diff options
22 files changed, 274 insertions, 216 deletions
diff --git a/keyboards/handwired/MS_sculpt_mobile/MS_sculpt_mobile.c b/keyboards/handwired/MS_sculpt_mobile/MS_sculpt_mobile.c deleted file mode 100644 index 64982fb62..000000000 --- a/keyboards/handwired/MS_sculpt_mobile/MS_sculpt_mobile.c +++ /dev/null @@ -1 +0,0 @@ -#include "MS_sculpt_mobile.h" diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/config.h b/keyboards/handwired/MS_sculpt_mobile/keymaps/default/config.h deleted file mode 100644 index 4f3a425b7..000000000 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../../MS_sculpt_mobile/config.h" - -// place overrides here - -#endif diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/readme.md b/keyboards/handwired/MS_sculpt_mobile/keymaps/default/readme.md deleted file mode 100644 index e67ddc6fe..000000000 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for microsoft-sculpt-mobile diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/readme.md b/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/readme.md deleted file mode 100644 index 96ee0e77a..000000000 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/readme.md +++ /dev/null @@ -1 +0,0 @@ -# A more programmer oriented keymap for microsoft-sculpt-mobile diff --git a/keyboards/handwired/MS_sculpt_mobile/readme.md b/keyboards/handwired/MS_sculpt_mobile/readme.md deleted file mode 100644 index d435b449f..000000000 --- a/keyboards/handwired/MS_sculpt_mobile/readme.md +++ /dev/null @@ -1,58 +0,0 @@ - -This is a way to take a Microsoft ergonomic bluetooth keyboard, and make it -into a hard-wired keyboard running QMK. - -The keyboard is known under several different names: -Mobile Bluetooth 5000, Mobile 6000, Sculpt mobile, and Asus rebranded - -I had a stack of them,since they're cheap on ebay, travel well, and are just ergo enough. - -The ribbon cable is 1mm pitch, which is hard to hand solder. I bought a cheap set of -"pitch adapter" boards https://www.amazon.com/Double-Sided-0-4mm-1-0-Adapter-60mmx38mm/dp/B00OK42118 - -Cut the original ribbon cable sockets off the bluetooth board using a razor, they're hard to desolder. -They're also allow the cable to be inserted on top or bottom. - -If I was going to do it again, I'd make the MCU connection come out the top of the keyboard -and avoid the wires dangling out the bottom. - -As I was debugging the matrix, I started to get random failures. In desparation I tried a second MCU, -but had the same problems. It turns out that the ribbon cable connections can get worn. Shave a -half millimeter off the end of the ribbon cable & the errors go away. - -My method for discovering the matrix was to set up a KEYMAP macro that included all pins. -See MATRIX_TESTING_KEYMAP if you need it. Then set up a keymap that has all printable symbols -in the first 4 rows. test each key & record output. Then switch the printable symbols to the -bottom 4 rows & repeat. This was enough to show the matrix. - - -The full original keymap for the sculpt is - A B C D E F G H ---> -0 b n m , . / -1 g h " -2 7 8 9 0 Del PgUp -3 p [ ] \ -4 y u i o -5 ~ - += j k l ; 5 -6 a s d q w e, Up left -7 F7 F8 F9 F10 F11 F12 f - ------> I J K L M N O P Q R -0 Caps FN -1 Vol+ mute Rctl vol- pgdn LCTL -2 Rshift LShift -3 Ralt LAlt -4 LGUI -5 6 bakspc 1 2 3 4 F4 F5 F6 -6 Down right spc F1 F2 F3 tab -7 r t z x c v enter Esc - -This works with 18 cols + 8 rows on a Teensy++, or Arm based Teensy. - -The Astar mini has all pins exposed , so you can do 18x8 -If you want a speaker, LEDs &etc, you'll need to free up a pin. I recommend joining columns -R and L to the same pin. - -Building - add ASTAR=1 to the compile line or leave out for teensy2++ - - diff --git a/keyboards/handwired/MS_sculpt_mobile/babblePaste.c b/keyboards/handwired/ms_sculpt_mobile/babblePaste.c index 22394cc7d..e03564870 100644 --- a/keyboards/handwired/MS_sculpt_mobile/babblePaste.c +++ b/keyboards/handwired/ms_sculpt_mobile/babblePaste.c @@ -1,13 +1,13 @@ -/* A library to output the right key shortcut in any common app. -Given a global variable babble_mode to show the environment and a -key that calls the paste macro, do the right type of paste. -Setting the context is done by another macro, or TBD interaction with the host. +/* A library to output the right key shortcut in any common app. +Given a global variable babble_mode to show the environment and a +key that calls the paste macro, do the right type of paste. +Setting the context is done by another macro, or TBD interaction with the host. Huge thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts -and https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/jeebak/keymap.c +and https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/jeebak/keymap.c */ -#include "../MS_sculpt_mobile/babblePaste.h" +#include "babblePaste.h" #include "action_macro.h" @@ -16,14 +16,14 @@ and https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/jee // GLOBAL variable to determine mode. Sets startup default if no eeppom uint8_t babble_mode =0 ; -// small function that we might also want to call from a keymap. +// small function that we might also want to call from a keymap. macro_t* switch_babble_mode( uint8_t id) { babble_mode= id; return MACRO_NONE; //less typing where called } - + // Today I learned that the preprocessor can not create a switch statement label from an argument // And else statements have problems, see https://gcc.gnu.org/onlinedocs/gcc-3.0.1/cpp_3.html#SEC15 #define BABLM(ent, macro...) \ @@ -32,8 +32,8 @@ macro_t* switch_babble_mode( uint8_t id) { /* this function runs the appropriate babblepaste macro, given -the global babble_mode, and a shortcut from the ENUM in babblePaste.h -TODO, the pointers in this function should be stored in a PROGMEM array, not ram. +the global babble_mode, and a shortcut from the ENUM in babblePaste.h +TODO, the pointers in this function should be stored in a PROGMEM array, not ram. But that requires even more clever preprocessor foo. */ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { @@ -43,20 +43,20 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { return MACRO_NONE; } */ - + #ifdef MS_MODE - if ( BABL_WINDOWS == shortcut ) { return switch_babble_mode(MS_MODE); } -#endif + if ( BABL_WINDOWS == shortcut ) { return switch_babble_mode(MS_MODE); } +#endif #ifdef MAC_MODE - if ( BABL_MAC == shortcut) { return switch_babble_mode(MAC_MODE); } + if ( BABL_MAC == shortcut) { return switch_babble_mode(MAC_MODE); } #endif #ifdef LINUX_MODE if ( BABL_LINUX == shortcut ) { return switch_babble_mode(LINUX_MODE); } -#endif +#endif #ifdef READMUX_MODE if ( BABL_READLINE == shortcut ) { switch_babble_mode(READMUX_MODE); return MACRO_NONE; } -#endif +#endif #ifdef VI_MODE if ( BABL_VI == shortcut ) { return switch_babble_mode(VI_MODE); } #endif @@ -66,11 +66,11 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { - switch(babble_mode) { + switch(babble_mode) { #ifdef MS_MODE - - case MS_MODE: + + case MS_MODE: BABLM( BABL_GO_LEFT_1C, T(LEFT), END ); BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END ); BABLM( BABL_GO_LEFT_WORD, D(LCTL), T(LEFT), U(LCTL), END ); @@ -93,7 +93,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_REDO, D(LCTL), T(Y), U(LCTL), END ); BABLM( BABL_CUT, D(LCTL), T(X), U(LCTL), END ); BABLM( BABL_COPY, D(LCTL), T(C), U(LCTL), END ); - BABLM( BABL_PASTE, D(LCTL), T(V), U(LCTL), END ); + BABLM( BABL_PASTE, D(LCTL), T(V), U(LCTL), END ); BABLM( BABL_SELECT_ALL, D(LCTL), T(A), U(LCTL), END ); BABLM( BABL_FIND, D(LCTL),T(F), U(LCTL),END ); BABLM( BABL_FIND_NEXT, T(F3),END ); @@ -114,7 +114,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_BROWSER_BACK, D(LALT), T(LEFT), U(LALT),END ); BABLM( BABL_BROWSER_FIND, D(LCTL), T(F), U(LCTL),END ); BABLM( BABL_BROWSER_BOOKMARK, D(LCTL), T(D), U(LCTL),END ); - //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LCTL),END ); // EDGE + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LCTL),END ); // EDGE BABLM( BABL_BROWSER_DEV_TOOLS, D(LCTL), T(T), U(LCTL),END ); // Chrome // Chrome BABLM( BABL_BROWSER_RELOAD, D(LCTL), T(F5), U(LCTL),END ); // hard reload w/o cache @@ -126,8 +126,8 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { // Todo, ring bell, flash light, show user this isn't supported return MACRO_NONE; - - + + #endif /* MS_MODE*/ @@ -146,7 +146,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_GO_PREV_LINE , T(UP), END ); BABLM( BABL_PGDN , T(PGDN), END ); BABLM( BABL_PGUP , T(PGUP), END ); - BABLM( BABL_DEL_RIGHT_1C , D(DEL), END ); + BABLM( BABL_DEL_RIGHT_1C , D(DEL), END ); BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(BSPACE), U(LCTL), END ); BABLM( BABL_DEL_RIGHT_WORD , D(LCTL), T(DEL), U(LCTL), END ); BABLM( BABL_DEL_TO_LINE_END, D(RSFT), T(HOME), U(RSFT), T(DEL), END); @@ -156,8 +156,8 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_REDO , D(LCTL), T(Y), U(LCTL), END ); BABLM( BABL_CUT , D(LCTL), T(X), U(LCTL), END ); BABLM( BABL_COPY , D(LCTL), T(C), U(LCTL), END ); - BABLM( BABL_PASTE , D(LCTL), T(V), U(LCTL), END ); - BABLM( BABL_SELECT_ALL, D(LCTL), T(A), U(LCTL), END ); + BABLM( BABL_PASTE , D(LCTL), T(V), U(LCTL), END ); + BABLM( BABL_SELECT_ALL, D(LCTL), T(A), U(LCTL), END ); BABLM( BABL_FIND, D(LCTL),T(F), U(LCTL),END ); /* BABLM(BABL_FIND_NEXT , T(F3),END ); KDE */ BABLM( BABL_FIND_NEXT, D(LCTL),T(G), U(LCTL),END ); // Gnome*/ @@ -167,7 +167,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_SWITCH_APP_NEXT, D(LCTL),T(TAB), U(LCTL),END ); BABLM( BABL_SWITCH_APP_LAST, D(LSFT),D(LCTL),T(TAB), U(LCTL), U(LSFT),END ); BABLM( BABL_CLOSE_APP, D(LALT),T(F4), U(LALT),END ); - //BABLM( BABL_HELP, END ); + //BABLM( BABL_HELP, END ); #ifndef BABL_NOBROWSER BABLM( BABL_BROWSER_NEW_TAB, D(LCTL), T(T), U(LCTL),END ); @@ -188,9 +188,9 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { #endif #endif return MACRO_NONE; - -#endif - + +#endif + #ifdef MAC_MODE case MAC_MODE: @@ -206,7 +206,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_GO_PREV_LINE , T(UP), END ); BABLM( BABL_PGDN , D(LALT),T(DOWN), U(LALT), END ); BABLM( BABL_PGUP , D(LALT),T(UP), U(LALT), END ); - BABLM( BABL_DEL_RIGHT_1C , D(DEL), END ); + BABLM( BABL_DEL_RIGHT_1C , D(DEL), END ); BABLM( BABL_DEL_LEFT_WORD , D(LALT), T(BSPACE), U(LALT), END ); BABLM( BABL_DEL_RIGHT_WORD, D(LALT), T(DEL), U(LALT), END ); BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END );// there must be another way @@ -216,7 +216,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_REDO , D(LSFT),D(LGUI), T(Z), U(LSFT),U(LGUI), END ); BABLM( BABL_CUT , D(LGUI), T(X), U(LGUI), END ); BABLM( BABL_COPY , D(LGUI), T(C), U(LGUI), END ); - BABLM( BABL_PASTE , D(LGUI), T(V), U(LGUI), END ); + BABLM( BABL_PASTE , D(LGUI), T(V), U(LGUI), END ); BABLM( BABL_SELECT_ALL , D(LGUI), T(A), U(LGUI), END ); BABLM( BABL_FIND , D(LGUI),T(F), U(LGUI),END ); BABLM( BABL_FIND_NEXT, D(LGUI),T(G), U(LGUI),END ); @@ -238,7 +238,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); - //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome // Chrome BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache @@ -247,10 +247,10 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END ); #endif #endif - + return MACRO_NONE; -#endif - +#endif + #ifdef EMACS_MODE case EMACS_MODE: @@ -269,18 +269,18 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_GO_PREV_LINE , D(LCTL), T(P), U(LCTL), END ); BABLM( BABL_PGDN , D(LCTL), T(V), U(LCTL), END ); BABLM( BABL_PGUP , D(LALT), T(V), U(LALT), END ); - BABLM( BABL_DEL_RIGHT_1C, D(LCTL), T(D), U(LCTL),END ); + BABLM( BABL_DEL_RIGHT_1C, D(LCTL), T(D), U(LCTL),END ); BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(BSPACE), U(LCTL), END ); BABLM( BABL_DEL_RIGHT_WORD , D(LALT), T(D), U(LALT), END ); - BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END ); + BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END ); BABLM( BABL_DEL_TO_LINE_START, T(ESC), T(0), D(LCTL), T(K), U(LCTL), END ); #ifndef BABL_MOVEMENTONLY BABLM( BABL_UNDO , D(LCTL), T(X), U(LCTL),T(C), END ); BABLM( BABL_REDO , D(LCTL), T(X), U(LCTL),T(C), END ); // arguably BABLM( BABL_CUT , D(LCTL), T(W), U(LCTL), END ); BABLM( BABL_COPY , D(LALT), T(W), U(LALT), END ); //really? - BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END ); - BABLM( BABL_SELECT_ALL ,D(LCTL), T(X), U(LCTL),T(H), END ); + BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END ); + BABLM( BABL_SELECT_ALL ,D(LCTL), T(X), U(LCTL),T(H), END ); BABLM( BABL_FIND , D(LCTL), T(S), U(LCTL),END ); BABLM( BABL_FIND_NEXT , D(LCTL), T(S), U(LCTL),END ); BABLM( BABL_FIND_REPLACE , D(LALT),D(LSFT), T(5),U(LSFT), U(LALT), END ); @@ -290,7 +290,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_CLOSE_APP , D(LCTL), T(X), U(LCTL),T(C),END ); BABLM( BABL_HELP , D(LCTL),T(H), U(LCTL),T(A),END); // start search in help #ifndef BABL_NOBROWSER -/* you get to figure w3 out +/* you get to figure w3 out BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END ); BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END ); BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END ); @@ -301,7 +301,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); - //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome // Chrome BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache @@ -312,18 +312,18 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { #endif #endif break; - + return MACRO_NONE; } - -#endif + +#endif #ifdef VI_MODE case VI_MODE: // you have to track the modes yourself. Otherwise motion is awful (bell, bell, bell) - - + + BABLM( BABL_GO_LEFT_1C , T(H), END ); BABLM( BABL_GO_RIGHT_1C , T(L), END ); BABLM( BABL_GO_LEFT_WORD , T(B),END ); @@ -336,18 +336,18 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_GO_PREV_LINE, T(K), END ); BABLM( BABL_PGDN ,D(LCTL), T(F), U(LCTL), END ); BABLM( BABL_PGUP , D(LCTL), T(B), U(LCTL), END ); - BABLM( BABL_DEL_RIGHT_1C , T(X),END ); + BABLM( BABL_DEL_RIGHT_1C , T(X),END ); BABLM( BABL_DEL_LEFT_WORD , T(D),T(G),T(E),END ); BABLM( BABL_DEL_RIGHT_WORD , T(D),T(W),END ); BABLM( BABL_DEL_TO_LINE_END, T(D),D(LSFT), T(4),U(LSFT) ,END ); // d$ - BABLM( BABL_DEL_TO_LINE_START, T(D),D(LSFT), T(6),U(LSFT) ,END ); + BABLM( BABL_DEL_TO_LINE_START, T(D),D(LSFT), T(6),U(LSFT) ,END ); #ifndef BABL_MOVEMENTONLY BABLM( BABL_UNDO , T(U), END ); - BABLM( BABL_REDO , D(LCTL), T(R), U(LCTL), END ); + BABLM( BABL_REDO , D(LCTL), T(R), U(LCTL), END ); BABLM( BABL_CUT , T(X), END ); BABLM( BABL_COPY , T(Y),END ); - BABLM( BABL_PASTE , T(P), END ); - BABLM( BABL_SELECT_ALL , D(LSFT), T(SCLN),U(LSFT),D(LSFT), T(5),U(LSFT),T(Y), END ); // wrong but helpful? + BABLM( BABL_PASTE , T(P), END ); + BABLM( BABL_SELECT_ALL , D(LSFT), T(SCLN),U(LSFT),D(LSFT), T(5),U(LSFT),T(Y), END ); // wrong but helpful? BABLM( BABL_FIND , T(SLASH),END ); BABLM( BABL_FIND_NEXT , T(N),END ); BABLM( BABL_FIND_REPLACE , D(LALT),D(LSFT), T(5),U(LSFT), U(LALT), END ); @@ -357,7 +357,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM(BABL_CLOSE_APP, D(LSFT), T(SCLN),U(LSFT), T(Q), D(RSFT), T(1),U(RSFT), END ); BABLM(BABL_HELP, D(LSFT), T(SCLN),U(LSFT),T(H),END); // start search in help #ifndef BABL_NOBROWSER -/* you get to figure this out +/* you get to figure this out BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END ); BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END ); BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END ); @@ -368,7 +368,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); - //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome // Chrome BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache @@ -377,8 +377,8 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_BROWSER_ZOOM_OUT, D(LGUI), T(MINS), U(LGUI),END ); */ #endif -#endif - return MACRO_NONE; +#endif + return MACRO_NONE; #endif @@ -387,10 +387,10 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { #ifdef READMUX_MODE // Readline command line editing + tmux windowing // I havent decided how much to do readline and how much tmux - - - case READMUX_MODE: - + + + case READMUX_MODE: + BABLM( BABL_GO_LEFT_1C , T(LEFT), END ); BABLM( BABL_GO_RIGHT_1C , T(RIGHT), END ); BABLM( BABL_GO_LEFT_WORD , D(LALT), T(B), U(LALT), END ); @@ -403,28 +403,28 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_GO_PREV_LINE , D(LCTL), T(P), U(LCTL), END ); BABLM( BABL_PGDN , T(PGDN), END ); BABLM( BABL_PGUP , T(PGUP), END ); - BABLM( BABL_DEL_RIGHT_1C , D(LCTL), T(D), U(LCTL),END ); + BABLM( BABL_DEL_RIGHT_1C , D(LCTL), T(D), U(LCTL),END ); BABLM( BABL_DEL_LEFT_WORD , D(LCTL), T(W), U(LCTL), END ); BABLM( BABL_DEL_RIGHT_WORD , D(LALT), T(D), U(LALT), END ); - BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END ); + BABLM( BABL_DEL_TO_LINE_END, D(LCTL), T(K), U(LCTL), END ); BABLM( BABL_DEL_TO_LINE_START, D(LCTL), T(U), U(LCTL), END ); #ifndef BABL_MOVEMENTONLY BABLM( BABL_UNDO , D(LALT), T(R), U(LALT) , END ); BABLM( BABL_REDO , D(LCTL), T(X), U(LCTL),T(C), END ); // arguably BABLM( BABL_CUT , D(LCTL), T(K), U(LCTL), END ); // wrong half the time - //BABLM( BABL_COPY ,END ); - BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END ); - BABLM( BABL_SELECT_ALL , D(LCTL), T(A), T(K), T(Y), U(LCTL) , END ); + //BABLM( BABL_COPY ,END ); + BABLM( BABL_PASTE , D(LCTL), T(Y), U(LCTL), END ); + BABLM( BABL_SELECT_ALL , D(LCTL), T(A), T(K), T(Y), U(LCTL) , END ); BABLM( BABL_FIND , D(LCTL), T(R), U(LCTL), END ); // search history BABLM(BABL_FIND_NEXT, D(LCTL), T(S), U(LCTL), END ); - //BABLM( BABL_FIND_REPLACE ,END ); + //BABLM( BABL_FIND_REPLACE ,END ); BABLM( BABL_RUNAPP , D(LCTL), T(B), U(LCTL), T(C),END ); //tmux BABLM( BABL_SWITCH_APP_NEXT , D(LCTL), T(B), U(LCTL), T(N),END ); //tmux BABLM( BABL_SWITCH_APP_LAST , D(LCTL), T(B), U(LCTL), T(P),END ); //tmux BABLM( BABL_CLOSE_APP , D(LCTL), T(B), U(LCTL), T(D),END); // usually what I want - // BABLM( BABL_HELP ,END ); + // BABLM( BABL_HELP ,END ); #ifndef BABL_NOBROWSER -/* Add lynx shortcuts? +/* Add lynx shortcuts? BABLM( BABL_BROWSER_NEW_TAB, D(LGUI), T(T), U(LGUI),END ); BABLM( BABL_BROWSER_CLOSE_TAB, D(LGUI), T(W), U(LGUI),END ); BABLM( BABL_BROWSER_REOPEN_LAST_TAB, D(LGUI), D(RSFT),T(T), U(RSFT),U(LGUI),END ); @@ -435,7 +435,7 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { BABLM( BABL_BROWSER_BACK, D(LGUI), T(LEFT), U(LGUI),END ); BABLM( BABL_BROWSER_FIND, D(LGUI), T(F), U(LGUI),END ); BABLM( BABL_BROWSER_BOOKMARK, D(LGUI), T(D), U(LGUI),END ); - //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE + //BABLM( BABL_BROWSER_DEV_TOOLS, T(F12), U(LGUI),END ); // EDGE BABLM( BABL_BROWSER_DEV_TOOLS, D(LGUI), D(LALT), T(I), U(LALT),U(LGUI),END ); // Chrome // Chrome BABLM( BABL_BROWSER_RELOAD, D(LGUI), T(R), U(LGUI),END ); // add shift for reload w/o cache @@ -445,12 +445,12 @@ const macro_t *babblePaste (keyrecord_t *record, uint8_t shortcut) { */ #endif #endif - + return MACRO_NONE; - -#endif - default: +#endif + + default: return MACRO_NONE; } diff --git a/keyboards/handwired/MS_sculpt_mobile/babblePaste.h b/keyboards/handwired/ms_sculpt_mobile/babblePaste.h index cedd7d92b..1e8206212 100644 --- a/keyboards/handwired/MS_sculpt_mobile/babblePaste.h +++ b/keyboards/handwired/ms_sculpt_mobile/babblePaste.h @@ -1,15 +1,15 @@ -/* A library to output the right key shortcut in any common app. -Given a global variable babble_mode to show the environment and a -key that calls the paste macro, do the right type of paste. +/* A library to output the right key shortcut in any common app. +Given a global variable babble_mode to show the environment and a +key that calls the paste macro, do the right type of paste. -Setting the bable_mode is done by another macro, or TBD interaction with the host. +Setting the bable_mode is done by another macro, or TBD interaction with the host. Huge thanks to https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts and jeebak & algernon's keymap */ #ifndef _babblePaste_h_included__ #define _babblePaste_h_included__ -#include "../MS_sculpt_mobile/config.h" +#include "config.h" #include "action_layer.h" #include "quantum_keycodes.h" @@ -18,11 +18,11 @@ and jeebak & algernon's keymap /* *************************** // Uncomment any modes you want. Whatever mode = 0 will be the default on boot -// Expect to get errors if you comment a feature out and leave it in your keymap. +// Expect to get errors if you comment a feature out and leave it in your keymap. #define USE_BABLPASTE -//#define MS_MODE 0 // Windows. +//#define MS_MODE 0 // Windows. //#define MAC_MODE 1 //#define LINUX_MODE 2 //aka gnome+KDE //#define EMACS_MODE 3 @@ -42,7 +42,7 @@ and jeebak & algernon's keymap //#define BABL_MOVEMENTONLY -// Define starting number for BABL macros in the macro range. +// Define starting number for BABL macros in the macro range. // Probably can start the default even lower #define BABL_START_NUM 50 @@ -53,7 +53,7 @@ enum { // left & right BABL_GO_LEFT_1C= BABL_START_NUM, BABL_GO_RIGHT_1C, - BABL_GO_LEFT_WORD, + BABL_GO_LEFT_WORD, BABL_GO_RIGHT_WORD, BABL_GO_START_LINE, BABL_GO_END_LINE, @@ -65,7 +65,7 @@ enum { BABL_PGDN, BABL_PGUP, // And the delete options - //BABL_DEL_LEFT_1C == backspace, so why bother. + //BABL_DEL_LEFT_1C == backspace, so why bother. BABL_DEL_RIGHT_1C, // usually = Del BABL_DEL_LEFT_WORD, BABL_DEL_RIGHT_WORD, @@ -110,7 +110,7 @@ enum { BABL_BROWSER_FULLSCREEN, BABL_BROWSER_ZOOM_IN, BABL_BROWSER_ZOOM_OUT, - + #endif #endif @@ -137,8 +137,8 @@ enum { }; -// BUG, used to jump to babble functiion. Surely there is a way to calculate size of enum? -#define BABL_NUM_MACROS 48+4 // 48 + # of defined modes. +// BUG, used to jump to babble functiion. Surely there is a way to calculate size of enum? +#define BABL_NUM_MACROS 48+4 // 48 + # of defined modes. /* And all the shorthand keymap ready versions */ // First the mode switching macros @@ -161,7 +161,7 @@ enum { #define B_READ M(BABL_READLINE) #endif -// and all the movement & action. +// and all the movement & action. #define B_L1C M(BABL_GO_LEFT_1C) #define B_R1C M(BABL_GO_RIGHT_1C) @@ -175,7 +175,7 @@ enum { #define B_UP M(BABL_GO_PREV_LINE) #define B_PGDN M(BABL_PGDN) #define B_PGUP M(BABL_PGUP) -//#define B_BKSP M(BABL_DEL_LEFT_1C) == backspace so why bother. +//#define B_BKSP M(BABL_DEL_LEFT_1C) == backspace so why bother. #define B_DEL M(BABL_DEL_RIGHT_1C) // usually = Del #define B_DLW M(BABL_DEL_LEFT_WORD) #define B_DRW M(BABL_DEL_RIGHT_WORD) @@ -210,8 +210,8 @@ enum { #define B_BFUlL M(BABL_BROWSER_FULLSCREEN) #define B_ZMIN M(BABL_BROWSER_ZOOM_IN) #define B_ZMOT M(BABL_BROWSER_ZOOM_OUT) - - + + diff --git a/keyboards/handwired/MS_sculpt_mobile/babblePaste.txt b/keyboards/handwired/ms_sculpt_mobile/babblePaste.txt index cf75e153e..cf75e153e 100644 --- a/keyboards/handwired/MS_sculpt_mobile/babblePaste.txt +++ b/keyboards/handwired/ms_sculpt_mobile/babblePaste.txt diff --git a/keyboards/handwired/MS_sculpt_mobile/config.h b/keyboards/handwired/ms_sculpt_mobile/config.h index c3bdf333e..c3bdf333e 100644 --- a/keyboards/handwired/MS_sculpt_mobile/config.h +++ b/keyboards/handwired/ms_sculpt_mobile/config.h diff --git a/keyboards/handwired/ms_sculpt_mobile/info.json b/keyboards/handwired/ms_sculpt_mobile/info.json new file mode 100644 index 000000000..86d5fde2e --- /dev/null +++ b/keyboards/handwired/ms_sculpt_mobile/info.json @@ -0,0 +1,96 @@ +{ + "keyboard_name": "MS Sculpt Mobile", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 6, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + {"label":"PrtSc", "x":13, "y":0}, + {"label":"Home", "x":14, "y":0}, + {"label":"End", "x":15, "y":0}, + {"label":"`", "x":0, "y":1}, + {"label":"1", "x":1, "y":1}, + {"label":"2", "x":2, "y":1}, + {"label":"3", "x":3, "y":1}, + {"label":"4", "x":4, "y":1}, + {"label":"5", "x":5, "y":1}, + {"label":"6", "x":6, "y":1}, + {"label":"7", "x":7, "y":1}, + {"label":"8", "x":8, "y":1}, + {"label":"9", "x":9, "y":1}, + {"label":"0", "x":10, "y":1}, + {"label":"-", "x":11, "y":1}, + {"label":"=", "x":12, "y":1}, + {"label":"Backspace", "x":13, "y":1, "w":2}, + {"label":"Del", "x":15, "y":1, "h":1.6}, + {"label":"Tab", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"[", "x":11.5, "y":2}, + {"label":"]", "x":12.5, "y":2}, + {"label":"\\", "x":13.5, "y":2, "w":1.5}, + {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":";", "x":10.75, "y":3}, + {"label":"'", "x":11.75, "y":3}, + {"label":"Enter", "x":12.75, "y":3, "w":2.25}, + {"label":"PgUp", "x":15, "y":2.6, "h":1.2}, + {"label":"LShift", "x":0, "y":4, "w":2.25}, + {"label":"Z", "x":2.25, "y":4}, + {"label":"X", "x":3.25, "y":4}, + {"label":"C", "x":4.25, "y":4}, + {"label":"V", "x":5.25, "y":4}, + {"label":"B", "x":6.25, "y":4}, + {"label":"N", "x":7.25, "y":4}, + {"label":"M", "x":8.25, "y":4}, + {"label":",", "x":9.25, "y":4}, + {"label":".", "x":10.25, "y":4}, + {"label":"/", "x":11.25, "y":4}, + {"label":"RShift", "x":12.25, "y":4, "w":1.75}, + {"label":"Up", "x":14, "y":4}, + {"label":"PgDn", "x":15, "y":3.8, "h":1.2}, + {"label":"LCtrl", "x":0, "y":5, "w":1.25}, + {"label":"LWin", "x":1.25, "y":5, "w":1.25}, + {"label":"LAlt", "x":2.5, "y":5, "w":1.25}, + {"label":"Space", "x":3.75, "y":5, "w":5.5}, + {"label":"RAlt", "x":9.25, "y":5, "w":1.25}, + {"label":"Fn", "x":10.5, "y":5, "w":1.25}, + {"label":"RCtrl", "x":11.75, "y":5, "w":1.25}, + {"label":"Left", "x":13, "y":5}, + {"label":"Down", "x":14, "y":5}, + {"label":"Right", "x":15, "y":5} + ] + } + } +} diff --git a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/config.h b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/config.h new file mode 100644 index 000000000..271f48d00 --- /dev/null +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/config.h @@ -0,0 +1,3 @@ +#pragma once + +// place overrides here diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/keymap.c b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/keymap.c index a8802c99a..d4d0f33e9 100644 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/keymap.c +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/keymap.c @@ -1,7 +1,7 @@ -#include "../../MS_sculpt_mobile.h" +#include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* +/* * * |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|Mute| * -------------------------------------------------------------------------------' @@ -10,42 +10,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | | * -------------------------------------------------------------------------------' * | caps | a | s | d | f | g | h | j | k | l | ; | ' | enter |PgUp| -* -------------------------------------------------------------------------------- +* -------------------------------------------------------------------------------- * |Lsft | z | x | c | v | b | n | m | , | . | / | Rsft| Up| PgDn| -* --------------------------------------------------------------------------------- +* --------------------------------------------------------------------------------- * |Lctl |Lgui |Lalt | Space |Ralt | FN | Rctl |Left|Down|Rght| -* --------------------------------------------------------------------------------- +* --------------------------------------------------------------------------------- */ -[0] = KEYMAP( \ - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, KC_MUTE,\ - KC_GRAVE, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQL, KC_BSPC, KC_DEL,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, RSFT(KC_1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT -) - + [0] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, KC_MUTE, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, RSFT(KC_1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ) }; -const uint16_t PROGMEM fn_actions[] = { - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - void matrix_init_user(void) { diff --git a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/readme.md b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/readme.md new file mode 100644 index 000000000..91575f7cd --- /dev/null +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Microsoft Sculpt Mobile diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/rules.mk b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk index 3955a3ff4..3955a3ff4 100644 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/default/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/config.h b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/config.h index 5c04f647c..9d6be063e 100644 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/config.h +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/config.h @@ -1,23 +1,20 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../../MS_sculpt_mobile/config.h" +#pragma once #define USE_BABLPASTE -// Expect to get errors if you comment a feature out and leave it in your keymap. +// Expect to get errors if you comment a feature out and leave it in your keymap. #ifdef USE_BABLPASTE //define BabblePaste maps -// Windows. +// Windows. #define MAC_MODE 0 #define MS_MODE 1 //aka gnome+KDE -//#define LINUX_MODE 2 +//#define LINUX_MODE 2 //#define EMACS_MODE 3 #define VI_MODE 3 // Readline and tmux -#define READMUX_MODE 2 +#define READMUX_MODE 2 //#define WORDSTAR_MODE 5 #endif @@ -29,4 +26,3 @@ //#define BABL_NOBROWSER // place overrides here -#endif diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/keymap.c b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/keymap.c index c9b16e75e..c5ed18797 100644 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/keymap.c +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/keymap.c @@ -1,11 +1,5 @@ -#include "../../../MS_sculpt_mobile/babblePaste.h" -#include "../../MS_sculpt_mobile.h" -#include "action_layer.h" -#include "action_util.h" - -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif +#include "babblePaste.h" +#include QMK_KEYBOARD_H #define _QWR 0 #define _CDH 2 @@ -59,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * --------------------------------------------------------------------------------- */ -[_QWR] = KEYMAP( \ +[_QWR] = LAYOUT( \ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, CDH,\ KC_ESC, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQL, KC_BSPC, KC_DEL,\ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\ @@ -68,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_FN1, KC_RGUI,TT_SYM,KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT ), -[_CDH] = KEYMAP (\ +[_CDH] = LAYOUT(\ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, QWR, \ KC_ESC, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, ____, ____, ____,\ @@ -95,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * --------------------------------------------------------------------------------- */ -[_SYM] = KEYMAP (\ +[_SYM] = LAYOUT(\ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ M(VIBRK), KC_CIRC, KC_LCBR, KC_RCBR,KC_AT, KC_PERC, ____, KC_LBRC,KC_LPRN,KC_RPRN,KC_UNDS, ____, ____, ____,\ @@ -118,7 +112,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * --------------------------------------------------------------------------------- */ -[_MOV] = KEYMAP (\ +[_MOV] = LAYOUT(\ ____, B_MAC,B_WIN,B_READ, B_VI, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ ____, ____, B_PAPP, B_NAPP, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ ____, B_UNDO, ____, B_BFND, ____, B_PTAB, B_DSOL, B_DLW, B_UP, B_DRW, B_DEOL, ____, ____, ____, \ @@ -127,7 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ____, ____, ____, ____, ____, ____, ____, ____, ____, ____ ), -[_TRAN] = KEYMAP (\ +[_TRAN] = LAYOUT(\ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ diff --git a/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/readme.md b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/readme.md new file mode 100644 index 000000000..3cb1380d1 --- /dev/null +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/readme.md @@ -0,0 +1 @@ +# A more programmer oriented keymap for Microsoft Sculpt Mobile diff --git a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/rules.mk b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/rules.mk index ddfea8255..ddfea8255 100644 --- a/keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/milestogo/rules.mk