diff options
140 files changed, 5122 insertions, 1986 deletions
diff --git a/build_keyboard.mk b/build_keyboard.mk index 2c64e93a2..4a6fc0980 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -161,18 +161,26 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes) SRC += $(QUANTUM_DIR)/audio/luts.c endif +ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes) + OPT_DEFS += -DFAUXCLICKY_ENABLE + SRC += $(QUANTUM_DIR)/fauxclicky.c +endif + ifeq ($(strip $(UCIS_ENABLE)), yes) OPT_DEFS += -DUCIS_ENABLE - UNICODE_ENABLE = yes + SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c + SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c endif ifeq ($(strip $(UNICODEMAP_ENABLE)), yes) OPT_DEFS += -DUNICODEMAP_ENABLE - UNICODE_ENABLE = yes + SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c + SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c endif ifeq ($(strip $(UNICODE_ENABLE)), yes) OPT_DEFS += -DUNICODE_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c endif diff --git a/keyboards/clueboard/keymaps/caps_fn/keymap.c b/keyboards/clueboard/keymaps/caps_fn/keymap.c new file mode 100644 index 000000000..37f00e8d8 --- /dev/null +++ b/keyboards/clueboard/keymaps/caps_fn/keymap.c @@ -0,0 +1,83 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mods_pressed) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/caps_fn/layout.png b/keyboards/clueboard/keymaps/caps_fn/layout.png Binary files differnew file mode 100644 index 000000000..a5bd57adb --- /dev/null +++ b/keyboards/clueboard/keymaps/caps_fn/layout.png diff --git a/keyboards/clueboard/keymaps/caps_fn/readme.md b/keyboards/clueboard/keymaps/caps_fn/readme.md new file mode 100644 index 000000000..74ad01fca --- /dev/null +++ b/keyboards/clueboard/keymaps/caps_fn/readme.md @@ -0,0 +1,15 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# Caps Fn Layout + +This is the default layout except that Caps Lock acts like Caps Lock when +tapped but Fn when held. diff --git a/keyboards/clueboard/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c index 01f158bf0..37f00e8d8 100644 --- a/keyboards/clueboard/keymaps/default/keymap.c +++ b/keyboards/clueboard/keymaps/default/keymap.c @@ -1,7 +1,8 @@ #include "clueboard.h" -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -9,21 +10,10 @@ // entirely and just use numbers. #define _BL 0 #define _FL 1 -#define _RS 2 +#define _CL 2 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,--------------------------------------------------------------------------. ,----. - * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| - * |--------------------------------------------------------------------------| |----| - * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| - * |--------------------------------------------------------------------------| `----' - * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| - * |-----------------------------------------------------------------------------. - * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| - * |------------------------------------------------------------------------|----|----. - * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| - * `----------------------------------------------------------------------------------' + /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ @@ -33,61 +23,44 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer - * ,--------------------------------------------------------------------------. ,----. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| - * |--------------------------------------------------------------------------| |----| - * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | |PGUP| - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL|HOME|PGDN| END| - * `----------------------------------------------------------------------------------' */ [_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), - /* Keymap _RS: Reset layer - * ,--------------------------------------------------------------------------. ,----. - * | | | | | | | | | | | | | | | | | | - * |--------------------------------------------------------------------------| |----| - * | | | | |RESET| | | | | | | | | | | | - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL| | | | - * `----------------------------------------------------------------------------------' + /* Keymap _CL: Control layer */ -[_RS] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), -}; - -enum function_id { - SHIFT_ESC, +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), + [0] = ACTION_FUNCTION(0), // Calls action_function() }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; + static uint8_t mods_pressed; + switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + if (record->event.pressed) { - if (shift_esc_shift_mask) { + /* The key is being pressed. + */ + if (mods_pressed) { add_key(KC_GRV); send_keyboard_report(); } else { @@ -95,7 +68,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { send_keyboard_report(); } } else { - if (shift_esc_shift_mask) { + /* The key is being released. + */ + if (mods_pressed) { del_key(KC_GRV); send_keyboard_report(); } else { diff --git a/keyboards/clueboard/keymaps/default/layout.png b/keyboards/clueboard/keymaps/default/layout.png Binary files differnew file mode 100644 index 000000000..cd318163e --- /dev/null +++ b/keyboards/clueboard/keymaps/default/layout.png diff --git a/keyboards/clueboard/keymaps/default/readme.md b/keyboards/clueboard/keymaps/default/readme.md new file mode 100644 index 000000000..cede17ee1 --- /dev/null +++ b/keyboards/clueboard/keymaps/default/readme.md @@ -0,0 +1,17 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# Default Clueboard Layout + +This is the default layout that comes flashed on every Clueboard. For the most +part it's a straightforward and easy to follow layout. The only unusual key is +the key in the upper left, which sends Escape normally, but Grave when any of +the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/keymaps/mac_optimized/keymap.c b/keyboards/clueboard/keymaps/mac_optimized/keymap.c new file mode 100644 index 000000000..59f7ff243 --- /dev/null +++ b/keyboards/clueboard/keymaps/mac_optimized/keymap.c @@ -0,0 +1,83 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mods_pressed) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/mac_optimized/layout.png b/keyboards/clueboard/keymaps/mac_optimized/layout.png Binary files differnew file mode 100644 index 000000000..e84ba54ea --- /dev/null +++ b/keyboards/clueboard/keymaps/mac_optimized/layout.png diff --git a/keyboards/clueboard/keymaps/mac_optimized/readme.md b/keyboards/clueboard/keymaps/mac_optimized/readme.md new file mode 100644 index 000000000..940e09125 --- /dev/null +++ b/keyboards/clueboard/keymaps/mac_optimized/readme.md @@ -0,0 +1,15 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# Default Clueboard Layout for Mac + +This is the default Clueboard layout with Alt and GUI switched to match Mac +conventions. diff --git a/keyboards/clueboard/keymaps/max/Makefile b/keyboards/clueboard/keymaps/max/Makefile deleted file mode 100644 index 950dadf84..000000000 --- a/keyboards/clueboard/keymaps/max/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Build Options -# change to "no" to disable the options, or define them in the makefile.mk in -# the appropriate keymap folder that will get included automatically -# -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/clueboard/keymaps/max/keymap.c b/keyboards/clueboard/keymaps/max/keymap.c deleted file mode 100644 index 193809840..000000000 --- a/keyboards/clueboard/keymaps/max/keymap.c +++ /dev/null @@ -1,85 +0,0 @@ -#include "clueboard.h" - -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 -#define _RS 2 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,--------------------------------------------------------------------------. ,----. - * | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp| - * |--------------------------------------------------------------------------| |----| - * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn| - * |--------------------------------------------------------------------------| `----' - * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| - * |-----------------------------------------------------------------------------. - * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up| - * |------------------------------------------------------------------------|----|----. - * | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght| - * `----------------------------------------------------------------------------------' - */ -[_BL] = KEYMAP( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ - MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Keymap _FL: Function Layer - * ,--------------------------------------------------------------------------. ,----. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| - * |--------------------------------------------------------------------------| |----| - * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | |PGUP| - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL|HOME|PGDN| END| - * `----------------------------------------------------------------------------------' - */ -[_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), - - /* Keymap _RS: Reset/Underlight layer - * ,--------------------------------------------------------------------------. ,----. - * | | | | | | | | | | | | | | | | | | - * |--------------------------------------------------------------------------| |----| - * | | | | |RESET| | | | | | | | | | | | - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL| | | | - * `----------------------------------------------------------------------------------' - */ -[_RS] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ - KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ - KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), -}; - -/*enum function_id { -};*/ - -const uint16_t PROGMEM fn_actions[] = { -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { - } -} diff --git a/keyboards/clueboard/keymaps/maximised/keymap.c b/keyboards/clueboard/keymaps/maximised/keymap.c new file mode 100644 index 000000000..ebaefa669 --- /dev/null +++ b/keyboards/clueboard/keymaps/maximised/keymap.c @@ -0,0 +1,47 @@ +#include "clueboard.h" + +// Helpful defines +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, \ + _______, _______, _______,_______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Reset/Underlight layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +const uint16_t PROGMEM fn_actions[] = { +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { +}; diff --git a/keyboards/clueboard/keymaps/maximised/layout.png b/keyboards/clueboard/keymaps/maximised/layout.png Binary files differnew file mode 100644 index 000000000..bdc5d7623 --- /dev/null +++ b/keyboards/clueboard/keymaps/maximised/layout.png diff --git a/keyboards/clueboard/keymaps/maximised/readme.md b/keyboards/clueboard/keymaps/maximised/readme.md new file mode 100644 index 000000000..b95d1750f --- /dev/null +++ b/keyboards/clueboard/keymaps/maximised/readme.md @@ -0,0 +1,14 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# Maximised Clueboard Layout + +This layout is intended for a board with one or both shifts split. The outside key on the split shift is an Fn, while the inside is shift. The bottom row has all the mods on both sides, optimised for a Mac. diff --git a/keyboards/clueboard/keymaps/mouse_keys/Makefile b/keyboards/clueboard/keymaps/mouse_keys/Makefile new file mode 100644 index 000000000..6c605daec --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/Makefile @@ -0,0 +1 @@ +MOUSEKEY_ENABLE = yes diff --git a/keyboards/clueboard/keymaps/mouse_keys/keymap.c b/keyboards/clueboard/keymaps/mouse_keys/keymap.c new file mode 100644 index 000000000..a9c5cebd0 --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/keymap.c @@ -0,0 +1,93 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 +#define _ML 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), + + /* Keymap _ML: Mouse layer + */ + [_ML] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \ + _______, _______, KC_BTN3,KC_BTN2,KC_BTN1,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MS_U, \ + _______, _______, _______,_______, LT(_ML, KC_SPC),LT(_ML, KC_SPC), _______, KC_BTN1, KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mods_pressed) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/mouse_keys/layout.png b/keyboards/clueboard/keymaps/mouse_keys/layout.png Binary files differnew file mode 100644 index 000000000..52e5c4581 --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/layout.png diff --git a/keyboards/clueboard/keymaps/mouse_keys/readme.md b/keyboards/clueboard/keymaps/mouse_keys/readme.md new file mode 100644 index 000000000..97ac6dfa2 --- /dev/null +++ b/keyboards/clueboard/keymaps/mouse_keys/readme.md @@ -0,0 +1,16 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# MouseKeys Layout + +This layout adds a mouse layer. When you hold down the spacebar the arrow keys +will move your mouse cursor. You can click using the 3 mods to the left of the +arrow keys, or the 3 keys under your primary fingers on the home row. diff --git a/keyboards/clueboard/keymaps/shift_fn/keymap.c b/keyboards/clueboard/keymaps/shift_fn/keymap.c new file mode 100644 index 000000000..f21b9b589 --- /dev/null +++ b/keyboards/clueboard/keymaps/shift_fn/keymap.c @@ -0,0 +1,83 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer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eymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mods_pressed) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/shift_fn/layout.png b/keyboards/clueboard/keymaps/shift_fn/layout.png Binary files differnew file mode 100644 index 000000000..66d85410c --- /dev/null +++ b/keyboards/clueboard/keymaps/shift_fn/layout.png diff --git a/keyboards/clueboard/keymaps/shift_fn/readme.md b/keyboards/clueboard/keymaps/shift_fn/readme.md new file mode 100644 index 000000000..369f556f8 --- /dev/null +++ b/keyboards/clueboard/keymaps/shift_fn/readme.md @@ -0,0 +1,17 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# Shift Fn Clueboard Layout + +This is an experimental layout. It makes the left shift key a dual roll key. +For most keys it acts as a shift key, but for some keys it activates an +alternate function instead. Primarily I use this to access the F-keys under +the number rows. diff --git a/keyboards/clueboard/keymaps/skully/keymap.c b/keyboards/clueboard/keymaps/skully/keymap.c index df6f054e0..295090352 100644 --- a/keyboards/clueboard/keymaps/skully/keymap.c +++ b/keyboards/clueboard/keymaps/skully/keymap.c @@ -1,7 +1,8 @@ #include "clueboard.h" -// Used for SHIFT_ESC -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. @@ -9,21 +10,10 @@ // entirely and just use numbers. #define _BL 0 #define _FL 1 -#define _RS 2 +#define _CL 2 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap _BL: (Base Layer) Default Layer - * ,--------------------------------------------------------------------------. ,----. - * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| - * |--------------------------------------------------------------------------| |----| - * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| - * |--------------------------------------------------------------------------| `----' - * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| - * |-----------------------------------------------------------------------------. - * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| - * |------------------------------------------------------------------------|----|----. - * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| - * `----------------------------------------------------------------------------------' + /* Keymap _BL: Base Layer (Default Layer) */ [_BL] = KEYMAP( F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ @@ -33,61 +23,41 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer - * ,--------------------------------------------------------------------------. ,----. - * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| - * |--------------------------------------------------------------------------| |----| - * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | |PGUP| - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL|HOME|PGDN| END| - * `----------------------------------------------------------------------------------' */ [_FL] = KEYMAP( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \ - KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END), + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, BL_STEP, \ + _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______, _______, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \ + _______,_______,_______,MO(_FL), _______,_______, MO(_FL),_______,_______,MO(_FL),KC_HOME,KC_PGDN,KC_END), - /* Keymap _RS: Reset layer - * ,--------------------------------------------------------------------------. ,----. - * | | | | | | | | | | | | | | | | | | - * |--------------------------------------------------------------------------| |----| - * | | | | |RESET| | | | | | | | | | | | - * |--------------------------------------------------------------------------| `----' - * | | | _RS| | | | | | | | | | | | - * |-----------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |------------------------------------------------------------------------|----|----. - * | | | | | | | | | | _FL| | | | - * `----------------------------------------------------------------------------------' + /* Keymap _CL: Control layer */ -[_RS] = KEYMAP( - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS), -}; - -enum function_id { - SHIFT_ESC, +[_CL] = KEYMAP( + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,_______,_______,_______, _______,_______, _______,_______,_______,MO(_FL),_______, _______, _______), }; const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_FUNCTION(SHIFT_ESC), + [0] = ACTION_FUNCTION(0), }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; + static uint8_t mods_pressed; + switch (id) { - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + if (record->event.pressed) { - if (shift_esc_shift_mask) { + /* The key is being pressed. + */ + if (mods_pressed) { add_key(KC_GRV); send_keyboard_report(); } else { @@ -95,7 +65,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { send_keyboard_report(); } } else { - if (shift_esc_shift_mask) { + /* The key is being released. + */ + if (mods_pressed) { del_key(KC_GRV); send_keyboard_report(); } else { diff --git a/keyboards/clueboard/keymaps/skully/layout.png b/keyboards/clueboard/keymaps/skully/layout.png Binary files differnew file mode 100644 index 000000000..64854aaef --- /dev/null +++ b/keyboards/clueboard/keymaps/skully/layout.png diff --git a/keyboards/clueboard/keymaps/skully/readme.md b/keyboards/clueboard/keymaps/skully/readme.md index c1182123d..08255dfbc 100644 --- a/keyboards/clueboard/keymaps/skully/readme.md +++ b/keyboards/clueboard/keymaps/skully/readme.md @@ -1,3 +1,14 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + # skullY's Clueboard Layout This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing. diff --git a/keyboards/clueboard/keymaps/unix_optimized/keymap.c b/keyboards/clueboard/keymaps/unix_optimized/keymap.c new file mode 100644 index 000000000..9fbd77240 --- /dev/null +++ b/keyboards/clueboard/keymaps/unix_optimized/keymap.c @@ -0,0 +1,83 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_INS, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_DEL, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mods_pressed) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/unix_optimized/layout.png b/keyboards/clueboard/keymaps/unix_optimized/layout.png Binary files differnew file mode 100644 index 000000000..ea7d30e35 --- /dev/null +++ b/keyboards/clueboard/keymaps/unix_optimized/layout.png diff --git a/keyboards/clueboard/keymaps/unix_optimized/readme.md b/keyboards/clueboard/keymaps/unix_optimized/readme.md new file mode 100644 index 000000000..3510e138b --- /dev/null +++ b/keyboards/clueboard/keymaps/unix_optimized/readme.md @@ -0,0 +1,15 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# Default Clueboard Layout + +This is the default layout except that Caps Lock has been changed to Control +and Insert and Delete have been put into the Fn layer. diff --git a/keyboards/clueboard/keymaps/win_optimized/keymap.c b/keyboards/clueboard/keymaps/win_optimized/keymap.c new file mode 100644 index 000000000..a85f0824f --- /dev/null +++ b/keyboards/clueboard/keymaps/win_optimized/keymap.c @@ -0,0 +1,83 @@ +#include "clueboard.h" + +// Helpful defines +#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) +#define _______ KC_TRNS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _CL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: Base Layer (Default Layer) + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _CL: Control layer + */ +[_CL] = KEYMAP( + _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ + _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \ + _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ + MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \ + _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +/* This is a list of user defined functions. F(N) corresponds to item N + of this list. + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), // Calls action_function() +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t mods_pressed; + + switch (id) { + case 0: + /* Handle the combined Grave/Esc key + */ + mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed + + if (record->event.pressed) { + /* The key is being pressed. + */ + if (mods_pressed) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + /* The key is being released. + */ + if (mods_pressed) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/clueboard/keymaps/win_optimized/layout.png b/keyboards/clueboard/keymaps/win_optimized/layout.png Binary files differnew file mode 100644 index 000000000..7d8c82da7 --- /dev/null +++ b/keyboards/clueboard/keymaps/win_optimized/layout.png diff --git a/keyboards/clueboard/keymaps/win_optimized/readme.md b/keyboards/clueboard/keymaps/win_optimized/readme.md new file mode 100644 index 000000000..cede17ee1 --- /dev/null +++ b/keyboards/clueboard/keymaps/win_optimized/readme.md @@ -0,0 +1,17 @@ +``` + ___ _____ _ _ _ __ __ _ __ +|__ \ / ____| | | | | | / / / /(_) / / + ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / / + |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / / + |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _ + (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_) +``` + +![Clueboard Layout Image](layout.png) + +# Default Clueboard Layout + +This is the default layout that comes flashed on every Clueboard. For the most +part it's a straightforward and easy to follow layout. The only unusual key is +the key in the upper left, which sends Escape normally, but Grave when any of +the Ctrl, Alt, or GUI modifiers are held down. diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk index 3909fbd5c..7ce096ba8 100644 --- a/keyboards/clueboard/rules.mk +++ b/keyboards/clueboard/rules.mk @@ -90,14 +90,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +COMMAND_ENABLE ?= yes # Commands for debug and configuration NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE ?= no -RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality +RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c index b62b14449..aaf75d58f 100644 --- a/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c +++ b/keyboards/ergodox/keymaps/coderkun_neo2/keymap.c @@ -312,6 +312,8 @@ uint16_t hex_to_keycode(uint8_t hex) return NEO_E; case 0xF: return NEO_F; + default: + return KC_NO; } } } diff --git a/keyboards/ergodox/keymaps/colemak_programmer/Makefile b/keyboards/ergodox/keymaps/colemak_programmer/Makefile new file mode 100644 index 000000000..91b77c77a --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_programmer/Makefile @@ -0,0 +1 @@ +TAP_DANCE_ENABLE = no
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_001.jpg b/keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_001.jpg Binary files differnew file mode 100644 index 000000000..de24d9373 --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_001.jpg diff --git a/keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_002.jpg b/keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_002.jpg Binary files differnew file mode 100644 index 000000000..15f8ec8c4 --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_programmer/colemak_programmer_002.jpg diff --git a/keyboards/ergodox/keymaps/colemak_programmer/keymap.c b/keyboards/ergodox/keymaps/colemak_programmer/keymap.c new file mode 100644 index 000000000..1caccc5c2 --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_programmer/keymap.c @@ -0,0 +1,256 @@ +#include "ergodox.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * MEH: Alt+Control+Shift + * HYPER: Alt+Control+Shift+Gui + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ` ~ | 1 ! | 2 @ | 3 # | 4 $ | 5 % | 6 ^ | | 7 & | 8 * | 9 ( | 0 ) | - _ | = + | Backsp | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TAB | Q | W | F | P | G |TG(3) | |TG(4) | J | L | U | Y | ; : | ' " | + * |--------+------+------+------+------+------|F-lck | |N-lck |------+------+------+------+------+--------| + * | CAPS | A | R | S | T | D |------| |------| H | N | E | I | O | ENT | + * |--------+------+------+------+------+------| MEH | | MEH |------+------+------+------+------+--------| + * | Shift | Z | X | C | V | B | | | | K | M | , < | . > | UP | Shift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LCTL | LCTL | LGUI | LALT | LGUI | | RALT | RCTL | LEFT | DOWN | RIGHT| + * `----------------------------------' `----------------------------------' + * ,--------------. ,--------------. + * | Esc | App | | Ins | Del | + * ,------|------|-------| |------+-------+------. + * | | | Home | | PgUp | | | + * | MO(2)| MO(4)|-------| |------| Space |Space | + * |symbol|N-Lock| End | | PgDn | | | + * `---------------------' `---------------------' + */ +[0] = KEYMAP( // layer 0 : default + // left hand + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(3), + KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MEH, + KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI, + + KC_ESC, KC_APP, + KC_HOME, + MO(2), MO(4), KC_END, + + // right hand + KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + TG(4), KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_QUOT, + KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT, + KC_MEH, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSFT, + KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT, + + KC_INS, KC_DEL, + KC_PGUP, + KC_PGDN, KC_SPC, KC_SPC + ), + +/* Keymap 1: QWERTY layer (games) + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | Q | W | E | R | T | | | | Y | U | I | O | P | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | A | S | D | F | G |------| |------| H | J | K | L | ; | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Z | X | C | V | B | | | | N | M | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+--------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `----------------------' + */ +[1] = KEYMAP( // layer 1: QWERTY layer (games) + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, + KC_TRNS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TRNS, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_TRNS, + KC_TRNS, KC_N, KC_M, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), + +/* Keymap 2: Symbol Layer +* +* ,--------------------------------------------------. ,--------------------------------------------------. +* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | | +* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| +* | | | | + | < | % | # | DF(1)| | | & | [ | ] | \ | : | " | +* |--------+------+------+------+------+------|QWERTY| | |------+------+------+------+------+--------| +* | | ! | - | > | = | @ |------| |------| * | { | } | / | ? | | +* |--------+------+------+------+------+------| DF(0)| | |------+------+------+------+------+--------| +* | | NUBS | NUHS | / | $ | ^ |COLEMAK | | | | ( | ) | | | | +* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' +* | | | | | | | | | | | | +* `----------------------------------' `----------------------------------' +* ,-------------. ,-------------. +* | | | | | | +* ,------|------|------| |------+------+------. +* | | | | | | | | +* | | |------| |------| | | +* | | | | | | | | +* `--------------------' `--------------------' +*/ +// SYMBOLS +[2] = KEYMAP( + // left hand + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS, KC_PIPE, KC_PLUS, KC_LT, KC_PERC, KC_HASH, DF(1), + KC_LBRC, KC_EXCLAIM, KC_MINUS, KC_GT, KC_EQUAL, KC_AT, + KC_TRNS, KC_NUBS, KC_NUHS, KC_SLSH, KC_DOLLAR, KC_CIRC, DF(0), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + + // right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_AMPERSAND, KC_LBRC, KC_RBRC, KC_BSLS, KC_COLN, KC_DQT, + KC_ASTERISK, KC_LCBR, KC_RCBR, KC_SLSH, KC_QUES, KC_TRNS, + KC_TRNS, KC_PIPE, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 3: + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | HYPR | | HYPR | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------ |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// F-keys +[3] = KEYMAP( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + + // right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_HYPR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 4: Numlock + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | RESET | | | |P-SCRE|S-LOCK|PAUSE | |NLOCK | CALC | = | / | * | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | Vol+ | 7 | 8 | 9 | - | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| Vol- | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | HYPR | | HYPR | Mute | 1 | 2 | 3 |Enter | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | 0 | . | RCTL | RCTL | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------ |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[4] = KEYMAP( + RESET, KC_LSFT, KC_LSFT, KC_SYSREQ, KC_PSCR, KC_SLCK, KC_PAUSE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + + // right hand + KC_NLCK, KC_CALC, KC_PEQL, KC_PSLS, KC_PAST, KC_LSFT, KC_TRNS, + KC_TRNS, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_TRNS, + KC_VOLD, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS, + KC_HYPR, KC_MUTE, KC_P1, KC_P2, KC_P3, KC_PENT, KC_TRNS, + KC_TRNS, KC_P0, KC_PDOT, KC_RCTL, KC_RCTL, + + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + static uint8_t state; + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + + //reduce LED on time to 1/6th because LEDs are too strong + if (++state < 6) return; + state = 0; + + //bit 1: default layer 1 - QWERTY + if (default_layer_state & (1UL << 1)) ergodox_right_led_1_on(); + + uint8_t layer = biton32(layer_state); + + //layer 2 : Symbols (& Fs) + //if (layer == 2) ergodox_right_led_2_on(); + + //layer 3 : F-lock + if (layer == 3) ergodox_right_led_2_on(); + + //layer 4 : Num-lock + if (layer == 4) ergodox_right_led_3_on(); +}; diff --git a/keyboards/ergodox/keymaps/colemak_programmer/readme.md b/keyboards/ergodox/keymaps/colemak_programmer/readme.md new file mode 100644 index 000000000..db0cc5777 --- /dev/null +++ b/keyboards/ergodox/keymaps/colemak_programmer/readme.md @@ -0,0 +1,23 @@ +# ErgoDox EZ colemak_programmer + +## Features + +* Qwerty and colemak 2 in 1 + * Use DF() macro to swap the bottom layer so it behaves literally as collemak or qwerty + * Graphical creator did not allow this so I had to use TO(0) and TO(1) on the picture +* Symbol layer programmers friendly + * Not only symbols are easy to access but common combination are easy too: ->, =>, !=, etc. +* Windows and Mac + * The extra repeated Win key is very handy on Mac +* Numlock + +I came to this layout after several iterations. It is not the ultimate best ergonomic layout but it is the best if you switch back and forth between ergodox and laptops. + +## Notes +* The Quote and Enter can be swapped +* If you use sculpted key caps try turning the bottom key 180 degrees so it became very comfortable to type with thumb. + +Alternatively view the [graphical creator version](http://configure.ergodox-ez.com/keyboard_layouts/kmevwm/edit) but beware it is not the same due to the creator limitations. + +![Default](colemak_programmer_001.jpg) +![Default](colemak_programmer_002.jpg)
\ No newline at end of file diff --git a/keyboards/ergodox/keymaps/dvorak_emacs_software/keymap.c b/keyboards/ergodox/keymaps/dvorak_emacs_software/keymap.c new file mode 100755 index 000000000..a2bc15c99 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_emacs_software/keymap.c @@ -0,0 +1,166 @@ +#include "ergodox.h" +#include "keymap_dvorak.h" +#include "debug.h" +#include "action_layer.h" + +/****************************************************************************************** + * DVORAK LAYOUT (see http://djelibeibi.unex.es/dvorak/) + * Layer 1: auxiliary keys + * Layer 2: full qwerty layout + *****************************************************************************************/ + +// LAYERS +#define BASE 0 // dvorak layout (default) +#define AUX 1 // auxiliary keys + +// MACROS +/* #define OBRACE 0 // key { or shift */ +/* #define CBRACE 1 // key } or shift */ +/* #define OBRACK 2 // key [ or left alt */ +/* #define CBRACK 3 // key ] or left alt */ +/* #define CAPS 4 // caps lock */ + +// LEDS +#define USB_LED_NUM_LOCK 0 +#define USB_LED_CAPS_LOCK 1 +#define USB_LED_SCROLL_LOCK 2 +#define USB_LED_COMPOSE 3 +#define USB_LED_KANA 4 + +// TIMERS +#define KEY_TAP_FAST 85 +#define KEY_TAP_SLOW 95 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Base layer + * Keys with double values (like Esc/Ctrl) correspond to the 'tapped' key and the 'held' key, respectively + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | Esc | | Esc | 6 | 7 | 8 | 9 | 0 | = / + | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ~ |" / ' |, / < |. / > | P | Y | [ | | ] | F | G | C | H | L | / / ? | + * |--------+------+------+------+------+------| { | | } |------+------+------+------+------+--------| + * | Tab | A | O | E |U/LSft| I/L1 |------| |------| D/L1|R/RSft| T | N | S | - / _ | + * |--------+------+------+------+------+------| LGUI | | LGUI |------+------+------+------+------+--------| + * | {/LSft |; / : | Q | J | K | X | | | | B | M | W | V | Z | }/RSft | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | ~L1 | | ~L1 | | | \ / || | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | HOME | END | | LEFT | RIGHT| + * ,------|------|------| |------+--------+------. + * | BSPC | DEL | PGUP | | UP | SPACE |RETURN| + * | / | / |------| |------| / | / | + * | LCTL | LALT |PGDWN | | DOWN | LALT | LCTL | + * `--------------------' `----------------------' + * + */ +[BASE] = KEYMAP( + // left hand + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TILD, DV_QUOT, DV_COMM,DV_DOT, DV_P, DV_Y, DV_LBRC, + KC_TAB, DV_A, DV_O, DV_E, SFT_T(DV_U), LT(AUX, DV_I), + SFT_T(DV_LBRC), DV_SCLN, DV_Q, DV_J, DV_K, DV_X, KC_LGUI, + KC_NO, KC_NO, KC_NO, KC_NO, MO(AUX), + KC_HOME, KC_END, + KC_PGUP, + CTL_T(KC_BSPC), ALT_T(KC_DEL), KC_PGDN, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, DV_EQL, + DV_RBRC, DV_F, DV_G, DV_C, DV_R, DV_L, DV_SLSH, + LT(AUX, DV_D), SFT_T(DV_H), DV_T, DV_N, DV_S, DV_MINS, + KC_LGUI, DV_B, DV_M, DV_W, DV_V, DV_Z, SFT_T(DV_RBRC), + MO(AUX), KC_NO, KC_NO, KC_BSLS, KC_NO, + KC_LEFT, KC_RIGHT, + KC_UP, + KC_DOWN, ALT_T(KC_ENT), CTL_T(KC_SPC) + ), +/* Keymap 1: Aux layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | VolUp | | | | | | SLEEP | PWR | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | VolDn | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | * | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F5 | F6 | F7 | F8 | TRANS|------| |------|TRANS | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | |PSCR |------+-----aan+------+------+------+--------| + * | TRANS | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | / | TRANS | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS| | TRANS| . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | TRANS| TRANS| | TRANS| TRANS| + * ,------|------|------| |------+------+------. + * | | | TRANS| | TRANS| | | + * |TRANS |TRANS |------| |------| TRANS| TRANS| + * | | | TRANS| | TRANS| | | + * `--------------------' `--------------------' + */ +[AUX] = KEYMAP( + // left hand + KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_SLEP, + KC_VOLD, KC_F1, KC_F2, KC_F3, KC_F4, KC_NO, KC_NO, + KC_NO , KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, + LCTL(DV_S), LCTL(DV_Z), LCTL(DV_X), LCTL(DV_C), KC_TRNS, + KC_TRNS , KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_PWR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_7, KC_8, KC_9, KC_PAST, KC_NO, + KC_TRNS, KC_4, KC_5, KC_6, KC_PPLS, KC_NO, + KC_PSCR, KC_NO, KC_1, KC_2, KC_3, KC_PSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_PEQL, KC_NO, + KC_TRNS , KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(AUX) // FN1 - Momentary Layer 1 (Aux) +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } +} diff --git a/keyboards/ergodox/keymaps/dvorak_emacs_software/readme.md b/keyboards/ergodox/keymaps/dvorak_emacs_software/readme.md new file mode 100644 index 000000000..0e1e94ffe --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_emacs_software/readme.md @@ -0,0 +1,74 @@ +# Ergodox Dvorak Layout with emacs binding in mind - software version + +This configuration is the same as the dvorak_emacs layout, but using a sofware dvorak configuration +instead of a firmware configuration. This layout is for those who run their computer in dvorak mode. + + * Control & Alt key on the thumbs (activated if pressed with another key). + * In the same way, "U" and "R" are the shift modifier if pressed with another key. + * "I" and "D" set the layer 1 for the auxiliary keys if pressed with another key. + * Software layout set to english. + +## Keymap Layers + - L0: dvorak with some customizations (see layout below) + - L1: auxiliary keys (includes function keys, numpad...) + + +### Keymap 0: Base layer +Keys with double values (like U/LSft) correspond to the 'tapped' key and the 'held' key, respectively + +<pre><code> + +,--------------------------------------------------. ,--------------------------------------------------. +| | 1 | 2 | 3 | 4 | 5 | Esc | | Esc | 6 | 7 | 8 | 9 | 0 | = | +|--------|------|------|------|------|-------------| |------|------|------|------|------|------|--------| +| ~ | ' | , | . | P | Y | [ | | ] | F | G | C | H | L | / | +|--------|------|------|------|------|------| { | | } |------|------|------|------|------|--------| +| Tab | A | O | E |U/LSft| I/L1 |------| |------| D/L1|R/RSft| T | N | S | - | +|--------|------|------|------|------|------| LGUI | | LGUI |------|------|------|------|------|--------| +| {/LSft | ; | Q | J | K | X | | | | B | M | W | V | Z | }/RSft | +`--------|------|------|------|------|-------------' `-------------|------|------|------|------|--------' + | | | | | ~L1 | | ~L1 | | | \ | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | HOME | END | | LEFT | RIGHT| + ,------|------|------| |------|--------|------. + | BSPC | DEL | PGUP | | UP | SPACE |RETURN| + | / | / |------| |------| / | / | + | LCTL | LALT |PGDWN | | DOWN | LALT | LCTL | + `--------------------' `----------------------' + +</pre></code> + +### Keymap 1: Aux layer + +<pre><code> + +,--------------------------------------------------. ,--------------------------------------------------. +| VolUp | | | | | | SLEEP | PWR | | | | | | | +|--------|------|------|------|------|-------------| |------|------|------|------|------|------|--------| +| VolDn | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | * | | +|--------|------|------|------|------|------| | | |------|------|------|------|------|--------| +| | F5 | F6 | F7 | F8 | TRANS|------| |------|TRANS | 4 | 5 | 6 | + | | +|--------|------|------|------|------|------| | |PSCR |------|------|------|------|------|--------| +| TRANS | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | / | TRANS | +`--------|------|------|------|------|-------------' `-------------|------|------|------|------|--------' + |CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS| | TRANS| . | 0 | = | | + `----------------------------------' `----------------------------------' + ,-------------. ,-------------. + | TRANS| TRANS| | TRANS| TRANS| + ,------|------|------| |------|------|------. + | | | TRANS| | TRANS| | | + |TRANS |TRANS |------| |------| TRANS| TRANS| + | | | TRANS| | TRANS| | | + `--------------------' `--------------------' + +</pre></code> + + + +## Generation of .hex file +> In the "qmk_firmware/keyboards/ergodox" directory. + +> Execute "make dvorak_emacs". Then the hex file "ergodox_ez_dvorak_emacs.hex" is in the root directory : "qmk_firmware". + +> Flash with `teensy_loader` binary diff --git a/keyboards/ergodox/keymaps/german-lukas/README.md b/keyboards/ergodox/keymaps/german-lukas/README.md new file mode 100644 index 000000000..3566b4ee6 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-lukas/README.md @@ -0,0 +1,12 @@ +# About this keymap + +This keymap is based on the qwertz layout. +It has a key for pressing the left control and the left alt key at once. + +Linux makes a difference between AltGr and Control + Alt. Some keybindings are easier to press now. + +Also, I added a layer for pressing Control + Alt + F-Keys very fast. + +# Layer + +Each layer in the *keymap.c*-file has a comment showing the mappings of the layer. diff --git a/keyboards/ergodox/keymaps/german-lukas/keymap.c b/keyboards/ergodox/keymaps/german-lukas/keymap.c new file mode 100644 index 000000000..c6e9f2f90 --- /dev/null +++ b/keyboards/ergodox/keymaps/german-lukas/keymap.c @@ -0,0 +1,236 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "keymap_german.h" + +// Layer names +#define BASE 0 // default layer +#define SYMB 1 // symbol layer +#define MDIA 2 // media keys +#define SHRT 3 // shortcut layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | Caps | 1 | 2 | 3 | 4 | 5 |X ` X| | PRSC | 6 | 7 | 8 | 9 | 0 | ß | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Tab | Q | W | E | R | T | L1 | | L1 | Z | U | I | O | P | Ü | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Esc | A | S | D | F | G |------| |------| H | J | K | L | Ö | Ä/L2 | + * |--------+------+------+------+------+------| L2 | | L2 |------+------+------+------+------+--------| + * | LShift | Y | X | C | V | B | | | | N | M | , | . | - | RShift | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LGui | ^ | < | LEFT | RIGHT| | Up | Down | # | + | LCA | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | CTRL | ALT | | Alt |Ctrl/Esc| + * ,------+------+------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Del |------| |------| Bkspc | Enter| + * | | | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, DE_ACUT, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, DE_Y, KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + KC_LGUI, DE_CIRC, DE_LESS, KC_LEFT, KC_RIGHT, + KC_LCTRL, KC_LALT, + KC_HOME, + KC_SPC ,KC_DELT,KC_END, + // right hand + KC_PSCREEN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(MDIA), DE_Z, KC_U, KC_I, KC_O, KC_P, LT(SHRT,DE_UE), + KC_H, KC_J, KC_K, KC_L, DE_OE, LT(MDIA,DE_AE), + MEH_T(KC_NO), KC_N, KC_M, KC_COMM, KC_DOT, DE_MINS, KC_RSFT, + KC_UP, KC_DOWN, DE_HASH, DE_PLUS, LCA_T(KC_NO), + KC_RALT, KC_RCTRL, + KC_PGUP, + KC_PGDN, KC_BSPC, KC_ENT + ), + +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,DE_EXLM,DE_AT, DE_LCBR,DE_RCBR,DE_PIPE,KC_TRNS, + KC_TRNS,DE_HASH,DE_DLR, DE_LPRN,DE_RPRN,DE_GRV, + KC_TRNS,DE_PERC,DE_CIRC,DE_LBRC,DE_RBRC,DE_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, DE_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, DE_PLUS, KC_TRNS, + KC_TRNS, DE_AMPR, KC_1, KC_2, KC_3, DE_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, DE_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), + +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | Lclk | MsUp | Rclk | | | | | |VolDwn| Mute |VolUp | | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Btn4 |MsLeft|MsDown|MsRght| Btn5 |------| |------| | Prev | Stop | Play | Next | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |WhRght|WhDown| WhUp |WhLeft|WhClk | | | |BwSrch|BwBack|BwHome|BwRefr|BwFwd | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | |MsAcl0|MsAcl1|MsAcl2| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | |Brwser|Brwser| + * | Lclk | Rclk |------| |------|Back |Forwd | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + // left hand + KC_TRNS, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_TRNS, + KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, + KC_TRNS, KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN5, + KC_TRNS, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN3, KC_TRNS, + KC_TRNS, KC_TRNS, KC_ACL0, KC_ACL1, KC_ACL2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_BTN1, KC_BTN2, KC_TRNS, + // right hand + KC_TRNS, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11, + KC_TRNS, KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_F12, + KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS, + KC_TRNS, KC_WSCH, KC_WBAK, KC_WHOM, KC_WREF, KC_WFWD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_WBAK, KC_WFWD +), + +/* Keymap 3: Linux shortcuts + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | |LCA-F1|LCA-F2|LCA-F3|LCA-F4|LCA-F5| | | |LCA-F6|LCA-F7|LCA-F8|LCA-F9| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |LCA-Le| |LCA-Ri| |------| |------| | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | |LCA-Le|LCA-Ri| | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// Shortcuts +[SHRT] = KEYMAP( + // left hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, LCA(KC_F1), LCA(KC_F2), LCA(KC_F3), LCA(KC_F4), LCA(KC_F5), KC_TRNS, + KC_TRNS, KC_TRNS, LCA(KC_LEFT), KC_TRNS, LCA(KC_RIGHT), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, LCA(KC_LEFT), LCA(KC_RIGHT), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, LCA(KC_F6), LCA(KC_F7), LCA(KC_F8), LCA(KC_F9), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + LCA(KC_UP), LCA(KC_DOWN), KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case SYMB: + ergodox_right_led_1_on(); + break; + case MDIA: + ergodox_right_led_2_on(); + break; + case SHRT: + ergodox_right_led_3_on(); + break; + default: + ergodox_board_led_off(); + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/guni/keymap.c b/keyboards/ergodox/keymaps/guni/keymap.c new file mode 100644 index 000000000..f33829b8a --- /dev/null +++ b/keyboards/ergodox/keymaps/guni/keymap.c @@ -0,0 +1,177 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "bootloader.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP( // layer 0 : default + // left hand + KC_EQL , KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC, + KC_FN25 , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME, + KC_FN27 , KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP, + KC_LGUI , KC_GRV,KC_LEFT,KC_RGHT,KC_LALT, + KC_NO , KC_NO , + KC_NO , + KC_BSPC,KC_DEL ,KC_FN23, + // right hand + KC_RBRC , KC_6, KC_7 , KC_8, KC_9, KC_0, KC_MINS, + KC_END , KC_Y, KC_U , KC_I, KC_O, KC_P, KC_FN28, + KC_H , KC_J, KC_K , KC_L, KC_SCLN,KC_FN30, + KC_PGDN , KC_N, KC_M , KC_COMM,KC_DOT, KC_SLSH,KC_FN29, + KC_RALT , KC_DOWN,KC_UP, KC_NO ,KC_RGUI, + KC_NO , KC_NO, + KC_NO , + KC_FN29,KC_ENT ,KC_SPC + ), + + KEYMAP( // layer 1 : function and symbol keys + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + KC_TRNS,KC_AT,KC_UNDS ,KC_LBRC,KC_RBRC,KC_CIRC ,KC_TRNS, + KC_TRNS,KC_BSLS,KC_SLSH,KC_LCBR ,KC_RCBR ,KC_ASTR, + KC_TRNS,KC_HASH ,KC_DLR ,KC_PIPE ,KC_TILD ,KC_GRV ,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS,KC_EXLM,LSFT(KC_COMM),LSFT(KC_DOT),KC_EQL,KC_AMPR, KC_TRNS, + LSFT(KC_SLSH),KC_LPRN,KC_RPRN,KC_MINS,LSFT(KC_SCLN),KC_TRNS, + KC_TRNS,KC_PLUS,LSFT(KC_5),LSFT(KC_QUOT),KC_QUOT,KC_SCLN,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + KEYMAP( // layer 2: navigation + // left hand + KC_NO,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_PGUP,KC_HOME,KC_UP ,KC_END,KC_NO ,KC_TRNS, + KC_TRNS,KC_PGDN,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO,KC_NO,KC_NO, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS ,KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_END ,KC_TRNS, + KC_NO, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT,KC_TRNS, + KC_TRNS,KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP,KC_TRNS, + KC_LEFT, KC_DOWN,KC_RGHT,KC_PGDN,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + KEYMAP( // layer 3 : teensy bootloader functions + // left hand + KC_FN0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + + KEYMAP( // layer 4: numpad + // left hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS,KC_NLCK,KC_PSLS,KC_PAST,KC_PAST,KC_PMNS,KC_BSPC, + KC_TRNS,KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS,KC_BSPC, + KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT, + KC_TRNS,KC_NO, KC_P1, KC_P2, KC_P3, KC_PPLS,KC_PENT, + KC_P0, KC_PDOT,KC_SLSH,KC_PENT,KC_PENT, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + +}; + +/* id for user defined functions */ +enum function_id { + TEENSY_KEY, +}; + +/* + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(TEENSY_KEY), // FN0 - Teensy key + [1] = ACTION_LAYER_SET(0, ON_PRESS), + //[11] = ACTION_MODS_KEY(MOD_LSFT, KC_COMM), + //[12] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), + + //[14] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), + //[17] = ACTION_MODS_KEY(MOD_LSFT, KC_SCLN), + //[20] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + //[21] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), + [23] = ACTION_LAYER_SET(3, ON_PRESS), + [24] = ACTION_LAYER_SET(2, ON_PRESS), + [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_TAB), + [26] = ACTION_LAYER_SET(1, ON_PRESS), + [27] = ACTION_LAYER_TAP_KEY(1, KC_CAPS), + [28] = ACTION_MODS_TAP_KEY(MOD_RCTL,KC_BSLS), + //[29] = ACTION_LAYER_TOGGLE(4), + [29] = ACTION_MODS_TAP_KEY(MOD_RSFT,KC_ESC), + [30] = ACTION_LAYER_TAP_KEY(1, KC_QUOT), + [31] = ACTION_LAYER_MOMENTARY(2), + //[] = ACTION_LAYER_TAP_KEY(4, KC_S), +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) +{ + + if (id == TEENSY_KEY) { + clear_keyboard(); + print("\n\nJump to bootloader... "); + _delay_ms(250); + bootloader_jump(); // should not return + print("not supported.\n"); + } +} diff --git a/keyboards/ergodox/keymaps/guni/readme.txt b/keyboards/ergodox/keymaps/guni/readme.txt new file mode 100644 index 000000000..93ae5f056 --- /dev/null +++ b/keyboards/ergodox/keymaps/guni/readme.txt @@ -0,0 +1,133 @@ +My main layout (Layer 0) is based on qwerty. I tried to fit the layout of the kinesis keyboard onto the ergodox. Furthermore I did some tweaks. +The other layers are seldom used. Except the F Keys and the teensy key. As I own a ergodox I cant press the reset button, so i need a key to send the teensy into reprogram mode. +There is a layer with symbols a numpad. These layers are seldom used. Except the F Keys and the teensy key. As I own a ergodox I need a key to reprogram, because I can't access the reset button. + +I am a linux user and need the esc key and str keys often therefore it is easyly accessed. Switching console str+alt+tab+f2 (layer 2 and 2) is tricky but you get it after a while. +As I live in germany and need to type umlaut frquently, i mapped the CAPS to the meta key, and swapped ' and ". So I can type ö with CAPS o + ¨. no need to press o+SHIFT+' +As a note for linux users i use str+p to get last command, instead of using the cursor keys. + +HOWTO to convert CAPS to Meta-Key and swap ' with " + +* create file with following content +.Xmodmap + clear Lock + keycode 48 = quotedbl apostrophe quotedbl apostrophe + keycode 66 = Multi_key + +* apply with +xmodmap .Xmodmap + +* convert to xkbmap +xkbcomp $DISPLAY $HOME/.xkbmap + +* automatic startup each time you startup x +echo 'xkbcomp $HOME/.xkbmap $DISPLAY' >> ~/.xinitrc + + KEYMAP( // layer 0 : default + // left hand + KC_EQL , KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC, + KC_FN25 , KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME, + KC_FN27 , KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP, + KC_LGUI , KC_GRV,KC_LEFT,KC_RGHT,KC_LALT, + KC_NO , KC_NO , + KC_NO , + KC_BSPC,KC_DEL ,KC_FN23, + // right hand + KC_RBRC , KC_6, KC_7 , KC_8, KC_9, KC_0, KC_MINS, + KC_END , KC_Y, KC_U , KC_I, KC_O, KC_P, KC_FN28, + KC_H , KC_J, KC_K , KC_L, KC_SCLN,KC_FN30, + KC_PGDN , KC_N, KC_M , KC_COMM,KC_DOT, KC_SLSH,KC_FN29, + KC_RALT , KC_DOWN,KC_UP, KC_NO ,KC_RGUI, + KC_NO , KC_NO, + KC_NO , + KC_FN29,KC_ENT ,KC_SPC + ), + + KEYMAP( // layer 1 : function and symbol keys + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, + KC_TRNS,KC_AT,KC_UNDS ,KC_LBRC,KC_RBRC,KC_CIRC ,KC_TRNS, + KC_TRNS,KC_BSLS,KC_SLSH,KC_LCBR ,KC_RCBR ,KC_ASTR, + KC_TRNS,KC_HASH ,KC_DLR ,KC_PIPE ,KC_TILD ,KC_GRV ,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1, + // right hand + KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS,KC_EXLM,LSFT(KC_COMM),LSFT(KC_DOT),KC_EQL,KC_AMPR, KC_TRNS, + LSFT(KC_SLSH),KC_LPRN,KC_RPRN,KC_MINS,LSFT(KC_SCLN),KC_TRNS, + KC_TRNS,KC_PLUS,LSFT(KC_5),LSFT(KC_QUOT),KC_QUOT,KC_SCLN,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + KEYMAP( // layer 2: navigation + // left hand + KC_NO,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_PGUP,KC_HOME,KC_UP ,KC_END,KC_NO ,KC_TRNS, + KC_TRNS,KC_PGDN,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO,KC_NO,KC_NO, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS ,KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_END ,KC_TRNS, + KC_NO, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT,KC_TRNS, + KC_TRNS,KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP,KC_TRNS, + KC_LEFT, KC_DOWN,KC_RGHT,KC_PGDN,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + KEYMAP( // layer 3 : teensy bootloader functions + // left hand + KC_FN0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_FN1 , + // right hand + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + + + KEYMAP( // layer 4: numpad + // left hand + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS,KC_NLCK,KC_PSLS,KC_PAST,KC_PAST,KC_PMNS,KC_BSPC, + KC_TRNS,KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS,KC_BSPC, + KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS,KC_PENT, + KC_TRNS,KC_NO, KC_P1, KC_P2, KC_P3, KC_PPLS,KC_PENT, + KC_P0, KC_PDOT,KC_SLSH,KC_PENT,KC_PENT, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS + ), + +}; + + diff --git a/keyboards/ergodox/keymaps/josh/keymap.c b/keyboards/ergodox/keymaps/josh/keymap.c index b5463873a..da887fc64 100644 --- a/keyboards/ergodox/keymaps/josh/keymap.c +++ b/keyboards/ergodox/keymaps/josh/keymap.c @@ -8,15 +8,16 @@ #define MDIA 2 // media keys //macros -#define CTL_SFT_T 100 -#define CTL_SFT_G 101 -#define CTL_ALT_H 102 +#define CTL_SFT_T 100 // open type +#define CTL_SFT_G 101 // find references +#define CTL_ALT_H 102 // open call hierarchy +#define CTL_SFT_R 103 // open resource const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer * * ,--------------------------------------------------. ,--------------------------------------------------. - * | = | 1 | 2 | 3 | 4 | 5 | ESC | | M 100| 6 | 7 | 8 | 9 | 0 | - | + * | = | 1 | 2 | 3 | 4 | 5 | ESC | |M100/3| 6 | 7 | 8 | 9 | 0 | - | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * |TAB /Alt| Q | W | E | R | T | Meh | | Meh | Y | U | I | O | P |\ / ALT | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| @@ -38,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Otherwise, it needs KC_* [BASE] = KEYMAP( // layer 0 : default // left hand - KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + LT(MDIA, KC_EQL),KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, ALT_T(KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, ALL_T(KC_NO), KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(SYMB), @@ -47,11 +48,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_SPC,KC_BSPC,KC_END, // right hand - M(CTL_SFT_T),KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - MEH_T(KC_NO),KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),CTL_T(KC_QUOT), - MO(SYMB), KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, - LALT(KC_LSFT),KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT, + LT(M(CTL_SFT_T), + M(CTL_SFT_R)),KC_6, KC_7, KC_8, KC_9, KC_0, LT(MDIA, KC_MINS), + MEH_T(KC_NO), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), CTL_T(KC_QUOT), + MO(SYMB), KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, + LALT(KC_LSFT),KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT, KC_LALT, KC_CAPS, KC_PGUP, KC_PGDN,KC_DEL, KC_ENT @@ -101,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 2: Media and mouse keys * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | + * | | | | | | |RESET | |RESET | | | | | | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | | | | MsUp | | | | | | | | | | | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| @@ -121,7 +123,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ // MEDIA AND MOUSE [MDIA] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -130,7 +132,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, @@ -172,6 +174,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } return MACRO(U(LCTL), U(LALT), END); break; + case CTL_SFT_R: + if (record->event.pressed) { + return MACRO(D(LCTL), D(LSFT), T(R), END); + } + return MACRO(U(LCTL), U(LSFT), END); + break; } return MACRO_NONE; }; diff --git a/keyboards/ergodox/keymaps/ordinary/keymap.c b/keyboards/ergodox/keymaps/ordinary/keymap.c index 5c01d9678..1dfdf7e62 100644 --- a/keyboards/ergodox/keymaps/ordinary/keymap.c +++ b/keyboards/ergodox/keymaps/ordinary/keymap.c @@ -9,6 +9,7 @@ #define SYMB 1 // symbols layer #define MDIA 2 // media layer #define SPEC 3 // special layer +#define RBASE 4 // reverse default layer #define LSymb 10 // left symbol-shift key #define LMdia 11 // left media-shift key @@ -17,15 +18,23 @@ #define RMdia 14 // right media-shift key #define RSpec 15 // right special-shift key +#define NotEq 16 // != macro +#define GrtEq 17 // >= macro +#define LesEq 18 // <= macro +#define DeRef 19 // -> macro + #define MUL 20 // mouse up left #define MUR 21 // mouse up right #define MDL 22 // mouse down left #define MDR 23 // mouse down right + + /* - * The Ordinary Layout for the Ergodox EZ keyboard, v4.20 + * The Ordinary Layout for the Ergodox EZ keyboard, v5 * - * Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com + * Modifications from the default Ergodox EZ layout + * by Nicholas Keene ergodoxez@nicholaskeene.com * * No rights reserved. This software is in the public domain. * Credit me if you are friendly but if you're a jerk don't bother. @@ -44,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| * | Media Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \| Media | * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| - * | Symbol | A | S | D | F | G |------| |------| H | J | K | L | ; | '" Symbol | + * | Symbol | ^A | S | D | ^F | G |------| |------| H | ^J | K | L | ^; | '" Symbol | * |------------+------+------+------+------+------|Shift | | Tab |------+------+------+------+------+------------| * | Capitals | Z | X | C | V | B | -Tab | | | N | M | , | . | / | Capitals | * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' @@ -60,24 +69,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = KEYMAP( // left hand - F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC -,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC -,M(LSymb) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G -,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) -,KC_LCTL ,KC_MEH ,KC_HYPR,KC_LALT,KC_LGUI + F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC +,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC +,M(LSymb) ,LT(RBASE, KC_A),KC_S ,KC_D ,LT(RBASE, KC_F) ,KC_G +,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) +,KC_LCTL ,MEH_T(KC_NO) ,ALL_T(KC_NO),KC_LALT,KC_LGUI ,KC_HOME,KC_END ,KC_PGUP ,KC_BSPC,KC_DEL ,KC_PGDN // right hand - ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) - ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) - ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) - ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT - ,KC_RGUI,KC_RALT,KC_HYPR ,KC_MEH ,KC_RCTL + ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) + ,KC_H ,LT(RBASE, KC_J),KC_K ,KC_L ,LT(RBASE,KC_SCLN),F(RSymb) + ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT + ,KC_RGUI ,KC_RALT,KC_HYPR,KC_MEH ,KC_RCTL ,KC_LEFT ,KC_RGHT ,KC_UP ,KC_DOWN ,KC_ENT ,KC_SPC - ), +), /******* Symbols Layer ************************************************************************************************* * @@ -87,52 +96,52 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | ! | @ | { | } | & | < | | > | | | 7 | 8 | 9 | / | | * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| * | | # | $ | ( | ) | ` |------| |------| / | 4 | 5 | 6 | * | | - * |-----------+------+------+------+------+------| Tab | | Shift|------+------+------+------+------+-----------| - * | | % | ^ | [ | ] | ~ | | | -Tab| \ | 1 | 2 | 3 | - | | + * |-----------+------+------+------+------+------| ' | | " |------+------+------+------+------+-----------| + * | | % | ^ | [ | ] | ~ | | | | \ | 1 | 2 | 3 | - | | * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | LCtrl | Meh |Hyper | LAlt | LGui | | 0 | . | = | + | Ent | + * | ; | & | * | < | > | | 0 | . | = | + | Enter | * `-----------------------------------' `-----------------------------------' * ,-------------. ,-------------. - * | Left | Right| | Home | End | + * | |||| | |||| | | |||| | |||| | * ,------|------|------| |------+------+------. - * | | | Up | | PgUp | | | - * |Space |Enter |------| |------|BackSp| Del | - * | | | Down | | PgDn | | | + * | Plus | Equal| |||| | | |||| | Under| Dash | + * | | |------| |------| Score| | + * | + | = | != | | -> | _ | - | * `--------------------' `--------------------' */ [SYMB] = KEYMAP( // left hand - KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC -,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) -,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV -,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_TAB -,KC_LCTL ,KC_MEH ,KC_HYPR ,KC_LALT ,KC_LGUI - ,KC_LEFT ,KC_RGHT - ,KC_UP - ,KC_SPC ,KC_ENT ,KC_DOWN + KC_TRNS ,KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_ESC +,KC_TRNS ,KC_EXLM ,KC_AT ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM) +,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV +,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_QUOT +,KC_SCLN ,KC_AMPR ,KC_ASTR ,LSFT(KC_COMM),LSFT(KC_DOT) + ,M(GrtEq),M(LesEq) + ,KC_NO + ,KC_PLUS ,KC_EQL ,M(NotEq) // right hand - ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS - ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS - ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS - ,LSFT(KC_TAB),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS - ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT - ,KC_HOME ,KC_END - ,KC_PGUP - ,KC_PGDN ,KC_BSPC ,KC_DEL + ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS + ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS + ,KC_SLSH ,KC_4 ,KC_5 ,KC_6 ,KC_ASTR ,KC_TRNS + ,LSFT(KC_QUOT),KC_BSLS ,KC_1 ,KC_2 ,KC_3 ,KC_MINS ,KC_TRNS + ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT + ,KC_NO ,KC_NO + ,KC_NO + ,M(DeRef) ,LSFT(KC_MINS),KC_MINS ), /******* Media Layer ******************************************************************************************************* * * ,---------------------------------------------------------------. ,---------------------------------------------------------------. - * | | F11 | F12 | F13 | F14 | F15 | Esc | | | F16 | F17 | F18 | F19 | F20 | | + * | | F11 | F12 | F13 | F14 | F15 | Esc | | |||| | F16 | F17 | F18 | F19 | F20 | | * |------+---------+---------+---------+---------+----------------| |------+---------+---------+---------+---------+---------+------| * | |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll| |Scroll|PrintScrn| Home | Up | PgUp | Mail | | * |------+---------+---------+---------+---------+---------| Up | | Up |---------+---------+---------+---------+---------+------| * | | Sleep |MouseLeft|MouseDown|MouseRght|Volume Dn|------| |------| Num Lock| Left | Down | Right | MyComp | | * |------+---------+---------+---------+---------+---------|Scroll| |Scroll|---------+---------+---------+---------+---------+------| - * | | |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | | End | Down | PgDn | | | + * | | |||| |MouseDnLf|MouseDown|MouseDnRg| Mute | Down | | Down | |||| | End | Down | PgDn | |||| | | * `------+---------+---------+---------+---------+----------------' `----------------+---------+---------+---------+---------+------' - * |LCtrl| Meh | MClick | LClick | R Click| |Cmd/Insrt|Optn/Del | Hyper | Meh |RCtrl| + * | ||| | |||| | MClick | LClick | R Click| | Insert | Del | |||| | |||| | ||| | * `---------------------------------------------' `---------------------------------------------' * ,-------------. ,-------------. * | Stop |Refrsh| | Prev | Next | @@ -148,7 +157,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS ,KC_POWER ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U ,KC_TRNS ,KC_SLEP ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD ,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D -,KC_LCTL ,KC_MEH ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 +,KC_NO ,KC_NO ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 ,KC_WSTP ,KC_WREF ,KC_WSCH ,KC_WBAK ,KC_NO ,KC_WHOM @@ -157,7 +166,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_WH_U ,KC_PSCR ,KC_HOME ,KC_UP ,KC_PGUP ,KC_MAIL ,KC_TRNS ,KC_NLCK ,KC_LEFT ,KC_DOWN ,KC_RIGHT,KC_MYCM ,KC_TRNS ,KC_WH_D ,KC_NO ,KC_END ,KC_DOWN ,KC_PGDN ,KC_NO ,KC_TRNS - ,GUI_T(KC_INS),ALT_T(KC_DEL),KC_HYPR ,KC_MEH ,KC_RCTL + ,KC_INS ,KC_DEL ,KC_NO ,KC_NO ,KC_NO ,KC_MPRV ,KC_MNXT ,KC_VOLU ,KC_VOLD ,KC_MSTP ,KC_MPLY @@ -203,7 +212,49 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ) +), + +/******* Reverse Base Layer ********************************************************************************************* + * + * ,------------------------------------------------------. ,------------------------------------------------------. + * | =+ | 0 | 9 | 8 | 7 | 6 | - | | Esc | 5 | 4 | 3 | 2 | 1 | `~ | + * |------------+------+------+------+------+-------------| |------+------+------+------+------+------+------------| + * | \| | P | O | I | U | Y | ] | | [ | T | R | E | W | Q | Tab | + * |------------+------+------+------+------+------| | | |------+------+------+------+------+------------| + * | '" | ; | L | K | J | H |------| |------| G | F | D | S | A | | + * |------------+------+------+------+------+------| Tab | |Shift |------+------+------+------+------+------------| + * | Capitals | / | . | , | M | N | | | -Tab | B | V | C | X | Z | Capitals | + * `------------+------+------+------+------+-------------' `-------------+------+------+------+------+------------' + * | LCtrl | Meh |Hyper | LAlt | LGui | | RGui | RAlt | Hyper| Meh | RCtrl | + * `-----------------------------------' `-----------------------------------' + * ,-------------. ,-------------. + * | Left | Right| | Home | End | + * ,------|------|------| |------+------+------. + * | | | Up | | PgUp | | | + * |Space |Enter |------| |------|BackSp| Del | + * | | | Down | | PgDn | | | + * `--------------------' `--------------------' + */ +[RBASE] = KEYMAP( +// left hand + KC_EQL ,KC_0 ,KC_9 ,KC_8 ,KC_7 ,KC_6 ,KC_MINS +,KC_BSLS ,KC_P ,KC_O ,KC_I ,KC_U ,KC_Y ,KC_RBRC +,KC_QUOT ,LT(RBASE, KC_SCLN) ,KC_L ,KC_K ,LT(RBASE, KC_J) ,KC_H +,KC_RSFT ,KC_SLSH ,KC_DOT ,KC_COMM,KC_M ,KC_N ,KC_TAB +,KC_RCTL ,MEH_T(KC_NO),ALL_T(KC_NO),KC_RALT,KC_RGUI + ,KC_LEFT ,KC_RGHT + ,KC_UP + ,KC_SPC ,KC_ENT ,KC_DOWN + // right hand + ,KC_ESC ,KC_5 ,KC_4 ,KC_3 ,KC_2 ,KC_1 ,KC_GRV + ,KC_LBRC ,KC_T ,KC_R ,KC_E ,KC_W ,KC_Q ,KC_TAB + ,KC_G ,LT(RBASE, KC_F),KC_D ,KC_S ,LT(RBASE, KC_A) ,KC_NO + ,LSFT(KC_TAB),KC_B ,KC_V ,KC_C ,KC_X ,KC_Z ,KC_LSFT + ,KC_LGUI,KC_LALT,KC_HYPR ,KC_MEH,KC_LCTL + ,KC_HOME ,KC_END + ,KC_PGUP + ,KC_PGDN ,KC_BSPC ,KC_DEL +) }; const uint16_t PROGMEM fn_actions[] = { @@ -227,14 +278,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { switch(id) { // There are two shift keys for each layer so we increment a layer_shift var when one - // is pressed and decrement when one is released. If both are pressed at the same time - // then the layer is locked (or unlocked). The shift counts are bound between 0 and 2 + // is pressed and decrement when one is released. The shift counts are bound between 0 and 2 // only because sometimes rapid pressing led to irregular events; this way the states // are self healing during use. case LSymb: // if (record->event.pressed) { // when the LSymb button is pressed - if(++symb_shift > 2) mdia_shift = 2; // increment the symb shift count, max two + if(++symb_shift > 2) symb_shift = 2; // increment the symb shift count, max two if(spec_shift) symb_lock = !symb_lock; // if the Special layer is on, toggle the shift lock layer_on(SYMB); // in any case, turn on the Symbols layer } else { // when the LSymb button is released @@ -264,7 +314,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) case LSpec: if (record->event.pressed) { // when the LSpec button is pressed - if(symb_shift) symb_lock == !symb_lock; // if another layer button is engaged, then + if(symb_shift) symb_lock = !symb_lock; // if another layer button is engaged, then else if(mdia_shift) mdia_lock = !mdia_lock; // lock that layer, be it caps or symb or mdia else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { register_code(KC_GRV); // otherwise, if it's an uninterrupted tap, emit a char @@ -340,6 +390,30 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } break; + case NotEq: + if (record->event.pressed) { + return MACRO( I(10), D(LSFT), T(EXLM), U(LSFT), T(EQL), END ); // != + } + break; + + case GrtEq: + if (record->event.pressed) { + return MACRO( I(10), D(LSFT), T(COMM), U(LSFT), T(EQL), END ); // <= + } + break; + + case LesEq: + if (record->event.pressed) { + return MACRO( I(10), D(LSFT), T(DOT), U(LSFT), T(EQL), END ); // >= + } + break; + + case DeRef: + if (record->event.pressed) { + return MACRO( I(10), T(MINS), D(LSFT), T(DOT), U(LSFT), END ); // -> + } + break; + // mouse diagonals case MUL: // mouse up left diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png Binary files differindex 831db4f5d..18c6c4ab2 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-base.png +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-base.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt index 7763c3d37..4fc11faf9 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-base.txt @@ -7,10 +7,10 @@ [{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"], [{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Q",{x:14.5},"P",{c:"#c6c600",t:"#002299",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"], [{y:-0.375,x:3.5,c:"#cccccc",t:"#000000"},"D",{x:10.5},"K"], -[{y:-0.875,x:2.5},"S",{x:1},"F",{x:8.5},"J",{x:1},"L"], +[{y:-0.875,x:2.5},"S",{x:1,fa:[0,0,0,1]},"F\n\n\nreverse",{x:8.5},"J\n\n\nreverse",{x:1},"L"], [{y:-0.875,x:5.5},"G",{x:6.5},"H"], -[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A",{x:14.5},":\n;",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"], -[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"], +[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A\n\n\nreverse",{x:14.5},":\n;\n\nreverse",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"], +[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"], [{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"], [{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."], [{y:-0.875,x:5.5},"B",{x:6.5},"N"], diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png Binary files differindex 5ff3f5338..491f698d8 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-media.png +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt index e1467b22e..67b7840b5 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-media.txt @@ -15,10 +15,10 @@ [{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#1e8fff"},"End",{x:1},"Page\n\n\n\n\n\nDown"], [{y:-0.875,x:5.5,c:"#9977ee"},"Mute",{x:6.5,c:"#737373",a:7},""], [{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff",fa:[0,0,0,1]},"Delete\n\n\nOption"], -[{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert\n\n\nCmd",{x:1,c:"#dddd77"},"Hyper"], -[{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Crtl\n\n\nRCtrl"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee"},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], +[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff"},"Delete"], +[{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert",{x:1,c:"#737373",a:7},""], +[{y:-0.75,x:0.5},"","",{x:14.5},"",""], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee",a:4,fa:[0,0,0,1]},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"], [{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"], [{x:2},"Home\n\n\nBrowser"], [{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"], diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png Binary files differindex dd9086329..1277f7483 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.png diff --git a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt index 001bf370d..65eca9d6a 100644 --- a/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt +++ b/keyboards/ergodox/keymaps/ordinary/ordinary-symbol.txt @@ -10,18 +10,18 @@ [{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"], [{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"], [{y:-0.875,c:"#000000",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"], -[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",fa:[0,0,0,1],h:1.5},"Tab >\n\n\nTab",{x:4.5,h:1.5},"< Tab\n\n\nShift Tab"], -[{y:-0.75,x:3.5,c:"#bbddbb"},"[",{x:10.5,c:"#89b087"},"2"], +[{y:-0.625,x:6.5,c:"#bbddbb",t:"#000000",a:6,h:1.5},"'",{x:4.5,h:1.5},"\""], +[{y:-0.75,x:3.5,a:4},"[",{x:10.5,c:"#89b087"},"2"], [{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"], [{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"], [{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"], -[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5,c:"#89b087"},"."], -[{y:-0.875,x:2.5,c:"#dddd77"},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5,c:"#89b087"},"0",{x:1},"="], -[{y:-0.75,x:0.5,c:"#dddd77"},"Ctrl\n\n\nLCtrl","Meh",{x:14.5,c:"#89b087"},"+","Enter"], -[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Left","Right"], -[{h:2},"Space",{h:2},"Enter","Up"], -[{x:2},"Down"], -[{r:-30,rx:13,y:-1,x:-3},"Home","End"], -[{x:-3},"Page\n\n\n\n\n\nUp",{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete"], -[{x:-3},"Page\n\n\n\n\n\nDown"] +[{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"<",{x:10.5,c:"#89b087"},"."], +[{y:-0.875,x:2.5,c:"#bbddbb"},"*",{x:1},">",{x:8.5,c:"#89b087"},"0",{x:1},"="], +[{y:-0.75,x:0.5,c:"#bbddbb"},";","&",{x:14.5,c:"#89b087"},"+","Enter"], +[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#bbddbb"},"<=",">="], +[{a:7,h:2},"+",{h:2},"=",{c:"#737373"},""], +[{x:2,c:"#bbddbb",a:4},"!="], +[{r:-30,rx:13,y:-1,x:-3,c:"#737373",a:7},"",""], +[{x:-3},"",{c:"#bbddbb",h:2},"_",{h:2},"-"], +[{x:-3,a:4},"->"] diff --git a/keyboards/ergodox/keymaps/ordinary/readme.md b/keyboards/ergodox/keymaps/ordinary/readme.md index 820b80b45..e13cb7ec8 100644 --- a/keyboards/ergodox/keymaps/ordinary/readme.md +++ b/keyboards/ergodox/keymaps/ordinary/readme.md @@ -10,12 +10,13 @@ no rights reserved, use for any purposes, credit me if you are a nice person ## The Base Layout ## -* *White Keys* are all the normal characters and symbols in all the normal locations (except for the brackets). -* *Modifier Keys* are light yellow and in the traditional location: Control, Option, Command, plus Hyper and Meh. -* *Shift Keys* are dark yellow, found on the outsides of the keyboard. Capitals Shift (traditional shift) is found in the usual place and above that is found Symbol Shift, Media Shift, and Special Shift (Shift Lock). +* *White Keys* are all the normal characters and symbols in all the normal locations (except for the brackets, and who touch-types brackets?). +* *Modifier Keys* are light yellow and in the traditional locationn at the bottom of the keyboard: Control, Option, Command, plus Hyper and Meh. Modifier keys are only found on the base layout. +* *Shift Keys* are dark yellow, found on the outsides of the keyboard. Capitals Shift (traditional Shift) is found in the usual place and above that are Symbol Shift, Media Shift, and Special Shift (Shift Lock). * Several of the shift keys double for entry of characters which would typically be in those locations. * *Thumb Keys* shown in orange are for text navigation and manipulation. -* *Escape* is red and it is always found in that location no matter what. +* The keys under pinky fingers and index fingers will *reverse* the keyboard layout. +* *Escape* is red and it is always found in that location (*except* when the layout is reversed). ![Ordinary base layout](ordinary-base.png) @@ -23,12 +24,16 @@ The four big orange keys are arranged differently than in the default Ergodox EZ The Forward Tab and Backward Tab keys are in their locations mostly because I ended up with two extra buttons and needed something to do with them. My muscle memory from using the Truly Ergonomic Keyboard makes me look for the Tab key with my right index finger, so it is handy to have this redundant Tab, and the idea with the Backward Tab key is that it becomes easy to navigate text fields in forms, or to indent/unindent code. +#### Reversing The Base Layout #### + +The Ordinary Layout can be used to perform one-handed chorded text input. If you hold down the key under either index finger or either pinky finger (A, F, J and Semicolon), the whole base layout reverses order. Most keys are _mirrored_ but the delete keys, home/end, and left/right arrow keys are merely *translated* to preserve directionality. Pro-tip: This feature is particularly handly for bringing the Enter key to the left hand when the right hand is using the mouse. + ## The Symbols Layer ## -* *Symbols* shown in light green. All kinds of brackets are available on this layer. Ampersand and Pipe justapose each other. Pipe, slash, and backslash are arranged in a column. -* *F-Keys* are bright green and overlay the row of numerals. +* *Symbols* shown in light green. All kinds of brackets are available on this layer. Ampersand and Pipe juxtapose each other. Pipe, slash, and backslash are arranged in a column. +* *F-Keys* are bright green and overlay the row of numerals. This layer has F1-F10, higher *F-Keys* are on the Symbols layer. * *Number pad* in dark green under the right hand includes all four arithmetic operations in the same order found on most number pads and features an Enter key. The keycodes emitted here are normal numeric keycodes, not the number-pad specific keycodes emitted by most number pads so that NumLock is not needed. -* *Thumb keys* on this layer are the *reverse* of the orange keys on the base layer, with the keys either mirrored or shifted. This is powerful! Often I find myself using the mouse with my right hand, and the left hand needs to press Enter. Instead of reaching the left hand over to the right side of the keyboard, now I simply tap Symbols to reverse the turquoise keys, and Enter is right where it should be. +* The dark gray keys do nothing in case you bump them by accident. ![Ordinary symbol layout](ordinary-symbol.png) @@ -42,7 +47,7 @@ The Symbols Layer is based on the Coder Layer from the default Ergodox EZ layout * Higher-order *F-Keys* are shown in bright green overylaying the numerals. * *Application Keys* to control web browsers and audio players are dark purple but don't get too excited because these have weak support on operating systems I've looked at. Good luck. * The light purple keys are various operating system keys such as NumLock and Mute and a button to navigate to My Computer (usually your home dir). -* The dark gray keys do nothing in case you bump them by accident +* The dark gray keys do nothing in case you bump them by accident. ![Ordinary media layout](ordinary-media.png) @@ -64,27 +69,33 @@ Multiple layers can be turned on at once. The Capitals layer will affect charact The Special Shift layer is mostly used to lock the shift keys but in order to make this layout more _ordinary_ there are a few special sequences which put some keys near their most common traditional locations. -### Escape ### +#### Escape #### -The One True Location for the Escape key is segregated way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location and the nearest one is home to the tilde (er, grave) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. +The One True Location for an Escape key is separated from the rest of the keys, way up on the top left of the keyboard. The Ergodox does not have a physical button in such a location, however, and the nearest one is home to the tilde (er, *grave*) which is commonly found there. In the Ordinary layout the Escape key is found on all layers in the prominent location in the corner next to the 5, which is easy to remember, and yet it isn't natural for those of us with muscle memory flicking our wrists up and to the left looking for Escape. -The Ordinary layout offers as a consolation prize a Special sequence for Escape: Special Shift + 1. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers. +The Ordinary layout offers as a consolation prize, a Special sequence for Escape: **Special Shift + 1**. This is natural so you can tap the top left button, then the button next to it and get Escape. This gesture works in all layers. -### Backspace ### +#### Backspace #### -At the top right corner of the Ergodox EZ you can a gesture similar to the special Escape sequence using the 0 key to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. +At the top right corner of the Ergodox EZ you can do **Special Shift + 0** to produce a Backspace. Users of this keyboard and this layout are well advised to learn to use their thumbs for deleting text, but sometimes you are doing other computery things and just want to flick your digits up to the right and press backspace a bunch times. -### Other Characters ### +#### Other Characters #### The Escape and Backspace special sequences are so useful why not have a few more? You can find dash under 9, left bracket under o, and right bracket under p. That's pretty much all the characters from the top right corner of the keyboard which moved to make room for the columnar layout. +## Errata ## + +Some of the symbols on the Symbols layer are produced by the keyboard by "capitalizing" another character (such as *!