diff options
Diffstat (limited to 'keyboards/massdrop/ctrl/config.h')
| -rw-r--r-- | keyboards/massdrop/ctrl/config.h | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h new file mode 100644 index 000000000..31eccda87 --- /dev/null +++ b/keyboards/massdrop/ctrl/config.h @@ -0,0 +1,126 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xEED2 +#define DEVICE_VER 0x0101 + +#define MANUFACTURER "Massdrop Inc." +#define PRODUCT "CTRL Keyboard" +#define SERIAL_NUM "Unavailable" + +/* key matrix size */ +#define MATRIX_ROWS 11 +#define MATRIX_COLS 8 + +/* MCU Port name definitions */ +#define PA 0 +#define PB 1 + +/* Port and Pin definition of key row hardware configuration */ +#define MATRIX_ROW_PORTS PB, PB, PB, PB, PB, PB, PA, PA, PB, PB, PB +#define MATRIX_ROW_PINS 4, 5, 6, 7, 8, 9, 10, 11, 10, 11, 12 + +/* Port and Pin definition of key column hardware configuration */ +#define MATRIX_COL_PORTS PA, PA, PA, PA, PA, PA, PA, PA +#define MATRIX_COL_PINS 0, 1, 2, 3, 4, 5, 6, 7 + +/* This Shift Register expands available hardware output lines to control additional peripherals */ +/* It uses four lines from the MCU to provide 16 output lines */ +/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */ +#define SR_EXP_RCLK_PORT PB +#define SR_EXP_RCLK_PIN 14 +/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */ +#define SR_EXP_OE_N_PORT PB +#define SR_EXP_OE_N_PIN 15 +/* SERCOM port to use for Shift Register SPI */ +/* DATAOUT and SCLK must be configured to use hardware pins of this port */ +#define SR_EXP_SERCOM SERCOM2 +/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */ +#define SR_EXP_DATAOUT_PORT PA +#define SR_EXP_DATAOUT_PIN 12 +#define SR_EXP_DATAOUT_MUX 2 +/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */ +#define SR_EXP_SCLK_PORT PA +#define SR_EXP_SCLK_PIN 13 +#define SR_EXP_SCLK_MUX 2 + +/* Debug LED (Small LED Located near MCU) */ +#define DEBUG_LED_ENABLE 1 +#define DEBUG_LED_PORT PA +#define DEBUG_LED_PIN 27 + +/* Additional debugging ports */ +/* PCB M21 */ +#define DEBUG_PORT1_ENABLE 1 +#define DEBUG_PORT1_PORT PB +#define DEBUG_PORT1_PIN 3 +/* PCB M23 */ +#define DEBUG_PORT2_ENABLE 1 +#define DEBUG_PORT2_PORT PB +#define DEBUG_PORT2_PIN 17 +/* PCB M25 */ +#define DEBUG_PORT3_ENABLE 1 +#define DEBUG_PORT3_PORT PA +#define DEBUG_PORT3_PIN 20 + +/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */ +/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */ +/* Feature is automatically disabled after successful boot */ +/* PCB M27 */ +#define DEBUG_BOOT_TRACING_ENABLE 1 +#define DEBUG_BOOT_TRACING_PORT PB +#define DEBUG_BOOT_TRACING_PIN 23 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Force boot in NKRO mode */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION |