diff options
30 files changed, 616 insertions, 136 deletions
diff --git a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md index a86061285..4fa1814fb 100644 --- a/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md +++ b/keyboards/ergodox/keymaps/romanzolotarev-norman-osx/readme.md @@ -20,7 +20,7 @@ It is `CTL_T(KC_ESC)` and it works this way: ## How to activate N-rollover -- Hold left `SHIFT` and right `SHIRT` and then tap `N`. +- Hold left `SHIFT` and right `SHIFT` and then tap `N`. ## How to make and flash on OS X diff --git a/keyboards/planck/keymaps/cbbrowne/config.h b/keyboards/planck/keymaps/cbbrowne/config.h index 2d3df59bd..58cd2cc5b 100644 --- a/keyboards/planck/keymaps/cbbrowne/config.h +++ b/keyboards/planck/keymaps/cbbrowne/config.h @@ -9,6 +9,11 @@ #define randmul 181 #define randmod 167 +/* Filler to make layering a bit clearer * + * borrowed from basic keymap */ + +#define _______ KC_TRNS + #endif diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c index 70eaefb7b..898f6f0e0 100644 --- a/keyboards/planck/keymaps/cbbrowne/keymap.c +++ b/keyboards/planck/keymaps/cbbrowne/keymap.c @@ -1,6 +1,6 @@ #include "planck.h" #ifdef BACKLIGHT_ENABLE - #include "backlight.h" +#include "backlight.h" #endif #include "config.h" #include "quantum.h" @@ -84,21 +84,22 @@ enum macro_id { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QW] = { /* Qwerty */ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MT(MOD_RSFT, KC_ENT)}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT }, {KC_TAB, M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + /* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */ }, [_RS] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [_LW] = { /* LOWER */ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, - {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, KC_TRNS}, - {KC_TRNS, DF(_KP), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______}, + {_______, DF(_KP), _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [_KP] = { /* Key Pad */ {KC_ESC, M(M_USERNAME), M(M_VERSION), KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC}, @@ -108,6 +109,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { } }; +/* What is fn_actions actually used for??? */ const uint16_t PROGMEM fn_actions[] = { }; diff --git a/keyboards/planck/keymaps/cbbrowne/readme.md b/keyboards/planck/keymaps/cbbrowne/readme.md index c676dd2c1..51979f630 100644 --- a/keyboards/planck/keymaps/cbbrowne/readme.md +++ b/keyboards/planck/keymaps/cbbrowne/readme.md @@ -7,16 +7,10 @@ Christopher Browne This was originally based on the default keyboard map, but I have been doing sundry experimentation: -1. Experiments +1. Useful Experiments ---------------------------------------- - * To figure things out about the toolset - * I'm an Emacs guy, so will be needing a fair bit of tuning * It made sense to mess around some with keyboard maps. - - I tried added Workman alongside Dvorak and Colemak - - Boy, oh boy, these don't help!!! - - I have done 30 years of learning of Emacs key mappings, and - these alternative keyboards massively mess me up - I added a keypad, originally based on keymaps/numpad.c, but mighty substantially revised, as that one seems to be rotated 90 degrees from usual conventions for number pads @@ -30,6 +24,7 @@ doing sundry experimentation: - Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random - Key [3][2] aka "z" uses a random number generator to select a letter a-z at random - Key [1][3] aka "e" spits out the keymap version number + * Minor use of Space Cadet Shift; my SHIFT key has switched to KC_LSP0, so that when I just hit SHIFT, I get a left parens: ( which is great for Lisping. I don't have a Right Shift, so I don't get an autoclose; I think I'll live with that until a Planck successor with more lines of keys :-) 2. Some code structure ideas --------------------------------------------------- @@ -62,3 +57,24 @@ doing sundry experimentation: and shift ESC off the first column so KC_LCTL and KC_LALT can be on the first column. * I needed to swap ' and ENTER + * I tried added Workman alongside Dvorak and Colemak + - Boy, oh boy, these don't help!!! + - I have done 30 years of learning of Emacs key mappings, and + these alternative keyboards massively mess me up + +4. TODO +--------------------------------------------------------- + + * I use tmux quite a lot; the mollat keymap seems to have some + interesting helpers. It might be interesting to add a "tmux + layer," or to have a few keys in a layer oriented towards that + * The mollat tmux layer also suggests some thoughts about Emacs + helpers. + * I do not presently have anything that handles X11 screen + switching, as with Control-Alt-various + * I ought to probably look into KC_LEAD, to have some key combos + that do not need to be concurrent + * The jeebak keymap seems to have some neat ideas: + - Number layer which is aggressive about having numbers in several places + - Touch layer seems interesting + * Trying out sgoodwin's "hold Enter down to get Shift"
