summaryrefslogtreecommitdiffstats
path: root/converter/x68k_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/x68k_usb')
-rw-r--r--converter/x68k_usb/Makefile101
-rw-r--r--converter/x68k_usb/README151
-rw-r--r--converter/x68k_usb/config_pjrc.h67
-rw-r--r--converter/x68k_usb/keymap.c150
-rw-r--r--converter/x68k_usb/led.c43
-rw-r--r--converter/x68k_usb/matrix.c142
6 files changed, 0 insertions, 654 deletions
diff --git a/converter/x68k_usb/Makefile b/converter/x68k_usb/Makefile
deleted file mode 100644
index 60e9a5746..000000000
--- a/converter/x68k_usb/Makefile
+++ /dev/null
@@ -1,101 +0,0 @@
-#
-# Makefile for PJRC Teensy
-#
-
-
-# Target file name (without extension).
-TARGET = x68k_usb_pjrc
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c \
- protocol/serial_uart.c
-
-CONFIG_H = config_pjrc.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Boot Section Size in bytes
-# Teensy halfKay 512
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# *Comment out* to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-
-
-
-#---------------- Programming Options --------------------------
-AVRDUDE = avrdude
-# Type: avrdude -c ? to get a full listing.
-AVRDUDE_PROGRAMMER = avr109
-AVRDUDE_PORT = /dev/ttyACM0
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-#AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-#PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol/pjrc.mk
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/x68k_usb/README b/converter/x68k_usb/README
deleted file mode 100644
index 516fcd249..000000000
--- a/converter/x68k_usb/README
+++ /dev/null
@@ -1,151 +0,0 @@
-X68000 to USB keyboard protocol converter
-=========================================
-SHARP X68000 is a hobby computer released in Japan.(1987-93)
-http://en.wikipedia.org/wiki/Sharp_X68000
-
-X68000 keyboard has ALPS linear switches.
-- DSETK0016CE01 green linear
-- DSETK0022CE02 yellow linear
-- DSETK0023CE03 yellow linear
-
-
-Hardware
---------
-Target MCU is ATMega32u4 but other USB capable AVR will also work.
-You can use PJRC Teensy as development board.
- http://www.pjrc.com/teensy/
-
-Wiring:
- Mini-DIN Teensy
- -----------------------------------------------------
- pin1 +5V VCC
- pin2 MOUSE -
- pin3 RXD PD2(RXD)
- pin4 TXD PD3(TXD) NOTE: Not supported yet.
- pin5 READY -
- pin6 REMOTE -
- pin7 GND GND
-
-
-Firmware
---------
-Build:
- $ cd x68k_usb
- $ make
-
-And load the binary to MCU with your favorite programmer.
-If you use Teensy you can load with PJRC Teensy Loader tool.
- http://www.pjrc.com/teensy/loader.html
-
-
-* * * * * * * * * * * * * * * * * *
-
-
-X68000 Keyboard Protocol
-========================
-http://kyoutan.jpn.org/uts/pc/pic/x68key/
-
-
-Connector
----------
-Mini DIN 7pin(female connector on computer side)
- 7 6 5
- o o o
- 4 o = o 3
- o o
- 2 1
-
- Mini-DIN
- -------------
- pin1 +5V
- pin2 MOUSE
- pin3 RXD
- pin4 TXD
- pin5 READY
- pin6 REMOTE
- pin7 GND
-
-
-Signaling
----------
-- TXD,RXD
- Asynchronous, 2400baud, 1-startbit(L), 8-databit, 1-stopbit(H)
-
-- READY
- ready/not ready(1/0)
-
-
-Data from keyboard
-------------------
-bit 7 make/break flag(0/1)
-bit 6-0 following scan code
-
-
-Data from computer
-------------------
-- LED control ON/OFF(0/1)
- bit 7 1(fixed)
- bit 6 全角
- bit 5 ひらがな
- bit 4 INS
- bit 3 CAPS
- bit 2 コード入力
- bit 1 ローマ字
- bit 0 かな
-
-- Repeat delay
- bit 7 0(fixed)
- bit 6 1(fixed)
- bit 5 1(fixed)
- bit 4 0(fixed)
- bit 3-0 delay
- REPEAT_DELAY = 200+delay*100 ms
- default: 500ms
-
-- Repeat time
- bit 7 0(fixed)
- bit 6 1(fixed)
- bit 5 1(fixed)
- bit 4 1(fixed)
- bit 3-0 time
- REPEAT_TIME = 30+time^2*5 ms
- default: 110ms
-
-
-Scan Codes
-----------
-,---. ,---. ,-------------------, ,-------------------. ,-----------. ,---------------.
-| 61| | 62| | 63| 64| 65| 66| 67| | 68| 69| 6A| 6B| 6C| | 5A| 5B| 5C| | 5D| 52| 53| 54|
-`---' `---' `-------------------' `-------------------' `-----------' `---------------'
-,-----------------------------------------------------------. ,-----------. ,---------------.
-| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F| | 36| 5E| 37| | 3F| 40| 41| 42|
-|-----------------------------------------------------------| |------------ |---------------|
-| 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| | | 38| 39| 3A| | 43| 44| 45| 46|
-|------------------------------------------------------. 1D | `---=====---' |---------------|
-| 71 | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29| | ___| 3C|___ | 47| 48| 49| 4A|
-|-----------------------------------------------------------| | 3B|---| 3D| |-----------|---|
-| 70 | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 70 | `---| 3E|---' | 4B| 4C| 4D| |
-`-----------------------------------------------------------| .---=====---. |-----------| 4E|
- | 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
- `---------------------------------------------' `-----------' `---------------'
-
-
-
-LED Special Functions
----------------------
-http://homepage2.nifty.com/m_kamada/docs/unlistedx68k.htm#keyboard
-
-1. Random Illumination
- Plug in with pressing F1, F2 and F3.
-
-2. Sequential Illumination
- Plug in with pressing 記号入力(52), 登録(53) and HELP.
-
-3. Scan code Display
- Plug in with pressing かな(5A), ローマ字(5B) and コード入力(5C).
- You can see its scan code on LEDs by pressing a key.
- +---------------------------------------------------+
- |bit|6 |5 |4 |3 |2 |1 |0 |
- |---+----+--------+---+----+----------+--------+----|
- |LED|全角|ひらがな|INS|CAPS|コード入力|ローマ字|かな|
- +---------------------------------------------------+
diff --git a/converter/x68k_usb/config_pjrc.h b/converter/x68k_usb/config_pjrc.h
deleted file mode 100644
index c49b4a73e..000000000
--- a/converter/x68k_usb/config_pjrc.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6800
-#define MANUFACTURER t.m.k.
-#define PRODUCT SHARP X68000 keyboard converter
-#define DESCRIPTION converts SHARP X68000 keyboard protocol into USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS 8
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
- keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
- keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) \
-)
-
-/* legacy keymap support */
-#define USE_LEGACY_KEYMAP
-
-
-/* USART configuration
- * asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
- */
-#ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 2400
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B = (1<<RXCIE1) | (1<<RXEN1) | /* RX: interrupt, RX: enable */ \
- (1<<TXEN1); /* TX: enable */ \
- UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
- (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
- sei(); \
- } while(0)
-#else
-# error "USART configuration is needed."
-#endif
-
-#endif
diff --git a/converter/x68k_usb/keymap.c b/converter/x68k_usb/keymap.c
deleted file mode 100644
index 5e09f55d2..000000000
--- a/converter/x68k_usb/keymap.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-// Following macros help you to define a keymap with the form of actual keyboard layout.
-
-/* X68000 Keyboard Scan codes
- ,---. ,---. ,-------------------, ,-------------------. ,-----------. ,---------------.
- | 61| | 62| | 63| 64| 65| 66| 67| | 68| 69| 6A| 6B| 6C| | 5A| 5B| 5C| | 5D| 52| 53| 54|
- `---' `---' `-------------------' `-------------------' `-----------' `---------------'
- ,-----------------------------------------------------------. ,-----------. ,---------------.
- | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F| | 36| 5E| 37| | 3F| 40| 41| 42|
- |-----------------------------------------------------------| |------------ |---------------|
- | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| | | 38| 39| 3A| | 43| 44| 45| 46|
- |------------------------------------------------------. 1D | `---=====---' |---------------|
- | 71 | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29| | ___| 3C|___ | 47| 48| 49| 4A|
- |-----------------------------------------------------------| | 3B|---| 3D| |-----------|---|
- | 70 | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 70 | `---| 3E|---' | 4B| 4C| 4D| |
- `-----------------------------------------------------------| .---=====---. |-----------| 4E|
- | 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
- `---------------------------------------------' `-----------' `---------------'
-*/
-#define KEYMAP( \
- K61,K62, K63,K64,K65,K66,K67, K68,K69,K6A,K6B,K6C, K5A,K5B,K5C, K5D,K52,K53,K54, \
- K01,K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D,K0E,K0F, K36,K5E,K37, K3F,K40,K41,K42, \
- K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B,K1C, K1D, K38,K39,K3A, K43,K44,K45,K46, \
- K71,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29, K3C, K47,K48,K49,K4A, \
- K70,K2A,K2B,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34, K3B,K3E,K3D, K4B,K4C,K4D,K4E, \
- K5F,K55,K56, K35, K57,K58,K59,K60, K72, K73, K4F,K50,K51 \
-) { \
- { KC_NO, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
- { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
- { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
- { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
- { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \
-}
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 0, // Fn0
- 0, // Fn1
- 0, // Fn2
- 0, // Fn3
- 0, // Fn4
- 0, // Fn5
- 0, // Fn6
- 0 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KC_NO, // Fn0
- KC_NO, // Fn1
- KC_NO, // Fn2
- KC_NO, // Fn3
- KC_NO, // Fn4
- KC_NO, // Fn5
- KC_NO, // Fn6
- KC_NO // Fn7
-};
-
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* X68000 Keyboard Scan codes
- ,---. ,---. ,-------------------, ,-------------------. ,-----------. ,---------------.
- | 61| | 62| | 63| 64| 65| 66| 67| | 68| 69| 6A| 6B| 6C| | 5A| 5B| 5C| | 5D| 52| 53| 54|
- `---' `---' `-------------------' `-------------------' `-----------' `---------------'
- ,-----------------------------------------------------------. ,-----------. ,---------------.
- | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F| | 36| 5E| 37| | 3F| 40| 41| 42|
- |-----------------------------------------------------------| |------------ |---------------|
- | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| | | 38| 39| 3A| | 43| 44| 45| 46|
- |------------------------------------------------------. 1D | `---=====---' |---------------|
- | 71 | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29| | ___| 3C|___ | 47| 48| 49| 4A|
- |-----------------------------------------------------------| | 3B|---| 3D| |-----------|---|
- | 70 | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 70 | `---| 3E|---' | 4B| 4C| 4D| |
- `-----------------------------------------------------------| .---=====---. |-----------| 4E|
- | 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
- `---------------------------------------------' `-----------' `---------------'
-*/
- /* ANSI */
- KEYMAP(
- F16, F17, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PSCR,SLCK,PAUS, CAPS,F11, F12, F13,
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,BSPC, HOME,INS, DEL, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, PGDN,PGUP,END, P7, P8, P9, PPLS,
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,F18, UP, P4, P5, P6, PEQL,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,GRV, LEFT,DOWN,RGHT, P1, P2, P3, PENT,
- F19, LGUI,LALT, SPC, RALT,RGUI,RCTL,APP, F14, F15, P0, PCMM,PDOT
- ),
- /* JIS */
- KEYMAP(
- F16, F17, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PSCR,SLCK,PAUS, CAPS,F11, F12, F13,
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, HOME,INS, DEL, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, PGDN,PGUP,END, P7, P8, P9, PPLS,
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, UP, P4, P5, P6, PEQL,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, LEFT,DOWN,RGHT, P1, P2, P3, PENT,
- LGUI,LALT,MHEN, SPC, HENK,KANA,APP, ZKHK, F14, F15, P0, PCMM,PDOT
- ),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
- return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
- return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/converter/x68k_usb/led.c b/converter/x68k_usb/led.c
deleted file mode 100644
index ccc38699c..000000000
--- a/converter/x68k_usb/led.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "serial.h"
-#include "led.h"
-#include "debug.h"
-
-
-void led_set(uint8_t usb_led)
-{
- /* X68000 LED bits 0: on, 1: off
- * bit 7 1(fixed)
- * bit 6 全角
- * bit 5 ひらがな
- * bit 4 INS
- * bit 3 CAPS
- * bit 2 コード入力
- * bit 1 ローマ字
- * bit 0 かな
- */
- uint8_t led = 0xFF;
- if (usb_led&(1<<USB_LED_NUM_LOCK)) led &= ~(1<<2);
- if (usb_led&(1<<USB_LED_CAPS_LOCK)) led &= ~(1<<3);
- if (usb_led&(1<<USB_LED_SCROLL_LOCK)) led &= ~(1<<1);
- if (usb_led&(1<<USB_LED_COMPOSE)) led &= ~(1<<4);
- if (usb_led&(1<<USB_LED_KANA)) led &= ~(1<<0);
- serial_send(led);
-}
diff --git a/converter/x68k_usb/matrix.c b/converter/x68k_usb/matrix.c
deleted file mode 100644
index 2d5a1e116..000000000
--- a/converter/x68k_usb/matrix.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "serial.h"
-#include "matrix.h"
-#include "debug.h"
-
-
-/*
- * Matrix Array usage:
- *
- * ROW: 16(4bits)
- * COL: 8(3bits)
- *
- * 8bit wide
- * +---------+
- * 0|00 ... 07|
- * 1|08 ... 0F|
- * :| ... |
- * :| ... |
- * E|70 ... 77|
- * F|78 ... 7F|
- * +---------+
- *
- */
-static uint8_t matrix[MATRIX_ROWS];
-#define ROW(code) ((code>>3)&0xF)
-#define COL(code) (code&0x07)
-
-static bool is_modified = false;
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- serial_init();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-
- return;
-}
-
-uint8_t matrix_scan(void)
-{
- is_modified = false;
-
- uint16_t code;
- code = serial_recv2();
- if (code == -1) {
- return 0;
- }
-
- dprintf("%02X\n", code);
- if (code&0x80) {
- // break code
- if (matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] &= ~(1<<COL(code));
- is_modified = true;
- }
- } else {
- // make code
- if (!matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] |= (1<<COL(code));
- is_modified = true;
- }
- }
- return code;
-}
-
-bool matrix_is_modified(void)
-{
- return is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-uint8_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 01234567\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
- pbin_reverse(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop(matrix[i]);
- }
- return count;
-}
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-06-16 15:48:14 +0200