diff options
Diffstat (limited to 'converter/m0110_usb/README.md')
| -rw-r--r-- | converter/m0110_usb/README.md | 79 |
1 files changed, 0 insertions, 79 deletions
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md deleted file mode 100644 index bfd3261df..000000000 --- a/converter/m0110_usb/README.md +++ /dev/null @@ -1,79 +0,0 @@ -M0110/M0110A to USB keyboard converter -====================================== -This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. - -Read README of top directory too. - -Pictures of **M0110 + M0120** and **M0110A**. - - - - - -- M0110A support was contributed by [skagon@github](https://github.com/skagon). -- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys. - - - -Update ------- -- 2013/08: Change port for signals `PF` to `PD` -- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. -- 2014/06: Change keymaps -- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c) - - - -Building Hardware ------------------ -You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. - -[](http://i.imgur.com/4G2ZOeg.jpg) - -### 4P4C phone handset cable -Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. - -<http://en.wikipedia.org/wiki/Modular_connector#4P4C> - -Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. -[](http://i.imgur.com/3S9P1mY.jpg?1) - -[Teensy]: http://www.pjrc.com/teensy/ -[TMK converter]: https://github.com/tmk/keyboard_converter - - -### Socket Pinout -- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml> - - - - -### Pull-up Resistor -You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. - - - -Building Firmware ------------------ -To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap. - - $ git clone git://github.com/tmk/tmk_keyboard.git (or download source) - $ cd m0110_usb - $ make -f Makefile.rev2 clean - $ make -f Makefile.rev2 [KEYMAP={default|intl|spacefn|hasu}] - -Use `Maefile.tmk_rev1` for TMK converter Rev.1, `Makefile.teensy` for Teensy instead. - - - -Keymap ------- -To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. - - - -Debug ------ -You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Magic>+H` simultaneously to get help. - -- Magic combo: `Shift+Option+⌘` or `Shift+Option+Ctrl`(`Shift+Alt+Gui` or `Shift+Alt+Control`) |