\ No newline at end of file diff --git a/keyboards/planck/keymaps/pvc/Makefile b/keyboards/planck/keymaps/pvc/Makefile index 0b2f060de..b2ff961fa 100644 --- a/keyboards/planck/keymaps/pvc/Makefile +++ b/keyboards/planck/keymaps/pvc/Makefile @@ -1,12 +1,12 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/planck/keymaps/pvc/config.h b/keyboards/planck/keymaps/pvc/config.h index 1113372b0..1004c8b99 100644 --- a/keyboards/planck/keymaps/pvc/config.h +++ b/keyboards/planck/keymaps/pvc/config.h @@ -68,10 +68,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* disable debug print */ -//#define NO_DEBUG +#ifndef NO_DEBUG +# define NO_DEBUG +#endif /* disable print */ -//#define NO_PRINT +// #ifndef NO_PRINT +// # define NO_PRINT +// #endif + +/* Only print user print statements */ +#define USER_PRINT + /* disable action features */ //#define NO_ACTION_LAYER diff --git a/keyboards/planck/keymaps/pvc/keymap.c b/keyboards/planck/keymaps/pvc/keymap.c index 8ff40f377..23aedfc99 100644 --- a/keyboards/planck/keymaps/pvc/keymap.c +++ b/keyboards/planck/keymaps/pvc/keymap.c @@ -83,6 +83,7 @@ enum keyboard_macros { #define SC_ACLS LALT(KC_F4) #define SC_CCLS LCTL(KC_F4) +#define TG_NKRO MAGIC_TOGGLE_NKRO #define OS_SHFT KC_FN0 #define _______ KC_TRNS @@ -206,7 +207,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [LAYER_ADJUST] = { { XXXXXXX, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MU_TOG , AU_TOG }, { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX }, - { XXXXXXX, M_QWRTY, XXXXXXX, XXXXXXX, M_BACKL, RESET , XXXXXXX, M_MOUSE, XXXXXXX, XXXXXXX, MUV_IN , XXXXXXX }, + { XXXXXXX, M_QWRTY, XXXXXXX, XXXXXXX, M_BACKL, RESET , TG_NKRO, M_MOUSE, XXXXXXX, XXXXXXX, MUV_IN , XXXXXXX }, { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_UPPER, XXXXXXX, XXXXXXX, M_LOWER, XXXXXXX, TMPO_DN, MUV_DE , TMPO_UP } }, @@ -236,7 +237,7 @@ void persistant_default_layer_set(uint16_t default_layer) } const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_MODS_ONESHOT(MOD_LSFT), + [0] = ACTION_MODS_ONESHOT(MOD_RSFT), }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) diff --git a/keyboards/planck/keymaps/tong92/Makefile b/keyboards/planck/keymaps/tong92/Makefile new file mode 100644 index 000000000..e6608e74c --- /dev/null +++ b/keyboards/planck/keymaps/tong92/Makefile @@ -0,0 +1,62 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/planck/keymaps/tong92/keymap.c b/keyboards/planck/keymaps/tong92/keymap.c new file mode 100644 index 000000000..2be28fb4f --- /dev/null +++ b/keyboards/planck/keymaps/tong92/keymap.c @@ -0,0 +1,146 @@ +//Author: tong92 <tong92power@gmail.com> + +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define LOWER M(1) +#define RAISE M(2) +#define GO_DEFT M(99) +# + +//MIT Layout +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* 0: Qwerty layer (Default) +* ,-----------------------------------------------------------------------. +* |Tab | q | w | e | r | t | y | u | i | o | p | BS | +* |-----------------------------------------------------------------------| +* |Ctrl | a | s | d | f | g | h | j | k | l | ; |enter| +* |-----------------------------------------------------------------------| +* |Shift| z | x | c | v | b | n | m | , | . | / |Shift| +* |-----------------------------------------------------------------------| +* | Fn |Ctrl | Win | Alt |Lower| Space |Upper| ' | [ | ] | Alt | +* `-----------------------------------------------------------------------' +*/ +[0] ={ +{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, +{KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT }, +{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT}, +{MO(4), KC_RCTL,KC_LGUI,KC_LALT,LOWER,KC_SPC,KC_SPC,RAISE,KC_QUOT,KC_LBRC,KC_RBRC,KC_RALT} +}, +/* 1: Lower layer +* ,-----------------------------------------------------------------------. +* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | BS | +* |-----------------------------------------------------------------------| +* | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ | +* |-----------------------------------------------------------------------| +* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| +* |-----------------------------------------------------------------------| +* | | | | | | SPACE |mouse| END | LEFT| DOWN|RIGHT| +* `-----------------------------------------------------------------------' +*/ +[1] ={ +{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC }, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,KC_F12,_______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,_______,_______,KC_SPC,KC_SPC,_______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* 2: Upper layer +* ,-----------------------------------------------------------------------. +* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | BS | +* |-----------------------------------------------------------------------| +* | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | +* |-----------------------------------------------------------------------| +* | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| +* |-----------------------------------------------------------------------| +* | | | | |mouse| SPACE | | END | LEFT| DOWN|RIGHT| +* `-----------------------------------------------------------------------' +*/ +[2] ={ +{KC_TILD,KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC }, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS,KC_EQL, KC_LCBR,KC_RCBR,KC_PIPE }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,_______,_______,KC_SPC, KC_SPC, _______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* 4: fn layer (Window shortcuts) +* ,-----------------------------------------------------------------------. +* | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DEL | +* |-----------------------------------------------------------------------| +* | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | +* |-----------------------------------------------------------------------| +* | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | | +* |-----------------------------------------------------------------------| +* | |DeskL|DeskR|DeskX|Task | ChangeLang| | | | | LED | +* `-----------------------------------------------------------------------' +*/ +[4] ={ +{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT}, +{_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX}, +{_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,XXXXXXX}, +{KC_TRNS,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LGUI(LCTL(KC_F4)),LCTL(LALT(KC_DELT)),LGUI(KC_SPC),LGUI(KC_SPC),XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,M(0)} +}, +/* 10: mouse layer +* ,-----------------------------------------------------------------------. +* | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| |RESET| +* |-----------------------------------------------------------------------| +* | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | +* |-----------------------------------------------------------------------| +* | | | | | | | |M_AC0|M_AC1|M_AC2| | | +* |-----------------------------------------------------------------------| +* | | | | | | GO_DEFT | | | | | | +* `-----------------------------------------------------------------------' +*/ +[10] ={ +{XXXXXXX,XXXXXXX,XXXXXXX,KC_MS_U,XXXXXXX,XXXXXXX,XXXXXXX,KC_WH_L,KC_WH_U,KC_WH_R,XXXXXXX,RESET}, +{XXXXXXX,XXXXXXX,KC_MS_L,KC_MS_D,KC_MS_R,XXXXXXX,XXXXXXX,KC_BTN1,KC_WH_D,KC_BTN2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_ACL0,KC_ACL1,KC_ACL2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX} +} + +}; +//Layout END + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + break; + case 1: + if (record->event.pressed) { + layer_on(1); + update_tri_layer(1, 2, 10); + } else { + layer_off(1); + update_tri_layer(1, 2, 10); + } + break; + case 2: + if (record->event.pressed) { + layer_on(2); + update_tri_layer(1, 2, 10); + } else { + layer_off(2); + update_tri_layer(1, 2, 10); + } + break; + case 99: + if (record->event.pressed) { + layer_off(10); + layer_off(1); + layer_off(2); + layer_on(0); + update_tri_layer(0 ,1 ,2); + } + break; + } + return MACRO_NONE; +};
\ No newline at end of file diff --git a/keyboards/planck/keymaps/tong92/readme.md b/keyboards/planck/keymaps/tong92/readme.md new file mode 100644 index 000000000..328d005f6 --- /dev/null +++ b/keyboards/planck/keymaps/tong92/readme.md @@ -0,0 +1,66 @@ +# The Tong92 Layout +- MIT Layout +- my keymap for WIndow User +- Lower && Upper Hold -> Mouse Layer +- Mouse Layer : space -> Default Layer +- No Audio + +## 1. Default Layer - Qwerty + + ,-----------------------------------------------------------------------. + |Tab | q | w | e | r | t | y | u | i | o | p | BS | + |-----------------------------------------------------------------------| + |Ctrl | a | s | d | f | g | h | j | k | l | ; |enter| + |-----------------------------------------------------------------------| + |Shift| z | x | c | v | b | n | m | , | . | / |Shift| + |-----------------------------------------------------------------------| + | Fn |Ctrl | Win | Alt |Lower| Space |Upper| ' | [ | ] | Alt | + `-----------------------------------------------------------------------' + +## 2. Lower Layer + + ,-----------------------------------------------------------------------. + | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | BS | + |-----------------------------------------------------------------------| + | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ | + |-----------------------------------------------------------------------| + | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + |-----------------------------------------------------------------------| + | | | | | | SPACE |mouse| END | LEFT| DOWN|RIGHT| + `-----------------------------------------------------------------------' + +## 3. Upper Layer + + ,-----------------------------------------------------------------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | BS | + |-----------------------------------------------------------------------| + | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + |-----------------------------------------------------------------------| + | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + |-----------------------------------------------------------------------| + | | | | |mouse| SPACE | | END | LEFT| DOWN|RIGHT| + `-----------------------------------------------------------------------' + +## 4. Fn Layer - Window Shortcuts + + ,-----------------------------------------------------------------------. + | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DEL | + |-----------------------------------------------------------------------| + | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + |-----------------------------------------------------------------------| + | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | | + |-----------------------------------------------------------------------| + | |DeskL|DeskR|DeskX|Task | ChangeLang| | | | | LED | + `-----------------------------------------------------------------------' + +## 5. Mouse Layer + + ,-----------------------------------------------------------------------. + | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| |RESET| + |-----------------------------------------------------------------------| + | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + |-----------------------------------------------------------------------| + | | | | | | | |M_AC0|M_AC1|M_AC2| | | + |-----------------------------------------------------------------------| + | | | | | |GO_DEFAULT | | | | | | + `-----------------------------------------------------------------------'
\ No newline at end of file diff --git a/quantum/keycode_config.h b/quantum/keycode_config.h index 6216eefc9..c15b0d32f 100644 --- a/quantum/keycode_config.h +++ b/quantum/keycode_config.h @@ -1,6 +1,9 @@ #include "eeconfig.h" #include "keycode.h" +#ifndef KEYCODE_CONFIG_H +#define KEYCODE_CONFIG_H + uint16_t keycode_config(uint16_t keycode); /* NOTE: Not portable. Bit field order depends on implementation */ @@ -19,3 +22,5 @@ typedef union { } keymap_config_t; extern keymap_config_t keymap_config; + +#endif /* KEYCODE_CONFIG_H */ diff --git a/quantum/keymap.h b/quantum/keymap.h index f2d94d75c..98ddfd0c5 100644 --- a/quantum/keymap.h +++ b/quantum/keymap.h @@ -111,6 +111,7 @@ enum quantum_keycodes { MAGIC_UNSWAP_BACKSLASH_BACKSPACE, MAGIC_UNHOST_NKRO, MAGIC_UNSWAP_ALT_GUI, + MAGIC_TOGGLE_NKRO, // Leader key #ifndef DISABLE_LEADER diff --git a/quantum/quantum.c b/quantum/quantum.c index e3a20f43e..a16bd5443 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -199,7 +199,7 @@ bool process_record_quantum(keyrecord_t *record) { return false; break; #endif - case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_UNSWAP_ALT_GUI: + case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_NKRO: if (record->event.pressed) { // MAGIC actions (BOOTMAGIC without the boot) if (!eeconfig_is_enabled()) { @@ -207,48 +207,73 @@ bool process_record_quantum(keyrecord_t *record) { } /* keymap config */ keymap_config.raw = eeconfig_read_keymap(); - if (keycode == MAGIC_SWAP_CONTROL_CAPSLOCK) { - keymap_config.swap_control_capslock = 1; - } else if (keycode == MAGIC_CAPSLOCK_TO_CONTROL) { - keymap_config.capslock_to_control = 1; - } else if (keycode == MAGIC_SWAP_LALT_LGUI) { - keymap_config.swap_lalt_lgui = 1; - } else if (keycode == MAGIC_SWAP_RALT_RGUI) { - keymap_config.swap_ralt_rgui = 1; - } else if (keycode == MAGIC_NO_GUI) { - keymap_config.no_gui = 1; - } else if (keycode == MAGIC_SWAP_GRAVE_ESC) { - keymap_config.swap_grave_esc = 1; - } else if (keycode == MAGIC_SWAP_BACKSLASH_BACKSPACE) { - keymap_config.swap_backslash_backspace = 1; - } else if (keycode == MAGIC_HOST_NKRO) { - keymap_config.nkro = 1; - } else if (keycode == MAGIC_SWAP_ALT_GUI) { - keymap_config.swap_lalt_lgui = 1; - keymap_config.swap_ralt_rgui = 1; - } - /* UNs */ - else if (keycode == MAGIC_UNSWAP_CONTROL_CAPSLOCK) { - keymap_config.swap_control_capslock = 0; - } else if (keycode == MAGIC_UNCAPSLOCK_TO_CONTROL) { - keymap_config.capslock_to_control = 0; - } else if (keycode == MAGIC_UNSWAP_LALT_LGUI) { - keymap_config.swap_lalt_lgui = 0; - } else if (keycode == MAGIC_UNSWAP_RALT_RGUI) { - keymap_config.swap_ralt_rgui = 0; - } else if (keycode == MAGIC_UNNO_GUI) { - keymap_config.no_gui = 0; - } else if (keycode == MAGIC_UNSWAP_GRAVE_ESC) { - keymap_config.swap_grave_esc = 0; - } else if (keycode == MAGIC_UNSWAP_BACKSLASH_BACKSPACE) { - keymap_config.swap_backslash_backspace = 0; - } else if (keycode == MAGIC_UNHOST_NKRO) { - keymap_config.nkro = 0; - } else if (keycode == MAGIC_UNSWAP_ALT_GUI) { - keymap_config.swap_lalt_lgui = 0; - keymap_config.swap_ralt_rgui = 0; + switch (keycode) + { + case MAGIC_SWAP_CONTROL_CAPSLOCK: + keymap_config.swap_control_capslock = true; + break; + case MAGIC_CAPSLOCK_TO_CONTROL: + keymap_config.capslock_to_control = true; + break; + case MAGIC_SWAP_LALT_LGUI: + keymap_config.swap_lalt_lgui = true; + break; + case MAGIC_SWAP_RALT_RGUI: + keymap_config.swap_ralt_rgui = true; + break; + case MAGIC_NO_GUI: + keymap_config.no_gui = true; + break; + case MAGIC_SWAP_GRAVE_ESC: + keymap_config.swap_grave_esc = true; + break; + case MAGIC_SWAP_BACKSLASH_BACKSPACE: + keymap_config.swap_backslash_backspace = true; + break; + case MAGIC_HOST_NKRO: + keymap_config.nkro = true; + break; + case MAGIC_SWAP_ALT_GUI: + keymap_config.swap_lalt_lgui = true; + keymap_config.swap_ralt_rgui = true; + break; + case MAGIC_UNSWAP_CONTROL_CAPSLOCK: + keymap_config.swap_control_capslock = false; + break; + case MAGIC_UNCAPSLOCK_TO_CONTROL: + keymap_config.capslock_to_control = false; + break; + case MAGIC_UNSWAP_LALT_LGUI: + keymap_config.swap_lalt_lgui = false; + break; + case MAGIC_UNSWAP_RALT_RGUI: + keymap_config.swap_ralt_rgui = false; + break; + case MAGIC_UNNO_GUI: + keymap_config.no_gui = false; + break; + case MAGIC_UNSWAP_GRAVE_ESC: + keymap_config.swap_grave_esc = false; + break; + case MAGIC_UNSWAP_BACKSLASH_BACKSPACE: + keymap_config.swap_backslash_backspace = false; + break; + case MAGIC_UNHOST_NKRO: + keymap_config.nkro = false; + break; + case MAGIC_UNSWAP_ALT_GUI: + keymap_config.swap_lalt_lgui = false; + keymap_config.swap_ralt_rgui = false; + break; + case MAGIC_TOGGLE_NKRO: + keymap_config.nkro = !keymap_config.nkro; + break; + default: + break; } eeconfig_update_keymap(keymap_config.raw); + clear_keyboard(); // clear to prevent stuck keys + return false; } break; @@ -271,7 +296,7 @@ bool process_record_quantum(keyrecord_t *record) { unregister_mods(MOD_BIT(KC_LSFT)); } return false; - break; + // break; } case KC_RSPC: { @@ -293,7 +318,7 @@ bool process_record_quantum(keyrecord_t *record) { unregister_mods(MOD_BIT(KC_RSFT)); } return false; - break; + // break; } default: { shift_interrupted[0] = true; diff --git a/tmk_core/common/action_util.c b/tmk_core/common/action_util.c index 61ff202be..cb4b25264 100644 --- a/tmk_core/common/action_util.c +++ b/tmk_core/common/action_util.c @@ -20,6 +20,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "action_util.h" #include "action_layer.h" #include "timer.h" +#include "keycode_config.h" + +extern keymap_config_t keymap_config; + static inline void add_key_byte(uint8_t code); static inline void del_key_byte(uint8_t code); @@ -139,7 +143,7 @@ void send_keyboard_report(void) { void add_key(uint8_t key) { #ifdef NKRO_ENABLE - if (keyboard_protocol && keyboard_nkro) { + if (keyboard_protocol && keymap_config.nkro) { add_key_bit(key); return; } @@ -150,7 +154,7 @@ void add_key(uint8_t key) void del_key(uint8_t key) { #ifdef NKRO_ENABLE - if (keyboard_protocol && keyboard_nkro) { + if (keyboard_protocol && keymap_config.nkro) { del_key_bit(key); return; } @@ -231,7 +235,7 @@ uint8_t has_anymod(void) uint8_t get_first_key(void) { #ifdef NKRO_ENABLE - if (keyboard_protocol && keyboard_nkro) { + if (keyboard_protocol && keymap_config.nkro) { uint8_t i = 0; for (; i < KEYBOARD_REPORT_BITS && !keyboard_report->nkro.bits[i]; i++) ; diff --git a/tmk_core/common/avr/xprintf.h b/tmk_core/common/avr/xprintf.h index e53c0dd8e..08d9f93a0 100644 --- a/tmk_core/common/avr/xprintf.h +++ b/tmk_core/common/avr/xprintf.h @@ -56,8 +56,8 @@ void xitoa(long value, char radix, char width); #define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__) void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */ -void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */ -void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */ +// void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */ +// void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */ /* Format string is placed in the ROM. The format flags is similar to printf(). @@ -88,7 +88,7 @@ void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send format /*-----------------------------------------------------------------------------*/ char xatoi(char **str, long *ret); -/* Get value of the numeral string. +/* Get value of the numeral string. str Pointer to pointer to source string diff --git a/tmk_core/common/bootmagic.c b/tmk_core/common/bootmagic.c index 6730a2a4a..2c6bcbae5 100644 --- a/tmk_core/common/bootmagic.c +++ b/tmk_core/common/bootmagic.c @@ -83,10 +83,6 @@ void bootmagic(void) } eeconfig_update_keymap(keymap_config.raw); -#ifdef NKRO_ENABLE - keyboard_nkro = keymap_config.nkro; -#endif - /* default layer */ uint8_t default_layer = 0; if (bootmagic_scan_keycode(BOOTMAGIC_KEY_DEFAULT_LAYER_0)) { default_layer |= (1<<0); } diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c index 476fc6fe3..54d6117fd 100644 --- a/tmk_core/common/command.c +++ b/tmk_core/common/command.c @@ -238,7 +238,7 @@ static void print_status(void) print_val_hex8(keyboard_protocol); print_val_hex8(keyboard_idle); #ifdef NKRO_ENABLE - print_val_hex8(keyboard_nkro); + print_val_hex8(keymap_config.nkro); #endif print_val_hex32(timer_read32()); @@ -435,8 +435,8 @@ static bool command_common(uint8_t code) // NKRO toggle case MAGIC_KC(MAGIC_KEY_NKRO): clear_keyboard(); // clear to prevent stuck keys - keyboard_nkro = !keyboard_nkro; - if (keyboard_nkro) { + keymap_config.nkro = !keymap_config.nkro; + if (keymap_config.nkro) { print("NKRO: on\n"); } else { print("NKRO: off\n"); diff --git a/tmk_core/common/host.c b/tmk_core/common/host.c index 11a05c2dd..e12b62216 100644 --- a/tmk_core/common/host.c +++ b/tmk_core/common/host.c @@ -22,11 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "util.h" #include "debug.h" - -#ifdef NKRO_ENABLE -bool