* from *1*) so when you type that key you will notice the Capitals Shift red LED turn on. + **** -The Ordinary Layout for the Ergodox EZ keyboard, v4.20 +The Ordinary Layout for the Ergodox EZ keyboard, v5 Modifications from default by Nicholas Keene ergodoxez@nicholaskeene.com No rights reserved. This software is in the public domain. Credit me if you are friendly but if you're a jerk don't bother. +Keyboard layout images were created with http://www.keyboard-layout-editor.com/ by Ian Prest my thanks to that free service + Details: readme.md https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary diff --git a/keyboards/ergodox/keymaps/twey/keymap.c b/keyboards/ergodox/keymaps/twey/keymap.c index 5deacd63f..1ecbce466 100644 --- a/keyboards/ergodox/keymaps/twey/keymap.c +++ b/keyboards/ergodox/keymaps/twey/keymap.c @@ -205,6 +205,7 @@ void matrix_init_user(void) { // Runs constantly in the background, in a loop. void matrix_scan_user(void) { + __attribute__ ((unused)) uint32_t layer0 = layer_state & (1UL << 0), layer1 = layer_state & (1UL << 1), layer2 = layer_state & (1UL << 2), diff --git a/keyboards/ergodox/readme.md b/keyboards/ergodox/readme.md index 45b3354c1..5e50548be 100644 --- a/keyboards/ergodox/readme.md +++ b/keyboards/ergodox/readme.md @@ -100,7 +100,7 @@ for the left and right halves seperately. To flash them: - Install the firmware with `sudo make infinity-keymapname-dfu-util` - - Build left hand firmware with `make infinity-keymapname MASTER=right` + - Build right hand firmware with `make infinity-keymapname MASTER=right` - Plug in the right hand keyboard only. diff --git a/keyboards/gh60/keymaps/unxmaal/Makefile b/keyboards/gh60/keymaps/unxmaal/Makefile new file mode 100644 index 000000000..c73cf1141 --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/Makefile @@ -0,0 +1,112 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + diff --git a/keyboards/gh60/keymaps/unxmaal/README.md b/keyboards/gh60/keymaps/unxmaal/README.md new file mode 100644 index 000000000..52bf97ef4 --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/README.md @@ -0,0 +1,20 @@ +Unxmaal's GH60 Layout +===================== +* Mostly stolen from /u/robotmaxtron + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* Standard Mac ANSI layout +* Spacebar acts as space when tapped, Fn when held +* Menu acts as menu when tapped, Fn2 when held +* Layer1: + * Top row = `~, F1-F12, Del + * JKIL = arrow cluster +* Layer2: + * Top row = media controls + * JKIL = PgDn/Up/Home/Insert + * Backspace = Reset + +### Additional Credits +Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. diff --git a/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg b/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg Binary files differnew file mode 100644 index 000000000..4ab8cc31a --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg diff --git a/keyboards/gh60/keymaps/unxmaal/config.h b/keyboards/gh60/keymaps/unxmaal/config.h new file mode 100644 index 000000000..bb218d6fd --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/config.h @@ -0,0 +1,190 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +// Rev A +// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } +// Rev B/C +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * RGB Underglow + * These settings are for the F4 by default: + * + * + * #define ws2812_PORTREG PORTF + * #define ws2812_DDRREG DDRF + * #define ws2812_pin PF4 + * #define RGBLED_NUM 14 // Number of LEDs + * #define RGBLIGHT_HUE_STEP 10 + * #define RGBLIGHT_SAT_STEP 17 + * #define RGBLIGHT_VAL_STEP 17 + * + * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. + * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. + * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c +*/ + +/* Deprecated code below +#define ws2812_PORTREG PORTF +#define ws2812_DDRREG DDRF +#define ws2812_pin PF4 +*/ +#define RGB_DI_PIN F4 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/gh60/keymaps/unxmaal/keymap.c b/keyboards/gh60/keymaps/unxmaal/keymap.c new file mode 100644 index 000000000..7c9bd6a6d --- /dev/null +++ b/keyboards/gh60/keymaps/unxmaal/keymap.c @@ -0,0 +1,228 @@ +#include "gh60.h" +#include "action_layer.h" + +#define _BL 0 +#define _AL 1 +#define _FL 2 +#define _UL 3 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ANSI Base, Mac style + * ,-----------------------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp | + * |-----------------------------------------------------------------------------| + * |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \| + * |-----------------------------------------------------------------------------| + * |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter | + * |-----------------------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | + * |-----------------------------------------------------------------------------| + * |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl| + * `-----------------------------------------------------------------------------' + */ + [_BL] = KEYMAP( + KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \ + KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \ + KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \ + KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \ + MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL), + + /* + * Pok3r style arrow cluster + * ,-----------------------------------------------------------. + * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | + * |-----------------------------------------------------------| + * | | | | | | | | |Up| | | | | | + * |-----------------------------------------------------------| + * | | | | | | | |Left|Down|Right| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_AL] = KEYMAP( + KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), + + + /* + * Secondary function layer + * ,-------------------------------------------------------------. + * | | | | | | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset | + * |-------------------------------------------------------------| + * | | | | | | | | | |PgUp| | | | | + * |-------------------------------------------------------------| + * | | | | | | | |Home|PgDown|End| | | | + * |-------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-------------------------------------------------------------| + * | | | | | | | | | + * `-------------------------------------------------------------' + */ + [_FL] = KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), + + /* + * Locking layer for controlling the underglow. + * NOTE: currently unused. + * + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | |On|Mode| | | | | | | | | | | + * |-----------------------------------------------------------| + * | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ + [_UL] = KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), +}; + +enum function_id { + RGBLED_TOGGLE, + RGBLED_STEP_MODE, + RGBLED_INCREASE_HUE, + RGBLED_DECREASE_HUE, + RGBLED_INCREASE_SAT, + RGBLED_DECREASE_SAT, + RGBLED_INCREASE_VAL, + RGBLED_DECREASE_VAL, + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay + [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay + [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer + [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay + [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow + [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode + [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), + [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), + [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), + [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), + [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), + [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), + [12] = ACTION_FUNCTION(SHIFT_ESC), + [13] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + +// Layer LED indicators +// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster + uint32_t layer = layer_state; + if (layer & (1<<1)) { + gh60_wasd_leds_on(); + } else { + gh60_wasd_leds_off(); + } + + if (layer & (1<<2)) { + gh60_esc_led_on(); + } else { + gh60_esc_led_off(); + } +}; + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case RGBLED_TOGGLE: + //led operations + if (record->event.pressed) { + rgblight_toggle(); + } + break; + case RGBLED_INCREASE_HUE: + if (record->event.pressed) { + rgblight_increase_hue(); + } + break; + case RGBLED_DECREASE_HUE: + if (record->event.pressed) { + rgblight_decrease_hue(); + } + break; + case RGBLED_INCREASE_SAT: + if (record->event.pressed) { + rgblight_increase_sat(); + } + break; + case RGBLED_DECREASE_SAT: + if (record->event.pressed) { + rgblight_decrease_sat(); + } + break; + case RGBLED_INCREASE_VAL: + if (record->event.pressed) { + rgblight_increase_val(); + } + break; + case RGBLED_DECREASE_VAL: + if (record->event.pressed) { + rgblight_decrease_val(); + } + break; + case RGBLED_STEP_MODE: + if (record->event.pressed) { + rgblight_step(); + } + break; + static uint8_t shift_esc_shift_mask; + // Shift + ESC = ~ + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +}; diff --git a/keyboards/gonnerd/keymaps/default/keymap.c b/keyboards/gonnerd/keymaps/default/keymap.c index a37005939..d74f949dc 100644 --- a/keyboards/gonnerd/keymaps/default/keymap.c +++ b/keyboards/gonnerd/keymaps/default/keymap.c @@ -1,14 +1,24 @@ #include "gonnerd.h" -// Keymap layers +#define __x__ KC_NO +// Keymap layers const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP_60( /* Base */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ - KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NO, KC_ENT, \ - KC_LSFT,KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \ - KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(1), KC_RCTL), + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \ + KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL \ + ), + + [1] = KEYMAP_60( /* System layer to have access to RESET button */ + RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + __x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \ + ), }; const uint16_t PROGMEM fn_actions[] = { diff --git a/keyboards/gonnerd/keymaps/mauin/keymap.c b/keyboards/gonnerd/keymaps/mauin/keymap.c index 1a1d515a9..5979a7ca4 100644 --- a/keyboards/gonnerd/keymaps/mauin/keymap.c +++ b/keyboards/gonnerd/keymaps/mauin/keymap.c @@ -23,11 +23,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [BASE_LAYER] = KEYMAP_60( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \ - KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(3), KC_RCTL \ + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \ + KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(2), KC_RCTL \ ), /* Layer 1: Function Layer @@ -45,10 +45,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [FUNCTION_LAYER] = KEYMAP_60( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - __x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \ - KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \ - KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \ + __x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \ + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \ + KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \ ), /* Layer 2: System Layer @@ -69,10 +69,40 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ - __x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \ + __x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \ ), }; -const uint16_t PROGMEM fn_actions[] = { +enum function_id { + ESC_GRV, // Makes Esc behave like `~ when pressed with the left GUI modifier. This is the "switch between windows of the same application" key combination in macOS +}; +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(ESC_GRV), }; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t esc_grv_mask; + switch (id) { + case ESC_GRV: + esc_grv_mask = get_mods() & MOD_BIT(KC_LGUI); + if (record->event.pressed) { + if (esc_grv_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (esc_grv_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/gonnerd/readme.md b/keyboards/gonnerd/readme.md index 1224ff6b0..807df308a 100644 --- a/keyboards/gonnerd/readme.md +++ b/keyboards/gonnerd/readme.md @@ -11,6 +11,10 @@ It is possible to change the bootloader of the GON NerD with an ISP programmer. _After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will not work anymore. You will lose your warranty and official support from GON!_ +## Reset button + +To run the `make dfu` command to flash keymaps onto the board, you need to put the board into DFU mode. As the GON NerD PCBs do not have a reset button on the board to put it into DFU mode, be sure to include a `RESET` button on your keymap. Otherwise you'll have to unscrew your keyboard from the case and short the GND and RST pins. + ## Building Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. diff --git a/keyboards/handwired/magicforce68/Makefile b/keyboards/handwired/magicforce68/Makefile new file mode 100644 index 000000000..191c6bb66 --- /dev/null +++ b/keyboards/handwired/magicforce68/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/magicforce68/README.md b/keyboards/handwired/magicforce68/README.md new file mode 100644 index 000000000..4f0ccecf9 --- /dev/null +++ b/keyboards/handwired/magicforce68/README.md @@ -0,0 +1,20 @@ +Magicforce 68 Handwired +======================= + +This firmware is for a Magicforce 68 that's had its PCB removed and is handwired with an Arduino Micro. NOTE: The Arduino Micro is different than the Arduino *Pro* Micro. + +## Wiring Layout + +![Wiring Layout](wiring-layout.png) + +## Pinout + +The following pins are used: +- Columns 1-15: B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 +- Rows 1-5: F0, F1, F4, F5, F6 + +## Compiling and loading the firmware + +To build the firmware, run `make`. + +To flash the firemware onto the microcontroller, run `make avrdude`, and press the reset button. diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h new file mode 100644 index 000000000..1e2b7d3e7 --- /dev/null +++ b/keyboards/handwired/magicforce68/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hexwire +#define PRODUCT Magicforce 68 +#define DESCRIPTION Handwired Magicforce 68 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS { B2, B0, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B7, D6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/magicforce68/keymaps/default/keymap.c b/keyboards/handwired/magicforce68/keymaps/default/keymap.c new file mode 100644 index 000000000..22553f714 --- /dev/null +++ b/keyboards/handwired/magicforce68/keymaps/default/keymap.c @@ -0,0 +1,67 @@ +#include "magicforce68.h" + +#define _QWERTY 0 +#define _FN1 1 +#define _FN2 2 +#define KC_ KC_TRNS +#define KC_X0 LT(_FN2, KC_GRV) +#define KC_X1 MO(_FN1) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = KEYMAP( + /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ + ESC , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , INS ,PGUP, + /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| |----`----| */ + TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , DEL ,PGDN, + /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| `----`----' */ + X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER , + /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| ,----. */ + LSFT , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSFT , UP , + /*|---------`----`----`----`----`----`----`----`----`----`----`-------------.--|----|----. */ + LCTL ,LGUI ,LALT , SPACE , X1 ,RALT ,RCTL , LEFT,DOWN,RGHT + /*`-----+-----+-----+------------------------------+------+-----+-----' `----+----+----' */ + ), + + [_FN1] = KEYMAP( + /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ + GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME, + /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ + , , , UP , , , , , , , , , , , VOLD,END, + /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ + , ,LEFT,DOWN,RGHT, , , , , , , , , + /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ + , , , , , , ,MUTE, , , , , MUTE, + /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ + , , , , , , , MPRV,MPLY,MNXT + /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ + ), + + [_FN2] = KEYMAP( + /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. ,----+----. */ + GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , VOLU,HOME, + /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| |ins-`pgup| */ + , , , UP , , , , 7 , 8 , 9 , , , , , VOLD,END, + /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| `del-`pgdn' */ + , ,LEFT,DOWN,RGHT, , , 4 , 5 , 6 , , , , + /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| ,----. */ + , , , , , , 0 , 1 , 2 , 3 , , , MUTE, + /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-.--|-up-|----. */ + , , , , , , , MPRV,MPLY,MNXT + /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' `left+down+rght' */ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/handwired/magicforce68/magicforce68.c b/keyboards/handwired/magicforce68/magicforce68.c new file mode 100644 index 000000000..84b1007e2 --- /dev/null +++ b/keyboards/handwired/magicforce68/magicforce68.c @@ -0,0 +1,8 @@ +#include "magicforce68.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/magicforce68/magicforce68.h b/keyboards/handwired/magicforce68/magicforce68.h new file mode 100644 index 000000000..cfcdce38d --- /dev/null +++ b/keyboards/handwired/magicforce68/magicforce68.h @@ -0,0 +1,20 @@ +#ifndef MAGICFORCE68_H +#define MAGICFORCE68_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K2E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K3E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \ + ) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk new file mode 100644 index 000000000..e897ef252 --- /dev/null +++ b/keyboards/handwired/magicforce68/rules.mk @@ -0,0 +1,83 @@ + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/handwired/magicforce68/wiring-layout.png b/keyboards/handwired/magicforce68/wiring-layout.png Binary files differnew file mode 100644 index 000000000..816b10b2b --- /dev/null +++ b/keyboards/handwired/magicforce68/wiring-layout.png diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index fd45c2bfe..24f02993f 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -152,6 +152,110 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +#define PS2_INIT_DELAY 2000 +#define BATTERY_PIN 9 +#define BATTERY_POLL 30000 +#define MAX_VOLTAGE 4.2 +#define MIN_VOLTAGE 3.2 + +#define KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \ +) \ +{ \ + {k11, k12, k13, k14, k15, k16}, \ + {k21, k22, k23, k24, k25, k26}, \ + {k31, k32, k33, k34, k35, k36}, \ + {k41, k42, k43, k44, k45, k46}, \ + {k17, k18, k19, k1a, k1b, k1c}, \ + {k27, k28, k29, k2a, k2b, k2c}, \ + {k37, k38, k39, k3a, k3b, k3c}, \ + {k47, k48, k49, k4a, k4b, k4c} \ +} + +#ifndef __ASSEMBLER__ // assembler doesn't like enum in .h file +enum led_sequence { + LED_IND_BLUETOOTH, + LED_IND_USB, + LED_IND_BATTERY, + + LED_IND_FUN, + LED_IND_NUM, + LED_IND_EMOJI, + + LED_BKSP, + LED_ENT, + LED_RSFT, + LED_RCTL, + + LED_RGUI, + LED_SLSH, + LED_SCLN, + LED_P, + + LED_O, + LED_L, + LED_DOT, + LED_RALT, + + LED_EMOJI, + LED_COMM, + LED_K, + LED_I, + + LED_U, + LED_J, + LED_M, + LED_FUN, + + LED_RSPC, + LED_N, + LED_HH, + LED_Y, + + LED_TRACKPOINT3, + LED_TRACKPOINT2, + LED_TRACKPOINT1, + + LED_LSPC, + LED_B, + LED_G, + LED_T, + + LED_R, + LED_F, + LED_V, + LED_NUM, + + LED_PUNC, + LED_C, + LED_D, + LED_E, + + LED_W, + LED_S, + LED_X, + LED_LALT, + + LED_LGUI, + LED_Z, + LED_A, + LED_Q, + + LED_TAB, + LED_ESC, + LED_LSFT, + LED_LCTL, + + LED_TOTAL +}; + +#define RGB_DI_PIN B5 +#define RGBSPS_NUM LED_TOTAL +#endif + /* PS/2 mouse */ #ifdef PS2_USE_BUSYWAIT # define PS2_CLOCK_PORT PORTD diff --git a/keyboards/handwired/promethium/keymaps/priyadi/README.md b/keyboards/handwired/promethium/keymaps/priyadi/README.md new file mode 100644 index 000000000..ddeaed939 --- /dev/null +++ b/keyboards/handwired/promethium/keymaps/priyadi/README.md @@ -0,0 +1,44 @@ +Priyadi Keymap for Planck-like Keyboards +======================================== + +Main layer modifications from default Planck layout: + +* Enter moved to quotes position +* Quotes moved to semicolon position. +* QWERTZ style colon & semicolon. shift-. = : shift-, = ; This is done in hardware, no layout switching needed in software. +* < & > occupied precious real estate, and so they are moved down to punctuation layer. +* Right-shift on Enter position. +* Removed arrow keys, they are on another layer now. +* Put Ctrl-Alt-Super and Super-AltGr-Ctrl in left & right corners. +* Lower & Raise is now called Num and Fun. +* OS & Left keys become another thumb modifier: Empty & Greek (Empty because I used this for another use and my muscle memory is not adapted to it yet) + +On Promethium, Trackpoint is enabled on PD2 and PD3. We impersonate a Thinkpad keyboard to be able to use Thinkpad driver on Windows (still needs verification). + +AltGr & Compose dual use key. Tap for Compose (mapped to Scroll Lock in hardware) and press for AltGr. + +Supported layouts: QWERTY, DVORAK, Colemak, Workman, Norman. Switchable from SYS layer. In DVORAK, semicolon is replaced by /? key. + +Num activates NUM layer: hexkeypad on the right side and most punctuation on the left side. Hexkeypad is optimized for C-style hex, IPv6, HTML RGB triplets, etc. + +Fun activates FUN layer: arrow cluster on right home row, F-numbers on left side. + +Pressing Num+Fun activates PUNC layer: same punctuations as NUM layer on the left side, parens on the right side. + +Greek activates either GREEKU or GREEKL layer, depending whether shift is pressed or not. Shift state changes are also taken into account when the layer is active. + +Greek+Empty activates EMOJI layer. The whole keyboard now outputs emojis! + +Pressing both spacebars (spacekeys, actually) activates GUI layer. QWERTYUIOP switches to a virtual desktop. J & L switches virtual desktop to the left or right. S & F behaves like Alt-Tab and Alt-Shift-Tab. This works by sending Alt press when entering the layer, and Alt release when other than S or F keys are pressed. + +Pressing both Ctrls activates SYS layer for configuring the keyboard. + +On Promethium, USB or Bluetooth output is detected on startup. If USB is connected, then USB is used initially. SYS-U and SYS-B switch output to USB or Bluetooth at runtime. Current active output is indicated with LEDs. + +SYS-W, SYS-L, SYS-M switch Unicode input method. SYS-Q, SYS-D, SYS-C, SYS-K, SYS-N switch to QWERTY, DVORAK, Colemak, Workman and Norman, respectively. + +On Planck, SYS-A (mnemonic: audio) toggles faux clicky: use buzzer to emit clicks on key presses and releases. + +On Promethium there are 6 indicator LEDs, and under switch LEDs on each switches, including Trackpoint buttons. Totaling 57 LEDs. Output is limited to 0xF for each LEDs to conserve power. SYS-G (mnemonic: glow) toggles various backlighting modes. + +On Promethium, there's a LED to indicate battery level. Hue indicates level: green is full, red is empty.
\ No newline at end of file diff --git a/keyboards/handwired/promethium/keymaps/priyadi/config.h b/keyboards/handwired/promethium/keymaps/priyadi/config.h index 53059ca7d..3f5dd5817 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/config.h +++ b/keyboards/handwired/promethium/keymaps/priyadi/config.h @@ -3,6 +3,8 @@ #include "../../config.h" +#define PRIYADI_PROMETHIUM + /* bootmagic salt key */ #define BOOTMAGIC_KEY_SALT KC_ESC @@ -11,8 +13,9 @@ #define PREVENT_STUCK_MODIFIERS -#define RGB_DI_PIN B5 -#define RGBSPS_NUM 57 +#define RGBSPS_ENABLE + +#define UNICODE_TYPE_DELAY 0 #define LAYOUT_DVORAK #define LAYOUT_COLEMAK @@ -20,5 +23,6 @@ #define LAYOUT_WORKMAN #define DOUBLESPACE_LAYER_ENABLE +// #define TOLELOT_ENABLE #endif diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index 1ad34612e..cf7c67339 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -1,14 +1,44 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. +/* +Copyright 2017 Priyadi Iman Nurcahyo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#if defined(PRIYADI_PROMETHIUM) + #include "promethium.h" +#elif defined(PRIYADI_PLANCK) + #include "planck.h" +#else + #error "no keyboard defined" +#endif -#include "promethium.h" #include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" + #include "musical_notes.h" +#endif #include "eeconfig.h" #include "process_unicode.h" #include "quantum.h" +#ifdef RGBSPS_ENABLE #include "rgbsps.h" +#endif +#ifdef PS2_MOUSE_ENABLE #include "ps2_mouse.h" #include "ps2.h" +#endif +#ifdef FAUXCLICKY_ENABLE +#include "fauxclicky.h" +#endif #include "outputselect.h" #include "led.h" #define COUNT(x) (sizeof (x) / sizeof (*(x))) @@ -21,8 +51,10 @@ #define KC_WWWF KC_WWW_FORWARD // hybrid right-alt & scroll lock (mapped to Compose in OS) -#undef KC_RALT -#define KC_RALT MT(MOD_RALT, KC_SLCK) +#define C_RALT MT(MOD_RALT, KC_SLCK) + +// dual use right-shift & del key +// #define C_RSFT MT(MOD_RSFT, KC_DEL) bool capslock = false; #ifdef DOUBLESPACE_LAYER_ENABLE @@ -41,25 +73,29 @@ enum glow_modes { }; uint8_t glow_mode = GLOW_MIN; +void turn_off_capslock(void); extern keymap_config_t keymap_config; +// layers, ordering is important! enum layers { _QWERTY, _DVORAK, _COLEMAK, _WORKMAN, _NORMAN, - - _PUNC, - _NUM, - _FUNC, + _DEFAULT_LAYER_MAX = _NORMAN, _GREEKU, _GREEKL, + _NUM, + _FUN, + _PUNC, + + _EMPTY, _EMOJI, _GUI, - _SYS, + _SYS }; // double-space layer @@ -74,9 +110,6 @@ enum planck_keycodes { NORMAN, // layer switchers - PUNC, - NUM, - FUNC, EMOJI, GUI, GREEK, @@ -90,9 +123,22 @@ enum planck_keycodes { LSPACE, RSPACE, GLOW, - AUDIO + + // stub +#ifndef FAUXCLICKY_ENABLE + FC_TOG, +#endif +#ifndef ADAFRUIT_BLE_ENABLE + OUT_BLE, +#endif + KEYCODE_END }; +#define EMPTY MO(_EMPTY) +#define NUM MO(_NUM) +#define FUN MO(_FUN) +#define FUN0 LT(_FUN, KC_0) + // unicode map enum unicode_name { @@ -196,6 +242,11 @@ enum unicode_name { LOMEG, FSIGM, + + LTEQ, + GTEQ, + NOTEQ, + PLMIN, }; const uint32_t PROGMEM unicode_map[] = { @@ -297,10 +348,17 @@ const uint32_t PROGMEM unicode_map[] = { [LPSI] = 0x03C8, [LOMEG] = 0x03C9, [FSIGM] = 0x03C2, + + // other + [LTEQ] = 0x2264, // less than or equal + [GTEQ] = 0x2265, // greater than or equal + [NOTEQ] = 0x2260, // not equal + [PLMIN] = 0xB1, // plus minus }; // RGBSPS +#ifdef RGBSPS_ENABLE const uint8_t PROGMEM LED_ALNUM[] = { LED_Z, LED_A, @@ -365,14 +423,14 @@ const uint8_t PROGMEM LED_MODS[] = { const uint8_t PROGMEM LED_FN[] = { LED_PUNC, LED_NUM, - LED_FUNC, + LED_FUN, LED_EMOJI }; const uint8_t PROGMEM LED_INDICATORS[] = { LED_IND_EMOJI, LED_IND_NUM, - LED_IND_FUNC, + LED_IND_FUN, LED_IND_BATTERY, LED_IND_USB, LED_IND_BLUETOOTH, @@ -431,7 +489,7 @@ void led_reset(void) { void led_set_layer_indicator(void) { static uint8_t oldlayer = 255; - rgbsps_set(LED_IND_FUNC, 0, 0, 0); + rgbsps_set(LED_IND_FUN, 0, 0, 0); // rgbsps_set(LED_IND_NUM, 0, 0, 0); rgbsps_set(LED_IND_EMOJI, 0, 0, 0); @@ -444,14 +502,14 @@ void led_set_layer_indicator(void) { oldlayer = layer; - if (layer <= _NORMAN) { + if (layer <= _DEFAULT_LAYER_MAX) { rgbsps_send(); return; } switch(layer) { - case _FUNC: - rgbsps_set(LED_IND_FUNC, 15, 0, 0); + case _FUN: + rgbsps_set(LED_IND_FUN, 15, 0, 0); break; // case _NUM: // rgbsps_set(LED_IND_NUM, 0, 0, 15); @@ -460,8 +518,8 @@ void led_set_layer_indicator(void) { rgbsps_set(LED_IND_EMOJI, 15, 15, 0); break; default: - rgbsps_set(LED_IND_FUNC, 3, 3, 3); - rgbsps_set(LED_IND_NUM, 3, 3, 3); + rgbsps_set(LED_IND_FUN, 3, 3, 3); + // rgbsps_set(LED_IND_NUM, 3, 3, 3); rgbsps_set(LED_IND_EMOJI, 3, 3, 3); } @@ -495,7 +553,7 @@ void led_init(void) { rgbsps_set(LED_TRACKPOINT2, 0, 0, 15); rgbsps_set(LED_TRACKPOINT3, 15, 0, 0); } - +#endif // RGBSPS_ENABLE // keymaps @@ -509,14 +567,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Alt | GUI | Punc | Num | Space | Func |Greek | GUI |AltGr | Ctrl | + * | Ctrl | Alt | GUI | Punc | Num | Space | Fun |Greek | GUI |AltGr | Ctrl | * `-----------------------------------------------------------------------------------' */ [_QWERTY] = KEYMAP( KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT , KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LALT, KC_LGUI, PUNC, NUM, LSPACE, RSPACE, FUNC, GREEK, KC_RGUI, KC_RALT, KC_RCTL + KC_LCTL, KC_LALT, KC_LGUI, EMPTY, NUM, LSPACE, RSPACE, FUN, GREEK, KC_RGUI, C_RALT, KC_RCTL ), /* Dvorak @@ -604,56 +662,56 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Punc * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | ` | + * | ~ | ! | @ | # | $ | % | ^ | & | * | ≤ | ≥ | ` | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | * | \ | - | = | / | | ( | ) | < | > | | + * | | * | \ | - | = | / | ≠ | ( | ) | < | > | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | & | ^ | | | _ | + | ? | | [ | ] | { | } | : | + * | & | ^ | | | _ | + | ? | ± | [ | ] | { | } | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | + * | | | | | | | | | | : | | * `-----------------------------------------------------------------------------------' */ [_PUNC] = KEYMAP( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_GRV , - XXXXXXX, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, XXXXXXX, KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, XXXXXXX, - KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, XXXXXXX, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, KC_COLN, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, X(LTEQ), X(GTEQ), _______, + KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, X(NOTEQ),KC_LPRN, KC_RPRN, KC_LABK, KC_RABK, _______, + KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, X(PLMIN),KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, _______ ), /* Num * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | A | 7 | 8 | 9 | D | ` | + * | ~ | ! | @ | # | $ | % | A | 7 | 8 | 9 | D | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | * | \ | - | = | / | B | 4 | 5 | 6 | E | | + * | ` | * | \ | - | = | / | B | 4 | 5 | 6 | E | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | & | ^ | | | _ | + | ? | C | 1 | 2 | 3 | F | : | + * | & | ^ | | | _ | + | ? | C | 1 | 2 | 3 | F | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | x | 0 | , | . | | | + * | | | x | | | | | 0 | , | . | : | | * `-----------------------------------------------------------------------------------' */ [_NUM] = KEYMAP( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, S(KC_A), KC_7, KC_8, KC_9, S(KC_D), KC_GRV, - XXXXXXX, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, S(KC_B), KC_4, KC_5, KC_6, S(KC_E), _______, - KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, S(KC_C), KC_1, KC_2, KC_3, S(KC_F), KC_COLN, - _______, _______, _______, _______, _______, _______, _______, KC_0, KC_COMM, KC_DOT, KC_X, _______ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, S(KC_A), KC_7, KC_8, KC_9, S(KC_D), _______, + KC_GRV, KC_ASTR, KC_BSLS, KC_MINS, KC_EQL, KC_SLSH, S(KC_B), KC_4, KC_5, KC_6, S(KC_E), _______, + KC_AMPR, KC_CIRC, KC_PIPE, KC_UNDS, KC_PLUS, KC_QUES, S(KC_C), KC_1, KC_2, KC_3, S(KC_F), _______, + _______, _______, KC_X, _______, _______, _______, _______, FUN0 , KC_COMM, KC_DOT, KC_COLN, _______ ), /* Func * ,-----------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | | | PgUp | Up | PgDn | PgUp | Del | + * | | F1 | F2 | F3 | F4 | Ins | | PgUp | Up | PgDn | PgUp | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | Ins | + * | Caps | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F9 | F10 | F11 | F12 | | | | Home | End | | | + * | | F9 | F10 | F11 | F12 |Pause | | | Home | End | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_FUNC] = KEYMAP( - XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL, - XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8,KC_PSCREEN,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_INS, - _______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +[_FUN] = KEYMAP( + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_INS, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL, + KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, KC_PSCR, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, + _______, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Uppercase Greek @@ -668,9 +726,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_GREEKU] = KEYMAP( - _______, _______, _______,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______, - _______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), _______, _______, - _______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), _______, _______, _______, _______, + _______, XXXXXXX, XXXXXXX,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______, + _______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), KC_QUOT, _______, + _______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), KC_COMM, KC_DOT, KC_SLSH, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -686,9 +744,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_GREEKL] = KEYMAP( - _______, _______,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______, - _______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), _______, _______, - _______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), _______, _______, _______, _______, + _______, XXXXXXX,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______, + _______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), KC_QUOT, _______, + _______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), KC_COMM, KC_DOT, KC_SLSH, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Empty + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_EMPTY] = KEYMAP( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -707,14 +783,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW), X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS), X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH), - X(POO), X(EYES), _______,X(HUNRD), X(SKULL),X(HORNS), X(HALO), X(FEAR),X(YUMMY),_______,X(DISAP),X(NOEVK) + X(POO), X(EYES), X(HUNRD),_______, X(SKULL),X(HORNS), X(HALO), X(FEAR),_______,X(YUMMY),X(DISAP),X(NOEVK) ), /* GUI * ,-----------------------------------------------------------------------------------. * | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | Vol- | Mute | Vol+ | | | Prev | | Next | | | + * | Esc | | Btab | Esc | Tab | | | Prev | | Next | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | Prev | Play | Next | | | | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -723,9 +799,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_GUI] = KEYMAP( XXXXXXX, G(KC_1), G(KC_2), G(KC_3), G(KC_4), G(KC_5), G(KC_6), G(KC_7), G(KC_8), G(KC_9), G(KC_0), XXXXXXX, - XXXXXXX, XXXXXXX, KC_VOLD, KC_MUTE, KC_VOLU, XXXXXXX, XXXXXXX, KC_WWWB, XXXXXXX, KC_WWWF, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, KC_SPC, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX + KC_ESC, XXXXXXX, S(KC_TAB),KC_ESC, KC_TAB, XXXXXXX, XXXXXXX, KC_WWWB, XXXXXXX, KC_WWWF, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, KC_VOLD, KC_MUTE, KC_VOLU, KC_SPC, KC_SPC, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ), /* Sys @@ -741,11 +817,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_SYS] = KEYMAP( XXXXXXX, QWERTY, WIN, XXXXXXX, RESET, XXXXXXX, XXXXXXX, OUT_USB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, AUDIO, XXXXXXX, DVORAK, XXXXXXX, GLOW, XXXXXXX, XXXXXXX, WORKMAN, LINUX, XXXXXXX, XXXXXXX, + XXXXXXX, FC_TOG, XXXXXXX, DVORAK, XXXXXXX, GLOW, XXXXXXX, XXXXXXX, WORKMAN, LINUX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, OUT_BLE, NORMAN, OSX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______ ), + }; void persistant_default_layer_set(uint16_t default_layer) { @@ -753,9 +830,63 @@ void persistant_default_layer_set(uint16_t default_layer) { default_layer_set(default_layer); } +#ifdef DOUBLESPACE_LAYER_ENABLE +void process_doublespace(bool pressed, bool *isactive, bool *otheractive, bool *isemitted) { + if (pressed) { + *isactive = true; + if (*otheractive) { + layer_on(_SPACE); + register_code(KC_LALT); // sends alt and enter layer + space_layer_entered = true; + } + } else { + *isactive = false; + if (space_layer_entered) { + unregister_code(KC_LALT); // release alt and exit layer + layer_off(_SPACE); + if (!*otheractive) { + space_layer_entered = false; + } + } else { + if (!*isemitted) { + register_code(KC_SPC); + unregister_code(KC_SPC); + } + *isemitted = false; + } + } +} +#endif + +uint32_t layer_state_set_kb(uint32_t state) +{ + // turn on punc layer if both fun & num are on + if ((state & ((1UL<<_NUM) | (1UL<<_FUN))) == ((1UL<<_NUM) | (1UL<<_FUN))) { + state |= (1UL<<_PUNC); + } else { + state &= ~(1UL<<_PUNC); + } + + // turn on emoji layer if empty and greek layer are on + if ( + (state & ((1UL<<_EMPTY) | (1UL<<_GREEKU))) == ((1UL<<_EMPTY) | (1UL<<_GREEKU)) + || (state & ((1UL<<_EMPTY) | (1UL<<_GREEKL))) == ((1UL<<_EMPTY) | (1UL<<_GREEKL)) + ) { + state |= (1UL<<_EMOJI); + } else { + state &= ~(1UL<<_EMOJI); + } + return state; +} + bool process_record_user(uint16_t keycode, keyrecord_t *record) { - bool lshift = keyboard_report->mods & MOD_BIT(KC_LSFT); - bool rshift = keyboard_report->mods & MOD_BIT(KC_RSFT); + static bool lshift = false; + static bool rshift = false; + static uint8_t layer = 0; + + lshift = keyboard_report->mods & MOD_BIT(KC_LSFT); + rshift = keyboard_report->mods & MOD_BIT(KC_RSFT); + layer = biton32(layer_state); #ifdef DOUBLESPACE_LAYER_ENABLE // double-space: send space immediately if any other key depressed before space is released @@ -779,6 +910,14 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { rspace_emitted = true; } } + + if (layer == _SPACE && keycode != S(KC_TAB) && keycode != KC_TAB && keycode != KC_ESC && keycode != XXXXXXX) { + if (record->event.pressed) { + unregister_code(KC_LALT); + } else { + register_code(KC_LALT); + } + } #endif switch (keycode) { @@ -786,61 +925,19 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef DOUBLESPACE_LAYER_ENABLE // double-space enter space layer case LSPACE: - if (record->event.pressed) { - lspace_active = true; - if (rspace_active) { - layer_on(_SPACE); - space_layer_entered = true; - } - } else { - lspace_active = false; - if (space_layer_entered) { - layer_off(_SPACE); - if (!rspace_active) { - space_layer_entered = false; - } - } else { - if (!lspace_emitted) { - register_code(KC_SPC); - unregister_code(KC_SPC); - } - lspace_emitted = false; - } - } + process_doublespace(record->event.pressed, &lspace_active, &rspace_active, &lspace_emitted); return false; break; case RSPACE: - if (record->event.pressed) { - rspace_active = true; - if (lspace_active) { - layer_on(_SPACE); - space_layer_entered = true; - } - } else { - rspace_active = false; - if (space_layer_entered) { - layer_off(_SPACE); - if (!lspace_active) { - space_layer_entered = false; - } - } else { - if (!rspace_emitted) { - register_code(KC_SPC); - unregister_code(KC_SPC); - } - rspace_emitted = false; - } - } + process_doublespace(record->event.pressed, &rspace_active, &lspace_active, &rspace_emitted); return false; break; #endif // handle greek layer shift - // handle both shift = capslock case KC_LSFT: case KC_RSFT: ; - uint8_t layer = biton32(layer_state); if (layer == _GREEKU || layer == _GREEKL) { if (record->event.pressed) { layer_on(_GREEKU); @@ -851,13 +948,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_off(_GREEKU); } } - } else { - if (record->event.pressed) { - if (lshift ^ rshift) { // if only one shift was pressed - register_code(KC_CAPS); - unregister_code(KC_CAPS); - } - } } return true; break; @@ -948,18 +1038,21 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; #endif - // layer switcher - case PUNC: - if (record->event.pressed) { - layer_on(_PUNC); - update_tri_layer(_PUNC, _GREEKL, _EMOJI); - } else { - layer_off(_PUNC); - update_tri_layer(_PUNC, _GREEKL, _EMOJI); + // only process Fnumber on key release, and only when layer switcher is still pressed. + // this is to avoid accidental presses on potentially destructive keys + case KC_F1 ... KC_F12: + case KC_PAUS: + case KC_PSCR: + case KC_INS: + if (!record->event.pressed && layer == _FUN) { // key released and still in FUN layer + register_code(keycode); + unregister_code(keycode); } return false; break; + // layer switcher + // case GREEK: if (record->event.pressed) { if (lshift || rshift) { @@ -968,31 +1061,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else { layer_on(_GREEKL); layer_off(_GREEKU); - update_tri_layer(_PUNC, _GREEKL, _EMOJI); } } else { layer_off(_GREEKU); layer_off(_GREEKL); - update_tri_layer(_PUNC, _GREEKL, _EMOJI); - } - return false; - break; - - case NUM: - if (record->event.pressed) { - turn_off_capslock(); - layer_on(_NUM); - } else { - layer_off(_NUM); - } - return false; - break; - - case FUNC: - if (record->event.pressed) { - layer_on(_FUNC); - } else { - layer_off(_FUNC); } return false; break; @@ -1012,6 +1084,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; // glow mode changer +#ifdef RGBSPS_ENABLE case GLOW: if (record->event.pressed) { glow_mode++; @@ -1023,16 +1096,20 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; +#endif - // faux clicky toggle, TBD - case AUDIO: - return false; + // faux clicky indicator +#ifdef FAUXCLICKY_ENABLE + case FC_TOG: + return true; break; +#endif } return true; } void set_output_user(uint8_t output) { +#ifdef ADAFRUIT_BLE_ENABLE switch(output) { case OUTPUT_USB: led_set_output_usb(); @@ -1043,82 +1120,92 @@ void set_output_user(uint8_t output) { default: led_set_output_none(); } +#endif } -void matrix_init_user(void) { +void matrix_init_user() { _delay_ms(500); // give time for usb to initialize set_unicode_input_mode(UC_LNX); + +#ifdef RGBSPS_ENABLE led_init(); +#endif // auto detect output on init +#ifdef ADAFRUIT_BLE_ENABLE uint8_t output = auto_detect_output(); if (output == OUTPUT_USB) { set_output(OUTPUT_USB); } else { set_output(OUTPUT_ADAFRUIT_BLE); } +#endif } -void matrix_scan_user(void) { - led_set_layer_indicator(); +void turn_off_capslock() { + if (capslock) { + register_code(KC_CAPS); + unregister_code(KC_CAPS); + } } -void battery_poll(uint8_t level) { - rgbsps_sethsv(LED_IND_BATTERY, level * 120/255, 255, 15); - rgbsps_send(); -} +#ifdef RGBSPS_ENABLE + void matrix_scan_user(void) { + led_set_layer_indicator(); + } -void led_set_user(uint8_t usb_led) { - bool new_capslock = usb_led & (1<<USB_LED_CAPS_LOCK); - if (new_capslock ^ capslock) { // capslock state is different - if (capslock = new_capslock) { - rgbsps_set(LED_IND_NUM, 15, 0, 0); - } else { - rgbsps_set(LED_IND_NUM, 0, 0, 0); - } + void battery_poll(uint8_t level) { + rgbsps_sethsv(LED_IND_BATTERY, level * 120/255, 255, 15); rgbsps_send(); } -} -void turn_off_capslock() { - if (capslock) { - register_code(KC_CAPS); - unregister_code(KC_CAPS); + void led_set_user(uint8_t usb_led) { + bool new_capslock = usb_led & (1<<USB_LED_CAPS_LOCK); + if (new_capslock ^ capslock) { // capslock state is different + if ((capslock = new_capslock)) { + rgbsps_set(LED_IND_NUM, 15, 0, 0); + } else { + rgbsps_set(LED_IND_NUM, 0, 0, 0); + } + rgbsps_send(); + } } -} +#endif -void ps2_mouse_init_user() { - uint8_t rcv; - - // set TrackPoint sensitivity - PS2_MOUSE_SEND(0xE2, "tpsens: 0xE2"); - PS2_MOUSE_SEND(0x81, "tpsens: 0x81"); - PS2_MOUSE_SEND(0x4A, "tpsens: 0x4A"); - PS2_MOUSE_SEND(0x49, "tpsens: 0x59"); - - // set TrackPoint Negative Inertia factor - PS2_MOUSE_SEND(0xE2, "tpnegin: 0xE2"); - PS2_MOUSE_SEND(0x81, "tpnegin: 0x81"); - PS2_MOUSE_SEND(0x4D, "tpnegin: 0x4D"); - PS2_MOUSE_SEND(0x06, "tpnegin: 0x06"); - - // set TrackPoint speed - // (transfer function upper plateau speed) - PS2_MOUSE_SEND(0xE2, "tpsp: 0xE2"); - PS2_MOUSE_SEND(0x81, "tpsp: 0x81"); - PS2_MOUSE_SEND(0x60, "tpsp: 0x60"); - PS2_MOUSE_SEND(0x61, "tpsp: 0x61"); - - // inquire pts status - rcv = ps2_host_send(0xE2); - rcv = ps2_host_send(0x2C); - rcv = ps2_host_recv_response(); - if ((rcv & 1) == 1) { - // if on, disable pts +#ifdef PS2_MOUSE_ENABLE + void ps2_mouse_init_user() { + uint8_t rcv; + + // set TrackPoint sensitivity + PS2_MOUSE_SEND(0xE2, "tpsens: 0xE2"); + PS2_MOUSE_SEND(0x81, "tpsens: 0x81"); + PS2_MOUSE_SEND(0x4A, "tpsens: 0x4A"); + PS2_MOUSE_SEND(0x49, "tpsens: 0x59"); + + // set TrackPoint Negative Inertia factor + PS2_MOUSE_SEND(0xE2, "tpnegin: 0xE2"); + PS2_MOUSE_SEND(0x81, "tpnegin: 0x81"); + PS2_MOUSE_SEND(0x4D, "tpnegin: 0x4D"); + PS2_MOUSE_SEND(0x06, "tpnegin: 0x06"); + + // set TrackPoint speed + // (transfer function upper plateau speed) + PS2_MOUSE_SEND(0xE2, "tpsp: 0xE2"); + PS2_MOUSE_SEND(0x81, "tpsp: 0x81"); + PS2_MOUSE_SEND(0x60, "tpsp: 0x60"); + PS2_MOUSE_SEND(0x61, "tpsp: 0x61"); + + // inquire pts status rcv = ps2_host_send(0xE2); - rcv = ps2_host_send(0x47); rcv = ps2_host_send(0x2C); - rcv = ps2_host_send(0x01); - } -}
\ No newline at end of file + rcv = ps2_host_recv_response(); + if ((rcv & 1) == 1) { + // if on, disable pts + rcv = ps2_host_send(0xE2); + rcv = ps2_host_send(0x47); + rcv = ps2_host_send(0x2C); + rcv = ps2_host_send(0x01); + } + } +#endif
\ No newline at end of file diff --git a/keyboards/handwired/promethium/keymaps/priyadi/readme.md b/keyboards/handwired/promethium/keymaps/priyadi/readme.md deleted file mode 100644 index e69de29bb..000000000 --- a/keyboards/handwired/promethium/keymaps/priyadi/readme.md +++ /dev/null diff --git a/keyboards/handwired/promethium/promethium.c b/keyboards/handwired/promethium/promethium.c index 62e2281fa..4943f8c9f 100644 --- a/keyboards/handwired/promethium/promethium.c +++ b/keyboards/handwired/promethium/promethium.c @@ -36,3 +36,7 @@ void led_set_kb(uint8_t usb_led) { led_set_user(usb_led); } +__attribute__ ((weak)) +void led_set_user(uint8_t usb_led) { +} + diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h index da37e5c56..260f140c5 100644 --- a/keyboards/handwired/promethium/promethium.h +++ b/keyboards/handwired/promethium/promethium.h @@ -1,108 +1,10 @@ #ifndef PROMETHIUM_H #define PROMETHIUM_H -#include "quantum.h" +#include "stdint.h" -#define PS2_INIT_DELAY 2000 -#define UNICODE_TYPE_DELAY 0 -#define BATTERY_PIN 9 -#define BATTERY_POLL 30000 -#define MAX_VOLTAGE 4.2 -#define MIN_VOLTAGE 3.2 - -#define KEYMAP( \ - k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ - k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \ -) \ -{ \ - {k11, k12, k13, k14, k15, k16}, \ - {k21, k22, k23, k24, k25, k26}, \ - {k31, k32, k33, k34, k35, k36}, \ - {k41, k42, k43, k44, k45, k46}, \ - {k17, k18, k19, k1a, k1b, k1c}, \ - {k27, k28, k29, k2a, k2b, k2c}, \ - {k37, k38, k39, k3a, k3b, k3c}, \ - {k47, k48, k49, k4a, k4b, k4c} \ -} - - - -enum led_sequence { - LED_IND_BLUETOOTH, - LED_IND_USB, - LED_IND_BATTERY, - - LED_IND_FUNC, - LED_IND_NUM, - LED_IND_EMOJI, - - LED_BKSP, - LED_ENT, - LED_RSFT, - LED_RCTL, - - LED_RGUI, - LED_SLSH, - LED_SCLN, - LED_P, - - LED_O, - LED_L, - LED_DOT, - LED_RALT, - - LED_EMOJI, - LED_COMM, - LED_K, - LED_I, - - LED_U, - LED_J, - LED_M, - LED_FUNC, - - LED_RSPC, - LED_N, - LED_HH, - LED_Y, - - LED_TRACKPOINT3, - LED_TRACKPOINT2, - LED_TRACKPOINT1, - - LED_LSPC, - LED_B, - LED_G, - LED_T, - - LED_R, - LED_F, - LED_V, - LED_NUM, - - LED_PUNC, - LED_C, - LED_D, - LED_E, - - LED_W, - LED_S, - LED_X, - LED_LALT, - - LED_LGUI, - LED_Z, - LED_A, - LED_Q, - - LED_TAB, - LED_ESC, - LED_LSFT, - LED_LCTL, -}; +void battery_poll(uint8_t level); +void led_set_kb(uint8_t usb_led); +void led_set_user(uint8_t usb_led); #endif - -void battery_poll(uint8_t level);
\ No newline at end of file diff --git a/keyboards/planck/keymaps/callum/keymap.c b/keyboards/planck/keymaps/callum/keymap.c index 2acd988ea..aede27df7 100644 --- a/keyboards/planck/keymaps/callum/keymap.c +++ b/keyboards/planck/keymaps/callum/keymap.c @@ -14,7 +14,7 @@ extern keymap_config_t keymap_config; #define _FUNC 4 #define ENDASH LALT(KC_MINS) #define POUND LALT(KC_3) - +#define H(X) LALT(LCTL(X)) enum planck_keycodes { MOVE = SAFE_RANGE, @@ -48,19 +48,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* MOVE * ,-----------------------------------------------------------------------------------. - * | Esc | | Home | Up | End | | | Home | Up | End | | Esc | + * | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del | + * | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | | + * | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ [_MOVE] = { - {KC_ESC, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, KC_ESC }, - {KC_DEL, KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL }, - {_______, XXXXXXX, XXXXXXX, KC_PGUP, KC_PGDN, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______}, + {H(KC_3), H(KC_F1),H(KC_F2),H(KC_F3),H(KC_F4),H(KC_F5),H(KC_8), KC_HOME, KC_UP, KC_END, H(KC_7), KC_ESC }, + {H(KC_4), H(KC_F6),H(KC_F7),H(KC_F8),H(KC_F9),H(KC_F10),H(KC_9),KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL }, + {_______, H(KC_F11),H(KC_F12),H(KC_0),H(KC_1),H(KC_2), H(KC_A), KC_PGDN, KC_PGUP, H(KC_5), H(KC_6), _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} }, @@ -114,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_FUNC] = { {RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU}, {XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_VOLD}, - {_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER, XXXXXXX, XXXXXXX, XXXXXXX, _______}, + {_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER,XXXXXXX, XXXXXXX, XXXXXXX, _______}, {_______, _______, _______, _______, KC_MPRV, KC_MUTE, KC_MPLY, KC_MNXT, _______, _______, _______, _______} } diff --git a/keyboards/planck/keymaps/callum/readme.md b/keyboards/planck/keymaps/callum/readme.md index 71e200b9d..4d4e5cdd7 100644 --- a/keyboards/planck/keymaps/callum/readme.md +++ b/keyboards/planck/keymaps/callum/readme.md @@ -6,7 +6,7 @@ This is a layout for the grid planck, built with a few ideals in mind: - The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible. - There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make. -We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster and other movement keys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously. +We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster, other movement keys, and hotkeys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously. ``` /* BASE @@ -23,11 +23,11 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c /* MOVE * ,-----------------------------------------------------------------------------------. - * | Esc | | Home | Up | End | | | Home | Up | End | | Esc | + * | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del | + * | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | | + * | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' @@ -68,4 +68,4 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c * | | | | | Prev | Mute | Play | Next | | | | | * `-----------------------------------------------------------------------------------' */ - ``` +``` diff --git a/keyboards/planck/keymaps/cbbrowne/config.h b/keyboards/planck/keymaps/cbbrowne/config.h index bd15fd5a2..3a4ee907f 100644 --- a/keyboards/planck/keymaps/cbbrowne/config.h +++ b/keyboards/planck/keymaps/cbbrowne/config.h @@ -1,8 +1,12 @@ #ifndef CONFIG_USER_H #define CONFIG_USER_H +#ifndef NO_DEBUG #define NO_DEBUG +#endif +#ifndef NO_PRINT #define NO_PRINT +#endif #include "../../config.h" diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 1b1b998b2..d149019fe 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -102,16 +102,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' */ [_LOWER] = { - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, - {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, /* Raise @@ -120,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' @@ -138,7 +138,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | | S | T | P | H | * | * | F | P | L | T | D | * |------+------+------+------+------+------|------+------+------+------+------+------| - * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * | | S | K | W | R | * | * | R | B | G | S | Z | * |------+------+------+------+------+------+------+------+------+------+------+------| * | Exit | | | A | O | | E | U | | | | * `-----------------------------------------------------------------------------------' @@ -163,7 +163,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = { - {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL }, {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} diff --git a/keyboards/planck/keymaps/espynn/keyboard-layout.jpg b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg Binary files differindex 55e5396bf..c5e438f6a 100644 --- a/keyboards/planck/keymaps/espynn/keyboard-layout.jpg +++ b/keyboards/planck/keymaps/espynn/keyboard-layout.jpg diff --git a/keyboards/planck/keymaps/espynn/keymap.c b/keyboards/planck/keymaps/espynn/keymap.c index 4a3fe32b8..a24ad9d48 100644 --- a/keyboards/planck/keymaps/espynn/keymap.c +++ b/keyboards/planck/keymaps/espynn/keymap.c @@ -60,7 +60,7 @@ const uint16_t PROGMEM fn_actions[] = { [7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS), }; -// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l +// This config can be found at Keyboard layout editor site: https://goo.gl/cF7uIO const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = { /* QWERTY */ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, @@ -69,22 +69,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, [_LOWER] = { /* LOWER */ - {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_MINS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, {KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} }, [_RAISE] = { /* RAISE */ - {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PLUS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, S(KC_COMM), S(KC_DOT), KC_BSLS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [_CUSTOM] = { /* CUSTOM */ - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, CUS4, KC_TRNS, KC_F12, KC_TRNS}, + {KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {BL, RESET, LALT(LCTL(KC_DEL)), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} } }; diff --git a/keyboards/planck/keymaps/espynn/layout.json b/keyboards/planck/keymaps/espynn/layout.json index 38ccc3452..ccdf2afde 100644 --- a/keyboards/planck/keymaps/espynn/layout.json +++ b/keyboards/planck/keymaps/espynn/layout.json @@ -3,6 +3,7 @@ "backcolor": "#858585", "name": "Planck 40%", "author": "James Folkert", + "notes": "# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard\nAdded several custom functions to the keymap from the \"ab\" map. Special thanks to \"mollat\" for demonstration of macros in their keymap.c\n \n\n![Layout](keyboard-layout.png \"Practical Keymap\")\n\n* Online keyboard layout editor: http://goo.gl/mlLAFZ\n\n# Notes\n* Front legend text is the custom layer (both raise and lower)\n* Holding is denoted by down arrow, for example, right shift is an enter button when tapped, shift when held\n* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here\n* I disregarded the advice of Jack and used macros for passwords. I accept my fate.\n* RAISE and LOWER also acts as PgUp and PgDn when tapped.\n* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)\n* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.", "background": { "name": "Aluminium brushed", "style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');" @@ -19,41 +20,49 @@ 2, 2, 0, - 2 + 0 ] }, - "F1\n1\n\n!\n\n\n\n\n\n<i class='kb kb-Tab-2'></i>", - "F2\n2\n\n@\n\n\n\n\n\nQ", - "F3\n3\n\n#\n\n\n\n\n\nW", - "F4\n4\n\n$\n\n\n\n\n\nE", - "F5\n5\n\n%\n\n\n\n\n\nR", - "F6\n6\n\n^\n\n\n\n\n\nT", - "F7\n6\n\n&\n\n\n\n\n\nY", - "F8\n8\n\n*\nMacro4\n\n\n\n\nU", - "F9\n9\n\n(\n\n\n\n\n\nI", + "!\n1\n\n\nF1\n\n\n\n\n<i class='kb kb-Tab-2'></i>", + "@\n2\n\n\nF2\n\n\n\n\nQ", + "#\n3\n\n\nF3\n\n\n\n\nW", + "$\n4\n\n\nF4\n\n\n\n\nE", + "%\n5\n\n\nF5\n\n\n\n\nR", + "^\n6\n\n\nF6\n\n\n\n\nT", + "&\n7\n\n\nF7\n\n\n\n\nY", + "*\n8\n\n\nF8\n\n\n\n\nU", + "(\n9\n\n\nF9\n\n\n\n\nI", { "fa": [ + 2, 0, 0, - 0, - 2 + 0 ] }, - "F10\n0\n\n)\n\n\n\n\n\nO", + ")\n0\n\n\nF10\n\n\n\n\nO", { "fa": [ 2, 2, 0, - 2 + 0, + 0, + 0, + 0, + 0, + 0 ] }, - "F11\n-\n\n_\n\n\n\n\n\nP", - "F12\n=\n\n+\n\n\n\n\n\n<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>" + "_\n-\n\n\nF11\n\n\n\n\nP", + { + "a": 7, + "f": 3 + }, + "<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>" ], [ { - "a": 7, "f": 3 }, "<i class='mss mss-Unicode-DeleteRight-Big-2'></i>", @@ -66,12 +75,12 @@ }, "S", { + "a": 4, "f": 3 }, - "D", + "=\n_\n\n\n\n\n\n\n\nD", { "t": "#ff0000", - "a": 4, "f": 3 }, "\n(\n\n\n\n\n\n\n\nF", @@ -93,24 +102,21 @@ "t": "#000000", "f": 3 }, - "{\n\n\n\n\n\n\n\n\nK", + "+\n-\n\n\nMacro4\n\n\n\n\nK", { + "a": 7, "f": 3 }, - "{\n\n\n\n\n\n\n\n\nL", + "L", { + "a": 6, "fa": [ 2, 2, - 2, - 2, - 0, - 0, - 0, 2 ] }, - "\\\n\n|\n\n\n\n\n:\n\n;", + "\n\n:\n\nF12\n\n\n\n;", { "a": 7, "fa": [ @@ -141,66 +147,79 @@ "fa": [ 2, 2, - 2, - 2 + 0, + 0 ] }, - "\\\n[\n|\n{\nPaste\n\n\n\n\nV", - "|\n]\n\n}\nMacro1\n\n\n\n\nB", - "`\n'\n~\n\"\nMacro5\n\n\n\n\nN", + "\\\n[\n\n\nPaste\n\n\n\n\nV", + "|\n]\n\n\nMacro1\n\n\n\n\nB", + "`\n'\n\n\nMacro5\n\n\n\n\nN", "~\n\"\n\n\nMacro2\n\n\n\n\nM", { "fa": [ 2, 2, - 2, - 2, 0, 0, 0, - 1 + 0, + 0, + 2 ] }, - "[\n\n{\n\n\n\n\n<\n\n,", - "[\n\n{\n\n\n\n\n\n\n.", + "<\n\n\n\n\n\n\n<\n\n,", { - "a": 6 + "fa": [ + 2, + 2, + 0 + ] }, - "\n\n?\n\n\n\n\n\n/", + ">\n\n\n\n\n\n\n>\n\n.", { - "a": 4, "fa": [ + 0, 2, - 2, + 0, + 0, + 0, + 0, + 0, + 2 + ] + }, + "\\\n\n\n\n\n\n\n?\n\n/", + { + "fa": [ + 0, 2, 0, 0, 0, 0, - 1, - 9, - 0 + 0, + 2, + 9 ] }, "\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift" ], [ { - "a": 7, - "f": 3 + "a": 7 }, "Ctrl\n\n\n\nBLight", { "a": 4, "fa": [ - 2, + 0, 1, - 2, 0, 0, 0, 0, - 1, + 0, + 2, 9, 9 ] @@ -208,29 +227,29 @@ "\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>", { "fa": [ - 2, + 0, 1, - 2, 0, 0, 0, 0, - 1, + 0, + 2, 9, 6 ] }, - "\nZIn\n\n\n\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>", + "\nZIn\n\n\nc.a.del\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>", { "fa": [ - 2, + 0, 1, - 2, 0, 0, 0, 0, - 1, + 0, + 2, 9, 9 ] diff --git a/keyboards/planck/keymaps/espynn/readme.md b/keyboards/planck/keymaps/espynn/readme.md index 8882f4601..ea84cf955 100644 --- a/keyboards/planck/keymaps/espynn/readme.md +++ b/keyboards/planck/keymaps/espynn/readme.md @@ -3,7 +3,7 @@ Created by James Folkert: https://twitter.com/trekloFsemaJ Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c -![Layout](keyboard-layout.png "Practical Keymap") +![Layout](keyboard-layout.jpg "Practical Keymap") * Online keyboard layout editor: http://www.keyboard-layout-editor.com/ @@ -14,5 +14,11 @@ Added several custom functions to the keymap from the "ab" map. Special thanks t * I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4 * add your mobile and email to the keymap before make * RAISE and LOWER also acts as PgUp and PgDn when tapped. -* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works) -* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.
