diff options
Diffstat (limited to 'keyboards/amjpad')
| -rw-r--r-- | keyboards/amjpad/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/amjpad/amjpad.c | 30 | ||||
| -rw-r--r-- | keyboards/amjpad/amjpad.h | 61 | ||||
| -rw-r--r-- | keyboards/amjpad/config.h | 94 | ||||
| -rw-r--r-- | keyboards/amjpad/keymaps/default/keymap.c | 101 | ||||
| -rw-r--r-- | keyboards/amjpad/keymaps/max/keymap.c | 102 | ||||
| -rw-r--r-- | keyboards/amjpad/keymaps/ortho_left/keymap.c | 65 | ||||
| -rw-r--r-- | keyboards/amjpad/keymaps/ortho_right/keymap.c | 65 | ||||
| -rw-r--r-- | keyboards/amjpad/rules.mk | 66 |
9 files changed, 587 insertions, 0 deletions
diff --git a/keyboards/amjpad/Makefile b/keyboards/amjpad/Makefile new file mode 100644 index 000000000..4e2a6f00f --- /dev/null +++ b/keyboards/amjpad/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/amjpad/amjpad.c b/keyboards/amjpad/amjpad.c new file mode 100644 index 000000000..ac5991bd0 --- /dev/null +++ b/keyboards/amjpad/amjpad.c @@ -0,0 +1,30 @@ +#include "amjpad.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRD |= (1<<6); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_NUM_LOCK)) { + // Turn numlock on + PORTD &= ~(1<<6); + } else { + // Turn numlock off + PORTD |= (1<<6); + } +} diff --git a/keyboards/amjpad/amjpad.h b/keyboards/amjpad/amjpad.h new file mode 100644 index 000000000..ffba1c9b9 --- /dev/null +++ b/keyboards/amjpad/amjpad.h @@ -0,0 +1,61 @@ +#ifndef AMJPAD_H +#define ADMJPAD_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* AMJPAD matrix layout + * ,-------------------. + * | 00 | 01 | 02 | 03 | + * |----|----|----|----| + * | 10 | 11 | 12 | 13 | + * |----|----|----|----| + * | 20 | 21 | 22 | | + * |----|----|----| 23 | + * | 30 | 31 | 32 | | + * |----|----|----|----| + * | 40 | 41 | 42 | | + * |----|----|----| 43 | + * | 50 | 52 | | + * `-------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, \ + k40, k41, k42, k43, \ + k50, k52 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, XXX}, \ + {k40, k41, k42, k43}, \ + {k50, XXX, k52, XXX} \ +} +#define MAXKEYMAP( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43, \ + k50, k51, k52, k53\ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, k33}, \ + {k40, k41, k42, k43}, \ + {k50, k51, k52, k53} \ +} +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/amjpad/config.h b/keyboards/amjpad/config.h new file mode 100644 index 000000000..1a26d2ab6 --- /dev/null +++ b/keyboards/amjpad/config.h @@ -0,0 +1,94 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER AMJ +#define PRODUCT PAD +#define DESCRIPTION QMK keyboard firmware for AMJ PAD + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5, D0 } +#define MATRIX_COL_PINS { F1, F0, E6, C7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN E2 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/amjpad/keymaps/default/keymap.c b/keyboards/amjpad/keymaps/default/keymap.c new file mode 100644 index 000000000..362afd107 --- /dev/null +++ b/keyboards/amjpad/keymaps/default/keymap.c @@ -0,0 +1,101 @@ +#include "amjpad.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----| + | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ + +[_BL] = KEYMAP( + KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \ + KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, LT(_FL,KC_PDOT)), + + /* Keymap _FL: Function Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----|RST | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ +[_FL] = KEYMAP( + + KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, RESET, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, LT(_FL,KC_PDOT)), +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/amjpad/keymaps/max/keymap.c b/keyboards/amjpad/keymaps/max/keymap.c new file mode 100644 index 000000000..926a494a9 --- /dev/null +++ b/keyboards/amjpad/keymaps/max/keymap.c @@ -0,0 +1,102 @@ +#include "amjpad.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * |Esc |Setp| - | = | + * |----|----|----|----| + * | F1 | F2 | F3 | F4 | + * |----|----|----|----| + * | 7 | 8 | 9 | - | + * |----|----|----|----| + * | 4 | 5 | 6 | LF | + * |----|----|----|----| + * | 1 | 2 | 3 | \ | + * |----|----|----|----| + * |Left|Down| Up |Rght| + * `-------------------' + */ + +[_BL] = MAXKEYMAP( + + KC_ESC, KC_TAB, KC_MINS,KC_EQL, \ + KC_F1, KC_F2, KC_F3, KC_F4, \ + KC_P7, KC_P8, KC_P9, KC_PMNS, \ + KC_P4, KC_P5, KC_P6, KC_PENT, \ + KC_P1, KC_P2, KC_P3, KC_BSLS, \ + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT), + + /* Keymap _FL: Function Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----|RST | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ +[_FL] = MAXKEYMAP( + + KC_ESC,KC_TAB,KC_BSPC,KC_PEQL, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, RESET, \ + KC_P4, KC_P5, KC_P6, KC_PENT, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT), +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/amjpad/keymaps/ortho_left/keymap.c b/keyboards/amjpad/keymaps/ortho_left/keymap.c new file mode 100644 index 000000000..d3e4d9944 --- /dev/null +++ b/keyboards/amjpad/keymaps/ortho_left/keymap.c @@ -0,0 +1,65 @@ +#include "amjpad.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * | T | G | B |Spac| + * |----|----|----|----| + * | R | F | V | Fn | + * |----|----|----|----| + * | E | D | C | OS | + * |----|----|----|----| + * | W | S | X | Alt| + * |----|----|----|----| + * | Q | A | Z | Ctl| + * |----|----|----|----| + * | Esc| Tab|Shft| Fn2| + * `-------------------' + */ + +[_BL] = MAXKEYMAP( + + KC_T, KC_G, KC_B, KC_SPACE,\ + KC_R, KC_F, KC_V, MO(1), \ + KC_E, KC_D, KC_C, KC_LGUI, \ + KC_W, KC_S, KC_X, KC_LALT, \ + KC_Q, KC_A, KC_Z, KC_LCTL, \ + KC_TAB, KC_ESC, KC_LSHIFT, MO(1)), + + /* Keymap _FL: Function Layer + * ,-------------------. + * | 5 | F5 | F11|Spac| + * |----|----|----|----| + * | 4 | F4 | F10| | + * |----|----|----|----| + * | 3 | F3 | F9 | OS | + * |----|----|----|----| + * | 2 | F2 | F8 | Alt| + * |----|----|----|----| + * | 1 | F1 | F7 | Ctl| + * |----|----|----|----| + * | ` | Del|Shft| | + * `-------------------' + */ +[_FL] = MAXKEYMAP( + + KC_5, KC_F5, KC_F11, _______, \ + KC_4, KC_F4, KC_F10, _______, \ + KC_3, KC_F3, KC_F9, _______, \ + KC_2, KC_F2, KC_F8, _______, \ + KC_1, KC_F1, KC_F7, _______, \ + KC_GRV,KC_DEL, _______, _______), +}; diff --git a/keyboards/amjpad/keymaps/ortho_right/keymap.c b/keyboards/amjpad/keymaps/ortho_right/keymap.c new file mode 100644 index 000000000..33e599abd --- /dev/null +++ b/keyboards/amjpad/keymaps/ortho_right/keymap.c @@ -0,0 +1,65 @@ +#include "amjpad.h" + +#ifdef RGBLIGHT_ENABLE +#include "rgblight.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * |Spac| N | H | Y | + * |----|----|----|----| + * | Fn | M | J | U | + * |----|----|----|----| + * |Left| , | K | I | + * |----|----|----|----| + * |Down| . | L | O | + * |----|----|----|----| + * | Up | / | ; | P | + * |----|----|----|----| + * |Rght| Ret| " |Bspc| + * `-------------------' + */ + +[_BL] = MAXKEYMAP( + + KC_SPACE, KC_N, KC_H, KC_Y, \ + MO(1), KC_M, KC_J, KC_U, \ + KC_LEFT, KC_COMM, KC_K, KC_I, \ + KC_DOWN, KC_DOT, KC_L, KC_O, \ + KC_UP, KC_SLASH, KC_SCLN, KC_P, \ + KC_RIGHT, KC_ENT, KC_QUOT, KC_BSPC), + + /* Keymap _FL: Function Layer + * ,-------------------. + * |Esc | F12| F6 | 6 | + * |----|----|----|----| + * | NL | M | - | 7 | + * |----|----|----|----| + * |Left| , | = | 8 | + * |----|----|----|----| + * |Down| . | [ | 9 | + * |----|----|----|----| + * | Up | / | ] | 0 | + * |----|----|----|----| + * |Rght| Ret| \ | Del| + * `-------------------' + */ +[_FL] = MAXKEYMAP( + + _______, KC_F12, KC_F6, KC_6, \ + _______, _______, KC_MINS, KC_7, \ + _______, _______, KC_EQL, KC_8, \ + _______, _______, KC_LBRC, KC_9, \ + _______, _______, KC_RBRC, KC_0, \ + _______, _______, KC_BSLS, KC_DEL), +}; diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk new file mode 100644 index 000000000..dd5b2bbe0 --- /dev/null +++ b/keyboards/amjpad/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID |