diff options
Diffstat (limited to 'keyboards/helix')
58 files changed, 2107 insertions, 411 deletions
diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h index b49f0173b..b8822e227 100644 --- a/keyboards/helix/pico/config.h +++ b/keyboards/helix/pico/config.h @@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DESCRIPTION A split keyboard for the cheap makers -#define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 @@ -84,10 +83,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER + //#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD // Helix keyboard RGB LED support //#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no diff --git a/keyboards/helix/pico/keymaps/biacco/config.h b/keyboards/helix/pico/keymaps/biacco/config.h index 776eecfb6..765318519 100644 --- a/keyboards/helix/pico/keymaps/biacco/config.h +++ b/keyboards/helix/pico/keymaps/biacco/config.h @@ -27,3 +27,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_CLICKY #endif +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/helix/pico/keymaps/biacco/rules.mk b/keyboards/helix/pico/keymaps/biacco/rules.mk index 0a720002d..d6b36580e 100644 --- a/keyboards/helix/pico/keymaps/biacco/rules.mk +++ b/keyboards/helix/pico/keymaps/biacco/rules.mk @@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output on port B5 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -92,7 +92,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) diff --git a/keyboards/helix/pico/keymaps/default/config.h b/keyboards/helix/pico/keymaps/default/config.h index 6084b0970..20dfc9f98 100644 --- a/keyboards/helix/pico/keymaps/default/config.h +++ b/keyboards/helix/pico/keymaps/default/config.h @@ -28,4 +28,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define AUDIO_CLICKY #endif +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + #endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/pico/keymaps/default/keymap.c b/keyboards/helix/pico/keymaps/default/keymap.c index 75221d485..5273bb4a0 100644 --- a/keyboards/helix/pico/keymaps/default/keymap.c +++ b/keyboards/helix/pico/keymaps/default/keymap.c @@ -164,7 +164,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, AU_ON, AU_OFF, MU_TOG, MU_MOD, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ _______, CK_TOGG, CK_RST, CK_UP, CK_DOWN, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ ) }; @@ -238,7 +238,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else { TOG_STATUS = !TOG_STATUS; #ifdef RGBLIGHT_ENABLE - //rgblight_mode(16); + //rgblight_mode(RGBLIGHT_MODE_SNAKE + 1); #endif } layer_on(_LOWER); @@ -261,7 +261,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else { TOG_STATUS = !TOG_STATUS; #ifdef RGBLIGHT_ENABLE - //rgblight_mode(15); + //rgblight_mode(RGBLIGHT_MODE_SNAKE); #endif } layer_on(_RAISE); diff --git a/keyboards/helix/pico/keymaps/default/rules.mk b/keyboards/helix/pico/keymaps/default/rules.mk index afb124068..3b518ff88 100644 --- a/keyboards/helix/pico/keymaps/default/rules.mk +++ b/keyboards/helix/pico/keymaps/default/rules.mk @@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output on port B5 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -92,7 +92,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) @@ -119,10 +119,6 @@ endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) diff --git a/keyboards/helix/pico/keymaps/mtei/config.h b/keyboards/helix/pico/keymaps/mtei/config.h new file mode 100644 index 000000000..c5812de8d --- /dev/null +++ b/keyboards/helix/pico/keymaps/mtei/config.h @@ -0,0 +1,52 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +// place overrides here + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(STARTUP_SOUND) + #define AUDIO_CLICKY +#endif + +#undef TAPPING_TERM +#define TAPPING_TERM 300 +#define PERMISSIVE_HOLD +/* when TAPPING_TERM >= 500 same effect PERMISSIVE_HOLD. + see tmk_core/common/action_tapping.c */ + +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + //#define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + +#endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/pico/keymaps/mtei/keymap.c b/keyboards/helix/pico/keymaps/mtei/keymap.c new file mode 100644 index 000000000..27bf06243 --- /dev/null +++ b/keyboards/helix/pico/keymaps/mtei/keymap.c @@ -0,0 +1,496 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif +#ifdef CONSOLE_ENABLE + #include <print.h> +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _COLEMAK, + _DVORAK, + _EUCALYN, + _NUML, + _NUMR, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + EUCALYN, + NUML, + NUMR, + KC_xEISU, + KC_xKANA, + KC_ZERO2, + RGBRST +}; + +//Macros +#define KC_LOWER MO(_LOWER) +#define KC_NUML LT(_NUML,KC_SPC) +#define KC_NUMR LT(_NUMR,KC_SPC) +#define KC_RABS LT(_RAISE,KC_BSPC) +#define KC_RAEN LT(_RAISE,KC_ENT) +#define KC_____ _______ +#define KC_XXXX XXXXXXX +#define KC_ADJ MO(_ADJUST) +#define KC_LSMI LSFT(KC_MINS) +#define KC_LSEQ LSFT(KC_EQL) +#define KC_LSRB LSFT(KC_RBRC) +#define KC_LSLB LSFT(KC_LBRC) +#define KC_LSGR LSFT(KC_GRV) +#define KC_LSQT LSFT(KC_QUOT) +#define ___ _______ +#define KC_S0 LSFT(KC_0) +#define KC_S1 LSFT(KC_1) +#define KC_S2 LSFT(KC_2) +#define KC_S3 LSFT(KC_3) +#define KC_S4 LSFT(KC_4) +#define KC_S5 LSFT(KC_5) +#define KC_S6 LSFT(KC_6) +#define KC_S7 LSFT(KC_7) +#define KC_S8 LSFT(KC_8) +#define KC_S9 LSFT(KC_9) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | Q | W | E | R | T | | Y | U | I | O | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | Ctrl | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | + * `-------------------------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT_kc( \ + ESC, Q, W, E, R, T, Y, U, I, O, P, BSLS, \ + LCTL, A, S, D, F, G, H, J, K, L, SCLN, RCTL, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, \ + LOWER,LOWER, CAPS, LALT, LGUI,NUML, RABS, RAEN,NUMR, RGUI, RALT, APP,LOWER, LOWER \ + ), + + /* Colemak + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | Q | W | F | P | G | | J | L | U | Y | ; | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | R | S | T | D | | H | N | E | I | O | Ctrl | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | K | M | , | . | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | + * `-------------------------------------------------------------------------------------------------' + */ + [_COLEMAK] = LAYOUT_kc( \ + ESC, Q, W, F, P, G, J, L, U, Y, SCLN, BSLS, \ + LCTL, A, R, S, T, D, H, N, E, I, O, RCTL, \ + LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, RSFT, \ + LOWER,LOWER, CAPS, LALT, LGUI,NUML, RABS, RAEN,NUMR, RGUI, RALT, APP,LOWER, LOWER \ + ), + + /* Dvorak + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | ' | , | . | P | Y | | F | G | C | R | L | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | O | E | U | I | | D | H | T | N | S | Ctrl | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | + * `-------------------------------------------------------------------------------------------------' + */ + [_DVORAK] = LAYOUT_kc( \ + ESC, QUOT, COMM, DOT, P, Y, F, G, C, R, L, BSLS, \ + LCTL, A, O, E, U, I, D, H, T, N, S, RCTL, \ + LSFT, SCLN, Q, J, K, X, B, M, W, V, Z, RSFT, \ + LOWER,LOWER, CAPS, LALT, LGUI,NUML, RABS, RAEN,NUMR, RGUI, RALT, APP,LOWER, LOWER \ + ), + + /* Eucalyn (http://eucalyn.hatenadiary.jp/entry/about-eucalyn-layout) + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | Q | W | , | . | ; | | M | R | D | Y | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | O | E | I | U | | G | T | K | S | N | Ctrl | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | F | | B | H | J | L | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | + * `-------------------------------------------------------------------------------------------------' + */ + [_EUCALYN] = LAYOUT_kc( \ + ESC, Q, W, COMM, DOT, SCLN, M, R, D, Y, P, BSLS, \ + LCTL, A, O, E, I, U, G, T, K, S, N, RCTL, \ + LSFT, Z, X, C, V, F, B, H, J, L, SLSH, RSFT, \ + LOWER,LOWER, CAPS, LALT, LGUI,NUML, RABS, RAEN,NUMR, RGUI, RALT, APP,LOWER, LOWER \ + ), + + /* Num + * ,-----------------------------------------. ,-----------------------------------------. + * | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ + [_NUML] = LAYOUT_kc( \ + ____, S1, S2, S3, S4, S5, S6, S7, S8, S9, S0, ____, \ + ____, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, F12, \ + ____, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, \ + ____, ____, ____, ____, ____, ____, ____, ____, SPC, ____, ____, ____, ____, ____ \ + ), + + [_NUMR] = LAYOUT_kc( \ + ____, S1, S2, S3, S4, S5, S6, S7, S8, S9, S0, ____, \ + ____, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, F12, \ + ____, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, \ + ____, ____, ____, ____, ____, SPC, ____, ____, ____, ____, ____, ____, ____, ____ \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | | |Pause | ScrLk| Ins | | | | Ins | ScrLk|Pause | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | PgUp | | Up |Delete| Home | | Home |Delete| Up | | PgUp | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | PgDn | Left | Down | Right| End | | End | Left | Down | Right| PgDn | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | PrtSc| | | |Adjust|Adjust| | | | PrtSc| | | + * `-------------------------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT_kc( \ + XXXX, XXXX, PAUS, SLCK, INS, XXXX, XXXX, INS, SLCK, PAUS, XXXX, ____, \ + ____, HOME, XXXX, UP, DEL, PGUP, PGUP, DEL, UP, XXXX, HOME, ____, \ + ____, END, LEFT, DOWN, RGHT, PGDN, PGDN, LEFT, DOWN, RGHT, END, ____, \ + ____, ____, PSCR, ____, ____, ____, ADJ, ADJ, ____, ____, ____, PSCR, ____, ____ \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | TAB | | | | _ | - | | = | + | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | EISU | | | | { | [ | | ] | } | | | | KANA | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | ~ | ` | | ' | " | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT_kc( \ + TAB, XXXX, XXXX, XXXX, LSMI, MINS, EQL, LSEQ, XXXX, XXXX, XXXX, XXXX, \ + xEISU, XXXX, XXXX, XXXX, LSLB, LBRC, RBRC, LSRB, XXXX, XXXX, XXXX, xKANA, \ + XXXX, XXXX, XXXX, XXXX, LSGR, GRV, QUOT, LSQT, XXXX, XXXX, XXXX, XXXX, \ + ADJ, ADJ, XXXX, ____, ____, XXXX, ____, ____, XXXX, ____, ____, XXXX, ADJ, ADJ \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | Reset|RGBRST|RGB ON|Aud on| Win | | Win | |Qwerty|Euclyn|Colemk|Dvorak| + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | HUE+ | SAT+ | VAL+ |RGB md|Audoff| Mac | | Mac | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | HUE- | SAT- | VAL- | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + XXXXXXX, RESET, RGBRST, RGB_TOG, AU_ON, AG_SWAP, AG_SWAP, XXXXXXX, QWERTY, EUCALYN, COLEMAK, DVORAK, \ + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, AU_OFF, AG_NORM, AG_NORM, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ___,___, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______ \ + ) +}; + +#ifdef AUDIO_ENABLE + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +static int