keyboard_nkro = true; -#endif - static host_driver_t *driver; static uint16_t last_system_report = 0; static uint16_t last_consumer_report = 0; diff --git a/tmk_core/common/host.h b/tmk_core/common/host.h index 9814b10d2..aeabba710 100644 --- a/tmk_core/common/host.h +++ b/tmk_core/common/host.h @@ -28,10 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. extern "C" { #endif -#ifdef NKRO_ENABLE -extern bool keyboard_nkro; -#endif - extern uint8_t keyboard_idle; extern uint8_t keyboard_protocol; diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index c46a701b3..371d93f3e 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -57,6 +57,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # include "visualizer/visualizer.h" #endif + + #ifdef MATRIX_HAS_GHOST static bool has_ghost_in_row(uint8_t row) { @@ -106,7 +108,7 @@ void keyboard_init(void) { rgblight_init(); #endif #if defined(NKRO_ENABLE) && defined(FORCE_NKRO) - keyboard_nkro = true; + keymap_config.nkro = 1; #endif } diff --git a/tmk_core/common/magic.c b/tmk_core/common/magic.c index 194e4cc02..49617a3d1 100644 --- a/tmk_core/common/magic.c +++ b/tmk_core/common/magic.c @@ -27,10 +27,6 @@ void magic(void) /* keymap config */ keymap_config.raw = eeconfig_read_keymap(); -#ifdef NKRO_ENABLE - keyboard_nkro = keymap_config.nkro; -#endif - uint8_t default_layer = 0; default_layer = eeconfig_read_default_layer(); default_layer_set((uint32_t)default_layer); diff --git a/tmk_core/common/mbed/xprintf.cpp b/tmk_core/common/mbed/xprintf.cpp index 3647ece75..b1aac2c99 100644 --- a/tmk_core/common/mbed/xprintf.cpp +++ b/tmk_core/common/mbed/xprintf.cpp @@ -7,7 +7,7 @@ #define STRING_STACK_LIMIT 120 //TODO -int xprintf(const char* format, ...) { return 0; } +int __xprintf(const char* format, ...) { return 0; } #if 0 /* mbed Serial */ diff --git a/tmk_core/common/mbed/xprintf.h b/tmk_core/common/mbed/xprintf.h index 26bc529e5..1e7a48c06 100644 --- a/tmk_core/common/mbed/xprintf.h +++ b/tmk_core/common/mbed/xprintf.h @@ -7,7 +7,7 @@ extern "C" { #endif -int xprintf(const char *format, ...); +int __xprintf(const char *format, ...); #ifdef __cplusplus } diff --git a/tmk_core/common/print.h b/tmk_core/common/print.h index a1352527f..8836c0fc7 100644 --- a/tmk_core/common/print.h +++ b/tmk_core/common/print.h @@ -36,40 +36,140 @@ #ifndef NO_PRINT +#if defined(__AVR__) /* __AVR__ */ -#if defined(__AVR__) +# include "avr/xprintf.h" -#include "avr/xprintf.h" -#define print(s) xputs(PSTR(s)) -#define println(s) xputs(PSTR(s "\r\n")) +# ifdef USER_PRINT /* USER_PRINT */ -#ifdef __cplusplus +// Remove normal print defines +# define print(s) +# define println(s) +# undef xprintf +# define xprintf(fmt, ...) + +// Create user print defines +# define uprint(s) xputs(PSTR(s)) +# define uprintln(s) xputs(PSTR(s "\r\n")) +# define uprintf(fmt, ...) __xprintf(PSTR(fmt), ##__VA_ARGS__) + +# else /* NORMAL PRINT */ + +// Create user & normal print defines +# define print(s) xputs(PSTR(s)) +# define println(s) xputs(PSTR(s "\r\n")) +# define uprint(s) print(s) +# define uprintln(s) println(s) +# define uprintf(fmt, ...) xprintf(fmt, ...) + +# endif /* USER_PRINT / NORMAL PRINT */ + +# ifdef __cplusplus extern "C" -#endif +# endif + /* function pointer of sendchar to be used by print utility */ void print_set_sendchar(int8_t (*print_sendchar_func)(uint8_t)); -#elif defined(PROTOCOL_CHIBIOS) /* __AVR__ */ +#elif defined(PROTOCOL_CHIBIOS) /* PROTOCOL_CHIBIOS */ + +# include "chibios/printf.h" + +# ifdef USER_PRINT /* USER_PRINT */ + +// Remove normal print defines +# define print(s) +# define println(s) +# define xprintf(fmt, ...) + +// Create user print defines +# define uprint(s) printf(s) +# define uprintln(s) printf(s "\r\n") +# define uprintf printf + +# else /* NORMAL PRINT */ + +// Create user & normal print defines +# define print(s) printf(s) +# define println(s) printf(s "\r\n") +# define xprintf printf +# define uprint(s) printf(s) +# define uprintln(s) printf(s "\r\n") +# define uprintf printf -#include "chibios/printf.h" +# endif /* USER_PRINT / NORMAL PRINT */ -#define print(s) printf(s) -#define println(s) printf(s "\r\n") -#define xprintf printf +#elif defined(__arm__) /* __arm__ */ -#elif defined(__arm__) /* __AVR__ */ +# include "mbed/xprintf.h" -#include "mbed/xprintf.h" +# ifdef USER_PRINT /* USER_PRINT */ -#define print(s) xprintf(s) -#define println(s) xprintf(s "\r\n") +// Remove normal print defines +# define print(s) +# define println(s) +# define xprintf(fmt, ...) + +// Create user print defines +# define uprintf(fmt, ...) __xprintf(fmt, ...) +# define uprint(s) xprintf(s) +# define uprintln(s) xprintf(s "\r\n") + +# else /* NORMAL PRINT */ + +// Create user & normal print defines +# define xprintf(fmt, ...) __xprintf(fmt, ...) +# define print(s) xprintf(s) +# define println(s) xprintf(s "\r\n") +# define uprint(s) print(s) +# define uprintln(s) println(s) +# define uprintf(fmt, ...) xprintf(fmt, ...) + +# endif /* USER_PRINT / NORMAL PRINT */ /* TODO: to select output destinations: UART/USBSerial */ -#define print_set_sendchar(func) +# define print_set_sendchar(func) + +#endif /* __AVR__ / PROTOCOL_CHIBIOS / __arm__ */ + +// User print disables the normal print messages in the body of QMK/TMK code and +// is meant as a lightweight alternative to NOPRINT. Use it when you only want to do +// a spot of debugging but lack flash resources for allowing all of the codebase to +// print (and store their wasteful strings). +// +// !!! DO NOT USE USER PRINT CALLS IN THE BODY OF QMK/TMK !!! +// +#ifdef USER_PRINT -#endif /* __AVR__ */ +// Disable normal print +#define print_dec(data) +#define print_decs(data) +#define print_hex4(data) +#define print_hex8(data) +#define print_hex16(data) +#define print_hex32(data) +#define print_bin4(data) +#define print_bin8(data) +#define print_bin16(data) +#define print_bin32(data) +#define print_bin_reverse8(data) +#define print_bin_reverse16(data) +#define print_bin_reverse32(data) +#define print_val_dec(v) +#define print_val_decs(v) +#define print_val_hex8(v) +#define print_val_hex16(v) +#define print_val_hex32(v) +#define print_val_bin8(v) +#define print_val_bin16(v) +#define print_val_bin32(v) +#define print_val_bin_reverse8(v) +#define print_val_bin_reverse16(v) +#define print_val_bin_reverse32(v) +#else /* NORMAL_PRINT */ +//Enable normal print /* decimal */ #define print_dec(i) xprintf("%u", i) #define print_decs(i) xprintf("%d", i) @@ -99,6 +199,39 @@ void print_set_sendchar(int8_t (*print_sendchar_func)(uint8_t)); #define print_val_bin_reverse16(v) xprintf(#v ": %016b\n", bitrev16(v)) #define print_val_bin_reverse32(v) xprintf(#v ": %032lb\n", bitrev32(v)) +#endif /* USER_PRINT / NORMAL_PRINT */ + +// User Print + +/* decimal */ +#define uprint_dec(i) uprintf("%u", i) +#define uprint_decs(i) uprintf("%d", i) +/* hex */ +#define uprint_hex4(i) uprintf("%X", i) +#define uprint_hex8(i) uprintf("%02X", i) +#define uprint_hex16(i) uprintf("%04X", i) +#define uprint_hex32(i) uprintf("%08lX", i) +/* binary */ +#define uprint_bin4(i) uprintf("%04b", i) +#define uprint_bin8(i) uprintf("%08b", i) +#define uprint_bin16(i) uprintf("%016b", i) +#define uprint_bin32(i) uprintf("%032lb", i) +#define uprint_bin_reverse8(i) uprintf("%08b", bitrev(i)) +#define uprint_bin_reverse16(i) uprintf("%016b", bitrev16(i)) +#define uprint_bin_reverse32(i) uprintf("%032lb", bitrev32(i)) +/* print value utility */ +#define uprint_val_dec(v) uprintf(#v ": %u\n", v) +#define uprint_val_decs(v) uprintf(#v ": %d\n", v) +#define uprint_val_hex8(v) uprintf(#v ": %X\n", v) +#define uprint_val_hex16(v) uprintf(#v ": %02X\n", v) +#define uprint_val_hex32(v) uprintf(#v ": %04lX\n", v) +#define uprint_val_bin8(v) uprintf(#v ": %08b\n", v) +#define uprint_val_bin16(v) uprintf(#v ": %016b\n", v) +#define uprint_val_bin32(v) uprintf(#v ": %032lb\n", v) +#define uprint_val_bin_reverse8(v) uprintf(#v ": %08b\n", bitrev(v)) +#define uprint_val_bin_reverse16(v) uprintf(#v ": %016b\n", bitrev16(v)) +#define uprint_val_bin_reverse32(v) uprintf(#v ": %032lb\n", bitrev32(v)) + #else /* NO_PRINT */ #define xprintf(fmt, ...) @@ -143,5 +276,4 @@ void print_set_sendchar(int8_t (*print_sendchar_func)(uint8_t)); #define pbin_reverse(data) print_bin_reverse8(data) #define pbin_reverse16(data) print_bin_reverse16(data) - #endif diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index e2c9d9bf1..d0c72c46c 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -28,6 +28,12 @@ #include "led.h" #endif +#ifdef NKRO_ENABLE + #include "keycode_config.h" + + extern keymap_config_t keymap_config; +#endif + /* --------------------------------------------------------- * Global interface variables and declarations * --------------------------------------------------------- @@ -39,9 +45,6 @@ uint16_t keyboard_led_stats __attribute__((aligned(2))) = 0; volatile uint16_t keyboard_idle_count = 0; static virtual_timer_t keyboard_idle_timer; static void keyboard_idle_timer_cb(void *arg); -#ifdef NKRO_ENABLE -extern bool keyboard_nkro; -#endif /* NKRO_ENABLE */ report_keyboard_t keyboard_report_sent = {{0}}; #ifdef MOUSE_ENABLE @@ -943,8 +946,8 @@ static bool usb_request_hook_cb(USBDriver *usbp) { if((usbp->setup[4] == KBD_INTERFACE) && (usbp->setup[5] == 0)) { /* wIndex */ keyboard_protocol = ((usbp->setup[2]) != 0x00); /* LSB(wValue) */ #ifdef NKRO_ENABLE - keyboard_nkro = !!keyboard_protocol; - if(!keyboard_nkro && keyboard_idle) { + keymap_config.nkro = !!keyboard_protocol; + if(!keymap_config.nkro && keyboard_idle) { #else /* NKRO_ENABLE */ if(keyboard_idle) { #endif /* NKRO_ENABLE */ @@ -962,7 +965,7 @@ static bool usb_request_hook_cb(USBDriver *usbp) { keyboard_idle = usbp->setup[3]; /* MSB(wValue) */ /* arm the timer */ #ifdef NKRO_ENABLE - if(!keyboard_nkro && keyboard_idle) { + if(!keymap_config.nkro && keyboard_idle) { #else /* NKRO_ENABLE */ if(keyboard_idle) { #endif /* NKRO_ENABLE */ @@ -1089,7 +1092,7 @@ static void keyboard_idle_timer_cb(void *arg) { } #ifdef NKRO_ENABLE - if(!keyboard_nkro && keyboard_idle) { + if(!keymap_config.nkro && keyboard_idle) { #else /* NKRO_ENABLE */ if(keyboard_idle) { #endif /* NKRO_ENABLE */ @@ -1122,7 +1125,7 @@ void send_keyboard(report_keyboard_t *report) { osalSysUnlock(); #ifdef NKRO_ENABLE - if(keyboard_nkro) { /* NKRO protocol */ + if(keymap_config.nkro) { /* NKRO protocol */ /* need to wait until the previous packet has made it through */ /* can rewrite this using the synchronous API, then would wait * until *after* the packet has been transmitted. I think diff --git a/tmk_core/protocol/lufa/descriptor.h b/tmk_core/protocol/lufa/descriptor.h index 316650a7b..c6c94e361 100644 --- a/tmk_core/protocol/lufa/descriptor.h +++ b/tmk_core/protocol/lufa/descriptor.h @@ -1,4 +1,4 @@ -/* +/* * Copyright 2012,2013 Jun Wako <wakojun@gmail.com> * This file is based on: * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse @@ -129,13 +129,13 @@ typedef struct # define MOUSE_INTERFACE (KEYBOARD_INTERFACE + 1) #else # define MOUSE_INTERFACE KEYBOARD_INTERFACE -#endif +#endif #ifdef EXTRAKEY_ENABLE # define EXTRAKEY_INTERFACE (MOUSE_INTERFACE + 1) #else # define EXTRAKEY_INTERFACE MOUSE_INTERFACE -#endif +#endif #ifdef CONSOLE_ENABLE # define CONSOLE_INTERFACE (EXTRAKEY_INTERFACE + 1) @@ -171,7 +171,7 @@ typedef struct #define KEYBOARD_IN_EPNUM 1 #ifdef MOUSE_ENABLE -# define MOUSE_IN_EPNUM (KEYBOARD_IN_EPNUM + 1) +# define MOUSE_IN_EPNUM (KEYBOARD_IN_EPNUM + 1) #else # define MOUSE_IN_EPNUM KEYBOARD_IN_EPNUM #endif @@ -179,7 +179,7 @@ typedef struct #ifdef EXTRAKEY_ENABLE # define EXTRAKEY_IN_EPNUM (MOUSE_IN_EPNUM + 1) #else -# define EXTRAKEY_IN_EPNUM MOUSE_IN_EPNUM +# define EXTRAKEY_IN_EPNUM MOUSE_IN_EPNUM #endif #ifdef CONSOLE_ENABLE @@ -226,7 +226,7 @@ typedef struct #define MOUSE_EPSIZE 8 #define EXTRAKEY_EPSIZE 8 #define CONSOLE_EPSIZE 32 -#define NKRO_EPSIZE 16 +#define NKRO_EPSIZE 32 #define MIDI_STREAM_EPSIZE 64 #define CDC_NOTIFICATION_EPSIZE 8 #define CDC_EPSIZE 16 diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 9b201374a..01c0e45b0 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -52,6 +52,13 @@ #include "descriptor.h" #include "lufa.h" +#ifdef NKRO_ENABLE + #include "keycode_config.h" + + extern keymap_config_t keymap_config; +#endif + + #ifdef AUDIO_ENABLE #include <audio.h> #endif @@ -502,7 +509,7 @@ static void send_keyboard(report_keyboard_t *report) /* Select the Keyboard Report Endpoint */ #ifdef NKRO_ENABLE - if (keyboard_protocol && keyboard_nkro) { + if (keyboard_protocol && keymap_config.nkro) { /* Report protocol - NKRO */ Endpoint_SelectEndpoint(NKRO_IN_EPNUM); diff --git a/tmk_core/protocol/pjrc/usb.c b/tmk_core/protocol/pjrc/usb.c index 1e6ba8719..09efbe076 100644 --- a/tmk_core/protocol/pjrc/usb.c +++ b/tmk_core/protocol/pjrc/usb.c @@ -1,17 +1,17 @@ /* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board * http://www.pjrc.com/teensy/usb_keyboard.html * Copyright (c) 2009 PJRC.COM, LLC - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE @@ -41,6 +41,12 @@ #include "action.h" #include "action_util.h" +#ifdef NKRO_ENABLE + #include "keycode_config.h" + + extern keymap_config_t keymap_config; +#endif + /************************************************************************** * @@ -694,7 +700,7 @@ ISR(USB_GEN_vect) } /* TODO: should keep IDLE rate on each keyboard interface */ #ifdef NKRO_ENABLE - if (!keyboard_nkro && keyboard_idle && (++div4 & 3) == 0) { + if (!keymap_config.nkro && keyboard_idle && (++div4 & 3) == 0) { #else if (keyboard_idle && (++div4 & 3) == 0) { #endif @@ -881,7 +887,7 @@ ISR(USB_COM_vect) #endif if (bmRequestType == 0x00 && wValue == DEVICE_REMOTE_WAKEUP) { if (bRequest == SET_FEATURE) { - remote_wakeup = true; + remote_wakeup = true; } else { remote_wakeup = false; } @@ -932,7 +938,7 @@ ISR(USB_COM_vect) if (bRequest == HID_SET_PROTOCOL) { keyboard_protocol = wValue; #ifdef NKRO_ENABLE - keyboard_nkro = !!keyboard_protocol; + keymap_config.nkro = !!keyboard_protocol; #endif clear_keyboard(); //usb_wait_in_ready(); diff --git a/tmk_core/protocol/pjrc/usb_keyboard.c b/tmk_core/protocol/pjrc/usb_keyboard.c index 4b87b5d7b..05f479734 100644 --- a/tmk_core/protocol/pjrc/usb_keyboard.c +++ b/tmk_core/protocol/pjrc/usb_keyboard.c @@ -30,6 +30,12 @@ #include "util.h" #include "host.h" +#ifdef NKRO_ENABLE + #include "keycode_config.h" + + extern keymap_config_t keymap_config; +#endif + // protocol setting from the host. We use exactly the same report // either way, so this variable only stores the setting since we @@ -56,7 +62,7 @@ int8_t usb_keyboard_send_report(report_keyboard_t *report) int8_t result = 0; #ifdef NKRO_ENABLE - if (keyboard_nkro) + if (keymap_config.nkro) result = send_report(report, KBD2_ENDPOINT, 0, KBD2_SIZE); else #endif diff --git a/tmk_core/readme.md b/tmk_core/readme.md index f460d0ed4..324232851 100644 --- a/tmk_core/readme.md +++ b/tmk_core/readme.md @@ -23,7 +23,7 @@ These features can be used in your keyboard. * Mouse key - Mouse control with keyboard * System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up * Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc -* USB NKRO - 120 keys(+ 8 modifiers) simultaneously +* USB NKRO - 240 keys(+ 8 modifiers) simultaneously * PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device * Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols * User Function - Customizable function of key with writing code |