;
break;
case PSEUDO_US:
if (record->event.pressed) {
set_single_persistent_default_layer(_PSEUDO_US);
}
- return false;
+ break;
+ case JIS2US:
+ action_pseudo_lut(record, _QWERTY, keymap_jis2us);
break;
}
return true;
diff --git a/keyboards/comet46/keymaps/satt/keymap_jis2us.h b/keyboards/comet46/keymaps/satt/keymap_jis2us.h
index cf2bd4f0e..e32a0579a 100644
--- a/keyboards/comet46/keymaps/satt/keymap_jis2us.h
+++ b/keyboards/comet46/keymaps/satt/keymap_jis2us.h
@@ -3,30 +3,30 @@
/* keymap for convert from JIS to US */
const uint16_t PROGMEM keymap_jis2us[][2] = {
- [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
+ [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
- [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */
- [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */
- [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */
- [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */
- [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */
- [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */
- [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */
- [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */
- [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */
- [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */
- [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */
- [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */
- [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */
- [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */
- [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
- [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
- [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */
- [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */
- [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */
- [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */
- [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */
- [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */
+ [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */
+ [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */
+ [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */
+ [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */
+ [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */
+ [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */
+ [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */
+ [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */
+ [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */
+ [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */
+ [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */
+ [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */
+ [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */
+ [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */
+ [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
+ [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
+ [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */
+ [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */
+ [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */
+ [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */
+ [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */
+ [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */
};
#endif
diff --git a/keyboards/comet46/keymaps/satt/rules.mk b/keyboards/comet46/keymaps/satt/rules.mk
index dc4355c78..5839b778b 100644
--- a/keyboards/comet46/keymaps/satt/rules.mk
+++ b/keyboards/comet46/keymaps/satt/rules.mk
@@ -1,26 +1,7 @@
SRC += action_pseudo_lut.c
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-ONEHAND_ENABLE = no # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+# If you want to change display settings of the OLED, you need to change the following lines
+SRC += ./lib/glcdfont.c \
+ ./lib/keylogger.c \
+ ./lib/modifier_state_reader.c \
+ ./lib/host_led_state_reader.c
diff --git a/keyboards/comet46/lib/glcdfont.c b/keyboards/comet46/lib/glcdfont.c
new file mode 100644
index 000000000..e912d2233
--- /dev/null
+++ b/keyboards/comet46/lib/glcdfont.c
@@ -0,0 +1,148 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+
+const unsigned char font[] PROGMEM = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+ 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+ 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+ 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+ 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+ 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+ 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+ 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+ 0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+ 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+ 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+ 0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+ 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+ 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+ 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+ 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+ 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+ 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+ 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+ 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+ 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+ 0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+ 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+ 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+ 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+ 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+ 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+ 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+ 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+ 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+ 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+ 0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+ 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+ 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+ 0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+ 0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+ 0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+ 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+ 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+ 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+ 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+ 0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+ 0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+ 0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+ 0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+ 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+ 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+ 0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+ 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+ 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+ 0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+ 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+ 0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+ 0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+ 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+ 0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+ 0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+ 0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+ 0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+ 0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+ 0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+ 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+ 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+ 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+ 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+ 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+ 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+ 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+ 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+ 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+ 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+ 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+ 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+ 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+ 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+ 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+ 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+ 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+ 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+ 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+ 0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+ 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+ 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+ 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+ 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+ 0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+ 0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+ 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+ 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+ 0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+ 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+ 0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+ 0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+ 0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+ 0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+ 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+ 0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+ 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+ 0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+ 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+ 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
+ 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+ 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+ 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+ 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+ 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+ 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+ 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+ 0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+ 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
+ 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
+ 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+ 0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+ 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+ 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+ 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+ 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+ 0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+ 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+ 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+ 0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+ 0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+ 0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+ 0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+ 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00
+};
+#endif // FONT5X7_H
diff --git a/keyboards/comet46/lib/host_led_state_reader.c b/keyboards/comet46/lib/host_led_state_reader.c
new file mode 100644
index 000000000..864b1e244
--- /dev/null
+++ b/keyboards/comet46/lib/host_led_state_reader.c
@@ -0,0 +1,15 @@
+#include <stdio.h>
+#include "comet46.h"
+
+char host_led_state_str[22];
+
+const char *read_host_led_state(void) {
+ uint8_t leds = host_keyboard_leds();
+
+ snprintf(host_led_state_str, sizeof(host_led_state_str), "Lock: %s%s%s",
+ (leds & (1 << USB_LED_CAPS_LOCK)) ? "CAPL " : "",
+ (leds & (1 << USB_LED_SCROLL_LOCK)) ? "SCRL " : "",
+ (leds & (1 << USB_LED_NUM_LOCK)) ? "NUML" : "");
+
+ return host_led_state_str;
+}
diff --git a/keyboards/comet46/lib/keylogger.c b/keyboards/comet46/lib/keylogger.c
new file mode 100644
index 000000000..184f60109
--- /dev/null
+++ b/keyboards/comet46/lib/keylogger.c
@@ -0,0 +1,294 @@
+#include <stdio.h>
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+#define NUM_USB_HID_KEYCODES 255
+#define LEN_KEYCODE_STR 4
+
+char keylog[22] = {"KC: ID: "};
+
+// Quick and dirty way to display USB HID keycodes used in QMK
+// USB HID keycodes from 0x0000 to 0x00FF are stored in a 4x256+1 length char
+const char code_to_name[] PROGMEM = {
+ "NO " //0x00
+ "TRNS"
+ "? "
+ "? "
+ "A "
+ "B "
+ "C "
+ "D "
+ "E "
+ "F "
+ "G "
+ "H "
+ "I "
+ "J "
+ "K "
+ "L "
+ "M " //0x10
+ "N "
+ "O "
+ "P "
+ "Q "
+ "R "
+ "S "
+ "T "
+ "U "
+ "V "
+ "W "
+ "X "
+ "Y "
+ "Z "
+ "1 "
+ "2 "
+ "3 " //0x20
+ "4 "
+ "5 "
+ "6 "
+ "7 "
+ "8 "
+ "9 "
+ "0 "
+ "ENT "
+ "ESC "
+ "BSPC"
+ "TAB "
+ "SPC "
+ "MINS"
+ "EQL "
+ "LBRC"
+ "RBRC" //0x30
+ "BSLS"
+ "NUHS"
+ "SCLN"
+ "QUOT"
+ "GRV "
+ "COMM"
+ "DOT "
+ "SLSH"
+ "CAPS"
+ "F1 "
+ "F2 "
+ "F3 "
+ "F4 "
+ "F5 "
+ "F6 "
+ "F7 " //0x40
+ "F8 "
+ "F9 "
+ "F10 "
+ "F11 "
+ "F12 "
+ "PSCR"
+ "SLCK"
+ "PAUS"
+ "INS "
+ "HOME"
+ "PGUP"
+ "DEL "
+ "END "
+ "PGDN"
+ "RGHT"
+ "LEFT" //0x50
+ "DOWN"
+ "UP "
+ "NLCK"
+ "PSLS"
+ "PAST"
+ "PMNS"
+ "PPLS"
+ "PENT"
+ "P1 "
+ "P2 "
+ "P3 "
+ "P4 "
+ "P5 "
+ "P6 "
+ "P7 "
+ "P8 " //0x60
+ "P9 "
+ "P0 "
+ "PDOT"
+ "NUBS"
+ "APP "
+ "POW "
+ "PEQL"
+ "F13 "
+ "F14 "
+ "F15 "
+ "F16 "
+ "F17 "
+ "F18 "
+ "F19 "
+ "F20 "
+ "F21 " //0x70
+ "F22 "
+ "F23 "
+ "F24 "
+ "EXEC"
+ "HELP"
+ "MENU"
+ "SLCT"
+ "STOP"
+ "AGIN"
+ "UNDO"
+ "CUT "
+ "COPY"
+ "PSTE"
+ "FIND"
+ "_MUT"
+ "_VUP" //0x80
+ "_VDN"
+ "LCAP"
+ "LNUM"
+ "LSCR"
+ "PCMM"
+ "PEQA"
+ "INT1"
+ "INT2"
+ "INT3"
+ "INT4"
+ "INT5"
+ "INT6"
+ "INT7"
+ "INT8"
+ "INT9"
+ "LAN1" //0x90
+ "LAN2"
+ "LAN3"
+ "LAN4"
+ "LAN5"
+ "LAN6"
+ "LAN7"
+ "LAN8"
+ "LAN9"
+ "ERAS"
+ "SYSR"
+ "CNCL"
+ "CLR "
+ "PRIR"
+ "RTRN"
+ "SEP "
+ "OUT " //0xA0
+ "OPER"
+ "CLRA"
+ "CSEL"
+ "ESEL"
+ "PWR " //0xA5
+ "SLEP"
+ "WAKE"
+ "MUTE"
+ "VOLU"
+ "VOLD"
+ "MNXT"
+ "MPRV"
+ "MSTP"
+ "MPLY"
+ "MSEL"
+ "EJCT" //0xB0
+ "MAIL"
+ "CALC"
+ "MYCM"
+ "WSCH"
+ "WHOM"
+ "WBAK"
+ "WFWD"
+ "WSTP"
+ "WREF"
+ "WFAV"
+ "MFFD"
+ "MRWD"
+ "BRIU"
+ "BRID"
+ "? "
+ "FN0 " //0xC0
+ "FN1 "
+ "FN2 "
+ "FN3 "
+ "FN4 "
+ "FN5 "
+ "FN6 "
+ "FN7 "
+ "FN8 "
+ "FN9 "
+ "FN10"
+ "FN11"
+ "FN12"
+ "FN13"
+ "FN14"
+ "FN15"
+ "FN16" //0xD0
+ "FN17"
+ "FN18"
+ "FN19"
+ "FN20"
+ "FN21"
+ "FN22"
+ "FN23"
+ "FN24"
+ "FN25"
+ "FN26"
+ "FN27"
+ "FN28"
+ "FN29"
+ "FN30"
+ "FN31"
+ "LCTL" //0xE0
+ "LSFT"
+ "LALT"
+ "LGUI"
+ "RCTL"
+ "RSFT"
+ "RALT"
+ "RGUI"
+ "? "
+ "? "
+ "? "
+ "? "
+ "? "
+ "? "
+ "? "
+ "? "
+ "MS_U" //0xF0
+ "MS_D"
+ "MS_L"
+ "MS_R"
+ "BTN1"
+ "BTN2"
+ "BTN3"
+ "BTN4"
+ "BTN5"
+ "WH_U"
+ "WH_D"
+ "WH_L"
+ "WH_R"
+ "ACL0"
+ "ACL1"
+ "ACL2"
+};
+
+void set_keylog(uint16_t keycode)
+{
+ char name[LEN_KEYCODE_STR+1] = "? ";
+
+ if (keycode <= NUM_USB_HID_KEYCODES) {
+ for (uint8_t k = 0; k < LEN_KEYCODE_STR; k++) {
+ name[k] = pgm_read_byte_near(code_to_name + keycode * LEN_KEYCODE_STR + k);
+ }
+ } else if (keycode > NUM_USB_HID_KEYCODES) {
+ snprintf(name, sizeof(name), "QMK ");
+ }
+
+ // update keylog
+ snprintf(keylog, sizeof(keylog), "KC: %s ID: %d", name, keycode);
+}
+
+const char *read_keylog(void) {
+ return keylog;
+}
diff --git a/keyboards/comet46/lib/modifier_state_reader.c b/keyboards/comet46/lib/modifier_state_reader.c
new file mode 100644
index 000000000..518eef92a
--- /dev/null
+++ b/keyboards/comet46/lib/modifier_state_reader.c
@@ -0,0 +1,18 @@
+#include <stdio.h>
+#include "comet46.h"
+
+char modifier_state_str[22];
+
+const char *read_modifier_state(void) {
+ uint8_t modifiers = get_mods();
+ uint8_t one_shot = get_oneshot_mods();
+
+ snprintf(modifier_state_str, sizeof(modifier_state_str), "Mod: %s%s%s%s",
+ (modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL " : "",
+ (modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI " : "",
+ (modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT " : "",
+ (modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : ""
+ );
+
+ return modifier_state_str;
+}
diff --git a/keyboards/comet46/readme.md b/keyboards/comet46/readme.md
index 8df27183d..3db64d291 100644
--- a/keyboards/comet46/readme.md
+++ b/keyboards/comet46/readme.md
@@ -1,6 +1,6 @@
# Comet46
-![Comet46](https://user-images.githubusercontent.com/39004890/42418180-d5bb188c-82d5-11e8-99fa-65020ce5ac5d.jpg)
+![Comet46](https://user-images.githubusercontent.com/39004890/50396817-a1660600-07af-11e9-8611-3156c635db43.jpg)
A split wireless 40% column-staggered keyboard
@@ -13,4 +13,5 @@ Make example for this keyboard (after setting up your build environment):
