diff options
Diffstat (limited to 'docs/faq_build.md')
| -rw-r--r-- | docs/faq_build.md | 9 |
1 files changed, 7 insertions, 2 deletions
diff --git a/docs/faq_build.md b/docs/faq_build.md index be26a7c58..45d9439b4 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -15,7 +15,7 @@ or just: $ sudo make <keyboard>:<keymap>:dfu -Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible. +Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible. ### Linux `udev` Rules On Linux, you'll need proper privileges to access the MCU. You can either use @@ -47,7 +47,12 @@ If you're using Windows to flash your keyboard, and you are running into issues, Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. -If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again. +If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUSB` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again. If that doesn't work, try all of the options, until one works. + +?> There isn't a best option for which driver should be used here. Some options work better on some systems than others. libUSB and WinUSB seem to be the best options here. + +If the bootloader doesn't show up in the list for devices, you may need to enable the "List all devices" option in the `Options` menu, and then find the bootloader in question. + ## WINAVR is Obsolete It is no longer recommended and may cause some problem. |