current_default_layer; + +uint32_t default_layer_state_set_kb(uint32_t state) { + // 1<<_QWERTY - 1 == 1 - 1 == _QWERTY (=0) + // 1<<_COLEMAK - 1 == 2 - 1 == _COLEMAK (=1) + current_default_layer = state - 1; + // 1<<_DVORAK - 2 == 4 - 2 == _DVORAK (=2) + if ( current_default_layer == 3 ) current_default_layer -= 1; + // 1<<_EUCALYN - 5 == 8 - 5 == _EUCALYN (=3) + if ( current_default_layer == 7 ) current_default_layer -= 4; + return state; +} + +void update_base_layer(int base) +{ + if( current_default_layer != base ) { + eeconfig_update_default_layer(1UL<<base); + default_layer_set(1UL<<base); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + update_base_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_colemak); + #endif + update_base_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_dvorak); + #endif + update_base_layer(_DVORAK); + } + return false; + break; + case EUCALYN: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_dvorak); + #endif + update_base_layer(_EUCALYN); + } + return false; + break; + case KC_xEISU: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG2); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KC_xKANA: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG1); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(50); // gets rid of tick +} + +void shutdown_user() +{ + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif + + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static void render_logo(struct CharacterMatrix *matrix) { + + static char logo[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + matrix_write(matrix, logo); +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_ANIMATIONS) + char buf[30]; + if(rgblight_config.enable) { + snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", + rgblight_config.mode, + rgblight_config.hue/RGBLIGHT_HUE_STEP, + rgblight_config.sat/RGBLIGHT_SAT_STEP, + rgblight_config.val/RGBLIGHT_VAL_STEP); + matrix_write(matrix, buf); + } +#endif + //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); +} + +static const char Qwerty_name[] PROGMEM = " Qwerty"; +static const char Colemak_name[] PROGMEM = " Colemak"; +static const char Dvorak_name[] PROGMEM = " Dvorak"; +static const char Eucalyn_name[] PROGMEM = " Eucalyn"; + +static const char NumL_name[] PROGMEM = ":NumL"; +static const char NumR_name[] PROGMEM = ":NumR"; +static const char Lower_name[] PROGMEM = ":Func"; +static const char Raise_name[] PROGMEM = ":Extra"; +static const char Adjust_name[] PROGMEM = ":Adjust"; + +static const char *layer_names[] = { + [_QWERTY] = Qwerty_name, + [_COLEMAK] = Colemak_name, + [_DVORAK] = Dvorak_name, + [_EUCALYN] = Eucalyn_name, + + [_NUML] = NumL_name, + [_NUMR] = NumR_name, + [_LOWER] = Lower_name, + [_RAISE] = Raise_name, + [_ADJUST] = Adjust_name +}; + +void render_status(struct CharacterMatrix *matrix) { + + // Render to mode icon + static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if(keymap_config.swap_lalt_lgui==false){ + matrix_write(matrix, logo[0][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[0][1]); + }else{ + matrix_write(matrix, logo[1][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[1][1]); + } + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + int name_num; + uint32_t lstate; + matrix_write_P(matrix, layer_names[current_default_layer]); + matrix_write_P(matrix, PSTR("\n")); + for( lstate = layer_state, name_num = 0; + lstate && name_num < sizeof(layer_names)/sizeof(char *); + lstate >>=1, name_num++ ) { + if( (lstate & 1) != 0 ) { + if( layer_names[name_num] ) { + matrix_write_P(matrix, layer_names[name_num]); + } + } + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(matrix, led); +} + + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + matrix_clear(&matrix); + if(is_master){ + render_status(&matrix); + }else{ + render_logo(&matrix); + } + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/helix/pico/keymaps/mtei/rules.mk b/keyboards/helix/pico/keymaps/mtei/rules.mk new file mode 100644 index 000000000..3b518ff88 --- /dev/null +++ b/keyboards/helix/pico/keymaps/mtei/rules.mk @@ -0,0 +1,125 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port B5 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +define HELIX_CUSTOMISE_MSG + $(info Helix customize) + $(info - OLED_ENABLE=$(OLED_ENABLE)) + $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) + $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_ANIMATION=$(LED_ANIMATIONS)) + $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) +endef + +# Helix keyboard customize +# you can edit follows 6 Variables +# jp: 以下の6つの変数を必要に応じて編集します。 +OLED_ENABLE = no # OLED_ENABLE +LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) +LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +Link_Time_Optimization = no # if firmware size over limit, try this option + +#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. +#### Do not enable these with audio at the same time. + +### Helix keyboard 'default' keymap: convenient command line option +## make HELIX=<options> helix:defualt +## option= oled | back | under | na | ios +## ex. +## make HELIX=oled helix:defualt +## make HELIX=oled,back helix:defualt +## make HELIX=oled,under helix:defualt +## make HELIX=oled,back,na helix:defualt +## make HELIX=oled,back,ios helix:defualt +## +ifneq ($(strip $(HELIX)),) + ifeq ($(findstring oled,$(HELIX)), oled) + OLED_ENABLE = yes + endif + ifeq ($(findstring back,$(HELIX)), back) + LED_BACK_ENABLE = yes + else ifeq ($(findstring under,$(HELIX)), under) + LED_UNDERGLOW_ENABLE = yes + endif + ifeq ($(findstring na,$(HELIX)), na) + LED_ANIMATIONS = no + endif + ifeq ($(findstring ios,$(HELIX)), ios) + IOS_DEVICE_ENABLE = yes + endif + $(eval $(call HELIX_CUSTOMISE_MSG)) + $(info ) +endif + +# Uncomment these for checking +# jp: コンパイル時にカスタマイズの状態を表示したい時はコメントをはずします。 +# $(eval $(call HELIX_CUSTOMISE_MSG)) +# $(info ) + +ifeq ($(strip $(LED_BACK_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BACK + ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + $(eval $(call HELIX_CUSTOMISE_MSG)) + $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + endif +else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +ifeq ($(strip $(AUDIO_ENABLE)),yes) + ifeq ($(strip $(RGBLIGHT_ENABLE)),yes) + Link_Time_Optimization = yes + endif + ifeq ($(strip $(OLED_ENABLE)),yes) + Link_Time_Optimization = yes + endif +endif + +ifeq ($(strip $(Link_Time_Optimization)),yes) + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# Uncomment these for debugging +# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) +# $(info -- OPT_DEFS=$(OPT_DEFS)) +# $(info ) diff --git a/keyboards/helix/pico/pico.c b/keyboards/helix/pico/pico.c index 5e248ccff..bb8ba9ca2 100644 --- a/keyboards/helix/pico/pico.c +++ b/keyboards/helix/pico/pico.c @@ -2,6 +2,12 @@ #ifdef SSD1306OLED +#include "ssd1306.h" + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +} + void led_set_kb(uint8_t usb_led) { // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here //led_set_user(usb_led); diff --git a/keyboards/helix/pico/pico.h b/keyboards/helix/pico/pico.h index a3d658daa..153132775 100644 --- a/keyboards/helix/pico/pico.h +++ b/keyboards/helix/pico/pico.h @@ -62,4 +62,18 @@ } #endif +#define LAYOUT_kc( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \ + ) \ + LAYOUT( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + + #endif diff --git a/keyboards/helix/pico/rules.mk b/keyboards/helix/pico/rules.mk index c994ac8de..75bf0a5ef 100644 --- a/keyboards/helix/pico/rules.mk +++ b/keyboards/helix/pico/rules.mk @@ -1,3 +1,2 @@ -SRC += pico/matrix.c \ - pico/split_util.c \ - ws2812.c +SRC += pico/matrix.c +SRC += pico/split_util.c diff --git a/keyboards/helix/pico/serial_config.h b/keyboards/helix/pico/serial_config.h index 82c6e4e83..fc8736d47 100644 --- a/keyboards/helix/pico/serial_config.h +++ b/keyboards/helix/pico/serial_config.h @@ -1,16 +1,9 @@ -#ifndef SOFT_SERIAL_CONFIG_H -#define SOFT_SERIAL_CONFIG_H +//// #error rev2 serial config +#ifndef SOFT_SERIAL_PIN /* Soft Serial defines */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect +#define SOFT_SERIAL_PIN D2 #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -//// #error rev2 serial config - -#endif /* SOFT_SERIAL_CONFIG_H */ +#endif diff --git a/keyboards/helix/readme.md b/keyboards/helix/readme.md index 5ee233e81..a535df052 100644 --- a/keyboards/helix/readme.md +++ b/keyboards/helix/readme.md @@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment): make helix:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/helix/rev1/config.h b/keyboards/helix/rev1/config.h index 7fec62fc8..07b5c4f6f 100644 --- a/keyboards/helix/rev1/config.h +++ b/keyboards/helix/rev1/config.h @@ -74,11 +74,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD +#define RGBLED_NUM 12 // Number of LEDs /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/helix/rev1/keymaps/OLED_sample/config.h b/keyboards/helix/rev1/keymaps/OLED_sample/config.h index 0e1b787a5..5e8989d96 100644 --- a/keyboards/helix/rev1/keymaps/OLED_sample/config.h +++ b/keyboards/helix/rev1/keymaps/OLED_sample/config.h @@ -35,7 +35,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SSD1306OLED -#define PREVENT_STUCK_MODIFIERS +#define USE_SERIAL_PD2 + #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 diff --git a/keyboards/helix/rev1/keymaps/OLED_sample/keymap.c b/keyboards/helix/rev1/keymaps/OLED_sample/keymap.c index fa51501e6..9b81979ff 100644 --- a/keyboards/helix/rev1/keymaps/OLED_sample/keymap.c +++ b/keyboards/helix/rev1/keymaps/OLED_sample/keymap.c @@ -368,7 +368,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false } else { TOG_STATUS = !TOG_STATUS; - rgblight_mode(16); + rgblight_mode(RGBLIGHT_MODE_SNAKE + 1); } layer_on(_LOWER); update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); @@ -387,7 +387,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false } else { TOG_STATUS = !TOG_STATUS; - rgblight_mode(15); + rgblight_mode(RGBLIGHT_MODE_SNAKE); } layer_on(_RAISE); update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); diff --git a/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk b/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk index 3f8fd5dc6..1347d3a7d 100644 --- a/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk +++ b/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk @@ -1,4 +1,3 @@ - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -14,12 +13,8 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/helix/rev1/keymaps/OLED_sample/serial_config.h b/keyboards/helix/rev1/keymaps/OLED_sample/serial_config.h index b991b874b..f56951e70 100644 --- a/keyboards/helix/rev1/keymaps/OLED_sample/serial_config.h +++ b/keyboards/helix/rev1/keymaps/OLED_sample/serial_config.h @@ -1,16 +1,9 @@ -#ifndef SOFT_SERIAL_CONFIG_H -#define SOFT_SERIAL_CONFIG_H +//// #error rev1/keymaps/OLED_sample serial config +#ifndef SOFT_SERIAL_PIN /* Soft Serial defines */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect +#define SOFT_SERIAL_PIN D2 #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 #define SERIAL_MASTER_BUFFER_LENGTH 0 - -//// #error rev1/keymaps/OLED_sample serial config - -#endif /* SOFT_SERIAL_CONFIG_H */ +#endif diff --git a/keyboards/helix/rev1/keymaps/default/rules.mk b/keyboards/helix/rev1/keymaps/default/rules.mk index 457a3d01d..e69de29bb 100644 --- a/keyboards/helix/rev1/keymaps/default/rules.mk +++ b/keyboards/helix/rev1/keymaps/default/rules.mk @@ -1,3 +0,0 @@ -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/helix/rev1/rev1.c b/keyboards/helix/rev1/rev1.c index d7ea9b723..309cca010 100644 --- a/keyboards/helix/rev1/rev1.c +++ b/keyboards/helix/rev1/rev1.c @@ -2,6 +2,12 @@ #ifdef SSD1306OLED +#include "ssd1306.h" + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +} + void led_set_kb(uint8_t usb_led) { // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here led_set_user(usb_led); diff --git a/keyboards/helix/rev1/serial_config.h b/keyboards/helix/rev1/serial_config.h index 51c6aa375..32218f9bb 100644 --- a/keyboards/helix/rev1/serial_config.h +++ b/keyboards/helix/rev1/serial_config.h @@ -1,16 +1,9 @@ -#ifndef SOFT_SERIAL_CONFIG_H -#define SOFT_SERIAL_CONFIG_H +/// #error rev1 serial config +#ifndef SOFT_SERIAL_PIN /* Soft Serial defines */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect +#define SOFT_SERIAL_PIN D0 #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 #define SERIAL_MASTER_BUFFER_LENGTH 0 - -/// #error rev1 serial config - -#endif /* SOFT_SERIAL_CONFIG_H */ +#endif diff --git a/keyboards/helix/rev2/config.h b/keyboards/helix/rev2/config.h index 058236122..f7d35b371 100644 --- a/keyboards/helix/rev2/config.h +++ b/keyboards/helix/rev2/config.h @@ -28,7 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DESCRIPTION A split keyboard for the cheap makers -#define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 @@ -88,10 +87,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER + //#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD // Helix keyboard RGB LED support //#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no diff --git a/keyboards/helix/rev2/keymaps/default/config.h b/keyboards/helix/rev2/keymaps/default/config.h index 185e67838..ed3767579 100644 --- a/keyboards/helix/rev2/keymaps/default/config.h +++ b/keyboards/helix/rev2/keymaps/default/config.h @@ -21,9 +21,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef CONFIG_USER_H #define CONFIG_USER_H -// if you need more program area, try uncomment follow line -//#include "serial_config_simpleapi.h" - // place overrides here +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + #endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/rev2/keymaps/default/keymap.c b/keyboards/helix/rev2/keymaps/default/keymap.c index dca9be9a4..0fb821aff 100644 --- a/keyboards/helix/rev2/keymaps/default/keymap.c +++ b/keyboards/helix/rev2/keymaps/default/keymap.c @@ -183,7 +183,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RESET, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ ) }; @@ -296,7 +296,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ ) }; @@ -373,7 +373,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else { TOG_STATUS = !TOG_STATUS; #ifdef RGBLIGHT_ENABLE - //rgblight_mode(16); + //rgblight_mode(RGBLIGHT_MODE_SNAKE + 1); #endif } layer_on(_LOWER); @@ -396,7 +396,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else { TOG_STATUS = !TOG_STATUS; #ifdef RGBLIGHT_ENABLE - //rgblight_mode(15); + //rgblight_mode(RGBLIGHT_MODE_SNAKE); #endif } layer_on(_RAISE); @@ -512,7 +512,7 @@ void music_scale_user(void) // hook point for 'led_test' keymap // 'default' keymap's led_test_init() is empty function, do nothing -// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); +// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(RGBLIGHT_MODE_RGB_TEST); __attribute__ ((weak)) void led_test_init(void) {} diff --git a/keyboards/helix/rev2/keymaps/default/rules.mk b/keyboards/helix/rev2/keymaps/default/rules.mk index 5340a74ba..37ef8632d 100644 --- a/keyboards/helix/rev2/keymaps/default/rules.mk +++ b/keyboards/helix/rev2/keymaps/default/rules.mk @@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) @@ -118,10 +118,6 @@ endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) diff --git a/keyboards/helix/rev2/keymaps/edvorakjp/config.h b/keyboards/helix/rev2/keymaps/edvorakjp/config.h index ead31605b..769988cdb 100644 --- a/keyboards/helix/rev2/keymaps/edvorakjp/config.h +++ b/keyboards/helix/rev2/keymaps/edvorakjp/config.h @@ -1,11 +1,24 @@ #ifndef CONFIG_USER_H #define CONFIG_USER_H -// if you need more program area, try uncomment follow line -//#include "serial_config_simpleapi.h" - #undef TAPPING_FORCE_HOLD #undef TAPPING_TERM #define TAPPING_TERM 120 +#define SWAP_SCLN + +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif #endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/rev2/keymaps/edvorakjp/keymap.c b/keyboards/helix/rev2/keymaps/edvorakjp/keymap.c index 650a39115..fd324a859 100644 --- a/keyboards/helix/rev2/keymaps/edvorakjp/keymap.c +++ b/keyboards/helix/rev2/keymaps/edvorakjp/keymap.c @@ -11,7 +11,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { switch(keycode) { case KC_LOCK: if (record->event.pressed) { - if (edvorakjp_config.enable_kc_lang) { + if (get_enable_kc_lang()) { SEND_STRING( SS_LCTRL(SS_LSFT(SS_TAP(X_POWER))) ); } else { SEND_STRING( SS_LGUI("l") ); @@ -35,7 +35,7 @@ void matrix_scan_user(void) { #ifdef RGBLIGHT_ENABLE uint32_t layer_state_set_keymap(uint32_t state) { - rgblight_mode_noeeprom(1); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); switch (biton32(state)) { case _EDVORAKJ1: case _EDVORAKJ2: @@ -52,7 +52,7 @@ uint32_t layer_state_set_keymap(uint32_t state) { rgblight_sethsv_noeeprom_green(); break; default: // for any other layers, or the default layer - rgblight_mode_noeeprom(28); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_GRADIENT + 3); rgblight_sethsv_noeeprom_red(); break; } diff --git a/keyboards/helix/rev2/keymaps/edvorakjp/keymap_4rows.c b/keyboards/helix/rev2/keymaps/edvorakjp/keymap_4rows.c index d8257d81f..805e6b17b 100644 --- a/keyboards/helix/rev2/keymaps/edvorakjp/keymap_4rows.c +++ b/keyboards/helix/rev2/keymaps/edvorakjp/keymap_4rows.c @@ -5,7 +5,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_EDVORAK] = LAYOUT_kc( //,----+----+----+----+----+----. ,----+----+----+----+----+----. - LBRC,RBRC,COMM,DOT , P , Y , F , G , R , W , Q ,BSLS, + LBRC,RBRC,COMM,DOT , Y , P , F , G , R , W , Q ,BSLS, //|----+----+----+----+----+----| |----+----+----+----+----+----| EQL , A , O , E , I , U , D , T , N , S , M ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| diff --git a/keyboards/helix/rev2/keymaps/edvorakjp/keymap_5rows.c b/keyboards/helix/rev2/keymaps/edvorakjp/keymap_5rows.c index 9116b3966..ef1b9d358 100644 --- a/keyboards/helix/rev2/keymaps/edvorakjp/keymap_5rows.c +++ b/keyboards/helix/rev2/keymaps/edvorakjp/keymap_5rows.c @@ -7,7 +7,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,----+----+----+----+----+----. ,----+----+----+----+----+----. GRV ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,BSPC, //|----+----+----+----+----+----| |----+----+----+----+----+----| - LBRC,RBRC,COMM,DOT , P , Y , F , G , R , W , Q ,BSLS, + LBRC,RBRC,COMM,DOT , Y , P , F , G , R , W , Q ,BSLS, //|----+----+----+----+----+----| |----+----+----+----+----+----| EQL , A , O , E , I , U , D , T , N , S , M ,MINS, //|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----| diff --git a/keyboards/helix/rev2/keymaps/edvorakjp/oled.c b/keyboards/helix/rev2/keymaps/edvorakjp/oled.c index 5ced1d4fa..227e2c56f 100644 --- a/keyboards/helix/rev2/keymaps/edvorakjp/oled.c +++ b/keyboards/helix/rev2/keymaps/edvorakjp/oled.c @@ -23,15 +23,10 @@ void render_status(struct CharacterMatrix *matrix) { // Render to mode icon static char logo[][2][3] = {{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if (edvorakjp_config.enable_kc_lang) { - matrix_write(matrix, logo[0][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[0][1]); - } else { - matrix_write(matrix, logo[1][0]); - matrix_write_P(matrix, PSTR("\n")); - matrix_write(matrix, logo[1][1]); - } + int mode_number = get_enable_kc_lang() ? 0 : 1; + matrix_write(matrix, logo[mode_number][0]); + matrix_write(matrix, "\n"); + matrix_write(matrix, logo[mode_number][1]); // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below char buf[40]; @@ -63,7 +58,7 @@ void render_status(struct CharacterMatrix *matrix) { // Host Keyboard LED Status char led[40]; snprintf(led, sizeof(led), "\n%s %s %s %s", - edvorakjp_config.enable_jp_extra_layer && japanese_mode ? "EXT" : " ", + get_enable_jp_extra_layer() && get_japanese_mode() ? "EXT" : " ", (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NMLK" : " ", (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); diff --git a/keyboards/helix/rev2/keymaps/edvorakjp/rules.mk b/keyboards/helix/rev2/keymaps/edvorakjp/rules.mk index 67da9c370..9d3743995 100644 --- a/keyboards/helix/rev2/keymaps/edvorakjp/rules.mk +++ b/keyboards/helix/rev2/keymaps/edvorakjp/rules.mk @@ -13,7 +13,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -102,7 +102,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) @@ -121,10 +121,6 @@ endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) diff --git a/keyboards/helix/rev2/keymaps/five_rows/README.md b/keyboards/helix/rev2/keymaps/five_rows/README.md index 4feaac2ef..10a4fa942 100644 --- a/keyboards/helix/rev2/keymaps/five_rows/README.md +++ b/keyboards/helix/rev2/keymaps/five_rows/README.md @@ -46,7 +46,7 @@ Mac mode swap Alt/Win(GUI) key. | ---- | ---- | --- | |on/off|Adjust + e(Qwerty)|RGB_TOG| | |Adjust + i(Qwerty)| | -|change mode|Adjust + d(Qwerty) |RGB_SMOD| +|change mode|Adjust + d(Qwerty) |RGB_MOD| | |Adjust + k(Qwerty)| | |HUE +|Adjust + Left Control|RGB_HUI| | |Adjust + Right Control| | diff --git a/keyboards/helix/rev2/keymaps/five_rows/README_jp.md b/keyboards/helix/rev2/keymaps/five_rows/README_jp.md index 932e200a5..317ffdd71 100644 --- a/keyboards/helix/rev2/keymaps/five_rows/README_jp.md +++ b/keyboards/helix/rev2/keymaps/five_rows/README_jp.md @@ -68,7 +68,7 @@ Winモードでは、該当のキーはどちらも共に Alt + `(日本語IME | ---- | ---- | --- | |オン/オフ|Adjust + e(Qwerty)|RGB_TOG| | |Adjust + i(Qwerty)| | -|モード切り替え|Adjust + d(Qwerty) |RGB_SMOD| +|モード切り替え|Adjust + d(Qwerty) |RGB_MOD| | |Adjust + k(Qwerty)| | |色相 +|Adjust + Left Control|RGB_HUI| | |Adjust + Right Control| | diff --git a/keyboards/helix/rev2/keymaps/five_rows/config.h b/keyboards/helix/rev2/keymaps/five_rows/config.h index 837219460..538859bc3 100644 --- a/keyboards/helix/rev2/keymaps/five_rows/config.h +++ b/keyboards/helix/rev2/keymaps/five_rows/config.h @@ -21,12 +21,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef CONFIG_USER_H #define CONFIG_USER_H -// if you need more program area, try uncomment follow line -//#include "serial_config_simpleapi.h" - #undef TAPPING_TERM -#define TAPPING_TERM 140 +#define TAPPING_TERM 300 +#define PERMISSIVE_HOLD +/* when TAPPING_TERM >= 500 same effect PERMISSIVE_HOLD. + see tmk_core/common/action_tapping.c */ // place overrides here +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + //#define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + #endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/rev2/keymaps/five_rows/keymap.c b/keyboards/helix/rev2/keymaps/five_rows/keymap.c index 548caf822..7b7d573d6 100644 --- a/keyboards/helix/rev2/keymaps/five_rows/keymap.c +++ b/keyboards/helix/rev2/keymaps/five_rows/keymap.c @@ -10,6 +10,9 @@ #ifdef SSD1306OLED #include "ssd1306.h" #endif +#ifdef CONSOLE_ENABLE + #include <print.h> +#endif extern keymap_config_t keymap_config; @@ -28,6 +31,7 @@ enum layer_number { _QWERTY = 0, _COLEMAK, _DVORAK, + _EUCALYN, _KEYPAD, _AUX, _KAUX, @@ -41,23 +45,27 @@ enum custom_keycodes { QWERTY = SAFE_RANGE, COLEMAK, DVORAK, + EUCALYN, KEYPAD, - EISU, - KANA, - ZERO2, + KC_xEISU, + KC_xKANA, + KC_ZERO2, RGBRST }; -enum macro_keycodes { - KC_SAMPLEMACRO, -}; - - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO //Macros -#define M_SAMPLE M(KC_SAMPLEMACRO) +#define KC_LOWER MO(_LOWER) +#define KC_RABS LT(_RAISE,KC_BSPC) +#define KC_RAEN LT(_RAISE,KC_ENT) +#define KC_FF12 LT(_PADFUNC,KC_F12) +#define KC_____ _______ +#define KC_XXXX XXXXXXX +#define KC_ADJ MO(_ADJUST) +#define KC_LSMI LSFT(KC_MINS) +#define KC_LSEQ LSFT(KC_EQL) +#define KC_LSRB LSFT(KC_RBRC) +#define KC_LSLB LSFT(KC_LBRC) +#define ___ _______ #if HELIX_ROWS == 5 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -72,16 +80,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| * | Shift| Z | X | C | V | B | ` | ' | N | M | , | . | / | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |Lower | Lower| Caps | GUI | Alt | Space| BS | Enter| Space| Alt | GUI | Menu |Lower |Lower | + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | * `-------------------------------------------------------------------------------------------------' */ - [_QWERTY] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_RCTL, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_QUOT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - MO(_LOWER),MO(_LOWER), KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, LT(_RAISE,KC_BSPC), \ - LT(_RAISE,KC_ENT), KC_SPC, KC_RGUI, KC_RALT, KC_APP,MO(_LOWER),MO(_LOWER) \ + [_QWERTY] = LAYOUT_kc( \ + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, BSLS, \ + LCTL, A, S, D, F, G, H, J, K, L, SCLN, RCTL, \ + LSFT, Z, X, C, V, B, GRV, QUOT, N, M, COMM, DOT, SLSH, RSFT, \ + LOWER, LOWER, CAPS, LALT, LGUI, SPC, RABS, RAEN, SPC, RGUI, RALT, APP,LOWER, LOWER \ ), /* Colemak @@ -94,16 +101,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| * | Shift| Z | X | C | V | B | ` | ' | K | M | , | . | / | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |Lower | Lower| Caps | GUI | Alt | Space| BS | Enter| Space| Alt | GUI | Menu |Lower |Lower | + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | * `-------------------------------------------------------------------------------------------------' */ - [_COLEMAK] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, \ - KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_RCTL, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_QUOT, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - MO(_LOWER),MO(_LOWER), KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, LT(_RAISE,KC_BSPC), \ - LT(_RAISE,KC_ENT), KC_SPC, KC_RGUI, KC_RALT, KC_APP,MO(_LOWER),MO(_LOWER) \ + [_COLEMAK] = LAYOUT_kc( \ + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, \ + TAB, Q, W, F, P, G, J, L, U, Y, SCLN, BSLS, \ + LCTL, A, R, S, T, D, H, N, E, I, O, RCTL, \ + LSFT, Z, X, C, V, B, GRV, QUOT, K, M, COMM, DOT, SLSH, RSFT, \ + LOWER, LOWER, CAPS, LALT, LGUI, SPC, RABS, RAEN, SPC, RGUI, RALT, APP,LOWER, LOWER \ ), /* Dvorak @@ -116,16 +122,36 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| * | Shift| ; | Q | J | K | X | ` | / | B | M | W | V | Z | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * |Lower | Lower| Caps | GUI | Alt | Space| BS | Enter| Space| Alt | GUI | Menu |Lower |Lower | + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | * `-------------------------------------------------------------------------------------------------' */ - [_DVORAK] = LAYOUT( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, \ - KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_RCTL, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_GRV, KC_SLSH, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ - MO(_LOWER),MO(_LOWER), KC_CAPS, KC_LALT, KC_LGUI, KC_SPC, LT(_RAISE,KC_BSPC), \ - LT(_RAISE,KC_ENT), KC_SPC, KC_RGUI, KC_RALT, KC_APP,MO(_LOWER),MO(_LOWER) \ + [_DVORAK] = LAYOUT_kc( \ + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, \ + TAB, QUOT, COMM, DOT, P, Y, F, G, C, R, L, BSLS, \ + LCTL, A, O, E, U, I, D, H, T, N, S, RCTL, \ + LSFT, SCLN, Q, J, K, X, GRV, SLSH, B, M, W, V, Z, RSFT, \ + LOWER, LOWER, CAPS, LALT, LGUI, SPC, RABS, RAEN, SPC, RGUI, RALT, APP,LOWER, LOWER \ + ), + + /* Eucalyn (http://eucalyn.hatenadiary.jp/entry/about-eucalyn-layout) + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | , | . | ; | | M | R | D | Y | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | O | E | I | U | | G | T | K | S | N | Ctrl | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | F | ` | ' | B | H | J | L | / | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Lower | Lower| Caps | Alt | GUI | Space| BS | Enter| Space| GUI | Alt | Menu |Lower |Lower | + * `-------------------------------------------------------------------------------------------------' + */ + [_EUCALYN] = LAYOUT_kc( \ + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, \ + TAB, Q, W, COMM, DOT, SCLN, M, R, D, Y, P, BSLS, \ + LCTL, A, O, E, I, U, G, T, K, S, N, RCTL, \ + LSFT, Z, X, C, V, F, GRV, QUOT, B, H, J, L, SLSH, RSFT, \ + LOWER, LOWER, CAPS, LALT, LGUI, SPC, RABS, RAEN, SPC, RGUI, RALT, APP,LOWER, LOWER \ ), /* Keypad @@ -141,13 +167,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | 0 | , | . | Enter| F5 | F10 | F12 | F12 | F5 | F10 | Enter| 0 | , | . | * `-------------------------------------------------------------------------------------------------' */ - [_KEYPAD] = LAYOUT( \ - KC_TAB, KC_PSLS, KC_PAST, KC_DEL, KC_F1, KC_F6, KC_F1, KC_F6, KC_DEL, KC_TAB, KC_PSLS, KC_PAST, \ - KC_KP_7, KC_KP_8, KC_KP_9, KC_BSPC, KC_F2, KC_F7, KC_F2, KC_F7, KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9, \ - KC_KP_4, KC_KP_5, KC_KP_6, KC_PMNS, KC_F3, KC_F8, KC_F3, KC_F8, KC_PMNS, KC_KP_4, KC_KP_5, KC_KP_6, \ - KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, KC_F4, KC_F9, KC_F11, KC_F11, KC_F4, KC_F9, KC_PPLS, KC_KP_1, KC_KP_2, KC_KP_3, \ - KC_KP_0, KC_COMM, KC_PDOT, KC_PENT, KC_F5, KC_F10, LT(_PADFUNC,KC_F12), - LT(_PADFUNC,KC_F12),KC_F5, KC_F10, KC_PENT, KC_KP_0, KC_COMM, KC_PDOT \ + [_KEYPAD] = LAYOUT_kc( \ + TAB, PSLS, PAST, DEL, F1, F6, F1, F6, DEL, TAB, PSLS, PAST, \ + KP_7, KP_8, KP_9, BSPC, F2, F7, F2, F7, BSPC, KP_7, KP_8, KP_9, \ + KP_4, KP_5, KP_6, PMNS, F3, F8, F3, F8, PMNS, KP_4, KP_5, KP_6, \ + KP_1, KP_2, KP_3, PPLS, F4, F9, F11, F11, F4, F9, PPLS, KP_1, KP_2, KP_3, \ + KP_0, COMM, PDOT, PENT, F5, F10, FF12, FF12, F5, F10, PENT, KP_0, COMM, PDOT \ ), /* AUX modifier key layer @@ -163,12 +188,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | 00 | | | | | | | | | | | 00 | | * `-------------------------------------------------------------------------------------------------' */ - [_KAUX] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, ZERO2, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ZERO2, _______ \ + [_KAUX] = LAYOUT_kc( \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____,ZERO2, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ZERO2,____ \ ), /* Keypad function layer @@ -184,13 +209,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | | | * `-------------------------------------------------------------------------------------------------' */ - [_PADFUNC] = LAYOUT( \ - XXXXXXX, XXXXXXX, XXXXXXX, KC_PAUS, KC_SLCK, KC_PSCR, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_UP, KC_PGUP, KC_PGUP, KC_UP, KC_HOME, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, KC_DEL, KC_INS, KC_LEFT, KC_DOWN, KC_RGHT, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_DEL, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, KC_END, XXXXXXX, KC_PGDN,MO(_ADJUST), - MO(_ADJUST), KC_PGDN, XXXXXXX, KC_END, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + [_PADFUNC] = LAYOUT_kc( \ + XXXX, XXXX, XXXX, PAUS, SLCK, PSCR, PSCR, SLCK, PAUS, XXXX, XXXX, XXXX, \ + XXXX, XXXX, XXXX, HOME, UP, PGUP, PGUP, UP, HOME, XXXX, XXXX, XXXX, \ + XXXX, DEL, INS, LEFT, DOWN, RGHT, LEFT, DOWN, RGHT, INS, DEL, XXXX, \ + XXXX, XXXX, XXXX, END, XXXX, PGDN, ADJ, ADJ, PGDN, XXXX, END, XXXX, XXXX, XXXX, \ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, ____, ____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX \ ), /* Lower @@ -206,13 +230,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | PrtSc| | | | | | | | | PrtSc| | | * `-------------------------------------------------------------------------------------------------' */ - [_LOWER] = LAYOUT( \ - XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, \ - XXXXXXX, XXXXXXX, KC_PAUS, KC_SLCK, KC_INS, XXXXXXX, XXXXXXX, KC_INS, KC_SLCK, KC_PAUS, XXXXXXX, KC_F12, \ - _______, KC_HOME, XXXXXXX, KC_UP, KC_DEL, KC_PGUP, KC_PGUP, KC_DEL, KC_UP, XXXXXXX, KC_HOME, _______, \ - _______, KC_END, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX, XXXXXXX,KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______, \ - _______, _______, KC_PSCR, _______, _______, _______, MO(_ADJUST), - MO(_ADJUST), _______, _______, _______, KC_PSCR, _______, _______ \ + [_LOWER] = LAYOUT_kc( \ + XXXX, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, \ + XXXX, XXXX, PAUS, SLCK, INS, XXXX, XXXX, INS, SLCK, PAUS, XXXX, F12, \ + ____, HOME, XXXX, UP, DEL, PGUP, PGUP, DEL, UP, XXXX, HOME, ____, \ + ____, END, LEFT, DOWN, RGHT, PGDN, XXXX, XXXX, PGDN, LEFT, DOWN, RGHT, END, ____, \ + ____, ____, PSCR, ____, ____, ____, ADJ, ADJ, ____, ____, ____, PSCR, ____, ____ \ ), /* Raise @@ -228,18 +251,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | | | * `-------------------------------------------------------------------------------------------------' */ - [_RAISE] = LAYOUT( \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LSFT(KC_MINS), KC_MINS, KC_EQL, LSFT(KC_EQL), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, LSFT(KC_LBRC), KC_LBRC, KC_RBRC, LSFT(KC_RBRC), XXXXXXX, XXXXXXX, XXXXXXX, _______, \ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, EISU, EISU, KANA, KANA, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, \ - MO(_ADJUST),MO(_ADJUST),XXXXXXX, _______, _______, XXXXXXX, _______, - _______, XXXXXXX, _______, _______, XXXXXXX,MO(_ADJUST),MO(_ADJUST) \ + [_RAISE] = LAYOUT_kc( \ + XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, \ + XXXX, XXXX, XXXX, XXXX, LSMI, MINS, EQL, LSEQ, XXXX, XXXX, XXXX, XXXX, \ + ____, XXXX, XXXX, XXXX, LSLB, LBRC, RBRC, LSRB, XXXX, XXXX, XXXX, ____, \ + ____, XXXX, XXXX, XXXX, XXXX,xEISU,xEISU, xKANA,xKANA,MNXT, VOLD, VOLU, MPLY, ____, \ + ADJ, ADJ, XXXX, ____, ____, XXXX, ____, ____, XXXX, ____, ____, XXXX, ADJ, ADJ \ ), /* Adjust (Lower + Raise) * ,-----------------------------------------. ,-----------------------------------------. - * | | |Keypad|Dvorak|Colemk|Qwerty| |Qwerty|Colemk|Dvorak|Keypad| | | + * | |Keypad|Dvorak|Colemk|Euclyn|Qwerty| |Qwerty|Euclyn|Colemk|Dvorak|Keypad| | * |------+------+------+------+------+------| |------+------+------+------+------+------| * | | Reset|RGBRST|RGB ON|Aud on| Win | | Win |Aud on|RGB ON|RGBRST| | | * |------+------+------+------+------+------| |------+------+------+------+------+------| @@ -251,11 +273,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-------------------------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT( \ - XXXXXXX, XXXXXXX, KEYPAD, DVORAK, COLEMAK, QWERTY, QWERTY, COLEMAK, DVORAK, KEYPAD, XXXXXXX, XXXXXXX, \ - XXXXXXX, RESET, RGBRST, RGB_TOG, AU_ON, AG_SWAP, AG_SWAP, AU_ON, RGB_TOG, RGBRST, XXXXXXX, XXXXXXX, \ - RGB_HUI, RGB_SAI, RGB_VAI,RGB_SMOD, AU_OFF, AG_NORM, AG_NORM, AU_OFF,RGB_SMOD, RGB_VAI, RGB_SAI, RGB_HUI, \ - RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAD, RGB_SAD, RGB_HUD, \ - _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______ \ + XXXXXXX, KEYPAD, DVORAK, COLEMAK, EUCALYN, QWERTY, QWERTY, EUCALYN, COLEMAK, DVORAK, KEYPAD, XXXXXXX, \ + XXXXXXX, RESET, RGBRST, RGB_TOG, AU_ON, AG_SWAP, AG_SWAP, AU_ON, RGB_TOG, RGBRST, XXXXXXX, XXXXXXX, \ + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, AU_OFF, AG_NORM, AG_NORM, AU_OFF, RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, \ + RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, ___,___, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAD, RGB_SAD, RGB_HUD, \ + _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ___,___, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______ \ ), /* AUX modifier key layer @@ -271,13 +293,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | BS | Enter| | | | | | | | * `-------------------------------------------------------------------------------------------------' */ - [_AUX] = LAYOUT( \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, KC_BSPC, LT(_RAISE,KC_ENT), \ - _______, _______, _______, _______, _______, _______, _______ \ + [_AUX] = LAYOUT_kc( \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \ + ____, ____, ____, ____, ____, BSPC, RAEN, ____, ____, ____, ____, ____, ____, ____ \ ) }; @@ -304,23 +325,25 @@ uint32_t default_layer_state_set_kb(uint32_t state) { current_default_layer = state - 1; // 1<<_DVORAK - 2 == 4 - 2 == _DVORAK (=2) if ( current_default_layer == 3 ) current_default_layer -= 1; - // 1<<_KEYPAD - 5 == 8 - 5 == _KEYPAD (=3) + // 1<<_EUCALYN - 5 == 8 - 5 == _EUCALYN (=3) if ( current_default_layer == 7 ) current_default_layer -= 4; + // 1<<_KEYPAD - 12 == 16 - 12 == _KEYPAD (=4) + if ( current_default_layer == 15 ) current_default_layer -= 11; return state; } void update_base_layer(int base) { if( current_default_layer != base ) { - eeconfig_update_default_layer(1UL<<base); - default_layer_set(1UL<<base); - layer_off(_AUX); - layer_off(_KAUX); + eeconfig_update_default_layer(1UL<<base); + default_layer_set(1UL<<base); + layer_off(_AUX); + layer_off(_KAUX); } else { - if( base < _KEYPAD ) - layer_invert(_AUX); - else - layer_invert(_KAUX); + if( base < _KEYPAD ) + layer_invert(_AUX); + else + layer_invert(_KAUX); } } @@ -331,7 +354,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef AUDIO_ENABLE PLAY_SONG(tone_qwerty); #endif - update_base_layer(_QWERTY); + update_base_layer(_QWERTY); } return false; break; @@ -340,7 +363,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef AUDIO_ENABLE PLAY_SONG(tone_colemak); #endif - update_base_layer(_COLEMAK); + update_base_layer(_COLEMAK); } return false; break; @@ -349,7 +372,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef AUDIO_ENABLE PLAY_SONG(tone_dvorak); #endif - update_base_layer(_DVORAK); + update_base_layer(_DVORAK); + } + return false; + break; + case EUCALYN: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_dvorak); + #endif + update_base_layer(_EUCALYN); } return false; break; @@ -358,17 +390,17 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef AUDIO_ENABLE PLAY_SONG(tone_dvorak); #endif - update_base_layer(_KEYPAD); + update_base_layer(_KEYPAD); } return false; break; - case ZERO2: + case KC_ZERO2: if (record->event.pressed) { SEND_STRING("00"); } return false; break; - case EISU: + case KC_xEISU: if (record->event.pressed) { if(keymap_config.swap_lalt_lgui==false){ register_code(KC_LANG2); @@ -380,7 +412,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KANA: + case KC_xKANA: if (record->event.pressed) { if(keymap_config.swap_lalt_lgui==false){ register_code(KC_LANG1); @@ -468,10 +500,10 @@ static void render_logo(struct CharacterMatrix *matrix) { char buf[30]; if(rgblight_config.enable) { snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_config.mode, - rgblight_config.hue/RGBLIGHT_HUE_STEP, - rgblight_config.sat/RGBLIGHT_SAT_STEP, - rgblight_config.val/RGBLIGHT_VAL_STEP); + rgblight_config.mode, + rgblight_config.hue/RGBLIGHT_HUE_STEP, + rgblight_config.sat/RGBLIGHT_SAT_STEP, + rgblight_config.val/RGBLIGHT_VAL_STEP); matrix_write(matrix, buf); } #endif @@ -481,6 +513,7 @@ static void render_logo(struct CharacterMatrix *matrix) { static const char Qwerty_name[] PROGMEM = " Qwerty"; static const char Colemak_name[] PROGMEM = " Colemak"; static const char Dvorak_name[] PROGMEM = " Dvorak"; +static const char Eucalyn_name[] PROGMEM = " Eucalyn"; static const char Keypad_name[] PROGMEM = " Keypad"; static const char AUX_name[] PROGMEM = ":AUX"; @@ -494,6 +527,7 @@ static const char *layer_names[] = { [_QWERTY] = Qwerty_name, [_COLEMAK] = Colemak_name, [_DVORAK] = Dvorak_name, + [_EUCALYN]= Eucalyn_name, [_KEYPAD] = Keypad_name, [_AUX] = AUX_name, [_KAUX] = KAUX_name, @@ -526,18 +560,18 @@ void render_status(struct CharacterMatrix *matrix) { lstate && name_num < sizeof(layer_names)/sizeof(char *); lstate >>=1, name_num++ ) { if( (lstate & 1) != 0 ) { - if( layer_names[name_num] ) { - matrix_write_P(matrix, layer_names[name_num]); - } + if( layer_names[name_num] ) { + matrix_write_P(matrix, layer_names[name_num]); + } } } // Host Keyboard LED Status char led[40]; snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", - (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", - (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); matrix_write(matrix, led); } diff --git a/keyboards/helix/rev2/keymaps/five_rows/rules.mk b/keyboards/helix/rev2/keymaps/five_rows/rules.mk index 402f855ae..a0bf21917 100644 --- a/keyboards/helix/rev2/keymaps/five_rows/rules.mk +++ b/keyboards/helix/rev2/keymaps/five_rows/rules.mk @@ -6,15 +6,19 @@ BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration +# CONSOLE_ENABLE and COMMAND_ENABLE +# yes, no +1500 +# yes, yes +3200 +# no, yes +400 NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -66,6 +70,9 @@ ifneq ($(strip $(HELIX)),) ifeq ($(findstring ios,$(HELIX)), ios) IOS_DEVICE_ENABLE = yes endif + ifeq ($(findstring console,$(HELIX)), console) + CONSOLE_ENABLE = yes + endif $(eval $(call HELIX_CUSTOMISE_MSG)) $(info ) endif @@ -100,7 +107,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) @@ -118,10 +125,6 @@ endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) diff --git a/keyboards/helix/rev2/keymaps/five_rows_jis/config.h b/keyboards/helix/rev2/keymaps/five_rows_jis/config.h index c380b7db4..97494c937 100644 --- a/keyboards/helix/rev2/keymaps/five_rows_jis/config.h +++ b/keyboards/helix/rev2/keymaps/five_rows_jis/config.h @@ -23,9 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // place overrides here -// if you need more program area, try uncomment follow line -//#include "serial_config_simpleapi.h" - #ifdef MOUSEKEY_ENABLE #undef MOUSEKEY_INTERVAL #define MOUSEKEY_INTERVAL 0 @@ -43,4 +40,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MOUSEKEY_DELAY 0 #endif +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + #endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c b/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c index 141b22275..8c2040d5b 100644 --- a/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c +++ b/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c @@ -204,7 +204,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, RESET, RGBRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, RGBRST, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, DL_BAS, DL_BASE, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, DL_BAS, DL_BASE, AG_NORM, AG_SWAP, XXXXXXX, \ XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, \ - XXXXXXX, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, \ + XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), }; @@ -214,7 +214,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #endif #ifdef SSD1306OLED -char keylog[20] = {}; +char keylog[24] = {}; const char code_to_name[60] = { ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', @@ -223,7 +223,7 @@ const char code_to_name[60] = { 'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ', ' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '}; -inline void set_keylog(uint16_t keycode, keyrecord_t *record) +static inline void set_keylog(uint16_t keycode, keyrecord_t *record) { char name = ' '; uint8_t leds = host_keyboard_leds(); @@ -246,6 +246,12 @@ inline void set_keylog(uint16_t keycode, keyrecord_t *record) } #endif +#ifdef RGBLIGHT_ENABLE +#define RGBLIGHT(mode) rgblight_mode(mode) +#else +#define RGBLIGHT(mode) +#endif + // define variables for reactive RGB int RGB_current_mode; #ifdef ADJUST_MACRO_ENABLE @@ -263,12 +269,6 @@ void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { #define ADJUST_MACRO(layer1, layer2, layer3) #endif -#ifdef RGBLIGHT_ENABLE -#define RGBLIGHT(mode) rgblight_mode(mode) -#else -#define RGBLIGHT(mode) -#endif - bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef SSD1306OLED if (record->event.pressed) { @@ -344,7 +344,7 @@ void matrix_scan_user(void) { iota_gfx_task(); // this is what updates the display continuously } -inline void matrix_update(struct CharacterMatrix *dest, +static inline void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { if (memcmp(dest->display, source->display, sizeof(dest->display))) { memcpy(dest->display, source->display, sizeof(dest->display)); @@ -367,13 +367,15 @@ const char helix_logo[]={ 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, 0}; -inline void render_logo(struct CharacterMatrix *matrix) { + +static inline void render_logo(struct CharacterMatrix *matrix) { matrix_write(matrix, helix_logo); } const char mac_win_logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; -inline void render_status(struct CharacterMatrix *matrix) { + +static inline void render_status(struct CharacterMatrix *matrix) { char buf[20]; // Render to mode icon diff --git a/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk b/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk index 5340a74ba..37ef8632d 100644 --- a/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk +++ b/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk @@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) @@ -118,10 +118,6 @@ endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) diff --git a/keyboards/helix/rev2/keymaps/froggy/config.h b/keyboards/helix/rev2/keymaps/froggy/config.h index dad248303..517368ae9 100644 --- a/keyboards/helix/rev2/keymaps/froggy/config.h +++ b/keyboards/helix/rev2/keymaps/froggy/config.h @@ -21,12 +21,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef CONFIG_USER_H #define CONFIG_USER_H -// if you need more program area, try uncomment follow line -//#include "serial_config_simpleapi.h" - #undef TAPPING_TERM #define TAPPING_TERM 200 #define ONESHOT_TAP_TOGGLE 5 /* Tapping this number of times holds the key until tapped this number of times again. */ #define ONESHOT_TIMEOUT 5000 /* Time (in ms) before the one shot key is released */ +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + #endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/rev2/keymaps/froggy/keymap.c b/keyboards/helix/rev2/keymaps/froggy/keymap.c index 81a28dfa5..efd8a2916 100644 --- a/keyboards/helix/rev2/keymaps/froggy/keymap.c +++ b/keyboards/helix/rev2/keymaps/froggy/keymap.c @@ -399,7 +399,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef RGBLIGHT_ENABLE if (record->event.pressed) { RGBAnimation = true; - rgblight_mode(6); + rgblight_mode(RGBLIGHT_MODE_RAINBOW_MOOD); RGB_current_mode = rgblight_config.mode; } #endif @@ -408,7 +408,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef RGBLIGHT_ENABLE if (record->event.pressed) { RGBAnimation = true; - rgblight_mode(10); + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 1); RGB_current_mode = rgblight_config.mode; } #endif @@ -417,7 +417,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef RGBLIGHT_ENABLE if (record->event.pressed) { RGBAnimation = true; - rgblight_mode(21); + rgblight_mode(RGBLIGHT_MODE_KNIGHT); RGB_current_mode = rgblight_config.mode; } #endif @@ -508,7 +508,7 @@ void led_ripple_effect(char r, char g, char b) { if (scan_count == -1) { rgblight_enable_noeeprom(); - rgblight_mode(0); + rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT); } else if (scan_count >= 0 && scan_count < 5) { for (unsigned char c=keybuf_begin; c!=keybuf_end; c++) { int i = c; @@ -593,19 +593,39 @@ void matrix_scan_user(void) { if(!RGBAnimation){ switch (layer_state) { case L_BASE: - led_ripple_effect(0,112,127); + #ifdef RGBLED_BACK + led_ripple_effect(0,112,127); + #else + rgblight_setrgb(0,112,127); + #endif break; case L_OPT: - led_ripple_effect(127,0,100); + #ifdef RGBLED_BACK + led_ripple_effect(127,0,100); + #else + rgblight_setrgb(127,0,100); + #endif break; case L_NUM: - led_ripple_effect(127,23,0); + #ifdef RGBLED_BACK + led_ripple_effect(127,23,0); + #else + rgblight_setrgb(127,23,0); + #endif break; case L_SYM: - led_ripple_effect(0,127,0); + #ifdef RGBLED_BACK + led_ripple_effect(0,127,0); + #else + rgblight_setrgb(0,127,0); + #endif break; case L_FUNC: - led_ripple_effect(127,0,61); + #ifdef RGBLED_BACK + led_ripple_effect(127,0,61); + #else + rgblight_setrgb(127,0,61); + #endif break; } } diff --git a/keyboards/helix/rev2/keymaps/froggy/rules.mk b/keyboards/helix/rev2/keymaps/froggy/rules.mk index aa9796413..8cd0efdd4 100644 --- a/keyboards/helix/rev2/keymaps/froggy/rules.mk +++ b/keyboards/helix/rev2/keymaps/froggy/rules.mk @@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) @@ -118,10 +118,6 @@ endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) diff --git a/keyboards/helix/rev2/keymaps/led_test/config.h b/keyboards/helix/rev2/keymaps/led_test/config.h index 043825452..e2bdf2f32 100644 --- a/keyboards/helix/rev2/keymaps/led_test/config.h +++ b/keyboards/helix/rev2/keymaps/led_test/config.h @@ -21,9 +21,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef CONFIG_USER_H #define CONFIG_USER_H -// if you need more program area, try uncomment follow line -#include "serial_config_simpleapi.h" - // place overrides here +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + //#define RGBLIGHT_EFFECT_RAINBOW_MOOD + //#define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + //#define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + //#define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST // led_test keymap need only this. + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + #endif /* CONFIG_USER_H */ diff --git a/keyboards/helix/rev2/keymaps/led_test/led_test_init.c b/keyboards/helix/rev2/keymaps/led_test/led_test_init.c index 1d9cb4ebd..85f5d1aa7 100644 --- a/keyboards/helix/rev2/keymaps/led_test/led_test_init.c +++ b/keyboards/helix/rev2/keymaps/led_test/led_test_init.c @@ -5,7 +5,7 @@ void led_test_init(void) { static int scan_count = 0; if( scan_count == 2 ) { rgblight_enable_noeeprom(); - rgblight_mode_noeeprom(35); + rgblight_mode_noeeprom(RGBLIGHT_MODE_RGB_TEST); } if( scan_count < 3 ) scan_count ++; } @@ -15,6 +15,6 @@ void led_test_init(void) { // can use this? void startup_user(void) { rgblight_enable_noeeprom(); - rgblight_mode_noeeprom(35); + rgblight_mode_noeeprom(RGBLIGHT_MODE_RGB_TEST); } #endif diff --git a/keyboards/helix/rev2/keymaps/led_test/rules.mk b/keyboards/helix/rev2/keymaps/led_test/rules.mk index c7ee75c36..2062d348d 100644 --- a/keyboards/helix/rev2/keymaps/led_test/rules.mk +++ b/keyboards/helix/rev2/keymaps/led_test/rules.mk @@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing define HELIX_CUSTOMISE_MSG @@ -100,7 +100,7 @@ ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) endif ifeq ($(strip $(LED_ANIMATIONS)), yes) - OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS endif ifeq ($(strip $(OLED_ENABLE)), yes) @@ -120,10 +120,6 @@ SRC += led_test_init.c # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -ifndef QUANTUM_DIR - include ../../../../Makefile -endif - # Uncomment these for debugging # $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) # $(info -- OPT_DEFS=$(OPT_DEFS)) diff --git a/keyboards/helix/rev2/keymaps/yshrsmz/config.h b/keyboards/helix/rev2/keymaps/yshrsmz/config.h new file mode 100644 index 000000000..d70f23c3e --- /dev/null +++ b/keyboards/helix/rev2/keymaps/yshrsmz/config.h @@ -0,0 +1,38 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +/* auto shift config */ +#define AUTO_SHIFT_TIMEOUT 150 + +// If you need more program area, try select and reduce rgblight modes to use. + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c b/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c new file mode 100644 index 000000000..1bde66e88 --- /dev/null +++ b/keyboards/helix/rev2/keymaps/yshrsmz/keymap.c @@ -0,0 +1,558 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _QWERTY = 0, + _LOWER, + _RAISE, + _FUNC, + _ADJUST +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + FUNC, + ADJUST, + EISU, + KANA +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +//Macros +#define M_SAMPLE M(KC_SAMPLEMACRO) + +#if HELIX_ROWS == 5 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | = | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ESC | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Shift | Z | X | C | V | B | Fn | Fn | N | M | , | . | / |Shift | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | EISU | Ctrl | Alt | GUI |Lower |Space | Bksp |Enter |Space |Raise | GUI | Alt | Ctrl | KANA | + * `-------------------------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, FUNC, FUNC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + EISU, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, RAISE, KC_RGUI, KC_RALT, KC_RCTL, KANA \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | F12 | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | F12 | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Func + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | LEFT | DOWN | UP |RIGHT | PGUP | | + * |------+------+------+------+------+------|------+------|------+------+------+------+------+------| + * | | | | | | | | | HOME | END |Alt+← |Alt+→ | PGDN | | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_FUNC] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, LALT(KC_LEFT), LALT(KC_RGHT), KC_PGDN, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | Reset| | | | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Aud on|Audoff| Mac | | Win |Qwerty| | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ + ) +}; + +#elif HELIX_ROWS == 4 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | = | Q | W | E | R | T | | Y | U | I | O | P | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | EISU | Ctrl | Alt | GUI |ESC/Lower | Func | Bksp |Enter |Space |Raise | GUI | Alt | Ctrl | KANA | + * `-------------------------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_EQL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + EISU, KC_LCTL, KC_LALT, KC_LGUI, LT(_LOWER, KC_ESC), FUNC, KC_BSPC, KC_ENT, KC_SPC, RAISE, KC_RGUI, KC_RALT, KC_RCTL, KANA \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | F12 | | | | | | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | F12 | | | | | | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Func + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | LEFT | DOWN | UP |RIGHT | PGUP | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | HOME | END |Alt+← |Alt+→ | PGDN | | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_FUNC] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, LALT(KC_LEFT), LALT(KC_RGHT), KC_PGDN, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | Reset| | | | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Aud on|Audoff| Mac | | Win |Qwerty| | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ + ) +}; + +#else +#error "undefined keymaps" +#endif + + +#ifdef AUDIO_ENABLE + +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); +#endif + +// define variables for reactive RGB +bool TOG_STATUS = false; +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGB_current_mode); + #endif + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGBLIGHT_MODE_SNAKE + 1); + #endif + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + #endif + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + //not sure how to have keyboard check mode and set it to a variable, so my work around + //uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGBLIGHT_MODE_SNAKE); + #endif + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + #ifdef RGBLIGHT_ENABLE + //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + #endif + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case FUNC: + if (record->event.pressed) { + layer_on(_FUNC); + } else { + layer_off(_FUNC); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + break; + case EISU: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG2); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KANA: + if (record->event.pressed) { + if(keymap_config.swap_lalt_lgui==false){ + register_code(KC_LANG1); + }else{ + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick +} + +void shutdown_user() +{ + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif + + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// hook point for 'led_test' keymap +// 'default' keymap's led_test_init() is empty function, do nothing +// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(RGBLIGHT_MODE_RGB_TEST); +__attribute__ ((weak)) +void led_test_init(void) {} + +void matrix_scan_user(void) { + led_test_init(); + iota_gfx_task(); // this is what updates the display continuously +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_FUNC (1<<_FUNC) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +static void render_logo(struct CharacterMatrix *matrix) { + + static char logo[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + matrix_write(matrix, logo); + //matrix_write_P(&matrix, PSTR(" Split keyboard kit")); +} + + + +void render_status(struct CharacterMatrix *matrix) { + + // Render to mode icon + static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if(keymap_config.swap_lalt_lgui==false){ + matrix_write(matrix, logo[0][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[0][1]); + }else{ + matrix_write(matrix, logo[1][0]); + matrix_write_P(matrix, PSTR("\n")); + matrix_write(matrix, logo[1][1]); + } + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(matrix, PSTR("\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(matrix, PSTR("Lower")); + break; + case L_FUNC: + matrix_write_P(matrix, PSTR("Func")); + break; + case L_ADJUST: + case L_ADJUST_TRI: + matrix_write_P(matrix, PSTR("Adjust")); + break; + default: + matrix_write(matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(matrix, led); +} + + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + matrix_clear(&matrix); + if(is_master){ + render_status(&matrix); + }else{ + render_logo(&matrix); + } + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/helix/rev2/keymaps/yshrsmz/rules.mk b/keyboards/helix/rev2/keymaps/yshrsmz/rules.mk new file mode 100644 index 000000000..3f390b48f --- /dev/null +++ b/keyboards/helix/rev2/keymaps/yshrsmz/rules.mk @@ -0,0 +1,121 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +define HELIX_CUSTOMISE_MSG + $(info Helix customize) + $(info - OLED_ENABLE=$(OLED_ENABLE)) + $(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE)) + $(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE)) + $(info - LED_ANIMATION=$(LED_ANIMATIONS)) + $(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE)) +endef + +# Helix keyboard customize +# you can edit follows 7 Variables +# jp: 以下の7つの変数を必要に応じて編集します。 +HELIX_ROWS = 4 # Helix Rows is 4 or 5 +OLED_ENABLE = yes # OLED_ENABLE +LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c" +LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) +LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = no # LED animations +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) + +#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. +#### Do not enable these with audio at the same time. + +### Helix keyboard 'default' keymap: convenient command line option +## make HELIX=<options> helix:defualt +## option= oled | back | under | na | ios +## ex. +## make HELIX=oled helix:defualt +## make HELIX=oled,back helix:defualt +## make HELIX=oled,under helix:defualt +## make HELIX=oled,back,na helix:defualt +## make HELIX=oled,back,ios helix:defualt +## +ifneq ($(strip $(HELIX)),) + ifeq ($(findstring oled,$(HELIX)), oled) + OLED_ENABLE = yes + endif + ifeq ($(findstring back,$(HELIX)), back) + LED_BACK_ENABLE = yes + else ifeq ($(findstring under,$(HELIX)), under) + LED_UNDERGLOW_ENABLE = yes + endif + ifeq ($(findstring na,$(HELIX)), na) + LED_ANIMATIONS = no + endif + ifeq ($(findstring ios,$(HELIX)), ios) + IOS_DEVICE_ENABLE = yes + endif + $(eval $(call HELIX_CUSTOMISE_MSG)) + $(info ) +endif + +# Uncomment these for checking +# jp: コンパイル時にカスタマイズの状態を表示したい時はコメントをはずします。 +# $(eval $(call HELIX_CUSTOMISE_MSG)) +# $(info ) + +ifneq ($(strip $(HELIX_ROWS)), 4) + ifneq ($(strip $(HELIX_ROWS)), 5) + $(error HELIX_ROWS = $(strip $(HELIX_ROWS)) is unexpected value) + endif +endif +OPT_DEFS += -DHELIX_ROWS=$(strip $(HELIX_ROWS)) + +ifeq ($(strip $(LED_BACK_ENABLE)), yes) + RGBLIGHT_ENABLE = yes + OPT_DEFS += -DRGBLED_BACK + ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + $(eval $(call HELIX_CUSTOMISE_MSG)) + $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes') + endif +else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +AUTO_SHIFT_ENABLE = yes + +# Uncomment these for debugging +# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) +# $(info -- OPT_DEFS=$(OPT_DEFS)) +# $(info ) diff --git a/keyboards/helix/rev2/rev2.c b/keyboards/helix/rev2/rev2.c index 75765f1d3..abaa02cdb 100644 --- a/keyboards/helix/rev2/rev2.c +++ b/keyboards/helix/rev2/rev2.c @@ -2,6 +2,12 @@ #ifdef SSD1306OLED +#include "ssd1306.h" + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +} + void led_set_kb(uint8_t usb_led) { // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here //led_set_user(usb_led); diff --git a/keyboards/helix/rev2/rules.mk b/keyboards/helix/rev2/rules.mk index 4ea623c43..5582a0f9c 100644 --- a/keyboards/helix/rev2/rules.mk +++ b/keyboards/helix/rev2/rules.mk @@ -1,4 +1,3 @@ SRC += rev2/matrix.c SRC += rev2/split_util.c SRC += rev2/split_scomm.c -SRC += ws2812.c diff --git a/keyboards/helix/rev2/serial_config.h b/keyboards/helix/rev2/serial_config.h index 8d7e62837..37135213d 100644 --- a/keyboards/helix/rev2/serial_config.h +++ b/keyboards/helix/rev2/serial_config.h @@ -1,15 +1,8 @@ -#ifndef SOFT_SERIAL_CONFIG_H -#define SOFT_SERIAL_CONFIG_H +//// #error rev2 serial config +#ifndef SOFT_SERIAL_PIN /* Soft Serial defines */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect +#define SOFT_SERIAL_PIN D2 #define SERIAL_USE_MULTI_TRANSACTION - -//// #error rev2 serial config - -#endif /* SOFT_SERIAL_CONFIG_H */ +#endif diff --git a/keyboards/helix/rev2/split_scomm.c b/keyboards/helix/rev2/split_scomm.c index 9719eb22e..ada786796 100644 --- a/keyboards/helix/rev2/split_scomm.c +++ b/keyboards/helix/rev2/split_scomm.c @@ -7,8 +7,8 @@ #include <stddef.h> #include <split_scomm.h> #include "serial.h" -#ifdef SERIAL_DEBUG_MODE -#include <avr/io.h> +#ifdef CONSOLE_ENABLE + #include <print.h> #endif uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; @@ -17,6 +17,7 @@ uint8_t volatile status_com = 0; uint8_t volatile status1 = 0; uint8_t slave_buffer_change_count = 0; uint8_t s_change_old = 0xff; +uint8_t s_change_new = 0xff; SSTD_t transactions[] = { #define GET_SLAVE_STATUS 0 @@ -41,12 +42,12 @@ SSTD_t transactions[] = { void serial_master_init(void) { - soft_serial_initiator_init(transactions); + soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } void serial_slave_init(void) { - soft_serial_target_init(transactions); + soft_serial_target_init(transactions, TID_LIMIT(transactions)); } // 0 => no error @@ -54,19 +55,37 @@ void serial_slave_init(void) // 2 => checksum error int serial_update_buffers(int master_update) { - int status; + int status, smatstatus; static int need_retry = 0; - if( s_change_old != slave_buffer_change_count ) { - status = soft_serial_transaction(GET_SLAVE_BUFFER); - if( status == TRANSACTION_END ) - s_change_old = slave_buffer_change_count; + + if( s_change_old != s_change_new ) { + smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); + if( smatstatus == TRANSACTION_END ) { + s_change_old = s_change_new; +#ifdef CONSOLE_ENABLE + uprintf("slave matrix = %b %b %b %b %b\n", + serial_slave_buffer[0], serial_slave_buffer[1], + serial_slave_buffer[2], serial_slave_buffer[3], + serial_slave_buffer[4] ); +#endif + } + } else { + // serial_slave_buffer dosen't change + smatstatus = TRANSACTION_END; // dummy status + } + + if( !master_update && !need_retry) { + status = soft_serial_transaction(GET_SLAVE_STATUS); + } else { + status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); + } + if( status == TRANSACTION_END ) { + s_change_new = slave_buffer_change_count; + need_retry = 0; + } else { + need_retry = 1; } - if( !master_update && !need_retry) - status = soft_serial_transaction(GET_SLAVE_STATUS); - else - status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); - need_retry = ( status == TRANSACTION_END ) ? 0 : 1; - return status; + return smatstatus; } #endif // SERIAL_USE_MULTI_TRANSACTION diff --git a/keyboards/helix/rules.mk b/keyboards/helix/rules.mk index e42f92cf8..be234e60e 100644 --- a/keyboards/helix/rules.mk +++ b/keyboards/helix/rules.mk @@ -2,9 +2,6 @@ SRC += i2c.c SRC += serial.c SRC += ssd1306.c -# if firmware size over limit, try this option -# CFLAGS += -flto - # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -65,7 +62,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SUBPROJECT_rev1 = no USE_I2C = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/helix/serial.c b/keyboards/helix/serial.c index 11ceff0b3..6006ebf1b 100644 --- a/keyboards/helix/serial.c +++ b/keyboards/helix/serial.c @@ -1,5 +1,10 @@ /* * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 */ #ifndef F_CPU @@ -14,10 +19,60 @@ #include "serial.h" //#include <pro_micro.h> -#ifdef USE_SERIAL +#ifdef SOFT_SERIAL_PIN -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif + +#else + #error serial.c now support ATmega32U4 only +#endif + +//////////////// for backward compatibility //////////////////////////////// +#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) +/* --- USE OLD API (compatible with let's split serial.c) */ #if SERIAL_SLAVE_BUFFER_LENGTH > 0 uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; #endif @@ -42,56 +97,118 @@ SSTD_t transactions[] = { }; void serial_master_init(void) -{ soft_serial_initiator_init(transactions); } +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } void serial_slave_init(void) -{ soft_serial_target_init(transactions); } +{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } // 0 => no error // 1 => slave did not respond // 2 => checksum error int serial_update_buffers() -{ return soft_serial_transaction(); } +{ + int result; + result = soft_serial_transaction(); + return result; +} -#endif // Simple API (OLD API, compatible with let's split serial.c) +#endif // end of OLD API (compatible with let's split serial.c) +//////////////////////////////////////////////////////////////////////////// #define ALWAYS_INLINE __attribute__((always_inline)) #define NO_INLINE __attribute__((noinline)) #define _delay_sub_us(x) __builtin_avr_delay_cycles(x) -// Serial pulse period in microseconds. -#define TID_SEND_ADJUST 14 +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif -#define SELECT_SERIAL_SPEED 1 -#if SELECT_SERIAL_SPEED == 0 +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 // Very High speed #define SERIAL_DELAY 4 // micro sec - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 1 + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 // High speed #define SERIAL_DELAY 6 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 2 + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 // Middle speed #define SERIAL_DELAY 12 // micro sec #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 3 + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 // Low speed #define SERIAL_DELAY 24 // micro sec #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles -#elif SELECT_SERIAL_SPEED == 4 + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 // Very Low speed - #define SERIAL_DELAY 50 // micro sec + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif #else -#error Illegal Serial Speed -#endif - +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ #define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) #define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) @@ -105,17 +222,21 @@ int serial_update_buffers() #endif static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; +inline static void serial_delay(void) ALWAYS_INLINE; inline static void serial_delay(void) { _delay_us(SERIAL_DELAY); } +inline static void serial_delay_half1(void) ALWAYS_INLINE; inline static void serial_delay_half1(void) { _delay_us(SERIAL_DELAY_HALF1); } +inline static void serial_delay_half2(void) ALWAYS_INLINE; inline static void serial_delay_half2(void) { _delay_us(SERIAL_DELAY_HALF2); @@ -135,6 +256,7 @@ void serial_input_with_pullup(void) { SERIAL_PIN_PORT |= SERIAL_PIN_MASK; } +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; inline static uint8_t serial_read_pin(void) { return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); @@ -152,30 +274,28 @@ void serial_high(void) { SERIAL_PIN_PORT |= SERIAL_PIN_MASK; } -void soft_serial_initiator_init(SSTD_t *sstd_table) +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) { Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; serial_output(); serial_high(); } -void soft_serial_target_init(SSTD_t *sstd_table) +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) { Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; serial_input_with_pullup(); -#if SERIAL_PIN_MASK == _BV(PD0) - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -#elif SERIAL_PIN_MASK == _BV(PD2) - // Enable INT2 - EIMSK |= _BV(INT2); - // Trigger on falling edge of INT2 - EICRA &= ~(_BV(ISC20) | _BV(ISC21)); + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; #else - #error unknown SERIAL_PIN_MASK value + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; #endif } @@ -191,7 +311,7 @@ void sync_recv(void) { } // Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void)NO_INLINE; +static void sync_send(void) NO_INLINE; static void sync_send(void) { serial_low(); @@ -205,12 +325,12 @@ static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { uint8_t byte, i, p, pb; _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = 0; i < bit; i++ ) { + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { serial_delay_half1(); // read the middle of pulses if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; + byte = (byte << 1) | 1; p ^= 1; } else { - byte = (byte << 1) | 0; p ^= 0; + byte = (byte << 1) | 0; p ^= 0; } _delay_sub_us(READ_WRITE_WIDTH_ADJUST); serial_delay_half2(); @@ -230,13 +350,13 @@ static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; void serial_write_chunk(uint8_t data, uint8_t bit) { uint8_t b, p; - for( p = 0, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); } /* send parity bit */ if(p & 1) { serial_high(); } @@ -288,6 +408,13 @@ void change_reciver2sender(void) { serial_delay_half1(); //4 } +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + // interrupt handle to be used by the target device ISR(SERIAL_PIN_INTERRUPT) { @@ -297,12 +424,15 @@ ISR(SERIAL_PIN_INTERRUPT) { SSTD_t *trans = Transaction_table; #else // recive transaction table index - uint8_t tid; + uint8_t tid, bits; uint8_t pecount = 0; sync_recv(); - tid = serial_read_chunk(&pecount,4); - if(pecount> 0) + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { return; + } serial_delay_half1(); serial_high(); // response step1 low->high @@ -315,17 +445,17 @@ ISR(SERIAL_PIN_INTERRUPT) { // target send phase if( trans->target2initiator_buffer_size > 0 ) serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); + trans->target2initiator_buffer_size); // target switch to input change_sender2reciver(); // target recive phase if( trans->initiator2target_buffer_size > 0 ) { if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; } else { - *trans->status = TRANSACTION_DATA_ERROR; + *trans->status = TRANSACTION_DATA_ERROR; } } else { *trans->status = TRANSACTION_ACCEPTED; @@ -349,6 +479,8 @@ int soft_serial_transaction(void) { SSTD_t *trans = Transaction_table; #else int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; SSTD_t *trans = &Transaction_table[sstd_index]; #endif cli(); @@ -375,9 +507,10 @@ int soft_serial_transaction(int sstd_index) { #else // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); sync_send(); _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(sstd_index, 4); + serial_write_chunk(tid, 7); serial_delay_half1(); // wait for the target response (step1 low->high) @@ -389,12 +522,12 @@ int soft_serial_transaction(int sstd_index) { // check if the target is present (step2 high->low) for( int i = 0; serial_read_pin(); i++ ) { if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; } _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); } @@ -404,12 +537,12 @@ int soft_serial_transaction(int sstd_index) { // if the target is present syncronize with it if( trans->target2initiator_buffer_size > 0 ) { if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; } } @@ -419,7 +552,7 @@ int soft_serial_transaction(int sstd_index) { // initiator send phase if( trans->initiator2target_buffer_size > 0 ) { serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); + trans->initiator2target_buffer_size); } // always, release the line when not in use @@ -442,3 +575,16 @@ int soft_serial_get_and_clean_status(int sstd_index) { #endif #endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/helix/serial.h b/keyboards/helix/serial.h index d2b7fd8e6..2e53928df 100644 --- a/keyboards/helix/serial.h +++ b/keyboards/helix/serial.h @@ -4,40 +4,47 @@ #include <stdbool.h> // ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in serial_config.h +// Need Soft Serial defines in config.h // ///////////////////////////////////////////////////////////////// // ex. -// #define SERIAL_PIN_DDR DDRD -// #define SERIAL_PIN_PORT PORTD -// #define SERIAL_PIN_INPUT PIND -// #define SERIAL_PIN_MASK _BV(PD?) ?=0,2 -// #define SERIAL_PIN_INTERRUPT INT?_vect ?=0,2 +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps // -// //// USE Simple API (OLD API, compatible with let's split serial.c) +// //// USE OLD API (compatible with let's split serial.c) // ex. // #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 // #define SERIAL_MASTER_BUFFER_LENGTH 1 // -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION +// //// USE NEW API +// //// USE simple API (using signle-type transaction function) +// #define SERIAL_USE_SINGLE_TRANSACTION +// //// USE flexible API (using multi-type transaction function) +// #define SERIAL_USE_MULTI_TRANSACTION // // ///////////////////////////////////////////////////////////////// -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ -#if SERIAL_SLAVE_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -#endif -#if SERIAL_MASTER_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -#endif +//////////////// for backward compatibility //////////////////////////////// +#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) +/* --- USE OLD API (compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + #endif -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); + void serial_master_init(void); + void serial_slave_init(void); + int serial_update_buffers(void); -#endif // USE Simple API +#endif // end of USE OLD API +//////////////////////////////////////////////////////////////////////////// // Soft Serial Transaction Descriptor typedef struct _SSTD_t { @@ -47,16 +54,18 @@ typedef struct _SSTD_t { uint8_t target2initiator_buffer_size; uint8_t *target2initiator_buffer; } SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) // initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table); +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); // target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table); +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); // initiator resullt #define TRANSACTION_END 0 #define TRANSACTION_NO_RESPONSE 0x1 #define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 #ifndef SERIAL_USE_MULTI_TRANSACTION int soft_serial_transaction(void); #else @@ -72,7 +81,7 @@ int soft_serial_transaction(int sstd_index); // target: // TRANSACTION_DATA_ERROR // or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x4 +#define TRANSACTION_ACCEPTED 0x8 #ifdef SERIAL_USE_MULTI_TRANSACTION int soft_serial_get_and_clean_status(int sstd_index); #endif diff --git a/keyboards/helix/ssd1306.c b/keyboards/helix/ssd1306.c index b3e55a67c..dd3290ba0 100644 --- a/keyboards/helix/ssd1306.c +++ b/keyboards/helix/ssd1306.c @@ -1,3 +1,4 @@ + #ifdef SSD1306OLED #include "ssd1306.h" @@ -27,12 +28,17 @@ //static uint16_t last_battery_update; //static uint32_t vbat; //#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 60000 /* milliseconds */ #if DEBUG_TO_SCREEN static uint8_t displaying; #endif static uint16_t last_flush; +static bool force_dirty = true; + // Write command sequence. // Returns true on success. static inline bool _send_cmd1(uint8_t cmd) { @@ -318,12 +324,19 @@ void iota_gfx_task_user(void) { void iota_gfx_task(void) { iota_gfx_task_user(); - if (display.dirty) { + if (display.dirty|| force_dirty) { iota_gfx_flush(); + force_dirty = false; } if (timer_elapsed(last_flush) > ScreenOffInterval) { iota_gfx_off(); } } + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + #endif diff --git a/keyboards/helix/ssd1306.h b/keyboards/helix/ssd1306.h index 77ce7c211..9cf6983b7 100644 --- a/keyboards/helix/ssd1306.h +++ b/keyboards/helix/ssd1306.h @@ -4,6 +4,7 @@ #include <stdbool.h> #include <stdio.h> #include "pincontrol.h" +#include "action.h" enum ssd1306_cmds { DisplayOff = 0xAE, @@ -87,6 +88,6 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data); void matrix_write_P(struct CharacterMatrix *matrix, const char *data); void matrix_render(struct CharacterMatrix *matrix); - +bool process_record_gfx(uint16_t keycode, keyrecord_t *record); #endif |