diff options
| -rw-r--r-- | keyboard/atomic/Makefile | 78 | ||||
| -rw-r--r-- | keyboard/atomic/config.h | 2 | ||||
| -rw-r--r-- | keyboard/atomic/keymaps/pvc/makefile.mk | 16 | ||||
| -rw-r--r-- | keyboard/atomic/keymaps/pvc/pvc_atomic.c (renamed from keyboard/atomic/keymaps/pvc_atomic.c) | 170 | ||||
| -rw-r--r-- | keyboard/planck/Makefile | 24 | ||||
| -rw-r--r-- | keyboard/planck/config.h | 4 | ||||
| -rw-r--r-- | keyboard/planck/keymaps/pvc_planck.c | 71 | ||||
| -rw-r--r-- | tmk_core/common/action_layer.h | 1 |
8 files changed, 315 insertions, 51 deletions
diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile index 20cf4fff1..364efa3fa 100644 --- a/keyboard/atomic/Makefile +++ b/keyboard/atomic/Makefile @@ -27,7 +27,7 @@ # make flip-ee = Download the eeprom file to the device, using Atmel FLIP # (must have Atmel FLIP installed). # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -38,6 +38,27 @@ # To rebuild project do "make clean" then "make all". #---------------------------------------------------------------------------- +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: + # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + # Target file name (without extension). TARGET = atomic @@ -50,15 +71,42 @@ TMK_DIR = ../../tmk_core TARGET_DIR = . # # project specific files -SRC = atomic.c \ - backlight.c +SRC = atomic.c + +ifdef keymap + KEYMAP = $(keymap) +endif ifdef KEYMAP - SRC := keymaps/$(KEYMAP).c $(SRC) +ifneq ("$(wildcard keymaps/$(KEYMAP).c)","") + KEYMAP_FILE = keymaps/$(KEYMAP).c +else +ifneq ("$(wildcard keymaps/$(KEYMAP)/keymap.c)","") + KEYMAP_FILE = keymaps/$(KEYMAP)/keymap.c +ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","") + include keymaps/$(KEYMAP)/makefile.mk +endif +else +$(error Keymap file does not exist) +endif +endif + +else + +ifneq ("$(wildcard keymaps/default.c)","") + KEYMAP_FILE = keymaps/default.c else - SRC := keymaps/default.c $(SRC) + KEYMAP_FILE = keymaps/default/keymap.c endif +ifneq ("$(wildcard keymaps/default/makefile.mk)","") + include keymaps/default/makefile.mk +endif + +endif + +SRC := $(KEYMAP_FILE) $(SRC) + CONFIG_H = config.h # MCU name @@ -111,22 +159,10 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DBOOTLOADER_SIZE=4096 -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -#MIDI_ENABLE = yes # MIDI controls -#UNICODE_ENABLE = yes # Unicode -#BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +ifeq ($(BACKLIGHT_ENABLE), yes) + SRC += backlight.c +endif -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax @@ -136,4 +172,4 @@ VPATH += $(TARGET_DIR) VPATH += $(TOP_DIR) VPATH += $(TMK_DIR) -include $(TOP_DIR)/quantum/quantum.mk +include $(TOP_DIR)/quantum/quantum.mk
\ No newline at end of file diff --git a/keyboard/atomic/config.h b/keyboard/atomic/config.h index f30a9e6cc..1b34decf9 100644 --- a/keyboard/atomic/config.h +++ b/keyboard/atomic/config.h @@ -130,7 +130,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define MAGIC_KEY_LAYER7 7 //#define MAGIC_KEY_LAYER8 8 //#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE +#define MAGIC_KEY_BOOTLOADER B //#define MAGIC_KEY_LOCK CAPS //#define MAGIC_KEY_EEPROM E //#define MAGIC_KEY_NKRO N diff --git a/keyboard/atomic/keymaps/pvc/makefile.mk b/keyboard/atomic/keymaps/pvc/makefile.mk new file mode 100644 index 000000000..ff0a9c338 --- /dev/null +++ b/keyboard/atomic/keymaps/pvc/makefile.mk @@ -0,0 +1,16 @@ +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: + # https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboard/atomic/keymaps/pvc_atomic.c b/keyboard/atomic/keymaps/pvc/pvc_atomic.c index b18e3a377..3ddd3e329 100644 --- a/keyboard/atomic/keymaps/pvc_atomic.c +++ b/keyboard/atomic/keymaps/pvc/pvc_atomic.c @@ -1,9 +1,12 @@ #include "atomic.h" +#include "action_layer.h" #define _QW 0 #define _LW 1 #define _RS 2 #define _FN 3 +#define _F1 4 +#define _F2 5 #define _______ KC_TRNS #define ___T___ KC_TRNS @@ -29,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, XXXXXXX, KC_PGUP }, { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, XXXXXXX, KC_UP, KC_PGDN }, - { KC_LCTL, KC_LGUI, MO(_FN), KC_LALT, MO(_RS), KC_SPC, XXXXXXX, MO(_LW), KC_RALT, KC_HOME, KC_END, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, + { KC_LCTL, KC_LGUI, M(_FN), KC_LALT, M(_RS), KC_SPC, XXXXXXX, M(_LW), KC_RALT, KC_HOME, KC_END, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT }, }, [_LW] = { /* LOWERED */ { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, @@ -52,18 +55,167 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D }, { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, }, + [_F1] = { /* FUNCTION */ + { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, + { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D }, + { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, + }, + [_F2] = { /* FUNCTION */ + { KC_NLCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, + { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ___T___, ___T___, KC_MS_U, KC_WH_D }, + { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R }, + }, }; +#define IS_LAYER_ON(layer) ((layer_state) & (1<<(layer))) +#define IS_LAYER_OFF(layer) ((!layer_state) & (1<<(layer))) + +void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) +{ + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) + { + layer_on(layer3); + } + else + { + layer_off(layer3); + } +} + +void update_quad_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3, uint8_t layer4, bool order) +{ + if (order) + { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) + { + layer_on(layer3); + } + else + { + layer_off(layer3); + layer_off(layer4); + } + } + else + { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) + { + layer_on(layer4); + } + else + { + layer_off(layer3); + layer_off(layer4); + } + } +} + +/* ignore me +void change_quad_layer(uint8_t focus_layer, bool desired_focus_layer_state, uint8_t pair_layer, uint8_t layer3, uint8_t layer4) +{ + + // If desired focus layer state == 1 and current focus layer state == 1 + if ((desired_focus_layer_state) && IS_LAYER_ON(layer1)) + { + // Do Nothing + } + // If desired focus layer state == 0 and current focus layer state == 1 + else if ((desired_focus_layer_state) && IS_LAYER_ON(layer1)) + { + // If + layer_off(layer3); + layer_off(layer4); + } + } + else + { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) + { + layer_on(layer4); + } + else + { + layer_off(layer3); + layer_off(layer4); + } + } +} +*/ + const uint16_t PROGMEM fn_actions[] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - return MACRODOWN(TYPE(KC_T), END); - break; - } - return MACRO_NONE; + + // MACRODOWN only works in this function + switch(id) + { + case _FN: + if (record->event.pressed) { + print("FN_DN\n"); + print_val_bin32(layer_state); + layer_on(_FN); + print_val_bin32(layer_state); + } else { + print("FN_UP\n"); + print_val_bin32(layer_state); + layer_off(_FN); + print_val_bin32(layer_state); + } + break; + + case _RS: + if (record->event.pressed) { + print("RS_DN\n"); + print_val_bin32(layer_state); + layer_on(_RS); + //tri_layer++; + print_val_bin32(layer_state); + //update_tri_layer(_RS, _LW, _FN); + update_quad_layer(_RS, _LW, _F1, _F2, 0); + print_val_bin32(layer_state); + } else { + print("RS_UP\n"); + print_val_bin32(layer_state); + layer_off(_RS); + //tri_layer--; + print_val_bin32(layer_state); + //update_tri_layer(_RS, _LW, _FN); + update_quad_layer(_RS, _LW, _F1, _F2, 0); + print_val_bin32(layer_state); + } + break; + + case _LW: + if (record->event.pressed) { + print("LW_DN\n"); + print_val_bin32(layer_state); + layer_on(_LW); + //tri_layer++; + print_val_bin32(layer_state); + //update_tri_layer(_RS, _LW, _FN); + update_quad_layer(_RS, _LW, _F1, _F2, 