diff options
Diffstat (limited to 'keyboards/handwired/bluepill/readme.md')
| -rw-r--r-- | keyboards/handwired/bluepill/readme.md | 60 |
1 files changed, 60 insertions, 0 deletions
diff --git a/keyboards/handwired/bluepill/readme.md b/keyboards/handwired/bluepill/readme.md new file mode 100644 index 000000000..8b53f12f4 --- /dev/null +++ b/keyboards/handwired/bluepill/readme.md @@ -0,0 +1,60 @@ + +# BluePill handwired + +Keyboards using a BluePill controller (generic Chinese STM32F103C8T6) and based on the [KC64 of Xydane](https://github.com/Xydane/qmk_firmware). + +Keyboard Maintainer: [FPazos](https://github.com/fpazos), but I hope to leave the project in better hands. +Hardware Supported: Bluepill STM32F103C8T6 +Hardware Availability: Everywhere + +Make example for BluePill70 (after setting up your build environment): + +make handwired/bluepill/bluepill70:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +Read everything before using it. + +## Introduction + +First of all thanks to [Xydane](https://github.com/Xydane) at [GeekHack](https://geekhack.org/) for his advice and his repository, without it you couldn't be reading this. + +That's was an attempt to create a firmware using an STM32F103C8T6, and in a "future", also developing a revision for split keyboards. But... +As I'm mainly a web developer I didn't even get to debug the controller, not to speak about ChibiOS. So I just structured everything, created a working 70% layout and leave the project to someone with more knowledge and patience. + +## Resistor fix + +If you want to use the Bluepill USB port, it's very likely that you need to solder a 1.8 kΩ between PA12 and 3.3V. That depends on the PC's motherboard but I needed, more info [here](https://wiki.stm32duino.com/index.php?title=Blue_Pill). + +## No bootloader + +Neither Xydane or I used the bootloader, the code for it is commented and you can use it if you want. I didn't achieve to run it and just used a serial programmer (FTDI, ST-LINK). + +## Adding layouts and revisions + +If you want to create new layouts just add them to the keymaps folder. If you prefer to develop a more complex revision just copy the bluepill70 folder, rename it and create a new keymap in /keymap.c (I tried to divide the project even more but it didn't worked). + +## Pinout + +That's the pinout; + + A5 A15 A10 A9 A8 B15 B14 B13 B12 B11 B10 B1 B0 A7 A6 + B9 ESC| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10| F11| F12| PSC| PGU| PGD + B8 GRA| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ' | ¡ | BCKS | DEL + B7 TAB| Q | W | E | R | T | Y | U | I | O | P | ` | + | | HOM + B6 CAP| A | S | D | F | G | H | J | K | L | Ñ | ´ | Ç | ENTER | END + B5 LSI| < | Z | X | C | V | B | N | M | , | . | - | RSHIF | UP | FNT + A4 LCT| WIN| ALT| ESPACE | ALG| FN | RCT| LEF| DOW| RIG + +And the wiring: +ISO + +ANSI + + +It also uses: +PC13: Caps Lock led. + +Backlight dual color leds, my version is for common anode that's more common, for leds with common anode just replace the palSetPad with palClearPad and viceversa. +PA1: Backlight color A. +PA0: Backlight color B.
\ No newline at end of file |