diff options
Diffstat (limited to 'drivers/avr/hd44780.h')
| -rw-r--r-- | drivers/avr/hd44780.h | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/drivers/avr/hd44780.h b/drivers/avr/hd44780.h new file mode 100644 index 000000000..7421c8131 --- /dev/null +++ b/drivers/avr/hd44780.h @@ -0,0 +1,371 @@ +#ifndef LCD_H +#define LCD_H +/************************************************************************* + Title : C include file for the HD44780U LCD library (lcd.c) + Author: Peter Fleury <pfleury@gmx.ch> http://tinyurl.com/peterfleury + License: GNU General Public License Version 3 + File: $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $ + Software: AVR-GCC 4.x + Hardware: any AVR device, memory mapped mode only for AVR with + memory mapped interface (AT90S8515/ATmega8515/ATmega128) +***************************************************************************/ + +/** + @mainpage + Collection of libraries for AVR-GCC + @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury + @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 + + @file + @defgroup pfleury_lcd LCD library <lcd.h> + @code #include <lcd.h> @endcode + + @brief Basic routines for interfacing a HD44780U-based character LCD display + + LCD character displays can be found in many devices, like espresso machines, laser printers. + The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. + + This library allows easy interfacing with a HD44780 compatible display and can be + operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in + 4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported. + + Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports + generation of R/W signal through A8 address line. + + @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a> + on my home page, which shows example circuits how to connect an LCD to an AVR controller. + + @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury + + @version 2.0 + + @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3 + +*/ + +#include <inttypes.h> +#include <avr/pgmspace.h> + +#if (__GNUC__ * 100 + __GNUC_MINOR__) < 405 +#error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !" +#endif + + +/**@{*/ + +/* + * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file + * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + */ +#ifdef _LCD_DEFINITIONS_FILE +#include "lcd_definitions.h" +#endif + + +/** + * @name Definition for LCD controller type + * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller. + */ +#ifndef LCD_CONTROLLER_KS0073 +#define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */ +#endif + +/** + * @name Definitions for Display Size + * Change these definitions to adapt setting to your display + * + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + * + */ +#ifndef LCD_LINES +#define LCD_LINES 2 /**< number of visible lines of the display */ +#endif +#ifndef LCD_DISP_LENGTH +#define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */ +#endif +#ifndef LCD_LINE_LENGTH +#define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */ +#endif +#ifndef LCD_START_LINE1 +#define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */ +#endif +#ifndef LCD_START_LINE2 +#define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */ +#endif +#ifndef LCD_START_LINE3 +#define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */ +#endif +#ifndef LCD_START_LINE4 +#define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */ +#endif +#ifndef LCD_WRAP_LINES +#define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */ +#endif + + +/** + * @name Definitions for 4-bit IO mode + * + * The four LCD data lines and the three control lines RS, RW, E can be on the + * same port or on different ports. + * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on + * different ports. + * + * Normally the four data lines should be mapped to bit 0..3 on one port, but it + * is possible to connect these data lines in different order or even on different + * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions. + * + * Adjust these definitions to your target.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + * + */ +#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */ + +#if LCD_IO_MODE + +#ifndef LCD_PORT +#define LCD_PORT PORTA /**< port for the LCD lines */ +#endif +#ifndef LCD_DATA0_PORT +#define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */ +#endif +#ifndef LCD_DATA1_PORT +#define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */ +#endif +#ifndef LCD_DATA2_PORT +#define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */ +#endif +#ifndef LCD_DATA3_PORT +#define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */ +#endif +#ifndef LCD_DATA0_PIN +#define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0 */ +#endif +#ifndef LCD_DATA1_PIN +#define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1 */ +#endif +#ifndef LCD_DATA2_PIN +#define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2 */ +#endif +#ifndef LCD_DATA3_PIN +#define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3 */ +#endif +#ifndef LCD_RS_PORT +#define LCD_RS_PORT LCD_PORT /**< port for RS line */ +#endif +#ifndef LCD_RS_PIN +#define LCD_RS_PIN 3 /**< pin for RS line */ +#endif +#ifndef LCD_RW_PORT +#define LCD_RW_PORT LCD_PORT /**< port for RW line */ +#endif +#ifndef LCD_RW_PIN +#define LCD_RW_PIN 2 /**< pin for RW line */ +#endif +#ifndef LCD_E_PORT +#define LCD_E_PORT LCD_PORT /**< port for Enable line */ +#endif +#ifndef LCD_E_PIN +#define LCD_E_PIN 1 /**< pin for Enable line */ +#endif + +#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \ + defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \ + defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__) +/* + * memory mapped mode is only supported when the device has an external data memory interface + */ +#define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */ +#define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */ +#define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */ + +#else +#error "external data memory interface not available for this device, use 4-bit IO port mode" + +#endif + + +/** + * @name Definitions of delays + * Used to calculate delay timers. + * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target + * + * These delay times can be adjusted, if some displays require different delays.