\ No newline at end of file +* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience. + +## changes +* Removed some unneeded keys from raise and lower layers +* moved the + and = signs, backspace is now more intuitive +* moved all the Function keys to CUSTOM layer +* added ctrl alt del to CUSTOM layer +* simplified the layout picture greatly
\ No newline at end of file diff --git a/keyboards/planck/keymaps/priyadi/Makefile b/keyboards/planck/keymaps/priyadi/Makefile index 336608b8c..27c2638e2 100644 --- a/keyboards/planck/keymaps/priyadi/Makefile +++ b/keyboards/planck/keymaps/priyadi/Makefile @@ -10,12 +10,13 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes # Unicode map BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. API_SYSEX_ENABLE = no +FAUXCLICKY_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/planck/keymaps/priyadi/config.h b/keyboards/planck/keymaps/priyadi/config.h new file mode 100644 index 000000000..82e4a25c6 --- /dev/null +++ b/keyboards/planck/keymaps/priyadi/config.h @@ -0,0 +1,39 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define PRIYADI_PLANCK + +/* bootmagic salt key */ +#define BOOTMAGIC_KEY_SALT KC_ESC + +/* skip bootmagic and eeconfig */ +#define BOOTMAGIC_KEY_SKIP KC_SPACE + +#define PREVENT_STUCK_MODIFIERS + +#define UNICODE_TYPE_DELAY 0 + +#define LAYOUT_DVORAK +#define LAYOUT_COLEMAK +#define LAYOUT_NORMAN +#define LAYOUT_WORKMAN + +#define DOUBLESPACE_LAYER_ENABLE + // #define TOLELOT_ENABLE + +#define KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \ +) \ +{ \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c}, \ + {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c} \ +} + +#endif diff --git a/keyboards/planck/keymaps/priyadi/keymap.c b/keyboards/planck/keymaps/priyadi/keymap.c index 2e979221a..bb3a2e92c 100644 --- a/keyboards/planck/keymaps/priyadi/keymap.c +++ b/keyboards/planck/keymaps/priyadi/keymap.c @@ -1,680 +1 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include "planck.h" -#include "action_layer.h" -#ifdef AUDIO_ENABLE - #include "audio.h" - #include "musical_notes.h" -#endif -#include "eeconfig.h" -#include "process_unicode.h" -#include "quantum.h" - -// #define TOLELOT_ENABLE - -extern keymap_config_t keymap_config; - -enum layers { - _QWERTY, - _COLEMAK, - _WORKMAN, - _PUNC, - _NUM, - _FUNC, - _EMOJI, - _GREEKU, - _GREEKL, - _GUI, -}; - -enum planck_keycodes { - // layouts - QWERTY = SAFE_RANGE, - COLEMAK, - WORKMAN, - - // layer switchers - PUNC, - NUM, - FUNC, - EMOJI, - GUI, - GREEK, - - // os switchers - LINUX, - WIN, - OSX, -}; - -// Fillers to make layering clearer - -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -// unicode map - -enum unicode_name { - GRIN, // grinning face 😊 - TJOY, // tears of joy 😂 - SMILE, // grining face with smiling eyes 😁 - HEART, // heart ❤ - EYERT, // smiling face with heart shaped eyes 😍 - CRY, // crying face 😭 - SMEYE, // smiling face with smiling eyes 😊 - UNAMU, // unamused 😒 - KISS, // kiss 😘 - HART2, // two hearts 💕 - WEARY, // weary 😩 - OKHND, // ok hand sign 👌 - PENSV, // pensive 😔 - SMIRK, // smirk 😏 - RECYC, // recycle ♻ - WINK, // wink 😉 - THMUP, // thumb up 👍 - THMDN, // thumb down 👎 - PRAY, // pray 🙏 - PHEW, // relieved 😌 - MUSIC, // musical notes - FLUSH, // flushed 😳 - CELEB, // celebration 🙌 - CRY2, // crying face 😢 - COOL, // smile with sunglasses 😎 - NOEVS, // see no evil - NOEVH, // hear no evil - NOEVK, // speak no evil - POO, // pile of poo - EYES, // eyes - VIC, // victory hand - BHART, // broken heart - SLEEP, // sleeping face - SMIL2, // smiling face with open mouth & sweat - HUNRD, // 100 - CONFU, // confused - TONGU, // face with tongue & winking eye - DISAP, // disappointed - YUMMY, // face savoring delicious food - CLAP, // hand clapping - FEAR, // face screaming in fear - HORNS, // smiling face with horns - HALO, // smiling face with halo - BYE, // waving hand - SUN, // sun - MOON, // moon - SKULL, // skull - - // greek letters - UALPH, - UBETA, - UGAMM, - UDELT, - UEPSI, - UZETA, - UETA, - UTHET, - UIOTA, - UKAPP, - ULAMB, - UMU, - UNU, - UXI, - UOMIC, - UPI, - URHO, - USIGM, - UTAU, - UUPSI, - UPHI, - UCHI, - UPSI, - UOMEG, - - LALPH, - LBETA, - LGAMM, - LDELT, - LEPSI, - LZETA, - LETA, - LTHET, - LIOTA, - LKAPP, - LLAMB, - LMU, - LNU, - LXI, - LOMIC, - LPI, - LRHO, - LSIGM, - LTAU, - LUPSI, - LPHI, - LCHI, - LPSI, - LOMEG, - - FSIGM, -}; - -const uint32_t PROGMEM unicode_map[] = { - [GRIN] = 0x1F600, - [TJOY] = 0x1F602, - [SMILE] = 0x1F601, - [HEART] = 0x2764, - [EYERT] = 0x1f60d, - [CRY] = 0x1f62d, - [SMEYE] = 0x1F60A, - [UNAMU] = 0x1F612, - [KISS] = 0x1F618, - [HART2] = 0x1F495, - [WEARY] = 0x1F629, - [OKHND] = 0x1F44C, - [PENSV] = 0x1F614, - [SMIRK] = 0x1F60F, - [RECYC] = 0x267B, - [WINK] = 0x1F609, - [THMUP] = 0x1F44D, - [THMDN] = 0x1F44E, - [PRAY] = 0x1F64F, - [PHEW] = 0x1F60C, - [MUSIC] = 0x1F3B6, - [FLUSH] = 0x1F633, - [CELEB] = 0x1F64C, - [CRY2] = 0x1F622, - [COOL] = 0x1F60E, - [NOEVS] = 0x1F648, - [NOEVH] = 0x1F649, - [NOEVK] = 0x1F64A, - [POO] = 0x1F4A9, - [EYES] = 0x1F440, - [VIC] = 0x270C, - [BHART] = 0x1F494, - [SLEEP] = 0x1F634, - [SMIL2] = 0x1F605, - [HUNRD] = 0x1F4AF, - [CONFU] = 0x1F615, - [TONGU] = 0x1F61C, - [DISAP] = 0x1F61E, - [YUMMY] = 0x1F60B, - [CLAP] = 0x1F44F, - [FEAR] = 0x1F631, - [HORNS] = 0x1F608, - [HALO] = 0x1F607, - [BYE] = 0x1F44B, - [SUN] = 0x2600, - [MOON] = 0x1F314, - [SKULL] = 0x1F480, - - // greek letters - [UALPH] = 0x0391, - [UBETA] = 0x0392, - [UGAMM] = 0x0393, - [UDELT] = 0x0394, - [UEPSI] = 0x0395, - [UZETA] = 0x0396, - [UETA] = 0x0397, - [UTHET] = 0x0398, - [UIOTA] = 0x0399, - [UKAPP] = 0x039A, - [ULAMB] = 0x039B, - [UMU] = 0x039C, - [UNU] = 0x039D, - [UXI] = 0x039E, - [UOMIC] = 0x039F, - [UPI] = 0x03A0, - [URHO] = 0x03A1, - [USIGM] = 0x03A3, - [UTAU] = 0x03A4, - [UUPSI] = 0x03A5, - [UPHI] = 0x03A6, - [UCHI] = 0x03A7, - [UPSI] = 0x03A8, - [UOMEG] = 0x03A9, - [LALPH] = 0x03B1, - [LBETA] = 0x03B2, - [LGAMM] = 0x03B3, - [LDELT] = 0x03B4, - [LEPSI] = 0x03B5, - [LZETA] = 0x03B6, - [LETA] = 0x03B7, - [LTHET] = 0x03B8, - [LIOTA] = 0x03B9, - [LKAPP] = 0x03BA, - [LLAMB] = 0x03BB, - [LMU] = 0x03BC, - [LNU] = 0x03BD, - [LXI] = 0x03BE, - [LOMIC] = 0x03BF, - [LPI] = 0x03C0, - [LRHO] = 0x03C1, - [LSIGM] = 0x03C3, - [LTAU] = 0x03C4, - [LUPSI] = 0x03C5, - [LPHI] = 0x03C6, - [LCHI] = 0x03C7, - [LPSI] = 0x03C8, - [LOMEG] = 0x03C9, - [FSIGM] = 0x03C2, -}; - - -// hybrid shift - = -// #undef KC_LSFT -// #define KC_LSFT MT(MOD_LSFT, KC_MINS) -// #undef KC_RSFT -// #define KC_RSFT MT(MOD_LSFT, KC_EQL) - - -// hybrid right-gui & scroll lock (mapped to Compose in OS) -#undef KC_RCTL -#define KC_RCTL MT(MOD_LCTL, KC_SLCK) - -// keymaps - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; |Enter | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | Punc | Num | Space | Func |Emoji |Greek |AltGr | Ctrl | - * `-----------------------------------------------------------------------------------' - */ -[_QWERTY] = { - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, - {KC_LCTL, KC_LALT, KC_LGUI, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, GREEK, KC_RALT, KC_RCTL} -}, - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O |Enter | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Shift | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | Punc | Num | Space | Func |Emoji |AltGr | GUI | Ctrl | - * `-----------------------------------------------------------------------------------' - */ -[_COLEMAK] = { - {_______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______}, - {_______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______}, - {_______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} -}, - -/* Workman - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | D | R | W | B | J | F | U | P | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | H | T | G | Y | N | E | O | I |Enter | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | M | C | V | K | K | , | . | / |Shift | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | GUI | Alt | Punc | Num | Space | Func |Emoji |AltGr | GUI | Ctrl | - * `-----------------------------------------------------------------------------------' - */ -[_WORKMAN] = { - {_______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______}, - {_______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______}, - {_______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} -}, - -/* Uppercase Greek - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_GREEKU] = { - {_______, _______, _______,X(UEPSI), X(URHO), X(UTAU),X(UUPSI),X(UTHET),X(UIOTA),X(UOMIC), X(UPI), _______}, - {_______,X(UALPH),X(USIGM),X(UDELT), X(UPHI),X(UGAMM), X(UETA), X(UXI),X(UKAPP),X(ULAMB), _______, _______}, - {_______,X(UZETA), X(UCHI), X(UPSI),X(UOMEG),X(UBETA), X(UNU), X(UMU), _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} -}, - -/* Lowercase Greek - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_GREEKL] = { - {_______, _______,X(FSIGM),X(LEPSI), X(LRHO), X(LTAU),X(LUPSI),X(LTHET),X(LIOTA),X(LOMIC), X(LPI), _______}, - {_______,X(LALPH),X(LSIGM),X(LDELT), X(LPHI),X(LGAMM), X(LETA), X(LXI),X(LKAPP),X(LLAMB), _______, _______}, - {_______,X(LZETA), X(LCHI), X(LPSI),X(LOMEG),X(LBETA), X(LNU), X(LMU), _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} -}, - -/* Punc - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | ` | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | \ | - | = | < | > | ( | ) | ' | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | _ | + | { | } | [ | ] | " | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_PUNC] = { - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_GRV }, - {XXXXXXX, XXXXXXX, KC_BSLS, KC_MINS, KC_EQL, KC_LABK, KC_RABK, KC_LPRN, KC_RPRN, KC_QUOT, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_DQUO, XXXXXXX, XXXXXXX}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} -}, - -/* Num - * ,-----------------------------------------------------------------------------------. - * | ^ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | @ | A | B | C | ( | ) | 4 | 5 | 6 | : |Enter | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | & | # | D | E | F | [ | ] | 1 | 2 | 3 | / | * | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | x | | | 0 | , | . | + | - | - * `-----------------------------------------------------------------------------------' - */ -[_NUM] = { - {KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - { KC_ESC, KC_AT, S(KC_A), S(KC_B), S(KC_C), KC_LPRN, KC_RPRN, KC_4, KC_5, KC_6, KC_COLN, KC_ENT}, - {KC_AMPR, KC_HASH, S(KC_D), S(KC_E), S(KC_F), KC_LBRC, KC_RBRC, KC_1, KC_2, KC_3, KC_SLSH, KC_ASTR}, - {_______, _______, _______, KC_X, _______, KC_SPC, KC_SPC, KC_0, KC_COMM, KC_DOT, KC_PLUS, KC_MINS} -}, - -/* Func - * ,-----------------------------------------------------------------------------------. - * | | F1 | F2 | F3 | F4 | | | PgUp | Up | PgDn | PgUp | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | Ins | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F9 | F10 | F11 | F12 | | | | Home | End | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_FUNC] = { - {XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL}, - {XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8,KC_PSCREEN,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_INS}, - {_______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} -}, - -/* Emoji - * ,-----------------------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_EMOJI] = { - {X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW)}, - {X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS)}, - {X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH)}, - { X(POO), X(EYES),X(HUNRD), _______,X(SKULL),X(HORNS), X(HALO), X(FEAR), _______,X(YUMMY),X(DISAP),X(NOEVK)} -}, - -/* GUI - * ,-----------------------------------------------------------------------------------. - * | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * |Linux | | Vol- | Mute | Vol+ | | | D- | | D+ | |Qwerty| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Win | | Prev | Play | Next | | | | | | |Colmak| - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | OSX | | | | | BL- | BL+ | | | | |Workmn| - * `-----------------------------------------------------------------------------------' - */ -[_GUI] = { - {_______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______}, - { LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY}, - { WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, COLEMAK}, - { OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, _______, _______, WORKMAN} -}, - -}; - -#ifdef AUDIO_ENABLE -float tone_startup[][2] = SONG(STARTUP_SOUND); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); -float tone_workman[][2] = SONG(DVORAK_SOUND); -float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -float tone_linux[][2] = SONG(CAPS_LOCK_ON_SOUND); -float tone_windows[][2] = SONG(SCROLL_LOCK_ON_SOUND); -float tone_osx[][2] = SONG(NUM_LOCK_ON_SOUND); -float tone_click[][2] = SONG(MUSICAL_NOTE(_F3, 2)); -float tone_release[][2] = SONG(MUSICAL_NOTE(_A3, 2)); -float tone_tolelot[][2] = SONG(Q__NOTE(_E5), Q__NOTE(_C5), Q__NOTE(_D5)); -#endif - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - // faux clicky - // if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0); - #ifdef AUDIO_ENABLE - #ifdef TOLELOT_ENABLE - if (record->event.pressed) { - PLAY_NOTE_ARRAY(tone_tolelot, false, 0); - } - #else - if (record->event.pressed) { - PLAY_NOTE_ARRAY(tone_click, false, 0); - } else { - PLAY_NOTE_ARRAY(tone_release, false, 0); - } - #endif - #endif - - bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT); - bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT); - - switch (keycode) { - // Greek layer handling - case GREEK: - if (record->event.pressed) { - if (lshifted || rshifted) { - layer_on(_GREEKU); - layer_off(_GREEKL); - } else { - layer_on(_GREEKL); - layer_off(_GREEKU); - } - } else { - layer_off(_GREEKU); - layer_off(_GREEKL); - } - return false; - break; - - case KC_LSFT: - case KC_RSFT: - ; - uint8_t layer = biton32(layer_state); - if (layer == _GREEKU || layer == _GREEKL) { - if (record->event.pressed) { - layer_on(_GREEKU); - layer_off(_GREEKL); - } else { - if (lshifted ^ rshifted) { // if only one shift is pressed - layer_on(_GREEKL); - layer_off(_GREEKU); - } - } - } - return true; - break; - - // QWERTZ style comma and dot: semicolon and colon when shifted - case KC_COMM: - if (record->event.pressed) { - if (lshifted || rshifted) { - if (lshifted) unregister_code(KC_LSFT); - if (rshifted) unregister_code(KC_RSFT); - register_code(KC_SCLN); - unregister_code(KC_SCLN); - if (lshifted) register_code(KC_LSFT); - if (rshifted) register_code(KC_RSFT); - } else { - register_code(KC_COMM); - unregister_code(KC_COMM); - } - } - return false; - break; - case KC_DOT: - if (record->event.pressed) { - if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) { - register_code(KC_SCLN); - unregister_code(KC_SCLN); - } else { - register_code(KC_DOT); - unregister_code(KC_DOT); - } - } - return false; - break; - - // layout switcher - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); - #endif - persistant_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); - #endif - persistant_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case WORKMAN: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_workman, false, 0); - #endif - persistant_default_layer_set(1UL<<_WORKMAN); - } - return false; - break; - - // layer switchers - case PUNC: - if (record->event.pressed) { - layer_on(_PUNC); - update_tri_layer(_PUNC, _EMOJI, _GUI); - } else { - layer_off(_PUNC); - update_tri_layer(_PUNC, _EMOJI, _GUI); - } - return false; - break; - case EMOJI: - if (record->event.pressed) { - layer_on(_EMOJI); - update_tri_layer(_PUNC, _EMOJI, _GUI); - } else { - layer_off(_EMOJI); - update_tri_layer(_PUNC, _EMOJI, _GUI); - } - return false; - break; - case NUM: - if (record->event.pressed) { - layer_on(_NUM); - } else { - layer_off(_NUM); - } - return false; - break; - case FUNC: - if (record->event.pressed) { - layer_on(_FUNC); - } else { - layer_off(_FUNC); - } - return false; - break; - - // OS switchers - case LINUX: - set_unicode_input_mode(UC_LNX); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_linux, false, 0); - #endif - return false; - break; - case WIN: - set_unicode_input_mode(UC_WINC); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_windows, false, 0); - #endif - return false; - break; - case OSX: - set_unicode_input_mode(UC_OSX); - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_osx, false, 0); - #endif - return false; - break; - } - return true; -} - -void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - startup_user(); - #endif - set_unicode_input_mode(UC_LNX); -} - -#ifdef AUDIO_ENABLE - -void startup_user() -{ - _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); -} - -void shutdown_user() -{ - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); -} - -#endif
\ No newline at end of file +#include "../../../handwired/promethium/keymaps/priyadi/keymap.c"
\ No newline at end of file diff --git a/keyboards/planck/keymaps/unicode/keymap.c b/keyboards/planck/keymaps/unicode/keymap.c index d73e7e09d..1b4ca8ed7 100644 --- a/keyboards/planck/keymaps/unicode/keymap.c +++ b/keyboards/planck/keymaps/unicode/keymap.c @@ -195,24 +195,20 @@ const uint16_t PROGMEM fn_actions[] = { }; #ifdef AUDIO_ENABLE -float tone_startup[][2] = { - {440.0*pow(2.0,(31)/12.0), 12}, - {440.0*pow(2.0,(28)/12.0), 8}, - {440.0*pow(2.0,(19)/12.0), 8}, - {440.0*pow(2.0,(24)/12.0), 8}, - {440.0*pow(2.0,(28)/12.0), 20} -}; +float tone_startup[][2] = SONG(STARTUP_SOUND); float tone_qwerty[][2] = SONG(QWERTY_SOUND); float tone_dvorak[][2] = SONG(DVORAK_SOUND); float tone_colemak[][2] = SONG(COLEMAK_SOUND); float tone_plover[][2] = SONG(PLOVER_SOUND); float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -float goodbye[][2] = SONG(GOODBYE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); #endif + void persistant_default_layer_set(uint16_t default_layer) { eeconfig_update_default_layer(default_layer); default_layer_set(default_layer); @@ -309,18 +305,35 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) }; void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - _delay_ms(20); // stops the tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); - #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif } #ifdef AUDIO_ENABLE -void play_goodbye_tone() + +void startup_user() { - PLAY_NOTE_ARRAY(goodbye, false, 0); - _delay_ms(150); + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); } -#endif +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/roadkit/Makefile b/keyboards/roadkit/Makefile new file mode 100644 index 000000000..4e2a6f00f --- /dev/null +++ b/keyboards/roadkit/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/roadkit/config.h b/keyboards/roadkit/config.h new file mode 100644 index 000000000..9596f7f3b --- /dev/null +++ b/keyboards/roadkit/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEAE +#define PRODUCT_ID 0x8846 +#define DEVICE_VER 0x0001 +#define MANUFACTURER TheVan Keyboards +#define PRODUCT Roadkit Micro +#define DESCRIPTION keyboard firmware for Roadkit Micro + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F5, D7, B4 } +#define MATRIX_COL_PINS { F1, F4, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/roadkit/keymaps/default/Makefile b/keyboards/roadkit/keymaps/default/Makefile new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/roadkit/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/default/config.h b/keyboards/roadkit/keymaps/default/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/roadkit/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/default/keymap.c b/keyboards/roadkit/keymaps/default/keymap.c new file mode 100644 index 000000000..3fc18915a --- /dev/null +++ b/keyboards/roadkit/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +#include "roadkit.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NP 0 + +// Macro name shortcuts +#define NUMPAD M(_NP) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NP] = /* Numpad */ + KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ + KC_KP_0, KC_KP_DOT), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _NP: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_NP); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/roadkit/keymaps/default/readme.md b/keyboards/roadkit/keymaps/default/readme.md new file mode 100644 index 000000000..5984a71d1 --- /dev/null +++ b/keyboards/roadkit/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for roadkit diff --git a/keyboards/roadkit/keymaps/singles/Makefile b/keyboards/roadkit/keymaps/singles/Makefile new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/roadkit/keymaps/singles/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singles/config.h b/keyboards/roadkit/keymaps/singles/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/roadkit/keymaps/singles/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/roadkit/keymaps/singles/keymap.c b/keyboards/roadkit/keymaps/singles/keymap.c new file mode 100644 index 000000000..5ee7a752b --- /dev/null +++ b/keyboards/roadkit/keymaps/singles/keymap.c @@ -0,0 +1,61 @@ +#include "roadkit.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NP 0 +#define _L1 1 + +// Macro name shortcuts +#define NUMPAD M(_NP) +#define LAYER1 M(_L1) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NP] = /* Numpad */ + SINGLES_KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ + KC_KP_0, KC_KP_DOT, TG(_L1), KC_BSPC), + [_L1] = /* LAYER 1 */ + SINGLES_KEYMAP(KC_NUMLOCK, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, KC_UP, KC_TRNS, KC_VOLD, \ + KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _L1: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_L1); + } + break; + case _NP: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_NP); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/roadkit/keymaps/singles/readme.md b/keyboards/roadkit/keymaps/singles/readme.md new file mode 100644 index 000000000..48ea4a8b3 --- /dev/null +++ b/keyboards/roadkit/keymaps/singles/readme.md @@ -0,0 +1,3 @@ +# The singles keymap for roadkit + +This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point. diff --git a/keyboards/roadkit/readme.md b/keyboards/roadkit/readme.md new file mode 100644 index 000000000..d7480a165 --- /dev/null +++ b/keyboards/roadkit/readme.md @@ -0,0 +1,32 @@ +roadkit keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the QMK Wiki](https://github.com/qmk/qmk_firmware/wiki). + +## Building + +Download or clone the whole firmware and navigate to the `keyboards/roadkit` folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex. You can then use the programmer of your choice to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. For the roadkit, the default layout is a standard numpad layout. + +### Singles + +The singles layout for the roadkit corresponds to the configuration where only 1u keys are used and there are 16 of them on the board. To build the singles keymap, run `make singles`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/roadkit/roadkit.c b/keyboards/roadkit/roadkit.c new file mode 100644 index 000000000..26e0c51ec --- /dev/null +++ b/keyboards/roadkit/roadkit.c @@ -0,0 +1,28 @@ +#include "roadkit.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/roadkit/roadkit.h b/keyboards/roadkit/roadkit.h new file mode 100644 index 000000000..b10e5740f --- /dev/null +++ b/keyboards/roadkit/roadkit.h @@ -0,0 +1,33 @@ +#ifndef ROADKIT_H +#define ROADKIT_H + +#include "quantum.h" + +// This is a shortcut to help you visually see your layout. +#define KEYMAP( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K23, \ + K30, K32 \ +) \ +{ \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, KC_NO }, \ + { K20, K21, K22, K23 }, \ + { K30, KC_NO, K32, KC_NO } \ +} + +#define SINGLES_KEYMAP( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) \ +{ \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} + +#endif diff --git a/keyboards/roadkit/rules.mk b/keyboards/roadkit/rules.mk new file mode 100644 index 000000000..dbba6bace --- /dev/null +++ b/keyboards/roadkit/rules.mk @@ -0,0 +1,69 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/satan/keymaps/unxmaal/Makefile b/keyboards/satan/keymaps/unxmaal/Makefile new file mode 100644 index 000000000..ee94a67b4 --- /dev/null +++ b/keyboards/satan/keymaps/unxmaal/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/keymaps/unxmaal/README.md b/keyboards/satan/keymaps/unxmaal/README.md new file mode 100644 index 000000000..50ad0cf1f --- /dev/null +++ b/keyboards/satan/keymaps/unxmaal/README.md @@ -0,0 +1,20 @@ +Unxmaal's GH60 Satan Layout +===================== +* Mostly stolen from /u/robotmaxtron + +##Quantum MK Firmware +For the full Quantum feature list, see the parent readme.md. + +* Standard Mac ANSI layout +* Spacebar acts as space when tapped, Fn when held +* Menu acts as menu when tapped, Fn2 when held +* Layer1: + * Top row = `~, F1-F12, Del + * JKIL = arrow cluster +* Layer2: + * Top row = media controls + * JKIL = PgDn/Up/Home/Insert + * Backspace = Reset + +### Additional Credits +Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
\ No newline at end of file diff --git a/keyboards/satan/keymaps/unxmaal/keymap.c b/keyboards/satan/keymaps/unxmaal/keymap.c new file mode 100644 index 000000000..657602de0 --- /dev/null +++ b/keyboards/satan/keymaps/unxmaal/keymap.c @@ -0,0 +1,119 @@ +#include "satan.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _AL 1 +#define _FL 2 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ANSI Base, Mac style + * ,-----------------------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp | + * |-----------------------------------------------------------------------------| + * |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \| + * |-----------------------------------------------------------------------------| + * |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter | + * |-----------------------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | + * |-----------------------------------------------------------------------------| + * |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl| + * `-----------------------------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + MO(_AL), KC_LALT,KC_LGUI, LT(_AL,KC_SPACE), KC_RGUI, KC_RALT, LT(_FL,KC_MENU), KC_RCTL), + /* + * Pok3r style arrow cluster + * ,-----------------------------------------------------------. + * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | + * |-----------------------------------------------------------| + * | | | | | | | | |Up| | | | | | + * |-----------------------------------------------------------| + * | | | | | | | |Left|Down|Right| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_AL] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| + * |-----------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------| + * | | RGB on|RGB step|Hue+|Hue- |Sat+|Sat-|Val+| Val-| | | | + * |-----------------------------------------------------------| + * | | | | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ + _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______, _______), + #else + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/xd60/arrow-cluster.JPG b/keyboards/xd60/arrow-cluster.JPG Binary files differdeleted file mode 100644 index aa03dc08e..000000000 --- a/keyboards/xd60/arrow-cluster.JPG +++ /dev/null diff --git a/keyboards/xd60/config.h b/keyboards/xd60/config.h index 13ae29063..4bbaec882 100644 --- a/keyboards/xd60/config.h +++ b/keyboards/xd60/config.h @@ -25,8 +25,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 #define MANUFACTURER XIUDI -#define PRODUCT XD60 -#define DESCRIPTION XD60 Keyboard by XIUDI +#define PRODUCT XD60v2 +#define DESCRIPTION XD60 v2 Keyboard PCB by XIUDI /* key matrix size */ #define MATRIX_ROWS 5 @@ -46,14 +46,25 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } #define UNUSED_PINS +/* Backlight Setup */ +#define BACKLIGHT_PIN F5 +#define BACKLIGHT_LEVELS 6 + /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 +/* RGB Underglow + * F6 PIN for XD60v2 that has pre-soldered WS2812 LEDs + */ +#define RGB_DI_PIN F6 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 6 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/xd60/keymaps/default/keymap.c b/keyboards/xd60/keymaps/default/keymap.c index ea85c02a3..11be9afca 100644 --- a/keyboards/xd60/keymaps/default/keymap.c +++ b/keyboards/xd60/keymaps/default/keymap.c @@ -9,56 +9,38 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT), // 1: Function Layer KEYMAP( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, \ KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, \ - KC_LSFT, KC_NO, KC_NO, KC_APP, BL_TOGG,BL_DEC, BL_INC, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_NO, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, F(0), KC_HOME, KC_PGDOWN,KC_END), + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_INS, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_HOME, KC_PGDOWN,KC_END), }; +// Custom Actions const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay }; +// Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function + // MACRODOWN only works in this function switch(id) { case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; + if (record->event.pressed) { register_code(KC_RSFT); } + else { unregister_code(KC_RSFT); } + break; } return MACRO_NONE; }; +// Loop void matrix_scan_user(void) { - - // Layer LED indicators - uint32_t layer = layer_state; - - if (layer & (1<<1)) { - xd60_esc_led_on(); - } else { - xd60_esc_led_off(); - } - - /* - if (layer & (1<<2)) { - xd60_poker_leds_on(); - xd60_esc_led_on(); - } else { - xd60_poker_leds_off(); - xd60_esc_led_off(); - } - */ + // Empty }; diff --git a/keyboards/xd60/keymaps/stanleylai/keymap.c b/keyboards/xd60/keymaps/stanleylai/keymap.c index a84ee0f89..feb2cd1b6 100644 --- a/keyboards/xd60/keymaps/stanleylai/keymap.c +++ b/keyboards/xd60/keymaps/stanleylai/keymap.c @@ -8,53 +8,48 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, F(1), KC_UP, KC_DEL, \ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT), // 1: Function Layer KEYMAP( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ - KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP, BL_TOGG, KC_DEL, \ + KC_CAPS, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, \ F(0), KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, \ - KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT, KC_PGUP, KC_INS, \ + KC_LSFT, KC_NO, KC_VOLD, KC_MUTE, KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_INS, \ KC_LCTL, KC_LALT, KC_LGUI, KC_MPLY, KC_RGUI, KC_RALT, KC_HOME, KC_PGDOWN,KC_END), + // 2: RGB Layer + KEYMAP( + KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, RGB_TOG, RGB_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, RGB_HUI, RGB_SAI, RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, RGB_HUD, RGB_SAD, RGB_VAD,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, F(1), KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + }; +// Custom Actions const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + [0] = ACTION_LAYER_MOMENTARY(1), // to Function Layer + [1] = ACTION_LAYER_MOMENTARY(2), // to RGB Layer }; +// Macros const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function + // MACRODOWN only works in this function switch(id) { case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; + if (record->event.pressed) { register_code(KC_RSFT); } + else { unregister_code(KC_RSFT); } + break; } return MACRO_NONE; }; +// Loop void matrix_scan_user(void) { - - // Layer LED indicators - uint32_t layer = layer_state; - - if (layer & (1<<1)) { - xd60_wasd_leds_on(); - xd60_fn_led_on(); - xd60_esc_led_on(); - xd60_poker_leds_on(); - } else { - xd60_wasd_leds_off(); - xd60_fn_led_off(); - xd60_esc_led_off(); - xd60_poker_leds_off(); - } + // Empty }; diff --git a/keyboards/xd60/readme.md b/keyboards/xd60/readme.md index 393ea5d68..224498caa 100644 --- a/keyboards/xd60/readme.md +++ b/keyboards/xd60/readme.md @@ -1,7 +1,6 @@ # QMK Firmware for XIUDI's 60% XD60 PCB -![Top View of XD60 Keyboard, with DSA Dolch keycaps](./top-view.JPG) -![Angled View of XD60 Keyboard Arrow Cluster, with DSA Dolch keycaps](./arrow-cluster.JPG) +![Top View of a pair of XD60 Keyboard](./xd60.JPG) ## Quantum MK Firmware For the full Quantum feature list, see [the parent readme.md](/readme.md). @@ -9,5 +8,10 @@ For the full Quantum feature list, see [the parent readme.md](/readme.md). ## Additional Notes The XD60 is essentially a GH60 rev. C, with support for a right-hand arrow cluster. Includes full compatibility with GH60 expansion boards. Board also supports in-switch LEDs (two-pin, single colour), as well as WS2182 LED strips for underglow lighting. Default keymap included, matching configuration on sale page. +Version 2 PCBs include 6 soldered on RGB underglow LEDs on the bottom, and are labelled "XD60v2" on the top. They are otherwise identical to v1 PCBs. + +## Known Issues +In-switch backlight LEDs seem to only support 1 brightness level. + ## Build To build the default keymap, simply run `make xd60-default`. diff --git a/keyboards/xd60/rules.mk b/keyboards/xd60/rules.mk index e0b92121d..174c3ec84 100644 --- a/keyboards/xd60/rules.mk +++ b/keyboards/xd60/rules.mk @@ -61,5 +61,5 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xd60/top-view.JPG b/keyboards/xd60/top-view.JPG Binary files differdeleted file mode 100644 index 613759b4d..000000000 --- a/keyboards/xd60/top-view.JPG +++ /dev/null diff --git a/keyboards/xd60/xd60.h b/keyboards/xd60/xd60.h index 36442cb52..dd5f63c0c 100644 --- a/keyboards/xd60/xd60.h +++ b/keyboards/xd60/xd60.h @@ -6,24 +6,18 @@ /* XD60 LEDs * GPIO pads - * 0 F7 WASD LEDs - * 1 F6 ESC LED - * 2 F5 FN LED - * 3 F4 POKER Arrow LEDs + * 0 F7 not connected + * 1 F6 RGB PWM Underglow + * 2 F5 Backlight LED + * 3 F4 not connected * B2 Capslock LED * B0 not connected */ inline void xd60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } -inline void xd60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } -inline void xd60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } -inline void xd60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } -inline void xd60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } +inline void xd60_bl_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } inline void xd60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } -inline void xd60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } -inline void xd60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } -inline void xd60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } -inline void xd60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } +inline void xd60_bl_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } /* XD60 Keymap Definition Macro */ #define KEYMAP( \ diff --git a/keyboards/xd60/xd60.jpg b/keyboards/xd60/xd60.jpg Binary files differnew file mode 100644 index 000000000..11654f0fd --- /dev/null +++ b/keyboards/xd60/xd60.jpg diff --git a/quantum/audio/voices.c b/quantum/audio/voices.c index 8326e91ea..c2edb75f0 100644 --- a/quantum/audio/voices.c +++ b/quantum/audio/voices.c @@ -24,6 +24,7 @@ void voice_deiterate() { float voice_envelope(float frequency) { // envelope_index ranges from 0 to 0xFFFF, which is preserved at 880.0 Hz + __attribute__ ((unused)) uint16_t compensated_index = (uint16_t)((float)envelope_index * (880.0 / frequency)); switch (voice) { diff --git a/quantum/fauxclicky.c b/quantum/fauxclicky.c new file mode 100644 index 000000000..13273e705 --- /dev/null +++ b/quantum/fauxclicky.c @@ -0,0 +1,68 @@ +/* +Copyright 2017 Priyadi Iman Nurcahyo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/interrupt.h> +#include <avr/io.h> +#include <timer.h> +#include <fauxclicky.h> +#include <stdbool.h> +#include <musical_notes.h> + +__attribute__ ((weak)) +float fauxclicky_pressed_note[2] = MUSICAL_NOTE(_F3, 2); +__attribute__ ((weak)) +float fauxclicky_released_note[2] = MUSICAL_NOTE(_A3, 2); +__attribute__ ((weak)) +float fauxclicky_beep_note[2] = MUSICAL_NOTE(_C3, 2); + +bool fauxclicky_enabled = true; +uint16_t note_start = 0; +bool note_playing = false; +uint16_t note_period = 0; + +void fauxclicky_init() +{ + // Set port PC6 (OC3A and /OC4A) as output + DDRC |= _BV(PORTC6); + + // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers + TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30); + TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30); +} + +void fauxclicky_stop() +{ + FAUXCLICKY_DISABLE_OUTPUT; + note_playing = false; +} + +void fauxclicky_play(float note[2]) { + if (!fauxclicky_enabled) return; + if (note_playing) fauxclicky_stop(); + FAUXCLICKY_TIMER_PERIOD = (uint16_t)(((float)F_CPU) / (note[0] * FAUXCLICKY_CPU_PRESCALER)); + FAUXCLICKY_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (note[0] * FAUXCLICKY_CPU_PRESCALER)) / 2); + note_playing = true; + note_period = (note[1] / 16) * (60 / (float)FAUXCLICKY_TEMPO) * 100; // check this + note_start = timer_read(); + FAUXCLICKY_ENABLE_OUTPUT; +} + +void fauxclicky_check() { + if (!note_playing) return; + + if (timer_elapsed(note_start) > note_period) { + fauxclicky_stop(); + } +} diff --git a/quantum/fauxclicky.h b/quantum/fauxclicky.h new file mode 100644 index 000000000..109bd0d83 --- /dev/null +++ b/quantum/fauxclicky.h @@ -0,0 +1,99 @@ +/* +Copyright 2017 Priyadi Iman Nurcahyo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifdef AUDIO_ENABLE +#error "AUDIO_ENABLE and FAUXCLICKY_ENABLE cannot be both enabled" +#endif + +#include "musical_notes.h" +#include "stdbool.h" + +__attribute__ ((weak)) +float fauxclicky_pressed_note[2]; +__attribute__ ((weak)) +float fauxclicky_released_note[2]; +__attribute__ ((weak)) +float fauxclicky_beep_note[2]; + +bool fauxclicky_enabled; + +// +// tempo in BPM +// + +#ifndef FAUXCLICKY_TEMPO +#define FAUXCLICKY_TEMPO TEMPO_DEFAULT +#endif + +// beep on press +#define FAUXCLICKY_ACTION_PRESS fauxclicky_play(fauxclicky_pressed_note) + +// beep on release +#define FAUXCLICKY_ACTION_RELEASE fauxclicky_play(fauxclicky_released_note) + +// general purpose beep +#define FAUXCLICKY_BEEP fauxclicky_play(fauxclicky_beep_note) + +// enable +#define FAUXCLICKY_ON fauxclicky_enabled = true + +// disable +#define FAUXCLICKY_OFF do { \ + fauxclicky_enabled = false; \ + fauxclicky_stop(); \ +} while (0) + +// toggle +#define FAUXCLICKY_TOGGLE do { \ + if (fauxclicky_enabled) { \ + FAUXCLICKY_OFF; \ + } else { \ + FAUXCLICKY_ON; \ + } \ +} while (0) + +// +// pin configuration +// + +#ifndef FAUXCLICKY_CPU_PRESCALER +#define FAUXCLICKY_CPU_PRESCALER 8 +#endif + +#ifndef FAUXCLICKY_ENABLE_OUTPUT +#define FAUXCLICKY_ENABLE_OUTPUT TCCR3A |= _BV(COM3A1); +#endif + +#ifndef FAUXCLICKY_DISABLE_OUTPUT +#define FAUXCLICKY_DISABLE_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0)); +#endif + +#ifndef FAUXCLICKY_TIMER_PERIOD +#define FAUXCLICKY_TIMER_PERIOD ICR3 +#endif + +#ifndef FAUXCLICKY_DUTY_CYCLE +#define FAUXCLICKY_DUTY_CYCLE OCR3A +#endif + +// +// definitions +// + +void fauxclicky_init(void); +void fauxclicky_stop(void); +void fauxclicky_play(float note[2]); +void fauxclicky_check(void); + diff --git a/quantum/keymap_common.c b/quantum/keymap_common.c index 54b872d49..002eabd85 100644 --- a/quantum/keymap_common.c +++ b/quantum/keymap_common.c @@ -119,6 +119,9 @@ action_t action_for_key(uint8_t layer, keypos_t key) mod = keycode & 0xFF; action.code = ACTION_MODS_ONESHOT(mod); break; + case QK_LAYER_TAP_TOGGLE ... QK_LAYER_TAP_TOGGLE_MAX: + action.code = ACTION_LAYER_TAP_TOGGLE(keycode & 0xFF); + break; case QK_MOD_TAP ... QK_MOD_TAP_MAX: action.code = ACTION_MODS_TAP_KEY((keycode >> 0x8) & 0x1F, keycode & 0xFF); break; diff --git a/quantum/keymap_extras/keymap_french.h b/quantum/keymap_extras/keymap_french.h index 834c69650..401bbdf64 100644 --- a/quantum/keymap_extras/keymap_french.h +++ b/quantum/keymap_extras/keymap_french.h @@ -4,7 +4,9 @@ #include "keymap.h" // Alt gr +#ifndef ALGR #define ALGR(kc) RALT(kc) +#endif #define NO_ALGR KC_RALT // Normal characters @@ -72,7 +74,7 @@ #define FR_PIPE ALGR(KC_6) #define FR_GRV ALGR(KC_7) #define FR_BSLS ALGR(KC_8) -#define FR_CIRC ALGR(KC_9) +#define FR_CCIRC ALGR(KC_9) #define FR_AT ALGR(KC_0) #define FR_RBRC ALGR(FR_RPRN) #define FR_RCBR ALGR(FR_EQL) diff --git a/quantum/process_keycode/process_ucis.c b/quantum/process_keycode/process_ucis.c new file mode 100644 index 000000000..4ad2533b0 --- /dev/null +++ b/quantum/process_keycode/process_ucis.c @@ -0,0 +1,133 @@ +#include "process_ucis.h" + +qk_ucis_state_t qk_ucis_state; + +void qk_ucis_start(void) { + qk_ucis_state.count = 0; + qk_ucis_state.in_progress = true; + + qk_ucis_start_user(); +} + +__attribute__((weak)) +void qk_ucis_start_user(void) { + unicode_input_start(); + register_hex(0x2328); + unicode_input_finish(); +} + +static bool is_uni_seq(char *seq) { + uint8_t i; + + for (i = 0; seq[i]; i++) { + uint16_t code; + if (('1' <= seq[i]) && (seq[i] <= '0')) + code = seq[i] - '1' + KC_1; + else + code = seq[i] - 'a' + KC_A; + + if (i > qk_ucis_state.count || qk_ucis_state.codes[i] != code) + return false; + } + + return (qk_ucis_state.codes[i] == KC_ENT || + qk_ucis_state.codes[i] == KC_SPC); +} + +__attribute__((weak)) +void qk_ucis_symbol_fallback (void) { + for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) { + uint8_t code = qk_ucis_state.codes[i]; + register_code(code); + unregister_code(code); + wait_ms(UNICODE_TYPE_DELAY); + } +} + +void register_ucis(const char *hex) { + for(int i = 0; hex[i]; i++) { + uint8_t kc = 0; + char c = hex[i]; + + switch (c) { + case '0': + kc = KC_0; + break; + case '1' ... '9': + kc = c - '1' + KC_1; + break; + case 'a' ... 'f': + kc = c - 'a' + KC_A; + break; + case 'A' ... 'F': + kc = c - 'A' + KC_A; + break; + } + + if (kc) { + register_code (kc); + unregister_code (kc); + wait_ms (UNICODE_TYPE_DELAY); + } + } +} + +bool process_ucis (uint16_t keycode, keyrecord_t *record) { + uint8_t i; + + if (!qk_ucis_state.in_progress) + return true; + + if (qk_ucis_state.count >= UCIS_MAX_SYMBOL_LENGTH && + !(keycode == KC_BSPC || keycode == KC_ESC || keycode == KC_SPC || keycode == KC_ENT)) { + return false; + } + + if (!record->event.pressed) + return true; + + qk_ucis_state.codes[qk_ucis_state.count] = keycode; + qk_ucis_state.count++; + + if (keycode == KC_BSPC) { + if (qk_ucis_state.count >= 2) { + qk_ucis_state.count -= 2; + return true; + } else { + qk_ucis_state.count--; + return false; + } + } + + if (keycode == KC_ENT || keycode == KC_SPC || keycode == KC_ESC) { + bool symbol_found = false; + + for (i = qk_ucis_state.count; i > 0; i--) { + register_code (KC_BSPC); + unregister_code (KC_BSPC); + wait_ms(UNICODE_TYPE_DELAY); + } + + if (keycode == KC_ESC) { + qk_ucis_state.in_progress = false; + return false; + } + + unicode_input_start(); + for (i = 0; ucis_symbol_table[i].symbol; i++) { + if (is_uni_seq (ucis_symbol_table[i].symbol)) { + symbol_found = true; + register_ucis(ucis_symbol_table[i].code + 2); + break; + } + } + if (!symbol_found) { + qk_ucis_symbol_fallback(); + } + unicode_input_finish(); + + qk_ucis_state.in_progress = false; + return false; + } + return true; +}
\ No newline at end of file diff --git a/quantum/process_keycode/process_ucis.h b/quantum/process_keycode/process_ucis.h new file mode 100644 index 000000000..4332f57b3 --- /dev/null +++ b/quantum/process_keycode/process_ucis.h @@ -0,0 +1,35 @@ +#ifndef PROCESS_UCIS_H +#define PROCESS_UCIS_H + +#include "quantum.h" +#include "process_unicode_common.h" + +#ifndef UCIS_MAX_SYMBOL_LENGTH +#define UCIS_MAX_SYMBOL_LENGTH 32 +#endif + +typedef struct { + char *symbol; + char *code; +} qk_ucis_symbol_t; + +typedef struct { + uint8_t count; + uint16_t codes[UCIS_MAX_SYMBOL_LENGTH]; + bool in_progress:1; +} qk_ucis_state_t; + +extern qk_ucis_state_t qk_ucis_state; + +#define UCIS_TABLE(...) {__VA_ARGS__, {NULL, NULL}} +#define UCIS_SYM(name, code) {name, #code} + +extern const qk_ucis_symbol_t ucis_symbol_table[]; + +void qk_ucis_start(void); +void qk_ucis_start_user(void); +void qk_ucis_symbol_fallback (void); +void register_ucis(const char *hex); +bool process_ucis (uint16_t keycode, keyrecord_t *record); + +#endif diff --git a/quantum/process_keycode/process_unicode.c b/quantum/process_keycode/process_unicode.c index 9d01a592d..ccae6fdca 100644 --- a/quantum/process_keycode/process_unicode.c +++ b/quantum/process_keycode/process_unicode.c @@ -1,103 +1,6 @@ #include "process_unicode.h" #include "action_util.h" -static uint8_t input_mode; -uint8_t mods; - -__attribute__((weak)) -uint16_t hex_to_keycode(uint8_t hex) -{ - if (hex == 0x0) { - return KC_0; - } else if (hex < 0xA) { - return KC_1 + (hex - 0x1); - } else { - return KC_A + (hex - 0xA); - } -} - -void set_unicode_input_mode(uint8_t os_target) -{ - input_mode = os_target; -} - -uint8_t get_unicode_input_mode(void) { - return input_mode; -} - -__attribute__((weak)) -void unicode_input_start (void) { - // save current mods - mods = keyboard_report->mods; - - // unregister all mods to start from clean state - if (mods & MOD_BIT(KC_LSFT)) unregister_code(KC_LSFT); - if (mods & MOD_BIT(KC_RSFT)) unregister_code(KC_RSFT); - if (mods & MOD_BIT(KC_LCTL)) unregister_code(KC_LCTL); - if (mods & MOD_BIT(KC_RCTL)) unregister_code(KC_RCTL); - if (mods & MOD_BIT(KC_LALT)) unregister_code(KC_LALT); - if (mods & MOD_BIT(KC_RALT)) unregister_code(KC_RALT); - if (mods & MOD_BIT(KC_LGUI)) unregister_code(KC_LGUI); - if (mods & MOD_BIT(KC_RGUI)) unregister_code(KC_RGUI); - - switch(input_mode) { - case UC_OSX: - register_code(KC_LALT); - break; - case UC_LNX: - register_code(KC_LCTL); - register_code(KC_LSFT); - register_code(KC_U); - unregister_code(KC_U); - unregister_code(KC_LSFT); - unregister_code(KC_LCTL); - break; - case UC_WIN: - register_code(KC_LALT); - register_code(KC_PPLS); - unregister_code(KC_PPLS); - break; - case UC_WINC: - register_code(KC_RALT); - unregister_code(KC_RALT); - register_code(KC_U); - unregister_code(KC_U); - } - wait_ms(UNICODE_TYPE_DELAY); -} - -__attribute__((weak)) -void unicode_input_finish (void) { - switch(input_mode) { - case UC_OSX: - case UC_WIN: - unregister_code(KC_LALT); - break; - case UC_LNX: - register_code(KC_SPC); - unregister_code(KC_SPC); - break; - } - - // reregister previously set mods - if (mods & MOD_BIT(KC_LSFT)) register_code(KC_LSFT); - if (mods & MOD_BIT(KC_RSFT)) register_code(KC_RSFT); - if (mods & MOD_BIT(KC_LCTL)) register_code(KC_LCTL); - if (mods & MOD_BIT(KC_RCTL)) register_code(KC_RCTL); - if (mods & MOD_BIT(KC_LALT)) register_code(KC_LALT); - if (mods & MOD_BIT(KC_RALT)) register_code(KC_RALT); - if (mods & MOD_BIT(KC_LGUI)) register_code(KC_LGUI); - if (mods & MOD_BIT(KC_RGUI)) register_code(KC_RGUI); -} - -void register_hex(uint16_t hex) { - for(int i = 3; i >= 0; i--) { - uint8_t digit = ((hex >> (i*4)) & 0xF); - register_code(hex_to_keycode(digit)); - unregister_code(hex_to_keycode(digit)); - } -} - bool process_unicode(uint16_t keycode, keyrecord_t *record) { if (keycode > QK_UNICODE && record->event.pressed) { uint16_t unicode = keycode & 0x7FFF; @@ -108,191 +11,3 @@ bool process_unicode(uint16_t keycode, keyrecord_t *record) { return true; } -#ifdef UNICODEMAP_ENABLE -__attribute__((weak)) -const uint32_t PROGMEM unicode_map[] = { -}; - -void register_hex32(uint32_t hex) { - uint8_t onzerostart = 1; - for(int i = 7; i >= 0; i--) { - if (i <= 3) { - onzerostart = 0; - } - uint8_t digit = ((hex >> (i*4)) & 0xF); - if (digit == 0) { - if (onzerostart == 0) { - register_code(hex_to_keycode(digit)); - unregister_code(hex_to_keycode(digit)); - } - } else { - register_code(hex_to_keycode(digit)); - unregister_code(hex_to_keycode(digit)); - onzerostart = 0; - } - } -} - -__attribute__((weak)) -void unicode_map_input_error() {} - -bool process_unicode_map(uint16_t keycode, keyrecord_t *record) { - if ((keycode & QK_UNICODE_MAP) == QK_UNICODE_MAP && record->event.pressed) { - const uint32_t* map = unicode_map; - uint16_t index = keycode - QK_UNICODE_MAP; - uint32_t code = pgm_read_dword_far(&map[index]); - if (code > 0xFFFF && code <= 0x10ffff && input_mode == UC_OSX) { - // Convert to UTF-16 surrogate pair - code -= 0x10000; - uint32_t lo = code & 0x3ff; - uint32_t hi = (code & 0xffc00) >> 10; - unicode_input_start(); - register_hex32(hi + 0xd800); - register_hex32(lo + 0xdc00); - unicode_input_finish(); - } else if ((code > 0x10ffff && input_mode == UC_OSX) || (code > 0xFFFFF && input_mode == UC_LNX)) { - // when character is out of range supported by the OS - unicode_map_input_error(); - } else { - unicode_input_start(); - register_hex32(code); - unicode_input_finish(); - } - } - return true; -} -#endif - -#ifdef UCIS_ENABLE -qk_ucis_state_t qk_ucis_state; - -void qk_ucis_start(void) { - qk_ucis_state.count = 0; - qk_ucis_state.in_progress = true; - - qk_ucis_start_user(); -} - -__attribute__((weak)) -void qk_ucis_start_user(void) { - unicode_input_start(); - register_hex(0x2328); - unicode_input_finish(); -} - -static bool is_uni_seq(char *seq) { - uint8_t i; - - for (i = 0; seq[i]; i++) { - uint16_t code; - if (('1' <= seq[i]) && (seq[i] <= '0')) - code = seq[i] - '1' + KC_1; - else - code = seq[i] - 'a' + KC_A; - - if (i > qk_ucis_state.count || qk_ucis_state.codes[i] != code) - return false; - } - - return (qk_ucis_state.codes[i] == KC_ENT || - qk_ucis_state.codes[i] == KC_SPC); -} - -__attribute__((weak)) -void qk_ucis_symbol_fallback (void) { - for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) { - uint8_t code = qk_ucis_state.codes[i]; - register_code(code); - unregister_code(code); - wait_ms(UNICODE_TYPE_DELAY); - } -} - -void register_ucis(const char *hex) { - for(int i = 0; hex[i]; i++) { - uint8_t kc = 0; - char c = hex[i]; - - switch (c) { - case '0': - kc = KC_0; - break; - case '1' ... '9': - kc = c - '1' + KC_1; - break; - case 'a' ... 