diff options
Diffstat (limited to 'keyboards/mechmini/readme.md')
| -rw-r--r-- | keyboards/mechmini/readme.md | 62 |
1 files changed, 11 insertions, 51 deletions
diff --git a/keyboards/mechmini/readme.md b/keyboards/mechmini/readme.md index ef0602297..56dd81a24 100644 --- a/keyboards/mechmini/readme.md +++ b/keyboards/mechmini/readme.md @@ -1,13 +1,17 @@ -mechmini +Mechmini ======== -A compact ortholinear/staggered keyboard. +A 40% compact ortholinear/staggered keyboard. -Keyboard Maintainer: QMK Community -Hardware Supported: mechmini PCB -Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0-pcb +Version 1 was originally bootmapper (ps2avrGB) and can be ported to QMK following the v1 readme (../mechmini/v1/readme.md). This version is no longer in production. -Make example for this keyboard (after setting up your build environment): +Version 2 (Mechmini 2.0) was shipped powered by QMK [More info on MECHKEYS](https://mechkeys.ca). + +Keyboard Maintainer: QMK Community (version 1) & [TurboMech](https://github.com/TurboMech) (version 2 - aka Mechmini 2.0) +Hardware Supported: Mechmini keyboard +Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0 + +Make example for this keyboard (after setting up your build environment), this will make the Mechmini 2.0 default keymap (split space) - please see v1 readme for v1 make instructions: make mechmini:default @@ -15,50 +19,6 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) ## Mechmini Notes -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -## Installing - -First, install the requirements. These commands are for OSX, but all you -need is the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `./program` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -Then, with the keyboard plugged in, simply run this command from the -`qmk_firmware` directory: - -``` -$ make mechmini:program -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it -in the bootloader: - -``` -$ make mechmini -$ bootloadHID -r mechmini_default.hex -``` - -## Troubleshooting +There are 2 versions of the Mechmini keyboard. Please read the readme for the version you have for make instructions. -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. -1. Try plugging the board in while pressing `L_Ctrl`. This will force it - to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. |