diff options
Diffstat (limited to 'Projects/SerialToLCD/SerialToLCD.txt')
-rw-r--r-- | Projects/SerialToLCD/SerialToLCD.txt | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/Projects/SerialToLCD/SerialToLCD.txt b/Projects/SerialToLCD/SerialToLCD.txt new file mode 100644 index 000000000..a2f339648 --- /dev/null +++ b/Projects/SerialToLCD/SerialToLCD.txt @@ -0,0 +1,109 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * \li AT90USB162 + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Communications Device Class (CDC)</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Abstract Control Model (ACM)</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF CDC Class Standard</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This + * project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial + * link, so that data supplied by the host can be written to the display. This project is + * designed to use the Minimum USB AVR board, however it can be modified to suit other hardware + * if desired. + * + * LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n + * More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n + * + * Below are the connections between the AVR Minimus board and LCD. + * + * <table> + * <tr> + * <td><b>AVR Pin:</b></td> + * <td><b>HD44780 LCD Pin:</b></td> + * </tr> + * <tr> + * <td>VCC</td> + * <td>VCC</td> + * </tr> + * <tr> + * <td>GND</td> + * <td>GND</td> + * </tr> + * <tr> + * <td>PD0</td> + * <td>DB4</td> + * </tr> + * <tr> + * <td>PD1</td> + * <td>DB5</td> + * </tr> + * <tr> + * <td>PD2</td> + * <td>DB6</td> + * </tr> + * <tr> + * <td>PD3</td> + * <td>DB7</td> + * </tr> + * <tr> + * <td>PD4</td> + * <td>/RS</td> + * </tr> + * <tr> + * <td>GND</td> + * <td>/RW</td> + * </tr> + * <tr> + * <td>PD7</td> + * <td>/E</td> + * </tr> + * </table> + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td> + * None + * </td> + * </tr> + * </table> + */ |