1); + print_val_bin32(layer_state); + } else { + print("LW_UP\n"); + print_val_bin32(layer_state); + layer_off(_LW); + //tri_layer--; + print_val_bin32(layer_state); + //update_tri_layer(_RS, _LW, _FN); + update_quad_layer(_RS, _LW, _F1, _F2, 1); + print_val_bin32(layer_state); + } + break; + + default: + break; + } + return MACRO_NONE; }; diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index dc6e46df2..992679f47 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -159,7 +159,31 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DBOOTLOADER_SIZE=4096 +<<<<<<< HEAD +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = yes # MIDI controls +# AUDIO_ENABLE = yes # Audio output on port C6 +# UNICODE_ENABLE = yes # Unicode +# BLUETOOTH_ENABLE = ye # Enable Bluetooth with the Adafruit EZ-Key HID +# RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend + + +ifdef BACKLIGHT_ENABLE +======= ifeq ($(BACKLIGHT_ENABLE), yes) +>>>>>>> master SRC += backlight.c endif diff --git a/keyboard/planck/config.h b/keyboard/planck/config.h index d3719e0cb..7d64f0977 100644 --- a/keyboard/planck/config.h +++ b/keyboard/planck/config.h @@ -73,10 +73,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ /* disable debug print */ -#define NO_DEBUG +//#define NO_DEBUG /* disable print */ -#define NO_PRINT +//#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER diff --git a/keyboard/planck/keymaps/pvc_planck.c b/keyboard/planck/keymaps/pvc_planck.c index ed062609f..20bb5d86d 100644 --- a/keyboard/planck/keymaps/pvc_planck.c +++ b/keyboard/planck/keymaps/pvc_planck.c @@ -2,6 +2,8 @@ // this is the style you want to emulate. #include "planck.h" +#include "print.h" +#include "action_layer.h" #ifdef BACKLIGHT_ENABLE #include "backlight.h" #endif @@ -38,10 +40,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_QW] = { - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {RESET, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT }, - {KC_LCTL, KC_LGUI, KC_LALT, KC_DEL, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} + {KC_LCTL, KC_LGUI, KC_LALT, KC_DEL, M(_LW), KC_SPC, KC_SPC, M(_RS), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT} }, /* Colemak @@ -95,7 +97,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, RESET, _______}, - {_______, _______, _______, _______, MO(_FN), _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, /* Lower @@ -113,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, MG_B, _______}, - {_______, _______, _______, _______, _______, _______, _______, MO(_FN), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, /* Function @@ -139,20 +141,53 @@ const uint16_t PROGMEM fn_actions[] = { }; + +int tri_layer = 0; +void update_tri_layer(int layer) { + if (tri_layer > 1) { + layer_on(layer); + } else { + layer_off(layer); + } +} + + const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; + // MACRODOWN only works in this function + switch(id) + { + case _RS: + if (record->event.pressed) { + print("RS_DN"); + layer_on(_RS); + tri_layer++; + update_tri_layer(_FN); + } else { + print("RS_UP"); + layer_off(_RS); + tri_layer--; + update_tri_layer(_FN); + phex(layer_state); + } + break; + + case _LW: + if (record->event.pressed) { + print("LW_DN"); + layer_on(_LW); + tri_layer++; + update_tri_layer(_FN); + } else { + print("LW_UP"); + layer_off(_LW); + tri_layer--; + update_tri_layer(_FN); + } + break; + + default: + break; + } + return MACRO_NONE; }; diff --git a/tmk_core/common/action_layer.h b/tmk_core/common/action_layer.h index 3a4b1e334..025cf5420 100644 --- a/tmk_core/common/action_layer.h +++ b/tmk_core/common/action_layer.h @@ -68,6 +68,7 @@ void layer_xor(uint32_t state); #define layer_and(state) #define layer_xor(state) #define layer_debug() + #endif /* pressed actions cache */ |