\n + * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by + * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile. + * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h + */ +#ifndef LCD_DELAY_BOOTUP +#define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on */ +#endif +#ifndef LCD_DELAY_INIT +#define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent */ +#endif +#ifndef LCD_DELAY_INIT_REP +#define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */ +#endif +#ifndef LCD_DELAY_INIT_4BIT +#define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */ +#endif +#ifndef LCD_DELAY_BUSY_FLAG +#define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */ +#endif +#ifndef LCD_DELAY_ENABLE_PULSE +#define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */ +#endif + + +/** + * @name Definitions for LCD command instructions + * The constants define the various LCD controller instructions which can be passed to the + * function lcd_command(), see HD44780 data sheet for a complete description. + */ + +/* instruction register bit positions, see HD44780U data sheet */ +#define LCD_CLR 0 /* DB0: clear display */ +#define LCD_HOME 1 /* DB1: return to home position */ +#define LCD_ENTRY_MODE 2 /* DB2: set entry mode */ +#define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */ +#define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */ +#define LCD_ON 3 /* DB3: turn lcd/cursor on */ +#define LCD_ON_DISPLAY 2 /* DB2: turn display on */ +#define LCD_ON_CURSOR 1 /* DB1: turn cursor on */ +#define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */ +#define LCD_MOVE 4 /* DB4: move cursor/display */ +#define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */ +#define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */ +#define LCD_FUNCTION 5 /* DB5: function set */ +#define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */ +#define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */ +#define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */ +#define LCD_CGRAM 6 /* DB6: set CG RAM address */ +#define LCD_DDRAM 7 /* DB7: set DD RAM address */ +#define LCD_BUSY 7 /* DB7: LCD is busy */ + +/* set entry mode: display shift on/off, dec/inc cursor move direction */ +#define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */ +#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */ +#define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */ +#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */ + +/* display on/off, cursor on/off, blinking char at cursor position */ +#define LCD_DISP_OFF 0x08 /* display off */ +#define LCD_DISP_ON 0x0C /* display on, cursor off */ +#define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */ +#define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */ +#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */ + +/* move cursor/shift display */ +#define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */ +#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */ +#define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */ +#define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */ + +/* function set: set interface data length and number of display lines */ +#define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */ +#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */ + + +#define LCD_MODE_DEFAULT ((1<<LCD_ENTRY_MODE) | (1<<LCD_ENTRY_INC) ) + + + +/** + * @name Functions + */ + + +/** + @brief Initialize display and select type of cursor + @param dispAttr \b LCD_DISP_OFF display off\n + \b LCD_DISP_ON display on, cursor off\n + \b LCD_DISP_ON_CURSOR display on, cursor on\n + \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing + @return none +*/ +extern void lcd_init(uint8_t dispAttr); + + +/** + @brief Clear display and set cursor to home position + @return none +*/ +extern void lcd_clrscr(void); + + +/** + @brief Set cursor to home position + @return none +*/ +extern void lcd_home(void); + + +/** + @brief Set cursor to specified position + + @param x horizontal position\n (0: left most position) + @param y vertical position\n (0: first line) + @return none +*/ +extern void lcd_gotoxy(uint8_t x, uint8_t y); + + +/** + @brief Display character at current cursor position + @param c character to be displayed + @return none +*/ +extern void lcd_putc(char c); + + +/** + @brief Display string without auto linefeed + @param s string to be displayed + @return none +*/ +extern void lcd_puts(const char *s); + + +/** + @brief Display string from program memory without auto linefeed + @param progmem_s string from program memory be be displayed + @return none + @see lcd_puts_P +*/ +extern void lcd_puts_p(const char *progmem_s); + + +/** + @brief Send LCD controller instruction command + @param cmd instruction to send to LCD controller, see HD44780 data sheet + @return none +*/ +extern void lcd_command(uint8_t cmd); + + +/** + @brief Send data byte to LCD controller + + Similar to lcd_putc(), but without interpreting LF + @param data byte to send to LCD controller, see HD44780 data sheet + @return none +*/ +extern void lcd_data(uint8_t data); + + +/** + @brief macros for automatically storing string constant in program memory +*/ +#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s)) + +/**@}*/ + +#endif //LCD_H + |