diff options
Diffstat (limited to 'keyboard/quark')
26 files changed, 0 insertions, 2051 deletions
diff --git a/keyboard/quark/Makefile b/keyboard/quark/Makefile deleted file mode 100644 index f79445e23..000000000 --- a/keyboard/quark/Makefile +++ /dev/null @@ -1,155 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = quark_lufa - -# Directory common source filess exist -TOP_DIR = ../.. - -# Directory keyboard dependent files exist -TARGET_DIR = . - - - -# # project specific files -ifdef COMMON - - SRC = keymap_common.c \ - matrix.c \ - led.c \ - backlight.c - -ifdef KEYMAP - SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC) -else - SRC := common_keymaps/keymap_jack.c $(SRC) -endif - -else - -SRC = extended_keymap_common.c \ - matrix.c \ - led.c \ - backlight.c - -ifdef KEYMAP - SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC) -else - SRC := extended_keymaps/extended_keymap_default.c $(SRC) -endif - -endif - -CONFIG_H = config.h - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality - -# Optimize size but this may cause error "relocation truncated to fit" -#EXTRALDFLAGS = -Wl,--relax - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TOP_DIR) - -include $(TOP_DIR)/protocol/lufa.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk diff --git a/keyboard/quark/Makefile.pjrc b/keyboard/quark/Makefile.pjrc deleted file mode 100644 index be83ba18b..000000000 --- a/keyboard/quark/Makefile.pjrc +++ /dev/null @@ -1,116 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = gh60_pjrc - -# Directory common source filess exist -TOP_DIR = ../.. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# project specific files -SRC = keymap_common.c \ - matrix.c \ - led.c - -ifdef KEYMAP - SRC := keymap_$(KEYMAP).c $(SRC) -else - SRC := keymap_jack.c $(SRC) -endif - -CONFIG_H = config.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -MCU = atmega32u4 -#MCU = at90usb1286 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+5000) -EXTRAKEY_ENABLE = yes # Audio control and System control(+600) -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover(+500) -#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TOP_DIR) - -include $(TOP_DIR)/protocol/pjrc.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk - -plain: OPT_DEFS += -DKEYMAP_PLAIN -plain: all - -poker: OPT_DEFS += -DKEYMAP_POKER -poker: all - -poker_set: OPT_DEFS += -DKEYMAP_POKER_SET -poker_set: all - -poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT -poker_bit: all diff --git a/keyboard/quark/README.md b/keyboard/quark/README.md deleted file mode 100644 index 59afbab1a..000000000 --- a/keyboard/quark/README.md +++ /dev/null @@ -1,53 +0,0 @@ -Quark keyboard firmware -====================== -DIY/Assembled compact 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). - -## Extended Keymap -If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies: - -- Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able) -- Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit -- Use `CM_F` instead of `KC_F` to get the ColeMak equivilent for shortcuts (maps backwards) -- Use `MACRODOWN()` instead of `MACRO()` to easily make a keydown macro (`CM_*` works here too) - -### Some notes on usage: - -- The `KEYMAP()` macro is unable to be used due to the bitwise modifications that take place - refer to extended_keymap_jack.c to see how to set things up with the `KC_` prefix -- Keep an eye on the Makefile - this needs to include the correct files to work -- Don't forget to use `const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {` instead of the 8bit equivilent - -## Build - -Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else. Abbreviated instructions are provide at the [bottom of this document](https://github.com/rswiernik/tmk_keyboard/tree/rswiernik_dev/keyboard/quark#environment-setup) - -Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/quark folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST). - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -####Default -To build with the default keymap, simply move to the tmk\_keyboard/keyboard/quark/ and run `make` as follows: -``` -$ make -``` - -## Keymap -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files. - -####**Extended Keymaps** - -To build the firmware binary hex file with an extended keymap just do `make` with `KEYMAP` option like: -``` -$ make KEYMAP=[common|jack|<name>] -``` -_The only applicable keymaps will work with this option._ Extended keymaps follow the format **__extended\_keymap\_\<name\>.c__** - -####**Common Keymaps** - -Building with a common keymap is as simple as adding the COMMON option. Note that only -``` -$ make KEYMAP=[common|jack|<name>] COMMON=true -``` -_The only applicable keymaps will work with this option._ Common keymaps follow the format **__keymap\_\<name\>.c__** - -## Notable TMK forks (which some of the keymap files are from) -- (add yours) diff --git a/keyboard/quark/backlight.c b/keyboard/quark/backlight.c deleted file mode 100644 index ee7e31ee9..000000000 --- a/keyboard/quark/backlight.c +++ /dev/null @@ -1,46 +0,0 @@ - -#include <avr/io.h> -#include "backlight.h" - - -void backlight_init_ports() -{ - // Setup PB7 as output and output low. - DDRB |= (1<<7); - PORTB &= ~(1<<7); - - // Use full 16-bit resolution. - ICR1 = 0xFFFF; - - // I could write a wall of text here to explain... but TL;DW - // Go read the ATmega32u4 datasheet. - // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on - - // Pin PB7 = OCR1C (Timer 1, Channel C) - // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 - // (i.e. start high, go low when counter matches.) - // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 - // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 - - TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; - TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; - - // Default to zero duty cycle. - OCR1C = 0x0000; -} - -void backlight_set(uint8_t level) -{ - if ( level == 0 ) - { - // Turn off PWM control on PB7, revert to output low. - TCCR1A &= ~(_BV(COM1C1)); - } - else - { - // Turn on PWM control of PB7 - TCCR1A |= _BV(COM1C1); - OCR1C = level << 12 | 0x0FFF; - } -} - diff --git a/keyboard/quark/backlight.h b/keyboard/quark/backlight.h deleted file mode 100644 index 0fe1f4a72..000000000 --- a/keyboard/quark/backlight.h +++ /dev/null @@ -1,2 +0,0 @@ - -void backlight_init_ports(void); diff --git a/keyboard/quark/common_keymaps/keymap_brett.c b/keyboard/quark/common_keymaps/keymap_brett.c deleted file mode 100644 index 97d832b47..000000000 --- a/keyboard/quark/common_keymaps/keymap_brett.c +++ /dev/null @@ -1,42 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, - TAB, LGUI, RSFT, LALT, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), -[1] = KEYMAP( /* RAISE */ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, - TRNS, F1, F2, F3, F4, F5, F6, 4, 5, 6, QUOT, TRNS, - TRNS, F7, F8, F9, F10, F11, F12, 1, 2, 3, TRNS, PGUP, - MPRV, MNXT, TRNS, MUTE, TRNS, TRNS, FN1, 0, 0, TRNS, PGDN), -[2] = KEYMAP( /* LOWER */ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, - TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, BSLS, EQL, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - MPLY, MSTP, VOLU, VOLD, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), - - [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), -}; diff --git a/keyboard/quark/common_keymaps/keymap_dotcom.c b/keyboard/quark/common_keymaps/keymap_dotcom.c deleted file mode 100644 index 347f6dea9..000000000 --- a/keyboard/quark/common_keymaps/keymap_dotcom.c +++ /dev/null @@ -1,34 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - FN1, A, S, D, F, G, H, J, K, L, SCLN, ENT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, LBRC, - LCTL, BSLS, QUOT, LALT, FN22, SPC, LEFT, UP, DOWN, RGHT, RBRC), -[1] = KEYMAP( - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, - TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, TRNS, TRNS, TRNS, - TRNS, FN18, FN19, FN22, EQL, MINS, FN20, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, VOLD, VOLU, TRNS), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), -}; diff --git a/keyboard/quark/common_keymaps/keymap_jack.c b/keyboard/quark/common_keymaps/keymap_jack.c deleted file mode 100644 index c74812121..000000000 --- a/keyboard/quark/common_keymaps/keymap_jack.c +++ /dev/null @@ -1,50 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( /* Jack */ - TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, - ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - RSFT, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), -[1] = KEYMAP( /* Jack colemak */ - TAB, Q, W, F, P, G, J, L, U, Y, SCLN, BSPC, - ESC, A, R, S, T, D, H, N, E, I, O, QUOT, - LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, ENT, - FN3, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), -[2] = KEYMAP( /* Jack RAISE */ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, - TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, - TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY), -[3] = KEYMAP( /* Jack LOWER */ - FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, - TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, - TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - - [3] = ACTION_DEFAULT_LAYER_SET(0), - [4] = ACTION_DEFAULT_LAYER_SET(1), - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), - - [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), -}; diff --git a/keyboard/quark/common_keymaps/keymap_joe.c b/keyboard/quark/common_keymaps/keymap_joe.c deleted file mode 100644 index 07122b702..000000000 --- a/keyboard/quark/common_keymaps/keymap_joe.c +++ /dev/null @@ -1,107 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( /* Joe colemak */ - ESC, Q, W, F, P, G, J, L, U, Y, SCLN, MINS, - BSPC, A, R, S, T, D, H, N, E, I, O, ENT, - TAB, Z, X, C, V, B, K, M, COMM, DOT, SLSH, QUOT, - LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, DOWN, UP, RGHT), -[1] = KEYMAP( /* Joe qwerty */ - ESC, Q, W, E, R, T, Y, U, I, O, P, MINS, - BSPC, A, S, D, F, G, H, J, K, L, SCLN, ENT, - TAB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, QUOT, - LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, DOWN, UP, RGHT), -[2] = KEYMAP( /* Joe RAISE */ - F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, - DEL, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS, - BSLS, FN5, FN6, TRNS, TRNS, MENU, CAPS, INS, PSCR, LBRC, RBRC, FN21, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, FN0, FN26, FN27, FN28, FN29), -[3] = KEYMAP( /* Joe LOWER */ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN7, FN8, FN9, FN30, FN31, - DEL, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, - FN25, FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN23, FN24, EQL, - TRNS, TRNS, TRNS, TRNS, FN1, TRNS, FN2, HOME, PGDN, PGUP, END), -[4] = KEYMAP( /* Joe LOWER + RAISE */ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), -}; - -enum macro_id { - M_Q0, - M_Q1, - M_Q2, - M_Q3, - M_Q4 -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [1] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(4), // to Fn overlay - - [3] = ACTION_DEFAULT_LAYER_SET(0), - [4] = ACTION_DEFAULT_LAYER_SET(1), - - [5] = ACTION_MODS_KEY(MOD_LCTL, KC_PGDN), - [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PGUP), - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), - - [7] = ACTION_MACRO(M_Q0), - [8] = ACTION_MACRO(M_Q1), - [9] = ACTION_MACRO(M_Q2), - [30] = ACTION_MACRO(M_Q3), - [31] = ACTION_MACRO(M_Q4), - - [26] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_LEFT), - [27] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_DOWN), - [28] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_UP), - [29] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_RGHT), - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - keyevent_t event = record->event; - switch (id) { - case M_Q0: - return event.pressed ? - MACRO( D(LSFT), T(SCLN), U(LSFT), T(SLSH), END ) : - MACRO_NONE; - case M_Q1: - return event.pressed ? - MACRO( D(LSFT), T(SCLN), T(9), U(LSFT), END ) : - MACRO_NONE; - case M_Q2: - return event.pressed ? - MACRO( D(LSFT), T(0), T(SCLN), U(LSFT), END ) : - MACRO_NONE; - case M_Q3: - return event.pressed ? - MACRO( D(LSFT), T(9), T(SCLN), U(LSFT), END ) : - MACRO_NONE; - case M_Q4: - return event.pressed ? - MACRO( D(LSFT), T(SCLN), T(0), U(LSFT), END ) : - MACRO_NONE; - - } - return MACRO_NONE; -}
\ No newline at end of file diff --git a/keyboard/quark/common_keymaps/keymap_matthew.c b/keyboard/quark/common_keymaps/keymap_matthew.c deleted file mode 100644 index 56e7003a9..000000000 --- a/keyboard/quark/common_keymaps/keymap_matthew.c +++ /dev/null @@ -1,70 +0,0 @@ -// by Matthew Pepers - https://github.com/pepers - -/* grid planck layout - modified programmer dvorak -,-----------------------------------------------------------------------------------------------. -| pause | @ | | | ^ | | | | | * | # | $ | del | -| esc | ; : | , < | . > | P | Y | F | G | G | C | R | bkspc | -| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | -|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| -| & | / | { | ( | [ | = | ! | ] | ) | } | \ | + | -| ` ~ | A | O | E | U | I | D | H | T | N | S | - _ | -| % | 7 | 5 | 3 | 1 | 9 | 0 | 2 | 4 | 6 | 8 | ? | -|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| -| | | | | | | | | | | | prtsc | -| tab | ' " | Q | J | K | X | B | M | W | V | Z | retrn | -| | | | | | | | | | | | insrt | -|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| -| | | | | | | | | | | | | -| lctrl | lgui | lalt | ralt | lower | shift | space | raise | left | down | up | right | -| | | | | | | | | home | pgdn | pgup | end | -`-----------------------------------------------------------------------------------------------' -*/ - -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: dvorak */ - [0] = KEYMAP_GRID( ESC, SCLN, COMM, DOT, P, Y, F, G, C, R, L, BSPC, \ - GRV, A, O, E, U, I, D, H, T, N, S, MINS, \ - TAB, QUOT, Q, J, K, X, B, M, W, V, Z, ENT, \ - LCTL, LGUI, LALT, RALT, FN1, LSFT, SPC, FN2, LEFT, DOWN, UP, RGHT), - - /* 1: lower (FN1) */ - [1] = KEYMAP_GRID( F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, \ - FN17, 7, 5, 3, 1, 9, 0, 2, 4, 6, 8, FN18, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, INS, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END), - - /* 2: raise (FN2) */ - [2] = KEYMAP_GRID(PAUS, FN19, FN20, FN21, TRNS, TRNS, TRNS, TRNS, FN22, FN23, FN24, DEL, \ - FN10, SLSH, FN11, FN12, LBRC, EQL, FN13, RBRC, FN14, FN15, BSLS, FN16, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), - -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // lower Fn layer - [2] = ACTION_LAYER_MOMENTARY(2), // raise Fn layer - - // lower row1 - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // ? - - // raise row0 - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLASH), // | - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ - - // raise row1 - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRACKET), // { - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRACKET), // } - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_EQUAL), // + -}; diff --git a/keyboard/quark/common_keymaps/keymap_nathan.c b/keyboard/quark/common_keymaps/keymap_nathan.c deleted file mode 100644 index 5a0900b66..000000000 --- a/keyboard/quark/common_keymaps/keymap_nathan.c +++ /dev/null @@ -1,153 +0,0 @@ -// Author: Nathan Ross Powell <nathanrospowell@gmail.com> -// https://github.com/nathanrosspowell/tmk_keyboard/blob/planck-jack/keyboard/planck/keymap_nathan.c - -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* 0: main layer - * ,-----------------------------------------------------------------------. - * |Tab | q | w | e | r | t | y | u | i | o | p | BS | - * |-----------------------------------------------------------------------| - * |Ctrl | a | s | d | f | g | h | j | k | l | ; | Ret | - * |-----------------------------------------------------------------------| - * |Shift| z | x | c | v | b | n | m | [ | ( | { | < | - * |-----------------------------------------------------------------------| - * |Meta | \ | / | Alt |Lower|Space|Space|Upper|Left |Down | Up |Right| - * `-----------------------------------------------------------------------' - */ - [0] = KEYMAP_GRID( - TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, - LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, - RSFT, Z, X, C, V, B, N, M, LBRC, FN10, FN11, FN12, - LGUI, BSLS, SLSH, LALT, FN0, SPC, SPC, FN1, LEFT, DOWN, UP, RGHT), - - /* 1: fn left/lower layer - * The top row are Visual Studio combos: - * 'Run', 'Breakpoint', 'Step over', 'Step into', 'Set cursor to line' - * 2nd row are key combos: - * 'ctrl-alt-delete', 'ctrl-shift-escape' - * 3rd row are macros keys: - * 'P0' - 'P5' execute a script on Windows machines - * ,-----------------------------------------------------------------------. - * | ESC | F5 | F9 | F10 | F11 |S+F11|CSF10|NLock|Num7 |Num8 |Num9 | Del | - * |-----------------------------------------------------------------------| - * | |C/A/D|C/S/E| Ins |Print|Pause|SLock|Num0 |Num4 |Num5 |Num6 |Num= | - * |-----------------------------------------------------------------------| - * | | P0 | P1 | P2 | P3 | P4 | P5 |Num. |Num1 |Num2 |Num3 |Num/ | - * |-----------------------------------------------------------------------| - * | |User | | | | | | |Home |PgDn |PgUp | End | - * `-----------------------------------------------------------------------' - */ - [1] = KEYMAP_GRID( - ESC, F5, F9, F10, F11, FN30, FN31, NLCK, P7, P8, P9, DEL, - TRNS, FN16, FN17, INS, PSCR, PAUS, SLCK, P0, P4, P5, P6, PEQL, - TRNS, FN2, FN3, FN4, FN5, FN6, FN7, PDOT, P1, P2, P3, PSLS, - TRNS, FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END ), - - /* 2: fn right/raise layer - * ,-----------------------------------------------------------------------. - * | F1 | F2 | F3 | F4 |F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | - * |-----------------------------------------------------------------------| - * | | ! | @ | # | $ | % | ^ | & | * | - | + | = | - * |-----------------------------------------------------------------------| - * | | _ | ' | " | ` | ~ | , | . | ] | ) | } | > | - * |-----------------------------------------------------------------------| - * | |NextT|PrevT| | | | Esc | |Mute |Vol- |Vol+ | P/P | - * `-----------------------------------------------------------------------' - */ - [2] = KEYMAP_GRID( - F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, - TRNS, FN18, FN19, FN20, FN21, FN22, FN23, FN24, FN25, MINS, FN26, PAST, - TRNS, FN27, QUOT, FN28, GRV, FN29, COMM, DOT, RBRC, FN13, FN14, FN15, - TRNS, MNXT, MPRV, TRNS, TRNS, TRNS, ESC, TRNS, MUTE, VOLD, VOLU, MPLY ), -}; - -enum macro_id { - M_P0, - M_P1, - M_P2, - M_P3, - M_P4, - M_P5, - M_USERNAME -}; - -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), // left/lower layer - [1] = ACTION_LAYER_MOMENTARY(2), // right/raise layer - // Program macros - [2] = ACTION_MACRO(M_P0), - [3] = ACTION_MACRO(M_P1), - [4] = ACTION_MACRO(M_P2), - [5] = ACTION_MACRO(M_P3), - [6] = ACTION_MACRO(M_P4), - [7] = ACTION_MACRO(M_P5), - [8] = ACTION_MACRO(M_USERNAME), - // Braces - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_COMMA), // < - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // } - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), // > - // Combo - [16] = ACTION_MODS_KEY(MOD_LALT | MOD_LCTL, KC_DEL), // Ctrl+Alt+Delete - [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_ESC), // Ctrl+Shft+Escape - // Symbols - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & - [25] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * - [26] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + - [27] = ACTION_MODS_KEY(MOD_LSFT, KC_MINUS), // _ - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOTE), // " - [29] = ACTION_MODS_KEY(MOD_LSFT, KC_GRAVE), // ~ - // Debugging - [30] = ACTION_MODS_KEY(MOD_LSFT, KC_F11), // Step into - [31] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F10), // Set cursor to line - }; - -// Run a script and pass a key number to it. This is Windows specific and the script needs to be on your path. -// *open run dialog* keypress.py [PRG_NUM] -#define ADD_PYTHON_PROGRAM_ON_WIN( PRG_NUM ) MACRO( D(LGUI), T(R), U(LGUI), W(100), T(K), T(E), T(Y), T(P), T(R), T(E), T(S), T(S), T(DOT), T(P), T(Y), T(SPC), T(PRG_NUM), END ) -// *return* -#define RUN_PYTHON_PROGRAM_ON_WIN MACRO( T(ENT), END ) - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - keyevent_t event = record->event; - switch (id) { - case M_P0: - return event.pressed ? - ADD_PYTHON_PROGRAM_ON_WIN( 0 ) : - RUN_PYTHON_PROGRAM_ON_WIN; - case M_P1: - return event.pressed ? - ADD_PYTHON_PROGRAM_ON_WIN( 1 ) : - RUN_PYTHON_PROGRAM_ON_WIN; - case M_P2: - return event.pressed ? - ADD_PYTHON_PROGRAM_ON_WIN( 2 ) : - RUN_PYTHON_PROGRAM_ON_WIN; - case M_P3: - return event.pressed ? - ADD_PYTHON_PROGRAM_ON_WIN( 3 ) : - RUN_PYTHON_PROGRAM_ON_WIN; - case M_P4: - return event.pressed ? - ADD_PYTHON_PROGRAM_ON_WIN( 4 ) : - RUN_PYTHON_PROGRAM_ON_WIN; - case M_P5: - return event.pressed ? - ADD_PYTHON_PROGRAM_ON_WIN( 5 ) : - RUN_PYTHON_PROGRAM_ON_WIN; - case M_USERNAME: - return event.pressed ? - MACRO( T(N), T(A), T(T), T(H), T(A), T(N), T(R), T(O), T(S), T(S), T(P), T(O), T(W), T(E), T(L), T(L), END ) : - MACRO_NONE; - } - return MACRO_NONE; -} diff --git a/keyboard/quark/common_keymaps/keymap_peasant.c b/keyboard/quark/common_keymaps/keymap_peasant.c deleted file mode 100644 index ddacb614e..000000000 --- a/keyboard/quark/common_keymaps/keymap_peasant.c +++ /dev/null @@ -1,51 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = KEYMAP( /* Native */ - ESC, Q, W, E, R, T, Y, U, I, O, P, FN2, - BSPC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, - TAB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - DEL, LCTL, NO, LSFT, LALT, SPC, NO, LEFT, DOWN, UP, RGHT), - [1] = KEYMAP( /* QWERTY->PHOTOSHOP */ - DELETE, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, FN1, - O, G, S, U, T, FN27, F21, F10, F11, F7, F8, F9, - TAB, FN4, FN5, FN6, F1, FN7, F18, F19, F23, F20, F22, FN9, - COMM, DOT, FN10, FN11, FN3, SPC, FN12, F2, FN8, F3, F14), - [2] = KEYMAP( /* 2: FN3 PHOTOSHOP */ - ESC, FN25, FN26, NO, NO, NO, NO, NO, NO, NO, NO, NO, - NO, NO, NO, NO, NO, NO, NO, NO, NO, FN19, FN20, FN21, - C, NO, FN22, FN5, NO, FN23, NO, NO, NO, NO, FN13, NO, - FN14, FN15, FN16, FN17, FN3, SPC, FN18, NO, NO, F24, NO), -}; - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_DEFAULT_LAYER_SET(0), // set Qwerty layout - [2] = ACTION_DEFAULT_LAYER_SET(1), // set Photoshop presets - [3] = ACTION_LAYER_ON_OFF(2), // Photoshop function layer - - [4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9), // photo folder AHK - [5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I), // select inverse - [6] = ACTION_MODS_KEY(MOD_LSFT, KC_M), // marquee select - [7] = ACTION_MODS_KEY(MOD_LALT, KC_BSPC), // fill - [8] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_X), // warp - [9] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT | MOD_LSFT, KC_F12), // merge all new layer - [10] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), // zoom out - [11] = ACTION_MODS_KEY(MOD_LCTL, KC_H), // RBG sliders - [12] = ACTION_MODS_KEY(MOD_LCTL, KC_S), // save - [13] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F5), // layer mask from transparancy - [14] = ACTION_MODS_KEY(MOD_LALT, KC_LBRC), // prev layer - [15] = ACTION_MODS_KEY(MOD_LALT, KC_RBRC), // next layer - [16] = ACTION_MODS_KEY(MOD_LCTL, KC_EQL), // zoom in - [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_H), // HSV sliders - [18] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F11), // save as PNG - [19] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F7), // gaussian blur - [20] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F8), // motion blur - [21] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_X), // liquify filter - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // prev layer blending - [23] = ACTION_MODS_KEY(MOD_LSFT | MOD_LALT, KC_N), // normal layer blending - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // next layer blending - [25] = ACTION_MODS_KEY(MOD_LCTL, KC_Z), // step back - [26] = ACTION_MODS_KEY(MOD_LCTL, KC_Y), // step forward - [27] = ACTION_MODS_KEY(MOD_LCTL, KC_R), // rasterize - -}; diff --git a/keyboard/quark/common_keymaps/keymap_reed.c b/keyboard/quark/common_keymaps/keymap_reed.c deleted file mode 100644 index 1aa24e10d..000000000 --- a/keyboard/quark/common_keymaps/keymap_reed.c +++ /dev/null @@ -1,74 +0,0 @@ -#include "keymap_common.h" - -/* - * BUILD: - * Simply run the command below in the keyboard/planck directory - * to build against this keymap - * - * make KEYMAP=reed COMMON_KEYMAP=true - * - * - * DETAILS: - * - * This layout works off of Jack's layout, making some changes that I - * feel significantly improve the function of the keyboard. Major changes - * include adding a "gaming mode" that will allow users to still access - * the number keys 1 through 4 easily for games that require it. Also - * included