'f': - kc = c - 'a' + KC_A; - break; - case 'A' ... 'F': - kc = c - 'A' + KC_A; - break; - } - - if (kc) { - register_code (kc); - unregister_code (kc); - wait_ms (UNICODE_TYPE_DELAY); - } - } -} - -bool process_ucis (uint16_t keycode, keyrecord_t *record) { - uint8_t i; - - if (!qk_ucis_state.in_progress) - return true; - - if (qk_ucis_state.count >= UCIS_MAX_SYMBOL_LENGTH && - !(keycode == KC_BSPC || keycode == KC_ESC || keycode == KC_SPC || keycode == KC_ENT)) { - return false; - } - - if (!record->event.pressed) - return true; - - qk_ucis_state.codes[qk_ucis_state.count] = keycode; - qk_ucis_state.count++; - - if (keycode == KC_BSPC) { - if (qk_ucis_state.count >= 2) { - qk_ucis_state.count -= 2; - return true; - } else { - qk_ucis_state.count--; - return false; - } - } - - if (keycode == KC_ENT || keycode == KC_SPC || keycode == KC_ESC) { - bool symbol_found = false; - - for (i = qk_ucis_state.count; i > 0; i--) { - register_code (KC_BSPC); - unregister_code (KC_BSPC); - wait_ms(UNICODE_TYPE_DELAY); - } - - if (keycode == KC_ESC) { - qk_ucis_state.in_progress = false; - return false; - } - - unicode_input_start(); - for (i = 0; ucis_symbol_table[i].symbol; i++) { - if (is_uni_seq (ucis_symbol_table[i].symbol)) { - symbol_found = true; - register_ucis(ucis_symbol_table[i].code + 2); - break; - } - } - if (!symbol_found) { - qk_ucis_symbol_fallback(); - } - unicode_input_finish(); - - qk_ucis_state.in_progress = false; - return false; - } - return true; -} -#endif diff --git a/quantum/process_keycode/process_unicode.h b/quantum/process_keycode/process_unicode.h index f17cfa6cf..4c21f11eb 100644 --- a/quantum/process_keycode/process_unicode.h +++ b/quantum/process_keycode/process_unicode.h @@ -2,166 +2,8 @@ #define PROCESS_UNICODE_H #include "quantum.h" - -#define UC_OSX 0 // Mac OS X -#define UC_LNX 1 // Linux -#define UC_WIN 2 // Windows 'HexNumpad' -#define UC_BSD 3 // BSD (not implemented) -#define UC_WINC 4 // WinCompose https://github.com/samhocevar/wincompose - -#ifndef UNICODE_TYPE_DELAY -#define UNICODE_TYPE_DELAY 10 -#endif - -void set_unicode_input_mode(uint8_t os_target); -uint8_t get_unicode_input_mode(void); -void unicode_input_start(void); -void unicode_input_finish(void); -void register_hex(uint16_t hex); +#include "process_unicode_common.h" bool process_unicode(uint16_t keycode, keyrecord_t *record); -#ifdef UNICODEMAP_ENABLE -void unicode_map_input_error(void); -bool process_unicode_map(uint16_t keycode, keyrecord_t *record); -#endif - -#ifdef UCIS_ENABLE -#ifndef UCIS_MAX_SYMBOL_LENGTH -#define UCIS_MAX_SYMBOL_LENGTH 32 -#endif - -typedef struct { - char *symbol; - char *code; -} qk_ucis_symbol_t; - -typedef struct { - uint8_t count; - uint16_t codes[UCIS_MAX_SYMBOL_LENGTH]; - bool in_progress:1; -} qk_ucis_state_t; - -extern qk_ucis_state_t qk_ucis_state; - -#define UCIS_TABLE(...) {__VA_ARGS__, {NULL, NULL}} -#define UCIS_SYM(name, code) {name, #code} - -extern const qk_ucis_symbol_t ucis_symbol_table[]; - -void qk_ucis_start(void); -void qk_ucis_start_user(void); -void qk_ucis_symbol_fallback (void); -void register_ucis(const char *hex); -bool process_ucis (uint16_t keycode, keyrecord_t *record); - -#endif - -#define UC_BSPC UC(0x0008) - -#define UC_SPC UC(0x0020) - -#define UC_EXLM UC(0x0021) -#define UC_DQUT UC(0x0022) -#define UC_HASH UC(0x0023) -#define UC_DLR UC(0x0024) -#define UC_PERC UC(0x0025) -#define UC_AMPR UC(0x0026) -#define UC_QUOT UC(0x0027) -#define UC_LPRN UC(0x0028) -#define UC_RPRN UC(0x0029) -#define UC_ASTR UC(0x002A) -#define UC_PLUS UC(0x002B) -#define UC_COMM UC(0x002C) -#define UC_DASH UC(0x002D) -#define UC_DOT UC(0x002E) -#define UC_SLSH UC(0x002F) - -#define UC_0 UC(0x0030) -#define UC_1 UC(0x0031) -#define UC_2 UC(0x0032) -#define UC_3 UC(0x0033) -#define UC_4 UC(0x0034) -#define UC_5 UC(0x0035) -#define UC_6 UC(0x0036) -#define UC_7 UC(0x0037) -#define UC_8 UC(0x0038) -#define UC_9 UC(0x0039) - -#define UC_COLN UC(0x003A) -#define UC_SCLN UC(0x003B) -#define UC_LT UC(0x003C) -#define UC_EQL UC(0x003D) -#define UC_GT UC(0x003E) -#define UC_QUES UC(0x003F) -#define UC_AT UC(0x0040) - -#define UC_A UC(0x0041) -#define UC_B UC(0x0042) -#define UC_C UC(0x0043) -#define UC_D UC(0x0044) -#define UC_E UC(0x0045) -#define UC_F UC(0x0046) -#define UC_G UC(0x0047) -#define UC_H UC(0x0048) -#define UC_I UC(0x0049) -#define UC_J UC(0x004A) -#define UC_K UC(0x004B) -#define UC_L UC(0x004C) -#define UC_M UC(0x004D) -#define UC_N UC(0x004E) -#define UC_O UC(0x004F) -#define UC_P UC(0x0050) -#define UC_Q UC(0x0051) -#define UC_R UC(0x0052) -#define UC_S UC(0x0053) -#define UC_T UC(0x0054) -#define UC_U UC(0x0055) -#define UC_V UC(0x0056) -#define UC_W UC(0x0057) -#define UC_X UC(0x0058) -#define UC_Y UC(0x0059) -#define UC_Z UC(0x005A) - -#define UC_LBRC UC(0x005B) -#define UC_BSLS UC(0x005C) -#define UC_RBRC UC(0x005D) -#define UC_CIRM UC(0x005E) -#define UC_UNDR UC(0x005F) - -#define UC_GRV UC(0x0060) - -#define UC_a UC(0x0061) -#define UC_b UC(0x0062) -#define UC_c UC(0x0063) -#define UC_d UC(0x0064) -#define UC_e UC(0x0065) -#define UC_f UC(0x0066) -#define UC_g UC(0x0067) -#define UC_h UC(0x0068) -#define UC_i UC(0x0069) -#define UC_j UC(0x006A) -#define UC_k UC(0x006B) -#define UC_l UC(0x006C) -#define UC_m UC(0x006D) -#define UC_n UC(0x006E) -#define UC_o UC(0x006F) -#define UC_p UC(0x0070) -#define UC_q UC(0x0071) -#define UC_r UC(0x0072) -#define UC_s UC(0x0073) -#define UC_t UC(0x0074) -#define UC_u UC(0x0075) -#define UC_v UC(0x0076) -#define UC_w UC(0x0077) -#define UC_x UC(0x0078) -#define UC_y UC(0x0079) -#define UC_z UC(0x007A) - -#define UC_LCBR UC(0x007B) -#define UC_PIPE UC(0x007C) -#define UC_RCBR UC(0x007D) -#define UC_TILD UC(0x007E) -#define UC_DEL UC(0x007F) - #endif diff --git a/quantum/process_keycode/process_unicode_common.c b/quantum/process_keycode/process_unicode_common.c new file mode 100644 index 000000000..31bc3b7ab --- /dev/null +++ b/quantum/process_keycode/process_unicode_common.c @@ -0,0 +1,85 @@ +#include "process_unicode_common.h" + +uint8_t mods; + +void set_unicode_input_mode(uint8_t os_target) +{ + input_mode = os_target; +} + +uint8_t get_unicode_input_mode(void) { + return input_mode; +} + +__attribute__((weak)) +void unicode_input_start (void) { + // save current mods + mods = keyboard_report->mods; + + // unregister all mods to start from clean state + if (mods & MOD_BIT(KC_LSFT)) unregister_code(KC_LSFT); + if (mods & MOD_BIT(KC_RSFT)) unregister_code(KC_RSFT); + if (mods & MOD_BIT(KC_LCTL)) unregister_code(KC_LCTL); + if (mods & MOD_BIT(KC_RCTL)) unregister_code(KC_RCTL); + if (mods & MOD_BIT(KC_LALT)) unregister_code(KC_LALT); + if (mods & MOD_BIT(KC_RALT)) unregister_code(KC_RALT); + if (mods & MOD_BIT(KC_LGUI)) unregister_code(KC_LGUI); + if (mods & MOD_BIT(KC_RGUI)) unregister_code(KC_RGUI); + + switch(input_mode) { + case UC_OSX: + register_code(KC_LALT); + break; + case UC_LNX: + register_code(KC_LCTL); + register_code(KC_LSFT); + register_code(KC_U); + unregister_code(KC_U); + unregister_code(KC_LSFT); + unregister_code(KC_LCTL); + break; + case UC_WIN: + register_code(KC_LALT); + register_code(KC_PPLS); + unregister_code(KC_PPLS); + break; + case UC_WINC: + register_code(KC_RALT); + unregister_code(KC_RALT); + register_code(KC_U); + unregister_code(KC_U); + } + wait_ms(UNICODE_TYPE_DELAY); +} + +__attribute__((weak)) +void unicode_input_finish (void) { + switch(input_mode) { + case UC_OSX: + case UC_WIN: + unregister_code(KC_LALT); + break; + case UC_LNX: + register_code(KC_SPC); + unregister_code(KC_SPC); + break; + } + + // reregister previously set mods + if (mods & MOD_BIT(KC_LSFT)) register_code(KC_LSFT); + if (mods & MOD_BIT(KC_RSFT)) register_code(KC_RSFT); + if (mods & MOD_BIT(KC_LCTL)) register_code(KC_LCTL); + if (mods & MOD_BIT(KC_RCTL)) register_code(KC_RCTL); + if (mods & MOD_BIT(KC_LALT)) register_code(KC_LALT); + if (mods & MOD_BIT(KC_RALT)) register_code(KC_RALT); + if (mods & MOD_BIT(KC_LGUI)) register_code(KC_LGUI); + if (mods & MOD_BIT(KC_RGUI)) register_code(KC_RGUI); +} + +void register_hex(uint16_t hex) { + for(int i = 3; i >= 0; i--) { + uint8_t digit = ((hex >> (i*4)) & 0xF); + register_code(hex_to_keycode(digit)); + unregister_code(hex_to_keycode(digit)); + } +}
\ No newline at end of file diff --git a/quantum/process_keycode/process_unicode_common.h b/quantum/process_keycode/process_unicode_common.h new file mode 100644 index 000000000..864693cdd --- /dev/null +++ b/quantum/process_keycode/process_unicode_common.h @@ -0,0 +1,132 @@ +#ifndef PROCESS_UNICODE_COMMON_H +#define PROCESS_UNICODE_COMMON_H + +#include "quantum.h" + +#ifndef UNICODE_TYPE_DELAY +#define UNICODE_TYPE_DELAY 10 +#endif + +__attribute__ ((unused)) +static uint8_t input_mode; + +void set_unicode_input_mode(uint8_t os_target); +uint8_t get_unicode_input_mode(void); +void unicode_input_start(void); +void unicode_input_finish(void); +void register_hex(uint16_t hex); + +#define UC_OSX 0 // Mac OS X +#define UC_LNX 1 // Linux +#define UC_WIN 2 // Windows 'HexNumpad' +#define UC_BSD 3 // BSD (not implemented) +#define UC_WINC 4 // WinCompose https://github.com/samhocevar/wincompose + +#define UC_BSPC UC(0x0008) + +#define UC_SPC UC(0x0020) + +#define UC_EXLM UC(0x0021) +#define UC_DQUT UC(0x0022) +#define UC_HASH UC(0x0023) +#define UC_DLR UC(0x0024) +#define UC_PERC UC(0x0025) +#define UC_AMPR UC(0x0026) +#define UC_QUOT UC(0x0027) +#define UC_LPRN UC(0x0028) +#define UC_RPRN UC(0x0029) +#define UC_ASTR UC(0x002A) +#define UC_PLUS UC(0x002B) +#define UC_COMM UC(0x002C) +#define UC_DASH UC(0x002D) +#define UC_DOT UC(0x002E) +#define UC_SLSH UC(0x002F) + +#define UC_0 UC(0x0030) +#define UC_1 UC(0x0031) +#define UC_2 UC(0x0032) +#define UC_3 UC(0x0033) +#define UC_4 UC(0x0034) +#define UC_5 UC(0x0035) +#define UC_6 UC(0x0036) +#define UC_7 UC(0x0037) +#define UC_8 UC(0x0038) +#define UC_9 UC(0x0039) + +#define UC_COLN UC(0x003A) +#define UC_SCLN UC(0x003B) +#define UC_LT UC(0x003C) +#define UC_EQL UC(0x003D) +#define UC_GT UC(0x003E) +#define UC_QUES UC(0x003F) +#define UC_AT UC(0x0040) + +#define UC_A UC(0x0041) +#define UC_B UC(0x0042) +#define UC_C UC(0x0043) +#define UC_D UC(0x0044) +#define UC_E UC(0x0045) +#define UC_F UC(0x0046) +#define UC_G UC(0x0047) +#define UC_H UC(0x0048) +#define UC_I UC(0x0049) +#define UC_J UC(0x004A) +#define UC_K UC(0x004B) +#define UC_L UC(0x004C) +#define UC_M UC(0x004D) +#define UC_N UC(0x004E) +#define UC_O UC(0x004F) +#define UC_P UC(0x0050) +#define UC_Q UC(0x0051) +#define UC_R UC(0x0052) +#define UC_S UC(0x0053) +#define UC_T UC(0x0054) +#define UC_U UC(0x0055) +#define UC_V UC(0x0056) +#define UC_W UC(0x0057) +#define UC_X UC(0x0058) +#define UC_Y UC(0x0059) +#define UC_Z UC(0x005A) + +#define UC_LBRC UC(0x005B) +#define UC_BSLS UC(0x005C) +#define UC_RBRC UC(0x005D) +#define UC_CIRM UC(0x005E) +#define UC_UNDR UC(0x005F) + +#define UC_GRV UC(0x0060) + +#define UC_a UC(0x0061) +#define UC_b UC(0x0062) +#define UC_c UC(0x0063) +#define UC_d UC(0x0064) +#define UC_e UC(0x0065) +#define UC_f UC(0x0066) +#define UC_g UC(0x0067) +#define UC_h UC(0x0068) +#define UC_i UC(0x0069) +#define UC_j UC(0x006A) +#define UC_k UC(0x006B) +#define UC_l UC(0x006C) +#define UC_m UC(0x006D) +#define UC_n UC(0x006E) +#define UC_o UC(0x006F) +#define UC_p UC(0x0070) +#define UC_q UC(0x0071) +#define UC_r UC(0x0072) +#define UC_s UC(0x0073) +#define UC_t UC(0x0074) +#define UC_u UC(0x0075) +#define UC_v UC(0x0076) +#define UC_w UC(0x0077) +#define UC_x UC(0x0078) +#define UC_y UC(0x0079) +#define UC_z UC(0x007A) + +#define UC_LCBR UC(0x007B) +#define UC_PIPE UC(0x007C) +#define UC_RCBR UC(0x007D) +#define UC_TILD UC(0x007E) +#define UC_DEL UC(0x007F) + +#endif
\ No newline at end of file diff --git a/quantum/process_keycode/process_unicodemap.c b/quantum/process_keycode/process_unicodemap.c new file mode 100644 index 000000000..68a593a18 --- /dev/null +++ b/quantum/process_keycode/process_unicodemap.c @@ -0,0 +1,56 @@ +#include "process_unicodemap.h" +#include "process_unicode_common.h" + +__attribute__((weak)) +const uint32_t PROGMEM unicode_map[] = { +}; + +void register_hex32(uint32_t hex) { + bool onzerostart = true; + for(int i = 7; i >= 0; i--) { + if (i <= 3) { + onzerostart = false; + } + uint8_t digit = ((hex >> (i*4)) & 0xF); + if (digit == 0) { + if (!onzerostart) { + register_code(hex_to_keycode(digit)); + unregister_code(hex_to_keycode(digit)); + } + } else { + register_code(hex_to_keycode(digit)); + unregister_code(hex_to_keycode(digit)); + onzerostart = false; + } + } +} + +__attribute__((weak)) +void unicode_map_input_error() {} + +bool process_unicode_map(uint16_t keycode, keyrecord_t *record) { + uint8_t input_mode = get_unicode_input_mode(); + if ((keycode & QK_UNICODE_MAP) == QK_UNICODE_MAP && record->event.pressed) { + const uint32_t* map = unicode_map; + uint16_t index = keycode - QK_UNICODE_MAP; + uint32_t code = pgm_read_dword_far(&map[index]); + if (code > 0xFFFF && code <= 0x10ffff && input_mode == UC_OSX) { + // Convert to UTF-16 surrogate pair + code -= 0x10000; + uint32_t lo = code & 0x3ff; + uint32_t hi = (code & 0xffc00) >> 10; + unicode_input_start(); + register_hex32(hi + 0xd800); + register_hex32(lo + 0xdc00); + unicode_input_finish(); + } else if ((code > 0x10ffff && input_mode == UC_OSX) || (code > 0xFFFFF && input_mode == UC_LNX)) { + // when character is out of range supported by the OS + unicode_map_input_error(); + } else { + unicode_input_start(); + register_hex32(code); + unicode_input_finish(); + } + } + return true; +}
\ No newline at end of file diff --git a/quantum/process_keycode/process_unicodemap.h b/quantum/process_keycode/process_unicodemap.h new file mode 100644 index 000000000..64a7a0109 --- /dev/null +++ b/quantum/process_keycode/process_unicodemap.h @@ -0,0 +1,9 @@ +#ifndef PROCESS_UNICODEMAP_H +#define PROCESS_UNICODEMAP_H + +#include "quantum.h" +#include "process_unicode_common.h" + +void unicode_map_input_error(void); +bool process_unicode_map(uint16_t keycode, keyrecord_t *record); +#endif
\ No newline at end of file diff --git a/quantum/quantum.c b/quantum/quantum.c index 45ea8cb73..4a6d0355f 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -7,6 +7,10 @@ #define TAPPING_TERM 200 #endif +#ifdef FAUXCLICKY_ENABLE +#include "fauxclicky.h" +#endif + static void do_code16 (uint16_t code, void (*f) (uint8_t)) { switch (code) { case QK_MODS ... QK_MODS_MAX: @@ -196,6 +200,26 @@ bool process_record_quantum(keyrecord_t *record) { } return false; break; + #ifdef FAUXCLICKY_ENABLE + case FC_TOG: + if (record->event.pressed) { + FAUXCLICKY_TOGGLE; + } + return false; + break; + case FC_ON: + if (record->event.pressed) { + FAUXCLICKY_ON; + } + return false; + break; + case FC_OFF: + if (record->event.pressed) { + FAUXCLICKY_OFF; + } + return false; + break; + #endif #ifdef RGBLIGHT_ENABLE case RGB_TOG: if (record->event.pressed) { @@ -948,6 +972,19 @@ void send_nibble(uint8_t number) { } } + +__attribute__((weak)) +uint16_t hex_to_keycode(uint8_t hex) +{ + if (hex == 0x0) { + return KC_0; + } else if (hex < 0xA) { + return KC_1 + (hex - 0x1); + } else { + return KC_A + (hex - 0xA); + } +} + void api_send_unicode(uint32_t unicode) { #ifdef API_ENABLE uint8_t chunk[4]; diff --git a/quantum/quantum.h b/quantum/quantum.h index 18f072189..580d51202 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -56,6 +56,14 @@ extern uint32_t default_layer_state; #include "process_unicode.h" #endif +#ifdef UCIS_ENABLE + #include "process_ucis.h" +#endif + +#ifdef UNICODEMAP_ENABLE + #include "process_unicodemap.h" +#endif + #include "process_tap_dance.h" #ifdef PRINTING_ENABLE @@ -117,7 +125,7 @@ void send_dword(uint32_t number); void send_word(uint16_t number); void send_byte(uint8_t number); void send_nibble(uint8_t number); - +uint16_t hex_to_keycode(uint8_t hex); void led_set_user(uint8_t usb_led); void led_set_kb(uint8_t usb_led); diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index ab2e79026..903d57f1e 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -41,16 +41,21 @@ enum quantum_keycodes { #endif QK_TAP_DANCE = 0x5700, QK_TAP_DANCE_MAX = 0x57FF, -#ifdef UNICODEMAP_ENABLE - QK_UNICODE_MAP = 0x5800, - QK_UNICODE_MAP_MAX = 0x5BFF, -#endif + QK_LAYER_TAP_TOGGLE = 0x5800, + QK_LAYER_TAP_TOGGLE_MAX = 0x58FF, QK_MOD_TAP = 0x6000, QK_MOD_TAP_MAX = 0x7FFF, +#if defined(UNICODEMAP_ENABLE) && defined(UNICODE_ENABLE) + #error "Cannot enable both UNICODEMAP && UNICODE" +#endif #ifdef UNICODE_ENABLE QK_UNICODE = 0x8000, QK_UNICODE_MAX = 0xFFFF, #endif +#ifdef UNICODEMAP_ENABLE + QK_UNICODE_MAP = 0x8000, + QK_UNICODE_MAP_MAX = 0x83FF, +#endif // Loose keycodes - to be used directly @@ -86,6 +91,13 @@ enum quantum_keycodes { AU_OFF, AU_TOG, +#ifdef FAUXCLICKY_ENABLE + // Faux clicky + FC_ON, + FC_OFF, + FC_TOG, +#endif + // Music mode on/off/toggle MU_ON, MU_OFF, @@ -171,6 +183,7 @@ enum quantum_keycodes { #define ALTG(kc) (kc | QK_RCTL | QK_RALT) #define SCMD(kc) (kc | QK_LGUI | QK_LSFT) #define SWIN(kc) SCMD(kc) +#define LCA(kc) (kc | QK_LCTL | QK_LALT) #define MOD_HYPR 0xf #define MOD_MEH 0x7 @@ -297,6 +310,9 @@ enum quantum_keycodes { // One-shot mod #define OSM(mod) (mod | QK_ONE_SHOT_MOD) +// Layer tap-toggle +#define TT(layer) (layer | QK_LAYER_TAP_TOGGLE) + // M-od, T-ap - 256 keycode max #define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0x1F) << 8)) @@ -324,6 +340,7 @@ enum quantum_keycodes { #define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ #define SCMD_T(kc) MT((MOD_LGUI | MOD_LSFT), kc) #define SWIN_T(kc) SCMD_T(kc) +#define LCA_T(kc) MT((MOD_LCTL | MOD_LALT), kc) // Left control and left alt // Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap #define KC_HYPR HYPR(KC_NO) diff --git a/quantum/template/rules.mk b/quantum/template/rules.mk index 55898147d..bad3387bf 100644 --- a/quantum/template/rules.mk +++ b/quantum/template/rules.mk @@ -65,3 +65,4 @@ MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index f03670a7f..94de36918 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -33,6 +33,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "nodebug.h" #endif +#ifdef FAUXCLICKY_ENABLE +#include <fauxclicky.h> +#endif void action_exec(keyevent_t event) { @@ -41,6 +44,16 @@ void action_exec(keyevent_t event) dprint("EVENT: "); debug_event(event); dprintln(); } +#ifdef FAUXCLICKY_ENABLE + if (IS_PRESSED(event)) { + FAUXCLICKY_ACTION_PRESS; + } + if (IS_RELEASED(event)) { + FAUXCLICKY_ACTION_RELEASE; + } + fauxclicky_check(); +#endif + #ifdef ONEHAND_ENABLE if (!IS_NOEVENT(event)) { process_hand_swap(&event); diff --git a/tmk_core/common/action_layer.c b/tmk_core/common/action_layer.c index a3c757964..58d919a04 100644 --- a/tmk_core/common/action_layer.c +++ b/tmk_core/common/action_layer.c @@ -16,8 +16,14 @@ */ uint32_t default_layer_state = 0; +__attribute__((weak)) +uint32_t default_layer_state_set_kb(uint32_t state) { + return state; +} + static void default_layer_state_set(uint32_t state) { + state = default_layer_state_set_kb(state); debug("default_layer_state: "); default_layer_debug(); debug(" to "); default_layer_state = state; @@ -57,8 +63,14 @@ void default_layer_xor(uint32_t state) */ uint32_t layer_state = 0; +__attribute__((weak)) +uint32_t layer_state_set_kb(uint32_t state) { + return state; +} + static void layer_state_set(uint32_t state) { + state = layer_state_set_kb(state); dprint("layer_state: "); layer_debug(); dprint(" to "); layer_state = state; diff --git a/tmk_core/common/action_layer.h b/tmk_core/common/action_layer.h index 025cf5420..d89ed6e5c 100644 --- a/tmk_core/common/action_layer.h +++ b/tmk_core/common/action_layer.h @@ -29,6 +29,9 @@ extern uint32_t default_layer_state; void default_layer_debug(void); void default_layer_set(uint32_t state); +__attribute__((weak)) +uint32_t default_layer_state_set_kb(uint32_t state); + #ifndef NO_ACTION_LAYER /* bitwise operation */ void default_layer_or(uint32_t state); @@ -69,6 +72,8 @@ void layer_xor(uint32_t state); #define layer_xor(state) #define layer_debug() +__attribute__((weak)) +uint32_t layer_state_set_kb(uint32_t state); #endif /* pressed actions cache */ diff --git a/tmk_core/common/action_tapping.c b/tmk_core/common/action_tapping.c index e16e11be7..ff78d7f2a 100644 --- a/tmk_core/common/action_tapping.c +++ b/tmk_core/common/action_tapping.c @@ -257,7 +257,7 @@ bool process_tapping(keyrecord_t *keyp) return true; } } else { - if (!IS_NOEVENT(event)) debug("Tapping: other key just after tap.\n") {}; + if (!IS_NOEVENT(event)) debug("Tapping: other key just after tap.\n"); process_record(keyp); return true; } diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index 3aa82231b..eac1f1dd8 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -51,6 +51,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLIGHT_ENABLE # include "rgblight.h" #endif +#ifdef FAUXCLICKY_ENABLE +# include "fauxclicky.h" +#endif #ifdef SERIAL_LINK_ENABLE # include "serial_link/system/serial_link.h" #endif @@ -108,6 +111,9 @@ void keyboard_init(void) { #ifdef RGBLIGHT_ENABLE rgblight_init(); #endif +#ifdef FAUXCLICKY_ENABLE + fauxclicky_init(); +#endif #if defined(NKRO_ENABLE) && defined(FORCE_NKRO) keymap_config.nkro = 1; #endif diff --git a/util/install_dependencies.sh b/util/install_dependencies.sh index 936a86593..1b73a8b3b 100755 --- a/util/install_dependencies.sh +++ b/util/install_dependencies.sh @@ -92,4 +92,23 @@ elif [[ -n "$(type -P zypper)" ]]; then # TODO: The avr and eabi tools are not available as default packages, so we need # another way to install them +elif [[ -n "$(type -P pkg)" ]]; then + # FreeBSD + pkg update + pkg install -y \ + git \ + wget \ + gmake \ + gcc \ + zip \ + unzip \ + avr-binutils \ + avr-gcc \ + avr-libc \ + dfu-programmer \ + dfu-util \ + arm-none-eabi-gcc \ + arm-none-eabi-binutils \ + arm-none-eabi-newlib \ + diffutils fi diff --git a/util/travis_compiled_push.sh b/util/travis_compiled_push.sh index de2481ce5..58334cb1f 100644 --- a/util/travis_compiled_push.sh +++ b/util/travis_compiled_push.sh @@ -7,7 +7,7 @@ rev=$(git rev-parse --short HEAD) git config --global user.name "Travis CI" git config --global user.email "jack.humb+travis.ci@gmail.com" -if [[ "$TRAVIS_BRANCH" == "master" ]] ; then +if [[ "$TRAVIS_BRANCH" == "master" && "$TRAVIS_PULL_REQUEST" == "false" ]] ; then increment_version () { |