diff options
29 files changed, 589 insertions, 39 deletions
diff --git a/Dockerfile b/Dockerfile new file mode 100644 index 000000000..96ace4ec6 --- /dev/null +++ b/Dockerfile @@ -0,0 +1,28 @@ +FROM debian:jessie +MAINTAINER Erik Dasque <erik@frenchguys.com> + +RUN apt-get update +RUN apt-get install --no-install-recommends -y build-essential \ + gcc \ + unzip \ + wget \ + zip \ + gcc-avr \ + binutils-avr \ + avr-libc \ + dfu-programmer \ + dfu-util \ + gcc-arm-none-eabi \ + binutils-arm-none-eabi \ + libnewlib-arm-none-eabi \ + git + +RUN apt-get clean +RUN rm -rf /var/lib/apt/lists/* + +ENV keyboard=ergodox_ez +ENV keymap=default + +VOLUME /qmk +WORKDIR /qmk +CMD make clean ; make keyboard=${keyboard} keymap=${keymap}
\ No newline at end of file diff --git a/keyboards/alps64/readme.md b/keyboards/alps64/readme.md new file mode 100644 index 000000000..1798b193a --- /dev/null +++ b/keyboards/alps64/readme.md @@ -0,0 +1,4 @@ +Alps64 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md new file mode 100644 index 000000000..aa301f020 --- /dev/null +++ b/keyboards/clueboard/readme.md @@ -0,0 +1,4 @@ +Clueboard keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/cluepad/readme.md b/keyboards/cluepad/readme.md new file mode 100644 index 000000000..8450340f2 --- /dev/null +++ b/keyboards/cluepad/readme.md @@ -0,0 +1,4 @@ +Cluepad number pad firmware +====================== + +TODO: to be updated. diff --git a/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md b/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md index 4188d2b50..16cebd091 100644 --- a/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md +++ b/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md @@ -10,7 +10,7 @@ There are four layers: Looking for IJKL arrows? [Here we go](../romanzolotarev-norman-plover-osx/). -[](rttp://www.keyboard-layout-editor.com/#/gists/56ffedceb0668dda47c993e7271563e0) +[](http://www.keyboard-layout-editor.com/#/gists/56ffedceb0668dda47c993e7271563e0) ## Switching diff --git a/keyboards/handwired/CMD60/CMD60.c b/keyboards/handwired/CMD60/CMD60.c new file mode 100644 index 000000000..799848e34 --- /dev/null +++ b/keyboards/handwired/CMD60/CMD60.c @@ -0,0 +1,8 @@ +#include "CMD60.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/CMD60/CMD60.h b/keyboards/handwired/CMD60/CMD60.h new file mode 100644 index 000000000..f90871fc7 --- /dev/null +++ b/keyboards/handwired/CMD60/CMD60.h @@ -0,0 +1,20 @@ +#ifndef CMD60_H +#define CMD60_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ + ) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO,K4A, K4B, K4C, K4D } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/CMD60/Makefile b/keyboards/handwired/CMD60/Makefile new file mode 100644 index 000000000..711759917 --- /dev/null +++ b/keyboards/handwired/CMD60/Makefile @@ -0,0 +1,73 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + + diff --git a/keyboards/handwired/CMD60/README.md b/keyboards/handwired/CMD60/README.md new file mode 100644 index 000000000..83e371543 --- /dev/null +++ b/keyboards/handwired/CMD60/README.md @@ -0,0 +1,35 @@ +CMD60 keyboard firmware +====================== + +##CMD60 + +This layout has been designed to optimize use of the left-hand, and it focussed specifically on programmers who work +with text editors like SublimeText and Atom. It utilizes the power of Space_fn, and features a caps lock swap for Fn2 +and enter key on tap. These features allow you to keep your right hand on the mouse more and should enable you to +achieve a higher level of productivity if you take the time to learn its function layers. + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/handwired/CMD60 folder. +Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use +the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +``` +$ make keymap=[default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/handwired/CMD60/config.h b/keyboards/handwired/CMD60/config.h new file mode 100644 index 000000000..27eb400b8 --- /dev/null +++ b/keyboards/handwired/CMD60/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER cmd +#define PRODUCT CMD60 +#define DESCRIPTION Advanced Programming Keeb Layout + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, D2, D3, C6, D7, B4, B5, B6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/CMD60/keymaps/default/keymap.c b/keyboards/handwired/CMD60/keymaps/default/keymap.c new file mode 100644 index 000000000..9f9cbcd66 --- /dev/null +++ b/keyboards/handwired/CMD60/keymaps/default/keymap.c @@ -0,0 +1,66 @@ +#include "CMD60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* CMD60 - QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(3, KC_ENT), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, LT(2, KC_SPC), MO(3), MO(4), MO(5), TG(1) \ + ), + [1] = KEYMAP( /* CMD60 - GameMode */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_RSFT, \ + KC_TRNS, KC_NO, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [2] = KEYMAP( /* CMD60 - Arrows */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_BSPC, KC_UP, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_UP, KC_DEL, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [3] = KEYMAP( /* CMD60 - Functions */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_AUDIO_MUTE, KC_BSPC, KC_PGUP, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_PAUSE, KC_SLCK, KC_PSCREEN, \ + KC_TRNS, KC_HOME, KC_PGDN, KC_END, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_INSERT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [4] = KEYMAP( /* CMD60 - Mouse */ + KC_SYSTEM_SLEEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_WH_UP, KC_MS_BTN3, KC_MS_WH_DOWN, KC_NO, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + [5] = KEYMAP( /* CMD60 - Media */ + KC_SYSTEM_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_MEDIA_NEXT_TRACK, KC_MEDIA_PLAY_PAUSE, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WWW_BACK, KC_WWW_FORWARD, KC_NO, KC_NO, KC_WWW_REFRESH, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/jd45/readme.md b/keyboards/jd45/readme.md new file mode 100644 index 000000000..2822666e8 --- /dev/null +++ b/keyboards/jd45/readme.md @@ -0,0 +1,4 @@ +JD45 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/phantom/readme.md b/keyboards/phantom/readme.md new file mode 100644 index 000000000..190f738fa --- /dev/null +++ b/keyboards/phantom/readme.md @@ -0,0 +1,4 @@ +Phantom keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile index 184b5ac37..a0879fc9c 100644 --- a/keyboards/satan/Makefile +++ b/keyboards/satan/Makefile @@ -52,7 +52,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) diff --git a/keyboards/satan/keymaps/sethbc/Makefile b/keyboards/satan/keymaps/sethbc/Makefile new file mode 100644 index 000000000..2a7ff2779 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md new file mode 100644 index 000000000..aa301f020 --- /dev/null +++ b/keyboards/satan/readme.md @@ -0,0 +1,4 @@ +Clueboard keyboard firmware +====================== + +TODO: to be updated. diff --git a/quantum/keymap_extras/keymap_dvorak.h b/quantum/keymap_extras/keymap_dvorak.h index e855056e8..17f205977 100644 --- a/quantum/keymap_extras/keymap_dvorak.h +++ b/quantum/keymap_extras/keymap_dvorak.h @@ -18,18 +18,19 @@ #define DV_LBRC KC_MINS #define DV_RBRC KC_EQL -#define DV_QUOT KC_Q +#define DV_QUOT KC_Q #define DV_COMM KC_W #define DV_DOT KC_E #define DV_P KC_R #define DV_Y KC_T #define DV_F KC_Y #define DV_G KC_U -#define DV_C KC_I +#define DV_C KC_I #define DV_R KC_O #define DV_L KC_P #define DV_SLSH KC_LBRC #define DV_EQL KC_RBRC +#define DV_BSLS KC_BSLS #define DV_A KC_A #define DV_O KC_S @@ -68,7 +69,13 @@ #define DV_RPRN LSFT(DV_0) #define DV_LCBR LSFT(DV_LBRC) #define DV_RCBR LSFT(DV_RBRC) -#define DV_UNDS LSFT(DV_MINS) -#define DV_PLUS LSFT(DV_EQL) + +#define DV_QUES LSFT(DV_SLSH) +#define DV_PLUS LSFT(DV_EQL) +#define DV_PIPE LSFT(DV_BSLS) + +#define DV_UNDS LSFT(DV_MINS) + +#define DV_COLN LSFT(DV_SCLN) #endif diff --git a/quantum/keymap_extras/keymap_fr_ch.h b/quantum/keymap_extras/keymap_fr_ch.h index 3fd971357..87d4bb24c 100644 --- a/quantum/keymap_extras/keymap_fr_ch.h +++ b/quantum/keymap_extras/keymap_fr_ch.h @@ -4,7 +4,7 @@ #include "keymap.h" // Alt gr -#define ALGR(kc) kc | 0x1400 +#define ALGR(kc) RALT(kc) #define FR_CH_ALGR KC_RALT // normal characters diff --git a/quantum/keymap_extras/keymap_french.h b/quantum/keymap_extras/keymap_french.h index 2a44c80b1..834c69650 100644 --- a/quantum/keymap_extras/keymap_french.h +++ b/quantum/keymap_extras/keymap_french.h @@ -4,7 +4,7 @@ #include "keymap.h" // Alt gr -#define ALGR(kc) kc | 0x1400 +#define ALGR(kc) RALT(kc) #define NO_ALGR KC_RALT // Normal characters @@ -80,4 +80,4 @@ #define FR_EURO ALGR(KC_E) #define FR_BULT ALGR(FR_DLR) -#endif
\ No newline at end of file +#endif diff --git a/quantum/keymap_extras/keymap_german.h b/quantum/keymap_extras/keymap_german.h index 3f9ae8bad..7e2e0ed44 100644 --- a/quantum/keymap_extras/keymap_german.h +++ b/quantum/keymap_extras/keymap_german.h @@ -4,7 +4,7 @@ #include "keymap.h" // Alt gr -#define ALGR(kc) kc | 0x1400 +#define ALGR(kc) RALT(kc) #define DE_ALGR KC_RALT // normal characters diff --git a/quantum/keymap_extras/keymap_german_ch.h b/quantum/keymap_extras/keymap_german_ch.h index 6a782bcd7..b66d582a4 100644 --- a/quantum/keymap_extras/keymap_german_ch.h +++ b/quantum/keymap_extras/keymap_german_ch.h @@ -4,7 +4,7 @@ #include "keymap.h" // Alt gr -#define ALGR(kc) kc | 0x1400 +#define ALGR(kc) RALT(kc) #define CH_ALGR KC_RALT // normal characters diff --git a/quantum/keymap_extras/keymap_nordic.h b/quantum/keymap_extras/keymap_nordic.h index 3acb8b698..f8cf4e2e4 100644 --- a/quantum/keymap_extras/keymap_nordic.h +++ b/quantum/keymap_extras/keymap_nordic.h @@ -4,7 +4,7 @@ #include "keymap.h" // Alt gr -#define ALGR(kc) kc | 0x1400 +#define ALGR(kc) RALT(kc) #define NO_ALGR KC_RALT // Normal characters diff --git a/quantum/keymap_extras/keymap_spanish.h b/quantum/keymap_extras/keymap_spanish.h index af76e39fc..4ba568af2 100644 --- a/quantum/keymap_extras/keymap_spanish.h +++ b/quantum/keymap_extras/keymap_spanish.h @@ -4,7 +4,7 @@ #include "keymap.h" // Alt gr -#define ALGR(kc) kc | 0x1400 +#define ALGR(kc) RALT(kc) #define NO_ALGR KC_RALT // Normal characters diff --git a/quantum/keymap_extras/keymap_uk.h b/quantum/keymap_extras/keymap_uk.h index 5c5d95179..00c87afc3 100644 --- a/quantum/keymap_extras/keymap_uk.h +++ b/quantum/keymap_extras/keymap_uk.h @@ -4,7 +4,7 @@ #include "keymap.h" // Alt gr -#define ALGR(kc) kc | 0x1400 +#define ALGR(kc) RALT(kc) #define NO_ALGR KC_RALT // Normal characters @@ -33,4 +33,4 @@ #define UK_AACT ALGR(KC_A) -#endif