is the ability to use the tap/hold function for easy use of - * right shift and thumb shift with their tapped companions. - * - */ -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP_GRID( /* Reed */ - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, - LCTL, CAPS, LALT, LGUI, FN2, FN7, SPC, FN1, LEFT, DOWN, UP, RGHT), - -[1] = KEYMAP_GRID( /* Reed EXTREME GAMING */ - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, - LCTL, 1, 2, 3, 4, SPC, FN2, FN1, LEFT, DOWN, UP, RGHT), - -[2] = KEYMAP_GRID( /* Reed RAISE */ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, - TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, - TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY), - -[3] = KEYMAP_GRID( /* Reed LOWER */ - TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, DEL, - TRNS, TRNS, INS, HOME, PGUP, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, - TRNS, TRNS, DEL, END, PGDN, F11, F12, F13, TRNS, VOLD, VOLU, TRNS, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, MPRV, MUTE, MPLY, MNXT), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - RAISE - [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - LOWER - - [3] = ACTION_DEFAULT_LAYER_SET(0), - [4] = ACTION_DEFAULT_LAYER_SET(1), - // Actions for the tap/hold modifiers listed above - [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), - [7] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPC), - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), - - [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), -}; diff --git a/keyboard/quark/common_keymaps/keymap_sean.c b/keyboard/quark/common_keymaps/keymap_sean.c deleted file mode 100644 index 4fe07f701..000000000 --- a/keyboard/quark/common_keymaps/keymap_sean.c +++ /dev/null @@ -1,57 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = KEYMAP( /* Matrix Dvorak */ - QUOT, COMM, DOT, P, Y, SLSH, EQL, F, G, C, R, L, - A, O, E, U, I, ESC, BSPC, D, H, T, N, S, - SCLN, Q, J, K, X, TAB, ENT, B, M, W, V, Z, - LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), - - [1] = KEYMAP( /* Matrix Qwerty */ - Q, W, E, R, T, QUOT, EQL, Y, U, I, O, P, - A, S, D, F, G, ESC, BSPC, H, J, K, L, SCLN, - Z, X, C, V, B, TAB, ENT, N, M, COMM, DOT, SLSH, - LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), - - [2] = KEYMAP( /* fn1 lower */ - F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10, - 1, 2, 3, 4, 5, F18, DEL, 6, 7, 8, 9, 0, - FN3, FN4, TRNS, GRV, MINS, TRNS, TRNS, BSLS, LBRC, RBRC, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN5, HOME, PGDN, PGUP, END), - - [3] = KEYMAP( /* fn2 raise */ - F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10, - F11, F12, F13, F14, F15, F18, DEL, F16, F17, F18, F19, F20, - FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT, PWR, LSFT,PAUSE, RSFT, - LEFT, DOWN, UP, RGHT, FN5, TRNS, TRNS, MNXT, VOLD, VOLU, MUTE), - - [4] = KEYMAP( /* lower + raise */ - LEFT, DOWN, UP, RGHT, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, UP, RGHT, - HOME, PGDN, PGUP, END, TRNS, F18, DEL, TRNS, HOME, PGDN, PGUP, END, - FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT, PWR, MPLY, RSFT, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MNXT, VOLD, VOLU, MUTE), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay LOWER - [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay RAISE - [3] = ACTION_DEFAULT_LAYER_SET(0), - [4] = ACTION_DEFAULT_LAYER_SET(1), - [5] = ACTION_LAYER_MOMENTARY(4), // to Fn overlay LOWER + RAISE - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), -}; diff --git a/keyboard/quark/common_keymaps/keymap_shane.c b/keyboard/quark/common_keymaps/keymap_shane.c deleted file mode 100644 index d4e40fe63..000000000 --- a/keyboard/quark/common_keymaps/keymap_shane.c +++ /dev/null @@ -1,100 +0,0 @@ -// https://github.com/shanecelis/tmk_keyboard/blob/master/keyboard/planck/keymap_shane.c - -#include "keymap_common.h" -#include "action_layer.h" -#include "action.h" -#include "action_util.h" - -/* - Shane's Planck Layout - http://www.keyboard-layout-editor.com/#/layouts/015d9011102619d7695c86ffe57cf441 -*/ -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = KEYMAP_AND_SWAP( /* Base */ - TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, - LCTL, A, S, D, F, G, H, J, K, L, SCLN, BSPC, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, - /*ALPHA*/FN3, /*HYPER*/ /*SUPER*/LGUI, /*META*/LALT, LCTL, FN2, FN6, FN1, LEFT, DOWN, UP, RGHT), - [2] = KEYMAP_AND_SWAP( /* More modifiers */ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RCTL, RALT, RGUI, TRNS), - [4] = KEYMAP_AND_SWAP( /* WASD */ - TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, LEFT, DOWN, RIGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), - [6] = KEYMAP_AND_SWAP( /* Raise/FN1 */ - FN23, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, EQL, - TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, ENT, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, BSLS, TRNS, - PAUS, TRNS, TRNS, TRNS, TRNS, BSPC, TRNS, MUTE, PGUP, PGDN, MNXT), - [8] = KEYMAP_AND_SWAP( /* Lower/FN2 */ - ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN19, FN20, TRNS, - TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN24, FN25, LBRC, RBRC, TRNS, TRNS, - FN4, TRNS, TRNS, TRNS, TRNS, ENT, TRNS, MPLY, VOLD, VOLU, MPRV), -}; - -enum function_id { - SPACE_FN, -}; - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch (id) { - case SPACE_FN: - if (record->event.pressed) { - // Change the keyboard maps. - // Whatever even layer's are on, turn on the odd one's too. - for (uint8_t i = 0; i < 9; i += 2) { - if (layer_state & (1UL << i)) - layer_on(i + 1); - } - layer_on(1); - } else { - // turn off all the even layers. - for (uint8_t i = 0; i < 9; i += 2) - layer_off(i + 1); - - if (record->tap.count != 0) { - // Space was tapped rather than used like a modifier. - // So send a space up and down event. - add_key(KC_SPC); - send_keyboard_report(); - del_key(KC_SPC); - send_keyboard_report(); - } - } - break; - } -} - - - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(6), // to fist Fn overlay - [2] = ACTION_LAYER_MOMENTARY(8), // to second Fn overlay - [3] = ACTION_LAYER_TOGGLE(2), // toggle more modifiers - [4] = ACTION_LAYER_TOGGLE(4), // toggle wasd - [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), - [6] = ACTION_FUNCTION_TAP(SPACE_FN), - - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [25] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [26] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), -}; diff --git a/keyboard/quark/common_keymaps/keymap_simon.c b/keyboard/quark/common_keymaps/keymap_simon.c deleted file mode 100644 index 37951364b..000000000 --- a/keyboard/quark/common_keymaps/keymap_simon.c +++ /dev/null @@ -1,44 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( /* Jack */ - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - TAB, A, S, D, F, G, H, J, K, L, DOT, ENT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SCLN, DEL, - LCTL, ENT, LALT, CAPS, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), -[1] = KEYMAP( /* Jack RAISE */ - TRNS, F1, F2, F3, F4, NO, FN11, FN9, FN12, NO, FN14, TRNS, - TRNS, F5, F6, F7, F8, FN16, SLSH, MINS, EQL, LBRC, FN8, TRNS, - TRNS, F9, F10, F11, F12, F15, F16, FN22, SCLN, MINS, QUOT, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), -[2] = KEYMAP( /* Jack LOWER */ - FN22, 1, 2, 3, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, - TRNS, 4, 5, 6, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, - TRNS, 7, 8, 9, 0, FN28, FN15, F7, F8, F9, F10, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - - [8] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), - [9] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), - - [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), -}; diff --git a/keyboard/quark/common_keymaps/keymap_tim.c b/keyboard/quark/common_keymaps/keymap_tim.c deleted file mode 100644 index 7444f3877..000000000 --- a/keyboard/quark/common_keymaps/keymap_tim.c +++ /dev/null @@ -1,44 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - TAB, A, S, D, F, G, H, J, K, L, SCLN, ENT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, - LCTL, LALT, DEL, LGUI, FN2, SPC, FN1, F2, F5, F9, F12), -[2] = KEYMAP( /* RAISE */ - TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, - GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS), -[3] = KEYMAP( /* LOWER */ - TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, - FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay - - [3] = ACTION_DEFAULT_LAYER_SET(0), - [4] = ACTION_DEFAULT_LAYER_SET(1), - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), - [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), - [29] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), -}; diff --git a/keyboard/quark/common_keymaps/keymap_wilba.c b/keyboard/quark/common_keymaps/keymap_wilba.c deleted file mode 100644 index 9781f8fcd..000000000 --- a/keyboard/quark/common_keymaps/keymap_wilba.c +++ /dev/null @@ -1,56 +0,0 @@ -#include "keymap_common.h" - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( /* Wilba */ - FN27, FN28, FN29, E, R, T, Y, U, I, O, P, BSPC, - TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), -[1] = KEYMAP( /* Wilba Alternate */ - ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, - TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, - LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), -[2] = KEYMAP( /* Wilba LOWER */ - TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, - TRNS, F11, F12, LBRC, RBRC, FN20, EQL, FN23, FN24, MINS, FN21, TRNS, - TRNS, BSLS, GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), -[3] = KEYMAP( /* Wilba RAISE */ - TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS, - TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, - TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS), -}; -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(2), // LOWER - [2] = ACTION_LAYER_MOMENTARY(3), // RAISE - - [3] = ACTION_DEFAULT_LAYER_SET(0), - [4] = ACTION_DEFAULT_LAYER_SET(1), - - [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! - [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ - [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # - [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ - [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % - [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ - [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & - [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * - [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( - [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) - - [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _ - [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + - [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~ - [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { - [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // } - [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // | - - [26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), - - [27] = ACTION_BACKLIGHT_TOGGLE(), - [28] = ACTION_BACKLIGHT_INCREASE(), - [29] = ACTION_BACKLIGHT_DECREASE() - -}; diff --git a/keyboard/quark/config.h b/keyboard/quark/config.h deleted file mode 100644 index 7f9a48ce4..000000000 --- a/keyboard/quark/config.h +++ /dev/null @@ -1,74 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER jackhumbert -#define PRODUCT Quark -#define DESCRIPTION t.m.k. keyboard firmware for the Quark - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */ -#define BACKLIGHT_LEVELS 15 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - - - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboard/quark/extended_keymap_common.c b/keyboard/quark/extended_keymap_common.c deleted file mode 100644 index f8fc3209f..000000000 --- a/keyboard/quark/extended_keymap_common.c +++ /dev/null @@ -1,184 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "extended_keymap_common.h" -#include "report.h" -#include "keycode.h" -#include "action_layer.h" -#include "action.h" -#include "action_macro.h" -#include "debug.h" - - -static action_t keycode_to_action(uint16_t keycode); - - -/* converts key to action */ -action_t action_for_key(uint8_t layer, keypos_t key) -{ - // 16bit keycodes - important - uint16_t keycode = keymap_key_to_keycode(layer, key); - - if (keycode >= 0x0100 && keycode < 0x2000) { - // Has a modifier - action_t action; - // Split it up - action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF); - return action; - } else if (keycode >= 0x2000 && keycode < 0x3000) { - // Is