summaryrefslogtreecommitdiffstats
path: root/keyboards/hadron/ver3/rules.mk
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/hadron/ver3/rules.mk')
-rw-r--r--keyboards/hadron/ver3/rules.mk46
1 files changed, 7 insertions, 39 deletions
diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk
index 2a8662315..599fb53fa 100644
--- a/keyboards/hadron/ver3/rules.mk
+++ b/keyboards/hadron/ver3/rules.mk
@@ -1,57 +1,25 @@
-# project specific files
-SRC = matrix.c
-
-## chip/board settings
-# - the next two should match the directories in
-# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-# or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-# or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
+# projecct specific files
# Cortex version
-MCU = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+MCU = STM32F303
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
+COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
-CUSTOM_MATRIX = yes # Custom matrix file
+CUSTOM_MATRIX = no # Custom matrix file
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = no
+RGB_MATRIX_ENABLE = no #WS2812 once arm_rgb is implemented
HAPTIC_ENABLE += DRV2605L
QWIIC_ENABLE += MICRO_OLED
+ENCODER_ENABLER = yes
# SERIAL_LINK_ENABLE = yes