summaryrefslogtreecommitdiffstats
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/noxary/268/config.h76
-rw-r--r--keyboards/noxary/268/info.json13
-rw-r--r--keyboards/noxary/268/keymaps/default/keymap.c124
-rw-r--r--keyboards/noxary/268/keymaps/sixtyeight/keymap.c124
-rw-r--r--keyboards/noxary/268/noxary268.c1
-rw-r--r--keyboards/noxary/268/noxary268.h20
-rw-r--r--keyboards/noxary/268/readme.md16
-rw-r--r--keyboards/noxary/268/rules.mk56
-rw-r--r--keyboards/noxary/README.md7
9 files changed, 437 insertions, 0 deletions
diff --git a/keyboards/noxary/268/config.h b/keyboards/noxary/268/config.h
new file mode 100644
index 000000000..b2cb95e95
--- /dev/null
+++ b/keyboards/noxary/268/config.h
@@ -0,0 +1,76 @@
+/*
+Copyright 2017 Ruari Armstrong <ukkeyboards@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x4E58
+#define PRODUCT_ID 0x0044
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Noxary
+#define PRODUCT 268
+#define DESCRIPTION QMK keyboard firmware for 268
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F5, F4, F0, F1, D0 }
+#define MATRIX_COL_PINS { C6, C7, F7, F6, E6, B0, D1, B2, B3, D2, D3, D5, D4, D6, D7, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* ws2812b options */
+#define RGB_DI_PIN B5
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 18
+#define RGBLIGHT_HUE_STEP 16
+#define RGBLIGHT_SAT_STEP 16
+#define RGBLIGHT_VAL_STEP 16
+#endif
+
+#endif \ No newline at end of file
diff --git a/keyboards/noxary/268/info.json b/keyboards/noxary/268/info.json
new file mode 100644
index 000000000..55a0ec471
--- /dev/null
+++ b/keyboards/noxary/268/info.json
@@ -0,0 +1,13 @@
+{
+ "keyboard_name": "Noxary 268",
+ "url": "https://www.instagram.com/noxaryco/",
+ "maintainer": "QMK Community",
+ "bootloader": "DFU",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+ }
+ }
+}
diff --git a/keyboards/noxary/268/keymaps/default/keymap.c b/keyboards/noxary/268/keymaps/default/keymap.c
new file mode 100644
index 000000000..c29adcc68
--- /dev/null
+++ b/keyboards/noxary/268/keymaps/default/keymap.c
@@ -0,0 +1,124 @@
+#include "noxary268.h"
+
+// Helpful defines
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL1 1
+#define _FL2 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* _BL: Base Layer(Default) - For ISO enter use ANSI enter
+ * ,----------------------------------------------------------------.
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BSpc| Grv|
+ * |----------------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Del|
+ * |----------------------------------------------------------------|
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #| Ent|PgUp|
+ * |----------------------------------------------------------------|
+ * |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn|
+ * |----------------------------------------------------------------|
+ * |Ctrl|Win |Alt | Space |Alt|Mo(1)|Ctrl|Lef|Dow|Rght|
+ * `----------------------------------------------------------------'
+ */
+ [_BL] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+ /* _FL1: Function Layer 1 - For ISO enter use ANSI enter
+ * ,----------------------------------------------------------------.
+ * | `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |PScr| |
+ * |----------------------------------------------------------------|
+ * | | | | |RST| | | | | | | | | | Ins|
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | |Home|
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | |Bl-|Bl+| |Mute|Vol+| End|
+ * |----------------------------------------------------------------|
+ * | | | | BL_Toggle | | | | |Vol-| |
+ * `----------------------------------------------------------------'
+ */
+ [_FL1] = LAYOUT(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, _______,
+ _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC, BL_INC, _______, KC_MUTE, KC_MUTE, KC_VOLU, KC_END,
+ _______, _______, _______, BL_TOGG, _______, _______, _______, _______, KC_VOLD, _______),
+ /* _FL2: Function Layer 2 - For ISO enter use ANSI enter
+ * ,----------------------------------------------------------------.
+ * | | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | |
+ * `----------------------------------------------------------------'
+ */
+ [_FL2] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+
+};
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+ }
+ else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ DDRB |= (1 << 6); PORTB |= (1 << 6);
+ }
+ else {
+ DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+ }
+ else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+ }
+ else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_KANA)) {
+
+ }
+ else {
+
+ }
+
+}
diff --git a/keyboards/noxary/268/keymaps/sixtyeight/keymap.c b/keyboards/noxary/268/keymaps/sixtyeight/keymap.c
new file mode 100644
index 000000000..eff53a85f
--- /dev/null
+++ b/keyboards/noxary/268/keymaps/sixtyeight/keymap.c
@@ -0,0 +1,124 @@
+#include "noxary268.h"
+
+// Helpful defines
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL1 1
+#define _FL2 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* _BL: Base Layer(Default) - For ISO enter use ANSI enter
+ * ,----------------------------------------------------------------.
