diff options
Diffstat (limited to 'keyboards/thevankeyboards/roadkit')
29 files changed, 1488 insertions, 0 deletions
diff --git a/keyboards/thevankeyboards/roadkit/config.h b/keyboards/thevankeyboards/roadkit/config.h new file mode 100644 index 000000000..9596f7f3b --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEAE +#define PRODUCT_ID 0x8846 +#define DEVICE_VER 0x0001 +#define MANUFACTURER TheVan Keyboards +#define PRODUCT Roadkit Micro +#define DESCRIPTION keyboard firmware for Roadkit Micro + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F5, D7, B4 } +#define MATRIX_COL_PINS { F1, F4, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/thevankeyboards/roadkit/info.json b/keyboards/thevankeyboards/roadkit/info.json new file mode 100644 index 000000000..839ac73fb --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Roadkit", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 4, + "layouts": { + "LAYOUT_numpad_4x4": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0, "h":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}] + }, + "LAYOUT_ortho_4x4": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}] + } + } +} diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/config.h b/keyboards/thevankeyboards/roadkit/keymaps/default/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/default/keymap.c new file mode 100644 index 000000000..4ec0f6cfd --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NP 0 + +// Macro name shortcuts +#define NUMPAD M(_NP) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NP] = LAYOUT_numpad_4x4( /* Numpad */ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, KC_PDOT \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _NP: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_NP); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/readme.md b/keyboards/thevankeyboards/roadkit/keymaps/default/readme.md new file mode 100644 index 000000000..5984a71d1 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for roadkit diff --git a/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/default/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/config.h b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/keymap.c new file mode 100644 index 000000000..fed9d0270 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/keymap.c @@ -0,0 +1,219 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +void backlight_toggle(void){ +}; + +enum roadkit_layers { + _NUMPAD, + _FPH, + _FPHNOISY, + _ADJUST, + _DYN +}; + +enum roadkit_keycodes { + NUMPAD = SAFE_RANGE, + FPH_1, + FPH_2, + FPH_3, + FPH_4, + FPH_5, + FPH_6, + FPH_7, + FPH_8, + FPH_9, + FN_0, + BACKLIT, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make keymaps cleaner looking +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ + LT(_ADJUST, KC_KP_0), KC_KP_DOT \ + ), + [_FPH] = LAYOUT_numpad_4x4( /* Quiet T9 */ + FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ + FPH_4, FPH_5, FPH_6, \ + FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ + LT(_ADJUST, KC_SPACE), KC_KP_DOT \ + ), + [_FPHNOISY] = LAYOUT_numpad_4x4( /* Noisy T9 */ + FPH_7, FPH_8, FPH_9, KC_KP_PLUS, \ + FPH_4, FPH_5, FPH_6, \ + FPH_1, FPH_2, FPH_3, SFT_T(KC_KP_ENTER), \ + LT(_ADJUST, KC_SPACE), KC_KP_DOT \ + ), + [_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */ + KC_NUMLOCK, TG(_FPHNOISY), TG(_FPH), TG(_NUMPAD), \ + KC_BSPC, BACKLIT, KC_DEL, \ + MACSLEEP, _______, _______, _______, \ + _______, MO(_DYN) \ + ), + [_DYN] = LAYOUT_numpad_4x4( /* DYNAMIC MACRO */ + DYN_REC_START1, DYN_REC_START2, _______, DYN_REC_STOP, \ + _______, _______, _______, \ + DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ + _______, _______ \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +uint16_t fph_tap_qty = false; +uint16_t fph_keycode = 0; // stores which spacebar was used, either raise or lower... + +uint16_t get_render_keycode(uint16_t keycode, uint16_t tap_qty){ // maybe replace shift with "mods" + tap_qty--; // reduce by one to match array indexes. + switch(keycode){ + case FPH_2: + {uint16_t kc[] = {KC_A, KC_B, KC_C}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_3: + {uint16_t kc[] = {KC_D, KC_E, KC_F}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_4: + {uint16_t kc[] = {KC_G, KC_H, KC_I}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_5: + {uint16_t kc[] = {KC_J, KC_K, KC_L}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_6: + {uint16_t kc[] = {KC_M, KC_N, KC_O}; + if(tap_qty % 6 > 2) + return LSFT(kc[tap_qty % 3]); + return kc[tap_qty % 3];} + break; + case FPH_7: + {uint16_t kc[] = {KC_P, KC_Q, KC_R, KC_S}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_8: + {uint16_t kc[] = {KC_T, KC_U, KC_V}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_9: + {uint16_t kc[] = {KC_W, KC_X, KC_Y, KC_Z}; + if(tap_qty % 8 > 2) + return LSFT(kc[tap_qty % 4]); + return kc[tap_qty % 4];} + break; + case FPH_1: + {uint16_t kc[] = {KC_COMM, LSFT(KC_SLSH), KC_EXLM, KC_AT, KC_MINS, KC_UNDS, KC_PLUS, \ + KC_SCLN, LSFT(KC_SCLN), KC_QUOT, LSFT(KC_QUOT), KC_TILD, \ + KC_PIPE, KC_BSLS, KC_HASH, LSFT(KC_4), KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, \ + KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, LSFT(KC_COMM), LSFT(KC_DOT)}; + return kc[tap_qty % 26];} + } + return KC_NO; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_dynamic_macro(keycode, record)) { + return false; + } + uint8_t layer; + layer = biton32(layer_state); + + switch (keycode) { + case FPH_1 ... FPH_9: + if(layer == _FPHNOISY){ + if (record->event.pressed) { + if(fph_keycode != keycode) { // key change + fph_tap_qty = 0; + fph_keycode = keycode; + } else { // same key tapped again so erase and increment. + register_code(KC_BSPC); + unregister_code(KC_BSPC); + fph_tap_qty++; + } + uint16_t render_keycode = get_render_keycode(keycode, fph_tap_qty); + // find mods? Apply mods.. + register_code(render_keycode); + unregister_code(render_keycode); + } else { + // do we need to do anything on key-release? + } + } else { // not noisy, be demure . + if (record->event.pressed) { + if(fph_keycode != keycode) { // key change, kill everything. + uint16_t render_keycode = get_render_keycode(fph_keycode, fph_tap_qty); + // find mods? Apply mods.. + register_code(render_keycode); + unregister_code(render_keycode); + fph_keycode = keycode; + fph_tap_qty = 0; + } else { // same key tapped again so increment counter silently + fph_tap_qty++; + } + } else { + // do we need to do anything on key-release? + // maybe start a timer on this one? + } + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/readme.md b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/readme.md new file mode 100644 index 000000000..ad630be19 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/readme.md @@ -0,0 +1,26 @@ +# Flip Phone layout for Roadkit + +BEWARE, THIS DOES NOT WORK YET. + +Uses the numpad with classic cellular phone style letters assigned to the numbers. + +# LAYERS + +* Numpad - The layer that matches the caps mostly +* FPH - Base layer for text +* FPHNOISY - Text layer that outputs every character and then backspaces as they're replaced +* DYN - dynamic macro layer for recording and playing macros + +## FPH + +Poke the "2" key twice and it makes "B". + +## FPHNOISY + +Poke the "2" key twice and it makes "A"+backspace+"B" so you can see it cycle through. + +## MACROS + +May be able to record macros with the T9 layer because the "KC_*"s are only sent +at the end. Trying to do a macro with T9NOISY would probably fill up the buffer +in just a few characters. diff --git a/keyboards/thevankeyboards/roadkit/keymaps/flipphone/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/rules.mk new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/flipphone/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/khord/config.h b/keyboards/thevankeyboards/roadkit/keymaps/khord/config.h new file mode 100644 index 000000000..da6ed7189 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/khord/config.h @@ -0,0 +1,15 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#define TAPPING_TERM 175 + +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B5 + #define BACKLIGHT_LEVELS 3 + #define BACKLIGHT_ON_STATE 0 +#endif + +#endif diff --git a/keyboards/thevankeyboards/roadkit/keymaps/khord/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/khord/keymap.c new file mode 100644 index 000000000..9111f4f89 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/khord/keymap.c @@ -0,0 +1,112 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _NP 0 +#define _L1 1 +#define _L2 2 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +enum custom_keycodes { + NUMPAD = SAFE_RANGE, + ADMIN, + SMSPC1, + STR192, + STR255 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Numpad + * ,-----------------------. + * | 7 | 8 | 9 |Bksp | + * |-----`-----`-----`-----| + * | 4 | 5 | 6 | Tab | + * |-----`-----`-----`-----| + * | 1 | 2 | 3 |Enter| + * |-----`-----`-----`-----| + * | 0 |Space| . | / | + * `-----`-----`-----`-----' + * | L1 | L2 | | | Layer hold + */ + [_NP] = LAYOUT_ortho_4x4( /* Numpad */ + KC_P7, KC_P8, KC_P9, KC_BSPC, \ + KC_P4, KC_P5, KC_P6, KC_TAB, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + LT(1, KC_P0), LT(2, KC_SPC), KC_PDOT, KC_PSLS + ), + + /* L1 + * ,-----------------------. + * |Reset| | | Del | + * |-----`-----`-----`-----| + * | Left| Down| Up |Right| + * |-----`-----`-----`-----| + * | 192.| 255 | | | + * |-----`-----`-----`-----| + * |_____| LED | . | | + * `-----`-----`-----`-----' + */ + [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ + RESET, XXXXXXX, XXXXXXX, KC_DEL, \ + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \ + STR192, STR255, XXXXXXX, XXXXXXX, \ + _______, BL_STEP, _______, XXXXXXX + ), + + /* L2 + * ,-----------------------. + * | | | str | str | + * |-----`-----`-----`-----| + * | | | | | + * |-----`-----`-----`-----| + * | | | | | + * |-----`-----`-----`-----| + * | |_____| | | + * `-----`-----`-----`-----' + */ + [_L2] = LAYOUT_ortho_4x4( /* LAYER 2 */ + XXXXXXX, XXXXXXX, ADMIN, SMSPC1, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, _______, XXXXXXX, XXXXXXX + ) +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case ADMIN: + if (record->event.pressed) { + SEND_STRING("Administrator"); + } + return false; + break; + case SMSPC1: + if (record->event.pressed) { + SEND_STRING("Simspace1!"); + } + return false; + break; + case STR192: + if (record->event.pressed) { + SEND_STRING("192.168."); + } + return false; + break; + case STR255: + if (record->event.pressed) { + SEND_STRING("255"); + } + return false; + break; + } + return true; +}; diff --git a/keyboards/thevankeyboards/roadkit/keymaps/khord/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/khord/rules.mk new file mode 100644 index 000000000..9f3c958bd --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/khord/rules.mk @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = no # Enable Tap Dance functionality + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/thevankeyboards/roadkit/keymaps/mjt/config.h b/keyboards/thevankeyboards/roadkit/keymaps/mjt/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/mjt/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/mjt/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/mjt/keymap.c new file mode 100644 index 000000000..a1af5b1f2 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/mjt/keymap.c @@ -0,0 +1,239 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +void backlight_toggle(void){ +}; + +enum roadkit_layers { + _NUMPAD, + _NAVIGATION, + _EXCEL, + _ADJUST, + _DYN +}; + +enum minivan_keycodes { + NUMPAD = SAFE_RANGE, + NAVIGATION, + EXCEL, + NUMPAD_LOCK, + NAVIGATION_LOCK, + EXCEL_LOCK, + PARENS, + BRACKETS, + BRACES, + BACKLIT, + MACSLEEP, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +// Fillers to make keymaps cleaner looking +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */ + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, \ + KC_KP_1, KC_KP_2, KC_KP_3, NAVIGATION, \ + EXCEL, KC_KP_DOT + ), + [_EXCEL] = LAYOUT_numpad_4x4( /* Excel related */ + KC_KP_SLASH, KC_KP_ASTERISK, KC_MINS, KC_TAB, \ + KC_QUOT, KC_KP_EQUAL, PARENS, \ + KC_DQT, BRACKETS, BRACES, _______, \ + _______, MO(_DYN) + ), + [_NAVIGATION] = LAYOUT_numpad_4x4( /* Navigation */ + KC_HOME, _______, KC_PGUP, KC_TAB, \ + KC_END, KC_UP, KC_PGDN, \ + KC_LEFT, KC_DOWN, KC_RIGHT, _______, \ + _______, MO(_DYN) + ), + [_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */ + KC_NUMLOCK, MACSLEEP, BACKLIT, _______, \ + KC_BSPC, _______, KC_DEL, \ + EXCEL_LOCK, NUMPAD_LOCK, NAVIGATION_LOCK, _______, \ + _______, _______ + ), + [_DYN] = LAYOUT_numpad_4x4( /* DYNAMIC MACRO */ + DYN_REC_START1, DYN_REC_START2, _______, _______, \ + _______, _______, _______, \ + DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \ + _______, _______ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_numpad[][2] = SONG(QWERTY_SOUND); +float tone_excel[][2] = SONG(DVORAK_SOUND); +float tone_navigation[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool fn_tap_used = false; // sets to false when space is pressed, + // sets to true when any other key is pressed, + //when space is lifted, if another key was prssed, don't send space. +uint16_t fn_keycode = 0; // stores which spacebar was used, either raise or lower... + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_dynamic_macro(keycode, record)) { + return false; + } + + switch (keycode) { + case NAVIGATION: // This key is enter if tapped, navigation if held + if (record->event.pressed) { + fn_keycode = NAVIGATION; // these two lines figure out if the next action is + fn_tap_used = false; + layer_on(_NAVIGATION); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + } else { + layer_off(_NAVIGATION); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + if(!fn_tap_used && fn_keycode == NAVIGATION ){ + register_code(KC_KP_ENTER); + unregister_code(KC_KP_ENTER); + fn_keycode = 0; + fn_tap_used = false; + } + } + return false; + break; + case EXCEL: + if (record->event.pressed) { + fn_keycode = EXCEL; + fn_tap_used = false; + layer_on(_EXCEL); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + } else { + layer_off(_EXCEL); + update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST); + if(!fn_tap_used && fn_keycode == EXCEL ){ + register_code(KC_KP_0); + unregister_code(KC_KP_0); + fn_keycode = 0; + fn_tap_used = false; + } + } + return false; + break; + default: + fn_tap_used = true; + break; // don't return because this just handles the spacebars. + } + // this is the normal keycode processing switch from Planck default layout. + switch (keycode) { + case NUMPAD_LOCK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_numpad, false, 0); + #endif + persistant_default_layer_set(1UL<<_NUMPAD); + } + return false; + break; + case NAVIGATION_LOCK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_navigation, false, 0); + #endif + persistant_default_layer_set(1UL<<_NAVIGATION); + } + return false; + break; + case EXCEL_LOCK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_excel, false, 0); + #endif + persistant_default_layer_set(1UL<<_EXCEL); + } + return false; + break; + case PARENS: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_9); + unregister_code(KC_9); + register_code(KC_0); + unregister_code(KC_0); + register_code(KC_RSFT); + register_code(KC_LEFT); + unregister_code(KC_LEFT); + } + return false; + break; + case BRACKETS: + if (record->event.pressed) { + register_code(KC_LBRC); + unregister_code(KC_LBRC); + register_code(KC_RBRC); + unregister_code(KC_RBRC); + register_code(KC_LEFT); + unregister_code(KC_LEFT); + } + return false; + break; + case BRACES: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_LBRC); + unregister_code(KC_LBRC); + register_code(KC_RBRC); + unregister_code(KC_RBRC); + unregister_code(KC_RSFT); + register_code(KC_LEFT); + unregister_code(KC_LEFT); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} diff --git a/keyboards/thevankeyboards/roadkit/keymaps/mjt/readme.md b/keyboards/thevankeyboards/roadkit/keymaps/mjt/readme.md new file mode 100644 index 000000000..80c0e5240 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/mjt/readme.md @@ -0,0 +1,22 @@ +# Mike's custom keymap for roadkit + +Based on the 13 key layout. + +## LAYERS + +* Numpad - The layer that matches the caps +* Excel - / * - = and () [] {} macros +* Navigation - arrow keys and home/end +* ADJUST - just like planck adjust, lets you set default layer. +* DYN - dynamic macro layer for recording and playing macros + +## MACROS + +Sadly, the dynamic macros are probably going worthless because they keys that +they record have to be pressed on this keyboard. This keyboard doesn't have +most letters... + +## LEADER KEYS + +This board would probably be better with the user of leader keys instead of +complex layers with a raise/lower setup... Something to look into for later. diff --git a/keyboards/thevankeyboards/roadkit/keymaps/mjt/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/mjt/rules.mk new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/mjt/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singles/config.h b/keyboards/thevankeyboards/roadkit/keymaps/singles/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singles/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singles/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/singles/keymap.c new file mode 100644 index 000000000..4c246f513 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singles/keymap.c @@ -0,0 +1,61 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NP 0 +#define _L1 1 + +// Macro name shortcuts +#define NUMPAD M(_NP) +#define LAYER1 M(_L1) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_NP] = LAYOUT_ortho_4x4( /* Numpad */ + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \ + KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, \ + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \ + KC_KP_0, KC_KP_DOT, TG(_L1), KC_BSPC + ), + [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ + KC_NUMLOCK, _______, _______, KC_VOLU, \ + _______, KC_UP, _______, KC_VOLD, \ + KC_LEFT, KC_DOWN, KC_RIGHT, _______, \ + _______, _______, _______, _______ + ) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _L1: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_L1); + } + break; + case _NP: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_NP); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singles/readme.md b/keyboards/thevankeyboards/roadkit/keymaps/singles/readme.md new file mode 100644 index 000000000..48ea4a8b3 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singles/readme.md @@ -0,0 +1,3 @@ +# The singles keymap for roadkit + +This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point. diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singles/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/singles/rules.mk new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singles/rules.mk @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/config.h b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/config.h new file mode 100644 index 000000000..57468e122 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/config.h @@ -0,0 +1,15 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#define TAPPING_TERM 175 + +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B5 + #define BACKLIGHT_LEVELS 3 + #define BACKLIGHT_ON_STATE 0 +#endif + +#endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/keymap.c b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/keymap.c new file mode 100644 index 000000000..b4da80e28 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/keymap.c @@ -0,0 +1,242 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NP 0 +#define _L1 1 +#define _L2 2 +#define _L3 3 + +// Macro name shortcuts +#define NUMPAD M(_NP) +#define LAYER1 M(_L1) +#define LAYER2 M(_L2) +#define LAYER3 M(_L3) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +void matrix_init_user(void) { + backlight_level(4); +} + + + +//Tap Dance Declarations + +enum { + + TD_EQUAL_NP = 0, + TD_KP_PLUS_L1, + TD_DOT_L2, + TD_0_L3 + +}; + +//Tap Dance Definitions + + + //TD equal to turn on layer NP +void _td_equal_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_EQUAL); + } else if (state->count == 2) { + backlight_set(3); + layer_on(_NP); + layer_off(_L1); + layer_off(_L2); + layer_off(_L3); + } +} + +void _td_equal_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_EQUAL); + } +} + + + //TD kp plus to toggle layer 1 +void _td_kp_plus_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_KP_PLUS); + } else if (state->count == 2) { +// layer_invert(_L1); + backlight_set(2); + layer_on(_L1); + layer_off(_L2); + layer_off(_L3); + } +} + +void _td_kp_plus_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_KP_PLUS); + } +} + + + //TD dot to toggle layer 2 +void _td_dot_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_DOT); + } else if (state->count == 2) { + backlight_set(1); + layer_on(_L2); + layer_off(_L1); + layer_off(_L3); + } +} + +void _td_dot_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_DOT); + } +} + + //TD 0 to toggle layer 3 +void _td_0_tg_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code(KC_0); + } else if (state->count == 2) { + backlight_set(0); + layer_on(_L3); + layer_off(_L1); + layer_off(_L2); + } +} + +void _td_0_tg_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code(KC_0); + } +} + +//TD Actions +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_EQUAL_NP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_equal_tg_finished, _td_equal_tg_reset), + [TD_KP_PLUS_L1] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_kp_plus_tg_finished, _td_kp_plus_tg_reset), + [TD_DOT_L2] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_dot_tg_finished, _td_dot_tg_reset), + [TD_0_L3] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, _td_0_tg_finished, _td_0_tg_reset) +}; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Numberpad + * ,-----------------------. + * | 7 | 8 | 9 | / | + * |-----`-----`-----`-----| + * | 4 | 5 | 6 | * | + * |-----`-----`-----`-----| + * | 1 | 2 | 3 | - | + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + * Tapdances: + * | L3 | L2 | L1 | NP | + * `-----`-----`-----`-----' + */ + [_NP] = LAYOUT_ortho_4x4( /* Numpad */ + KC_7, KC_8, KC_9, KC_SLASH, \ + KC_4, KC_5, KC_6, KC_KP_ASTERISK, \ + KC_1, KC_2, KC_3, KC_MINUS, \ + TD(TD_0_L3), TD(TD_DOT_L2), TD(TD_KP_PLUS_L1), TD(TD_EQUAL_NP) + ), + + /* L1 + * ,-----------------------. + * | Esc |Bksp |Home |PgUp | + * |-----`-----`-----`-----| + * | Tab | Up | End |PgDn | + * |-----`-----`-----`-----| + * |Left |Down |Right|Enter| + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + */ + [_L1] = LAYOUT_ortho_4x4( /* LAYER 1 */ + KC_ESCAPE, KC_BSPACE, KC_HOME, KC_PGUP, \ + KC_TAB, KC_UP, KC_END, KC_PGDOWN, \ + KC_LEFT, KC_DOWN, KC_RIGHT, KC_KP_ENTER, \ + _______, _______, _______, _______ + ), + + /* L2 + * ,-----------------------. + * |Sleep|LClik|RClik|VolUp| + * |-----`-----`-----`-----| + * |AltF4| F11 |WinTb|VolDn| + * |-----`-----`-----`-----| + * |PrvTk|Play |NxtTk|Mute | + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + */ + [_L2] = LAYOUT_ortho_4x4( /* LAYER 2 */ + KC_SYSTEM_SLEEP, KC_MS_BTN1, KC_MS_BTN2, KC_AUDIO_VOL_UP, \ + LALT(KC_F4), KC_F11, LGUI(KC_TAB), KC_AUDIO_VOL_DOWN, \ + KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, \ + _______, _______, _______, _______ + ), + + /* L3 needs cut, copy, paste, undo, again (redo), find, calc, www back, www forward, F5 + * ,-----------------------. + * |WBack|WHome|WFor | F5 | + * |-----`-----`-----`-----| + * |Calc |Undo |Redo |WSrch| + * |-----`-----`-----`-----| + * | Cut |Copy |Paste|Find | + * |-----`-----`-----`-----| + * | 0 | . | + | = | + * `-----`-----`-----`-----' + */ + [_L3] = LAYOUT_ortho_4x4( /* LAYER 3 */ + KC_SYSTEM_SLEEP, KC_MS_BTN1, KC_MS_BTN2, KC_AUDIO_VOL_UP, \ + LALT(KC_F4), KC_F11, LGUI(KC_TAB), KC_AUDIO_VOL_DOWN, \ + KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK, KC_AUDIO_MUTE, \ + _______, _______, _______, _______ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t * action_get_macro(keyrecord_t * record, uint8_t id, uint8_t opt) { + switch (id) { + case _L3: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_L3); + } + break; + case _L2: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_L2); + } + break; + case _L1: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_L1); + } + break; + case _NP: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_NP); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/readme.md b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/readme.md new file mode 100644 index 000000000..48ea4a8b3 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/readme.md @@ -0,0 +1,3 @@ +# The singles keymap for roadkit + +This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point. diff --git a/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/rules.mk b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/rules.mk new file mode 100644 index 000000000..b61d6cca2 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/keymaps/singlesBrent/rules.mk @@ -0,0 +1,22 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = yes # Enable Tap Dance functionality + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/thevankeyboards/roadkit/readme.md b/keyboards/thevankeyboards/roadkit/readme.md new file mode 100644 index 000000000..e4af2dcc0 --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/readme.md @@ -0,0 +1,13 @@ +# Roadkit + +A programmable macro pad. + +Keyboard Maintainer: QMK Community +Hardware Supported: Roadkit PCB +Hardware Availability: https://thevankeyboards.com/collections/catalog/products/road-kit-diy?variant=603645345806 + +Make example for this keyboard (after setting up your build environment): + + make thevankeyboards/roadkit:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/thevankeyboards/roadkit/roadkit.c b/keyboards/thevankeyboards/roadkit/roadkit.c new file mode 100644 index 000000000..26e0c51ec --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/roadkit.c @@ -0,0 +1,28 @@ +#include "roadkit.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/thevankeyboards/roadkit/roadkit.h b/keyboards/thevankeyboards/roadkit/roadkit.h new file mode 100644 index 000000000..62cfabc5e --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/roadkit.h @@ -0,0 +1,33 @@ +#ifndef ROADKIT_H +#define ROADKIT_H + +#include "quantum.h" + +// This is a shortcut to help you visually see your layout. +#define LAYOUT_numpad_4x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K23, \ + K30, K32 \ +) \ +{ \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, KC_NO }, \ + { K20, K21, K22, K23 }, \ + { K30, KC_NO, K32, KC_NO } \ +} + +#define LAYOUT_ortho_4x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) \ +{ \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} + +#endif diff --git a/keyboards/thevankeyboards/roadkit/rules.mk b/keyboards/thevankeyboards/roadkit/rules.mk new file mode 100644 index 000000000..d15a5541b --- /dev/null +++ b/keyboards/thevankeyboards/roadkit/rules.mk @@ -0,0 +1,71 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 + +LAYOUTS = numpad_4x4 ortho_4x4 |