diff --git a/keyboards/handwired/ms_sculpt_mobile/ms_sculpt_mobile.c b/keyboards/handwired/ms_sculpt_mobile/ms_sculpt_mobile.c new file mode 100644 index 000000000..53773e5d8 --- /dev/null +++ b/keyboards/handwired/ms_sculpt_mobile/ms_sculpt_mobile.c @@ -0,0 +1 @@ +#include "ms_sculpt_mobile.h" diff --git a/keyboards/handwired/MS_sculpt_mobile/MS_sculpt_mobile.h b/keyboards/handwired/ms_sculpt_mobile/ms_sculpt_mobile.h index 1583dea6e..cfa07c92e 100644 --- a/keyboards/handwired/MS_sculpt_mobile/MS_sculpt_mobile.h +++ b/keyboards/handwired/ms_sculpt_mobile/ms_sculpt_mobile.h @@ -4,7 +4,7 @@ #include "quantum.h" -#define KEYMAP( \ +#define LAYOUT( \ k7Q, k6O, k6P, k6Q, k5O, k5P, k5Q, k7A, k7B, k7C, k7D, k7E, k7F, k1O, k1K, k1L, \ k5A, k5K, k5L, k5M, k5N, k5H, k5I, k2A, k2B, k2C, k2D, k5B, k5C, k5J, k2E, \ k6R, k6D, k6E, k6F, k7I, k7J, k4A, k4B, k4C, k4D, k3A, k3B, k3C, k3D, \ @@ -24,7 +24,7 @@ } -#define MATRIX_TESTING_KEYMAP( \ +#define MATRIX_TESTING_LAYOUT( \ k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0I, k0, k0J, k0K, k0L, k0M, k0N, k0O, k0P, k0Q,\ k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, k1, k1J, k1K, k1L, k1M, k1N, k1O, k1P, k1Q,\ k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, k2, k2J, k2K, k2L, k2M, k2N, k2O, k2P, k2Q,\ diff --git a/keyboards/handwired/ms_sculpt_mobile/readme.md b/keyboards/handwired/ms_sculpt_mobile/readme.md new file mode 100644 index 000000000..98fd1f8d1 --- /dev/null +++ b/keyboards/handwired/ms_sculpt_mobile/readme.md @@ -0,0 +1,55 @@ +# Microsoft Sculpt Mobile + +This is a way to take a Microsoft ergonomic bluetooth keyboard, and make it +into a hard-wired keyboard running QMK. + +The keyboard is known under several different names: +Mobile Bluetooth 5000, Mobile 6000, Sculpt mobile, and Asus rebranded. + +I had a stack of them, since they're cheap on ebay, travel well, and are just ergo enough. + +The ribbon cable is 1mm pitch, which is hard to hand solder. I bought a cheap set of +"pitch adapter" boards https://www.amazon.com/Double-Sided-0-4mm-1-0-Adapter-60mmx38mm/dp/B00OK42118 + +Cut the original ribbon cable sockets off the bluetooth board using a razor, they're hard to desolder. +They're also allow the cable to be inserted on top or bottom. + +If I was going to do it again, I'd make the MCU connection come out the top of the keyboard +and avoid the wires dangling out the bottom. + +As I was debugging the matrix, I started to get random failures. In desparation I tried a second MCU, +but had the same problems. It turns out that the ribbon cable connections can get worn. Shave a +half millimeter off the end of the ribbon cable & the errors go away. + +My method for discovering the matrix was to set up a LAYOUT macro that included all pins. +See MATRIX_TESTING_LAYOUT if you need it. Then set up a keymap that has all printable symbols +in the first 4 rows. test each key & record output. Then switch the printable symbols to the +bottom 4 rows & repeat. This was enough to show the matrix. + + +The full original keymap for the Sculpt is + +| | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | +|:-:|:--:|:--:|:--:|:---:|:---:|:---:|:----:|:----:|:----:|:-----:|:----:|:------:|:----:|:-----:|:----:|:------:|:----:|:---:| +| 0 | b | n | m | , | . | / | | | | Caps | | | | | | | | Fn | +| 1 | g | h | " | | | | | | | | Vol+ | Mute | RCtl | | Vol- | PgDn | LCtl | | +| 2 | 7 | 8 | 9 | 0 | Del | | PgUp | | | | | RShift | | | | LShift | | | +| 3 | p | [ | ] | \ | | | | | | | RAlt | | | | LAlt | | | | +| 4 | y | u | i | o | | | | | | | | | | LGUI | | | | | +| 5 | ~ | - | += | j | k | l | ; | 5 | 6 | Bksp | 1 | 2 | 3 | 4 | F4 | F5 | F6 | | +| 6 | a | s | d | q | w | e | Up | Left | Down | Right | | | | Space | F1 | F2 | F3 | Tab | +| 7 | F7 | F8 | F9 | F10 | F11 | F12 | | f | r | t | z | x | c | | v | Enter | Esc | | + +This works with 18 cols + 8 rows on a Teensy++, or ARM-based Teensy. + +The Astar mini has all pins exposed , so you can do 18x8 +If you want a speaker, LEDs, etc., you'll need to free up a pin. I recommend joining columns +R and L to the same pin. + +Building - add ASTAR=1 to the compile line or leave out for teensy2++ + +Make example for this keyboard (after setting up your build environment): + + make handwired/ms_sculpt_mobile:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/MS_sculpt_mobile/rules.mk b/keyboards/handwired/ms_sculpt_mobile/rules.mk index 680c057d3..680c057d3 100644 --- a/keyboards/handwired/MS_sculpt_mobile/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/rules.mk |