diff options
Diffstat (limited to 'keyboards/meira/keymaps/grahampheath/readme.md')
| -rw-r--r-- | keyboards/meira/keymaps/grahampheath/readme.md | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/keyboards/meira/keymaps/grahampheath/readme.md b/keyboards/meira/keymaps/grahampheath/readme.md new file mode 100644 index 000000000..10459e356 --- /dev/null +++ b/keyboards/meira/keymaps/grahampheath/readme.md @@ -0,0 +1,55 @@ +# Graham's Meira. + +Don't expect this to work for you unaltered! For the record, these are my notes, not a guide for you :-) + +## Known issues: +Anything over 28k will begin to overwrite the boot loader, which is a pain! + +Be sure to check file size with: +``` +avr-size meira_promicro_grahampheath.hex +``` + +## Sounds +I've added a [8ohm 0.5W speaker](http://a.co/6MIKZSy), its a bit large, but it fits in approximately the same space as the ProMicro. I soldered directly to PC6 and GND. + +As the Meira code stood, adding sound increased the hex beyond what the boot loader could handle, so I had to dial way back on features that I wasnt using, like backlighting and RGB support. I also removed function keys, though I think you could restore some of these features, you certainly can't restore all of them and still fit with a boot loader. + +## Build + +Built for the ProMicro with: +``` +make meira/promicro:grahampheath +``` + +Build and upload with, which is cool because it will sense your port. +``` +make meira/promicro:grahampheath:avrdude +``` + +Program a hex directly with: +``` +avrdude -p atmega32u4 -P /dev/tty.usbmodem14111 -c avr109 -v -e -D -U flash:w:meira_promicro_grahampheath.hex +``` + +If you use an AVRISP you will be program a hex without a boot loader: +``` +avrdude -p atmega32u4 -P /dev/tty.usbmodem14111 -c avrisp -v -e -U flash:w:meira_promicro_grahampheath.hex +``` + +## Bricked +Did you overwrite your boot loader? + +I did... + +I used an [Ardunio as an ISP](https://learn.sparkfun.com/tutorials/installing-an-arduino-bootloader), and was able to program various boot loaders. Ultimately it seemed like this was the right combo: + +[ProMicro pinout](https://cdn.sparkfun.com/assets/9/c/3/c/4/523a1765757b7f5c6e8b4567.png) + +[Wiring](https://forum.arduino.cc/index.php?PHPSESSID=467mm69btif69hdj5e3gil5465&action=dlattach;topic=363341.0;attach=145820): [via u/dmjlambert](https://forum.arduino.cc/index.php?topic=363341.0) + +ProMicro boot loader hex is called `Caterina-promicro16.hex` and is stored on [Sparkfun's GitHub](https://github.com/sparkfun/Arduino_Boards) + +``` +avrdude -c avrisp -p m32u4 -P /dev/tty.usbmodem14141 -v -e -U flash:w:Caterina-promicro16.hex -U efuse:w:0xcb:m -U hfuse:w:0xd8:m -U lfuse:w:0xff:m +``` |