a shortcut for function layer, pull last 12bits - return keymap_func_to_action(keycode & 0xFFF); - } else if (keycode >= 0x3000 && keycode < 0x4000) { - action_t action; - action.code = ACTION_MACRO(keycode & 0xFF); - return action; - } - - switch (keycode) { - case KC_FN0 ... KC_FN31: - return keymap_fn_to_action(keycode); -#ifdef BOOTMAGIC_ENABLE - case KC_CAPSLOCK: - case KC_LOCKING_CAPS: - if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) { - return keycode_to_action(KC_LCTL); - } - return keycode_to_action(keycode); - case KC_LCTL: - if (keymap_config.swap_control_capslock) { - return keycode_to_action(KC_CAPSLOCK); - } - return keycode_to_action(KC_LCTL); - case KC_LALT: - if (keymap_config.swap_lalt_lgui) { - if (keymap_config.no_gui) { - return keycode_to_action(ACTION_NO); - } - return keycode_to_action(KC_LGUI); - } - return keycode_to_action(KC_LALT); - case KC_LGUI: - if (keymap_config.swap_lalt_lgui) { - return keycode_to_action(KC_LALT); - } - if (keymap_config.no_gui) { - return keycode_to_action(ACTION_NO); - } - return keycode_to_action(KC_LGUI); - case KC_RALT: - if (keymap_config.swap_ralt_rgui) { - if (keymap_config.no_gui) { - return keycode_to_action(ACTION_NO); - } - return keycode_to_action(KC_RGUI); - } - return keycode_to_action(KC_RALT); - case KC_RGUI: - if (keymap_config.swap_ralt_rgui) { - return keycode_to_action(KC_RALT); - } - if (keymap_config.no_gui) { - return keycode_to_action(ACTION_NO); - } - return keycode_to_action(KC_RGUI); - case KC_GRAVE: - if (keymap_config.swap_grave_esc) { - return keycode_to_action(KC_ESC); - } - return keycode_to_action(KC_GRAVE); - case KC_ESC: - if (keymap_config.swap_grave_esc) { - return keycode_to_action(KC_GRAVE); - } - return keycode_to_action(KC_ESC); - case KC_BSLASH: - if (keymap_config.swap_backslash_backspace) { - return keycode_to_action(KC_BSPACE); - } - return keycode_to_action(KC_BSLASH); - case KC_BSPACE: - if (keymap_config.swap_backslash_backspace) { - return keycode_to_action(KC_BSLASH); - } - return keycode_to_action(KC_BSPACE); -#endif - default: - return keycode_to_action(keycode); - } -} - - -/* Macro */ -__attribute__ ((weak)) -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -} - -/* Function */ -__attribute__ ((weak)) -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) -{ -} - -/* translates keycode to action */ -static action_t keycode_to_action(uint16_t keycode) -{ - action_t action; - switch (keycode) { - case KC_A ... KC_EXSEL: - case KC_LCTRL ... KC_RGUI: - action.code = ACTION_KEY(keycode); - break; - case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE: - action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode)); - break; - case KC_AUDIO_MUTE ... KC_WWW_FAVORITES: - action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode)); - break; - case KC_MS_UP ... KC_MS_ACCEL2: - action.code = ACTION_MOUSEKEY(keycode); - break; - case KC_TRNS: - action.code = ACTION_TRANSPARENT; - break; - default: - action.code = ACTION_NO; - break; - } - return action; -} - - -/* translates key to keycode */ -uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - // Read entire word (16bits) - return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]); -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint16_t keycode) -{ - return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; -} - -action_t keymap_func_to_action(uint16_t keycode) -{ - // For FUNC without 8bit limit - return (action_t){ .code = pgm_read_word(&fn_actions[(int)keycode]) }; -} diff --git a/keyboard/quark/extended_keymap_common.h b/keyboard/quark/extended_keymap_common.h deleted file mode 100644 index 66712459c..000000000 --- a/keyboard/quark/extended_keymap_common.h +++ /dev/null @@ -1,152 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef KEYMAP_H -#define KEYMAP_H - -#include <stdint.h> -#include <stdbool.h> -#include "action.h" -#include <avr/pgmspace.h> -#include "keycode.h" -#include "keymap.h" -#include "action_macro.h" -#include "report.h" -#include "host.h" -#include "print.h" -#include "debug.h" - -#ifdef BOOTMAGIC_ENABLE -/* NOTE: Not portable. Bit field order depends on implementation */ -typedef union { - uint16_t raw; - struct { - bool swap_control_capslock:1; - bool capslock_to_control:1; - bool swap_lalt_lgui:1; - bool swap_ralt_rgui:1; - bool no_gui:1; - bool swap_grave_esc:1; - bool swap_backslash_backspace:1; - bool nkro:1; - }; -} keymap_config_t; -keymap_config_t keymap_config; -#endif - -/* translates key to keycode */ -uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key); - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint16_t keycode); - -/* translates Fn keycode to action */ -action_t keymap_func_to_action(uint16_t keycode); - -extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; -extern const uint16_t fn_actions[]; - -// Ability to use mods in layouts -#define LCTL(kc) kc | 0x0100 -#define LSFT(kc) kc | 0x0200 -#define LALT(kc) kc | 0x0400 -#define LGUI(kc) kc | 0x0800 -#define RCTL(kc) kc | 0x1100 -#define RSFT(kc) kc | 0x1200 -#define RALT(kc) kc | 0x1400 -#define RGUI(kc) kc | 0x1800 - -// Alias for function layers than expand past FN31 -#define FUNC(kc) kc | 0x2000 - -// Aliases -#define S(kc) LSFT(kc) -#define F(kc) FUNC(kc) - -// For software implementation of colemak -#define CM_Q KC_Q -#define CM_W KC_W -#define CM_F KC_E -#define CM_P KC_R -#define CM_G KC_T -#define CM_J KC_Y -#define CM_L KC_U -#define CM_U KC_I -#define CM_Y KC_O -#define CM_SCLN KC_P - -#define CM_A KC_A -#define CM_R KC_S -#define CM_S KC_D -#define CM_T KC_F -#define CM_D KC_G -#define CM_H KC_H -#define CM_N KC_J -#define CM_E KC_K -#define CM_I KC_L -#define CM_O KC_SCLN - -#define CM_Z KC_Z -#define CM_X KC_X -#define CM_C KC_C -#define CM_V KC_V -#define CM_B KC_B -#define CM_K KC_N -#define CM_M KC_M -#define CM_COMM KC_COMM -#define CM_DOT KC_DOT -#define CM_SLSH KC_SLSH - -// Make it easy to support these in macros -#define KC_CM_Q CM_Q -#define KC_CM_W CM_W -#define KC_CM_F CM_F -#define KC_CM_P CM_P -#define KC_CM_G CM_G -#define KC_CM_J CM_J -#define KC_CM_L CM_L -#define KC_CM_U CM_U -#define KC_CM_Y CM_Y -#define KC_CM_SCLN CM_SCLN - -#define KC_CM_A CM_A -#define KC_CM_R CM_R -#define KC_CM_S CM_S -#define KC_CM_T CM_T -#define KC_CM_D CM_D -#define KC_CM_H CM_H -#define KC_CM_N CM_N -#define KC_CM_E CM_E -#define KC_CM_I CM_I -#define KC_CM_O CM_O - -#define KC_CM_Z CM_Z -#define KC_CM_X CM_X -#define KC_CM_C CM_C -#define KC_CM_V CM_V -#define KC_CM_B CM_B -#define KC_CM_K CM_K -#define KC_CM_M CM_M -#define KC_CM_COMM CM_COMM -#define KC_CM_DOT CM_DOT -#define KC_CM_SLSH CM_SLSH - -#define M(kc) kc | 0x3000 - -#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE) - -#endif diff --git a/keyboard/quark/extended_keymaps/extended_keymap_default.c b/keyboard/quark/extended_keymaps/extended_keymap_default.c deleted file mode 100644 index 7ddc1aad9..000000000 --- a/keyboard/quark/extended_keymaps/extended_keymap_default.c +++ /dev/null @@ -1,40 +0,0 @@ -#include "extended_keymap_common.