make comet46:default
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk
index 648b8b200..897cc9b8c 100644
--- a/keyboards/comet46/rules.mk
+++ b/keyboards/comet46/rules.mk
@@ -1,12 +1,8 @@
-
-OPT_DEFS += -DCOMET46_ORTHO_===PROMICRO
-COMET46_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
- avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
-
# # project specific files
-SRC = matrix.c
-
-
+SRC += matrix.c \
+ i2c.c \
+ ssd1306.c
+
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
@@ -24,8 +20,6 @@ MCU = atmega32u4
# software delays.
F_CPU = 16000000
-
-#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
@@ -48,7 +42,7 @@ F_USB = $(F_CPU)
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
+# BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
diff --git a/keyboards/comet46/ssd1306.c b/keyboards/comet46/ssd1306.c
new file mode 100644
index 000000000..4330c8497
--- /dev/null
+++ b/keyboards/comet46/ssd1306.c
@@ -0,0 +1,344 @@
+#ifdef SSD1306OLED
+
+#include "ssd1306.h"
+#include "i2c.h"
+#include <string.h>
+#include "print.h"
+#ifdef ADAFRUIT_BLE_ENABLE
+#include "adafruit_ble.h"
+#endif
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#endif
+#include "sendchar.h"
+#include "timer.h"
+
+static const unsigned char font[] PROGMEM;
+
+// Set this to 1 to help diagnose early startup problems
+// when testing power-on with ble. Turn it off otherwise,
+// as the latency of printing most of the debug info messes
+// with the matrix scan, causing keys to drop.
+#define DEBUG_TO_SCREEN 0
+
+//static uint16_t last_battery_update;
+//static uint32_t vbat;
+//#define BatteryUpdateInterval 10000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535
+#define ScreenOffInterval 60000 /* milliseconds */
+#if DEBUG_TO_SCREEN
+static uint8_t displaying;
+#endif
+static uint16_t last_flush;
+
+static bool force_dirty = true;
+
+// Write command sequence.
+// Returns true on success.
+static inline bool _send_cmd1(uint8_t cmd) {
+ bool res = false;
+
+ if (i2c_start_write(SSD1306_ADDRESS)) {
+ xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
+ goto done;
+ }
+
+ if (i2c_master_write(0x0 /* command byte follows */)) {
+ print("failed to write control byte\n");
+
+ goto done;
+ }
+
+ if (i2c_master_write(cmd)) {
+ xprintf("failed to write command %d\n", cmd);
+ goto done;
+ }
+ res = true;
+done:
+ i2c_master_stop();
+ return res;
+}
+
+// Write 2-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
+ if (!_send_cmd1(cmd)) {
+ return false;
+ }
+ return _send_cmd1(opr);
+}
+
+// Write 3-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
+ if (!_send_cmd1(cmd)) {
+ return false;
+ }
+ if (!_send_cmd1(opr1)) {
+ return false;
+ }
+ return _send_cmd1(opr2);
+}
+
+#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
+#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
+#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+
+static void clear_display(void) {
+ matrix_clear(&display);
+
+ // Clear all of the display bits (there can be random noise
+ // in the RAM on startup)
+ send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+ send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+ if (i2c_start_write(SSD1306_ADDRESS)) {
+ goto done;
+ }
+ if (i2c_master_write(0x40)) {
+ // Data mode
+ goto done;
+ }
+ for (uint8_t row = 0; row < MatrixRows; ++row) {
+ for (uint8_t col = 0; col < DisplayWidth; ++col) {
