summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/BUILD_GUIDE.md7
-rw-r--r--doc/HAND_WIRE.md2
-rw-r--r--doc/TMK_README.md2
-rw-r--r--doc/VAGRANT_GUIDE.md2
4 files changed, 6 insertions, 7 deletions
diff --git a/doc/BUILD_GUIDE.md b/doc/BUILD_GUIDE.md
index c9a760107..70a4e10fa 100644
--- a/doc/BUILD_GUIDE.md
+++ b/doc/BUILD_GUIDE.md
@@ -1,4 +1,4 @@
-# Build Guide
+# This guide has now been included in the main readme - please reference that one instead.
## Build Environment Setup
@@ -40,7 +40,7 @@ If you have any problems building the firmware, you can try using a tool called
## Verify Your Installation
1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application.
2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead.
-3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `README.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`.
+3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `readme.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`.
4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below.
## Customizing, Building, and Deploying Your Firmware
@@ -49,7 +49,7 @@ If you have any problems building the firmware, you can try using a tool called
The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboards/<keyboard>/`), or your keymap folder (`/keyboards/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)).
-By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. Your .hex file will also be copied into your keymap folder as `compiled.hex`, which isn't ignored by git - this is included in case first-time users are having trouble compiling, and just want to flash a layout via `make dfu-no-build` or using the Teensy loader.
+By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests.
* The "root" (`/`) folder is the qmk_firmware folder, in which are `doc`, `keyboard`, `quantum`, etc.
* The "keyboard" folder is any keyboard project's folder, like `/keyboards/planck`.
@@ -63,7 +63,6 @@ Below is a list of the useful `make` commands in QMK:
* `make quick` - skips the clean step (cannot be used immediately after modifying config.h or Makefiles)
* `make dfu` - (requires dfu-programmer) builds and flashes the keymap to your keyboard once placed in reset/dfu mode (button or press `KC_RESET`). This does not work for Teensy-based keyboards like the ErgoDox EZ.
* `keyboard=` and `keymap=` are compatible with this
-* `make dfu-no-build` - (requires dfu-programmer) same as `make dfu`, but doesn't build and uses the included `compiled.hex` to flash the keyboard
* `make all-keyboards` - builds all keymaps for all keyboards and outputs status of each (use in root)
* `make all-keyboards-default` - builds all default keymaps for all keyboards and outputs status of each (use in root)
* `make all-keymaps [keyboard=<keyboard>]` - builds all of the keymaps for whatever keyboard folder you're in, or specified by `<keyboard>`
diff --git a/doc/HAND_WIRE.md b/doc/HAND_WIRE.md
index bb3683cb9..18cb7011f 100644
--- a/doc/HAND_WIRE.md
+++ b/doc/HAND_WIRE.md
@@ -306,7 +306,7 @@ If you've done all of these things, keep in mind that sometimes you might have h
Now that you have a working board, it's time to get things in their permanent positions. I've often used liberal amounts of hot glue to secure and insulate things, so if that's your style, start spreading that stuff like butter. Otherwise, double-sided tape is always an elegant solution, and electrical tape is a distant second. Due to the nature of these builds, a lot of this part is up to you and how you planned (or didn't plan) things out.
-There are a lot of possibilities inside the firmware - check out the [README](https://github.com/jackhumbert/qmk_firmware/blob/master/README.md) for a full feature list, and dive into the different project (Planck, Ergodox EZ, etc) to see how people use all of them. You can always stop by [the OLKB subreddit for help!](http://reddit.com/r/olkb)
+There are a lot of possibilities inside the firmware - check out the [readme](https://github.com/jackhumbert/qmk_firmware/blob/master/readme.md) for a full feature list, and dive into the different project (Planck, Ergodox EZ, etc) to see how people use all of them. You can always stop by [the OLKB subreddit for help!](http://reddit.com/r/olkb)
## Trouble-shooting compiling
diff --git a/doc/TMK_README.md b/doc/TMK_README.md
index 150b4f93b..6164dacd3 100644
--- a/doc/TMK_README.md
+++ b/doc/TMK_README.md
@@ -113,7 +113,7 @@ Third party libraries like LUFA, PJRC and V-USB have their own license respectiv
Build Firmware and Program Controller
-------------------------------------
-See [doc/build.md](tmk_core/doc/build.md), or the README in the particular keyboards/* folder.
+See [doc/build.md](tmk_core/doc/build.md), or the readme in the particular keyboards/* folder.
diff --git a/doc/VAGRANT_GUIDE.md b/doc/VAGRANT_GUIDE.md
index 72223e804..62044b7f7 100644
--- a/doc/VAGRANT_GUIDE.md
+++ b/doc/VAGRANT_GUIDE.md
@@ -12,7 +12,7 @@ Other than having Vagrant and Virtualbox installed and possibly a restart of you
Build Firmware and Program Controller
-------------------------------------
-See [/doc/BUIDE_GUIDE.md](/doc/BUILD_GUIDE.md), or the README in the particular keyboards/* folder.
+See [/doc/BUIDE_GUIDE.md](/doc/BUILD_GUIDE.md), or the readme in the particular keyboards/* folder.
Change your keymap
------------------