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| ~| Del|
+ * |----------------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| BsPc|PgUp|
+ * |----------------------------------------------------------------|
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #| Ent|PgDn|
+ * |----------------------------------------------------------------|
+ * |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift | Up| Fn|
+ * |----------------------------------------------------------------|
+ * |Ctrl|Win |Alt | Space |Win|Ctrl|Ctrl|Lef |Dow|Rght|
+ * `----------------------------------------------------------------'
+ */
+ [_BL] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, MO(_FL1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, KC_RCTL, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+ /* _FL1: Function Layer 1 - For ISO enter use ANSI enter
+ * ,----------------------------------------------------------------.
+ * | |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |PScr| Ins|
+ * |----------------------------------------------------------------|
+ * | | | | |RST| | | | | | | | | |Home|
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | | End|
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | |Bl-|Bl+| |Mute|Vol+| |
+ * |----------------------------------------------------------------|
+ * | | | | BL_Toggle | | | | |Vol-| |
+ * `----------------------------------------------------------------'
+ */
+ [_FL1] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_INS,
+ _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC, BL_INC, _______, KC_MUTE, KC_MUTE, KC_VOLU, _______,
+ _______, _______, _______, BL_TOGG, _______, _______, _______, _______, KC_VOLD, _______),
+ /* _FL2: Function Layer 2 - For ISO enter use ANSI enter
+ * ,----------------------------------------------------------------.
+ * | | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * | | | | | | | | | | |
+ * `----------------------------------------------------------------'
+ */
+ [_FL2] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+
+};
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+ }
+ else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ DDRB |= (1 << 6); PORTB |= (1 << 6);
+ }
+ else {
+ DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+ }
+ else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+ }
+ else {
+
+ }
+
+ if (usb_led & (1 << USB_LED_KANA)) {
+
+ }
+ else {
+
+ }
+
+}
diff --git a/keyboards/noxary/268/noxary268.c b/keyboards/noxary/268/noxary268.c
new file mode 100644
index 000000000..4326b6834
--- /dev/null
+++ b/keyboards/noxary/268/noxary268.c
@@ -0,0 +1 @@
+#include "noxary268.h"
diff --git a/keyboards/noxary/268/noxary268.h b/keyboards/noxary/268/noxary268.h
new file mode 100644
index 000000000..ac2747c1d
--- /dev/null
+++ b/keyboards/noxary/268/noxary268.h
@@ -0,0 +1,20 @@
+#ifndef noxary268_H
+#define noxary268_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \
+ K400, K401, K402, K406, K410, K411, K412, K413, K414, K415 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K215 }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \
+ { K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, K414, K415 } \
+}
+
+#endif
diff --git a/keyboards/noxary/268/readme.md b/keyboards/noxary/268/readme.md
new file mode 100644
index 000000000..68308a475
--- /dev/null
+++ b/keyboards/noxary/268/readme.md
@@ -0,0 +1,16 @@
+# Noxary 268
+
+![268](https://i.imgur.com/rwqp3Au.jpg)
+
+A fully customizable 65% keyboard.
+
+* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)
+* Hardware Supported: 268 PCB
+ * rev1
+* Hardware Availability: [Noxary](https://www.instagram.com/noxaryco/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make noxary/268:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/noxary/268/rules.mk b/keyboards/noxary/268/rules.mk
new file mode 100644
index 000000000..d0b4ce2b5
--- /dev/null
+++ b/keyboards/noxary/268/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no \ No newline at end of file
diff --git a/keyboards/noxary/README.md b/keyboards/noxary/README.md
new file mode 100644
index 000000000..c06dece02
--- /dev/null
+++ b/keyboards/noxary/README.md
@@ -0,0 +1,7 @@
+# Noxary Firmware
+
+All files related to firmware of Noxary Keyboards designed by Rozakiin.
+
+### Keyboards
+
+ 1. 268. Original repo [here](https://github.com/Rozakiin/Noxary_Firmware). Imported by kind [permission](https://github.com/Rozakiin/Noxary_Firmware/issues/1) of @rozakiin
generated by cgit v1.2.3-24-g4f1b (git 2.32.0) at 2024-11-28 15:10:14 +0100