diff options
Diffstat (limited to 'keyboards/converter/hp_46010a/readme.md')
| -rw-r--r-- | keyboards/converter/hp_46010a/readme.md | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/keyboards/converter/hp_46010a/readme.md b/keyboards/converter/hp_46010a/readme.md new file mode 100644 index 000000000..2321faa6e --- /dev/null +++ b/keyboards/converter/hp_46010a/readme.md @@ -0,0 +1,52 @@ +# HP 46010A + + + +A converter for the eponymous keyboard. + +Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions) +Hardware Supported: HP 46010A, Teensy 2.0 + +Make example for this keyboard (after setting up your build environment): + + make converter/HP_46010A:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +to get a matrix created if your board uses a different one (i used the US layout) please see the following gists: +for the matrix itself: https://gist.github.com/listofoptions/cdf70d94767e9c6c027741850a24c568 +for the program to generate the matrix: https://gist.github.com/listofoptions/d245e370678024edbe5bed8c8ab17999 + +to build the actual converter, you are going to need to either splice into the a connector or, use a multi-meter to buzz/ohm out which wires go where. +from the bottom of the pcb the pins are arraged as follows: + + + 4 5 6 + 3 2 1 + + +connect a six pin modular connector of the 6p6c variaty. +then lop off the other end of the cable, striping the wires inside. +use the ohm-meter to find the corresponding wire for each pin on the bottom of the pcb + +the pin meanings are as follows: +1 reset +2 no connection +3 vcc +4 data out +5 clock +6 ground + +wire the ground and power pins to ground and 5v power on the teensy (or other avr device of your choice) +connect +on the teensy the connection is as follows + + +teensy | HP 46010A +----|----- +gnd | gnd (6) +vcc | vcc (3) +PB0 | reset (1) +PB1 | clock (5) +PB3 | data out (4) +gnd | no connection (2) -- optional |