\ No newline at end of file +#endif diff --git a/quantum/process_keycode/process_tap_dance.c b/quantum/process_keycode/process_tap_dance.c index 9b172e1b6..b9b836df2 100644 --- a/quantum/process_keycode/process_tap_dance.c +++ b/quantum/process_keycode/process_tap_dance.c @@ -22,10 +22,29 @@ static void _process_tap_dance_action_pair (qk_tap_dance_state_t *state, static void _process_tap_dance_action_fn (qk_tap_dance_state_t *state, qk_tap_dance_user_fn_t fn) { - fn(state); + if (fn) { + fn(state); + } +} + +void process_tap_dance_action_on_each_tap (uint16_t keycode) +{ + uint16_t idx = keycode - QK_TAP_DANCE; + qk_tap_dance_action_t action; + + action = tap_dance_actions[idx]; + + switch (action.type) { + case QK_TAP_DANCE_TYPE_FN: + _process_tap_dance_action_fn (&qk_tap_dance_state, action.fn.on_each_tap); + break; + + default: + break; + } } -void process_tap_dance_action (uint16_t keycode) +void process_tap_dance_action_on_dance_finished (uint16_t keycode) { uint16_t idx = keycode - QK_TAP_DANCE; qk_tap_dance_action_t action; @@ -38,7 +57,7 @@ void process_tap_dance_action (uint16_t keycode) action.pair.kc1, action.pair.kc2); break; case QK_TAP_DANCE_TYPE_FN: - _process_tap_dance_action_fn (&qk_tap_dance_state, action.fn); + _process_tap_dance_action_fn (&qk_tap_dance_state, action.fn.on_dance_finished); break; default: @@ -51,8 +70,9 @@ bool process_tap_dance(uint16_t keycode, keyrecord_t *record) { switch(keycode) { case QK_TAP_DANCE ... QK_TAP_DANCE_MAX: + process_tap_dance_action_on_each_tap (qk_tap_dance_state.keycode); if (qk_tap_dance_state.keycode && qk_tap_dance_state.keycode != keycode) { - process_tap_dance_action (qk_tap_dance_state.keycode); + process_tap_dance_action_on_dance_finished (qk_tap_dance_state.keycode); } else { r = false; } @@ -66,8 +86,9 @@ bool process_tap_dance(uint16_t keycode, keyrecord_t *record) { default: if (qk_tap_dance_state.keycode) { - process_tap_dance_action (qk_tap_dance_state.keycode); - + // if we are here, the tap dance was interrupted by a different key + process_tap_dance_action_on_each_tap (qk_tap_dance_state.keycode); + process_tap_dance_action_on_dance_finished (qk_tap_dance_state.keycode); reset_tap_dance (&qk_tap_dance_state); } break; @@ -78,13 +99,28 @@ bool process_tap_dance(uint16_t keycode, keyrecord_t *record) { void matrix_scan_tap_dance () { if (qk_tap_dance_state.keycode && timer_elapsed (qk_tap_dance_state.timer) > TAPPING_TERM) { - process_tap_dance_action (qk_tap_dance_state.keycode); - + // if we are here, the tap dance was timed out + process_tap_dance_action_on_dance_finished (qk_tap_dance_state.keycode); reset_tap_dance (&qk_tap_dance_state); } } void reset_tap_dance (qk_tap_dance_state_t *state) { + uint16_t idx = state->keycode - QK_TAP_DANCE; + qk_tap_dance_action_t action; + + action = tap_dance_actions[idx]; + switch (action.type) { + case QK_TAP_DANCE_TYPE_FN: + if (action.fn.on_reset) { + action.fn.on_reset(state); + } + break; + + default: + break; + } + state->keycode = 0; state->count = 0; } diff --git a/quantum/process_keycode/process_tap_dance.h b/quantum/process_keycode/process_tap_dance.h index b9d7c7fcf..7b820584a 100644 --- a/quantum/process_keycode/process_tap_dance.h +++ b/quantum/process_keycode/process_tap_dance.h @@ -31,18 +31,27 @@ typedef struct uint16_t kc1; uint16_t kc2; } pair; - qk_tap_dance_user_fn_t fn; + struct { + qk_tap_dance_user_fn_t on_each_tap; + qk_tap_dance_user_fn_t on_dance_finished; + qk_tap_dance_user_fn_t on_reset; + } fn; }; } qk_tap_dance_action_t; #define ACTION_TAP_DANCE_DOUBLE(kc1, kc2) { \ - .type = QK_TAP_DANCE_TYPE_PAIR, \ - .pair = { kc1, kc2 } \ + .type = QK_TAP_DANCE_TYPE_PAIR, \ + .pair = { kc1, kc2 } \ } -#define ACTION_TAP_DANCE_FN(user_fn) { \ +#define ACTION_TAP_DANCE_FN(user_fn) { \ .type = QK_TAP_DANCE_TYPE_FN, \ - .fn = user_fn \ + .fn = { NULL, user_fn, NULL } \ + } + +#define ACTION_TAP_DANCE_FN_ADVANCED(user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_reset) { \ + .type = QK_TAP_DANCE_TYPE_FN, \ + .fn = { user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_reset } \ } extern const qk_tap_dance_action_t tap_dance_actions[]; @@ -35,7 +35,7 @@ This is not a tiny project. While this is the main readme, there are many other * The list of possible keycodes you can use in your keymap is actually spread out in a few different places: * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes. * [quantum/keymap.h](quantum/keymap.h) - this is where the QMK-specific aliases are all set up. Things like the Hyper and Meh key, the Leader key, and all of the other QMK innovations. These are also explained and documented below, but `keymap.h` is where they're actually defined. -* The [TMK documentation](doc/TMK_readme.md). QMK is based on TMK, and this explains how it works internally. +* The [TMK documentation](doc/TMK_README.md). QMK is based on TMK, and this explains how it works internally. # Getting started @@ -75,8 +75,23 @@ Debian/Ubuntu example: sudo apt-get update sudo apt-get install gcc-avr avr-libc dfu-programmer +### Docker + +If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker](https://www.docker.com/products/docker), run the following command at the root of the QMK folder to build a keyboard/keymap: + +```bash +# You'll run this every time you want to build a keymap +# modify the keymap and keyboard assigment to compile what you want +# defaults are ergodox_ez/default + +docker run -e keymap=gwen -e keyboard=ergodox_ez --rm -v $('pwd'):/qmk:rw edasque/qmk_firmware + +``` + +This will compile the targetted keyboard/keymap and leave it in your QMK directory for you to flash. + ### Vagrant -If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md). +If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](doc/VAGRANT_GUIDE.md). ## Verify Your Installation 1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application. @@ -97,7 +112,7 @@ In every keymap folder, the following files are recommended: The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboards/<keyboard>/`), or your keymap folder (`/keyboards/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)). -By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. Your .hex file will also be available on qmk.fm/keyboards/<keyboard>/keymaps/<keymap>/. +By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. Below are some definitions that will be useful: @@ -372,10 +387,11 @@ But lets start with how to use it, first! First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array. -This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are two possible options: +This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are three possible options: * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. -* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the current state of the tap-dance action. +* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action. +* `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets. The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. @@ -399,7 +415,8 @@ In the end, let's see a full example! enum { CT_SE = 0, CT_CLN, - CT_EGG + CT_EGG, + CT_FLSH, }; /* Have the above three on the keymap, TD(CT_SE), etc... */ @@ -424,10 +441,50 @@ void dance_egg (qk_tap_dance_state_t *state) { } } +// on each tap, light up one led, from right to left +// on the forth tap, turn them off from right to left +void dance_flsh_each(qk_tap_dance_state_t *state) { + switch (state->count) { + case 1: + ergodox_right_led_3_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_1_on(); + break; + case 4: + ergodox_right_led_3_off(); + _delay_ms(50); + ergodox_right_led_2_off(); + _delay_ms(50); + ergodox_right_led_1_off(); + } +} + +// on the fourth tap, set the keyboard on flash state +void dance_flsh_finished(qk_tap_dance_state_t *state) { + if (state->count >= 4) { + reset_keyboard(); + reset_tap_dance(state); + } +} + +// if the flash state didnt happen, then turn off leds, left to right +void dance_flsh_reset(qk_tap_dance_state_t *state) { + ergodox_right_led_1_off(); + _delay_ms(50); + ergodox_right_led_2_off(); + _delay_ms(50); + ergodox_right_led_3_off(); +} + const qk_tap_dance_action_t tap_dance_actions[] = { [CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT) ,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln) ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg) + ,[CT_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED (dance_flsh_each, dance_flsh_finished, dance_flsh_reset) }; ``` @@ -732,7 +789,7 @@ float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); float goodbye[][2] = SONG(GOODBYE_SOUND); ``` -Wherein we bind predefined songs (from [audio/song_list.h](/audio/song_list.h)) into named variables. This is one optimization that helps save on memory: These songs only take up memory when you reference them in your keymap, because they're essentially all preprocessor directives. +Wherein we bind predefined songs (from [quantum/audio/song_list.h](/quantum/audio/song_list.h)) into named variables. This is one optimization that helps save on memory: These songs only take up memory when you reference them in your keymap, because they're essentially all preprocessor directives. So now you have something called `tone_plover` for example. How do you make it play the Plover tune, then? If you look further down the keymap, you'll see this: @@ -774,7 +831,7 @@ AutoHotkey inserts the Text right of `Send, ` when this combination is pressed. ## RGB Under Glow Mod - + Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY). @@ -799,7 +856,7 @@ The firmware supports 5 different light effects, and the color (hue, saturation, ### WS2812 Wiring - + Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20. diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index 3bf2b34f8..6c03e1650 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -107,6 +107,10 @@ flip: $(BUILD_DIR)/$(TARGET).hex batchisp -hardware usb -device $(MCU) -operation start reset 0 dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter + until dfu-programmer $(MCU) get bootloader-version; do\ + echo "Error: Bootloader not found. Trying again in 5s." ;\ + sleep 5 ;\ + done ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1))) dfu-programmer $(MCU) erase --force else diff --git a/tmk_core/protocol/lufa/descriptor.c b/tmk_core/protocol/lufa/descriptor.c index 850a20fdb..539a58d66 100644 --- a/tmk_core/protocol/lufa/descriptor.c +++ b/tmk_core/protocol/lufa/descriptor.c @@ -140,9 +140,9 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtrakeyReport[] = HID_RI_USAGE(8, 0x80), /* System Control */ HID_RI_COLLECTION(8, 0x01), /* Application */ HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM), - HID_RI_LOGICAL_MINIMUM(16, 0x0001), + HID_RI_LOGICAL_MINIMUM(16, 0x0081), HID_RI_LOGICAL_MAXIMUM(16, 0x00B7), - HID_RI_USAGE_MINIMUM(16, 0x0001), /* System Power Down */ + HID_RI_USAGE_MINIMUM(16, 0x0081), /* System Power Down */ HID_RI_USAGE_MAXIMUM(16, 0x00B7), /* System Display LCD Autoscale */ HID_RI_REPORT_SIZE(8, 16), HID_RI_REPORT_COUNT(8, 1), |