summaryrefslogtreecommitdiffstats
path: root/keyboards/zeal60/zeal60.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/zeal60/zeal60.c')
-rw-r--r--keyboards/zeal60/zeal60.c134
1 files changed, 64 insertions, 70 deletions
diff --git a/keyboards/zeal60/zeal60.c b/keyboards/zeal60/zeal60.c
index 092235ca6..be54f75f3 100644
--- a/keyboards/zeal60/zeal60.c
+++ b/keyboards/zeal60/zeal60.c
@@ -38,6 +38,14 @@ void eeprom_set_valid(bool valid)
eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
}
+void eeprom_reset(void)
+{
+ // Set the Zeal60 specific EEPROM state as invalid.
+ eeprom_set_valid(false);
+ // Set the TMK/QMK EEPROM state as invalid.
+ eeconfig_disable();
+}
+
#ifdef RAW_ENABLE
void raw_hid_receive( uint8_t *data, uint8_t length )
@@ -54,7 +62,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
}
case id_get_keyboard_value:
{
- if ( command_data[0] == 0x01 )
+ if ( command_data[0] == id_uptime )
{
uint32_t value = timer_read32();
command_data[1] = (value >> 24 ) & 0xFF;
@@ -104,6 +112,21 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
break;
}
#endif // RGB_BACKLIGHT_ENABLED
+ case id_eeprom_reset:
+ {
+ eeprom_reset();
+ break;
+ }
+ case id_bootloader_jump:
+ {
+ // Need to send data back before the jump
+ // Informs host that the command is handled
+ raw_hid_send( data, length );
+ // Give host time to read it
+ wait_ms(100);
+ bootloader_jump();
+ break;
+ }
default:
{
// Unhandled message.
@@ -119,74 +142,61 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
#endif
-void bootmagic_lite(void)
+void main_init(void)
{
- // The lite version of TMK's bootmagic.
- // 100% less potential for accidentally making the
- // keyboard do stupid things.
-
- // We need multiple scans because debouncing can't be turned off.
- matrix_scan();
- wait_ms(DEBOUNCING_DELAY);
- wait_ms(DEBOUNCING_DELAY);
- matrix_scan();
-
- // If the Esc and space bar are held down on power up,
- // reset the EEPROM valid state and jump to bootloader.
- // Assumes Esc is at [0,0] and spacebar is at [4,7].
- // This isn't very generalized, but we need something that doesn't
- // rely on user's keymaps in firmware or EEPROM.
- if ( ( matrix_get_row(0) & (1<<0) ) &&
- ( matrix_get_row(4) & (1<<7) ) )
- {
- // Set the Zeal60 specific EEPROM state as invalid.
- eeprom_set_valid(false);
- // Set the TMK/QMK EEPROM state as invalid.
- eeconfig_disable();
- // Jump to bootloader.
- bootloader_jump();
- }
-}
-
-void matrix_init_kb(void)
-{
- bootmagic_lite();
-
// If the EEPROM has the magic, the data is good.
// OK to load from EEPROM.
- if (eeprom_is_valid())
- {
+ if (eeprom_is_valid()) {
#if RGB_BACKLIGHT_ENABLED
backlight_config_load();
#endif // RGB_BACKLIGHT_ENABLED
- // TODO: do something to "turn on" keymaps in EEPROM?
- }
- else
- {
+ } else {
#if RGB_BACKLIGHT_ENABLED
// If the EEPROM has not been saved before, or is out of date,
// save the default values to the EEPROM. Default values
// come from construction of the zeal_backlight_config instance.
backlight_config_save();
#endif // RGB_BACKLIGHT_ENABLED
-
#ifdef DYNAMIC_KEYMAP_ENABLE
// This resets the keymaps in EEPROM to what is in flash.
dynamic_keymap_reset();
#endif
-
// Save the magic number last, in case saving was interrupted
eeprom_set_valid(true);
}
-
#if RGB_BACKLIGHT_ENABLED
// Initialize LED drivers for backlight.
backlight_init_drivers();
-
+
backlight_timer_init();
backlight_timer_enable();
#endif // RGB_BACKLIGHT_ENABLED
+}
+void bootmagic_lite(void)
+{
+ // The lite version of TMK's bootmagic.
+ // 100% less potential for accidentally making the
+ // keyboard do stupid things.
+
+ // We need multiple scans because debouncing can't be turned off.
+ matrix_scan();
+ wait_ms(DEBOUNCING_DELAY);
+ wait_ms(DEBOUNCING_DELAY);
+ matrix_scan();
+
+ // If the Esc (matrix 0,0) is held down on power up,
+ // reset the EEPROM valid state and jump to bootloader.
+ if ( matrix_get_row(0) & (1<<0) ) {
+ eeprom_reset();
+ bootloader_jump();
+ }
+}
+
+void matrix_init_kb(void)
+{
+ bootmagic_lite();
+ main_init();
matrix_init_user();
}
@@ -205,29 +215,22 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record)
process_record_backlight(keycode, record);
#endif // BACKLIGHT_ENABLED
- switch(keycode)
- {
+ switch(keycode) {
case FN_MO13:
- if (record->event.pressed)
- {
+ if (record->event.pressed) {
layer_on(1);
update_tri_layer(1, 2, 3);
- }
- else
- {
+ } else {
layer_off(1);
update_tri_layer(1, 2, 3);
}
return false;
break;
case FN_MO23:
- if (record->event.pressed)
- {
+ if (record->event.pressed) {
layer_on(2);
update_tri_layer(1, 2, 3);
- }
- else
- {
+ } else {
layer_off(2);
update_tri_layer(1, 2, 3);
}
@@ -247,8 +250,7 @@ uint16_t keymap_function_id_to_action( uint16_t function_id )
if ( function_id >= 0x0F00 && function_id <= 0x0FFF )
{
uint8_t id = function_id & 0xFF;
- switch ( id )
- {
+ switch ( id ) {
case TRIPLE_TAP_1_3:
case TRIPLE_TAP_2_3:
{
@@ -293,24 +295,16 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
{
case TRIPLE_TAP_1_3:
case TRIPLE_TAP_2_3:
- if (record->event.pressed)
- {
+ if (record->event.pressed) {
layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 );
-
- if (record->tap.count && !record->tap.interrupted)
- {
- if (record->tap.count >= 3)
- {
+ if (record->tap.count && !record->tap.interrupted) {
+ if (record->tap.count >= 3) {
layer_invert(3);
}
- }
- else
- {
+ } else {
record->tap.count = 0;
}
- }
- else
- {
+ } else {
layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 );
}
break;