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = { - {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - { KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_ENT}, - {KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT}, - { KC_LCTL, KC_LALT, KC_LGUI, KC_NO, FUNC(2), KC_SPC, KC_NO, KC_NO, FUNC(1), KC_LEFT, KC_DOWN, KC_RGHT} -}, -[1] = { - {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, - { KC_TAB, KC_A, KC_S,S(KC_BSLS), S(KC_COMM),S(KC_DOT),S(KC_MINS),S(KC_GRV),S(KC_LBRC), S(KC_RBRC), KC_NO, KC_ENT}, - {KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_SCLN, S(KC_SCLN), KC_HOME, KC_PGUP, KC_RSFT}, - { KC_LCTL, KC_LALT, KC_LGUI, KC_NO, FUNC(2), KC_SPC, KC_NO, KC_NO, FUNC(1), KC_SCLN, KC_QUOT, KC_SLSH} -}, -[2] = { - {KC_ESC, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC}, - { KC_TAB, KC_A, KC_S, KC_D, KC_BSLS, KC_SLSH, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_NO, KC_ENT}, - {KC_CAPS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, S(KC_7), S(KC_EQL), KC_COMM, KC_UP, KC_RSFT}, - { KC_LCTL, KC_LALT, KC_LGUI, KC_NO, FUNC(2), KC_SPC, KC_NO, KC_NO, FUNC(1), KC_LEFT, KC_DOWN, KC_RGHT} -} -}; - - -const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay - [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - return MACRO_NONE; - break; - } - return MACRO_NONE; -}; diff --git a/keyboard/quark/keymap_common.c b/keyboard/quark/keymap_common.c deleted file mode 100644 index fdb1769e1..000000000 --- a/keyboard/quark/keymap_common.c +++ /dev/null @@ -1,30 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include "keymap_common.h" - - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; -} diff --git a/keyboard/quark/keymap_common.h b/keyboard/quark/keymap_common.h deleted file mode 100644 index c74c7e9a2..000000000 --- a/keyboard/quark/keymap_common.h +++ /dev/null @@ -1,86 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H - -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "keycode.h" -#include "action.h" -#include "action_macro.h" -#include "report.h" -#include "host.h" -#include "print.h" -#include "debug.h" -#include "keymap.h" - - -extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; -extern const uint16_t fn_actions[]; - - -// MIT Layout -/* - * ,-----------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |-----------------------------------------------------------------------| - * | | | | | | | | | | | | | - * |-----------------------------------------------------------------------| - * | | | | | | | | | | | | | - * |-----------------------------------------------------------------------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------' - */ -#define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ - K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_NO, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ -} - -// Grid Layout -/* - * ,-----------------------------------------------------------------------. - * | | | | | | | | | | | | | - * |-----------------------------------------------------------------------| - * | | | | | | | | | | | | | - * |-----------------------------------------------------------------------| - * | | | | | | | | | | | | | - * |-----------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `-----------------------------------------------------------------------' - */ -#define KEYMAP_GRID( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ -} - - -#endif diff --git a/keyboard/quark/led.c b/keyboard/quark/led.c deleted file mode 100644 index 1f3643488..000000000 --- a/keyboard/quark/led.c +++ /dev/null @@ -1,38 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include "stdint.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - // Using PE6 Caps Lock LED - if (usb_led & (1<<USB_LED_CAPS_LOCK)) - { - // Output high. - DDRE |= (1<<6); - PORTE |= (1<<6); - } - else - { - // Output low. - DDRE &= ~(1<<6); - PORTE &= ~(1<<6); - } -} diff --git a/keyboard/quark/matrix.c b/keyboard/quark/matrix.c deleted file mode 100644 index 2f2dbdb10..000000000 --- a/keyboard/quark/matrix.c +++ /dev/null @@ -1,193 +0,0 @@ -/* -Copyright 2012 Jun Wako -Generated by planckkeyboard.com (2014 Jack Humbert) - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - - -#ifndef DEBOUNCE -# define DEBOUNCE 10 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } -} - -uint8_t matrix_scan(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - DDRB &= ~(1<<6 | 1<<5 | 1<<4); - PORTB |= (1<<6 | 1<<5 | 1<<4); - DDRD &= ~(1<<7 | 1<<6 | 1<<4); - PORTD |= (1<<7 | 1<<6 | 1<<4); - DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); - PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); - -} - -static matrix_row_t read_cols(void) -{ - return (PIND&(1<<4) ? 0 : (1<<0)) | - (PIND&(1<<6) ? 0 : (1<<1)) | - (PIND&(1<<7) ? 0 : (1<<2)) | - (PINB&(1<<4) ? 0 : (1<<3)) | - (PINB&(1<<5) ? 0 : (1<<4)) | - (PINB&(1<<6) ? 0 : (1<<5)) | - (PINF&(1<<7) ? 0 : (1<<6)) | - (PINF&(1<<6) ? 0 : (1<<7)) | - (PINF&(1<<5) ? 0 : (1<<8)) | - (PINF&(1<<4) ? 0 : (1<<9)) | - (PINF&(1<<1) ? 0 : (1<<10)) | - (PINF&(1<<0) ? 0 : (1<<11)); - -} - -static void unselect_rows(void) -{ - DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); - PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3); - -} - -static void select_row(uint8_t row) -{ - switch (row) { - case 0: - DDRB |= (1<<0); - PORTB &= ~(1<<0); - break; - case 1: - DDRB |= (1<<1); - PORTB &= ~(1<<1); - break; - case 2: - DDRB |= (1<<2); - PORTB &= ~(1<<2); - break; - case 3: - DDRB |= (1<<3); - PORTB &= ~(1<<3); - break; - - } -} |