diff options
24 files changed, 1906 insertions, 330 deletions
diff --git a/keyboards/comet46/comet46.c b/keyboards/comet46/comet46.c index 20dcfab83..0710b8e33 100644 --- a/keyboards/comet46/comet46.c +++ b/keyboards/comet46/comet46.c @@ -4,19 +4,11 @@ void uart_init(void) { SERIAL_UART_INIT(); } -void led_init(void) { - DDRD |= (1<<1); - PORTD |= (1<<1); - DDRF |= (1<<4) | (1<<5); - PORTF |= (1<<4) | (1<<5); -} - void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up matrix_init_user(); uart_init(); - led_init(); } void matrix_scan_kb(void) { diff --git a/keyboards/comet46/comet46.h b/keyboards/comet46/comet46.h index 7d6d6d513..07dad0a00 100644 --- a/keyboards/comet46/comet46.h +++ b/keyboards/comet46/comet46.h @@ -6,46 +6,6 @@ #include "backlight.h" #include <stddef.h> -#define red_led_off PORTF |= (1<<5) -#define red_led_on PORTF &= ~(1<<5) -#define blu_led_off PORTF |= (1<<4) -#define blu_led_on PORTF &= ~(1<<4) -#define grn_led_off PORTD |= (1<<1) -#define grn_led_on PORTD &= ~(1<<1) - -#define set_led_off red_led_off; grn_led_off; blu_led_off -#define set_led_red red_led_on; grn_led_off; blu_led_off -#define set_led_blue red_led_off; grn_led_off; blu_led_on -#define set_led_green red_led_off; grn_led_on; blu_led_off -#define set_led_yellow red_led_on; grn_led_on; blu_led_off -#define set_led_magenta red_led_on; grn_led_off; blu_led_on -#define set_led_cyan red_led_off; grn_led_on; blu_led_on -#define set_led_white red_led_on; grn_led_on; blu_led_on - -/* -#define LED_B 5 -#define LED_R 6 -#define LED_G 7 - -#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) - -#define red_led_on PORTF |= (1<<LED_R) -#define red_led_off PORTF &= ~(1<<LED_R) -#define grn_led_on PORTF |= (1<<LED_G) -#define grn_led_off PORTF &= ~(1<<LED_G) -#define blu_led_on PORTF |= (1<<LED_B) -#define blu_led_off PORTF &= ~(1<<LED_B) - -#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) -#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R) -#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B) -#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G) -#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G) -#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B) -#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) -#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) -*/ - // This a shortcut to help you visually see your layout. // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array diff --git a/keyboards/comet46/config.h b/keyboards/comet46/config.h index 2421f5341..c43f13a50 100644 --- a/keyboards/comet46/config.h +++ b/keyboards/comet46/config.h @@ -41,12 +41,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ONESHOT_TIMEOUT 500 - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -65,6 +59,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +// Define masks for modifiers +#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL)) +#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)) + //UART settings for communication with the RF microcontroller #define SERIAL_UART_BAUD 1000000 #define SERIAL_UART_DATA UDR1 diff --git a/keyboards/comet46/i2c.c b/keyboards/comet46/i2c.c new file mode 100644 index 000000000..4bee5c639 --- /dev/null +++ b/keyboards/comet46/i2c.c @@ -0,0 +1,162 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} +#endif diff --git a/keyboards/comet46/i2c.h b/keyboards/comet46/i2c.h new file mode 100644 index 000000000..47cf6bd1b --- /dev/null +++ b/keyboards/comet46/i2c.h @@ -0,0 +1,49 @@ +#ifndef I2C_H +#define I2C_H + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/comet46/keymaps/default-rgbled/keymap.c b/keyboards/comet46/keymaps/default-rgbled/keymap.c new file mode 100644 index 000000000..d446d50d0 --- /dev/null +++ b/keyboards/comet46/keymaps/default-rgbled/keymap.c @@ -0,0 +1,226 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum comet46_layers +{ + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------+ +-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Ctl | A | S | D | F | G | Esc | | Del | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | { | | } | N | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | GUI | Lower| Space| | Enter| Raise| Alt | + * +--------------------/ \--------------------+ + */ + [_QWERTY] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_ESC, KC_DEL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT + ), + + /* Colemak + * ,-----------------------------------------+ +-----------------------------------------. + * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Ctl | A | R | S | T | D | Esc | | Del | H | N | E | I | O | " | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | { | | } | K | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | GUI | Lower| Space| | Enter| Raise| Alt | + * +--------------------/ \--------------------+ + */ + [_COLEMAK] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_ESC, KC_DEL, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT + ), + + /* Dvorak + * ,-----------------------------------------+ +-----------------------------------------. + * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Ctl | A | O | E | U | I | Esc | | Del | D | H | T | N | S | / | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | { | | } | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | GUI | Lower| Space| | Enter| Raise| Alt | + * +--------------------/ \--------------------+ + */ + [_DVORAK] = LAYOUT( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_ESC, KC_DEL, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LCBR, KC_RCBR, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT + ), + + /* Lower + * ,-----------------------------------------+ +-----------------------------------------. + * | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | | | | | | | | ` | \ | - | = | [ | ] | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | | | | | | | | ~ | | | _ | + | { | } | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | | | | | | | | + * +--------------------/ \--------------------+ + */ + [_LOWER] = LAYOUT( + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + _______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, + _______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, + _______, _______, _______, _______, _______, _______ + ), + + /* Raise + * ,-----------------------------------------+ +-----------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | | | | | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | PgDn | PgUp | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | | | | | | | | + * +--------------------/ \--------------------+ + */ + [_RAISE] = LAYOUT( + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______, + _______, _______, _______, _______, _______, _______ + ), + + /* Adjust + * ,-----------------------------------------+ +-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | | | | | |Qwerty| |Colemk| | | | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | | | | | |Reset | |Dvorak| | | | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | | | | | | | | + * +--------------------/ \--------------------+ + */ + [_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, RESET, DVORAK, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ + ) +}; + + +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); +} + +// settings for LED on receiver +void led_init(void) { + DDRD |= (1<<1); + PORTD |= (1<<1); + DDRF |= (1<<4) | (1<<5); + PORTF |= (1<<4) | (1<<5); +} + +#define red_led_off PORTF |= (1<<5) +#define red_led_on PORTF &= ~(1<<5) +#define blu_led_off PORTF |= (1<<4) +#define blu_led_on PORTF &= ~(1<<4) +#define grn_led_off PORTD |= (1<<1) +#define grn_led_on PORTD &= ~(1<<1) + +#define set_led_off red_led_off; grn_led_off; blu_led_off +#define set_led_red red_led_on; grn_led_off; blu_led_off +#define set_led_blue red_led_off; grn_led_off; blu_led_on +#define set_led_green red_led_off; grn_led_on; blu_led_off +#define set_led_yellow red_led_on; grn_led_on; blu_led_off +#define set_led_magenta red_led_on; grn_led_off; blu_led_on +#define set_led_cyan red_led_off; grn_led_on; blu_led_on +#define set_led_white red_led_on; grn_led_on; blu_led_on + +void matrix_init_user(void) { + led_init(); +} + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + uint8_t default_layer = biton32(eeconfig_read_default_layer()); + switch (layer) { + case _LOWER: + set_led_red; + break; + case _RAISE: + set_led_blue; + break; + case _ADJUST: + set_led_magenta; + break; + default: + switch (default_layer) { + case _COLEMAK: + set_led_white; + break; + case _DVORAK: + set_led_yellow; + break; + default: + set_led_green; + break; + } + break; + } +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + break; + } + return true; +} diff --git a/keyboards/comet46/keymaps/default-rgbled/readme.md b/keyboards/comet46/keymaps/default-rgbled/readme.md new file mode 100644 index 000000000..40cc74433 --- /dev/null +++ b/keyboards/comet46/keymaps/default-rgbled/readme.md @@ -0,0 +1,3 @@ +## default-led + +A keymap that is compatible with mitosis-type receivers, which use RGB LED for layer indication. diff --git a/keyboards/comet46/keymaps/default/config.h b/keyboards/comet46/keymaps/default/config.h new file mode 100644 index 000000000..7873cf5a7 --- /dev/null +++ b/keyboards/comet46/keymaps/default/config.h @@ -0,0 +1,31 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +// #include "../../config.h" + +/* Use I2C or Serial */ + +#define USE_I2C +#define SSD1306OLED + +#endif diff --git a/keyboards/comet46/keymaps/default/keymap.c b/keyboards/comet46/keymaps/default/keymap.c index b03ece4e9..c87492e4b 100644 --- a/keyboards/comet46/keymaps/default/keymap.c +++ b/keyboards/comet46/keymaps/default/keymap.c @@ -2,6 +2,10 @@ // This is the canonical layout file for the Quantum project. If you want to add another keyboard, #include QMK_KEYBOARD_H +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -9,13 +13,18 @@ // entirely and just use numbers. enum comet46_layers { - _QWERTY, - _LOWER, - _RAISE, + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _ADJUST, }; enum custom_keycodes { QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, LOWER, RAISE, }; @@ -46,6 +55,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT ), + /* Colemak + * ,-----------------------------------------+ +-----------------------------------------. + * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Ctl | A | R | S | T | D | Esc | | Del | H | N | E | I | O | " | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | { | | } | K | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | GUI | Lower| Space| | Enter| Raise| Alt | + * +--------------------/ \--------------------+ + */ + [_COLEMAK] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_ESC, KC_DEL, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT + ), + + /* Dvorak + * ,-----------------------------------------+ +-----------------------------------------. + * | Tab | " | , | . | P | Y | | F | G | C | R | L | Bksp | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Ctl | A | O | E | U | I | Esc | | Del | D | H | T | N | S | / | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | { | | } | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | GUI | Lower| Space| | Enter| Raise| Alt | + * +--------------------/ \--------------------+ + */ + [_DVORAK] = LAYOUT( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_ESC, KC_DEL, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LCBR, KC_RCBR, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT + ), + /* Lower * ,-----------------------------------------+ +-----------------------------------------. * | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | @@ -70,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| * | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | | * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | | | | | | + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | PgDn | PgUp | | | | * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| * | | | | | | | | * +--------------------/ \--------------------+ @@ -78,26 +123,134 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = LAYOUT( _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______, + _______, _______, _______, _______, _______, _______ + ), + + /* Adjust + * ,-----------------------------------------+ +-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | | | | | |Qwerty| |Colemk| | | | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| + * | | | | | | |Reset | |Dvorak| | | | | | | + * |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| + * | | | | | | | | + * +--------------------/ \--------------------+ + */ + [_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, RESET, DVORAK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// You need to add source files to SRC in rules.mk when using OLED display functions +void set_keylog(uint16_t keycode); +const char *read_keylog(void); +const char *read_modifier_state(void); +const char *read_host_led_state(void); + +void matrix_init_user(void) { + iota_gfx_init(false); // turns on the display +} + void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - switch (layer) { - case _QWERTY: - set_led_green; - break; - case _RAISE: - set_led_blue; - break; - case _LOWER: - set_led_red; - break; + iota_gfx_task(); // this is what updates the display continuously +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void render_status(struct CharacterMatrix *matrix) { + // Layer state + char layer_str[22]; + matrix_write(matrix, "Layer: "); + uint8_t layer = biton32(layer_state); + uint8_t default_layer = biton32(eeconfig_read_default_layer()); + switch (layer) { + case _QWERTY: + switch (default_layer) { + case _QWERTY: + snprintf(layer_str, sizeof(layer_str), "Qwerty"); + break; + case _COLEMAK: + snprintf(layer_str, sizeof(layer_str), "Colemak"); + break; + case _DVORAK: + snprintf(layer_str, sizeof(layer_str), "Dvorak"); + break; default: - set_led_green; - break; + snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer); + break; + } + break; + case _RAISE: + snprintf(layer_str, sizeof(layer_str), "Raise"); + break; + case _LOWER: + snprintf(layer_str, sizeof(layer_str), "Lower"); + break; + case _ADJUST: + snprintf(layer_str, sizeof(layer_str), "Adjust"); + break; + default: + snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer); + } + matrix_write_ln(matrix, layer_str); + // Last entered keycode + matrix_write_ln(matrix, read_keylog()); + // Modifier state + matrix_write_ln(matrix, read_modifier_state()); + // Host Keyboard LED Status + matrix_write(matrix, read_host_led_state()); +} + + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + render_status(&matrix); + matrix_update(&display, &matrix); +} + +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + #ifdef SSD1306OLED + if (record->event.pressed) { + set_keylog(keycode); } + #endif + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + break; + } + return true; } diff --git a/keyboards/comet46/keymaps/default/readme.md b/keyboards/comet46/keymaps/default/readme.md new file mode 100644 index 000000000..b0085d2a6 --- /dev/null +++ b/keyboards/comet46/keymaps/default/readme.md @@ -0,0 +1,3 @@ +## default-oled-display + +A keymap that is compatible with receivers with an OLED display. diff --git a/keyboards/comet46/keymaps/default/rules.mk b/keyboards/comet46/keymaps/default/rules.mk new file mode 100644 index 000000000..3fa01f96a --- /dev/null +++ b/keyboards/comet46/keymaps/default/rules.mk @@ -0,0 +1,5 @@ +# If you want to change display settings of the OLED, you need to change the following lines +SRC += ./lib/glcdfont.c \ + ./lib/keylogger.c \ + ./lib/modifier_state_reader.c \ + ./lib/host_led_state_reader.c diff --git a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c b/keyboards/comet46/keymaps/satt/action_pseudo_lut.c index 5664d4d2a..0ac713359 100644 --- a/keyboards/comet46/keymaps/satt/action_pseudo_lut.c +++ b/keyboards/comet46/keymaps/satt/action_pseudo_lut.c @@ -10,133 +10,133 @@ static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE]; * Memo: Using other layer keymap to get keycode */ void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) { - uint8_t prev_shift; - uint16_t keycode; - uint16_t pseudo_keycode; + uint8_t prev_shift; + uint16_t keycode; + uint16_t pseudo_keycode; - /* get keycode from keymap you specified */ - keycode = keymap_key_to_keycode(base_keymap_id, record->event.key); + /* get keycode from keymap you specified */ + keycode = keymap_key_to_keycode(base_keymap_id, record->event.key); - prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)); + prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)); - if (record->event.pressed) { - /* when magic commands entered, keycode does not converted */ - if (IS_COMMAND()) { - if (prev_shift) { - add_shift_bit(keycode); - } - register_code(keycode); - return; - } + if (record->event.pressed) { + /* when magic commands entered, keycode does not converted */ + if (IS_COMMAND()) { + if (prev_shift) { + add_shift_bit(keycode); + } + register_code(keycode); + return; + } - if (prev_shift) { - pseudo_keycode = convert_keycode(keymap, keycode, true); - dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); - add_shift_bit(keycode); + if (prev_shift) { + pseudo_keycode = convert_keycode(keymap, keycode, true); + dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); + add_shift_bit(keycode); - if (IS_LSFT(pseudo_keycode)) { - register_code(QK_LSFT ^ pseudo_keycode); - } else { - /* delete shift mod temporarily */ - del_mods(prev_shift); - send_keyboard_report(); - register_code(pseudo_keycode); - add_mods(prev_shift); - send_keyboard_report(); - } - } else { - pseudo_keycode = convert_keycode(keymap, keycode, false); - dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); + if (IS_LSFT(pseudo_keycode)) { + register_code(QK_LSFT ^ pseudo_keycode); + } else { + /* delete shift mod temporarily */ + del_mods(prev_shift); + send_keyboard_report(); + register_code(pseudo_keycode); + add_mods(prev_shift); + send_keyboard_report(); + } + } else { + pseudo_keycode = convert_keycode(keymap, keycode, false); + dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); - if (IS_LSFT(pseudo_keycode)) { - add_weak_mods(MOD_BIT(KC_LSFT)); - send_keyboard_report(); - register_code(QK_LSFT ^ pseudo_keycode); - /* on Windows, prevent key repeat to avoid unintended output */ - unregister_code(QK_LSFT ^ pseudo_keycode); - del_weak_mods(MOD_BIT(KC_LSFT)); - send_keyboard_report(); - } else { - register_code(pseudo_keycode); - } - } + if (IS_LSFT(pseudo_keycode)) { + add_weak_mods(MOD_BIT(KC_LSFT)); + send_keyboard_report(); + register_code(QK_LSFT ^ pseudo_keycode); + /* on Windows, prevent key repeat to avoid unintended output */ + unregister_code(QK_LSFT ^ pseudo_keycode); + del_weak_mods(MOD_BIT(KC_LSFT)); + send_keyboard_report(); + } else { + register_code(pseudo_keycode); + } + } + } else { + if (get_shift_bit(keycode)) { + del_shift_bit(keycode); + pseudo_keycode = convert_keycode(keymap, keycode, true); } else { - if (get_shift_bit(keycode)) { - del_shift_bit(keycode); - pseudo_keycode = convert_keycode(keymap, keycode, true); - } else { - pseudo_keycode = convert_keycode(keymap, keycode, false); - } - dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode); + pseudo_keycode = convert_keycode(keymap, keycode, false); + } + dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode); - if (IS_LSFT(pseudo_keycode)) { - unregister_code(QK_LSFT ^ pseudo_keycode); - } else { - unregister_code(pseudo_keycode); - } + if (IS_LSFT(pseudo_keycode)) { + unregister_code(QK_LSFT ^ pseudo_keycode); + } else { + unregister_code(pseudo_keycode); } + } } uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded) { - uint16_t pseudo_keycode; + uint16_t pseudo_keycode; - switch (keycode) { - case KC_A ... KC_CAPSLOCK: -#if defined(__AVR__) - if (shift_modded) { - pseudo_keycode = pgm_read_word(&keymap[keycode][1]); - } else { - pseudo_keycode = pgm_read_word(&keymap[keycode][0]); - } -#else - if (shift_modded) { - pseudo_keycode = keymap[keycode][1]; - } else { - pseudo_keycode = keymap[keycode][0]; - } -#endif - /* if undefined, use got keycode as it is */ - if (pseudo_keycode == 0x00) { - if (shift_modded) { - pseudo_keycode = S(keycode); - } else { - pseudo_keycode = keycode; - } - } - break; - default: - if (shift_modded) { - pseudo_keycode = S(keycode); - } else { - pseudo_keycode = keycode; - } - break; - } - return pseudo_keycode; + switch (keycode) { + case KC_A ... KC_CAPSLOCK: + #if defined(__AVR__) + if (shift_modded) { + pseudo_keycode = pgm_read_word(&keymap[keycode][1]); + } else { + pseudo_keycode = pgm_read_word(&keymap[keycode][0]); + } + #else + if (shift_modded) { + pseudo_keycode = keymap[keycode][1]; + } else { + pseudo_keycode = keymap[keycode][0]; + } + #endif + /* if undefined, use got keycode as it is */ + if (pseudo_keycode == 0x00) { + if (shift_modded) { + pseudo_keycode = S(keycode); + } else { + pseudo_keycode = keycode; + } + } + break; + default: + if (shift_modded) { + pseudo_keycode = S(keycode); + } else { + pseudo_keycode = keycode; + } + break; + } + return pseudo_keycode; } uint8_t get_shift_bit(uint16_t keycode) { - if ((keycode >> 3) < SHIFT_BIT_SIZE) { - return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7)); - } else { - dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode); - return 0; - } + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7)); + } else { + dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode); + return 0; + } } void add_shift_bit(uint16_t keycode) { - if ((keycode >> 3) < SHIFT_BIT_SIZE) { - send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7)); - } else { - dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode); - } + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7)); + } else { + dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode); + } } void del_shift_bit(uint16_t keycode) { - if ((keycode >> 3) < SHIFT_BIT_SIZE) { - send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7)); - } else { - dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode); - } + if ((keycode >> 3) < SHIFT_BIT_SIZE) { + send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7)); + } else { + dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode); + } } diff --git a/keyboards/comet46/keymaps/satt/config.h b/keyboards/comet46/keymaps/satt/config.h new file mode 100644 index 000000000..c99de2cf8 --- /dev/null +++ b/keyboards/comet46/keymaps/satt/config.h @@ -0,0 +1,34 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ +) + +/* Use I2C or Serial */ + +#define USE_I2C +#define SSD1306OLED + +#endif diff --git a/keyboards/comet46/keymaps/satt/keymap.c b/keyboards/comet46/keymaps/satt/keymap.c index 7e728e5d0..eec40eff4 100644 --- a/keyboards/comet46/keymaps/satt/keymap.c +++ b/keyboards/comet46/keymaps/satt/keymap.c @@ -4,64 +4,96 @@ #include QMK_KEYBOARD_H #include "keymap_jis2us.h" #include "action_pseudo_lut.h" +#include "keymap_jp.h" +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. enum comet46_layers { - _QWERTY, - _LOWER, - _RAISE, - _PSEUDO_US, - _PSEUDO_US_LOWER, - _PSEUDO_US_RAISE, - _ADJUST + _QWERTY, + _LOWER, + _RAISE, + _PSEUDO_US, + _PSEUDO_US_LOWER, + _PSEUDO_US_RAISE, + _ADJUST }; enum custom_keycodes { QWERTY = SAFE_RANGE, PSEUDO_US, + JIS2US, }; -#define KC_LWR MO(_LOWER) -#define KC_RSE MO(_RAISE) +// JIS keycodes +#define KC_JZHT JP_ZHTG // hankaku/zenkaku|kanzi +#define KC_JCIR JP_CIRC // ^, ~ +#define KC_JAT JP_AT // @, ` +#define KC_JLBR JP_LBRC // [, { +#define KC_JCOL JP_COLN // :, * +#define KC_JRBR JP_RBRC // ], } +#define KC_JBSL JP_BSLS // \, _ +#define KC_JMHE JP_MHEN // muhenkan +#define KC_JHEN JP_HENK // henkan +#define KC_JKAN JP_KANA // katakana/hiragana|ro-mazi +#define KC_JMKA JP_MKANA //kana on MacOSX +#define KC_JMEI JP_MEISU //eisu on MacOSX +#define KC_JAMP JP_AMPR // & +#define KC_JQUO JP_QUOT // ' +#define KC_JLPR JP_LPRN // ( +#define KC_JRPR JP_RPRN // ) +#define KC_JEQL JP_EQL // = +#define KC_JTIL JP_TILD // ~ +#define KC_JPIP JP_PIPE // | +#define KC_JGRV JP_GRV // ` +#define KC_JLCB JP_LCBR // { +#define KC_JPLU JP_PLUS // + +#define KC_JAST JP_ASTR // * +#define KC_JRCB JP_RCBR // } +#define KC_JUND JP_UNDS // _ + +// Layer related keycodes +#define KC_LWR MO(_LOWER) +#define KC_RSE MO(_RAISE) #define KC_P_LW MO(_PSEUDO_US_LOWER) #define KC_P_RS MO(_PSEUDO_US_RAISE) #define KC_QWRT QWERTY #define KC_P_US PSEUDO_US +#define KC_J2US JIS2US + +// Special keycodes #define KC_SPCT CTL_T(KC_SPC) #define KC_ENSF SFT_T(KC_ENT) -#define KC_SFTA SFT_T(KC_A) -#define KC_CTSF S(KC_LCTL) +#define KC_CAEC MT(MOD_LCTL | MOD_LALT, KC_ESC) +#define KC_CSTB C_S_T(KC_TAB) #define KC_IMON ALT_T(KC_F13) #define KC_IMOF GUI_T(KC_F14) -#define KC_SRO S(KC_RO) -#define KC_SYEN S(KC_JYEN) #define KC_CAD LCA(KC_DEL) #define KC_RST RESET -#define LONGPRESS_DELAY 150 - // Fillers to make layering more clear -#define KC_ KC_TRNS +#define KC_ KC_TRNS #define KC_XXXX KC_NO const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_kc( + [_QWERTY] = LAYOUT_kc( //,----+----+----+----+----+----+ +----+----+----+----+----+----. - ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL , + CAEC, Q , W , E , R , T , Y , U , I , O , P ,DEL , //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - TAB ,SFTA, S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,BSPC, + CSTB, A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,BSPC, //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - CTSF, Z , X , C , V , B ,LBRC, RBRC, N , M ,COMM,DOT ,SLSH,QUOT, + LSFT, Z , X , C , V , B ,LBRC, RBRC, N , M ,COMM,DOT ,SLSH,QUOT, //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| IMOF,LWR ,SPCT, ENSF,RSE ,IMON // +----+----+---/ \---+----+----+ ), - [_LOWER] = LAYOUT_kc( + [_LOWER] = LAYOUT_kc( //,----+----+----+----+----+----+ +----+----+----+----+----+----. ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| @@ -69,60 +101,60 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| , F7 , F8 , F9 , F10, F11, F12, TILD,PIPE,UNDS,PLUS,LCBR,RCBR, , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , + , , , , , // +----+----+---/ \---+----+----+ ), - [_RAISE] = LAYOUT_kc( + [_RAISE] = LAYOUT_kc( //,----+----+----+----+----+----+ +----+----+----+----+----+----. , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| , , , , , , , XXXX,LEFT,DOWN, UP ,RGHT,END , , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, , + , , , , , , , HOME,XXXX,PGDN,PGUP,XXXX,XXXX, , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , + , , , , , // +----+----+---/ \---+----+----+ ), - [_PSEUDO_US] = LAYOUT_kc( + [_PSEUDO_US] = LAYOUT_kc( //,----+----+----+----+----+----+ +----+----+----+----+----+----. - ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL , + CAEC, Q , W , E , R , T , Y , U , I , O , P ,DEL , //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - TAB ,SFTA, S , D , F , G ,ASTR, LPRN, H , J , K , L ,FN0 ,BSPC, + CSTB, A , S , D , F , G ,JLPR, JRPR, H , J , K , L ,J2US,BSPC, //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - CTSF, Z , X , C , V , B ,FN0 , FN0 , N , M ,COMM,DOT ,SLSH,FN0 , + LSFT, Z , X , C , V , B ,J2US, J2US, N , M ,COMM,DOT ,SLSH,J2US, //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| IMOF,P_LW,SPCT, ENSF,P_RS,IMON // +----+----+---/ \---+----+----+ ), - [_PSEUDO_US_LOWER] = LAYOUT_kc( + [_PSEUDO_US_LOWER] = LAYOUT_kc( //,----+----+----+----+----+----+ +----+----+----+----+----+----. - ,EXLM,LBRC,HASH,DLR ,PERC, EQL ,CIRC, DQT,ASTR,LPRN, , + ,EXLM,JAT ,HASH,DLR ,PERC, JCIR,JAMP,JAST,JLPR,JRPR, , //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - , F1 , F2 , F3 , F4 , F5 , F6 , LCBR,JYEN,MINS,UNDS,RBRC,BSLS, , + , F1 , F2 , F3 , F4 , F5 , F6 , JGRV,JBSL,MINS,JEQL,JLBR,JRBR, , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , F7 , F8 , F9 , F10, F11, F12, PLUS,SYEN,SRO ,COLN,RCBR,PIPE, , + , F7 , F8 , F9 , F10, F11, F12, JTIL,JPIP,JUND,JPLU,JLCB,JRCB, , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , + , , , , , // +----+----+---/ \---+----+----+ ), - [_PSEUDO_US_RAISE] = LAYOUT_kc( + [_PSEUDO_US_RAISE] = LAYOUT_kc( //,----+----+----+----+----+----+ +----+----+----+----+----+----. , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| - , , , , , , GRV, XXXX,LEFT,DOWN, UP ,RGHT,END , , + , , , , , ,JZHT, XXXX,LEFT,DOWN, UP ,RGHT,END , , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, , + , , , , , , , HOME,XXXX,PGDN,PGUP,XXXX,XXXX, , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , + , , , , , // +----+----+---/ \---+----+----+ ), - [_ADJUST] = LAYOUT_kc( + [_ADJUST] = LAYOUT_kc( //,----+----+----+----+----+----+ +----+----+----+----+----+----. , , , , , , , , , , , , //|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| @@ -130,90 +162,130 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| , , , , , ,RST , P_US, , , , , , , //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| - , , , , , + , , , , , // +----+----+---/ \---+----+----+ ) }; +uint32_t layer_state_set_user(uint32_t state) { + switch (biton32(state)) { + case _PSEUDO_US_LOWER: + case _PSEUDO_US_RAISE: + return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); + break; + default: + return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); + break; + } +} -/* - * user defined action function - */ -enum function_id { - PSEUDO_US_FUNCTION, -}; +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) - { - case PSEUDO_US_FUNCTION: - action_pseudo_lut(record, _QWERTY, keymap_jis2us); - break; - } -} +// You need to add source files to SRC in rules.mk when using OLED display functions +void set_keylog(uint16_t keycode); +const char *read_keylog(void); +const char *read_modifier_state(void); +const char *read_host_led_state(void); -/* - * Fn action definition - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(PSEUDO_US_FUNCTION), -}; +void matrix_init_user(void) { + iota_gfx_init(false); // turns on the display +} void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); + iota_gfx_task(); // this is what updates the display continuously +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void render_status(struct CharacterMatrix *matrix) { + // Layer state + char layer_str[22]; + matrix_write(matrix, "Layer: "); + uint8_t layer = biton32(layer_state); + uint8_t default_layer = biton32(eeconfig_read_default_layer()); switch (layer) { - case _LOWER: - set_led_red; - break; + case _QWERTY: + switch (default_layer) { + case _QWERTY: + snprintf(layer_str, sizeof(layer_str), "Qwerty"); + break; + case _PSEUDO_US: + snprintf(layer_str, sizeof(layer_str), "Psuedo_US"); + break; + default: + snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer); + break; + } + break; case _RAISE: - set_led_blue; - break; - case _PSEUDO_US_LOWER: - set_led_yellow; - break; + snprintf(layer_str, sizeof(layer_str), "Raise"); + break; + case _LOWER: + snprintf(layer_str, sizeof(layer_str), "Lower"); + break; case _PSEUDO_US_RAISE: - set_led_cyan; - break; + snprintf(layer_str, sizeof(layer_str), "P_US_Raise"); + break; + case _PSEUDO_US_LOWER: + snprintf(layer_str, sizeof(layer_str), "P_US_Lower"); + break; case _ADJUST: - set_led_magenta; - break; + snprintf(layer_str, sizeof(layer_str), "Adjust"); + break; default: - set_led_green; - break; + snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer); } -}; + matrix_write_ln(matrix, layer_str); + // Last entered keycode + matrix_write_ln(matrix, read_keylog()); + // Modifier state + matrix_write_ln(matrix, read_modifier_state()); + // Host Keyboard LED Status + matrix_write(matrix, read_host_led_state()); +} -uint32_t layer_state_set_user(uint32_t state) { - switch (biton32(state)) { - case _PSEUDO_US: - return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); - break; - case _PSEUDO_US_LOWER: - return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); - break; - case _PSEUDO_US_RAISE: - return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); - break; - default: - return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); - break; +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; } +#endif + + matrix_clear(&matrix); + render_status(&matrix); + matrix_update(&display, &matrix); } +#endif//SSD1306OLED + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + #ifdef SSD1306OLED + if (record->event.pressed) { + set_keylog(keycode); + } + #endif switch (keycode) { case QWERTY: if (record->event.pressed) { set_single_persistent_default_layer(_QWERTY); } - return false; break; case PSEUDO_US: if (record->event.pressed) { set_single_persistent_default_layer(_PSEUDO_US); } - return false; + break; + case JIS2US: + action_pseudo_lut(record, _QWERTY, keymap_jis2us); break; } return true; diff --git a/keyboards/comet46/keymaps/satt/keymap_jis2us.h b/keyboards/comet46/keymaps/satt/keymap_jis2us.h index cf2bd4f0e..e32a0579a 100644 --- a/keyboards/comet46/keymaps/satt/keymap_jis2us.h +++ b/keyboards/comet46/keymaps/satt/keymap_jis2us.h @@ -3,30 +3,30 @@ /* keymap for convert from JIS to US */ const uint16_t PROGMEM keymap_jis2us[][2] = { - [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */ + [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */ - [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */ - [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */ - [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */ - [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */ - [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */ - [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */ - [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */ - [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */ - [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */ - [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */ - [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */ - [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */ - [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */ - [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */ - [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */ - [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */ - [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */ - [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */ - [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */ - [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */ - [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */ - [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */ + [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */ + [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */ + [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */ + [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */ + [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */ + [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */ + [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */ + [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */ + [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */ + [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */ + [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */ + [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */ + [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */ + [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */ + [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */ + [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */ + [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */ + [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */ + [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */ + [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */ + [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */ + [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */ }; #endif diff --git a/keyboards/comet46/keymaps/satt/rules.mk b/keyboards/comet46/keymaps/satt/rules.mk index dc4355c78..5839b778b 100644 --- a/keyboards/comet46/keymaps/satt/rules.mk +++ b/keyboards/comet46/keymaps/satt/rules.mk @@ -1,26 +1,7 @@ SRC += action_pseudo_lut.c -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -ONEHAND_ENABLE = no # Enable one-hand typing - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif +# If you want to change display settings of the OLED, you need to change the following lines +SRC += ./lib/glcdfont.c \ + ./lib/keylogger.c \ + ./lib/modifier_state_reader.c \ + ./lib/host_led_state_reader.c diff --git a/keyboards/comet46/lib/glcdfont.c b/keyboards/comet46/lib/glcdfont.c new file mode 100644 index 000000000..e912d2233 --- /dev/null +++ b/keyboards/comet46/lib/glcdfont.c @@ -0,0 +1,148 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#elif defined(ESP8266) + #include <pgmspace.h> +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font + +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00 +}; +#endif // FONT5X7_H diff --git a/keyboards/comet46/lib/host_led_state_reader.c b/keyboards/comet46/lib/host_led_state_reader.c new file mode 100644 index 000000000..864b1e244 --- /dev/null +++ b/keyboards/comet46/lib/host_led_state_reader.c @@ -0,0 +1,15 @@ +#include <stdio.h> +#include "comet46.h" + +char host_led_state_str[22]; + +const char *read_host_led_state(void) { + uint8_t leds = host_keyboard_leds(); + + snprintf(host_led_state_str, sizeof(host_led_state_str), "Lock: %s%s%s", + (leds & (1 << USB_LED_CAPS_LOCK)) ? "CAPL " : "", + (leds & (1 << USB_LED_SCROLL_LOCK)) ? "SCRL " : "", + (leds & (1 << USB_LED_NUM_LOCK)) ? "NUML" : ""); + + return host_led_state_str; +} diff --git a/keyboards/comet46/lib/keylogger.c b/keyboards/comet46/lib/keylogger.c new file mode 100644 index 000000000..184f60109 --- /dev/null +++ b/keyboards/comet46/lib/keylogger.c @@ -0,0 +1,294 @@ +#include <stdio.h> + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#else + #define PROGMEM +#endif + +#define NUM_USB_HID_KEYCODES 255 +#define LEN_KEYCODE_STR 4 + +char keylog[22] = {"KC: ID: "}; + +// Quick and dirty way to display USB HID keycodes used in QMK +// USB HID keycodes from 0x0000 to 0x00FF are stored in a 4x256+1 length char +const char code_to_name[] PROGMEM = { + "NO " //0x00 + "TRNS" + "? " + "? " + "A " + "B " + "C " + "D " + "E " + "F " + "G " + "H " + "I " + "J " + "K " + "L " + "M " //0x10 + "N " + "O " + "P " + "Q " + "R " + "S " + "T " + "U " + "V " + "W " + "X " + "Y " + "Z " + "1 " + "2 " + "3 " //0x20 + "4 " + "5 " + "6 " + "7 " + "8 " + "9 " + "0 " + "ENT " + "ESC " + "BSPC" + "TAB " + "SPC " + "MINS" + "EQL " + "LBRC" + "RBRC" //0x30 + "BSLS" + "NUHS" + "SCLN" + "QUOT" + "GRV " + "COMM" + "DOT " + "SLSH" + "CAPS" + "F1 " + "F2 " + "F3 " + "F4 " + "F5 " + "F6 " + "F7 " //0x40 + "F8 " + "F9 " + "F10 " + "F11 " + "F12 " + "PSCR" + "SLCK" + "PAUS" + "INS " + "HOME" + "PGUP" + "DEL " + "END " + "PGDN" + "RGHT" + "LEFT" //0x50 + "DOWN" + "UP " + "NLCK" + "PSLS" + "PAST" + "PMNS" + "PPLS" + "PENT" + "P1 " + "P2 " + "P3 " + "P4 " + "P5 " + "P6 " + "P7 " + "P8 " //0x60 + "P9 " + "P0 " + "PDOT" + "NUBS" + "APP " + "POW " + "PEQL" + "F13 " + "F14 " + "F15 " + "F16 " + "F17 " + "F18 " + "F19 " + "F20 " + "F21 " //0x70 + "F22 " + "F23 " + "F24 " + "EXEC" + "HELP" + "MENU" + "SLCT" + "STOP" + "AGIN" + "UNDO" + "CUT " + "COPY" + "PSTE" + "FIND" + "_MUT" + "_VUP" //0x80 + "_VDN" + "LCAP" + "LNUM" + "LSCR" + "PCMM" + "PEQA" + "INT1" + "INT2" + "INT3" + "INT4" + "INT5" + "INT6" + "INT7" + "INT8" + "INT9" + "LAN1" //0x90 + "LAN2" + "LAN3" + "LAN4" + "LAN5" + "LAN6" + "LAN7" + "LAN8" + "LAN9" + "ERAS" + "SYSR" + "CNCL" + "CLR " + "PRIR" + "RTRN" + "SEP " + "OUT " //0xA0 + "OPER" + "CLRA" + "CSEL" + "ESEL" + "PWR " //0xA5 + "SLEP" + "WAKE" + "MUTE" + "VOLU" + "VOLD" + "MNXT" + "MPRV" + "MSTP" + "MPLY" + "MSEL" + "EJCT" //0xB0 + "MAIL" + "CALC" + "MYCM" + "WSCH" + "WHOM" + "WBAK" + "WFWD" + "WSTP" + "WREF" + "WFAV" + "MFFD" + "MRWD" + "BRIU" + "BRID" + "? " + "FN0 " //0xC0 + "FN1 " + "FN2 " + "FN3 " + "FN4 " + "FN5 " + "FN6 " + "FN7 " + "FN8 " + "FN9 " + "FN10" + "FN11" + "FN12" + "FN13" + "FN14" + "FN15" + "FN16" //0xD0 + "FN17" + "FN18" + "FN19" + "FN20" + "FN21" + "FN22" + "FN23" + "FN24" + "FN25" + "FN26" + "FN27" + "FN28" + "FN29" + "FN30" + "FN31" + "LCTL" //0xE0 + "LSFT" + "LALT" + "LGUI" + "RCTL" + "RSFT" + "RALT" + "RGUI" + "? " + "? " + "? " + "? " + "? " + "? " + "? " + "? " + "MS_U" //0xF0 + "MS_D" + "MS_L" + "MS_R" + "BTN1" + "BTN2" + "BTN3" + "BTN4" + "BTN5" + "WH_U" + "WH_D" + "WH_L" + "WH_R" + "ACL0" + "ACL1" + "ACL2" +}; + +void set_keylog(uint16_t keycode) +{ + char name[LEN_KEYCODE_STR+1] = "? "; + + if (keycode <= NUM_USB_HID_KEYCODES) { + for (uint8_t k = 0; k < LEN_KEYCODE_STR; k++) { + name[k] = pgm_read_byte_near(code_to_name + keycode * LEN_KEYCODE_STR + k); + } + } else if (keycode > NUM_USB_HID_KEYCODES) { + snprintf(name, sizeof(name), "QMK "); + } + + // update keylog + snprintf(keylog, sizeof(keylog), "KC: %s ID: %d", name, keycode); +} + +const char *read_keylog(void) { + return keylog; +} diff --git a/keyboards/comet46/lib/modifier_state_reader.c b/keyboards/comet46/lib/modifier_state_reader.c new file mode 100644 index 000000000..518eef92a --- /dev/null +++ b/keyboards/comet46/lib/modifier_state_reader.c @@ -0,0 +1,18 @@ +#include <stdio.h> +#include "comet46.h" + +char modifier_state_str[22]; + +const char *read_modifier_state(void) { + uint8_t modifiers = get_mods(); + uint8_t one_shot = get_oneshot_mods(); + + snprintf(modifier_state_str, sizeof(modifier_state_str), "Mod: %s%s%s%s", + (modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL " : "", + (modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI " : "", + (modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT " : "", + (modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : "" + ); + + return modifier_state_str; +} diff --git a/keyboards/comet46/readme.md b/keyboards/comet46/readme.md index 8df27183d..3db64d291 100644 --- a/keyboards/comet46/readme.md +++ b/keyboards/comet46/readme.md @@ -1,6 +1,6 @@ # Comet46 -![Comet46](https://user-images.githubusercontent.com/39004890/42418180-d5bb188c-82d5-11e8-99fa-65020ce5ac5d.jpg) +![Comet46](https://user-images.githubusercontent.com/39004890/50396817-a1660600-07af-11e9-8611-3156c635db43.jpg) A split wireless 40% column-staggered keyboard @@ -13,4 +13,5 @@ Make example for this keyboard (after setting up your build environment): make comet46:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk index 648b8b200..897cc9b8c 100644 --- a/keyboards/comet46/rules.mk +++ b/keyboards/comet46/rules.mk @@ -1,12 +1,8 @@ - -OPT_DEFS += -DCOMET46_ORTHO_===PROMICRO -COMET46_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) - # # project specific files -SRC = matrix.c - - +SRC += matrix.c \ + i2c.c \ + ssd1306.c + # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -24,8 +20,6 @@ MCU = atmega32u4 # software delays. F_CPU = 16000000 - -# # LUFA specific # # Target architecture (see library "Board Types" documentation). @@ -48,7 +42,7 @@ F_USB = $(F_CPU) # This definition is optional, and if your keyboard supports multiple bootloaders of # different sizes, comment this out, and the correct address will be loaded # automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina +# BOOTLOADER = caterina # Interrupt driven control endpoint task(+60) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/comet46/ssd1306.c b/keyboards/comet46/ssd1306.c new file mode 100644 index 000000000..4330c8497 --- /dev/null +++ b/keyboards/comet46/ssd1306.c @@ -0,0 +1,344 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c.h" +#include <string.h> +#include "print.h" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +static const unsigned char font[] PROGMEM; + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 60000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +static bool force_dirty = true; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_master_init(); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + + if(rotate){ + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); + }else{ + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); + } + + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { + char data_ln[strlen(data)+2]; + snprintf(data_ln, sizeof(data_ln), "%s\n", data); + matrix_write(matrix, data_ln); +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty|| force_dirty) { + iota_gfx_flush(); + force_dirty = false; + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + +#endif diff --git a/keyboards/comet46/ssd1306.h b/keyboards/comet46/ssd1306.h new file mode 100644 index 000000000..ea8c92328 --- /dev/null +++ b/keyboards/comet46/ssd1306.h @@ -0,0 +1,91 @@ +#pragma once + +#include <stdbool.h> +#include <stdio.h> +#include "pincontrol.h" +#include "action.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +#define SSD1306_ADDRESS 0x3C +#endif + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +struct CharacterMatrix display; + +bool iota_gfx_init(bool rotate); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
\ No newline at end of file |