summaryrefslogtreecommitdiffstats
path: root/converter/terminal_bluefruit
diff options
context:
space:
mode:
Diffstat (limited to 'converter/terminal_bluefruit')
-rw-r--r--converter/terminal_bluefruit/Makefile99
-rw-r--r--converter/terminal_bluefruit/README37
-rw-r--r--converter/terminal_bluefruit/config.h112
-rw-r--r--converter/terminal_bluefruit/keymap.c227
-rw-r--r--converter/terminal_bluefruit/led.c35
-rw-r--r--converter/terminal_bluefruit/matrix.c262
6 files changed, 0 insertions, 772 deletions
diff --git a/converter/terminal_bluefruit/Makefile b/converter/terminal_bluefruit/Makefile
deleted file mode 100644
index dec9233ec..000000000
--- a/converter/terminal_bluefruit/Makefile
+++ /dev/null
@@ -1,99 +0,0 @@
-# Target file name (without extension).
-TARGET = terminal_bluefruit
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c
-
-CONFIG_H = config.h
-
-BLUEFRUIT_TRACE_SERIAL=true
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in bytes
-# Teensy halfKay 512
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-
-
-#
-# PS/2 protocol implementations
-# USART is recommended if it is available, others are for reference purpose.
-# INT implementation will drop simultaneous key strokes.
-#
-#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
-PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
-#PS2_USE_BUSYWAIT = yes # uses primitive reference code
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/protocol/bluefruit.mk
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/terminal_bluefruit/README b/converter/terminal_bluefruit/README
deleted file mode 100644
index 6ff1bc92f..000000000
--- a/converter/terminal_bluefruit/README
+++ /dev/null
@@ -1,37 +0,0 @@
-Keyboard converter for IBM terminal keyboard
-============================================
-It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
-I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
-
-Source code: https://github.com/tmk/tmk_keyboard
-Article: http://geekhack.org/index.php?topic=27272.0
-
-
-CONNECTION
-----------
-Keyboard ATMega32U4
-----------------------
-Data: PD2
-Clock: PD5
-
-And VCC and GND, of course. See RESOURCE for keyboard connector pin assign.
-
-
-BUILD
------
-$ git clone https://github.com/tmk/tmk_keyboard.git
-$ cd converter/terminal_usb
-$ make
-
-
-RESOURCE
---------
-Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
-102keys(1392595): http://geekhack.org/index.php?topic=10737.0
-122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
-KbdBabel: http://www.kbdbabel.org/
-RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
-DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
-WinAVR: http://winavr.sourceforge.net/
-
-EOF
diff --git a/converter/terminal_bluefruit/config.h b/converter/terminal_bluefruit/config.h
deleted file mode 100644
index 8bf139d35..000000000
--- a/converter/terminal_bluefruit/config.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-Converter for 70% IBM Terminal Keyboard
-Author: Benjamin Gould, 2013
-Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6535
-#define DEVICE_VER 0x0100
-#define MANUFACTURER t.m.k.
-#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth
-#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth
-
-
-/* matrix size */
-#define MATRIX_ROWS 17 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-
-
-/* legacy keymap support */
-// #define USE_LEGACY_KEYMAP
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
- (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \
-)
-
-/* USART configuration
- * asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
- */
-#ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 9600
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B = (1<<TXEN1); /* TX: enable */ \
- UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
- (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
- sei(); \
- } while(0)
-#else
-# error "USART configuration is needed."
-#endif
-
-/*
- * PS/2 Interrupt configuration
- */
-#ifdef PS2_USE_INT
-/* uses INT1 for clock line(ATMega32U4) */
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 1
-
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
-
-#define PS2_INT_INIT() do { \
- EICRA |= ((1<<ISC11) | \
- (0<<ISC10)); \
-} while (0)
-#define PS2_INT_ON() do { \
- EIMSK |= (1<<INT1); \
-} while (0)
-#define PS2_INT_OFF() do { \
- EIMSK &= ~(1<<INT1); \
-} while (0)
-#define PS2_INT_VECT INT1_vect
-#endif
-
-
-/*
- * PS/2 Busywait configuration
- */
-#ifdef PS2_USE_BUSYWAIT
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 1
-
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
-#endif
-
-#endif
diff --git a/converter/terminal_bluefruit/keymap.c b/converter/terminal_bluefruit/keymap.c
deleted file mode 100644
index 8acd8cfb3..000000000
--- a/converter/terminal_bluefruit/keymap.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
-Converter for 70% IBM Terminal Keyboard
-Author: Benjamin Gould, 2013
-Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-/*
- * IBM Terminal keyboard 6110345(122keys)/1392595(102keys)
- * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
- * http://www.seasip.info/VintagePC/ibm_1391406.html
- *
- * Keymap array:
- * 8 bytes
- * +---------+
- * 0| |
- * :| | 0x00-0x87
- * ;| |
- * 17| |
- * +---------+
- */
-#define KEYMAP( \
- K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \
- K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \
- \
- K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
- K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
- K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \
- K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \
- K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \
-) { \
- { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
- { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
- { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
- { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
- { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
- { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_##K83, KC_##K84, KC_NO, KC_NO, KC_NO, }, \
-}
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: default
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
- * `---' `---------------' `---------------' `---------------' `-----------'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
- * |-----------------------------------------------------------| `-----------' |-----------| +|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| |
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
- * `----' `---------------------------------------' `----' `-----------' `---------------'
- */
-/*
- KEYMAP(
- F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
- F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
-
- PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
- PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM,
- APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT,
- RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO
- ),
-*/
- /*
- KEYMAP(
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
- ),
- */
- // pseudo ANSI
-
- KEYMAP(
- FN0, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO,
- PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP, RGHT,
-
- NO, NO, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, BSPC, NO, NO, NO, NO, NO, NO, NO,
- NO, NO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, NO, NO, NO, NO, NO, NO, NO,
- NO, NO, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, NO, NO, NO, NO, NO,
- NO, NO, LSFT,FN1 ,Z, X, C, V, B, N, M, COMM,DOT, SLSH, FN1, RSFT, NO, NO, NO, NO, NO, NO, NO,
- NO, NO, LCTL, LALT, SPC, LGUI, APP, NO, NO, NO, NO, NO
- ),
-
- // Momentary Function Layer
- KEYMAP(
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
- TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
- TRNS,TRNS, TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP ,END, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN, RGHT,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS, TRNS,RSFT, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, BTN2, TRNS, BTN1, RALT, RCTL, TRNS, TRNS,TRNS,TRNS,TRNS
- ),
-
- // Mouse Layer
- KEYMAP(
- FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
- TRNS,TRNS, TRNS,NO, NO, MS_U,NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
- TRNS,TRNS, BTN2,BTN1,MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
- TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
- TRNS,TRNS, TRNS, TRNS, BTN1, BTN2, TRNS, NO, NO, NO, NO, NO
- ),
-
- // vi Layer
- KEYMAP(
- FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
- TRNS,TRNS, TRNS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
- TRNS,TRNS, TRNS,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
- TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
- TRNS,TRNS, TRNS, TRNS, SPC, RALT, RCTL, NO, NO, NO, NO, NO
- ),
-
- // num lock layer
- KEYMAP(
- FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
-
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
- TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
- ),
-
-};
-
-
-static const uint16_t fn_actions[] PROGMEM = {
- [0] = ACTION_DEFAULT_LAYER_SET(0),
- [1] = ACTION_LAYER_MOMENTARY(1),
- [2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE),
- [3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE),
- [4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE),
- [5] = KC_NO,
- [6] = KC_NO,
- [7] = KC_NO,
-};
-
-/*
-enum macro_id {
- MS_UL,
- MS_UR,
- MS_DL,
- MS_DR,
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- keyevent_t event = record->event;
-
- switch (id) {
- case MS_UL:
- return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
- case MS_UR:
- return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
- case MS_DL:
- return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
- case MS_DR:
- return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
- }
- return MACRO_NONE;
-}
-*/
-
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
- return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-}
-
-action_t keymap_fn_to_action(uint8_t keycode)
-{
- action_t action;
- action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
- return action;
-}
diff --git a/converter/terminal_bluefruit/led.c b/converter/terminal_bluefruit/led.c
deleted file mode 100644
index e5bf41d4a..000000000
--- a/converter/terminal_bluefruit/led.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Converter for 70% IBM Terminal Keyboard
-Author: Benjamin Gould, 2013
-Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "ps2.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
- uint8_t ps2_led = 0;
- if (usb_led & (1<<USB_LED_SCROLL_LOCK))
- ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
- if (usb_led & (1<<USB_LED_NUM_LOCK))
- ps2_led |= (1<<PS2_LED_NUM_LOCK);
- if (usb_led & (1<<USB_LED_CAPS_LOCK))
- ps2_led |= (1<<PS2_LED_CAPS_LOCK);
- ps2_host_set_led(ps2_led);
-}
diff --git a/converter/terminal_bluefruit/matrix.c b/converter/terminal_bluefruit/matrix.c
deleted file mode 100644
index 36901536f..000000000
--- a/converter/terminal_bluefruit/matrix.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "debug.h"
-#include "ps2.h"
-#include "matrix.h"
-
-
-static void matrix_make(uint8_t code);
-static void matrix_break(uint8_t code);
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-
-
-/*
- * Matrix Array usage:
- * 'Scan Code Set 3' is assigned into 17x8 cell matrix.
- *
- * 8bit wide
- * +---------+
- * 0| |
- * :| | 0x00-0x87
- * ;| |
- * 17| |
- * +---------+
- */
-static uint8_t matrix[MATRIX_ROWS];
-#define ROW(code) (code>>3)
-#define COL(code) (code&0x07)
-
-static bool is_modified = false;
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- debug_enable = true;
- //debug_matrix = true;
- //debug_keyboard = true;
- //debug_mouse = false;
-
- ps2_host_init();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-
- return;
-}
-
-uint8_t matrix_scan(void)
-{
-
- // scan code reading states
- static enum {
- RESET,
- RESET_RESPONSE,
- KBD_ID0,
- KBD_ID1,
- CONFIG,
- READY,
- F0,
- } state = RESET;
-
- is_modified = false;
-
- uint8_t code;
- if ((code = ps2_host_recv())) {
- debug("r"); debug_hex(code); debug(" ");
- }
-
- switch (state) {
- case RESET:
- debug("wFF ");
- if (ps2_host_send(0xFF) == 0xFA) {
- debug("[ack]\nRESET_RESPONSE: ");
- state = RESET_RESPONSE;
- }
- break;
- case RESET_RESPONSE:
- if (code == 0xAA) {
- debug("[ok]\nKBD_ID: ");
- state = KBD_ID0;
- } else if (code) {
- debug("err\nRESET: ");
- state = RESET;
- }
- break;
- // after reset receive keyboad ID(2 bytes)
- case KBD_ID0:
- if (code) {
- state = KBD_ID1;
- }
- break;
- case KBD_ID1:
- if (code) {
- debug("\nCONFIG: ");
- state = CONFIG;
- }
- break;
- case CONFIG:
- debug("wF8 ");
- if (ps2_host_send(0xF8) == 0xFA) {
- debug("[ack]\nREADY\n");
- state = READY;
- }
- break;
- case READY:
- switch (code) {
- case 0x00:
- break;
- case 0xF0:
- state = F0;
- debug(" ");
- break;
- default: // normal key make
- if (code < 0x88) {
- matrix_make(code);
- } else {
- debug("unexpected scan code at READY: "); debug_hex(code); debug("\n");
- }
- state = READY;
- debug("\n");
- }
- break;
- case F0: // Break code
- switch (code) {
- case 0x00:
- break;
- default:
- if (code < 0x88) {
- matrix_break(code);
- } else {
- debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
- }
- state = READY;
- debug("\n");
- }
- break;
- }
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- return is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix_has_ghost_in_row(i))
- return true;
- }
-#endif
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-uint8_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 01234567\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
- pbin_reverse(matrix_get_row(row));
-#ifdef MATRIX_HAS_GHOST
- if (matrix_has_ghost_in_row(row)) {
- print(" <ghost");
- }
-#endif
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop(matrix[i]);
- }
- return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
- // no ghost exists in case less than 2 keys on
- if (((matrix[row] - 1) & matrix[row]) == 0)
- return false;
-
- // ghost exists in case same state as other row
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- if (i != row && (matrix[i] & matrix[row]) == matrix[row])
- return true;
- }
- return false;
-}
-#endif
-
-
-inline
-static void matrix_make(uint8_t code)
-{
- if (!matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] |= 1<<COL(code);
- is_modified = true;
- }
-}
-
-inline
-static void matrix_break(uint8_t code)
-{
- if (matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] &= ~(1<<COL(code));
- is_modified = true;
- }
-}
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-06-21 03:27:51 +0200