diff options
| -rw-r--r-- | common.mk | 23 | ||||
| -rw-r--r-- | keyboard/hhkb/keymap.c | 2 | ||||
| -rw-r--r-- | keyboard/lufa/config.h | 76 | ||||
| -rw-r--r-- | keyboard/lufa/keymap.c | 195 | ||||
| -rw-r--r-- | keyboard/lufa/led.c | 24 | ||||
| -rw-r--r-- | keyboard/lufa/matrix.c | 271 | ||||
| -rw-r--r-- | keyboard/macway/Makefile | 53 | ||||
| -rw-r--r-- | keyboard/macway/Makefile.lufa (renamed from keyboard/lufa/Makefile) | 107 | ||||
| -rw-r--r-- | keyboard/macway/Makefile.pjrc | 96 | ||||
| -rw-r--r-- | keyboard/macway/config.h | 6 | ||||
| -rw-r--r-- | keyboard/macway/keymap.c | 8 | ||||
| -rw-r--r-- | protocol/lufa.mk | 34 | ||||
| -rw-r--r-- | protocol/lufa/descriptor.c (renamed from keyboard/lufa/descriptor.c) | 0 | ||||
| -rw-r--r-- | protocol/lufa/descriptor.h (renamed from keyboard/lufa/descriptor.h) | 0 | ||||
| -rw-r--r-- | protocol/lufa/lufa.c (renamed from keyboard/lufa/lufa.c) | 0 | ||||
| -rw-r--r-- | protocol/lufa/lufa.h (renamed from keyboard/lufa/lufa.h) | 0 | ||||
| -rw-r--r-- | protocol/pjrc.mk | 24 | ||||
| -rw-r--r-- | rules.mk | 27 |
18 files changed, 214 insertions, 732 deletions
@@ -1,22 +1,23 @@ -SRC += host.c \ - keyboard.c \ - command.c \ - layer.c \ - timer.c \ - print.c \ - bootloader.c \ - util.c +COMMON_DIR = common +SRC += $(COMMON_DIR)/host.c \ + $(COMMON_DIR)/keyboard.c \ + $(COMMON_DIR)/command.c \ + $(COMMON_DIR)/layer.c \ + $(COMMON_DIR)/timer.c \ + $(COMMON_DIR)/print.c \ + $(COMMON_DIR)/bootloader.c \ + $(COMMON_DIR)/util.c # Option modules ifdef MOUSEKEY_ENABLE - SRC += mousekey.c + SRC += $(COMMON_DIR)/mousekey.c OPT_DEFS += -DMOUSEKEY_ENABLE endif ifdef PS2_MOUSE_ENABLE - SRC += ps2.c \ - ps2_mouse.c + SRC += $(COMMON_DIR)/ps2.c \ + $(COMMON_DIR)/ps2_mouse.c OPT_DEFS += -DPS2_MOUSE_ENABLE endif diff --git a/keyboard/hhkb/keymap.c b/keyboard/hhkb/keymap.c index 85a7c31b7..88a6737ba 100644 --- a/keyboard/hhkb/keymap.c +++ b/keyboard/hhkb/keymap.c @@ -110,7 +110,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Gui |Alt |Space |Alt |xxx| * `--------------------------------------------' */ - KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ + KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, BSPC, \ LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ diff --git a/keyboard/lufa/config.h b/keyboard/lufa/config.h deleted file mode 100644 index 5368b38d2..000000000 --- a/keyboard/lufa/config.h +++ /dev/null @@ -1,76 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -/* controller configuration */ -#include "controller_teensy.h" - - -/* USB Device descriptor */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xBEE6 -#define DEVICE_VER 0x0202 -#define MANUFACTURER t.m.k. -#define PRODUCT Macway mod(LUFA) - - -/* message strings */ -#define DESCRIPTION t.m.k. keyboard firmware for Macway mod(LUFA) - - -/* matrix size */ -#define MATRIX_ROWS 9 -#define MATRIX_COLS 8 -/* define if matrix has ghost */ -#define MATRIX_HAS_GHOST -/* Set 0 if need no debouncing */ -#define DEBOUNCE 5 - - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \ - keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \ -) - - -/* layer switching */ -#define LAYER_SWITCH_DELAY 100 -#define LAYER_SEND_FN_TERM 300 - - -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 192 -#endif - - -/* PS/2 mouse */ -#ifdef PS2_MOUSE_ENABLE -# define PS2_CLOCK_PORT PORTF -# define PS2_CLOCK_PIN PINF -# define PS2_CLOCK_DDR DDRF -# define PS2_CLOCK_BIT 0 -# define PS2_DATA_PORT PORTF -# define PS2_DATA_PIN PINF -# define PS2_DATA_DDR DDRF -# define PS2_DATA_BIT 1 -#endif - -#endif diff --git a/keyboard/lufa/keymap.c b/keyboard/lufa/keymap.c deleted file mode 100644 index aa563651a..000000000 --- a/keyboard/lufa/keymap.c +++ /dev/null @@ -1,195 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * Keymap for Macway mod - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "usb_keycodes.