1 files changed, 98 insertions, 0 deletions
diff --git a/keyboards/zen/rev2/config.h b/keyboards/zen/rev2/config.h
new file mode 100644
index 000000000..dc37472f6
--- /dev/null
+++ b/keyboards/zen/rev2/config.h
@@ -0,0 +1,98 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3061
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Legonut
+#define PRODUCT         "Project Zen"
+#define DESCRIPTION     "Split gaming keyboard"
+
+/* key matrix size */
+// Rows are doubled-up
+
+// wiring of each half
+#ifdef CONVERT_TO_PROTON_C
+  #define MATRIX_ROWS 5
+  #define MATRIX_COLS 7
+#else
+  #define MATRIX_ROWS 10
+  #define MATRIX_COLS 7
+#endif
+
+// Proton-C does pin conversion
+#define MATRIX_ROW_PINS { C6, E6, B5, D7, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B3, B1, B2 }
+
+#define NUMBER_OF_ENCODERS 1
+
+#define ENCODERS_PAD_A  { D4 }
+#define ENCODERS_PAD_B  { D2 }
+
+#define RGB_DI_PIN         B6
+#define SOFT_SERIAL_PIN    D3
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGBLED_NUM 34    // Number of LEDs
+
+// If using 90 Degree rotation, increase block cout
+#ifdef OLED_ROTATE90
+  #define OLED_DISPLAY_CUSTOM
+  #define OLED_DISPLAY_WIDTH 128
+  #define OLED_DISPLAY_HEIGHT 32
+  #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
+  #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
+  #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed)
+  #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
+  #define OLED_SOURCE_MAP { 0, 8, 16, 24 }
+  #define OLED_TARGET_MAP { 24, 16, 8, 0 }
+#endif
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION