diff options
Diffstat (limited to 'keyboards/zeal60')
26 files changed, 2993 insertions, 0 deletions
diff --git a/keyboards/zeal60/config.h b/keyboards/zeal60/config.h new file mode 100644 index 000000000..baa4978a8 --- /dev/null +++ b/keyboards/zeal60/config.h @@ -0,0 +1,125 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "config_common.h" + +// USB Device descriptor parameter +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ZealPC +#define PRODUCT Zeal60 +#define DESCRIPTION Zeal60 (QMK Firmware) + +// key matrix size +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// Zeal60 PCB default pin-out +#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } +#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } +#define UNUSED_PINS + +// IS31FL3731 driver +#define DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL 72 + +// COL2ROW or ROW2COL +#define DIODE_DIRECTION COL2ROW + +// Set 0 if debouncing isn't needed +#define DEBOUNCING_DELAY 5 + +// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap +#define LOCKING_SUPPORT_ENABLE +// Locking resynchronize hack +#define LOCKING_RESYNC_ENABLE + +// key combination for command +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +// disable debug print +//#define NO_DEBUG + +// disable print +//#define NO_PRINT + +// disable action features +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define RGB_BACKLIGHT_ENABLED 1 + +// This conditionally compiles the backlight code for Zeal60 specifics +#define RGB_BACKLIGHT_ZEAL60 + +// enable/disable LEDs based on layout +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 + +// disable backlight when USB suspended (PC sleep/hibernate/shutdown) +#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 + +// disable backlight after timeout in minutes, 0 = no timeout +#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 + +// the default effect (RGB test) +#define RGB_BACKLIGHT_EFFECT 255 + +// These define which keys in the matrix are alphas/mods +// Used for backlight effects so colors are different for +// alphas vs. mods +// Each value is for a row, bit 0 is column 0 +// Alpha=0 Mod=1 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0010000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0001000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 + +// EEPROM usage + +// TODO: refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x451F +#define EEPROM_MAGIC_ADDR 32 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x07 +#define EEPROM_VERSION_ADDR 34 + +// Backlight config starts after EEPROM version +#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 +// Dynamic keymap starts after backlight config (35+37) +#define DYNAMIC_KEYMAP_EEPROM_ADDR 72 + diff --git a/keyboards/zeal60/info.json b/keyboards/zeal60/info.json new file mode 100644 index 000000000..c4234e49a --- /dev/null +++ b/keyboards/zeal60/info.json @@ -0,0 +1,25 @@ +{ + "keyboard_name": "Zeal60", + "url": "", + "maintainer": "Wilba", + "bootloader": "DFU", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + }, + "LAYOUT_60_ansi": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + }, + "LAYOUT_60_iso": { + "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + }, + "LAYOUT_60_ansi_split_bs_rshift": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] + }, + "LAYOUT_60_hhkb": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/zeal60/keymaps/ansi_split_bs_rshift/config.h b/keyboards/zeal60/keymaps/ansi_split_bs_rshift/config.h new file mode 100644 index 000000000..011cf5c5a --- /dev/null +++ b/keyboards/zeal60/keymaps/ansi_split_bs_rshift/config.h @@ -0,0 +1,21 @@ +#pragma once + +/* enable/disable LEDs based on layout */ +#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_7U_SPACEBAR +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 + +#undef RGB_BACKLIGHT_USE_ISO_ENTER +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 + +#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 + diff --git a/keyboards/zeal60/keymaps/ansi_split_bs_rshift/keymap.c b/keyboards/zeal60/keymaps/ansi_split_bs_rshift/keymap.c new file mode 100644 index 000000000..edb4f256b --- /dev/null +++ b/keyboards/zeal60/keymaps/ansi_split_bs_rshift/keymap.c @@ -0,0 +1,38 @@ +// ANSI split backspace/right shift layout for Zeal60 +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// Default layer +[0] = LAYOUT_60_ansi_split_bs_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, FN_MO23, KC_RCTL), + +// Fn1 Layer +[1] = LAYOUT_60_ansi_split_bs_rshift( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn2 Layer +[2] = LAYOUT_60_ansi_split_bs_rshift( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn3 Layer (zeal60 Configuration) +[3] = LAYOUT_60_ansi_split_bs_rshift( + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; diff --git a/keyboards/zeal60/keymaps/default/config.h b/keyboards/zeal60/keymaps/default/config.h new file mode 100644 index 000000000..f8478a3df --- /dev/null +++ b/keyboards/zeal60/keymaps/default/config.h @@ -0,0 +1,20 @@ +#pragma once + +/* enable/disable LEDs based on layout */ +#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_7U_SPACEBAR +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 + +#undef RGB_BACKLIGHT_USE_ISO_ENTER +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 + +#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 diff --git a/keyboards/zeal60/keymaps/default/keymap.c b/keyboards/zeal60/keymaps/default/keymap.c new file mode 100644 index 000000000..3a13cf4d5 --- /dev/null +++ b/keyboards/zeal60/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +// Default layout for Zeal60 +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// Default layer +[0] = LAYOUT_60_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO13, FN_MO23, KC_RCTL), + +// Fn1 Layer +[1] = LAYOUT_60_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL , + KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn2 Layer +[2] = LAYOUT_60_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn3 Layer (zeal60 Configuration) +[3] = LAYOUT_60_ansi( + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; diff --git a/keyboards/zeal60/keymaps/hhkb/config.h b/keyboards/zeal60/keymaps/hhkb/config.h new file mode 100644 index 000000000..25f74d3d2 --- /dev/null +++ b/keyboards/zeal60/keymaps/hhkb/config.h @@ -0,0 +1,20 @@ +#pragma once + +/* enable/disable LEDs based on layout */ +#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 + +#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 + +#undef RGB_BACKLIGHT_USE_7U_SPACEBAR +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 + +#undef RGB_BACKLIGHT_USE_ISO_ENTER +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 + +#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1 diff --git a/keyboards/zeal60/keymaps/hhkb/keymap.c b/keyboards/zeal60/keymaps/hhkb/keymap.c new file mode 100644 index 000000000..5cedc6e5e --- /dev/null +++ b/keyboards/zeal60/keymaps/hhkb/keymap.c @@ -0,0 +1,38 @@ +// HHKB layout for Zeal60 +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// Default layer +[0] = LAYOUT_60_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13, + KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23), + +// Fn1 Layer +[1] = LAYOUT_60_hhkb( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn2 Layer +[2] = LAYOUT_60_hhkb( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn3 Layer (zeal60 Configuration) +[3] = LAYOUT_60_hhkb( + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; diff --git a/keyboards/zeal60/keymaps/iso/config.h b/keyboards/zeal60/keymaps/iso/config.h new file mode 100644 index 000000000..c96ef1f05 --- /dev/null +++ b/keyboards/zeal60/keymaps/iso/config.h @@ -0,0 +1,20 @@ +#pragma once + +/* enable/disable LEDs based on layout */ +#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 1 + +#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_7U_SPACEBAR +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 + +#undef RGB_BACKLIGHT_USE_ISO_ENTER +#define RGB_BACKLIGHT_USE_ISO_ENTER 1 + +#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 diff --git a/keyboards/zeal60/keymaps/iso/keymap.c b/keyboards/zeal60/keymaps/iso/keymap.c new file mode 100644 index 000000000..55120f05e --- /dev/null +++ b/keyboards/zeal60/keymaps/iso/keymap.c @@ -0,0 +1,38 @@ +// ISO layout for Zeal60 +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// Default layer +[0] = LAYOUT_60_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO13, FN_MO23, KC_RCTL), + +// Fn1 Layer +[1] = LAYOUT_60_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL , + KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn2 Layer +[2] = LAYOUT_60_iso( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +// Fn3 Layer (zeal60 Configuration) +[3] = LAYOUT_60_iso( + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; diff --git a/keyboards/zeal60/keymaps/ryanmaclean/config.h b/keyboards/zeal60/keymaps/ryanmaclean/config.h new file mode 100644 index 000000000..f1531eb34 --- /dev/null +++ b/keyboards/zeal60/keymaps/ryanmaclean/config.h @@ -0,0 +1,21 @@ +#pragma once + +/* enable/disable LEDs based on layout */ +#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 + +#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 + +#undef RGB_BACKLIGHT_USE_7U_SPACEBAR +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 + +#undef RGB_BACKLIGHT_USE_ISO_ENTER +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 + +#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 + diff --git a/keyboards/zeal60/keymaps/ryanmaclean/keymap.c b/keyboards/zeal60/keymaps/ryanmaclean/keymap.c new file mode 100644 index 000000000..2e342b497 --- /dev/null +++ b/keyboards/zeal60/keymaps/ryanmaclean/keymap.c @@ -0,0 +1,84 @@ +// Ryan MacLean's layout for Zeal60 +// Note that LGUI and RGUI are swapped with LALT and RALT respectively, for use with Macs +// Also note that Control has replaced Caps Lock, and that pressing left or right shift once +// will output left parenthese and right parenthese respectively. +#include QMK_KEYBOARD_H + +// [0,13] is either left key of split backspace (e.g. HHKB \| key) or 2U backspace +// [1,13] is either backslash or ISO Enter +// [2,12] is either ANSI Enter or key left of ISO Enter +// [2,13] is right key of split backspace (e.g. HHKB `~ key) +// [3,1] is right key of split left-shift (e.g ISO key) +// [3,13] is right key of split right-shift (e.g. HHKB Fn key) + + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. KC_LSFT KC_LALT KC_LGUI KC_4 +{ + switch(id) { + case 0: // macOS screenshot to capture are to clipboard - this would trigger when you hit a key mapped as M(0) + if (record->event.pressed) { + return MACRO( D(LSFT), D(LCTL), D(LGUI), T(4), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes + } + break; + case 1: // macOS screenshot capture area to file - this would trigger when you hit a key mapped as M(1) + if (record->event.pressed) { + return MACRO( D(LSFT), D(LGUI), T(4), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes + } + break; + case 2: // macOS screenshot to clipboard - this would trigger when you hit a key mapped as M(2) + if (record->event.pressed) { + return MACRO( D(LSFT), D(LCTL), D(LGUI), T(3), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes + } + break; + case 3: // macOS screenshot to file - this would trigger when you hit a key mapped as M(3) + if (record->event.pressed) { + return MACRO( D(LSFT), D(LGUI), T(3), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes + } + break; + } + return MACRO_NONE; +}; + +#define CADETL MT(KC_LSFT, KC_LBRC) +#define CADETR MT(KC_RSFT, KC_RBRC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// Default layer +[0] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC}, + {KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_GRV}, + {KC_LSPO, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, FN_MO13}, + {KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, FN_MO23} +}, + +// Fn1 Layer +[1] = { + {KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS}, + {KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL}, + {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, + +// Fn2 Layer +[2] = { + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, M(2), M(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, M(1), M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, + +// Fn3 Layer (zeal60 Configuration) +[3] = { + {KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +} + +}; diff --git a/keyboards/zeal60/keymaps/tusing/Makefile b/keyboards/zeal60/keymaps/tusing/Makefile new file mode 100644 index 000000000..762905da0 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/Makefile @@ -0,0 +1,6 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +RGBLIGHT_ENABLE = yes +AUDIO_ENABLE = no # Underglow cannot be used with audio. diff --git a/keyboards/zeal60/keymaps/tusing/README.md b/keyboards/zeal60/keymaps/tusing/README.md new file mode 100644 index 000000000..edddf1c58 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/README.md @@ -0,0 +1,80 @@ +# RGB Underglow Strip on the Zeal60: A Guide + +<img src="https://i.imgur.com/UuUdOCb.jpg" width="800"> + +## Requirements + +- WS2812B RGB strip, preferably 60 LEDs/meter +- Wire, solder +- Tape, hot glue, or some sort of adhesive + +## A. Connecting the strip +You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7329/files/zeal60jumpers.png) helpful. Ignore the red boxes! + +1. Connect V+ to the receiving end of the thermistor labeled F1; connect GND to the board's GND pin. (*Avoid connecting +V to the board's +5V pin* - you will likely overload the thermistor, and you will limit your maximum brightness.) + + <img src="https://i.imgur.com/jd7qivh.png" width="300"> + +2. Connect DI to PB0. + + <img src="https://i.imgur.com/BiMyMLv.jpg" width="300"> + +3. Should look something like this when finished: + + <img src="https://i.imgur.com/ngxYMuA.jpg" width="600"> + +*Optional:* To allow considerably more light to escape, consider angling the strip outwards by using some sort of fulcrum under the strip. (I used a thick wire.) + +## B. Enabling the strip +1. If it is not present already, add the following to your ***keymap's*** ```Makefile```: + + ```Makefile + RGBLIGHT_ENABLE = yes + AUDIO_ENABLE = no #Underglow animations cannot be used with audio. + ``` +2. If it is not present already, add the following to your *keymap's* ```config.h```, and edit the values as necessary: + + ```c + // Set up RGB underglow. + #define RGB_DI_PIN B0 // The pin your RGB strip is wired to + #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) + #define RGBLED_NUM 35 // Number of LEDs + #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue + #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat + #define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val + ``` +3. If they are not present already, add the following keycodes to your keymap to control the RGB strip: ```RGB_TOG``` (on/off), ```RGB_MOD``` (step through modes), ```RGB_HUI```, ```RGB_HUD```, ```RGB_SAI```, ```RGB_SAD```, ```RGB_VAI```, ```RGB_VAD``` (HSV increase/decrease). Add these to your keymap. + +## C. Dealing with current limits +USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide up to 900mA; USB 3.1 up to 1.5A; and powered USB hubs even more. We can run our keyboard at a higher brightness if we draw more power. **The Zeal60 uses 500mA at max brightness.** This means that **you have about 400mA remaining for the strip to use on a USB 3.0 port**; 1000mA free on a USB 3.1 port, so on and so forth. + +***Warning:*** **This means you will need to turn *off* your RGB strip before connecting to a USB 2.0 port**, as USB 2.0 cannot sustain the current necessary! + +1. If not present already, add the following to your keymap's ```config.h```. Change the numbers based on your needs. The ones below are safe underestimates. + + ```c + // Enable current limiting for RGB underglow. + #define RGBSTRIP_CURRENT_LIMIT 400 // Strip current limit in mA. (USB amperage - 500mA for keyboard) + #define RGBSTRIP_MAX_CURRENT_PER_LIGHT 50 // mA per light when at max brightness. + ``` + *Example:* I use a USB port capable of providing 1800 mA. The keyboard uses 500mA, so my personal value (in the `tusing` keymap) for `RGBSTRIP_CURRENT_LIMIT` is 1300. The particular WS2812B RGB strip I have uses a maximum of 60 mA per LED, so that is my personal value for `RGBSTRIP_MAX_CURRENT_PER_LIGHT`. +2. Toggle on the LED strip (```RGB_TOG```) and step through animations (```RGB_MOD```) to test it out! + +## D. Sources and resources +### A. Connecting the strip. +* [In-depth description of connecting an RGB strip to the GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4d5or2/my_first_custom_build_satan_gh60_rbg_underglow_in/d1nz3o7/) +* [32U4 Pinout](https://40.media.tumblr.com/93b6bbd4113418c2b45459bb177e67c5/tumblr_mi49a20QMB1s5t695o1_1280.png) +* [Redditor describes connecting RGB strips on his Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4hbjw4/finally_finished_my_satan_gh60_also_granite_o/d2qn8zx/?context=3) +* [Another Redditor on RGB with the Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4ewzdx/gh60_satan_with_the_rgb_mod/d251uu6/ ) + +### B. Enabling the strip. +* [QMK Wiki portion on underglow](https://github.com/jackhumbert/qmk_firmware/wiki#rgb-under-glow-mod) +* [Planck ```Makefile```, ```config.h```, and ```keymap.c``` config example](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/planck/keymaps/yang) +* [Video demonstrating keycode functions and RGB modes on a KC60](https://www.youtube.com/watch?v=VKrpPAHlisY) + +### C. Dealing with current limits. +* [Discussion of cutting jumpers and adding resistors to lower current from Zeal60](https://www.reddit.com/r/MechanicalKeyboards/comments/5hou92/photos_zeal60_lets_just_say_santa_came_early_this/db23qid/) +* [A selection of 900mA-1.5A current hold fuses - look for an SMD 0805-sized fuse.](https://goo.gl/748avG) +* [Video detailing technique to solder 0805 resistors](https://www.youtube.com/watch?v=PU7wLcuqc-I&t=123s&list=FLheMlKEVQ5cmVXazUt6HrxQ&index=2) +* [QMK feature request to implement max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/issues/954) +* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7)
\ No newline at end of file diff --git a/keyboards/zeal60/keymaps/tusing/config.h b/keyboards/zeal60/keymaps/tusing/config.h new file mode 100644 index 000000000..93f260946 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/config.h @@ -0,0 +1,40 @@ +#pragma once + +/* Enable/disable LEDs based on layout. */ +#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 + +#undef RGB_BACKLIGHT_USE_7U_SPACEBAR +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 + +#undef RGB_BACKLIGHT_USE_ISO_ENTER +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 + +#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 + +// Set up RGB underglow. +#define RGB_DI_PIN B0 // The pin your RGB strip is wired to +#define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) +#define RGBLED_NUM 35 // Number of LEDs +#define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue +#define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat +#define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val + +// Enable current limiting for RGB underglow. +#define RGBSTRIP_CURRENT_LIMIT 1300 // Strip current limit in mA. (USB amperage - 500mA for keyboard) +#define RGBSTRIP_MAX_CURRENT_PER_LIGHT 40 // mA per light when at max brightness. + +// Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c. +// This allows to mitigate uneven brightness from LED underglow strips. +// #define LED_BRIGHTNESS_CORRECTION + +// Prevent modifiers on layer 1 from persisting after we let go +#define PREVENT_STUCK_MODIFIERS + diff --git a/keyboards/zeal60/keymaps/tusing/keymap.c b/keyboards/zeal60/keymaps/tusing/keymap.c new file mode 100644 index 000000000..41d2effd4 --- /dev/null +++ b/keyboards/zeal60/keymaps/tusing/keymap.c @@ -0,0 +1,49 @@ +// Default layout for Zeal60 +#include QMK_KEYBOARD_H + +// For readability. +#define _______ KC_TRNS +#define _x_ KC_NO +#define AUD_PRV LCTL(KC_MPRV) // Previous music track +#define AUD_PLY LCTL(KC_MPLY) // Pause music +#define AUD_NXT LCTL(KC_MNXT) // Next music track + +// Zeal60-specific keys: +// EF_INC, EF_DEC, // next/previous backlight effect +// H1_INC, H1_DEC, // Color 1 hue increase/decrease +// S1_INC, S1_DEC, // Color 1 saturation increase/decrease +// H2_INC, H2_DEC, // Color 2 hue increase/decrease +// S2_INC, S2_DEC, // Color 2 saturation increase/decrease +// BR_INC, BR_DEC, // backlight brightness increase/decrease + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// Default layer: Pressing caps-lock momentarily switches to Layer 1. +// This is the default layer. Pressing an empty keycode on another layer will take you here. + [0] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS}, + {MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, _x_ }, + {KC_LSFT, _x_ , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _x_ }, + {KC_LCTL, KC_LGUI, KC_LALT, _x_ , _x_ , _x_ , _x_ , KC_SPC, _x_ , _x_ , KC_LEFT, KC_UP, KC_DOWN, KC_RGHT} + }, + +// Layer 1: Pressing enter switches to layer 2, where backlight controls live. +// This is a momentary layer: once you let go of caps, you'll be back in layer 1. + [1] = { + {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL }, + {_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, KC_DEL, _______}, + {_______, AUD_PRV, AUD_PLY, AUD_NXT, _______, _______, _______, _______, _______, _______, _______, _______, TO(2) , _x_ }, + {KC_CAPS, _x_ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _x_ }, + {KC_RCTL, KC_RGUI, KC_RALT, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , KC_HOME, KC_PGUP, KC_PGDN, KC_END} + }, + +// Layer 2: Zeal60 and backlight configuration. (Get here quickly by pressing Caps+Enter from Layer 1.) +// This is a persistent layer. Get back to the default layer by pressing enter. + [2] = { + {RESET, EF_DEC, EF_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, _______, _______, _______, _______, _______, _______, _______}, + {_______, H1_DEC, H1_INC, S1_DEC, S1_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, H2_DEC, H2_INC, S2_DEC, S2_INC, _______, _______, _______, _______, _______, _______, _______, TO(0) , _x_ }, + {RGB_MOD, _x_ , RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _x_ }, + {RGB_TOG, RGB_VAD, RGB_VAI, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , _______, _______, _______, _______} + } +}; diff --git a/keyboards/zeal60/readme.md b/keyboards/zeal60/readme.md new file mode 100644 index 000000000..9eca28f83 --- /dev/null +++ b/keyboards/zeal60/readme.md @@ -0,0 +1,47 @@ +Zeal60 +==== + + + +This is a 60% PCB with per-key RGB LEDs and supports ANSI, ISO, winkey/winkeyless bottom row, HHKB-layout (split right shift and backspace). + +Keyboard Maintainer: [Wilba](http://wilba.tech/) and on [github](https://github.com/Wilba6582) +Hardware Supported: Zeal60 PCB Rev 0-3 +Hardware Availability: https://zealpc.net/collections/group-buy-pre-orders/products/zeal60rgb + +Make example for this keyboard (after setting up your build environment): + + make zeal60:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + +RGB Backlight Configuration +==== + +A keymap (in the keymaps directory) can optionally configure which RGB backlight LEDs are used, depending on the needs of the layout, by adding a config.h file in the keymap's directory. +The following #define symbols will enable/disable a feature using 1 or 0. + + RGB_BACKLIGHT_USE_SPLIT_BACKSPACE + +Split backspace is being used, enables the right LED of the split backspace (the top-right corner) + + RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT + +Split left shift is being used (i.e. ISO layout), enables the right LED of the split left shift (the ISO key) + + RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT + +Split right shift is being used (i.e. HHKB style layouts), enables the right LED of the split right shift (the Fn key) + + RGB_BACKLIGHT_USE_7U_SPACEBAR + +A 7U spacebar is being used, controls the LEDs under the right stabilizer (of 7U spacebar) and right Alt (if 6.25U spacebar). + + RGB_BACKLIGHT_USE_ISO_ENTER + +An ISO Enter is being used. Only used to tweak the location of the LED being used under ANSI Enter/backslash + + RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS + +Disables the LEDs under HHKB corner blockers, useful for transparent cases. diff --git a/keyboards/zeal60/rgb_backlight.c b/keyboards/zeal60/rgb_backlight.c new file mode 100644 index 000000000..9f62a8d38 --- /dev/null +++ b/keyboards/zeal60/rgb_backlight.c @@ -0,0 +1,1519 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#if RGB_BACKLIGHT_ENABLED + +#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) +#else +#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A +#endif + +#include "zeal60.h" +#include "rgb_backlight.h" +#include "rgb_backlight_api.h" +#include "rgb_backlight_keycodes.h" + +#include <avr/io.h> +#include <util/delay.h> +#include <avr/interrupt.h> +#include "progmem.h" + +#include "quantum/color.h" +#include "drivers/avr/i2c_master.h" +#include "drivers/issi/is31fl3731.h" + +#define BACKLIGHT_EFFECT_MAX 10 + +backlight_config g_config = { + .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE, + .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT, + .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT, + .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR, + .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER, + .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS, + .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED, + .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT, + .brightness = 255, + .effect = RGB_BACKLIGHT_EFFECT, + .effect_speed = 0, + .color_1 = { .h = 0, .s = 255, .v = 255 }, + .color_2 = { .h = 127, .s = 255, .v = 255 }, + .caps_lock_indicator = { .color = { .h = 0, .s = 0, .v = 255 }, .index = 255 }, + .layer_1_indicator = { .color = { .h = 0, .s = 0, .v = 255 }, .index = 255 }, + .layer_2_indicator = { .color = { .h = 0, .s = 0, .v = 255 }, .index = 255 }, + .layer_3_indicator = { .color = { .h = 0, .s = 0, .v = 255 }, .index = 255 }, + .alphas_mods = { + RGB_BACKLIGHT_ALPHAS_MODS_ROW_0, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_1, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_2, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_3, + RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 } +}; + +bool g_suspend_state = false; +uint8_t g_indicator_state = 0; + +// Global tick at 20 Hz +uint32_t g_tick = 0; + +// Ticks since this key was last hit. +uint8_t g_key_hit[72]; + +// Ticks since any key was last hit. +uint32_t g_any_key_hit = 0; + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +#define ISSI_ADDR_1 0x74 +#define ISSI_ADDR_2 0x76 + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C2_1, C3_1, C4_1}, // LA0 + {0, C1_1, C3_2, C4_2}, // LA1 + {0, C1_2, C2_2, C4_3}, // LA2 + {0, C1_3, C2_3, C3_3}, // LA3 + {0, C1_4, C2_4, C3_4}, // LA4 + {0, C1_5, C2_5, C3_5}, // LA5 + {0, C1_6, C2_6, C3_6}, // LA6 + {0, C1_7, C2_7, C3_7}, // LA7 + {0, C1_8, C2_8, C3_8}, // LA8 + {0, C9_1, C8_1, C7_1}, // LA9 + {0, C9_2, C8_2, C7_2}, // LA10 + {0, C9_3, C8_3, C7_3}, // LA11 + {0, C9_4, C8_4, C7_4}, // LA12 + {0, C9_5, C8_5, C7_5}, // LA13 + {0, C9_6, C8_6, C7_6}, // LA14 + {0, C9_7, C8_7, C6_6}, // LA15 + {0, C9_8, C7_7, C6_7}, // LA16 + {0, C8_8, C7_8, C6_8}, // LA17 + + {0, C2_9, C3_9, C4_9}, // LB0 + {0, C1_9, C3_10, C4_10}, // LB1 + {0, C1_10, C2_10, C4_11}, // LB2 + {0, C1_11, C2_11, C3_11}, // LB3 + {0, C1_12, C2_12, C3_12}, // LB4 + {0, C1_13, C2_13, C3_13}, // LB5 + {0, C1_14, C2_14, C3_14}, // LB6 + {0, C1_15, C2_15, C3_15}, // LB7 + {0, C1_16, C2_16, C3_16}, // LB8 + {0, C9_9, C8_9, C7_9}, // LB9 + {0, C9_10, C8_10, C7_10}, // LB10 + {0, C9_11, C8_11, C7_11}, // LB11 + {0, C9_12, C8_12, C7_12}, // LB12 + {0, C9_13, C8_13, C7_13}, // LB13 + {0, C9_14, C8_14, C7_14}, // LB14 + {0, C9_15, C8_15, C6_14}, // LB15 + {0, C9_16, C7_15, C6_15}, // LB16 + {0, C8_16, C7_16, C6_16}, // LB17 + + {1, C2_1, C3_1, C4_1}, // LC0 + {1, C1_1, C3_2, C4_2}, // LC1 + {1, C1_2, C2_2, C4_3}, // LC2 + {1, C1_3, C2_3, C3_3}, // LC3 + {1, C1_4, C2_4, C3_4}, // LC4 + {1, C1_5, C2_5, C3_5}, // LC5 + {1, C1_6, C2_6, C3_6}, // LC6 + {1, C1_7, C2_7, C3_7}, // LC7 + {1, C1_8, C2_8, C3_8}, // LC8 + {1, C9_1, C8_1, C7_1}, // LC9 + {1, C9_2, C8_2, C7_2}, // LC10 + {1, C9_3, C8_3, C7_3}, // LC11 + {1, C9_4, C8_4, C7_4}, // LC12 + {1, C9_5, C8_5, C7_5}, // LC13 + {1, C9_6, C8_6, C7_6}, // LC14 + {1, C9_7, C8_7, C6_6}, // LC15 + {1, C9_8, C7_7, C6_7}, // LC16 + {1, C8_8, C7_8, C6_8}, // LC17 + + {1, C2_9, C3_9, C4_9}, // LD0 + {1, C1_9, C3_10, C4_10}, // LD1 + {1, C1_10, C2_10, C4_11}, // LD2 + {1, C1_11, C2_11, C3_11}, // LD3 + {1, C1_12, C2_12, C3_12}, // LD4 + {1, C1_13, C2_13, C3_13}, // LD5 + {1, C1_14, C2_14, C3_14}, // LD6 + {1, C1_15, C2_15, C3_15}, // LD7 + {1, C1_16, C2_16, C3_16}, // LD8 + {1, C9_9, C8_9, C7_9}, // LD9 + {1, C9_10, C8_10, C7_10}, // LD10 + {1, C9_11, C8_11, C7_11}, // LD11 + {1, C9_12, C8_12, C7_12}, // LD12 + {1, C9_13, C8_13, C7_13}, // LD13 + {1, C9_14, C8_14, C7_14}, // LD14 + {1, C9_15, C8_15, C6_14}, // LD15 + {1, C9_16, C7_15, C6_15}, // LD16 + {1, C8_16, C7_16, C6_16}, // LD17 +}; + + + +typedef struct Point { + uint8_t x; + uint8_t y; +} Point; + + +// index in range 0..71 (LA0..LA17, LB0..LB17, LC0..LC17, LD0..LD17) +// point values in range x=0..224 y=0..64 +// origin is center of top-left key (i.e Esc) +#if defined (RGB_BACKLIGHT_ZEAL65) +const Point g_map_led_to_point[72] PROGMEM = { + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64}, + // LC0..LC17 + {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64} +}; +const Point g_map_led_to_point_polar[72] PROGMEM = { + // LA0..LA17 + {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,247}, + {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255}, + // LB0..LB17 + {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255}, + {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255}, + // LC0..LC17 + {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255}, + {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255}, + // LD0..LD17 + {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {255,201}, {224,181}, {230,217}, {235,255}, + {189,128}, {200,131}, {210,141}, {218,159}, {201,228}, {201,228}, {206,255}, {213,255}, {218,255} +}; +#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) +const Point g_map_led_to_point[72] PROGMEM = { + // LA0..LA17 + {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32}, + {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0}, + // LB0..LB17 + {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255}, + {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255}, + // LC0..LC17 + {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64}, + {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64}, + // LD0..LD17 + {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48}, + {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64} +}; +const Point g_map_led_to_point_polar[72] PROGMEM = { + // LA0..LA17 + {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255}, + {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255}, + // LB0..LB17 + {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255}, + {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255}, + // LC0..LC17 + {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255}, + {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255}, + // LD0..LD17 + {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255}, + {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255} +}; +#endif + +// This may seem counter-intuitive, but it's quite flexible. +// For each LED, get it's position to decide what color to make it. +// This solves the issue of LEDs (and switches) not aligning to a grid, +// or having a large "bitmap" and sampling them. +void map_led_to_point( uint8_t index, Point *point ) +{ + // Slightly messy way to get Point structs out of progmem. + uint8_t *addr = (uint8_t*)&g_map_led_to_point[index]; + point->x = pgm_read_byte(addr); + point->y = pgm_read_byte(addr+1); + + switch (index) + { + case 18+4: // LB4A + if ( g_config.use_split_backspace ) + point->x -= 8; + break; + case 18+14: // LB14A + if ( g_config.use_iso_enter ) + point->y += 8; // extremely pedantic + break; +#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) + case 36+0: // LC0A + if ( g_config.use_7u_spacebar ) + point->x += 10; + break; + case 36+6: // LC6A + if ( g_config.use_7u_spacebar ) + point->x += 4; + break; +#endif + case 36+16: // LC16A + if ( !g_config.use_split_left_shift ) + point->x += 8; + break; + case 54+5: // LD5A + if ( !g_config.use_iso_enter ) + point->x -= 10; + break; + case 54+7: // LD7A + if ( !g_config.use_split_right_shift ) + point->x -= 8; + break; + } +} + +void map_led_to_point_polar( uint8_t index, Point *point ) +{ + // Slightly messy way to get Point structs out of progmem. + uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index]; + point->x = pgm_read_byte(addr); + point->y = pgm_read_byte(addr+1); +} + +// +// Maps switch matrix coordinate (row,col) to LED index +// + + +#if defined (RGB_BACKLIGHT_ZEAL65) +// Note: Left spacebar stab is at 4,3 (LC7) +// Right spacebar stab is at 4,9 (D14) +// +// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, B6 +// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, B7 +// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, B8 +// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15 +// C17, C8, C7, ---, ---, ---, ---, C0, ---, D14, D15, D16, D17, B17, B16 +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 }, + { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 } +}; +#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) +// Note: Left spacebar stab is at 4,3 (LC6) +// Right spacebar stab is at 4,9 (LD13) or 4,10 (LD14) +// +// A17, A16, A15, A14, A13, A12, A11, A10, A9, B0, B1, B2, B3, B4, +// A7, A6, A5, A4, A3, A2, A1, A0, B9, B10, B11, B12, B13, B14, +// A8, C14, C13, C12, C11, C10, C9, D0, D1, D2, D3, D4, D5, B5, +// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, +// C17, C8, C7, C6, ---, ---, ---, C0, ---, D13, D14, D15, D16, D17, +const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 }, + { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 }, + { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 }, + { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 }, + { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 } +}; +#endif + +void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led ) +{ + *led = 255; + if ( row < MATRIX_ROWS && column < MATRIX_COLS ) + { + *led = pgm_read_byte(&g_map_row_column_to_led[row][column]); + } +} + +void backlight_update_pwm_buffers(void) +{ + IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 ); + IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); +} + +void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +{ + IS31FL3731_set_color( index, red, green, blue ); +} + +void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +{ + IS31FL3731_set_color_all( red, green, blue ); +} + +void backlight_set_key_hit(uint8_t row, uint8_t column) +{ + uint8_t led; + map_row_column_to_led(row,column,&led); + g_key_hit[led] = 0; + + g_any_key_hit = 0; +} + +// This is (F_CPU/1024) / 20 Hz +// = 15625 Hz / 20 Hz +// = 781 +#define TIMER3_TOP 781 + +void backlight_timer_init(void) +{ + static uint8_t backlight_timer_is_init = 0; + if ( backlight_timer_is_init ) + { + return; + } + backlight_timer_is_init = 1; + + // Timer 3 setup + TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP + _BV(CS32) | _BV(CS30); // prescale by /1024 + // Set TOP value + uint8_t sreg = SREG; + cli(); + + OCR3AH = (TIMER3_TOP >> 8) & 0xff; + OCR3AL = TIMER3_TOP & 0xff; + SREG = sreg; +} + +void backlight_timer_enable(void) +{ + TIMSK3 |= _BV(OCIE3A); +} + +void backlight_timer_disable(void) +{ + TIMSK3 &= ~_BV(OCIE3A); +} + +void backlight_set_suspend_state(bool state) +{ + g_suspend_state = state; +} + +void backlight_set_indicator_state(uint8_t state) +{ + g_indicator_state = state; +} + +void backlight_effect_rgb_test(void) +{ + // Mask out bits 4 and 5 + // This 2-bit value will stay the same for 16 ticks. + switch ( (g_tick & 0x30) >> 4 ) + { + case 0: + { + backlight_set_color_all( 255, 0, 0 ); + break; + } + case 1: + { + backlight_set_color_all( 0, 255, 0 ); + break; + } + case 2: + { + backlight_set_color_all( 0, 0, 255 ); + break; + } + case 3: + { + backlight_set_color_all( 255, 255, 255 ); + break; + } + } +} + +// This tests the LEDs +// Note that it will change the LED control registers +// in the LED drivers, and leave them in an invalid +// state for other backlight effects. +// ONLY USE THIS FOR TESTING LEDS! +void backlight_effect_single_LED_test(void) +{ + static uint8_t color = 0; // 0,1,2 for R,G,B + static uint8_t row = 0; + static uint8_t column = 0; + + static uint8_t tick = 0; + tick++; + + if ( tick > 2 ) + { + tick = 0; + column++; + } + if ( column > 14 ) + { + column = 0; + row++; + } + if ( row > 4 ) + { + row = 0; + color++; + } + if ( color > 2 ) + { + color = 0; + } + + uint8_t led; + map_row_column_to_led( row, column, &led ); + backlight_set_color_all( 255, 255, 255 ); + backlight_test_led( led, color==0, color==1, color==2 ); +} + +// All LEDs off +void backlight_effect_all_off(void) +{ + backlight_set_color_all( 0, 0, 0 ); +} + +// Solid color +void backlight_effect_solid_color(void) +{ + HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness }; + RGB rgb = hsv_to_rgb( hsv ); + backlight_set_color_all( rgb.r, rgb.g, rgb.b ); +} + +// alphas = color1, mods = color2 +void backlight_effect_alphas_mods(void) +{ + RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } ); + RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } ); + + for ( int row = 0; row < MATRIX_ROWS; row++ ) + { + for ( int column = 0; column < MATRIX_COLS; column++ ) + { + uint8_t index; + map_row_column_to_led( row, column, &index ); + if ( index < 72 ) + { + if ( ( g_config.alphas_mods[row] & (1<<column) ) == 0 ) + { + backlight_set_color( index, rgb1.r, rgb1.g, rgb1.b ); + } + else + { + backlight_set_color( index, rgb2.r, rgb2.g, rgb2.b ); + } + } + } + } +} + +void backlight_effect_gradient_up_down(void) +{ + int16_t h1 = g_config.color_1.h; + int16_t h2 = g_config.color_2.h; + int16_t deltaH = h2 - h1; + + // Take the shortest path between hues + if ( deltaH > 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + // Divide delta by 4, this gives the delta per row + deltaH /= 4; + + int16_t s1 = g_config.color_1.s; + int16_t s2 = g_config.color_2.s; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i<72; i++ ) + { + map_led_to_point( i, &point ); + // The y range will be 0..64, map this to 0..4 + uint8_t y = (point.y>>4); + // Relies on hue being 8-bit and wrapping + hsv.h = g_config.color_1.h + ( deltaH * y ); + hsv.s = g_config.color_1.s + ( deltaS * y ); + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void backlight_effect_raindrops(bool initialize) +{ + int16_t h1 = g_config.color_1.h; + int16_t h2 = g_config.color_2.h; + int16_t deltaH = h2 - h1; + deltaH /= 4; + + // Take the shortest path between hues + if ( deltaH > 127 ) + { + deltaH -= 256; + } + else if ( deltaH < -127 ) + { + deltaH += 256; + } + + int16_t s1 = g_config.color_1.s; + int16_t s2 = g_config.color_2.s; + int16_t deltaS = ( s2 - s1 ) / 4; + + HSV hsv; + RGB rgb; + + // Change one LED every tick + uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % 72 : 255; + + for ( int i=0; i<72; i++ ) + { + // If initialize, all get set to random colors + // If not, all but one will stay the same as before. + if ( initialize || i == led_to_change ) + { + hsv.h = h1 + ( deltaH * ( rand() & 0x03 ) ); + hsv.s = s1 + ( deltaS * ( rand() & 0x03 ) ); + // Override brightness with global brightness control + hsv.v = g_config.brightness;; + + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } + } +} + +void backlight_effect_cycle_all(void) +{ + uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF; + + // Relies on hue being 8-bit and wrapping + for ( int i=0; i<72; i++ ) + { + uint16_t offset2 = g_key_hit[i]<<2; + // stabilizer LEDs use spacebar hits + if ( i == 36+6 || i == 54+13 || // LC6, LD13 + ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 + { + offset2 = g_key_hit[36+0]<<2; + } + offset2 = (offset2<=63) ? (63-offset2) : 0; + + HSV hsv = { .h = offset+offset2, .s = 255, .v = g_config.brightness }; + RGB rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void backlight_effect_cycle_left_right(void) +{ + uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF; + HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i<72; i++ ) + { + uint16_t offset2 = g_key_hit[i]<<2; + // stabilizer LEDs use spacebar hits + if ( i == 36+6 || i == 54+13 || // LC6, LD13 + ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 + { + offset2 = g_key_hit[36+0]<<2; + } + offset2 = (offset2<=63) ? (63-offset2) : 0; + + map_led_to_point( i, &point ); + // Relies on hue being 8-bit and wrapping + hsv.h = point.x + offset + offset2; + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void backlight_effect_cycle_up_down(void) +{ + uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF; + HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i<72; i++ ) + { + uint16_t offset2 = g_key_hit[i]<<2; + // stabilizer LEDs use spacebar hits + if ( i == 36+6 || i == 54+13 || // LC6, LD13 + ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14 + { + offset2 = g_key_hit[36+0]<<2; + } + offset2 = (offset2<=63) ? (63-offset2) : 0; + + map_led_to_point( i, &point ); + // Relies on hue being 8-bit and wrapping + hsv.h = point.y + offset + offset2; + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void backlight_effect_jellybean_raindrops( bool initialize ) +{ + HSV hsv; + RGB rgb; + + // Change one LED every tick + uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % 72 : 255; + + for ( int i=0; i<72; i++ ) + { + // If initialize, all get set to random colors + // If not, all but one will stay the same as before. + if ( initialize || i == led_to_change ) + { + hsv.h = rand() & 0xFF; + hsv.s = rand() & 0xFF; + // Override brightness with global brightness control + hsv.v = g_config.brightness;; + + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } + } +} + +void backlight_effect_cycle_radial1(void) +{ + uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF; + HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i<72; i++ ) + { + map_led_to_point_polar( i, &point ); + // Relies on hue being 8-bit and wrapping + hsv.h = point.x + offset; + hsv.s = point.y; + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void backlight_effect_cycle_radial2(void) +{ + uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF; + + HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness }; + RGB rgb; + Point point; + for ( int i=0; i<72; i++ ) + { + map_led_to_point_polar( i, &point ); + uint8_t offset2 = offset + point.x; + if ( offset2 & 0x80 ) + { + offset2 = ~offset2; + } + offset2 = offset2 >> 2; + hsv.h = g_config.color_1.h + offset2; + hsv.s = 127 + ( point.y >> 1 ); + rgb = hsv_to_rgb( hsv ); + backlight_set_color( i, rgb.r, rgb.g, rgb.b ); + } +} + +void backlight_effect_indicators_set_colors( uint8_t index, HSV hsv ) +{ + RGB rgb = hsv_to_rgb( hsv ); + if ( index == 254 ) + { + backlight_set_color_all( rgb.r, rgb.g, rgb.b ); + } + else + { + backlight_set_color( index, rgb.r, rgb.g, rgb.b ); + + // If the spacebar LED is the indicator, + // do the same for the spacebar stabilizers + if ( index == 36+0 ) // LC0 + { +#if defined (RGB_BACKLIGHT_ZEAL65) + backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7 + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 +#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A) + backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6 + backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13 + if ( g_config.use_7u_spacebar ) + { + backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14 + } +#endif + } + } +} + +// This runs after another backlight effect and replaces +// colors already set +void backlight_effect_indicators(void) +{ + if ( g_config.caps_lock_indicator.index != 255 && + ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) ) ) + { + backlight_effect_indicators_set_colors( g_config.caps_lock_indicator.index, g_config.caps_lock_indicator.color ); + } + + // This if/else if structure allows higher layers to + // override lower ones. If we set layer 3's indicator + // to none, then it will NOT show layer 2 or layer 1 + // indicators, even if those layers are on via the + // MO13/MO23 Fn combo magic. + // + // Basically we want to handle the case where layer 3 is + // still the backlight configuration layer and we don't + // want "all LEDs" indicators hiding the backlight effect, + // but still allow end users to do whatever they want. + if ( IS_LAYER_ON(3) ) + { + if ( g_config.layer_3_indicator.index != 255 ) + { + backlight_effect_indicators_set_colors( g_config.layer_3_indicator.index, g_config.layer_3_indicator.color ); + } + } + else if ( IS_LAYER_ON(2) ) + { + if ( g_config.layer_2_indicator.index != 255 ) + { + backlight_effect_indicators_set_colors( g_config.layer_2_indicator.index, g_config.layer_2_indicator.color ); + } + } + else if ( IS_LAYER_ON(1) ) + { + if ( g_config.layer_1_indicator.index != 255 ) + { + backlight_effect_indicators_set_colors( g_config.layer_1_indicator.index, g_config.layer_1_indicator.color ); + } + } +} + +ISR(TIMER3_COMPA_vect) +{ + // delay 1 second before driving LEDs or doing anything else + static uint8_t startup_tick = 0; + if ( startup_tick < 20 ) + { + startup_tick++; + return; + } + + g_tick++; + + if ( g_any_key_hit < 0xFFFFFFFF ) + { + g_any_key_hit++; + } + + for ( int led = 0; led < 72; led++ ) + { + if ( g_key_hit[led] < 255 ) + { + g_key_hit[led]++; + } + } + + // Factory default magic value + if ( g_config.effect == 255 ) + { + backlight_effect_rgb_test(); + return; + } + + // Ideally we would also stop sending zeros to the LED driver PWM buffers + // while suspended and just do a software shutdown. This is a cheap hack for now. + bool suspend_backlight = ((g_suspend_state && g_config.disable_when_usb_suspended) || + (g_config.disable_after_timeout > 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20)); + uint8_t effect = suspend_backlight ? 0 : g_config.effect; + + // Keep track of the effect used last time, + // detect change in effect, so each effect can + // have an optional initialization. + static uint8_t effect_last = 255; + bool initialize = effect != effect_last; + effect_last = effect; + + // this gets ticked at 20 Hz. + // each effect can opt to do calculations + // and/or request PWM buffer updates. + switch ( effect ) + { + case 0: + backlight_effect_all_off(); + break; + case 1: + backlight_effect_solid_color(); + break; + case 2: + backlight_effect_alphas_mods(); + break; + case 3: + backlight_effect_gradient_up_down(); + break; + case 4: + backlight_effect_raindrops( initialize ); + break; + case 5: + backlight_effect_cycle_all(); + break; + case 6: + backlight_effect_cycle_left_right(); + break; + case 7: + backlight_effect_cycle_up_down(); + break; + case 8: + backlight_effect_jellybean_raindrops( initialize ); + break; + case 9: + backlight_effect_cycle_radial1(); + break; + case 10: + backlight_effect_cycle_radial2(); + break; + default: + backlight_effect_all_off(); + break; + } + + if ( ! suspend_backlight ) + { + backlight_effect_indicators(); + } +} + +void backlight_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column ) +{ + if ( row >= MATRIX_ROWS ) + { + // Special value, 255=none, 254=all + *index = row; + } + else + { + map_row_column_to_led( row, column, index ); + } +} + +// Some helpers for setting/getting HSV +void _set_color( HSV *color, uint8_t *data ) +{ + color->h = data[0]; + color->s = data[1]; + color->v = data[2]; +} + +void _get_color( HSV *color, uint8_t *data ) +{ + data[0] = color->h; + data[1] = color->s; + data[2] = color->v; +} + +void backlight_config_set_value( uint8_t *data ) +{ + bool reinitialize = false; + uint8_t *value_id = &(data[0]); + uint8_t *value_data = &(data[1]); + switch ( *value_id ) + { +#if defined (RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) + case id_use_split_backspace: + { + g_config.use_split_backspace = (bool)*value_data; + reinitialize = true; + break; + } +#endif +#if defined (RGB_BACKLIGHT_ZEAL60) + case id_use_split_left_shift: + { + g_config.use_split_left_shift = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_split_right_shift: + { + g_config.use_split_right_shift = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_7u_spacebar: + { + g_config.use_7u_spacebar = (bool)*value_data; + reinitialize = true; + break; + } + case id_use_iso_enter: + { + g_config.use_iso_enter = (bool)*value_data; + reinitialize = true; + break; + } + case id_disable_hhkb_blocker_leds: + { + g_config.disable_hhkb_blocker_leds = (bool)*value_data; + reinitialize = true; + break; + } +#endif + case id_disable_when_usb_suspended: + { + g_config.disable_when_usb_suspended = (bool)*value_data; + break; + } + case id_disable_after_timeout: + { + g_config.disable_after_timeout = *value_data; + break; + } + case id_brightness: + { + g_config.brightness = *value_data; + break; + } + case id_effect: + { + g_config.effect = *value_data; + break; + } + case id_effect_speed: + { + g_config.effect_speed = *value_data; + break; + } + case id_color_1: + { + _set_color( &(g_config.color_1), value_data ); + break; + } + case id_color_2: + { + _set_color( &(g_config.color_2), value_data ); + break; + } + case id_caps_lock_indicator_color: + { + _set_color( &(g_config.caps_lock_indicator.color), value_data ); + break; + } + case id_caps_lock_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_1_indicator_color: + { + _set_color( &(g_config.layer_1_indicator.color), value_data ); + break; + } + case id_layer_1_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_2_indicator_color: + { + _set_color( &(g_config.layer_2_indicator.color), value_data ); + break; + } + case id_layer_2_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_layer_3_indicator_color: + { + _set_color( &(g_config.layer_3_indicator.color), value_data ); + break; + } + case id_layer_3_indicator_row_col: + { + backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] ); + break; + } + case id_alphas_mods: + { + for ( int i=0; i<5; i++ ) + { + g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) ); + } + } + } + + if ( reinitialize ) + { + backlight_init_drivers(); + } +} + +void backlight_config_get_value( uint8_t *data ) +{ + uint8_t *value_id = &(data[0]); + uint8_t *value_data = &(data[1]); + switch ( *value_id ) + { + case id_use_split_backspace: + { + *value_data = ( g_config.use_split_backspace ? 1 : 0 ); + break; + } + case id_use_split_left_shift: + { + *value_data = ( g_config.use_split_left_shift ? 1 : 0 ); + break; + } + case id_use_split_right_shift: + { + *value_data = ( g_config.use_split_right_shift ? 1 : 0 ); + break; + } + case id_use_7u_spacebar: + { + *value_data = ( g_config.use_7u_spacebar ? 1 : 0 ); + break; + } + case id_use_iso_enter: + { + *value_data = ( g_config.use_iso_enter ? 1 : 0 ); + break; + } + case id_disable_when_usb_suspended: + { + *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 ); + break; + } + case id_disable_hhkb_blocker_leds: + { + *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 ); + break; + } + case id_disable_after_timeout: + { + *value_data = g_config.disable_after_timeout; + break; + } + case id_brightness: + { + *value_data = g_config.brightness; + break; + } + case id_effect: + { + *value_data = g_config.effect; + break; + } + case id_effect_speed: + { + *value_data = g_config.effect_speed; + break; + } + case id_color_1: + { + _get_color( &(g_config.color_1), value_data ); + break; + } + case id_color_2: + { + _get_color( &(g_config.color_2), value_data ); + break; + } + case id_caps_lock_indicator_color: + { + _get_color( &(g_config.caps_lock_indicator.color), value_data ); + break; + } + case id_caps_lock_indicator_row_col: + { + //*value_data = g_config.caps_lock_indicator.index; + break; + } + case id_layer_1_indicator_color: + { + _get_color( &(g_config.layer_1_indicator.color), value_data ); + break; + } + case id_layer_1_indicator_row_col: + { + //*value_data = g_config.layer_1_indicator.index; + break; + } + case id_layer_2_indicator_color: + { + _get_color( &(g_config.layer_2_indicator.color), value_data ); + break; + } + case id_layer_2_indicator_row_col: + { + //*value_data = g_config.layer_2_indicator.index; + break; + } + case id_layer_3_indicator_color: + { + _get_color( &(g_config.layer_3_indicator.color), value_data ); + break; + } + case id_layer_3_indicator_row_col: + { + //*value_data = g_config.layer_3_indicator.index; + break; + } + case id_alphas_mods: + { + for ( int i=0; i<5; i++ ) + { + *(value_data+i*2) = g_config.alphas_mods[i] >> 8; + *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF; + } + } + } +} + +void backlight_config_set_alphas_mods( uint16_t *alphas_mods ) +{ + for ( int i=0; i<5; i++ ) + { + g_config.alphas_mods[i] = alphas_mods[i]; + } + + backlight_config_save(); +} + +void backlight_config_load(void) +{ + eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); +} + +void backlight_config_save(void) +{ + eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) ); +} + +void backlight_init_drivers(void) +{ + // Initialize I2C + i2c_init(); + IS31FL3731_init( ISSI_ADDR_1 ); + IS31FL3731_init( ISSI_ADDR_2 ); + + for ( int index = 0; index < 72; index++ ) + { + // OR the possible "disabled" cases together, then NOT the result to get the enabled state + // LC6 LD13 not present on Zeal65 +#if defined (RGB_BACKLIGHT_ZEAL65) + bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 + ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15 + ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8 + ( index == 36+6 ) || // LC6 + ( index == 54+13 ) ); // LD13 +#elif defined (RGB_BACKLIGHT_M60_A) + bool enabled = !( + // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A + ( index == 18+6 ) || // LB6 + ( index == 18+7 ) || // LB7 + ( index == 18+8 ) || // LB8 + ( index == 18+15 ) || // LB15 + ( index == 18+16 ) || // LB16 + ( index == 18+17 ) || // LB17 + // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A + ( index == 36+17 ) || // LC17 + ( index == 54+17 ) || // LD17 + ( index == 36+15 ) || // LC15 + ( index == 54+13 ) ); // LD13 +#elif defined (RGB_BACKLIGHT_ZEAL60) + // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60 + bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5 + ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15 + ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8 + ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13 + ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17 + ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17 + ( index == 18+6 ) || // LB6 + ( index == 18+7 ) || // LB7 + ( index == 18+8 ) || // LB8 + ( index == 18+15 ) || // LB15 + ( index == 18+16 ) || // LB16 + ( index == 18+17 ) ); // LB17 +#endif + // This only caches it for later + IS31FL3731_set_led_control_register( index, enabled, enabled, enabled ); + } + // This actually updates the LED drivers + IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 ); + + // TODO: put the 1 second startup delay here? + + // clear the key hits + for ( int led=0; led<72; led++ ) + { + g_key_hit[led] = 255; + } +} + +bool process_record_backlight(uint16_t keycode, keyrecord_t *record) +{ + // Record keypresses for backlight effects + if ( record->event.pressed ) + { + backlight_set_key_hit( record->event.key.row, record->event.key.col ); + } + + switch(keycode) + { + case BR_INC: + if (record->event.pressed) + { + backlight_brightness_increase(); + } + return false; + break; + case BR_DEC: + if (record->event.pressed) + { + backlight_brightness_decrease(); + } + return false; + break; + case EF_INC: + if (record->event.pressed) + { + backlight_effect_increase(); + } + return false; + break; + case EF_DEC: + if (record->event.pressed) + { + backlight_effect_decrease(); + } + return false; + break; + case ES_INC: + if (record->event.pressed) + { + backlight_effect_speed_increase(); + } + return false; + break; + case ES_DEC: + if (record->event.pressed) + { + backlight_effect_speed_decrease(); + } + return false; + break; + case H1_INC: + if (record->event.pressed) + { + backlight_color_1_hue_increase(); + } + return false; + break; + case H1_DEC: + if (record->event.pressed) + { + backlight_color_1_hue_decrease(); + } + return false; + break; + case S1_INC: + if (record->event.pressed) + { + backlight_color_1_sat_increase(); + } + return false; + break; + case S1_DEC: + if (record->event.pressed) + { + backlight_color_1_sat_decrease(); + break; + } + return false; + break; + case H2_INC: + if (record->event.pressed) + { + backlight_color_2_hue_increase(); + } + return false; + break; + case H2_DEC: + if (record->event.pressed) + { + backlight_color_2_hue_decrease(); + } + return false; + break; + case S2_INC: + if (record->event.pressed) + { + backlight_color_2_sat_increase(); + } + return false; + break; + case S2_DEC: + if (record->event.pressed) + { + backlight_color_2_sat_decrease(); + break; + } + return false; + break; + } + + return true; +} + +// Deals with the messy details of incrementing an integer +uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) +{ + int16_t new_value = value; + new_value += step; + return MIN( MAX( new_value, min ), max ); +} + +uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) +{ + int16_t new_value = value; + new_value -= step; + return MIN( MAX( new_value, min ), max ); +} + +void backlight_effect_increase(void) +{ + g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); + backlight_config_save(); +} + +void backlight_effect_decrease(void) +{ + g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX ); + backlight_config_save(); +} + +void backlight_effect_speed_increase(void) +{ + g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 ); + backlight_config_save(); +} + +void backlight_effect_speed_decrease(void) +{ + g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 ); + backlight_config_save(); +} + +void backlight_brightness_increase(void) +{ + g_config.brightness = increment( g_config.brightness, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_brightness_decrease(void) +{ + g_config.brightness = decrement( g_config.brightness, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_hue_increase(void) +{ + g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_hue_decrease(void) +{ + g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_sat_increase(void) +{ + g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_1_sat_decrease(void) +{ + g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_hue_increase(void) +{ + g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_hue_decrease(void) +{ + g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_sat_increase(void) +{ + g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_color_2_sat_decrease(void) +{ + g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 ); + backlight_config_save(); +} + +void backlight_test_led( uint8_t index, bool red, bool green, bool blue ) +{ + for ( int i=0; i<72; i++ ) + { + if ( i == index ) + { + IS31FL3731_set_led_control_register( i, red, green, blue ); + } + else + { + IS31FL3731_set_led_control_register( i, false, false, false ); + } + } +} + +void backlight_debug_led( bool state ) +{ + if (state) + { + // Output high. + DDRE |= (1<<6); + PORTE |= (1<<6); + } + else + { + // Output low. + DDRE &= ~(1<<6); + PORTE &= ~(1<<6); + } +} + +#endif // BACKLIGHT_ENABLED diff --git a/keyboards/zeal60/rgb_backlight.h b/keyboards/zeal60/rgb_backlight.h new file mode 100644 index 000000000..60f2ace51 --- /dev/null +++ b/keyboards/zeal60/rgb_backlight.h @@ -0,0 +1,101 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#if RGB_BACKLIGHT_ENABLED +#else +#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0 +#endif // RGB_BACKLIGHT_ENABLED + +#include <stdint.h> +#include <stdbool.h> + +#include "quantum/color.h" + +typedef struct +{ + HSV color; + uint8_t index; +} backlight_config_indicator; + +typedef struct +{ + bool use_split_backspace:1; // | + bool use_split_left_shift:1; // | + bool use_split_right_shift:1; // | + bool use_7u_spacebar:1; // | + bool use_iso_enter:1; // | + bool disable_when_usb_suspended:1; // | + bool disable_hhkb_blocker_leds:1; // | + bool __pad7:1; // 1 byte + uint8_t disable_after_timeout; // 1 byte + uint8_t brightness; // 1 byte + uint8_t effect; // 1 byte + uint8_t effect_speed; // 1 byte + HSV color_1; // 3 bytes + HSV color_2; // 3 bytes + backlight_config_indicator caps_lock_indicator; // 4 bytes + backlight_config_indicator layer_1_indicator; // 4 bytes + backlight_config_indicator layer_2_indicator; // 4 bytes + backlight_config_indicator layer_3_indicator; // 4 bytes + uint16_t alphas_mods[5]; // 10 bytes +} backlight_config; // = 37 bytes + +void backlight_config_load(void); +void backlight_config_save(void); +void backlight_config_set_value( uint8_t *data ); +void backlight_config_get_value( uint8_t *data ); + +void backlight_init_drivers(void); + +void backlight_timer_init(void); +void backlight_timer_enable(void); +void backlight_timer_disable(void); + +void backlight_set_suspend_state(bool state); +void backlight_set_indicator_state(uint8_t state); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void backlight_update_pwm_buffers(void); + +// Handle backlight specific keycodes +bool process_record_backlight(uint16_t keycode, keyrecord_t *record); + +void backlight_set_key_hit(uint8_t row, uint8_t col); + +void backlight_effect_increase(void); +void backlight_effect_decrease(void); +void backlight_effect_speed_increase(void); +void backlight_effect_speed_decrease(void); + +void backlight_brightness_increase(void); +void backlight_brightness_decrease(void); + +void backlight_color_1_hue_increase(void); +void backlight_color_1_hue_decrease(void); +void backlight_color_1_sat_increase(void); +void backlight_color_1_sat_decrease(void); +void backlight_color_2_hue_increase(void); +void backlight_color_2_hue_decrease(void); +void backlight_color_2_sat_increase(void); +void backlight_color_2_sat_decrease(void); + +void backlight_test_led( uint8_t index, bool red, bool green, bool blue ); +void backlight_debug_led(bool state); + diff --git a/keyboards/zeal60/rgb_backlight_api.h b/keyboards/zeal60/rgb_backlight_api.h new file mode 100644 index 000000000..01827e849 --- /dev/null +++ b/keyboards/zeal60/rgb_backlight_api.h @@ -0,0 +1,42 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +enum backlight_config_value +{ + id_use_split_backspace = 0x01, + id_use_split_left_shift = 0x02, + id_use_split_right_shift = 0x03, + id_use_7u_spacebar = 0x04, + id_use_iso_enter = 0x05, + id_disable_hhkb_blocker_leds = 0x06, + id_disable_when_usb_suspended = 0x07, + id_disable_after_timeout = 0x08, + id_brightness = 0x09, + id_effect = 0x0A, + id_effect_speed = 0x0B, + id_color_1 = 0x0C, + id_color_2 = 0x0D, + id_caps_lock_indicator_color = 0x0E, + id_caps_lock_indicator_row_col = 0x0F, + id_layer_1_indicator_color = 0x10, + id_layer_1_indicator_row_col = 0x11, + id_layer_2_indicator_color = 0x12, + id_layer_2_indicator_row_col = 0x13, + id_layer_3_indicator_color = 0x14, + id_layer_3_indicator_row_col = 0x15, + id_alphas_mods = 0x16 +}; diff --git a/keyboards/zeal60/rgb_backlight_keycodes.h b/keyboards/zeal60/rgb_backlight_keycodes.h new file mode 100644 index 000000000..ba7f03f89 --- /dev/null +++ b/keyboards/zeal60/rgb_backlight_keycodes.h @@ -0,0 +1,34 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +// This is hardcoded at 0x5F00 so it's well after keycode value SAFE_RANGE +enum backlight_keycodes { + BR_INC = 0x5F00, // backlight brightness increase + BR_DEC, // backlight brightness decrease + EF_INC, // backlight effect increase + EF_DEC, // backlight effect decrease + ES_INC, + ES_DEC, + H1_INC, + H1_DEC, + S1_INC, + S1_DEC, + H2_INC, + H2_DEC, + S2_INC, + S2_DEC +}; diff --git a/keyboards/zeal60/rules.mk b/keyboards/zeal60/rules.mk new file mode 100644 index 000000000..c4686f985 --- /dev/null +++ b/keyboards/zeal60/rules.mk @@ -0,0 +1,78 @@ + + +# project specific files +SRC = rgb_backlight.c \ + quantum/color.c \ + drivers/issi/is31fl3731.c \ + drivers/avr/i2c_master.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Boot Section +BOOTLOADER = atmel-dfu + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +CIE1931_CURVE = yes + diff --git a/keyboards/zeal60/zeal60.c b/keyboards/zeal60/zeal60.c new file mode 100644 index 000000000..e516c4dbf --- /dev/null +++ b/keyboards/zeal60/zeal60.c @@ -0,0 +1,341 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "zeal60.h" +#include "zeal60_api.h" + +// Check that no backlight functions are called +#if RGB_BACKLIGHT_ENABLED +#include "rgb_backlight.h" +#endif // BACKLIGHT_ENABLED + +#include "raw_hid.h" +#include "dynamic_keymap.h" +#include "timer.h" +#include "tmk_core/common/eeprom.h" + +bool eeprom_is_valid(void) +{ + return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && + eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION); +} + +void eeprom_set_valid(bool valid) +{ + eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF); + eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF); +} + +#ifdef RAW_ENABLE + +void raw_hid_receive( uint8_t *data, uint8_t length ) +{ + uint8_t *command_id = &(data[0]); + uint8_t *command_data = &(data[1]); + switch ( *command_id ) + { + case id_get_protocol_version: + { + command_data[0] = PROTOCOL_VERSION >> 8; + command_data[1] = PROTOCOL_VERSION & 0xFF; + break; + } + case id_get_keyboard_value: + { + if ( command_data[0] == 0x01 ) + { + uint32_t value = timer_read32(); + command_data[1] = (value >> 24 ) & 0xFF; + command_data[2] = (value >> 16 ) & 0xFF; + command_data[3] = (value >> 8 ) & 0xFF; + command_data[4] = value & 0xFF; + } + else + { + *command_id = id_unhandled; + } + break; + } +#ifdef DYNAMIC_KEYMAP_ENABLE + case id_dynamic_keymap_get_keycode: + { + uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] ); + command_data[3] = keycode >> 8; + command_data[4] = keycode & 0xFF; + break; + } + case id_dynamic_keymap_set_keycode: + { + dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] ); + break; + } + case id_dynamic_keymap_clear_all: + { + dynamic_keymap_clear_all(); + break; + } +#endif // DYNAMIC_KEYMAP_ENABLE +#if RGB_BACKLIGHT_ENABLED + case id_backlight_config_set_value: + { + backlight_config_set_value(command_data); + break; + } + case id_backlight_config_get_value: + { + backlight_config_get_value(command_data); + break; + } + case id_backlight_config_save: + { + backlight_config_save(); + break; + } +#endif // RGB_BACKLIGHT_ENABLED + default: + { + // Unhandled message. + *command_id = id_unhandled; + break; + } + } + + // Return same buffer with values changed + raw_hid_send( data, length ); + +} + +#endif + +void bootmagic_lite(void) +{ + // The lite version of TMK's bootmagic. + // 100% less potential for accidentally making the + // keyboard do stupid things. + + // We need multiple scans because debouncing can't be turned off. + matrix_scan(); + wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCING_DELAY); + matrix_scan(); + + // If the Esc and space bar are held down on power up, + // reset the EEPROM valid state and jump to bootloader. + // Assumes Esc is at [0,0] and spacebar is at [4,7]. + // This isn't very generalized, but we need something that doesn't + // rely on user's keymaps in firmware or EEPROM. + if ( ( matrix_get_row(0) & (1<<0) ) && + ( matrix_get_row(4) & (1<<7) ) ) + { + // Set the Zeal60 specific EEPROM state as invalid. + eeprom_set_valid(false); + // Set the TMK/QMK EEPROM state as invalid. + eeconfig_disable(); + // Jump to bootloader. + bootloader_jump(); + } +} + +void matrix_init_kb(void) +{ + bootmagic_lite(); + + // If the EEPROM has the magic, the data is good. + // OK to load from EEPROM. + if (eeprom_is_valid()) + { +#if RGB_BACKLIGHT_ENABLED + backlight_config_load(); +#endif // RGB_BACKLIGHT_ENABLED + // TODO: do something to "turn on" keymaps in EEPROM? + } + else + { +#if RGB_BACKLIGHT_ENABLED + // If the EEPROM has not been saved before, or is out of date, + // save the default values to the EEPROM. Default values + // come from construction of the zeal_backlight_config instance. + backlight_config_save(); +#endif // RGB_BACKLIGHT_ENABLED + +#ifdef DYNAMIC_KEYMAP_ENABLE + // This saves "empty" keymaps so it falls back to the keymaps + // in the firmware (aka. progmem/flash) + dynamic_keymap_clear_all(); +#endif + + // Save the magic number last, in case saving was interrupted + eeprom_set_valid(true); + } + +#if RGB_BACKLIGHT_ENABLED + // Initialize LED drivers for backlight. + backlight_init_drivers(); + + backlight_timer_init(); + backlight_timer_enable(); +#endif // RGB_BACKLIGHT_ENABLED + + matrix_init_user(); +} + +void matrix_scan_kb(void) +{ +#if RGB_BACKLIGHT_ENABLED + // This only updates the LED driver buffers if something has changed. + backlight_update_pwm_buffers(); +#endif // BACKLIGHT_ENABLED + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) +{ +#if RGB_BACKLIGHT_ENABLED + process_record_backlight(keycode, record); +#endif // BACKLIGHT_ENABLED + + switch(keycode) + { + case FN_MO13: + if (record->event.pressed) + { + layer_on(1); + update_tri_layer(1, 2, 3); + } + else + { + layer_off(1); + update_tri_layer(1, 2, 3); + } + return false; + break; + case FN_MO23: + if (record->event.pressed) + { + layer_on(2); + update_tri_layer(1, 2, 3); + } + else + { + layer_off(2); + update_tri_layer(1, 2, 3); + } + return false; + break; + } + + return process_record_user(keycode, record); +} + +// This overrides the one in quantum/keymap_common.c +uint16_t keymap_function_id_to_action( uint16_t function_id ) +{ + // Zeal60 specific "action functions" are 0xF00 to 0xFFF + // i.e. F(0xF00) to F(0xFFF) are mapped to + // enum zeal60_action_functions by masking last 8 bits. + if ( function_id >= 0x0F00 && function_id <= 0x0FFF ) + { + uint8_t id = function_id & 0xFF; + switch ( id ) + { + case TRIPLE_TAP_1_3: + case TRIPLE_TAP_2_3: + { + return ACTION_FUNCTION_TAP(id); + break; + } + default: + break; + } + } + +#if USE_KEYMAPS_IN_EEPROM + +#if 0 + // This is how to implement actions stored in EEPROM. + // Not yet implemented. Not sure if it's worth the trouble + // before we have a nice GUI for keymap editing. + if ( eeprom_is_valid() && + function_id < 32 ) // TODO: replace magic number + { + uint16_t action = keymap_action_load(function_id); + + // If action is not "empty", return it, otherwise + // drop down to return the one in flash + if ( action != 0x0000 ) // TODO: replace magic number + { + return action; + } + } +#endif + +#endif // USE_KEYMAPS_IN_EEPROM + + return pgm_read_word(&fn_actions[function_id]); +} + + +// Zeal60 specific "action functions" +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) + { + case TRIPLE_TAP_1_3: + case TRIPLE_TAP_2_3: + if (record->event.pressed) + { + layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 ); + + if (record->tap.count && !record->tap.interrupted) + { + if (record->tap.count >= 3) + { + layer_invert(3); + } + } + else + { + record->tap.count = 0; + } + } + else + { + layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 ); + } + break; + } +} + +void led_set_kb(uint8_t usb_led) +{ +#if RGB_BACKLIGHT_ENABLED + backlight_set_indicator_state(usb_led); +#endif // RGB_BACKLIGHT_ENABLED +} + +void suspend_power_down_kb(void) +{ +#if RGB_BACKLIGHT_ENABLED + backlight_set_suspend_state(true); +#endif // RGB_BACKLIGHT_ENABLED +} + +void suspend_wakeup_init_kb(void) +{ +#if RGB_BACKLIGHT_ENABLED + backlight_set_suspend_state(false); +#endif // RGB_BACKLIGHT_ENABLED +} + diff --git a/keyboards/zeal60/zeal60.h b/keyboards/zeal60/zeal60.h new file mode 100644 index 000000000..ef9de7989 --- /dev/null +++ b/keyboards/zeal60/zeal60.h @@ -0,0 +1,93 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#include "rgb_backlight_keycodes.h" +#include "zeal60_keycodes.h" + +#define XXX KC_NO + +#define LAYOUT_60_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K47, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K47, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \ + { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K47, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \ + { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_ansi_split_bs_rshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K47, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_hhkb( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K41, K42, K47, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \ +} + diff --git a/keyboards/zeal60/zeal60_api.h b/keyboards/zeal60/zeal60_api.h new file mode 100644 index 000000000..baa8ac09f --- /dev/null +++ b/keyboards/zeal60/zeal60_api.h @@ -0,0 +1,33 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#define PROTOCOL_VERSION 0x0007 + +enum zeal60_command_id +{ + id_get_protocol_version = 0x01, // always 0x01 + id_get_keyboard_value, + id_set_keyboard_value, + id_dynamic_keymap_get_keycode, + id_dynamic_keymap_set_keycode, + id_dynamic_keymap_clear_all, + id_backlight_config_set_value, + id_backlight_config_get_value, + id_backlight_config_save, + + id_unhandled = 0xFF, +}; diff --git a/keyboards/zeal60/zeal60_keycodes.h b/keyboards/zeal60/zeal60_keycodes.h new file mode 100644 index 000000000..9511801eb --- /dev/null +++ b/keyboards/zeal60/zeal60_keycodes.h @@ -0,0 +1,42 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +// Can't use SAFE_RANGE here, it might change if someone adds +// new values to enum quantum_keycodes. +// Need to keep checking 0x5F10 is still in the safe range. +// TODO: merge this into quantum_keycodes +// Backlight keycodes are in range 0x5F00-0x5F0F +enum zeal60_keycodes { + FN_MO13 = 0x5F10, + FN_MO23 +}; + +// Zeal60 specific "action functions" +// These are only valid IDs in action_function() +// Use FN_TT13, FN_TT23, etc. in keymaps +enum zeal60_action_functions { + TRIPLE_TAP_1_3 = 0x31, + TRIPLE_TAP_2_3 = 0x32 +}; + +// Bitwise OR the above with 0x0F00 to use in F(x) macro +// This reserves the top 256 of the 4096 range of F(x) keycodes, +// leaving the rest for use in fn_actions[] or actions in EEPROM. +#define FN_TT13 F((0x0F00|TRIPLE_TAP_1_3)) +#define FN_TT23 F((0x0F00|TRIPLE_TAP_2_3)) + +#define TG_NKRO MAGIC_TOGGLE_NKRO |