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "keymap.h" - - -// Convert physical keyboard layout to matrix array. -// This is a macro to define keymap easily in keyboard layout form. -#define KEYMAP( \ - K11, K10, K20, K30, K40, K41, K51, K50, K60, K70, K80, K81, K61, K02, \ - K12, K13, K23, K33, K43, K42, K52, K53, K63, K73, K83, K82, K62, K01, \ - K15, K14, K24, K34, K44, K45, K55, K54, K64, K74, K84, K85, K06, \ - K67, K16, K26, K36, K46, K47, K57, K56, K66, K76, K87, K32, K35, \ - K75, K22, K00, K07, K21, K04, K37, K27, K17 \ -) { \ - { KB_##K00, KB_##K01, KB_##K02, KB_NO, KB_##K04, KB_NO, KB_##K06, KB_##K07 }, \ - { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \ - { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_NO, KB_##K26, KB_##K27 }, \ - { KB_##K30, KB_NO, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \ - { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \ - { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \ - { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_NO, KB_##K66, KB_##K67 }, \ - { KB_##K70, KB_NO, KB_NO, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_NO }, \ - { KB_##K80, KB_##K81, KB_##K82, KB_##K83, KB_##K84, KB_##K85, KB_NO, KB_##K87 } \ -} - -#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) - - -// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. -static const uint8_t PROGMEM fn_layer[] = { - 0, // Fn0 - 1, // Fn1 - 2, // Fn2 - 3, // Fn3 - 4, // Fn4 - 0, // Fn5 - 3, // Fn6 - 3 // Fn7 -}; - -// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. -// See layer.c for details. -static const uint8_t PROGMEM fn_keycode[] = { - KB_NO, // Fn0 - KB_NO, // Fn1 - KB_SLSH, // Fn2 - KB_SCLN, // Fn3 - KB_SPC, // Fn4 - KB_NO, // Fn5 - KB_NO, // Fn6 - KB_NO // Fn7 -}; - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | - * |-----------------------------------------------------' | - * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Return | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn1| - * |-----------------------------------------------------------| - * |Fn7|Gui |Alt |Fn4 |Alt |Gui|Fn6|Fn6|Ctr| - * `-----------------------------------------------------------' - */ - KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ - LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \ - LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ - FN7, LGUI,LALT,FN4, RALT,BSLS,FN6, FN6, RCTL), - - - /* Layer 1: HHKB mode (HHKB Fn) - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | - * |-----------------------------------------------------------| - * |Caps | | | | | | | |Psc|Slk|Pus|Up | | | - * |-----------------------------------------------------' | - * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | - * |-----------------------------------------------------------| - * |Shift | | | | | | +| -|End|PgD|Dow|Shift |xxx| - * |-----------------------------------------------------------| - * | |Gui |Alt | |Alt |Gui| | |Ctr| - * `-----------------------------------------------------------' - */ - KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ - CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \ - LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ - LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ - NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL), - - - /* Layer 2: Vi mode (Quote/Rmeta) - * ,-----------------------------------------------------------. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` | - * |-----------------------------------------------------------| - * | \ |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End| | | | | - * |-----------------------------------------------------' | - * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | | \ | - * |-----------------------------------------------------------| - * |Shift | | | | | |Hom|PgD|PgU|End|xxx|Shift | | - * |-----------------------------------------------------------| - * | |Gui |Alt |Space |Alt |Gui|Fn6|Fn6|Ctr| - * `-----------------------------------------------------------' - */ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \ - BSLS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, NO, \ - LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, BSLS, \ - LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,NO, \ - NO, LGUI,LALT,SPC, RALT,RGUI,FN6, FN6, RCTL), - - - /* Layer 3: Mouse mode (Semicolon) - * ,-----------------------------------------------------------. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` | - * |-----------------------------------------------------------| - * | \ |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR| | | | | - * |-----------------------------------------------------' | - * |Contro| |McL|McD|McR| |McL|McD|McU|McR|xxx| | \ | - * |-----------------------------------------------------------| - * |Shift | | |Mb1|Mb2|Mb3|Mb2|Mb1| | | |Shift | | - * |-----------------------------------------------------------| - * |xxx|Gui |Alt |Mb1 |Alt | | | | | - * `-----------------------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \ - BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ - LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ - LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ - FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO), - - - /* Layer 4: Matias half keyboard style (Space) - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | - * |-----------------------------------------------------------| - * |Backs| P| O| I| U| Y| T| R| E| W| Q|Tab|Tab| | - * |-----------------------------------------------------' | - * |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control | - * |-----------------------------------------------------------| - * |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | | - * |-----------------------------------------------------------| - * | |Gui |Alt |xxxxxxxxxxxxxxxxxxxxxx|Alt |Gui| | |Ctr| - * `-----------------------------------------------------------' - */ - KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, ESC, \ - BSPC,P, O, I, U, Y, T, R, E, W, Q, TAB, TAB, TAB, \ - LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \ - LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \ - NO, LGUI,LALT,FN4, RALT,RGUI,NO, NO, RCTL), -}; - - -uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) -{ - return KEYCODE(layer, row, col); -} - -uint8_t keymap_fn_layer(uint8_t fn_bits) -{ - return pgm_read_byte(&fn_layer[biton(fn_bits)]); -} - -uint8_t keymap_fn_keycode(uint8_t fn_bits) -{ - return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); -} diff --git a/keyboard/lufa/led.c b/keyboard/lufa/led.c deleted file mode 100644 index f76545f0b..000000000 --- a/keyboard/lufa/led.c +++ /dev/null @@ -1,24 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "stdint.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ -} diff --git a/keyboard/lufa/matrix.c b/keyboard/lufa/matrix.c deleted file mode 100644 index 394c3d970..000000000 --- a/keyboard/lufa/matrix.c +++ /dev/null @@ -1,271 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - - -#if (MATRIX_COLS > 16) -# error "MATRIX_COLS must not exceed 16" -#endif -#if (MATRIX_ROWS > 255) -# error "MATRIX_ROWS must not exceed 255" -#endif - - -#ifndef DEBOUNCE -# define DEBOUNCE 0 -#endif -static uint8_t debouncing = DEBOUNCE; - -// matrix state buffer(1:on, 0:off) -#if (MATRIX_COLS <= 8) -static uint8_t *matrix; -static uint8_t *matrix_prev; -static uint8_t _matrix0[MATRIX_ROWS]; -static uint8_t _matrix1[MATRIX_ROWS]; -#else -static uint16_t *matrix; -static uint16_t *matrix_prev; -static uint16_t _matrix0[MATRIX_ROWS]; -static uint16_t _matrix1[MATRIX_ROWS]; -#endif - -#ifdef MATRIX_HAS_GHOST -static bool matrix_has_ghost_in_row(uint8_t row); -#endif -static uint8_t read_col(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - // Input with pull-up(DDR:0, PORT:1) - DDRB = 0x00; - PORTB = 0xFF; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; - for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00; - matrix = _matrix0; - matrix_prev = _matrix1; -} - -uint8_t matrix_scan(void) -{ - if (!debouncing) { - uint8_t *tmp = matrix_prev; - matrix_prev = matrix; - matrix = tmp; - } - - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - unselect_rows(); - select_row(i); - _delay_us(30); // without this wait read unstable value. - if (matrix[i] != (uint8_t)~read_col()) { - matrix[i] = (uint8_t)~read_col(); - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); print("\n"); - } - debouncing = DEBOUNCE; - } - } - unselect_rows(); - - if (debouncing) { - debouncing--; - } - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) { - return true; - } - } - return false; -} - -inline -bool matrix_has_ghost(void) -{ -#ifdef MATRIX_HAS_GHOST - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix_has_ghost_in_row(i)) - return true; - } -#endif - return false; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & (1<<col)); -} - -inline -#if (MATRIX_COLS <= 8) -uint8_t matrix_get_row(uint8_t row) -#else -uint16_t matrix_get_row(uint8_t row) -#endif -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 01234567\n"); - for (uint8_t row = 0; row < matrix_rows(); row++) { - phex(row); print(": "); -#if (MATRIX_COLS <= 8) - pbin_reverse(matrix_get_row(row)); -#else - pbin_reverse16(matrix_get_row(row)); -#endif -#ifdef MATRIX_HAS_GHOST - if (matrix_has_ghost_in_row(row)) { - print(" <ghost"); - } -#endif - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { -#if (MATRIX_COLS <= 8) - count += bitpop(matrix[i]); -#else - count += bitpop16(matrix[i]); -#endif - } - return count; -} - -#ifdef MATRIX_HAS_GHOST -inline -static bool matrix_has_ghost_in_row(uint8_t row) -{ - // no ghost exists in case less than 2 keys on - if (((matrix[row] - 1) & matrix[row]) == 0) - return false; - - // ghost exists in case same state as other row - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - if (i != row && (matrix[i] & matrix[row]) == matrix[row]) - return true; - } - return false; -} -#endif - -inline -static uint8_t read_col(void) -{ - return PINB; -} - -inline -static void unselect_rows(void) -{ - // Hi-Z(DDR:0, PORT:0) to unselect - DDRC &= ~0b01000000; // PC: 6 - PORTC &= ~0b11000000; - DDRD &= ~0b11100111; // PD: 7,6,5,2,1,0 - PORTD &= ~0b11000111; - DDRF &= ~0b11000000; // PF: 7,6 - PORTF &= ~0b11000000; -} - -inline -static void select_row(uint8_t row) -{ - // Output low(DDR:1, PORT:0) to select - // row: 0 1 2 3 4 5 6 7 8 - // pin: PD0, PD5, PD7, PF6, PD6, PD1, PD2, PC6, PF7 - switch (row) { - case 0: - DDRD |= (1<<0); - PORTD &= ~(1<<0); - break; - case 1: - DDRD |= (1<<5); - PORTD &= ~(1<<5); - break; - case 2: - DDRD |= (1<<7); - PORTD &= ~(1<<7); - break; - case 3: - DDRF |= (1<<6); - PORTF &= ~(1<<6); - break; - case 4: - DDRD |= (1<<6); - PORTD &= ~(1<<6); - break; - case 5: - DDRD |= (1<<1); - PORTD &= ~(1<<1); - break; - case 6: - DDRD |= (1<<2); - PORTD &= ~(1<<2); - break; - case 7: - DDRC |= (1<<6); - PORTC &= ~(1<<6); - break; - case 8: - DDRF |= (1<<7); - PORTF &= ~(1<<7); - break; - } -} diff --git a/keyboard/macway/Makefile b/keyboard/macway/Makefile deleted file mode 100644 index afee38b12..000000000 --- a/keyboard/macway/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# Target file name (without extension). -TARGET = macway - -# Directory common source filess exist -TOP_DIR = ../.. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = main.c \ - keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Build Options -# comment out to disable the options. -# -MOUSEKEY_ENABLE = yes # Mouse keys -#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support -EXTRAKEY_ENABLE = yes # Audio control and System control -#NKRO_ENABLE = yes # USB Nkey Rollover - - - -#---------------- Programming Options -------------------------- -PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex - - - -include $(TOP_DIR)/protocol/pjrc.mk -include $(TOP_DIR)/protocol.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk diff --git a/keyboard/lufa/Makefile b/keyboard/macway/Makefile.lufa index 030f4061d..a3395a2ab 100644 --- a/keyboard/lufa/Makefile +++ b/keyboard/macway/Makefile.lufa @@ -1,23 +1,3 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# >> Modified for use with the LUFA project. << -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# Dean Camera -# Opendous Inc. -# Denver Gingerich -# #---------------------------------------------------------------------------- # On command line: # @@ -29,8 +9,11 @@ # # make extcoff = Convert ELF to AVR Extended COFF. # -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). # # make dfu = Download the hex file to the device, using dfu-programmer (must # have dfu-programmer installed). @@ -44,10 +27,7 @@ # make flip-ee = Download the eeprom file to the device, using Atmel FLIP # (must have Atmel FLIP installed). # -# make doxygen = Generate DoxyGen documentation for the project (must have -# DoxyGen installed) -# -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -58,26 +38,28 @@ # To rebuild project do "make clean" then "make all". #---------------------------------------------------------------------------- +# Target file name (without extension). +TARGET = macway_lufa + # Directory common source filess exist TOP_DIR = ../.. # Directory keyboard dependent files exist TARGET_DIR = . -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 +# List C source files here. (C dependencies are automatically generated.) +SRC += keymap.c \ + matrix.c \ + led.c \ + protocol/pjrc/bootloader_teensy.c -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - +CONFIG_H = config.h -# Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called -# "Board" inside the application directory. -BOARD = USBKEY +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 # Processor frequency. # This will define a symbol, F_CPU, in all source code files equal to the @@ -93,6 +75,12 @@ BOARD = USBKEY F_CPU = 16000000 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + # Input clock frequency. # This will define a symbol, F_USB, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may @@ -107,31 +95,6 @@ F_CPU = 16000000 F_USB = $(F_CPU) -# Target file name (without extension). -TARGET = lufa - - -# Path to the LUFA library -LUFA_PATH = ../../protocol - -# Create the LUFA source path variables by including the LUFA root makefile -include $(LUFA_PATH)/LUFA/makefile - - - -# List C source files here. (C dependencies are automatically generated.) -LUFA_SRC = $(TARGET).c \ - descriptor.c \ - $(LUFA_SRC_USB) \ - $(LUFA_SRC_USBCLASS) - -SRC = $(subst $(LUFA_PATH)/LUFA/,,$(LUFA_SRC)) -SRC += keymap.c \ - matrix.c \ - led.c \ - pjrc/bootloader_teensy.c -CONFIG_H = config.h - # Build Options # comment out to disable the options. @@ -142,28 +105,10 @@ EXTRAKEY_ENABLE = yes # Audio control and System control #NKRO_ENABLE = yes # USB Nkey Rollover -# LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -OPT_DEFS = -DF_CPU=$(F_CPU)UL -OPT_DEFS += -DF_USB=$(F_USB)UL -OPT_DEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) -OPT_DEFS += $(LUFA_OPTS) - - - # Search Path VPATH += $(TARGET_DIR) -VPATH += $(LUFA_PATH)/LUFA +VPATH += $(TOP_DIR) - -include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/protocol/lufa.mk include $(TOP_DIR)/common.mk include $(TOP_DIR)/rules.mk - -test: - echo $(SRC) diff --git a/keyboard/macway/Makefile.pjrc b/keyboard/macway/Makefile.pjrc new file mode 100644 index 000000000..d2fb8ff2f --- /dev/null +++ b/keyboard/macway/Makefile.pjrc @@ -0,0 +1,96 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = macway_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = protocol/pjrc/main.c \ + keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# comment out to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +EXTRAKEY_ENABLE = yes # Audio control and System control +#NKRO_ENABLE = yes # USB Nkey Rollover + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/macway/config.h b/keyboard/macway/config.h index b68ea20dc..5503c77e3 100644 --- a/keyboard/macway/config.h +++ b/keyboard/macway/config.h @@ -21,10 +21,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* controller configuration */ #include "controller_teensy.h" + +/* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0xBEE0 +#define DEVICE_VER 0x0202 #define MANUFACTURER t.m.k. #define PRODUCT Macway mod + + +/* message strings */ #define DESCRIPTION t.m.k. keyboard firmware for Macway mod diff --git a/keyboard/macway/keymap.c b/keyboard/macway/keymap.c index 89634e2f4..5ecea2569 100644 --- a/keyboard/macway/keymap.c +++ b/keyboard/macway/keymap.c @@ -59,7 +59,7 @@ static const uint8_t PROGMEM fn_layer[] = { 3, // Fn3 4, // Fn4 0, // Fn5 - 2, // Fn6 + 3, // Fn6 3 // Fn7 }; @@ -94,7 +94,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,ENT, \ LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \ - FN7, LGUI,LALT,FN4, RALT,BSLS,GRV, FN6, RCTL), + FN7, LGUI,LALT,FN4, RALT,GRV, FN6, FN6, RCTL), /* Layer 1: HHKB mode (HHKB Fn) @@ -110,7 +110,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | |Gui |Alt | |Alt |Gui| | |Ctr| * `-----------------------------------------------------------' */ - KEYMAP(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ + KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \ LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ @@ -155,7 +155,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ - FN7, LGUI,LALT,BTN1,RALT,NO, NO, NO, NO), + FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO), /* Layer 4: Matias half keyboard style (Space) diff --git a/protocol/lufa.mk b/protocol/lufa.mk new file mode 100644 index 000000000..ad6cab6d3 --- /dev/null +++ b/protocol/lufa.mk @@ -0,0 +1,34 @@ +LUFA_DIR = protocol/lufa + +# Path to the LUFA library +LUFA_PATH = $(TOP_DIR)/protocol/lufa/LUFA-120219 + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + +LUFA_SRC = $(LUFA_DIR)/lufa.c \ + $(LUFA_DIR)/descriptor.c \ + $(LUFA_SRC_USB) +SRC += $(subst $(LUFA_PATH)/,,$(LUFA_SRC)) + +# Search Path +VPATH += $(LUFA_PATH) + +# Option modules +#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) +#endif + +#ifdef EXTRAKEY_ENABLE +#endif + +# LUFA library compile-time options and predefined tokens +LUFA_OPTS = -D USB_DEVICE_ONLY +LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 +LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 +LUFA_OPTS += -D USE_FLASH_DESCRIPTORS +LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" + +OPT_DEFS += -DF_USB=$(F_USB)UL +OPT_DEFS += -DARCH=ARCH_$(ARCH) +OPT_DEFS += $(LUFA_OPTS) +OPT_DEFS += -DHOST_LUFA diff --git a/keyboard/lufa/descriptor.c b/protocol/lufa/descriptor.c index e9925cca2..e9925cca2 100644 --- a/keyboard/lufa/descriptor.c +++ b/protocol/lufa/descriptor.c diff --git a/keyboard/lufa/descriptor.h b/protocol/lufa/descriptor.h index 6b1b4d484..6b1b4d484 100644 --- a/keyboard/lufa/descriptor.h +++ b/protocol/lufa/descriptor.h diff --git a/keyboard/lufa/lufa.c b/protocol/lufa/lufa.c index 09da96b2e..09da96b2e 100644 --- a/keyboard/lufa/lufa.c +++ b/protocol/lufa/lufa.c diff --git a/keyboard/lufa/lufa.h b/protocol/lufa/lufa.h index efb8c3837..efb8c3837 100644 --- a/keyboard/lufa/lufa.h +++ b/protocol/lufa/lufa.h diff --git a/protocol/pjrc.mk b/protocol/pjrc.mk index 1ee45e9ec..1ceee0ad9 100644 --- a/protocol/pjrc.mk +++ b/protocol/pjrc.mk @@ -1,21 +1,21 @@ -OPT_DEFS += -DHOST_PJRC - -SRC += pjrc.c \ - usb_keyboard.c \ - usb_debug.c \ - usb.c \ - bootloader_teensy.c +PJRC_DIR = protocol/pjrc +OPT_DEFS += -DHOST_PJRC -# Search Path -VPATH += $(TOP_DIR)/protocol/pjrc - +SRC += $(PJRC_DIR)/pjrc.c \ + $(PJRC_DIR)/usb_keyboard.c \ + $(PJRC_DIR)/usb_debug.c \ + $(PJRC_DIR)/usb.c \ + $(PJRC_DIR)/bootloader_teensy.c # Option modules ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) - SRC += usb_mouse.c + SRC += $(PJRC_DIR)/usb_mouse.c endif ifdef EXTRAKEY_ENABLE - SRC += usb_extra.c + SRC += $(PJRC_DIR)/usb_extra.c endif + +# Search Path +VPATH += $(TOP_DIR)/$(PJRC_DIR) @@ -25,8 +25,23 @@ # # make extcoff = Convert ELF to AVR Extended COFF. # -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). # # make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. @@ -567,6 +582,10 @@ clean_list : $(REMOVE) -r .dep $(REMOVE) -r $(OBJDIR) +show_path: + @echo VPATH=$(VPATH) + @echo SRC=$(SRC) + # Create object files directory $(shell mkdir $(OBJDIR) 2>/dev/null) @@ -579,5 +598,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) # Listing of phony targets. .PHONY : all begin finish end sizebefore sizeafter gccversion \ build elf hex eep lss sym coff extcoff \ -clean clean_list program debug gdb-config - +clean clean_list debug gdb-config show_path \ +program teensy dfu flip dfu-ee flip-ee |