1 files changed, 75 insertions, 0 deletions
diff --git a/keyboards/handwired/trackpoint/config.h b/keyboards/handwired/trackpoint/config.h
new file mode 100644
index 000000000..7558c03bf
--- /dev/null
+++ b/keyboards/handwired/trackpoint/config.h
@@ -0,0 +1,75 @@
+#ifndef CONFIG_H
+    #define CONFIG_H
+
+    #include "config_common.h"
+
+    #define VENDOR_ID       0x1234
+    #define PRODUCT_ID      0x5678
+    #define DEVICE_VER      0x0001
+    #define MANUFACTURER    QMK
+    #define PRODUCT         TRACKPOINT-DEMO
+    #define DESCRIPTION     Simple demonstration for IBM Trackpoint integration
+
+    #define MATRIX_ROWS 1
+    #define MATRIX_COLS 3
+
+    #ifdef PS2_USE_USART
+        #define PS2_CLOCK_PORT  PORTD
+        #define PS2_CLOCK_PIN   PIND
+        #define PS2_CLOCK_DDR   DDRD
+        #define PS2_CLOCK_BIT   5
+        #define PS2_DATA_PORT   PORTD
+        #define PS2_DATA_PIN    PIND
+        #define PS2_DATA_DDR    DDRD
+        #define PS2_DATA_BIT    2
+
+        /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+        /* set DDR of CLOCK as input to be slave */
+        #define PS2_USART_INIT() do {   \
+            PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
+            PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
+            UCSR1C = ((1 << UMSEL10) |  \
+                      (3 << UPM10)   |  \
+                      (0 << USBS1)   |  \
+                      (3 << UCSZ10)  |  \
+                      (0 << UCPOL1));   \
+            UCSR1A = 0;                 \
+            UBRR1H = 0;                 \
+            UBRR1L = 0;                 \
+        } while (0)
+        #define PS2_USART_RX_INT_ON() do {  \
+            UCSR1B = ((1 << RXCIE1) |       \
+                      (1 << RXEN1));        \
+        } while (0)
+        #define PS2_USART_RX_POLL_ON() do { \
+            UCSR1B = (1 << RXEN1);          \
+        } while (0)
+        #define PS2_USART_OFF() do {    \
+            UCSR1C = 0;                 \
+            UCSR1B &= ~((1 << RXEN1) |  \
+                        (1 << TXEN1));  \
+        } while (0)
+        #define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
+        #define PS2_USART_RX_DATA       UDR1
+        #define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+        #define PS2_USART_RX_VECT       USART1_RX_vect
+    #endif
+
+    #define MATRIX_COL_PINS { F1, F4, F5 }
+    #define MATRIX_ROW_PINS { F0 }
+    #define UNUSED_PINS
+
+    /* COL2ROW or ROW2COL */
+    #define DIODE_DIRECTION COL2ROW
+
+    #define DEBOUNCING_DELAY 5
+
+    #define LOCKING_SUPPORT_ENABLE
+    #define LOCKING_RESYNC_ENABLE
+
+    /* key combination for command */
+    #define IS_COMMAND() ( \
+        keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    )
+
+#endif