+ i2c_master_write(0);
+ }
+ }
+
+ display.dirty = false;
+
+done:
+ i2c_master_stop();
+}
+
+#if DEBUG_TO_SCREEN
+#undef sendchar
+static int8_t capture_sendchar(uint8_t c) {
+ sendchar(c);
+ iota_gfx_write_char(c);
+
+ if (!displaying) {
+ iota_gfx_flush();
+ }
+ return 0;
+}
+#endif
+
+bool iota_gfx_init(bool rotate) {
+ bool success = false;
+
+ i2c_master_init();
+ send_cmd1(DisplayOff);
+ send_cmd2(SetDisplayClockDiv, 0x80);
+ send_cmd2(SetMultiPlex, DisplayHeight - 1);
+
+ send_cmd2(SetDisplayOffset, 0);
+
+
+ send_cmd1(SetStartLine | 0x0);
+ send_cmd2(SetChargePump, 0x14 /* Enable */);
+ send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+
+ if(rotate){
+ // the following Flip the display orientation 180 degrees
+ send_cmd1(SegRemap);
+ send_cmd1(ComScanInc);
+ }else{
+ // Flips the display orientation 0 degrees
+ send_cmd1(SegRemap | 0x1);
+ send_cmd1(ComScanDec);
+ }
+
+ send_cmd2(SetComPins, 0x2);
+ send_cmd2(SetContrast, 0x8f);
+ send_cmd2(SetPreCharge, 0xf1);
+ send_cmd2(SetVComDetect, 0x40);
+ send_cmd1(DisplayAllOnResume);
+ send_cmd1(NormalDisplay);
+ send_cmd1(DeActivateScroll);
+ send_cmd1(DisplayOn);
+
+ send_cmd2(SetContrast, 0); // Dim
+
+ clear_display();
+
+ success = true;
+
+ iota_gfx_flush();
+
+#if DEBUG_TO_SCREEN
+ print_set_sendchar(capture_sendchar);
+#endif
+
+done:
+ return success;
+}
+
+bool iota_gfx_off(void) {
+ bool success = false;
+
+ send_cmd1(DisplayOff);
+ success = true;
+
+done:
+ return success;
+}
+
+bool iota_gfx_on(void) {
+ bool success = false;
+
+ send_cmd1(DisplayOn);
+ success = true;
+
+done:
+ return success;
+}
+
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+ *matrix->cursor = c;
+ ++matrix->cursor;
+
+ if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+ // We went off the end; scroll the display upwards by one line
+ memmove(&matrix->display[0], &matrix->display[1],
+ MatrixCols * (MatrixRows - 1));
+ matrix->cursor = &matrix->display[MatrixRows - 1][0];
+ memset(matrix->cursor, ' ', MatrixCols);
+ }
+}
+
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+ matrix->dirty = true;
+
+ if (c == '\n') {
+ // Clear to end of line from the cursor and then move to the
+ // start of the next line
+ uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+
+ while (cursor_col++ < MatrixCols) {
+ matrix_write_char_inner(matrix, ' ');
+ }
+ return;
+ }
+
+ matrix_write_char_inner(matrix, c);
+}
+
+void iota_gfx_write_char(uint8_t c) {
+ matrix_write_char(&display, c);
+}
+
+void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+ const char *end = data + strlen(data);
+ while (data < end) {
+ matrix_write_char(matrix, *data);
+ ++data;
+ }
+}
+
+void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
+ char data_ln[strlen(data)+2];
+ snprintf(data_ln, sizeof(data_ln), "%s\n", data);
+ matrix_write(matrix, data_ln);
+}
+
+void iota_gfx_write(const char *data) {
+ matrix_write(&display, data);
+}
+
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+ while (true) {
+ uint8_t c = pgm_read_byte(data);
+ if (c == 0) {
+ return;
+ }
+ matrix_write_char(matrix, c);
+ ++data;
+ }
+}
+
+void iota_gfx_write_P(const char *data) {
+ matrix_write_P(&display, data);
+}
+
+void matrix_clear(struct CharacterMatrix *matrix) {
+ memset(matrix->display, ' ', sizeof(matrix->display));
+ matrix->cursor = &matrix->display[0][0];
+ matrix->dirty = true;
+}
+
