diff options
Diffstat (limited to 'keyboard/lufa/lufa.c')
| -rw-r--r-- | keyboard/lufa/lufa.c | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/keyboard/lufa/lufa.c b/keyboard/lufa/lufa.c new file mode 100644 index 000000000..d7e7c1654 --- /dev/null +++ b/keyboard/lufa/lufa.c @@ -0,0 +1,243 @@ +/* + * Copyright 2012 Jun Wako <wakojun@gmail.com> + * This file is based on LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse. + */ + +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "report.h" +#include "host.h" +#include "host_driver.h" +#include "keyboard.h" +#include "lufa.h" + +static uint8_t keyboard_led_stats = 0; +report_keyboard_t keyboard_report_sent; +report_mouse_t mouse_report_sent; + +/* Host driver */ +static uint8_t keyboard_leds(void); +static void send_keyboard(report_keyboard_t *report); +static void send_mouse(report_mouse_t *report); +static void send_system(uint16_t data); +static void send_consumer(uint16_t data); +static host_driver_t lufa_driver = { + keyboard_leds, + send_keyboard, + send_mouse, + send_system, + send_consumer +}; + + +int main(void) +{ + SetupHardware(); + sei(); + + keyboard_init(); + host_set_driver(&lufa_driver); + while (1) { + keyboard_proc(); + Keyboard_HID_Task(); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + USB_Init(); +} + +/** Event handler for the USB_Connect event. */ +void EVENT_USB_Device_Connect(void) +{ +} + +/** Event handler for the USB_Disconnect event. */ +void EVENT_USB_Device_Disconnect(void) +{ +} + +/** Event handler for the USB_ConfigurationChanged event. + * This is fired when the host sets the current configuration of the USB device after enumeration. + */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + /* Setup Keyboard HID Report Endpoints */ + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + HID_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, + HID_EPSIZE, ENDPOINT_BANK_SINGLE); + + /* Setup Mouse HID Report Endpoint */ + ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + HID_EPSIZE, ENDPOINT_BANK_SINGLE); +} + +/** Event handler for the USB_ControlRequest event. + * This is fired before passing along unhandled control requests to the library for processing internally. + */ +void EVENT_USB_Device_ControlRequest(void) +{ + uint8_t* ReportData; + uint8_t ReportSize; + + /* Handle HID Class specific requests */ + switch (USB_ControlRequest.bRequest) + { + case HID_REQ_GetReport: + if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + + /* Determine if it is the mouse or the keyboard data that is being requested */ + if (!(USB_ControlRequest.wIndex)) + { + ReportData = (uint8_t*)&keyboard_report_sent; + ReportSize = sizeof(keyboard_report_sent); + } + else + { + ReportData = (uint8_t*)&mouse_report_sent; + ReportSize = sizeof(mouse_report_sent); + } + + /* Write the report data to the control endpoint */ + Endpoint_Write_Control_Stream_LE(ReportData, ReportSize); + Endpoint_ClearOUT(); + } + + break; + case HID_REQ_SetReport: + if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + { + Endpoint_ClearSETUP(); + + /* Wait until the LED report has been sent by the host */ + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + /* Read in the LED report from the host */ + keyboard_led_stats = Endpoint_Read_8(); + + Endpoint_ClearOUT(); + Endpoint_ClearStatusStage(); + } + + break; + } +} + +/** Keyboard task. + * This processes host LED status reports sent to the device via the keyboard OUT reporting endpoint. + */ +void Keyboard_HID_Task(void) +{ + /* Select the Keyboard LED Report Endpoint */ + Endpoint_SelectEndpoint(KEYBOARD_OUT_EPNUM); + + /* Check if Keyboard LED Endpoint Ready for Read/Write */ + if (Endpoint_IsReadWriteAllowed()) + { + /* Read in the LED report from the host */ + keyboard_led_stats = Endpoint_Read_8(); + + /* Handshake the OUT Endpoint - clear endpoint and ready for next report */ + Endpoint_ClearOUT(); + } +} + + +/******************************************************************************* + * Host driver + ******************************************************************************/ +static uint8_t keyboard_leds(void) +{ + return keyboard_led_stats; +} + +static void send_keyboard(report_keyboard_t *report) +{ + // TODO: handle NKRO report + /* Select the Keyboard Report Endpoint */ + Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); + + /* Check if Keyboard Endpoint Ready for Read/Write */ + if (Endpoint_IsReadWriteAllowed()) + { + /* Write Keyboard Report Data */ + Endpoint_Write_Stream_LE(report, sizeof(report_keyboard_t), NULL); + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); + } + keyboard_report_sent = *report; +} + +static void send_mouse(report_mouse_t *report) +{ + /* Select the Mouse Report Endpoint */ + Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); + + /* Check if Mouse Endpoint Ready for Read/Write */ + if (Endpoint_IsReadWriteAllowed()) + { + /* Write Mouse Report Data */ + Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL); + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); + } + mouse_report_sent = *report; +} + +static void send_system(uint16_t data) +{ +} + +static void send_consumer(uint16_t data) +{ +} |