diff options
Diffstat (limited to 'converter/serialmouse_usb')
| -rw-r--r-- | converter/serialmouse_usb/Makefile | 106 | ||||
| -rw-r--r-- | converter/serialmouse_usb/README.md | 11 | ||||
| -rw-r--r-- | converter/serialmouse_usb/config.h | 119 | ||||
| -rw-r--r-- | converter/serialmouse_usb/keymap.c | 33 | ||||
| -rw-r--r-- | converter/serialmouse_usb/keymap_common.c | 30 | ||||
| -rw-r--r-- | converter/serialmouse_usb/keymap_common.h | 174 | ||||
| -rw-r--r-- | converter/serialmouse_usb/led.c | 24 | ||||
| -rw-r--r-- | converter/serialmouse_usb/matrix.c | 83 |
8 files changed, 0 insertions, 580 deletions
diff --git a/converter/serialmouse_usb/Makefile b/converter/serialmouse_usb/Makefile deleted file mode 100644 index 34f550b31..000000000 --- a/converter/serialmouse_usb/Makefile +++ /dev/null @@ -1,106 +0,0 @@ -# -# Makefile for Teensy -# -# Target file name (without extension). -TARGET = serialmouse_usb - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# project specific files -SRC = keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -#COMMAND_ENABLE = yes # Commands for debug and configuration -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA - - -# Serial Mouse Options -# You can choose a mouse protocol and the implementation of -# the underlying serial connection. -# -SERIAL_MOUSE_MICROSOFT_ENABLE = yes # Enable support for Microsoft-compatible mice -#SERIAL_MOUSE_MOUSESYSTEMS_ENABLE = yes # Enable support for Mousesystems-compatible mice -#SERIAL_MOUSE_USE_UART = yes # use hardware UART for serial connection -SERIAL_MOUSE_USE_SOFT = yes # use software serial implementation - -# Optional serial mouse driver features -# Support scrolling while holding the middle mouse button -# (currently only supported for Mousesystems mice): -#OPT_DEFS += -DSERIAL_MOUSE_CENTER_SCROLL - -# Optimize size but this may cause error "relocation truncated to fit" -#EXTRALDFLAGS = -Wl,--relax - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - -include $(TMK_DIR)/protocol.mk -include $(TMK_DIR)/protocol/lufa.mk -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/rules.mk diff --git a/converter/serialmouse_usb/README.md b/converter/serialmouse_usb/README.md deleted file mode 100644 index ef8a00671..000000000 --- a/converter/serialmouse_usb/README.md +++ /dev/null @@ -1,11 +0,0 @@ -Serial mouse converter -====================== -See https://github.com/tmk/tmk_keyboard/pull/131 - - -Supported protocols -------------------- -### Microsoft -Not tested. - -### Mousesystems diff --git a/converter/serialmouse_usb/config.h b/converter/serialmouse_usb/config.h deleted file mode 100644 index b257d997c..000000000 --- a/converter/serialmouse_usb/config.h +++ /dev/null @@ -1,119 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include <avr/interrupt.h> - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x2222 -#define DEVICE_VER 0x0001 -#define MANUFACTURER t.m.k. -#define PRODUCT serial mouse converter -#define DESCRIPTION convert serial mouse into USB - - -/* matrix size */ -#define MATRIX_ROWS 0 -#define MATRIX_COLS 0 - - -/* key combination for command */ -#define IS_COMMAND() false - - - -#ifdef SERIAL_MOUSE_MICROSOFT - /* - * Serial(USART) configuration (for Microsoft serial mice) - * asynchronous, positive logic, 1200baud, bit order: LSB first - * 1-start bit, 7-data bit, no parity, 1-stop bit - */ - #define SERIAL_UART_BAUD 1200 - #define SERIAL_UART_DATA UDR1 - #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) - #define SERIAL_UART_RXD_VECT USART1_RX_vect - #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) - #define SERIAL_UART_INIT() do { \ - UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ - UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ - UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ - UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \ - sei(); \ - } while(0) - - // for Microsoft mouse protocol - /* Serial(USART) configuration - * asynchronous, negative logic, 1200baud, no flow control - * 1-start bit, 7-data bit, non parity, 1-stop bit - */ - #define SERIAL_SOFT_BAUD 1200 - #define SERIAL_SOFT_DATA_7BIT - #define SERIAL_SOFT_PARITY_NONE - #define SERIAL_SOFT_BIT_ORDER_LSB - #define SERIAL_SOFT_LOGIC_NEGATIVE - /* RXD Port */ - #define SERIAL_SOFT_RXD_DDR DDRD - #define SERIAL_SOFT_RXD_PORT PORTD - #define SERIAL_SOFT_RXD_PIN PIND - #define SERIAL_SOFT_RXD_BIT 2 - #define SERIAL_SOFT_RXD_VECT INT2_vect - /* RXD Interupt */ - #define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ - SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ - /* enable interrupt: INT2(rising edge) */ \ - EICRA |= ((1<<ISC21)|(1<<ISC20)); \ - EIMSK |= (1<<INT2); \ - sei(); \ - } while (0) - #define SERIAL_SOFT_RXD_INT_ENTER() - #define SERIAL_SOFT_RXD_INT_EXIT() do { \ - /* clear interrupt flag */ \ - EIFR = (1<<INTF2); \ - } while (0) - #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) - /* TXD Port */ - #define SERIAL_SOFT_TXD_HI() - #define SERIAL_SOFT_TXD_LO() - #define SERIAL_SOFT_TXD_INIT() -#elif defined(SERIAL_MOUSE_MOUSESYSTEMS) - /* - * Serial(USART) configuration (for Mousesystems serial mice) - * asynchronous, positive logic, 1200baud, bit order: LSB first - * 1-start bit, 8-data bit, no parity, 1-stop bit - */ - #define SERIAL_UART_BAUD 1200 - #define SERIAL_UART_DATA UDR1 - #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) - #define SERIAL_UART_RXD_VECT USART1_RX_vect - #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) - #define SERIAL_UART_INIT() do { \ - UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ - UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ - UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ - UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \ - sei(); \ - } while(0) -#endif - - - - -#endif diff --git a/converter/serialmouse_usb/keymap.c b/converter/serialmouse_usb/keymap.c deleted file mode 100644 index cb78b4d19..000000000 --- a/converter/serialmouse_usb/keymap.c +++ /dev/null @@ -1,33 +0,0 @@ -/* -Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include <stdint.h> -#include <stdbool.h> -#include "keymap.h" - - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - return KC_NO; -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - return (action_t){}; -} - diff --git a/converter/serialmouse_usb/keymap_common.c b/converter/serialmouse_usb/keymap_common.c deleted file mode 100644 index 55a13793c..000000000 --- a/converter/serialmouse_usb/keymap_common.c +++ /dev/null @@ -1,30 +0,0 @@ -/* -Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include "keymap_common.h" - - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; -} diff --git a/converter/serialmouse_usb/keymap_common.h b/converter/serialmouse_usb/keymap_common.h deleted file mode 100644 index 216a8dc02..000000000 --- a/converter/serialmouse_usb/keymap_common.h +++ /dev/null @@ -1,174 +0,0 @@ -/* -Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H - -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "keycode.h" -#include "action.h" -#include "action_macro.h" -#include "report.h" -#include "print.h" -#include "debug.h" -#include "keymap.h" - - -// 32*8(256) byte array which converts PS/2 code into USB code -extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; -extern const uint16_t fn_actions[]; - - -/* All keys */ -#define KEYMAP_ALL( \ - K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ - K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ - K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ - K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ - K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ - K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ - \ - K61, /* for European ISO */ \ - K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ - K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ - KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ - KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ - KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ - KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ - K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ - KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ -) { \ - { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ - { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \ - { KC_##K18, KC_NO, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \ - { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO }, \ - { KC_##K38, KC_NO, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ - { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_NO, KC_##K54, KC_##K55, KC_NO, KC_##K57 }, \ - { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO, KC_##K5D, KC_NO, KC_##K5F }, \ - { KC_NO, KC_##K61, KC_NO, KC_NO, KC_##K64, KC_NO, KC_##K66, KC_##K67 }, \ - { KC_NO, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ - { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_##K83, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_##K90, KC_##K91, KC_NO, KC_NO, KC_##K94, KC_##K95, KC_NO, KC_NO }, \ - { KC_##K98, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K9F }, \ - { KC_##KA0, KC_##KA1, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_##KA7 }, \ - { KC_##KA8, KC_NO, KC_NO, KC_##KAB, KC_NO, KC_NO, KC_NO, KC_##KAF }, \ - { KC_##KB0, KC_NO, KC_##KB2, KC_NO, KC_##KB4, KC_NO, KC_NO, KC_##KB7 }, \ - { KC_##KB8, KC_NO, KC_##KBA, KC_##KBB, KC_NO, KC_NO, KC_NO, KC_##KBF }, \ - { KC_##KC0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_##KC8, KC_NO, KC_##KCA, KC_NO, KC_NO, KC_##KCD, KC_NO, KC_NO }, \ - { KC_##KD0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_##KDA, KC_NO, KC_NO, KC_NO, KC_##KDE, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_##KE9, KC_NO, KC_##KEB, KC_##KEC, KC_NO, KC_NO, KC_NO }, \ - { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO, KC_##KF4, KC_##KF5, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_##KFA, KC_NO, KC_##KFC, KC_##KFD, KC_##KFE, KC_NO }, \ -} - -/* US layout */ -#define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layout */ -#define KEYMAP_ISO( \ - K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ - K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ - K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \ - K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A, K6B,K73,K74,K79, \ - K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ - K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \ -) \ -KEYMAP_ALL( \ - K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ - K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ - K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ - K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ - K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ - K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ - \ - K61, \ - RO, KANA, JYEN, HENK, MHEN, \ - F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \ - SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \ - AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \ - MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \ - MAIL, CALCULATOR, MY_COMPUTER, \ - WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \ - WWW_STOP, WWW_REFRESH, WWW_FAVORITES \ -) - -/* JIS layout */ -#define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endif diff --git a/converter/serialmouse_usb/led.c b/converter/serialmouse_usb/led.c deleted file mode 100644 index f76545f0b..000000000 --- a/converter/serialmouse_usb/led.c +++ /dev/null @@ -1,24 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "stdint.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ -} diff --git a/converter/serialmouse_usb/matrix.c b/converter/serialmouse_usb/matrix.c deleted file mode 100644 index 0e0d87f80..000000000 --- a/converter/serialmouse_usb/matrix.c +++ /dev/null @@ -1,83 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "action.h" -#include "print.h" -#include "util.h" -#include "debug.h" -#include "matrix.h" - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_mouse=true; - return; -} - -uint8_t matrix_scan(void) -{ - return 0; -} - -bool matrix_is_modified(void) -{ - return false; -} - -inline -bool matrix_has_ghost(void) -{ - return false; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return false; -} - -inline -uint8_t matrix_get_row(uint8_t row) -{ - return 0; -} - -void matrix_print(void) -{ -} - -uint8_t matrix_key_count(void) -{ - return 0; -} |