+void iota_gfx_clear_screen(void) {
+ matrix_clear(&display);
+}
+
+void matrix_render(struct CharacterMatrix *matrix) {
+ last_flush = timer_read();
+ iota_gfx_on();
+#if DEBUG_TO_SCREEN
+ ++displaying;
+#endif
+
+ // Move to the home position
+ send_cmd3(PageAddr, 0, MatrixRows - 1);
+ send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+ if (i2c_start_write(SSD1306_ADDRESS)) {
+ goto done;
+ }
+ if (i2c_master_write(0x40)) {
+ // Data mode
+ goto done;
+ }
+
+ for (uint8_t row = 0; row < MatrixRows; ++row) {
+ for (uint8_t col = 0; col < MatrixCols; ++col) {
+ const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
+
+ for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
+ uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+ i2c_master_write(colBits);
+ }
+
+ // 1 column of space between chars (it's not included in the glyph)
+ //i2c_master_write(0);
+ }
+ }
+
+ matrix->dirty = false;
+
+done:
+ i2c_master_stop();
+#if DEBUG_TO_SCREEN
+ --displaying;
+#endif
+}
+
+void iota_gfx_flush(void) {
+ matrix_render(&display);
+}
+
+__attribute__ ((weak))
+void iota_gfx_task_user(void) {
+}
+
+void iota_gfx_task(void) {
+ iota_gfx_task_user();
+
+ if (display.dirty|| force_dirty) {
+ iota_gfx_flush();
+ force_dirty = false;
+ }
+
+ if (timer_elapsed(last_flush) > ScreenOffInterval) {
+ iota_gfx_off();
+ }
+}
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+ force_dirty = true;
+ return true;
+}
+
+#endif
diff --git a/keyboards/comet46/ssd1306.h b/keyboards/comet46/ssd1306.h
new file mode 100644
index 000000000..ea8c92328
--- /dev/null
+++ b/keyboards/comet46/ssd1306.h
@@ -0,0 +1,91 @@
+#pragma once
+
+#include <stdbool.h>
+#include <stdio.h>
+#include "pincontrol.h"
+#include "action.h"
+
+enum ssd1306_cmds {
+ DisplayOff = 0xAE,
+ DisplayOn = 0xAF,
+
+ SetContrast = 0x81,
+ DisplayAllOnResume = 0xA4,
+
+ DisplayAllOn = 0xA5,
+ NormalDisplay = 0xA6,
+ InvertDisplay = 0xA7,
+ SetDisplayOffset = 0xD3,
+ SetComPins = 0xda,
+ SetVComDetect = 0xdb,
+ SetDisplayClockDiv = 0xD5,
+ SetPreCharge = 0xd9,
+ SetMultiPlex = 0xa8,
+ SetLowColumn = 0x00,
+ SetHighColumn = 0x10,
+ SetStartLine = 0x40,
+
+ SetMemoryMode = 0x20,
+ ColumnAddr = 0x21,
+ PageAddr = 0x22,
+
+ ComScanInc = 0xc0,
+ ComScanDec = 0xc8,
+ SegRemap = 0xa0,
+ SetChargePump = 0x8d,
+ ExternalVcc = 0x01,
+ SwitchCapVcc = 0x02,
+
+ ActivateScroll = 0x2f,
+ DeActivateScroll = 0x2e,
+ SetVerticalScrollArea = 0xa3,
+ RightHorizontalScroll = 0x26,
+ LeftHorizontalScroll = 0x27,
+ VerticalAndRightHorizontalScroll = 0x29,
+ VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#ifndef SSD1306_ADDRESS
+#define SSD1306_ADDRESS 0x3C
+#endif
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+ uint8_t display[MatrixRows][MatrixCols];
+ uint8_t *cursor;
+ bool dirty;
+};
+
+struct CharacterMatrix display;
+
+bool iota_gfx_init(bool rotate);
+void iota_gfx_task(void);
+bool iota_gfx_off(void);
+bool iota_gfx_on(void);
+void iota_gfx_flush(void);
+void iota_gfx_write_char(uint8_t c);
+void iota_gfx_write(const char *data);
+void iota_gfx_write_P(const char *data);
+void iota_gfx_clear_screen(void);
+
+void iota_gfx_task_user(void);
+
+void matrix_clear(struct CharacterMatrix *matrix);
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
+void matrix_render(struct CharacterMatrix *matrix);
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record); \ No newline at end of file