diff options
Diffstat (limited to 'keyboards/sweet16')
| -rw-r--r-- | keyboards/sweet16/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/sweet16/config.h | 58 | ||||
| -rw-r--r-- | keyboards/sweet16/keymaps/default/keymap.c | 26 | ||||
| -rw-r--r-- | keyboards/sweet16/readme.md | 14 | ||||
| -rw-r--r-- | keyboards/sweet16/rules.mk | 56 | ||||
| -rw-r--r-- | keyboards/sweet16/sweet16.c | 1 | ||||
| -rw-r--r-- | keyboards/sweet16/sweet16.h | 30 |
7 files changed, 188 insertions, 0 deletions
diff --git a/keyboards/sweet16/Makefile b/keyboards/sweet16/Makefile new file mode 100644 index 000000000..0011010fd --- /dev/null +++ b/keyboards/sweet16/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/sweet16/config.h b/keyboards/sweet16/config.h new file mode 100644 index 000000000..77d9e276d --- /dev/null +++ b/keyboards/sweet16/config.h @@ -0,0 +1,58 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x2010 +#define DEVICE_VER 0x0001 +#define MANUFACTURER 1up Keyboards +#define PRODUCT Sweet16 +#define DESCRIPTION 4x4 grid + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F4, F5, F6, F7 } +#define MATRIX_COL_PINS { D1, D0, D4, C6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +#define RGB_DI_PIN B1 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 1 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif
\ No newline at end of file diff --git a/keyboards/sweet16/keymaps/default/keymap.c b/keyboards/sweet16/keymaps/default/keymap.c new file mode 100644 index 000000000..c429d2456 --- /dev/null +++ b/keyboards/sweet16/keymaps/default/keymap.c @@ -0,0 +1,26 @@ +#include "sweet16.h" + +enum custom_keycodes { + UP_URL = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_4x4( + KC_7, KC_8, KC_9, KC_ASTR, + KC_4, KC_5, KC_6, KC_SLSH, + KC_1, KC_2, KC_3, KC_MINS, + KC_0, KC_ENT, KC_DOT, KC_EQL + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case UP_URL: + if (record->event.pressed) { + SEND_STRING("http://1upkeyboads.com"); + } + return false; + break; + } + return true; +}
\ No newline at end of file diff --git a/keyboards/sweet16/readme.md b/keyboards/sweet16/readme.md new file mode 100644 index 000000000..db75c7206 --- /dev/null +++ b/keyboards/sweet16/readme.md @@ -0,0 +1,14 @@ +Sweet16 +=== + +A 4x4 numpad/macro pad sold by 1up Keyboards - designed by Bishop Keyboards + +Keyboard Maintainer: QMK Community +Hardware Supported: Sweet16 Keyboard PCB +Hardware Availability: [1up Keyboards](https://1upkeyboards.com/) + +Make example for this keyboard (after setting up your build environment): + + make sweet16-default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/sweet16/rules.mk b/keyboards/sweet16/rules.mk new file mode 100644 index 000000000..212e74059 --- /dev/null +++ b/keyboards/sweet16/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/sweet16/sweet16.c b/keyboards/sweet16/sweet16.c new file mode 100644 index 000000000..2f116c2a3 --- /dev/null +++ b/keyboards/sweet16/sweet16.c @@ -0,0 +1 @@ +#include "sweet16.h"
\ No newline at end of file diff --git a/keyboards/sweet16/sweet16.h b/keyboards/sweet16/sweet16.h new file mode 100644 index 000000000..23d411a89 --- /dev/null +++ b/keyboards/sweet16/sweet16.h @@ -0,0 +1,30 @@ +#ifndef KB_H +#define KB_H + +#include "quantum.h" + +#define LAYOUT_ortho_4x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} + +#define LAYOUT_numpad_4x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K23, \ + K31, K32 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} + +#endif
\ No newline at end of file |