diff options
Diffstat (limited to 'keyboards/handwired/splittest/readme.md')
| -rw-r--r-- | keyboards/handwired/splittest/readme.md | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/keyboards/handwired/splittest/readme.md b/keyboards/handwired/splittest/readme.md new file mode 100644 index 000000000..3dbff32ed --- /dev/null +++ b/keyboards/handwired/splittest/readme.md @@ -0,0 +1,26 @@ +Split Tester +============ + +A two-switch tester built using two Pro Micros, mainly intended to test RGB on split keyboards. Seen here: https://www.instagram.com/p/BvCPNzynwrV/ + +Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges) +Hardware Supported: Pro Micro + +Make example for this keyboard (after setting up your build environment): + + make handwired/splittest:default + +Example of flashing this keyboard: + + make handwired/splittest:default:avrdude + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +Wiring +------ +- Add switches to both Pro Micros across B3 and B6 pins +- Add pull-up resistor to left side between VCC and F6 +- Add pull-down resistors to right side between GND and F6 +- Connect the following pins on both sides together: D0, D1, GND, VCC +- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC +- Wire Di of RGB strip for each half to D2 |